-
300 GHz wireless link based on an integrated Kerr soliton comb
Authors:
Tomohiro Tetsumoto,
Antoine Rolland
Abstract:
A Kerr microresonator frequency comb has enabled the generation of low-phase-noise millimeter- and terahertz-waves in conjunction with an ultrafast photodiode. It is intriguing to employ the new light source in wireless communication at above 100 GHz band, where a carrier signal with a high signal-to-noise ratio is desired to achieve higher data rates. In this study, we demonstrate two simple and…
▽ More
A Kerr microresonator frequency comb has enabled the generation of low-phase-noise millimeter- and terahertz-waves in conjunction with an ultrafast photodiode. It is intriguing to employ the new light source in wireless communication at above 100 GHz band, where a carrier signal with a high signal-to-noise ratio is desired to achieve higher data rates. In this study, we demonstrate two simple and efficient architectures of wireless links based on a microresonator comb. We show experimentally that simultaneous modulation and detection of multiple comb lines result in >10 times stronger modulation signal strength than two-line detection at a receiver. Successful transmission of complex modulation format up to 64 quadrature amplitude modulation proves that a microresonator comb and the proposed modulation method are effective in modern wireless communication.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
Dissipative Kerr soliton photonic terahertz oscillator referenced to a molecule
Authors:
James Greenberg,
Brendan M. Heffernan,
Tomohiro Tetsumoto,
Antoine Rolland
Abstract:
Controlling the coherence between light and matter has enabled the radiation of electromagnetic waves with spectral purity and stability that defines the Système International (SI) second. While transitions between hyperfine levels in atoms are accessible in the microwave and optical domains, faithfully transferring such stability to other frequency ranges of interest is not trivial. Such stabilit…
▽ More
Controlling the coherence between light and matter has enabled the radiation of electromagnetic waves with spectral purity and stability that defines the Système International (SI) second. While transitions between hyperfine levels in atoms are accessible in the microwave and optical domains, faithfully transferring such stability to other frequency ranges of interest is not trivial. Such stability is specifically sought after for the terahertz domain to improve the resolution in very long baseline interferometry and molecular spectroscopy, and advance the technological development of high-speed, high data rate wireless communications. However, there is an evident lack of native frequency references in this spectral range, essential for the consistency of measurements and traceability. To mitigate the frequency drift encompassed in such waves, we experimentally demonstrate that using rotational spectroscopy of nitrous oxide N2O can lead to linewidth reduction up to a thousandfold. A pair of diode lasers, optically injected with a low-noise, chip-based dissipative Kerr soliton, were incident upon a uni-travelling-carrier photodiode. We frequency-locked the emitted terahertz wave to the center of a rotational transition of N2O through phase modulation spectroscopy. A terahertz wave with a 6 Hz linewidth was achieved (fractional frequency stability of $2 \times 10^{-11}$ at 1 second averaging time) while circumventing the need of frequency multiplication or division of frequency standards.
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
Effects of a quiet point on a Kerr microresonator frequency comb
Authors:
Tomohiro Tetsumoto,
Jie Jiang,
Martin E. Fermann,
Gabriele Navickaite,
Michael Geiselmann,
Antoine Rolland
Abstract:
A quiet point, an operating point of pump-resonance detuning that minimizes frequency fluctuation due to nonlinear effects inside a resonator, has been employed for phase noise reduction of a soliton Kerr microresonator frequency comb (microcomb). Naturally, it is expected that the use of the point will also improve performances of a microcomb in terms of frequency stability and faithfulness in a…
▽ More
A quiet point, an operating point of pump-resonance detuning that minimizes frequency fluctuation due to nonlinear effects inside a resonator, has been employed for phase noise reduction of a soliton Kerr microresonator frequency comb (microcomb). Naturally, it is expected that the use of the point will also improve performances of a microcomb in terms of frequency stability and faithfulness in a phase locked loop. In this study, we experimentally investigate the effect in a microcomb with a repetition frequency of 300~GHz. We obtain a lowest fractional frequency instability at a quiet point of $1.5\times 10^{-9}$ at 1 second, which is 44 times lower than free-running instability. Phase-locking of a microcomb to a stabilized fiber comb is demonstrated to evaluate performance in a feedback loop, where in-loop-limited relative fractional frequency instability between the microcomb and the fiber comb of $6.8 \times 10^{-13}$ is obtained as an indicator of the stability limitation.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
