-
Abatement of Ionizing Radiation for Superconducting Quantum Devices
Authors:
B. Loer,
P. M. Harrington,
B. Archambault,
E. Fuller,
B. Pierson,
I. Arnquist,
K. Harouaka,
T. D. Schlieder,
D. K. Kim,
A. J. Melville,
B. M. Niedzielski,
J. K. Yoder,
K. Serniak,
W. D. Oliver,
J. L. Orrell,
R. Bunker,
B. A. VanDevender,
M. Warner
Abstract:
Ionizing radiation has been shown to reduce the performance of superconducting quantum circuits. In this report, we evaluate the expected contributions of different sources of ambient radioactivity for typical superconducting qubit experiment platforms. Our assessment of radioactivity inside a typical cryostat highlights the importance of selecting appropriate materials for the experiment componen…
▽ More
Ionizing radiation has been shown to reduce the performance of superconducting quantum circuits. In this report, we evaluate the expected contributions of different sources of ambient radioactivity for typical superconducting qubit experiment platforms. Our assessment of radioactivity inside a typical cryostat highlights the importance of selecting appropriate materials for the experiment components nearest to qubit devices, such as packaging and electrical interconnects. We present a shallow underground facility (30-meter water equivalent) to reduce the flux of cosmic rays and a lead shielded cryostat to abate the naturally occurring radiogenic gamma-ray flux in the laboratory environment. We predict that superconducting qubit devices operated in this facility could experience a reduced rate of correlated multi-qubit errors by a factor of approximately 20 relative to the rate in a typical above-ground, unshielded facility. Finally, we outline overall design improvements that would be required to further reduce the residual ionizing radiation rate, down to the limit of current generation direct detection dark matter experiments.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
A Critical Reflection on the Use of Toxicity Detection Algorithms in Proactive Content Moderation Systems
Authors:
Mark Warner,
Angelika Strohmayer,
Matthew Higgs,
Lynne Coventry
Abstract:
Toxicity detection algorithms, originally designed with reactive content moderation in mind, are increasingly being deployed into proactive end-user interventions to moderate content. Through a socio-technical lens and focusing on contexts in which they are applied, we explore the use of these algorithms in proactive moderation systems. Placing a toxicity detection algorithm in an imagined virtual…
▽ More
Toxicity detection algorithms, originally designed with reactive content moderation in mind, are increasingly being deployed into proactive end-user interventions to moderate content. Through a socio-technical lens and focusing on contexts in which they are applied, we explore the use of these algorithms in proactive moderation systems. Placing a toxicity detection algorithm in an imagined virtual mobile keyboard, we critically explore how such algorithms could be used to proactively reduce the sending of toxic content. We present findings from design workshops conducted with four distinct stakeholder groups and find concerns around how contextual complexities may exasperate inequalities around content moderation processes. Whilst only specific user groups are likely to directly benefit from these interventions, we highlight the potential for other groups to misuse them to circumvent detection, validate and gamify hate, and manipulate algorithmic models to exasperate harm.
△ Less
Submitted 26 March, 2024; v1 submitted 19 January, 2024;
originally announced January 2024.
-
Key to Kindness: Reducing Toxicity In Online Discourse Through Proactive Content Moderation in a Mobile Keyboard
Authors:
Mark Warner,
Angelika Strohmayer,
Matthew Higgs,
Husnain Rafiq,
Liying Yang,
Lynne Coventry
Abstract:
Growing evidence shows that proactive content moderation supported by AI can help improve online discourse. However, we know little about designing these systems, how design impacts efficacy and user experience, and how people perceive proactive moderation across public and private platforms. We developed a mobile keyboard with built-in proactive content moderation which we tested (N=575) within a…
▽ More
Growing evidence shows that proactive content moderation supported by AI can help improve online discourse. However, we know little about designing these systems, how design impacts efficacy and user experience, and how people perceive proactive moderation across public and private platforms. We developed a mobile keyboard with built-in proactive content moderation which we tested (N=575) within a semi-functional simulation of a public and private communication platform. Where toxic content was detected, we used different interventions that embedded three design factors: timing, friction, and the presentation of the AI model output. We found moderation to be effective, regardless of the design. However, friction was a source of annoyance while prompts with no friction that occurred during typing were more effective. Follow-up interviews highlight the differences in how these systems are perceived across public and private platforms, and how they can offer more than moderation by acting as educational and communication support tools.
