-
Exciton diffusion in two-dimensional chiral perovskites
Authors:
Sophia Terres,
Lucas Scalon,
Julius Brunner,
Dominik Horneber,
Johannes Dureth,
Shiyu Huang,
Takashi Taniguchi,
Kenji Watanabe,
Ana Flavia Nogueira,
Sven Hoefling,
Sebastian Klembt,
Yana Vaynzof,
Alexey Chernikov
Abstract:
Two-dimensional (2D) organic-inorganic hybrid perovskites emerged as a versatile platform for light-emitting and photovol-taic applications due to their unique structural design and chemical flexibility. Their properties depend heavily on both the choice of the inorganic lead halide framework and the surrounding organic layers. Recently, the introduction of chiral cations into 2D perovskites has a…
▽ More
Two-dimensional (2D) organic-inorganic hybrid perovskites emerged as a versatile platform for light-emitting and photovol-taic applications due to their unique structural design and chemical flexibility. Their properties depend heavily on both the choice of the inorganic lead halide framework and the surrounding organic layers. Recently, the introduction of chiral cations into 2D perovskites has attracted major interest due to their potential for introducing chirality and tuning the chiro-optical response. Importantly, the optical properties in these materials are dominated by tightly bound excitons that also serve as primary carriers for the energy transport. The mobility of photoinjected excitons is thus important from the perspectives of fundamental material properties and optoelectronic applications, yet remains an open question. Here, we demonstrate exciton propagation in a 2D chiral perovskite methylbenzylammonium lead iodide (MBA2PbI4) using transient photoluminescence microscopy and reveal density-dependent transport over more than 100 nanometers at room temperature with diffusion coeffi-cients as high as 2 cm2/s. We observe two distinct regimes of initially rapid diffusive propagation and subsequent localiza-tion. Moreover, perovskites with enantiomer pure cations are found to exhibit faster exciton diffusion compared to the race-mic mixture, correlated with the impact of the material composition on disorder. Altogether, the observations of efficient exciton diffusion at room temperature highlight the potential of 2D chiral perovskites to merge chiro-optical properties with strong light-matter interaction and efficient energy transport.
△ Less
Submitted 13 August, 2024; v1 submitted 12 August, 2024;
originally announced August 2024.
-
arXiv:2408.05009
[pdf]
physics.optics
cond-mat.mtrl-sci
physics.app-ph
physics.chem-ph
physics.ins-det
Hidden photoexcitations probed by multi-pulse photoluminescence
Authors:
Alexandr Marunchenko,
Jitendra Kumar,
Dmitry Tatarinov,
Anatoly Pushkarev,
Yana Vaynzof,
Ivan Scheblykin
Abstract:
Time-resolved photoluminescence is a validated method for tracking the photoexcited carrier dynamics in luminescent materials. This technique probes the photoluminescence decays upon a periodic excitation by short laser pulses. Herein, we demonstrate that this approach cannot directly detect hidden photoexcitations with much slower dynamics than the photoluminescence decay. We demonstrate a new me…
▽ More
Time-resolved photoluminescence is a validated method for tracking the photoexcited carrier dynamics in luminescent materials. This technique probes the photoluminescence decays upon a periodic excitation by short laser pulses. Herein, we demonstrate that this approach cannot directly detect hidden photoexcitations with much slower dynamics than the photoluminescence decay. We demonstrate a new method based on a multi-pulse excitation scheme that enables an unambiguous detection and an easily interpreted tracking of these hidden species. The multi-pulse excitation consists of a single pulse (Read) followed by a burst of many closely separated pulses (Write) and finally another single pulse (Read). To illustrate the efficacy of the Read-Write-Read excitation scheme, we apply it to metal halide perovskites to directly visualize carrier trapping, extract the concentration of trapped charges and determine the rate constant of trap depopulation. The developed approach allows studying performance-limiting processes in energy devices using a versatile, highly applicable all-optical method.
△ Less
Submitted 9 August, 2024;
originally announced August 2024.
-
Interdot Lead Halide Excess Management in PbS Quantum Dot Solar Cells
Authors:
Miguel Albaladejo-Siguan,
David Becker-Koch,
Elizabeth C. Baird,
Yvonne J. Hofstetter,
Ben P. Carwithen,
Anton Kirch,
Sebastian Reineke,
Artem A. Bakulin,
Fabian Paulus,
Yana Vaynzof
Abstract:
Light-harvesting devices made from PbS quantum dot (QD) absorbers are one of the many promising technologies of third-generation photovoltaics. Their simple, solution-based fabrication together with a highly tunable and broad light absorption makes their application in newly developed solar cells particularly promising. In order to yield devices with reduced voltage and current losses, PbS QDs nee…
▽ More
Light-harvesting devices made from PbS quantum dot (QD) absorbers are one of the many promising technologies of third-generation photovoltaics. Their simple, solution-based fabrication together with a highly tunable and broad light absorption makes their application in newly developed solar cells particularly promising. In order to yield devices with reduced voltage and current losses, PbS QDs need to have strategically passivated surfaces, most commonly achieved through lead iodide and bromide passivation. The interdot spacing is then predominantly filled with residual amorphous lead halide species that remain from the ligand exchange, thus hindering efficient charge transport and reducing device stability. Herein, we demonstrate that a post-treatment by iodide based 2-phenylethlyammonium salts (X-PEAI) and intermediate 2D perovskite formation can be used to manage the lead halide excess in the PbS QD active layer. This treatment results in improved device performance and increased shelf-life stability, demonstrating the importance of interdot spacing management in PbS quantum dot photovoltaics.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
On-liquid-gallium surface synthesis of ultra-smooth conductive metal-organic framework thin films
Authors:
Jinxin Liu,
Yunxu Chen,
Xing Huang,
Yanhan Ren,
Mike Hambsch,
David Bodesheim,
Darius Pohl,
Xiaodong Li,
Marielle Deconinck,
Bowen Zhang,
Markus Löffler,
Zhongquan Liao,
Fengxiang Zhao,
Arezoo Dianat,
Gianaurelio Cuniberti,
Yana Vaynzof,
Junfeng Gao,
Jingcheng Hao,
Stefan C. B. Mannsfeld,
Xinliang Feng,
Renhao Dong
Abstract:
Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electro…
▽ More
Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electrode contact. Here, we develop an on-liquid-gallium surface synthesis (OLGSS) strategy under chemical vapor deposition (CVD) conditions for the controlled growth of two-dimensional conjugated MOF (2D c-MOF) thin films with ten-fold improvement of surface flatness (surface roughness can reach as low as ~2 Å) compared with MOF films grown by the traditional methods. Supported by theoretical modeling, we unveil a layer-by-layer CVD growth mode for constructing flattening surfaces, that is triggered by the high adhesion energy between gallium (Ga) and planar aromatic ligands. We further demonstrate the generality of the as-proposed OLGSS strategy by reproducing such a flat surface over nine different 2D c-MOF films with variable thicknesses (~2 to 208 nm) and large lateral sizes (over 1 cm2). The resultant ultra-smooth 2D c-MOF films enable the formation of high-quality electrical contacts with gold (Au) electrodes, leading to a reduction of contact resistance by over ten orders of magnitude compared to the traditional uneven MOF films. Furthermore, due to the efficient interfacial interaction benifited from the high-quality contacts, the prepared van der Waals heterostructure (vdWH) of OLGSS c-MOF and MoS2 exhibits intriguing photoluminescence (PL) enhancement, PL peak shift and large work function modulation. The establishment of the reliable OLGSS method provides the chances to push the development of MOF electronics and the construction of multicomponent MOF-based heterostructure materials.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Cobalt-based Co$_3$Mo3N/Co$_4$N/Co Metallic Heterostructure as a Highly Active Electrocatalyst for Alkaline Overall Water Splitting
Authors:
Yuanwu Liu,
Lirong Wang,
René Hübner,
Johannes Kresse,
Xiaoming Zhang,
Marielle Deconinick,
Yana Vaynzof,
Inez M. Weidinger,
Alexander Eychmüller
Abstract:
Alkaline water electrolysis is considered a commercially viable option for large-scale hydrogen production. However, this process still faces challenges due to the high voltage (>1.65 V at 10 mA cm$^{-2}$) and its limited stability at higher current densities due to the inefficient electron transport kinetics. Herein, a novel cobalt based metallic heterostructure (Co$_3$Mo3N/Co$_4$N/Co/Co) is desi…
▽ More
Alkaline water electrolysis is considered a commercially viable option for large-scale hydrogen production. However, this process still faces challenges due to the high voltage (>1.65 V at 10 mA cm$^{-2}$) and its limited stability at higher current densities due to the inefficient electron transport kinetics. Herein, a novel cobalt based metallic heterostructure (Co$_3$Mo3N/Co$_4$N/Co/Co) is designed for application for water electrolysis. Operando Raman experiments reveal that the formation of Co$_3$Mo3N/Co$_4$N/Co heterointerface boosts the free water adsorption and dissociation, resulting in a surplus of protons available for subsequent hydrogen production. Furthermore, the altered electronic structure of Co$_3$Mo3N/Co$_4$N/Co heterointerface optimizes the ΔGH of nitrogen atoms at the interface. This synergistic effect between interfacial nitrogen atoms and metal phase cobalt creates highly efficient hydrogen evolution reaction (HER) active sites, thereby enhancing the overall performance. Additionally, the heterostructure exhibits a rapid OH- adsorption rate, coupled with a strong adsorption strength, leading to improved oxygen evolution reaction (OER) performance. Crucially, the metallic heterojunction facilitates fast electron transport, expediting the aforementioned reaction steps and ultimately improving the overall efficiency of water splitting. The water electrolyzer with Co$_3$Mo3N/Co$_4$N/Co/Co as a catalyst exhibits outstanding performance, requiring an impressively low cell voltage of 1.58 V at 10 mA cm$^{-2}$ and maintaining approximately 100% retention over a remarkable 100 h duration at 200 mA cm$^{-2}$. This performance significantly exceeds that of the commercial Pt/C || RuO2 electrolyzer.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Cation exchange synthesis of AgBiS$_2$ quantum dots for highly efficient solar cells
Authors:
Alina Senina,
Anatol Prudnikau,
Angelika Wrzesińska-Lashkova,
Yana Vaynzof,
Fabian Paulus
Abstract:
Silver bismuth sulfide (AgBiS$_2$) nanocrystals have emerged as a promising eco-friendly, low-cost solar cell absorber material. Their direct synthesis often relies on the hot-injection method, requiring the application of high temperatures and vacuum for prolonged times. Here, we demonstrate an alternative synthetic approach via a cation exchange reaction. In the first-step, bis(stearoyl)sulfide…
▽ More
