Showing 1–9 of 9 results for author: Voyles, A S

Measurement of Proton-Induced Reactions on Lanthanum from 55--200 MeV by Stacked-Foil Activation

Authors: Jonathan T. Morrell, Ellen M. O'Brien, Michael Skulski, Andrew S. Voyles, Dmitri G. Medvedev, Veronika Mocko, Lee A. Bernstein, C. Etienne Vermeulen

Abstract: Cerium-134 is an isotope desired for applications as a chemical analogue to the promising therapeutic radionuclide $^{225}$Ac, for use in bio-distribution assays as an in vivo generator of the short-lived positron-emitting isotope $^{134}$La. In the 50-100 MeV energy range relevant to the production of $^{134}$Ce by means of high-energy proton bombardment of lanthanum, existing cross section data… ▽ More Cerium-134 is an isotope desired for applications as a chemical analogue to the promising therapeutic radionuclide $^{225}$Ac, for use in bio-distribution assays as an in vivo generator of the short-lived positron-emitting isotope $^{134}$La. In the 50-100 MeV energy range relevant to the production of $^{134}$Ce by means of high-energy proton bombardment of lanthanum, existing cross section data are discrepant and have gaps at important energies. To address these deficiencies, a series of 17 $^{139}$La foils (99.919% natural abundance) were irradiated in two stacked-target experiments: one at the LANL's Isotope Production Facility with an incident proton energy of 100 MeV, and a second at BNL's Brookhaven Linac Isotope Producer with an incident proton energy of 200 MeV - a complete energy range spanning approximately 55-200 MeV. Cross sections are reported for 30 products of $^{139}$La(p,x) reactions (representing up to 55% of the total non-elastic cross section), in addition to 24 residual products measured in the $^{nat}$Cu and $^{nat}$Ti foils that were used as proton flux monitors. The measured production cross sections for $^{139}$La reactions were compared to literature data as well as default calculations from the nuclear reaction modeling codes TALYS, EMPIRE and ALICE, as well as the TENDL-2023 library. The default calculations typically exhibited poor predictive capability, due to the complexity of multiple interacting physics models in this energy range, and deficiencies in preequilibrium reaction modeling. Building upon previous efforts to evaluate proton-induced reactions in this energy range, a parameter adjustment procedure was performed upon the optical model and the two-component exciton model using the TALYS-2.0 code. This resulted in an improvement in $^{139}$La(p,x) cross sections for applications including isotope production, over default predictions. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Secondary Neutron Production from Thick Target Deuteron Breakup

Authors: Jonathan T. Morrell, Andrew S. Voyles, Jon C. Batchelder, Joshua A. Brown, Lee A. Bernstein

Abstract: Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and data on neutron yields from thick target breakup remains relatively scarce. In this work, the double-differential neutron yields from deuteron breakup have bee… ▽ More Thick target deuteron breakup is a variable-energy accelerator-based source of high-energy neutrons, with applications in fundamental and applied nuclear science and engineering. However, the breakup mechanism remains poorly understood, and data on neutron yields from thick target breakup remains relatively scarce. In this work, the double-differential neutron yields from deuteron breakup have been measured on a thick beryllium target at $ε_d=33$ and 40 MeV, using both time-of-flight and activation techniques. We have also introduced a simple hybrid model for the double-differential deuteron breakup cross section, applicable in the $ε_d=10$--$100$ MeV energy range on light ($Z\leq 6$) targets. This model features four empirical parameters that have been fit to reproduce experimental breakup measurements on beryllium targets, using the method of least-squares. It was shown that these parameters extrapolate well to higher energies, and to other low-Z target materials. We also include optimization of the parameters that modify the Kalbach systematics for compound and pre-equilibrium reactions, in order to better reproduce the experimental data for beryllium targets at large angles. △ Less

Submitted 30 November, 2022; originally announced December 2022.