△ Less
Submitted 19 January, 2024;
originally announced January 2024.
-
A Dual-Species Atom Interferometer Payload for Operation on Sounding Rockets
Authors:
Michael Elsen,
Baptist Piest,
Fabian Adam,
Oliver Anton,
Paweł Arciszewski,
Wolfgang Bartosch,
Dennis Becker,
Jonas Böhm,
Sören Boles,
Klaus Döringshoff,
Priyanka Guggilam,
Ortwin Hellmig,
Isabell Imwalle,
Simon Kanthak,
Christian Kürbis,
Matthias Koch,
Maike Diana Lachmann,
Moritz Mihm,
Hauke Müntinga,
Ayush Mani Nepal,
Tim Oberschulte,
Peter Ohr,
Alexandros Papakonstantinou,
Arnau Prat,
Christian Reichelt
, et al. (14 additional authors not shown)
Abstract:
We report on the design and the construction of a sounding rocket payload capable of performing atom interferometry with Bose-Einstein condensates of $^{41}$K and $^{87}$Rb. The apparatus is designed to be launched in two consecutive missions with a VSB-30 sounding rocket and is qualified to withstand the expected vibrational loads of 1.8 g root-mean-square in a frequency range between 20 - 2000 H…
▽ More
We report on the design and the construction of a sounding rocket payload capable of performing atom interferometry with Bose-Einstein condensates of $^{41}$K and $^{87}$Rb. The apparatus is designed to be launched in two consecutive missions with a VSB-30 sounding rocket and is qualified to withstand the expected vibrational loads of 1.8 g root-mean-square in a frequency range between 20 - 2000 Hz and the expected static loads during ascent and re-entry of 25 g. We present a modular design of the scientific payload comprising a physics package, a laser system, an electronics system and a battery module. A dedicated on-board software provides a largely automated process of predefined experiments. To operate the payload safely in laboratory and flight mode, a thermal control system and ground support equipment has been implemented and will be presented. The payload presented here represents a cornerstone for future applications of matter wave interferometry with ultracold atoms on satellites.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
A Novel Alternating Joint Longitudinal Model for Post-ICU Hemoglobin Prediction
Authors:
Gabriel Demuth,
Curtis Storlie,
Matthew A. Warner,
Daryl J. Kor,
Phillip J. Shulte,
Andrew C. Hanson
Abstract:
Anemia is common in patients post-ICU discharge. However, which patients will develop or recover from anemia remains unclear. Prediction of anemia in this population is complicated by hospital readmissions, which can have substantial impacts on hemoglobin levels due to surgery, blood transfusions, or being a proxy for severe illness. We therefore introduce a novel Bayesian joint longitudinal model…
▽ More
Anemia is common in patients post-ICU discharge. However, which patients will develop or recover from anemia remains unclear. Prediction of anemia in this population is complicated by hospital readmissions, which can have substantial impacts on hemoglobin levels due to surgery, blood transfusions, or being a proxy for severe illness. We therefore introduce a novel Bayesian joint longitudinal model for hemoglobin over time, which includes specific parametric effects for hospital admission and discharge. These effects themselves depend on a patient's hemoglobin at time of hospitalization; therefore hemoglobin at a given time is a function of that patient's complete history of admissions and discharges up until that time. However, because the effects of an admission or discharge do not depend on themselves, the model remains well defined. We validate our model on a retrospective cohort of 6,876 patients from the Rochester Epidemiology Project using cross-validation, and find it accurately estimates hemoglobin and predicts anemic status and hospital readmission in the 30 days post-discharge with AUCs of .82 and .72, respectively.
△ Less
Submitted 17 February, 2023;
originally announced February 2023.