Silver bismuth sulfide (AgBiS$_2$) nanocrystals have emerged as a promising eco-friendly, low-cost solar cell absorber material. Their direct synthesis often relies on the hot-injection method, requiring the application of high temperatures and vacuum for prolonged times. Here, we demonstrate an alternative synthetic approach via a cation exchange reaction. In the first-step, bis(stearoyl)sulfide is used as an air-stable sulfur precursor for the synthesis of small, monodisperse Ag2S nanocrystals at room-temperature. In a second step, bismuth cations are incorporated into the nanocrystal lattice to form ternary AgBiS$_2$ nanocrystals, without altering their size and shape. When implemented into photovoltaic devices, AgBiS$_2$ nanocrystals obtained by cation exchange reach power conversion efficiencies of up to 7.35%, demonstrating the efficacy of the new synthetic approach for the formation of high-quality, ternary semiconducting nanocrystals.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Influence of chemical interactions on the electronic properties of BiOI/organic semiconductor heterojunctions for application in solution-processed electronics
Authors:
Vaidehi Lapalikar,
Preetam Dacha,
Mike Hambsch,
Yvonne J. Hofstetter,
Yana Vaynzof,
Stefan C. B. Mannsfeld,
Michael Ruck
Abstract:
Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its incorporation in these devices in a convenient, scalable, and economical way, BiOI thin films were investigated as part of heterojunctions with various p-type organic…
▽ More
Bismuth oxide iodide (BiOI) has been viewed as a suitable environmentally-friendly alternative to lead-halide perovskites for low-cost (opto-)electronic applications such as photodetectors, phototransistors and sensors. To enable its incorporation in these devices in a convenient, scalable, and economical way, BiOI thin films were investigated as part of heterojunctions with various p-type organic semiconductors (OSCs) and tested in a field-effect transistor (FET) configuration. The hybrid heterojunctions, which combine the respective functionalities of BiOI and the OSCs were processed from solution under ambient atmosphere. The characteristics of each of these hybrid systems were correlated with the physical and chemical properties of the respective materials using a concept based on heteropolar chemical interactions at the interface. Systems suitable for application in lateral transport devices were identified and it was demonstrated how materials in the hybrids interact to provide improved and synergistic properties. These indentified heterojunction FETs are a first instance of successful incorporation of solution-processed BiOI thin films in a three-terminal device. They show a significant threshold voltage shift and retained carrier mobility compared to pristine OSC devices and open up possibilities for future optoelectronic applications.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Ultrafast Vibrational Control of Hybrid Perovskite Devices Reveals the Influence of the Organic Cation on Electronic Dynamics
Authors:
Nathaniel. P. Gallop,
Dmitry R. Maslennikov,
Katelyn P. Goetz,
Zhenbang Dai,
Aaron M. Schankler,
Woongmo Sung,
Satoshi Nihonyanagi,
Tahei Tahara,
Maryna Bodnarchuk,
Maksym Kovalenko,
Yana Vaynzof,
Andrew M. Rappe,
Artem A. Bakulin
Abstract:
Vibrational control (VC) of photochemistry through the optical stimulation of structural dynamics is a nascent concept only recently demonstrated for model molecules in solution. Extending VC to state-of-the-art materials may lead to new applications and improved performance for optoelectronic devices. Metal halide perovskites are promising targets for VC due to their mechanical softness and the r…
▽ More
Vibrational control (VC) of photochemistry through the optical stimulation of structural dynamics is a nascent concept only recently demonstrated for model molecules in solution. Extending VC to state-of-the-art materials may lead to new applications and improved performance for optoelectronic devices. Metal halide perovskites are promising targets for VC due to their mechanical softness and the rich array of vibrational motions of both their inorganic and organic sublattices. Here, we demonstrate the ultrafast VC of FAPbBr3 perovskite solar cells via intramolecular vibrations of the formamidinium cation using spectroscopic techniques based on vibrationally promoted electronic resonance. The observed short (~300 fs) time window of VC highlights the fast dynamics of coupling between the cation and inorganic sublattice. First-principles modelling reveals that this coupling is mediated by hydrogen bonds that modulate both lead halide lattice and electronic states. Cation dynamics modulating this coupling may suppress non-radiative recombination in perovskites, leading to photovoltaics with reduced voltage losses.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Band Structure Engineering in Highly Crystalline Organic Semiconductors
Authors:
Shu-Jen Wang,
Sebastian Hutsch,
Felix Talnack,
Marielle Deconinck,
Shiyu Huang,
Zongbao Zhang,
Hans Kleemann,
Yana Vaynzof,
Stefan C. B. Mannsfeld,
Frank Ortmann,
Karl Leo
Abstract:
Blending of semiconductors for controlling the energy levels (band structure engineering) is an important technique, in particular, for optoelectronic applications. The underlying physics is the delocalized Bloch states, which average over the potential landscape of the blend. For organic semiconductors, it has been shown that two quite different effects, the dielectric constant and electrostatic…
▽ More
Blending of semiconductors for controlling the energy levels (band structure engineering) is an important technique, in particular, for optoelectronic applications. The underlying physics is the delocalized Bloch states, which average over the potential landscape of the blend. For organic semiconductors, it has been shown that two quite different effects, the dielectric constant and electrostatic interaction between molecules, can be used to tune the energy gap and ionization energy of disordered and weakly crystalline organic semiconductor blends. It is so far not known whether the electronic delocalization in organic crystals with large bandwidths can contribute to the energy structure engineering of the blend in a way similar to that in inorganic semiconductors. Here, we investigate the growth of highly ordered organic thin-film blends with a similar chemical structure and show the effect of band structure engineering by spectroscopic methods. We rationalize the experimental results with comprehensive theoretical simulations, showing that the delocalization is a significant effect. Our work paves the way for engineering the band structure of highly ordered organic semiconductor thin films that can be tailored for the desired optoelectronic device application.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
High-efficiency perovskite-organic blend light-emitting diodes featuring self-assembled monolayers as hole-injecting interlayers
Authors:
Murali Gedda,
Despoina Gkeka,
Mohamad Insan Nugraha,
Alberto D. Scaccabarozzi,
Emre Yengel,
Jafar I. Khan,
Iain Hamilton,
Yuanbao Lin,
Marielle Deconinck,
Yana Vaynzof,
Frédéric Laquai,
Donal D. C. Bradley,
Thomas D. Anthopoulos
Abstract:
The high photoluminescence efficiency, color purity, extended gamut, and solution processability make low-dimensional hybrid perovskites attractive for light-emitting diode (PeLED) applications. However, controlling the microstructure of these materials to improve the device performance remains challenging. Here, the development of highly efficient green PeLEDs based on blends of the quasi-2D (q2D…
▽ More
The high photoluminescence efficiency, color purity, extended gamut, and solution processability make low-dimensional hybrid perovskites attractive for light-emitting diode (PeLED) applications. However, controlling the microstructure of these materials to improve the device performance remains challenging. Here, the development of highly efficient green PeLEDs based on blends of the quasi-2D (q2D) perovskite, PEA2Cs4Pb5Br16, and the wide bandgap organic semiconductor 2,7 dioctyl[1] benzothieno[3,2-b]benzothiophene (C8-BTBT) is reported. The presence of C8-BTBT enables the formation of single-crystal-like q2D PEA2Cs4Pb5Br16 domains that are uniform and highly luminescent. Combining the PEA2Cs4Pb5Br16:C8-BTBT with self-assembled monolayers (SAMs) as hole-injecting layers (HILs), yields green PeLEDs with greatly enhanced performance characteristics, including external quantum efficiency up to 18.6%, current efficiency up to 46.3 cd/A, the luminance of 45 276 cd m^-2, and improved operational stability compared to neat PeLEDs. The enhanced performance originates from multiple synergistic effects, including enhanced hole-injection enabled by the SAM HILs, the single crystal-like quality of the perovskite phase, and the reduced concentration of electronic defects. This work highlights perovskite:organic blends as promising systems for use in LEDs, while the use of SAM HILs creates new opportunities toward simpler and more stable PeLEDs.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Photoluminescence Mapping over Laser Pulse Fluence and Repetition Rate as a Fingerprint of Charge and Defect Dynamics in Perovskites
Authors:
Shraddha M Rao,
Alexander Kiligaridis,
Aymen Yangui,
Qingzhi An,
Yana Vaynzof,
Ivan G. Scheblykin
Abstract:
Defects in metal halide perovskites (MHP) are photosensitive, making the observer effect unavoidable when laser spectroscopy methods are applied. Photoluminescence (PL) bleaching and enhancement under light soaking and recovery in dark are examples of the transient phenomena that are consequent to the creation and healing of defects. Depending on the initial sample composition, environment, and ot…
▽ More
Defects in metal halide perovskites (MHP) are photosensitive, making the observer effect unavoidable when laser spectroscopy methods are applied. Photoluminescence (PL) bleaching and enhancement under light soaking and recovery in dark are examples of the transient phenomena that are consequent to the creation and healing of defects. Depending on the initial sample composition, environment, and other factors, the defect nature and evolution can strongly vary, making spectroscopic data analysis prone to misinterpretations. Herein, the use of an automatically acquired dependence of PL quantum yield (PLQY) on the laser pulse repetition rate and pulse fluence as a unique fingerprint of both charge carrier dynamics and defect evolution is demonstrated. A simple visual comparison of such fingerprints allows for assessment of similarities and differences between MHP samples. The study illustrates this by examining methylammonium lead triiodide (MAPbI3) films with altered stoichiometry that just after preparation showed very pronounced defect dynamics at time scale from milliseconds to seconds, clearly distorting the PLQY fingerprint. Upon weeks of storage, the sample fingerprints evolve toward the standard stoichiometric MAPbI3 in terms of both charge carrier dynamics and defect stability. Automatic PLQY mapping can be used as a universal method for assessment of perovskite sample quality.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Sonication-assisted liquid phase exfoliation of two-dimensional CrTe$_3$ under inert conditions
Authors:
Kevin Synnatschke,
Narine Moses Badlyan,
Angelika Wrzesińska,
Guillermo Lozano Onrubia,
Anna-Lena Hansen,
Stefan Wolff,
Hans Tornatzky,
Wolfgang Bensch,
Yana Vaynzof,
Janina Maultzsch,