300 GHz wave with attosecond-level timing noise
Authors:
Tomohiro Tetsumoto,
Tadao Nagatsuma,
Martin E. Fermann,
Gabriele Navickaite,
Michael Geiselmann,
Antoine Rolland
Abstract:
Optical frequency division (OFD) via optical frequency combs (OFC) has enabled a leap in microwave metrology leading to noise performance never explored before. Extending the method to millimeter-wave (mmW) and terahertz (THz)-wave domain is of great interest. Dissipative Kerr solitons (DKSs) in integrated photonic chips offer a unique feature of delivering OFCs with ultrahigh repetition rates fro…
▽ More
Optical frequency division (OFD) via optical frequency combs (OFC) has enabled a leap in microwave metrology leading to noise performance never explored before. Extending the method to millimeter-wave (mmW) and terahertz (THz)-wave domain is of great interest. Dissipative Kerr solitons (DKSs) in integrated photonic chips offer a unique feature of delivering OFCs with ultrahigh repetition rates from 10 GHz to 1 THz making them relevant gears to perform OFD in the mmW and THz-wave domain. We experimentally demonstrate OFD of an optically-carried 3.6 THz reference down to 300 GHz through a DKS, photodetected with an ultrafast uni-traveling-carrier photodiode (UTC-PD). A new measurement system, based on the characterization of a microwave reference phase-locked to the 300 GHz signal under test, yields attosecond-level timing noise sensitivity, leveraging conventional technical limitations. This work places DKSs as a leading technology in the mmW and THz-wave field promising breakthroughs in fundamental and civilian applications.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
300 GHz generation based on a Kerr microresonator frequency comb stabilized to a low noise microwave reference
Authors:
Tomohiro Tetsumoto,
Fumiya Ayano,
Mark Yeo,
Julian Webber,
Tadao Nagatsuma,
Antoine Rolland
Abstract:
In this letter, we experimentally demonstrate low noise 300GHz wave generation based on a Kerr microresonator frequency comb operating in soliton regime. The spectral purity of a 10GHz GPS-disciplined dielectric resonant oscillator is transferred to the 300GHz repetition rate frequency of the soliton comb through an optoelectronic phase-locked loop. Two adjacent comb lines beat on a uni-travelling…
▽ More
In this letter, we experimentally demonstrate low noise 300GHz wave generation based on a Kerr microresonator frequency comb operating in soliton regime. The spectral purity of a 10GHz GPS-disciplined dielectric resonant oscillator is transferred to the 300GHz repetition rate frequency of the soliton comb through an optoelectronic phase-locked loop. Two adjacent comb lines beat on a uni-travelling carrier photodiode emitting the 300GHz millimeter-wave signal into a waveguide. In an out-of-loop measurement we have measured the 300GHz power spectral density of phase noise to be -88dBc/Hz, -105dBc/Hz at 10kHz, 1MHz Fourier frequency, respectively. The free-running fractional frequency instability at 300GHz is $1 \times 10^{-9}$ at 1 second averaging time. Stabilized to a GPS signal, we report an in-loop residual instability of $2 \times 10^{-15}$ at 1 second which averages down to < $1 \times 10^{-17}$ at 1000 seconds. Such system provides a promising path to the realization of compact, low power consumption millimeter-wave oscillators with low noise performance for out-of-the-lab applications.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Continuous scanning of a dissipative Kerr-microresonator soliton comb for broadband, high resolution spectroscopy
Authors:
Naoya Kuse,
Tomohiro Tetsumoto,
Gabriele Navickaite,
Michael Geiselmann,
Martin E. Fermann
Abstract:
Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) are promising to realize chip scale integration of full soliton comb systems providing high precision, broad spectral coverage and a coherent link to the micro/mm/THz domain with diverse applications coming on line all the time. However, the large soliton comb spacing hampers some applications. For example, for spectros…
▽ More
Dissipative Kerr-microresonator soliton combs (hereafter called soliton combs) are promising to realize chip scale integration of full soliton comb systems providing high precision, broad spectral coverage and a coherent link to the micro/mm/THz domain with diverse applications coming on line all the time. However, the large soliton comb spacing hampers some applications. For example, for spectroscopic applications, there are simply not enough comb lines available to sufficiently cover almost any relevant absorption features. Here, we overcome this limitation by scanning the comb mode spacing by employing PDH locking and a microheater on the microresonator, showing continuous scanning of the soliton comb modes across nearly the full FSR of the microresonator without losing soliton operation, while spectral features with a bandwidth of as small of 5 MHz are resolved. Thus, comb mode scanning allows to cover the whole comb mode spectrum of tens of THz bandwidth with only one chip-scale comb.