Preparation and Characterization of Thin Arsenic Targets for Stacked-Target Experiments

Authors: Andrew S. Voyles, Morgan B. Fox, Jonathan T. Morrell, Michael P. Zach, Evan K. Still, Lee A. Bernstein, Wesley D. Frey, Burton J. Mehciz

Abstract: Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed and capable of arsenic deposits ranging in mass from approximately 1$\unicode{x2013}$29 mg (0.32$\unicode{x2013}$7.2 mg/cm$^2$, 0.57$\unicode{x2013}$13 $μ$m).… ▽ More Thin, uniform arsenic targets suitable for high-fidelity cross section measurements in stacked-target experiments were prepared by electrodeposition of arsenic on titanium backings from aqueous solutions. Electrolytic cells were constructed and capable of arsenic deposits ranging in mass from approximately 1$\unicode{x2013}$29 mg (0.32$\unicode{x2013}$7.2 mg/cm$^2$, 0.57$\unicode{x2013}$13 $μ$m). Examination of electrodeposit surface morphology by scanning electron microscopy and microanalysis was performed to investigate the uniformity of produced targets. Brief studies of plating growth dynamics and structural properties through cyclic voltammetry were also undertaken. Alternative target fabrication approaches by vapor deposition and electrodeposition from a deep eutectic solvent were additionally conducted. We further introduce a non-destructive characterization method for thin targets by neutron activation, which is independent of neutron flux shape, environmental factors, and source geometry, while correcting for any potential scatter or absorption effects. △ Less

Submitted 15 February, 2024; v1 submitted 10 June, 2021; originally announced June 2021.

Comments: 15 pages (+4 for references/acknowledgments), 11 figures, preprint prepared for NIM-B

Measurement and Modeling of Proton-Induced Reactions on Arsenic from 35 to 200 MeV

Authors: Morgan B. Fox, Andrew S. Voyles, Jonathan T. Morrell, Lee A. Bernstein, Jon C. Batchelder, Eva R. Birnbaum, Cathy S. Cutler, Arjan J. Koning, Amanda M. Lewis, Dmitri G. Medvedev, Francois M. Nortier, Ellen M. O'Brien, Christiaan Vermeulen

Abstract: $^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}… ▽ More $^{72}$As is a promising positron emitter for diagnostic imaging that can be employed locally using a $^{72}$Se generator. However, current reaction pathways to $^{72}$Se have insufficient nuclear data for efficient production using regional 100-200 MeV high-intensity proton accelerators. In order to address this deficiency, stacked-target irradiations were performed at LBNL, LANL, and BNL to measure the production of the $^{72}$Se/$^{72}$As PET generator system via $^{75}$As(p,x) between 35 and 200 MeV. This work provides the most well-characterized excitation function for $^{75}$As(p,4n)$^{72}$Se starting from threshold. Additional focus was given to report the first measurements of $^{75}$As(p,x)$^{68}$Ge and bolster an already robust production capability for the highly valuable $^{68}$Ge/$^{68}$Ga PET generator. Thick target yield comparisons with prior established formation routes to both generators are made. In total, high-energy proton-induced cross sections are reported for 55 measured residual products from $^{75}$As, Cu, and Ti targets, where the latter two materials were present as monitor foils. These results were compared with literature data as well as the default theoretical calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. Reaction modeling at these energies is typically unsatisfactory due to few prior published data and many interacting physics models. Therefore, a detailed assessment of the TALYS code was performed with simultaneous parameter adjustments applied according to a standardized procedure. Particular attention was paid to the formulation of the two-component exciton model in the transition between the compound and pre-equilibrium regions, with a linked investigation of level density models for nuclei off of stability and their impact on modeling predictive power. △ Less

Submitted 11 June, 2021; v1 submitted 8 June, 2021; originally announced June 2021.

Comments: 35 pages (+5 for references), 69 figures, preprint prepared for Physical Review Journals, minor revisions for references to recently published work

Investigating High-Energy Proton-Induced Reactions on Spherical Nuclei: Implications for the Pre-Equilibrium Exciton Model

Authors: Morgan B. Fox, Andrew S. Voyles, Jonathan T. Morrell, Lee A. Bernstein, Amanda M. Lewis, Arjan J. Koning, Jon C. Batchelder, Eva R. Birnbaum, Cathy S. Cutler, Dmitri G. Medvedev, Francois M. Nortier, Ellen M. O'Brien, Christiaan Vermeulen