Claudia Backes
Abstract:
Liquid phase exfoliation (LPE) has been used for the successful fabrication of nanosheets from a large number of van der Waals materials. While this allows to study fundamental changes of material properties' associated with reduced dimensions, it also changes the chemistry of many materials due to a significant increase of the effective surface area, often accompanied with enhanced reactivity and…
▽ More
Liquid phase exfoliation (LPE) has been used for the successful fabrication of nanosheets from a large number of van der Waals materials. While this allows to study fundamental changes of material properties' associated with reduced dimensions, it also changes the chemistry of many materials due to a significant increase of the effective surface area, often accompanied with enhanced reactivity and accelerated oxidation. To prevent material decomposition, LPE and processing in inert atmosphere have been developed, which enables the preparation of pristine nanomaterials, and to systematically study compositional changes over time for different storage conditions. Here, we demonstrate the inert exfoliation of the oxidation-sensitive van der Waals crystal, CrTe$_3$. The pristine nanomaterial was purified and size-selected by centrifugation, nanosheet dimensions in the fractions quantified by atomic force microscopy and studied by Raman, X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX) and photo spectroscopic measurements. We find a dependence of the relative intensities of the CrTe$_3$ Raman modes on the propagation direction of the incident light, which prevents a correlation of the Raman spectral profile to the nanosheet dimensions. XPS and EDX reveal that the contribution of surface oxides to the spectra is reduced after exfoliation compared to the bulk material. Further, the decomposition mechanism of the nanosheets was studied by time-dependent extinction measurements after water titration experiments to initially dry solvents, which suggest that water plays a significant role in the material decomposition.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Elucidating Structure Formation in Highly Oriented Triple Cation Perovskite Films
Authors:
Oscar Telschow,
Niels Scheffczyk,
Alexander Hinderhofer,
Lena Merten,
Ekaterina Kneschaurek,
Florian Bertram,
Qi Zhou,
Markus Löffler,
Frank Schreiber,
Fabian Paulus,
Yana Vaynzof
Abstract:
Metal halide perovskites are an emerging class of crystalline semiconductors of great interest for application in optoelectronics. Their properties are dictated not only by their composition, but also by their crystalline structure and microstructure. While significant efforts were dedicated to the development of strategies for microstructural control, significantly less is known about the process…
▽ More
Metal halide perovskites are an emerging class of crystalline semiconductors of great interest for application in optoelectronics. Their properties are dictated not only by their composition, but also by their crystalline structure and microstructure. While significant efforts were dedicated to the development of strategies for microstructural control, significantly less is known about the processes that govern the formation of their crystalline structure in thin films, in particular in the context of crystalline orientation. In this work, we investigate the formation of highly oriented triple cation perovskite films fabricated by utilizing a range of alcohols as an antisolvent. Examining the film formation by in-situ grazing-incidence wide-angle X-ray scattering reveals the presence of a short-lived highly oriented crystalline intermediate, which we identify as FAI-PbI2-xDMSO. The intermediate phase templates the crystallisation of the perovskite layer, resulting in highly oriented perovskite layers. The formation of this DMSO containing intermediate is triggered by the selective removal of DMF when alcohols are used as an antisolvent, consequently leading to differing degrees of orientation depending on the antisolvent properties. Finally, we demonstrate that photovoltaic devices fabricated from the highly oriented films, are superior to those with a random polycrystalline structure in terms of both performance and stability.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Alloyed Re$_x$Mo$_{1-x}$S$_2$ Nanoflakes with Enlarged Interlayer Distances for Hydrogen Evolution
Authors:
Jing Li,
René Hübner,
Marielle Deconinck,
Ankita Bora,
Markus Göbel,
Dana Schwarz,
Guangbo Chen,
Guangzhao Wang,
Shengyuan A. Yang,
Yana Vaynzof,
Vladimir Lesnyak
Abstract:
Molybdenum sulfide (MoS$_2$) has attracted significant attention due to its great potential as a low-cost and efficient catalyst for the hydrogen evolution reaction. Developing a facile, easily upscalable, and inexpensive approach to produce catalytically active nanostructured MoS$_2$ with a high yield would significantly advance its practical application. Colloidal synthesis offers several advant…
▽ More
Molybdenum sulfide (MoS$_2$) has attracted significant attention due to its great potential as a low-cost and efficient catalyst for the hydrogen evolution reaction. Developing a facile, easily upscalable, and inexpensive approach to produce catalytically active nanostructured MoS$_2$ with a high yield would significantly advance its practical application. Colloidal synthesis offers several advantages over other preparation techniques to overcome the low reaction yield of exfoliation and drawbacks of expensive equipment and processes used in chemical vapor deposition. In this work, we report an efficient synthesis of alloyed Re$_x$Mo$_{1-x}$S$_2$ nanoflakes with an enlarged interlayer distance, among which the composition Re$_{0.55}$Mo$_{0.45}$S$_2$ exhibits excellent catalytic performance with overpotentials as low as 79 mV at 10 mA/cm2 and a small Tafel slope of 42 mV/dec. Density functional theory calculations prove that enlarging the distance between layers in the Re$_x$Mo$_{1-x}$S$_2$alloy can greatly improve its catalytic performance due to a significantly reduced free energy of hydrogen adsorption. The developed approach paves the way to design advanced transition metal dichalcogenide-based catalysts for hydrogen evolution and to promote their large-scale practical application.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Analysis of the Annealing Budget of Metal Oxide Thin-Film Transistors Prepared by an Aqueous Blade-Coating Process
Authors:
Tianyu Tang,
Preetam Dacha,
Katherina Haase,
Joshua Kreß,
Christian Hänisch,
Jonathan Perez,
Yulia Krupskaya,
Alexander Tahn,
Darius Pohl,
Sebastian Schneider,
Felix Talnack,
Mike Hambsch,
Sebastian Reineke,
Yana Vaynzof,
Stefan C. B. Mannsfeld
Abstract:
Metal oxide (MO) semiconductors are widely used in electronic devices due to their high optical transmittance and promising electrical performance. This work describes the advancement toward an eco-friendly, streamlined method for preparing thin-film transistors (TFTs) via a pure water-solution blade-coating process with focus on a low thermal budget. Low temperature and rapid annealing of triple-…
▽ More
Metal oxide (MO) semiconductors are widely used in electronic devices due to their high optical transmittance and promising electrical performance. This work describes the advancement toward an eco-friendly, streamlined method for preparing thin-film transistors (TFTs) via a pure water-solution blade-coating process with focus on a low thermal budget. Low temperature and rapid annealing of triple-coated indium oxide thin-film transistors (3C-TFTs) and indium oxide/zinc oxide/indium oxide thin-film transistors (IZI-TFTs) on a 300 nm SiO2 gate dielectric at 300 $^{\circ}$C for only 60 s yields devices with an average field effect mobility of 10.7 and 13.8 cm2/Vs, respectively. The devices show an excellent on/off ratio (>10^6), and a threshold voltage close to 0 V when measured in air. Flexible MO-TFTs on polyimide substrates with AlOx dielectrics fabricated by rapid annealing treatment can achieve a remarkable mobility of over 10 cm2/Vs at low operating voltage. When using a longer post-coating annealing period of 20 min, high-performance 3C-TFTs (over 18 cm2/Vs) and IZI-TFTs (over 38 cm2/Vs) using MO semiconductor layers annealed at 300 $^{\circ}$C are achieved.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Semitransparent perovskite solar cells with an evaporated ultra-thin perovskite absorber
Authors:
Zongbao Zhang,
Ran Ji,
Xiangkun Jia,
Shu-Jen Wang,
Marielle Deconinck,
Elena Siliavka,
Yana Vaynzof
Abstract:
Metal halide perovskites are of great interest for application in semitransparent solar cells due to their tunable bandgap and high performance. However, fabricating high-efficiency perovskite semitransparent devices with high average visible transmittance (AVT) is challenging because of their high absorption coefficient. Here, we adopt a co-evaporation process to fabricate ultrathin CsPbI3 perovs…
▽ More
Metal halide perovskites are of great interest for application in semitransparent solar cells due to their tunable bandgap and high performance. However, fabricating high-efficiency perovskite semitransparent devices with high average visible transmittance (AVT) is challenging because of their high absorption coefficient. Here, we adopt a co-evaporation process to fabricate ultrathin CsPbI3 perovskite films. Due to the smooth surface and orientated crystal growth of the evaporated perovskite films, we are able to achieve 10 nm thin films with compact and continuous morphology without pinholes. When integrated into a p-i-n device structure of glass/ITO/PTAA/perovskite/PCBM/BCP/Al/Ag with an optimized transparent electrode, these ultrathin layers result in an impressive open-circuit voltage (VOC) of 1.08 V and a fill factor (FF) of 80%. Consequently, a power conversion efficiency of 3.6% with an AVT above 50% is demonstrated, achieved in the 10 nm semitransparent perovskite solar cells, which is the first report for a perovskite device of 10 nm active layer with higher VOC, FF and AVT. These findings demonstrate that evaporation process is a possible way for compact ultrathin perovskite film, which has the potential for future smart windows, light emitting diodes, and tandem device applications.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Solvent-antisolvent interactions in metal halide perovskites
Authors:
Jose Roberto Bautista-Quijano,
Oscar Telschow,
Fabian Paulus,
Yana Vaynzof
Abstract:
The fabrication of metal halide perovskite films using the solvent-engineering method is increasingly common. In this method, the crystallisation of the perovskite layer is triggered by the application of an antisolvent during the spin-coating of a perovskite precursor solution. Herein, we introduce the current state of understanding of the processes involved in the crystallisation of perovskite l…
▽ More
The fabrication of metal halide perovskite films using the solvent-engineering method is increasingly common. In this method, the crystallisation of the perovskite layer is triggered by the application of an antisolvent during the spin-coating of a perovskite precursor solution. Herein, we introduce the current state of understanding of the processes involved in the crystallisation of perovskite layers formed by solvent engineering, focusing in particular on the role of antisolvent properties and solvent-antisolvent interactions. By considering the impact of the Hansen solubility parameters, we propose guidelines for selecting the appropriate antisolvent and outline open questions and future research directions for the fabrication of perovskite films by this method.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Towards low-temperature processing of efficient $γ$-CsPbI$_3$ perovskite solar cells