△ Less
Submitted 29 July, 2019;
originally announced August 2019.
-
Brillouin lasing in coupled silica toroid microcavities
Authors:
Yoshihiro Honda,
Wataru Yoshiki,
Tomohiro Tetsumoto,
Shun Fujii,
Kentaro Furusawa,
Norihiko Sekine,
Takasumi Tanabe
Abstract:
We demonstrate stimulated Brillouin scattering (SBS) lasing in a strongly coupled microcavity system. By coupling two silica toroid microcavities, we achieve large mode splitting of 11 GHz, whose frequency separation matches the Brillouin frequency shift of silica. The SBS light is resonantly amplified by pumping at the higher frequency side of the supermode splitting resonance. Since the mode spl…
▽ More
We demonstrate stimulated Brillouin scattering (SBS) lasing in a strongly coupled microcavity system. By coupling two silica toroid microcavities, we achieve large mode splitting of 11 GHz, whose frequency separation matches the Brillouin frequency shift of silica. The SBS light is resonantly amplified by pumping at the higher frequency side of the supermode splitting resonance. Since the mode splitting is adjusted by changing the gap distance between the two cavities, our system does not require precise control of a mm-sized cavity diameter to match the free-spectral spacing with the Brillouin frequency shift. It also allows us to use a small cavity, hence our system has the potential to achieve the lasing threshold at a very low power.
△ Less
Submitted 24 December, 2017;
originally announced December 2017.
-
High-Q coupled resonances on a PhC waveguide using a tapered nanofiber with high coupling efficiency
Authors:
Tomohiro Tetsumoto,
Yuta Ooka,
Tanabe Takasumi
Abstract:
We experimentally demonstrate high-Q cavity formation at an arbitrary position on a silicon photonic crystal waveguide by bringing a tapered nanofiber into contact with the surface of the slab. An ultrahigh Q of 5.1 x 10^5 is obtained with a coupling efficiency of 39%, whose resonant wavelength can be finely tuned by 27 pm by adjusting the contact length of the nanofiber. We also demonstrate an ex…
▽ More
We experimentally demonstrate high-Q cavity formation at an arbitrary position on a silicon photonic crystal waveguide by bringing a tapered nanofiber into contact with the surface of the slab. An ultrahigh Q of 5.1 x 10^5 is obtained with a coupling efficiency of 39%, whose resonant wavelength can be finely tuned by 27 pm by adjusting the contact length of the nanofiber. We also demonstrate an extremely high coupling efficiency of 99.6% with a loaded Q of 6.1 x 10^3. In addition, we show that we can obtain an all-pass filter type coupled resonator system, which has the potential to be used for slow light generation.
△ Less
Submitted 14 May, 2015;
originally announced May 2015.
-
High-Q silica zipper cavity for optical radiation pressure driven MOMS switch
Authors:
Tomohiro Tetsumoto,
Takasumi Tanabe
Abstract:
We design a silica zipper cavity that has high optical and mechanical Q (quality factor) values and demonstrate numerically the feasibility of a radiation pressure driven micro opto-mechanical system (MOMS) directional switch. The silica zipper cavity has an optical Q of 6.0x10^4 and an effective mode volume Vmode of 0.66λ^3 when the gap between two cavities is 34 nm. We found that this Q/V_mode v…
▽ More
We design a silica zipper cavity that has high optical and mechanical Q (quality factor) values and demonstrate numerically the feasibility of a radiation pressure driven micro opto-mechanical system (MOMS) directional switch. The silica zipper cavity has an optical Q of 6.0x10^4 and an effective mode volume Vmode of 0.66λ^3 when the gap between two cavities is 34 nm. We found that this Q/V_mode value is five times higher than can be obtained with a single nanocavity design. The mechanical Q (Q_m) is determined by thermo-elastic damping and is 2.0x10^6 in a vacuum at room temperature. The opto-mechanical coupling rate g_OM is as high as 100 GHz/nm, which allows us to move the directional cavity-waveguide system and switch 1550-nm light with 770-nm light by controlling the radiation pressure.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