Abstract: A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction m… ▽ More A number of accelerator-based isotope production facilities utilize 100- to 200-MeV proton beams due to the high production rates enabled by high-intensity beam capabilities and the greater diversity of isotope production brought on by the long range of high-energy protons. However, nuclear reaction modeling at these energies can be challenging because of the interplay between different reaction modes and a lack of existing guiding cross section data. A Tri-lab collaboration has been formed among the Lawrence Berkeley, Los Alamos, and Brookhaven National Laboratories to address these complexities by characterizing charged-particle nuclear reactions relevant to the production of established and novel radioisotopes. In the inaugural collaboration experiments, stacked-targets of niobium foils were irradiated at the Brookhaven Linac Isotope Producer (E$_p$=200 MeV) and the Los Alamos Isotope Production Facility (E$_p$=100 MeV) to measure $^{93}$Nb(p,x) cross sections between 50 and 200 MeV. The measured cross-section results were compared with literature data as well as the default calculations of the nuclear model codes TALYS, CoH, EMPIRE, and ALICE. We developed a standardized procedure that determines the reaction model parameters that best reproduce the most prominent reaction channels in a physically justifiable manner. The primary focus of the procedure was to determine the best parametrization for the pre-equilibrium two-component exciton model. This modeling study revealed a trend toward a relative decrease for internal transition rates at intermediate proton energies (E$_p$=20-60 MeV) in the current exciton model as compared to the default values. The results of this work are instrumental for the planning, execution, and analysis essential to isotope production. △ Less

Submitted 5 April, 2021; v1 submitted 24 October, 2020; originally announced October 2020.

Comments: 37 pages, 62 figures. Revised version, published in Physical Review C

Journal ref: Phys. Rev. C, vol. 103, no. 3, p. 034601, 2021

Proton-induced reactions on Fe, Cu, & Ti from threshold to 55 MeV

Authors: Andrew S. Voyles, Amanda M. Lewis, Jonathan T. Morrell, M. Shamsuzzoha Basunia, Lee A. Bernstein, Jonathan W. Engle, Stephen A. Graves, Eric F. Matthews

Abstract: Theoretical models often differ significantly from measured data in their predictions of the magnitude of nuclear reactions that produce radionuclides for medical, research, and national security applications. In this paper, we compare a priori predictions from several state-of-the-art reaction modeling packages (CoH, EMPIRE, TALYS, and ALICE) to cross sections measured using the stacked-target ac… ▽ More Theoretical models often differ significantly from measured data in their predictions of the magnitude of nuclear reactions that produce radionuclides for medical, research, and national security applications. In this paper, we compare a priori predictions from several state-of-the-art reaction modeling packages (CoH, EMPIRE, TALYS, and ALICE) to cross sections measured using the stacked-target activation method. The experiment was performed using the LBNL 88-Inch Cyclotron with beams of 25 and 55 MeV protons on a stack of iron, copper, and titanium foils. 34 excitation functions were measured for 4 < Ep < 55 MeV, including the first measurement of the independent cross sections for natFe(p,x) 49,51Cr, 51,52m,52g,56Mn, and 58m,58gCo. All of the models failed to reproduce the isomer-to-ground state ratio for reaction channels at compound and pre-compound energies, suggesting issues in modeling the deposition or distribution of angular momentum in these residual nuclei. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: Submitted to Phys Rev C, 25 pages, 41 figures. arXiv admin note: text overlap with arXiv:1804.06548

Measurement of $^{139}$La(p,x) Cross Sections from 35-60 MeV by Stacked-Target Activation

Authors: Jonathan T. Morrell, Andrew S. Voyles, M. S. Basunia, Jon C. Batchelder, Eric F. Matthews, Lee A. Bernstein

Abstract: A stacked-target of natural lanthanum foils (99.9119% $^{139}$La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. $^{139}$La(p,x) cross sections are reported between 35-60 MeV for nine radionuclides. The primary motivation for this measurement was the need to quantify the production of $^{134}$Ce. As a positron-emitting analogue of the promising medical radionuclide… ▽ More A stacked-target of natural lanthanum foils (99.9119% $^{139}$La) was irradiated using a 60 MeV proton beam at the LBNL 88-Inch Cyclotron. $^{139}$La(p,x) cross sections are reported between 35-60 MeV for nine radionuclides. The primary motivation for this measurement was the need to quantify the production of $^{134}$Ce. As a positron-emitting analogue of the promising medical radionuclide $^{225}$Ac, $^{134}$Ce is desirable for in vivo applications of bio-distribution assays for this emerging radio-pharmaceutical. The results of this measurement were compared to the nuclear model codes TALYS, EMPIRE and ALICE (using default parameters), which showed significant deviation from the measured values. △ Less

Submitted 1 August, 2019; v1 submitted 9 July, 2019; originally announced July 2019.