Authors:
Zongbao Zhang,
Ran Ji,
Yvonne J. Hofstetter,
Marielle Deconinck,
Julius Brunner,
Yanxiu Li,
Qingzhi An,
Yana Vaynzof
Abstract:
Inorganic cesium lead iodide (CsPbI$_3$) perovskite solar cells (PSCs) have attracted enormous attention due to their excellent thermal stability and optical bandgap (~1.73 eV), well-suited for tandem device applications. However, achieving high-performing photovoltaic devices processed at low temperatures is still challenging. Here we reported a new method to fabricate high-efficiency and stable…
▽ More
Inorganic cesium lead iodide (CsPbI$_3$) perovskite solar cells (PSCs) have attracted enormous attention due to their excellent thermal stability and optical bandgap (~1.73 eV), well-suited for tandem device applications. However, achieving high-performing photovoltaic devices processed at low temperatures is still challenging. Here we reported a new method to fabricate high-efficiency and stable $γ$-CsPbI$_3$ PSCs at lower temperatures than was previously possible by introducing the long-chain organic cation salt ethane-1,2-diammonium iodide (EDAI2) and regulating the content of lead acetate (Pb(OAc)2) in the perovskite precursor solution. We find that EDAI2 acts as an intermediate that can promote the formation of $γ$-CsPbI$_3$, while excess Pb(OAc)2 can further stabilize the $γ$-phase of CsPbI$_3$ perovskite. Consequently, improved crystallinity and morphology and reduced carrier recombination are observed in the CsPbI$_3$ films fabricated by the new method. By optimizing the hole transport layer of CsPbI$_3$ inverted architecture solar cells, we demonstrate up to 16.6% efficiencies, surpassing previous reports examining $γ$-CsPbI$_3$ in inverted PSCs. Notably, the encapsulated solar cells maintain 97% of their initial efficiency at room temperature and dim light for 25 days, demonstrating the synergistic effect of EDAI2 and Pb(OAc)2 on stabilizing $γ$-CsPbI$_3$ PSCs.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Remarkable performance recovery in highly defective perovskite solar cells by photo-oxidation
Authors:
Katelyn P. Goetz,
Fabian T. F. Thome,
Qingzhi An,
Yvonne J. Hofstetter,
Tim Schramm,
Aymen Yangui,
Alexander Kiligaridis,
Markus Loeffler,
Alexander D. Taylor,
Ivan G. Scheblykin,
Yana Vaynzof
Abstract:
Exposure to environmental factors is generally expected to cause degradation in perovskite films and solar cells. Herein, we show that films with certain defect profiles can display the opposite effect, healing upon exposure to oxygen under illumination. We tune the iodine content of methylammonium lead triiodide perovskite from understoichiometric to overstoichiometric and expose them to oxygen a…
▽ More
Exposure to environmental factors is generally expected to cause degradation in perovskite films and solar cells. Herein, we show that films with certain defect profiles can display the opposite effect, healing upon exposure to oxygen under illumination. We tune the iodine content of methylammonium lead triiodide perovskite from understoichiometric to overstoichiometric and expose them to oxygen and light prior to the addition of the top layers of the device, thereby examining the defect dependence of their photooxidative response in the absence of storage-related chemical processes. The contrast between the photovoltaic properties of the cells with different defects is stark. Understoichiometric samples indeed degrade, demonstrating performance at 33% of their untreated counterparts, while stoichiometric samples maintain their performance levels. Surprisingly, overstoichiometric samples, which show low current density and strong reverse hysteresis when untreated, heal to maximum performance levels (the same as untreated, stoichiometric samples) upon the photooxidative treatment. A similar, albeit smaller-scale, effect is observed for triple cation and methylammonium-free compositions, demonstrating the general application of this treatment to state-of-the-art compositions. We examine the reasons behind this response by a suite of characterization techniques, finding that the performance changes coincide with microstructural decay at the crystal surface, reorientation of the bulk crystal structure for the understoichiometric cells, and a decrease in the iodine-to-lead ratio of all films. These results indicate that defect engineering is a powerful tool to manipulate the stability of perovskite solar cells.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Bis(stearoyl) Sulfide: A Stable, Odor-free Sulfur Precursor for High-Efficiency Metal Sulfide Quantum Dot Photovoltaics
Authors:
Miguel Albaladejo-Siguan,
Anatol Prudnikau,
Alina Senina,
Elizabeth C. Baird,
Yvonne J. Hofstetter,
Julius Brunner,
Juanzi Shi,
Yana Vaynzof,
Fabian Paulus
Abstract:
The synthesis of metal sulfide nanocrystals is a crucial step in the fabrication of quantum dot (QD) photovoltaics. Control over the quantum dot size during synthesis allows for precise tuning of their optical and electronic properties, making them an appealing choice for electronic applications. This flexibility has led to the implementation of quantum dots in both highly-efficient single junctio…
▽ More
The synthesis of metal sulfide nanocrystals is a crucial step in the fabrication of quantum dot (QD) photovoltaics. Control over the quantum dot size during synthesis allows for precise tuning of their optical and electronic properties, making them an appealing choice for electronic applications. This flexibility has led to the implementation of quantum dots in both highly-efficient single junction solar cells and other optoelectronic devices including photodetectors and transistors. Most commonly, metal sulfide quantum dots are synthesized using the hot-injection method utilizing toxic, and air- and moisture sensitive sulfur source: bis(trimethylsilyl) sulfide (TMS)2S. Here, we present bis(stearoyl) sulfide (St2S) as a new type of air-stable sulfur precursor for the synthesis of sulfide-based QDs, which yields uniform, pure, and stable nanocrystals. Photovoltaic devices based on these QDs are equally efficient as those fabricated by (TMS)2S but exhibit an enhanced operational stability. These results highlight that St2S can be widely adopted for the synthesis of metal sulfide quantum dots for a range of optoelectronic applications.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Perovskite Phase Heterojunction Solar Cells
Authors:
Ran Ji,
Zongbao Zhang,
Yvonne J. Hofstetter,
Robin Buschbeck,
Christian Hänisch,
Fabian Paulus,
Yana Vaynzof
Abstract:
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different materials (e.g. donor/acceptor) or doping (e.g. PN Si junction) or even varying their dimensionality (e.g. 3D/2D). In this work we demonstrate the concept of pha…
▽ More
Modern photovoltaic devices are often based on a heterojunction structure where two components with different optoelectronic properties are interfaced. The properties of each side of the junction can be tuned by either utilizing different materials (e.g. donor/acceptor) or doping (e.g. PN Si junction) or even varying their dimensionality (e.g. 3D/2D). In this work we demonstrate the concept of phase heterojunction (PHJ) solar cells by utilizing two polymorphs of the same material. We demonstrate the approach by forming $γ$-CsPbI3/$β$-CsPbI3 perovskite PHJ solar cells. We find that all of the photovoltaic parameters of the PHJ device significantly surpass those of each of the single-phase devices, resulting in a maximum power conversion efficiency of 20.1%. These improvements originate from the efficient passivation of the $β$-CsPbI3 by the larger bandgap $γ$-CsPbI3, the increase in the built-in potential of the PHJ devices enabled by the energetic alignment between the two phases and the enhanced absorption of light by the PHJ structure. The approach demonstrated here offers new possibilities for the development of photovoltaic devices based on polymorphic materials.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Intermolecular charge transfer enhances the performance of molecular rectifiers
Authors:
Ryan P. Sullivan,
John T. Morningstar,
Eduardo Castellanos,
Robert W. Bradford III,
Yvonne J. Hofstetter,
Yana Vaynzof,
Mark E. Welker,
Oana D. Jurchescu
Abstract:
Molecular-scale diodes made from self-assembled monolayers (SAMs) could complement silicon-based technologies with smaller, cheaper, and more versatile devices. However, advancement of this emerging technology is limited by insufficient electronic performance exhibited by the molecular current rectifiers. We overcome this barrier by exploiting the charge-transfer state that results from co-assembl…
▽ More
Molecular-scale diodes made from self-assembled monolayers (SAMs) could complement silicon-based technologies with smaller, cheaper, and more versatile devices. However, advancement of this emerging technology is limited by insufficient electronic performance exhibited by the molecular current rectifiers. We overcome this barrier by exploiting the charge-transfer state that results from co-assembling SAMs of molecules with strong electron donor and acceptor termini. We obtain a substantial enhancement in current rectification, which correlates with the degree of charge transfer, as confirmed by several complementary techniques. These findings provide a previously unexplored method for manipulating the properties of molecular electronic devices by exploiting donor/acceptor interactions. They also serve as a model test platform for the study of doping mechanisms in organic systems. Our devices have the potential for fast widespread adoption due to their low-cost processing and self-assembly onto silicon substrates, which could allow seamless integration with current technologies.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Photophysics of defect-passivated quasi-2D (PEA)2PbBr4 perovskite using an organic small-molecule
Authors:
Jafar I. Khan,
Murali Gedda,
Mingcong Wang,
Emre Yengel,
Joshua A. Kreß,
Yana Vaynzof,
Thomas D. Anthopoulos,
Frédéric Laquai
Abstract:
2D Ruddlesden - Popper perovskites are promising candidates for energy harvesting applications due to their tunable optical properties and excellent ambient stability. Moreover, they are solution-processable and compatible with upscalable manufacturing via various printing techniques. Unfortunately, such methods often induce large degrees of heterogeneity due to poorly controlled crystallization.…
▽ More
2D Ruddlesden - Popper perovskites are promising candidates for energy harvesting applications due to their tunable optical properties and excellent ambient stability. Moreover, they are solution-processable and compatible with upscalable manufacturing via various printing techniques. Unfortunately, such methods often induce large degrees of heterogeneity due to poorly controlled crystallization. Here, we address this issue by blending the well-known 2D perovskite (PEA)2PbBr4 with an organic small-molecule, namely C8-BTBT, employed as an additive with different blending ratios. Using terahertz (THz) absorption and temperature-dependent photoluminescence (PL) spectroscopy techniques we observe that with the C8-BTBT additive the photophysical properties are altered while the perovskite structure in the film remains unaffected. More precisely, the inclusion of trace amounts of C8-BTBT in the hybrid films results in defect passivation at perovskite platelet boundaries and at the surfaces, as indicated by increased carrier lifetimes and substantially increased photoluminescence quantum yields (PLQY). This in turn improves the responsivity of photodetectors using the 2D perovskite as active layer. Our study highlights a straightforward strategy for fabricating high-quality 2D perovskites via large-area processing techniques.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Structural colors with embedded anti-counterfeit features fabricated by laser-based methods
Authors:
Sascha Teutoburg-Weiss,
Marcos Soldera,
Felix Bouchard,
Joshua Kreß,
Yana Vaynzof,
Andrés Fabián Lasagni
Abstract:
Structural colors can be induced on metals not only to fabricate logos or decorative motives but also to embed anti-counterfeit features for product protection. In this study, stainless steel (EN 1.4301) plates are colorized by growing a thin oxide layer using direct laser writing (DLW) and hidden anti-counterfeit measures are included on their surfaces by direct laser interference patterning (DLI…
▽ More
Structural colors can be induced on metals not only to fabricate logos or decorative motives but also to embed anti-counterfeit features for product protection. In this study, stainless steel (EN 1.4301) plates are colorized by growing a thin oxide layer using direct laser writing (DLW) and hidden anti-counterfeit measures are included on their surfaces by direct laser interference patterning (DLIP) processing. The periodic microstructures resulting from the DLIP treatment have a spatial period of 1 um and act as relief diffraction gratings, featuring a characteristic diffraction pattern. These microstructures are not visible to the human eye but are easily detectable upon shining a coherent beam on the surface. Furthermore, the reflectance over the visible spectrum of the colorized surfaces with and without the DLIP microtexture is measured, giving low differences in the color perception following the so-called "CIE L*a*b*" color space. Finally, a demonstrator is fabricated, in which colorized fields with and without the security features are shown.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Dynamic Phase Enabled Topological Mode Steering in Composite Su-Schrieffer-Heeger Waveguide Arrays
Authors:
Min Tang,
Chi Pang,
Christian N. Saggau,
Haiyun Dong,
Ching Hua Lee,
Ronny Thomale,
Sebastian Klembt,
Ion Cosma Fulga,
Jeroen Van Den Brink,
Yana Vaynzof,
Oliver G. Schmidt,
Jiawei Wang,
Libo Ma
Abstract:
Topological boundary states localize at interfaces whenever the interface implies a change of the associated topological invariant encoded in the geometric phase. The generically present dynamic phase, however, which is energy and time dependent, has been known to be non-universal, and hence not to intertwine with any topological geometric phase. Using the example of topological zero modes in comp…
▽ More
Topological boundary states localize at interfaces whenever the interface implies a change of the associated topological invariant encoded in the geometric phase. The generically present dynamic phase, however, which is energy and time dependent, has been known to be non-universal, and hence not to intertwine with any topological geometric phase. Using the example of topological zero modes in composite Su-Schrieffer-Heeger (c-SSH) waveguide arrays with a central defect, we report on the selective excitation and transition of topological boundary mode based on dynamic phase-steered interferences. Our work thus provides a new knob for the control and manipulation of topological states in composite photonic devices, indicating promising applications where topological modes and their bandwidth can be jointly controlled by the dynamic phase, geometric phase, and wavelength in on-chip topological devices.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
SnS2 thin film with in-situ and controllable Sb doping via atomic layer deposition for optoelectronic applications
Authors:
Dong-Ho Shin,
Jun Yang,
Samik Mukherjee,
Amin Bahrami,
Sebastian Lehmann,
Noushin Nasiri,
Fabian Krahl,
Chi Pang,
Angelika Wrzesińska-Lashkova,
Yana Vaynzof,
Steve Wohlrab,
Alexey Popov,
Kornelius Nielsch
Abstract:
SnS2 stands out as a highly promising two-dimensional material with significant potential for applications in the field of electronics. Numerous attempts have been undertaken to modulate the physical properties of SnS2 by doping with various metal ions. Here, we deposited a series of Sb-doped SnS2 via atomic layer deposition (ALD) super-cycle process and compared its crystallinity, composition, an…
▽ More
SnS2 stands out as a highly promising two-dimensional material with significant potential for applications in the field of electronics. Numerous attempts have been undertaken to modulate the physical properties of SnS2 by doping with various metal ions. Here, we deposited a series of Sb-doped SnS2 via atomic layer deposition (ALD) super-cycle process and compared its crystallinity, composition, and optical properties to those of pristine SnS2. We found that the increase in the concentration of Sb is accompanied by a gradual reduction in the Sn and S binding energies. The work function is increased upon Sb doping from 4.32 eV (SnS2) to 4.75 eV (Sb-doped SnS2 with 9:1 ratio). When integrated into photodetectors, the Sb-doped SnS2 showed improved performances, demonstrating increased peak photoresponsivity values from 19.5 A/W to 27.8 A/W at 405 nm, accompanied by an improvement in response speed. These results offer valuable insights into next-generation optoelectronic applications based on SnS2.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
arXiv:2312.09170
[pdf]
physics.optics
cond-mat.dis-nn
cond-mat.mtrl-sci
nlin.AO
physics.chem-ph
Memlumor: a luminescent memory device for photonic neuromorphic computing
Authors:
Alexandr Marunchenko,
Jitendra Kumar,
Alexander Kiligaridis,
Shraddha M. Rao,
Dmitry Tatarinov,
Ivan Matchenya,
Elizaveta Sapozhnikova,
Ran Ji,
Oscar Telschow,
Julius Brunner,
Anatoly Pushkarev,
Yana Vaynzof,
Ivan G. Scheblykin
Abstract:
Neuromorphic computing promises to transform the current paradigm of traditional computing towards Non-Von Neumann dynamic energy-efficient problem solving. Thus, dynamic memory devices capable of simultaneously performing nonlinear operations (volatile) similar to neurons and also storing information (non-volatile) alike brain synapses are in the great demand. To satisfy these demands, a neuromor…
▽ More
Neuromorphic computing promises to transform the current paradigm of traditional computing towards Non-Von Neumann dynamic energy-efficient problem solving. Thus, dynamic memory devices capable of simultaneously performing nonlinear operations (volatile) similar to neurons and also storing information (non-volatile) alike brain synapses are in the great demand. To satisfy these demands, a neuromorphic platform has to possess intrinsic complexity reflected in the built-in diversity of its physical operation mechanisms. Herein, we propose and demonstrate the novel concept of a memlumor - an all-optical device combining memory and luminophore, and being mathematically a full equivalence of the electrically-driven memristor. By utilizing metal halide perovskites as a memlumor material platform, we demonstrate the synergetic coexistence of both volatile and non-volatile memory effects within a broad timescale from ns to days. We elucidate the origin of such complex response to be related to the phenomena of photodoping and photochemistry activated by a tunable light input and explore several possible realizations of memlumor computing. Leveraging on the existence of a history-dependent photoluminescent quantum yield in various material platforms, the memlumor device concept will trigger multiple new research directions in both material science and optoelectronics. We anticipate that the memlumor, as a new optical dynamic computing element, will add a new dimension to existing optical technologies enabling their transition into application in photonic neuromorphic computing.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Traps and transport resistance: the next frontier for stable state-of-the-art non-fullerene acceptor solar cells
Authors:
Christopher Wöpke,
Clemens Göhler,
Maria Saladina,
Xiaoyan Du,
Li Nian,
Christopher Greve,
Chenhui Zhu,
Kaila M. Yallum,
Yvonne J. Hofstetter,
David Becker-Koch,
Ning Li,
Thomas Heumüller,
Ilya Milekhin,
Dietrich R. T. Zahn,
Christoph J. Brabec,
Natalie Banerji,
Yana Vaynzof,
Eva M. Herzig,
Roderick C. I. MacKenzie,
Carsten Deibel
Abstract:
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduct…
▽ More
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor. We focus our investigation on the thermally accelerated degradation. Our findings show that bulk material properties and interfaces remain remarkably stable, however, aging-induced defect state formation in the active layer remains the primary cause of thermal degradation. The increased trap density leads to higher non-radiative recombination, which limits open-circuit voltage and lowers charge carrier mobility in the photoactive layer. Furthermore, we find the trap-induced transport resistance to be the major reason for the drop in fill factor. Our results suggest that device lifetimes could be significantly increased by marginally suppressing trap formation, leading to a bright future for OSC.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Preserving the Stoichiometry of Triple-Cation Perovskites by Carrier-Gas-Free Antisolvent Spraying
Authors:
Oscar Telschow,
Miguel Albaladejo-Siguan,
Lena Merten,
Alexander D. Taylor,
Katelyn P. Goetz,
Tim Schramm,
O. V. Konovalov,
M. Jankowski,
Alexander Hinderhofer,
Fabian Paulus,
Frank Schreiber,
Yana Vaynzof
Abstract:
The use of antisolvents during the fabrication of solution-processed lead halide perovskite layers is increasingly common. Usually, the antisolvent is applied by pipetting during the spin-coating process, which often irreversibly alters the composition of the perovskite layer, resulting in the formation of PbI2 at the surface and bulk of the perovskite layer. Here, we demonstrate that by applying…
▽ More
The use of antisolvents during the fabrication of solution-processed lead halide perovskite layers is increasingly common. Usually, the antisolvent is applied by pipetting during the spin-coating process, which often irreversibly alters the composition of the perovskite layer, resulting in the formation of PbI2 at the surface and bulk of the perovskite layer. Here, we demonstrate that by applying the antisolvent via carrier-gas free spraying, the stoichiometry of the perovskite layer is far better preserved. Consequently, the photovoltaic performance of triple cation photovoltaic devices fabricated in an inverted architecture is enhanced, mainly due to an increase in the open-circuit voltage. By exploring different volumes of antisolvent, we show that spraying as little as 60 uL results in devices with power conversion efficiencies as high as 21%. Moreover, solar cells with sprayed antisolvent are more stable than those fabricated by pipetting the antisolvent.
△ Less
Submitted 28 January, 2022;
originally announced February 2022.