Excitation functions for (p,x) reactions of niobium in the energy range of E$_{\text{p}}$ = 40-90 MeV

Authors: Andrew S. Voyles, Lee A. Bernstein, Eva R. Birnbaum, Jonathan W. Engle, Stephen A. Graves, Toshihiko Kawano, Amanda M. Lewis, Francois M. Nortier

Abstract: A stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory's Isotope Production Facility, to investigate the $^{93}$Nb(p,4n)$^{90}$Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) rea… ▽ More A stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory's Isotope Production Facility, to investigate the $^{93}$Nb(p,4n)$^{90}$Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) reactions between 40-90 MeV, as well as 5 independent measurements of isomer branching ratios, are reported. These are useful in medical and basic science radionuclide productions at intermediate energies. The $^{\text{nat}}$Cu(p,x)$^{56}$Co, $^{\text{nat}}$Cu(p,x)$^{62}$Zn, and $^{\text{nat}}$Cu(p,x)$^{65}$Zn reactions were used to determine proton fluence, and all activities were quantified using HPGe spectrometry. Variance minimization techniques were employed to reduce systematic uncertainties in proton energy and fluence, improving the reliability of these measurements. The measured cross sections are shown to be in excellent agreement with literature values, and have been measured with improved precision compared with previous measurements. This work also reports the first measurement of the $^{\text{nat}}$Nb(p,x)$^{82\text{m}}$Rb reaction, and of the independent cross sections for $^{\text{nat}}$Cu(p,x)$^{52\text{g}}$Mn and $^{\text{nat}}$Nb(p,x)$^{85\text{g}}$Y in the 40-90 MeV region. The effects of $^{\text{nat}}$Si(p,x)$^{22,24}$Na contamination, arising from silicone adhesive in the Kapton tape used to encapsulate the aluminum monitor foils, is also discussed as a cautionary note to future stacked-target cross section measurements. \emph{A priori} predictions of the reaction modeling codes CoH, EMPIRE, and TALYS are compared with experimentally measured values and used to explore the differences between codes for the $^{\text{nat}}$Nb(p,x) and $^{\text{nat}}$Cu(p,x) reactions. △ Less

Submitted 21 June, 2018; v1 submitted 18 April, 2018; originally announced April 2018.

Comments: 34 pages, submitted to NIM-B

Report number: LA-UR-18-22980

Journal ref: Nuclear Instruments and Methods in Physics Research B, 429 (2018) 53-74

Design, construction, and characterization of a compact DD neutron generator designed for 40Ar/39Ar geochronology

Authors: Mauricio Ayllon, Parker A. Adams, Joseph D. Bauer, Jon C. Batchelder, Tim A. Becker, Lee A. Bernstein, Su-Ann Chong, Jay James, Leo E. Kirsch, Ka-Ngo Leung, Eric F. Matthews, Jonathan T. Morrell, Paul R. Renne, Andrew M. Rogers, Daniel Rutte, Andrew S. Voyles, Karl Van Bibber, Cory S. Waltz

Abstract: A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near futu… ▽ More A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near future. In this work, we present an overview of the High Flux Neutron Generator (HFNG) which includes a variety of simulations, analytical models, and experimental validation of results. Extensive analysis was performed in order to characterize the neutron yield, flux, and energy distribution at specific locations where samples may be loaded for irradiation. A notable design feature of the HFNG is the possibility for sample irradiation internal to the cathode, just 8 mm away from the neutron production site, thus maximizing the neutron flux (n/cm2/s). The generator's maximum neutron flux at this irradiation position is 2.58e7 n/cm2/s +/- 5% (approximately 3e8 n/s total yield) as measured via activation of small natural indium foils. However, future development is aimed at achieving an order of magnitude increase in flux. Additionally, the deuterium ion beam optics were optimized by simulations for various extraction configurations in order to achieve a uniform neutron flux distribution and an acceptable heat load. Finally, experiments were performed in order to benchmark the modeling and characterization of the HFNG. △ Less

Submitted 9 April, 2018; v1 submitted 9 March, 2018; originally announced March 2018.

Comments: 31 pages, 20 figures