-
A General Approach to High Efficiency Perovskite Solar Cells by Any Antisolvent
Authors:
Alexander D. Taylor,
Qing Sun,
Katelyn P. Goetz,
Qingzhi An,
Tim Schramm,
Yvonne Hofstetter,
Maximillian Litterst,
Fabian Paulus,
Yana Vaynzof
Abstract:
Deposition of perovskite thin films by antisolvent engineering is one of the most common methods employed in perovskite photovoltaics research. Herein, we report on a general method that allows the fabrication of highly efficient perovskite solar cells by any antisolvent via the manipulation of the antisolvent application rate. Through a detailed structural, compositional and microstructural chara…
▽ More
Deposition of perovskite thin films by antisolvent engineering is one of the most common methods employed in perovskite photovoltaics research. Herein, we report on a general method that allows the fabrication of highly efficient perovskite solar cells by any antisolvent via the manipulation of the antisolvent application rate. Through a detailed structural, compositional and microstructural characterization of perovskite layers fabricated by 14 different antisolvents, we identify two key factors that influence the quality of the perovskite active layer: the solubility of the organic precursors in the antisolvent and its miscibility with the host solvent(s) of the perovskite precursor solution. Depending on these two factors, each antisolvent can be utilized to produce high performance devices reaching power conversion efficiencies (PCEs) that exceed 21%. Moreover, we demonstrate that by employing the optimal antisolvent application procedure, highly efficient solar cells can be fabricated from a broad range of precursor stoichiometries, with either a significant excess or deficiency of organic iodides.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Open-Circuit Voltage Limitation by Surface Recombination in Perovskite Solar Cells
Authors:
Sebastian Reichert,
Katelyn Goetz,
Christopher Wöpke,
Yana Vaynzof,
Carsten Deibel
Abstract:
Fundamental electronic processes such as charge-carrier transport and recombination play a critical role in determining the efficiency of hybrid perovskite solar cells. The presence of mobile ions complicates the development of a clear understanding of these processes as the ions may introduce exceptional phenomena such as hysteresis or giant dielectric constants. As a result, the electronic lands…
▽ More
Fundamental electronic processes such as charge-carrier transport and recombination play a critical role in determining the efficiency of hybrid perovskite solar cells. The presence of mobile ions complicates the development of a clear understanding of these processes as the ions may introduce exceptional phenomena such as hysteresis or giant dielectric constants. As a result, the electronic landscape, including its interaction with mobile ions, is difficult to access both experimentally and analytically. To address this challenge, we applied a series of small perturbation techniques including impedance spectroscopy (IS), intensity-modulated photocurrent spectroscopy (IMPS) and intensity-modulated photovoltage spectroscopy (IMVS) to planar $\mathrm{MAPbI_3}$ perovskite solar cells. Our measurements indicate that both electronic as well as ionic responses can be observed in all three methods and assigned by literature comparison. The results reveal that the dominant charge-carrier loss mechanism is surface recombination by limitation of the quasi-Fermi level splitting. The interaction between mobile ions and the electronic charge carriers leads to a shift of the apparent diode ideality factor from 0.74 to 1.64 for increasing illumination intensity, despite the recombination mechanism remaining unchanged.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Revealing the internal luminescence quantum efficiency of perovskite films via accurate quantification of photon recycling
Authors:
Paul Fassl,
Vincent Lami,
Felix J. Berger,
Lukas M. Falk,
Jana Zaumseil,
Bryce S. Richards,
Ian A. Howard,
Yana Vaynzof,
Ulrich W. Paetzold
Abstract:
The internal luminescence quantum efficiency ($Q_\mathrm{i}^\mathrm{lum}$) provides an excellent assessment of the optoelectronic quality of semiconductors. To determine $Q_\mathrm{i}^\mathrm{lum}$ of perovskite films from the experimentally accessible external luminescence quantum efficiency ($Q_\mathrm{e}^\mathrm{lum}$) it is essential to account for photon recycling, and this requires knowledge…
▽ More
The internal luminescence quantum efficiency ($Q_\mathrm{i}^\mathrm{lum}$) provides an excellent assessment of the optoelectronic quality of semiconductors. To determine $Q_\mathrm{i}^\mathrm{lum}$ of perovskite films from the experimentally accessible external luminescence quantum efficiency ($Q_\mathrm{e}^\mathrm{lum}$) it is essential to account for photon recycling, and this requires knowledge of the photon escape probability ($p_\mathrm{e}$). Here, we establish an analysis procedure based on a curve fitting model that accurately determines $p_\mathrm{e}$ of perovskite films from photoluminescence (PL) spectra measured with a confocal microscope and an integrating sphere setup. We show that scattering-induced outcoupling of initially-trapped PL explains commonly observed red-shifted and broadened PL spectral shapes and leads to $p_\mathrm{e}$ being more than 10% higher in absolute terms compared to earlier assumptions. Applying our model to CH$_3$NH$_3$PbI$_3$ films with exceptionally high $Q_\mathrm{e}^\mathrm{lum}$ up to 47.4% sets a real benchmark for $Q_\mathrm{i}^\mathrm{lum}$ at $78.0 \pm 0.5\%$, revealing there is beyond a factor of two more scope for reducing non-radiative recombination than previously thought.
△ Less
Submitted 24 October, 2020;
originally announced October 2020.
-
Are Shockley-Read-Hall and ABC models valid for lead halide perovskites?
Authors:
Alexander Kiligaridis,
Pavel Frantsuzov,
Aymen Yangui,
Sudipta Seth,
Jun Li,
Qingzhi An,
Yana Vaynzof,
Ivan G. Scheblykin
Abstract:
Metal halide perovskites are an important class of emerging semiconductors. Their charge dynamics is poorly understood due to limited knowledge of defect physics and charge recombination mechanisms. Nevertheless, classical ABC and Shockley-Read-Hall (SRH) models are ubiquitously applied to perovskites without considering their validity. Herein, an advanced technique mapping photoluminescence quant…
▽ More
Metal halide perovskites are an important class of emerging semiconductors. Their charge dynamics is poorly understood due to limited knowledge of defect physics and charge recombination mechanisms. Nevertheless, classical ABC and Shockley-Read-Hall (SRH) models are ubiquitously applied to perovskites without considering their validity. Herein, an advanced technique mapping photoluminescence quantum yield (PLQY) as a function of both the excitation pulse energy and repetition frequency is developed and employed to examine the validity of these models. While ABC and SRH fail to explain the charge dynamics in a broad range of conditions, the addition of Auger recombination and trapping to the SRH model enables a quantitative fitting of PLQY maps and low-power PL decay kinetics, and extracting trap concentrations and efficacies. Higher-power PL kinetics requires the inclusion of additional non-linear processes. The PLQY mapping developed herein is suitable for a comprehensive testing of theories and is applicable to any semiconductor.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Insights from Device Modeling of Perovskite Solar Cells
Authors:
Nir Tessler,
Yana Vaynzof
Abstract:
In this perspective, we explore the insights into the device physics of perovskite solar cells gained from modeling and simulation of these devices. We discuss a range of factors that influence the modeling of perovskite solar cells, including the role of ions, dielectric constant, density of states, and spatial distribution of recombination losses. By focusing on the effect of non-ideal energetic…
▽ More
In this perspective, we explore the insights into the device physics of perovskite solar cells gained from modeling and simulation of these devices. We discuss a range of factors that influence the modeling of perovskite solar cells, including the role of ions, dielectric constant, density of states, and spatial distribution of recombination losses. By focusing on the effect of non-ideal energetic alignment in perovskite photovoltaic devices, we demonstrate a unique feature in low recombination perovskite materials - the formation of an interfacial, primarily electronic, self-induced dipole that results in a significant increase in the built-in potential and device open-circuit voltage. Finally, we discuss the future directions of device modeling in the field of perovskite photovoltaics, describing some of the outstanding open questions in which device simulations can serve as a particularly powerful tool for future advancements in the field.
△ Less
Submitted 29 July, 2020;
originally announced August 2020.
-
Dipolar Hole-Blocking Layers for Inverted Perovskite Solar Cells: Effects of Aggregation and Electron Transport Levels
Authors:
Julian F. Butscher,
Qing Sun,
Yufeng Wu,
Fabian Stuck,
Marvin Hoffmann,
Andreas Dreuw,
Fabian Paulus,
A. Stephen K. Hashmi,
Nir Tessler,
Yana Vaynzof
Abstract:
Herein, we report on the synthesis and investigation of two triazino-isoquinoline tetrafluoroborate electrolytes as hole-blocking layers in methylammonium triiodide perovskite photovoltaic devices with fullerene electron extraction layer. We find that increasing the thickness of the dipolar hole-blocking layer results in a gradual increase in the open-circuit voltage suggesting that aggregation of…
▽ More
Herein, we report on the synthesis and investigation of two triazino-isoquinoline tetrafluoroborate electrolytes as hole-blocking layers in methylammonium triiodide perovskite photovoltaic devices with fullerene electron extraction layer. We find that increasing the thickness of the dipolar hole-blocking layer results in a gradual increase in the open-circuit voltage suggesting that aggregation of the molecules can enhance the dipole induced by the layer. This finding is confirmed by theoretical calculations demonstrating that while both molecules exhibit a similar dipole moment in their isolated state, this dipole is significantly enhanced when they aggregate. Ultra-violet photoemission spectroscopy measurements show that both derivatives exhibit a high ionisation potential of 7 eV, in agreement with their effective hole-blocking nature demonstrated by the devices. However, each of the molecules shows a different electron affinity due to the increased conjugation of one of the derivatives. While the change in electron transport level between the two derivatives is as high as 0.3 eV, the difference in the open-circuit voltage of both types of devices is negligible, suggesting that the electron transport level plays only a minor role in determining the open-circuit voltage of the device. Numerical device simulations confirm that the increase in built-in potential, arising from the high dipole of the electrolyte layer, compensates for the non-ideal energetic alignment of the charge transport levels, resulting in high VOC for a range of electron transport levels. Our study demonstrates that the application of small molecule electrolytes as hole-blocking layer in inverted architecture perovskite solar cells is a powerful tool to enhance the open-circuit voltage of the devices and provides useful guidelines for designing future generations of such compounds.
△ Less
Submitted 29 July, 2020;
originally announced August 2020.
-
Enhancing the Open-Circuit Voltage of Perovskite Solar Cells by Embedding Molecular Dipoles within their Hole-Blocking Layer
Authors:
Julian F. Butscher,
Sebastian Intorp,
Joshua Kress,
Qingzhi An,
Yvonne J. Hofstetter,
Nikolai Hippchen,
Fabian Paulus,
Uwe H. F. Bunz,
Nir Tessler,
Yana Vaynzof
Abstract:
Engineering the energetics of perovskite photovoltaic devices through the deliberate introduction of dipoles to control the built-in potential of the devices offers the opportunity to enhance their performance without the need to modify the active layer itself. In this work, we demonstrate how the incorporation of molecular dipoles into the bathocuproine (BCP) hole-blocking layer of inverted perov…
▽ More
Engineering the energetics of perovskite photovoltaic devices through the deliberate introduction of dipoles to control the built-in potential of the devices offers the opportunity to enhance their performance without the need to modify the active layer itself. In this work, we demonstrate how the incorporation of molecular dipoles into the bathocuproine (BCP) hole-blocking layer of inverted perovskite solar cells improves the device open-circuit voltage (VOC) and consequently, its performance. We explore a series of four thiaazulenic derivatives that exhibit increasing dipole moments and demonstrate that these molecules can be introduced into the solution-processed BCP layer to effectively increase the built-in potential within the device, without altering any of the other device layers. As a result the VOC of the devices is enhanced by up to 130 mV with larger dipoles resulting in higher VOCs. To investigate the limitations of this approach, we employ numerical device simulations that demonstrate that the highest dipole derivatives used in this work eliminate all limitations on the VOC stemming from the built-in potential of the device.
△ Less
Submitted 29 July, 2020;
originally announced August 2020.
-
Tuning Spin Current Injection at Ferromagnet/Non-Magnet Interfaces by Molecular Design
Authors:
Angela Wittmann,
Guillaume Schweicher,
Katharina Broch,
Jiri Novak,
Vincent Lami,
David Cornil,
Erik R. McNellis,
Olia Zadvorna,
Deepak Venkateshvaran,
Kazuo Takimiya,
Yves H. Geerts,
Jerome Cornil,
Yana Vaynzof,
Jairo Sinova,
Shun Watanabe,
Henning Sirringhaus
Abstract:
There is a growing interest in utilizing the distinctive material properties of organic semiconductors for spintronic applications. Here, we explore injection of pure spin current from Permalloy into a small molecule system based on dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) at ferromagnetic resonance. The unique tunability of organic materials by molecular design allows us to study the i…
▽ More
There is a growing interest in utilizing the distinctive material properties of organic semiconductors for spintronic applications. Here, we explore injection of pure spin current from Permalloy into a small molecule system based on dinaphtho[2,3-b:2,3-f]thieno[3,2-b]thiophene (DNTT) at ferromagnetic resonance. The unique tunability of organic materials by molecular design allows us to study the impact of interfacial properties on the spin injection efficiency systematically. We show that both, spin injection efficiency at the interface as well as the spin diffusion length can be tuned sensitively by the interfacial molecular structure and side chain substitution of the molecule.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Energy Level Alignment in Ternary Organic Solar Cells
Authors:
Vincent Lami,
Yvonne J. Hofstetter,
Julian F. Butscher,
Yana Vaynzof
Abstract:
Ternary organic solar cells (TOSC) are currently under intensive investigation, recently reaching a record efficiency of 17.1%. The origin of the device open-circuit voltage (VOC), already a multifaceted issue in binary OSC, is even more complex in TOSCs. Herein, we investigate two ternary systems with one donor (D) and two acceptor materials (A1, A2) including fullerene and non-fullerene acceptor…
▽ More
Ternary organic solar cells (TOSC) are currently under intensive investigation, recently reaching a record efficiency of 17.1%. The origin of the device open-circuit voltage (VOC), already a multifaceted issue in binary OSC, is even more complex in TOSCs. Herein, we investigate two ternary systems with one donor (D) and two acceptor materials (A1, A2) including fullerene and non-fullerene acceptors. By varying the ratio between the two acceptors, we find the VOC to be gradually tuned between those of the two binary systems, D:A1 and D:A2. To investigate the origin of this change, we employ ultra-violet photoemission spectroscopy (UPS) depth profiling, which is used to estimate the photovoltaic gap in the ternary systems. Our results reveal an excellent agreement between the estimated photovoltaic gap and the VOC for all mixing ratios, suggesting that the energetic alignment between the blend components varies depending on the ratio D:A1:A2. Furthermore, our results indicate that the sum of radiative and non-radiative losses in these ternary systems is independent of the blend composition. Finally, we demonstrate the superiority of UPS over X-ray photoemission spectroscopy (XPS) depth profiling in resolving compositional profiles for material combinations with very similar chemical, but dissimilar electronic structures, as common in TOSCs.
△ Less
Submitted 31 July, 2020;
originally announced July 2020.
-
Shining Light on Photoluminescence Properties of Metal Halide Perovskites
Authors:
Katelyn P. Goetz,
Alexander D. Taylor,
Fabian Paulus,
Yana Vaynzof
Abstract:
Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, among others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect…
▽ More
Lead halide perovskites are a remarkable class of materials that have emerged over the past decade as being suitable for application in a broad range of devices, such as solar cells, light-emitting diodes, lasers, transistors, and memory devices, among others. While they are often solution-processed semiconductors deposited at low temperatures, perovskites exhibit properties one would only expect from highly pure inorganic crystals that are grown at high temperatures. This unique phenomenon has resulted in fast-paced progress toward record device performance; unfortunately, the basic science behind the remarkable nature of these materials is still not well understood. This review assesses the current understanding of the photoluminescence (PL) properties of metal halide perovskite materials and highlights key areas that require further research. Furthermore, the need to standardize the methods for characterization of PL in order to improve comparability, reliability and reproducibility of results is emphasized.
△ Less
Submitted 31 July, 2020;
originally announced July 2020.
-
Sequentially Deposited versus Conventional Nonfullerene Organic Solar Cells: Interfacial Trap States, Vertical Stratification, and Exciton Dissociation
Authors:
Jiangbin Zhang,
Moritz H. Futscher,
Vincent Lami,
Felix U. Kosasih,
Changsoon Cho,
Qinying Gu,
Aditya Sadhanala,
Andrew J. Pearson,
Bin Kan,
Giorgio Divitini,
Xiangjian Wan,
Daniel Credgington,
Neil C. Greenham,
Yongsheng Chen,
Caterina Ducati,
Bruno Ehrler,
Yana Vaynzof,
Richard H. Friend,
Artem A. Bakulin
Abstract:
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, cri…
▽ More
Bulk-heterojunction (BHJ) non-fullerene organic solar cells prepared from sequentially deposited donor and acceptor layers (sq-BHJ) have recently been promising to be highly efficient, environmentally friendly, and compatible with large area and roll-to-toll fabrication. However, the related photophysics at donor-acceptor interface and the vertical heterogeneity of donor-acceptor distribution, critical for exciton dissociation and device performance, are largely unexplored. Herein, steady-state and time-resolved optical and electrical techniques are employed to characterize the interfacial trap states. Correlation with the luminescent efficiency of interfacial states and its non-radiative recombination, interfacial trap states are characterized to be about 50% more populated in the sq-BHJ than as-cast BHJ (c-BHJ), which probably limits the device voltage output. Cross-sectional energy-dispersive X-ray spectroscopy and ultraviolet photoemission spectroscopy depth profiling directly vizualize the donor-acceptor vertical stratification with a precision of 1-2 nm. From the proposed "needle" model, the high exciton dissociation efficiency is rationalized. Our study highlights the promise of sequential deposition to fabricate efficient solar cells, and points towards improving the voltage output and overall device performance via eliminating interfacial trap states.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Ligand Dependent Oxidation Dictates the Performance Evolution of High Efficiency PbS Quantum Dot Solar Cells
Authors:
David Becker-Koch,
Miguel Albaladejo Siguan,
Vincent Lami,
Fabian Paulus,
Hengyang Xiang,
Zhuoying Chen,
Yana Vaynzof
Abstract:
Lead sulfide (PbS) quantum dot (QD) photovoltaics have reached impressive efficiencies of 12%, making them particularly promising for future applications. Like many other types of emerging photovoltaic devices, their environmental instability remains the Achilles heel of this technology. In this work, we demonstrate that the degradation processes in PbS QDs which are exposed to oxygenated environm…
▽ More
Lead sulfide (PbS) quantum dot (QD) photovoltaics have reached impressive efficiencies of 12%, making them particularly promising for future applications. Like many other types of emerging photovoltaic devices, their environmental instability remains the Achilles heel of this technology. In this work, we demonstrate that the degradation processes in PbS QDs which are exposed to oxygenated environments are tightly related to the choice of ligands, rather than their intrinsic properties. In particular, we demonstrate that while 1,2-ethanedithiol (EDT) ligands result in significant oxidation of PbS, lead iodide/lead bromide (PbX2) coated PbS QDs show no signs of oxidation or degradation. Consequently, since the former is ubiquitously used as a hole extraction layer in QD solar cells, it is predominantly responsible for the device performance evolution. The oxidation of EDT-PbS QDs results in a significantly reduced effective QD size, which triggers two competing processes: improved energetic alignment that enhances electron blocking, but reduced charge transport through the layer. At early times, the former process dominates, resulting in the commonly reported, but so far not fully explained initial increase in performance, while the latter governs the onset of degradation and deterioration of the photovoltaic performance. Our work highlights that the stability of PbS quantum dot solar cells can be significantly enhanced by an appropriate choice of ligands for all device components.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Efficient and Stable PbS Quantum Dot Solar Cells by Triple-Cation Perovskite Passivation
Authors:
Miguel Albaladejo-Siguan,
David Becker-Koch,
Alexander D. Taylor,
Qing Sun,
Vincent Lami,
Pola Goldberg Oppenheimer,
Fabian Paulus,
Yana Vaynzof
Abstract:
Solution-processed quantum dots (QDs) have a high potential for fabricating low cost, flexible and large-scale solar energy harvesting devices. It has recently been demonstrated that hybrid devices employing a single monovalent cation perovskite solution for PbS QD surface passivation exhibit enhanced photovoltaic performance when compared to standard ligand passivation. Herein we demonstrate that…
▽ More
Solution-processed quantum dots (QDs) have a high potential for fabricating low cost, flexible and large-scale solar energy harvesting devices. It has recently been demonstrated that hybrid devices employing a single monovalent cation perovskite solution for PbS QD surface passivation exhibit enhanced photovoltaic performance when compared to standard ligand passivation. Herein we demonstrate that the use of a triple cation Cs0.05(MA0.17FA0.83)0.95Pb(I0.9Br0.1)3 perovskite composition for surface passivation of the quantum dots results in highly efficient solar cells, which maintain 96 % of their initial performance after 1200h shelf storage. We confirm perovskite shell formation around the PbS nanocrystals by a range of spectroscopic techniques as well as high-resolution transmission electron microscopy. We find that the triple cation shell results in a favorable energetic alignment to the core of the dot, resulting in reduced recombination due to charge confinement without limiting transport in the active layer. Consequently, photovoltaic devices fabricated via a single-step film deposition reached a maximum AM1.5G power conversion efficiency of 11.3 % surpassing most previous reports of PbS solar cells employing perovskite passivation.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Energy Transfer to a Stable Donor Suppresses Degradation in Organic Solar Cells
Authors:
Andreas Weu,
Rhea Kumar,
Julian F. Butscher,
Vincent Lami,
Fabian Paulus,
Artem A. Bakulin,
Yana Vaynzof
Abstract:
Despite many advances towards improving the stability of organic photovoltaic devices, environmental degradation under ambient conditions remains a challenging obstacle for future application. Particularly conventional systems employing fullerene derivatives are prone to oxidise under illumination, limiting their applicability. Herein, we report on the environmental stability of the small molecule…
▽ More
Despite many advances towards improving the stability of organic photovoltaic devices, environmental degradation under ambient conditions remains a challenging obstacle for future application. Particularly conventional systems employing fullerene derivatives are prone to oxidise under illumination, limiting their applicability. Herein, we report on the environmental stability of the small molecule donor DRCN5T together with the fullerene acceptor PC70BM. We find that this system exhibits exceptional device stability, mainly due to almost constant short-circuit current. By employing ultrafast femtosecond transient absorption spectroscopy we attribute this remarkable stability to two separate mechanisms: 1) DRCN5T exhibits high intrinsic resistance towards external factors, showing no signs of deterioration. 2) The highly sensitive PC70BM is stabilised against degradation by the presence of DRCN5T through ultrafast long-range energy transfer to the donor, rapidly quenching the fullerene excited states which are otherwise precursors for chemical oxidation. We propose that this photoprotective mechanism be utilised to improve the device stability of other systems, including non-fullerene acceptors and ternary blends.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Effect of Precursor Stoichiometry on the Performance and Stability of MAPbBr3 Photovoltaic Devices
Authors:
Lukas M. Falk,
Katelyn P. Goetz,
Vincent Lami,
Qingzhi An,
Paul Fassl,
Jonas Herkel,
Fabian Thome,
Alexander D. Taylor,
Fabian Paulus,
Yana Vaynzof
Abstract:
The wide band gap methylammonium lead bromide perovskite is promising for applications in tandem solar cells and light-emitting diodes. Despite its utility, there is only a limited understanding of its reproducibility and stability. Herein, the dependence of the properties, performance, and shelf storage of thin films and devices on minute changes to the precursor solution stoichiometry is examine…
▽ More
The wide band gap methylammonium lead bromide perovskite is promising for applications in tandem solar cells and light-emitting diodes. Despite its utility, there is only a limited understanding of its reproducibility and stability. Herein, the dependence of the properties, performance, and shelf storage of thin films and devices on minute changes to the precursor solution stoichiometry is examined in detail. Although photovoltaic cells based on these solution changes exhibit similar initial performance, the shelf-storage depends strongly on the precursor solution stoichiometry. While all devices exhibit some degree of healing, the bromide-deficient films show a remarkable improvement, more than doubling in their photoconversion efficiency. Photoluminescence spectroscopy experiments performed under different atmospheres suggest that this increase is due in part to a trap healing mechanism that occurs upon exposure to the environment. Our results highlight the importance of understanding and manipulating defects in lead halide perovskites to produce long-lasting, stable devices.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Visualising the Vertical Energetic Landscape in Organic Photovoltaics
Authors:
Vincent Lami,
Andreas Weu,
Jiangbin Zhang,
Yongsheng Chen,
Zhuping Fei,
Martin Heeney,
Richard H. Friend,
Yana Vaynzof
Abstract:
Energy level diagrams in organic electronic devices play a crucial role in device performance and interpretation of device physics. In the case of organic solar cells, it has become routine to estimate the photovoltaic gap of the donor:acceptor blend using the energy values measured on the individual blend components, resulting in a poor agreement with the corresponding open-circuit voltage of the…
▽ More
Energy level diagrams in organic electronic devices play a crucial role in device performance and interpretation of device physics. In the case of organic solar cells, it has become routine to estimate the photovoltaic gap of the donor:acceptor blend using the energy values measured on the individual blend components, resulting in a poor agreement with the corresponding open-circuit voltage of the device. To address this issue, we developed a method that allows a direct visualisation of the vertical energetic landscape in the blend, obtained by combining ultraviolet photoemission spectroscopy and argon cluster etching. We investigate both model and high-performance photovoltaic systems and demonstrate that the resulting photovoltaic gaps are in close agreement with the measured CT energies and open-circuit voltages. Furthermore, we show that this method allows us to study the evolution of the energetic landscape upon environmental degradation, critically important for understanding degradation mechanisms and development of mitigation strategies.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Probing the ionic defect landscape in halide perovskite solar cells
Authors:
Sebastian Reichert,
Qingzhi An,
Young-Won Woo,
Aron Walsh,
Yana Vaynzof,
Carsten Deibel
Abstract:
Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduce…
▽ More
Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduced by fractionally changing the precursor stoichiometry. Our results highlight the profound influence of defects on the electronic landscape, exemplified by their impact on the device built-in potential, and consequently, the open-circuit voltage. Even low ion densities can have an impact on the electronic landscape when both cations and anions are considered as mobile. Moreover, we find that all measured ionic defects fulfil the Meyer--Neldel rule with a characteristic energy connected to the underlying ion hopping process. These findings support a general categorization of defects in halide perovskite compounds.
△ Less
Submitted 30 November, 2020; v1 submitted 14 May, 2020;
originally announced May 2020.
-
Improved evaluation of deep-level transient spectroscopy on perovskite solar cells reveals ionic defect distribution
Authors:
Sebastian Reichert,
Jens Flemming,
Qingzhi An,
Yana Vaynzof,
Jan-Frederik Pietschmann,
Carsten Deibel
Abstract:
One of the key challenges for future development of efficient and stable metal halide perovskite solar cells is related to the migration of ions in these materials. Mobile ions have been linked to the observation of hysteresis in the current--voltage characteristics, shown to reduce device stability against degradation and act as recombination centers within the band gap of the active layer. In th…
▽ More
One of the key challenges for future development of efficient and stable metal halide perovskite solar cells is related to the migration of ions in these materials. Mobile ions have been linked to the observation of hysteresis in the current--voltage characteristics, shown to reduce device stability against degradation and act as recombination centers within the band gap of the active layer. In the literature one finds a broad spread of reported ionic defect parameters (e.g. activation energies) for seemingly similar perovskite materials, rendering the identification of the nature of these species difficult. In this work, we performed temperature dependent deep-level transient spectroscopy (DLTS) measurements on methylammonium lead iodide perovskite solar cells and developed a extended regularization algorithm for inverting the Laplace transform. Our results indicate that mobile ions form a distribution of emission rates (i.e. a distribution of diffusion constants) for each observed ionic species, which may be responsible for the differences in the previously reported defect parameters. Importantly, different DLTS modes such as optical and current DLTS yield the same defect distributions. Finally the comparison of our results with conventional boxcar DLTS and impedance spectroscopy (IS) verifies our evaluation algorithm.
△ Less
Submitted 21 January, 2020; v1 submitted 10 October, 2019;
originally announced October 2019.
-
Enhancing the Open-Circuit Voltage of Perovskite Solar Cells by up to 120 mV using π-Extended Phosphoniumfluorene Electrolytes as Hole Blocking Layers
Authors:
Qingzhi An,
Qing Sun,
Andreas Weu,
David Becker-Koch,
Fabian Paulus,
Sebastian Arndt,
Fabian Stuck,
A. Stephen K. Hashmi,
Nir Tessler,
Yana Vaynzof
Abstract:
Four π-extended phosphoniumfluorene electrolytes (π-PFEs) are introduced as hole-blocking layers (HBL) in inverted architecture planar perovskite solar cells (PVSCs) with the structure of ITO/PEDOT:PSS/MAPbI3/PCBM/HBL/Ag. The deep-lying highest occupied molecular orbital (HOMO) energy level of the π-PFEs effectively blocks holes, decreasing contact recombination. We demonstrate that the incorporat…
▽ More
Four π-extended phosphoniumfluorene electrolytes (π-PFEs) are introduced as hole-blocking layers (HBL) in inverted architecture planar perovskite solar cells (PVSCs) with the structure of ITO/PEDOT:PSS/MAPbI3/PCBM/HBL/Ag. The deep-lying highest occupied molecular orbital (HOMO) energy level of the π-PFEs effectively blocks holes, decreasing contact recombination. We demonstrate that the incorporation of π-PFEs introduces a dipole moment at the PCBM/Ag interface, resulting in a significant enhancement of the built-in potential of the device. This enhancement results in an increase in the open-circuit voltage of the device by up to 120 mV, when compared to the commonly used bathocuproine HBL. The results are confirmed both experimentally and by numerical simulation. Our work demonstrates that interfacial engineering of the transport layer/contact interface by small molecule electrolytes is a promising route to suppress non-radiative recombination in perovskite devices and compensate for a non-ideal energetic alignment at the hole-transport layer/perovskite interface.
△ Less
Submitted 13 June, 2019;
originally announced June 2019.
-
Fractional Deviations in Precursor Stoichiometry Dictate the Properties, Performance and Stability of Perovskite Photovoltaic Devices
Authors:
Paul Fassl,
Vincent Lami,
Alexandra Bausch,
Zhiping Wang,
Matthew T. Klug,
Henry J. Snaith,
Yana Vaynzof
Abstract:
The last five years have witnessed a remarkable progress in the field of lead halide perovskite materials and devices. Examining the existing body of literature reveals staggering inconsistencies in the reported results among different research groups with a particularly wide spread in the photovoltaic performance and stability of devices. In this work we demonstrate that fractional, quite possibl…
▽ More
The last five years have witnessed a remarkable progress in the field of lead halide perovskite materials and devices. Examining the existing body of literature reveals staggering inconsistencies in the reported results among different research groups with a particularly wide spread in the photovoltaic performance and stability of devices. In this work we demonstrate that fractional, quite possibly unintentional, deviations in the precursor solution stoichiometry can cause significant changes in the properties of the perovskite layer as well as in the performance and stability of perovskite photovoltaic devices. We show that while the absorbance and morphology of the layers remains largely unaffected, the surface composition and energetics, crystallinity, emission efficiency, energetic disorder and storage stability are all very sensitive to the precise stoichiometry of the precursor solution. Our results elucidate the origin of the irreproducibility and inconsistencies of reported results among different groups as well as the wide spread in device performance even within individual studies. Finally, we propose a simple experimental method to identify the exact stoichiometry of the perovskite layer that researchers can employ to confirm their experiments are performed consistently without unintentional variations in precursor stoichiometry.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Quantifying the Damage Induced by XPS Depth Profiling of Organic Conjugated Polymers
Authors:
Yvonne J. Hofstetter,
Yana Vaynzof
Abstract:
X-ray photoemission spectroscopy (XPS) depth profiling using monoatomic Ar+ ion etching sources is a common technique that allows for the probing of the vertical compositional profiles of a wide range of materials. In polymer-based organic photovoltaic devices, it is commonly used to study compositional variations across the interfaces of the organic active layer with charge extraction layers or e…
▽ More
X-ray photoemission spectroscopy (XPS) depth profiling using monoatomic Ar+ ion etching sources is a common technique that allows for the probing of the vertical compositional profiles of a wide range of materials. In polymer-based organic photovoltaic devices, it is commonly used to study compositional variations across the interfaces of the organic active layer with charge extraction layers or electrodes, as well as the vertical phase separation within the bulk-heterojunction active layer. It is generally considered that the damage induced by the etching of organic layers is limited to the very top surface, such that the XPS signal (acquired from the top ~10 nm of the layer) remains largely unaffected, allowing for a reliable measurement of the sample composition throughout the depth profile. Herein, we investigate a range of conjugated polymers and quantify the depth of the damage induced by monoatomic etching for Ar+ ion energies ranging from 0.5 keV to 4 keV using argon gas cluster ion beam depth profiling. The results demonstrate that even when etching with the lowest available monoatomic ion energy for as little as 3 s, the damaged polymer material extends deeper into the bulk than the XPS probing depth. We show that the damaged material distorts the compositional information obtained by XPS, resulting in erroneous depth profiles. Furthermore, we propose that only gas cluster ion beam etching sources should be used for depth profiling of organic conjugated polymers, as those induce significantly less damage and maintain the compositional information throughout the entire profile.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.