-
Discontinuous metric programming in liquid crystalline elastomers
Authors:
Tayler S. Hebner,
Riley G. A. Bowman,
Daniel Duffy,
Cyrus Mostajeran,
Itay Griniasty,
Itai Cohen,
Mark Warner,
Christopher N. Bowman,
Timothy J. White
Abstract:
Liquid crystalline elastomers (LCEs) are shape-changing materials that exhibit large deformations in response to applied stimuli. Local control of the orientation of LCEs spatially directs the deformation of these materials to realize spontaneous shape change in response to stimuli. Prior approaches to shape programming in LCEs utilize patterning techniques that involve the detailed inscription of…
▽ More
Liquid crystalline elastomers (LCEs) are shape-changing materials that exhibit large deformations in response to applied stimuli. Local control of the orientation of LCEs spatially directs the deformation of these materials to realize spontaneous shape change in response to stimuli. Prior approaches to shape programming in LCEs utilize patterning techniques that involve the detailed inscription of spatially varying nematic fields to produce sheets. These patterned sheets deform into elaborate geometries with complex Gaussian curvatures. Here, we present an alternative approach to realize shape-morphing in LCEs where spatial patterning of the crosslink density locally regulates the material deformation magnitude on either side of a prescribed interface curve. We also present a simple mathematical model describing the behavior of these materials. Further experiments coupled with the mathematical model demonstrate the control of the sign of Gaussian curvature, which is used in combination with heat transfer effects to design LCEs that self-clean as a result of temperature-dependent actuation properties.
△ Less
Submitted 26 December, 2022;
originally announced December 2022.
-
Optimizing Surveillance Satellites for the Synthetic Theater Operations Research Model
Authors:
Steven M. Warner,
Johannes O. Royset
Abstract:
The Synthetic Theater Operations Research Model (STORM) simulates theater-level conflict and requires inputs about utilization of surveillance satellites to search large geographical areas. We develop a mixed-integer linear optimization model that prescribes plans for how satellites and their sensors should be directed to best search an area of operations. It also specifies the resolution levels e…
▽ More
The Synthetic Theater Operations Research Model (STORM) simulates theater-level conflict and requires inputs about utilization of surveillance satellites to search large geographical areas. We develop a mixed-integer linear optimization model that prescribes plans for how satellites and their sensors should be directed to best search an area of operations. It also specifies the resolution levels employed by the sensors to ensure a suitable fidelity of the resulting images. We solve large-scale instances of the model involving up to 22 million variables and 11 million constraints in scenarios derived from STORM. On average, the model yields 55% improvement in search coverage relative to an existing heuristic algorithm in STORM.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Metric mechanics with non-trivial topology: actuating irises, cylinders and evertors
Authors:
D. Duffy,
M. Javed,
M. K. Abdelrahman,
T. H. Ware,
M. Warner,
J. S. Biggins
Abstract:
Liquid crystal elastomers contract along their director on heating and recover on cooling, offering great potential as actuators and artificial muscles. If a flat sheet is programmed with a spatially varying director pattern, it will actuate into a curved surface, allowing the material to act as a strong machine such as a grabber or lifter. Here we study the actuation of programmed annular sheets…
▽ More
Liquid crystal elastomers contract along their director on heating and recover on cooling, offering great potential as actuators and artificial muscles. If a flat sheet is programmed with a spatially varying director pattern, it will actuate into a curved surface, allowing the material to act as a strong machine such as a grabber or lifter. Here we study the actuation of programmed annular sheets which, owing to their central hole, can sidestep constraints on area and orientation. We systematically catalogue the set of developable surfaces encodable via axisymmetric director patterns, and uncover several qualitatively new modes of actuation, including cylinders, irises, and everted surfaces in which the inner boundary becomes the outer boundary after actuation. We confirm our designs with a combination of experiments and numerics. Many of our actuators can re-attain their initial inner or outer radius upon completing actuation, making them particularly promising, as they can avoid potentially problematic stresses in their activated state even when fixed onto a frame or pipe.
△ Less
Submitted 20 December, 2021; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Interfacial metric mechanics: stitching patterns of shape change in active sheets
Authors:
Fan Feng,
Daniel Duffy,
Mark Warner,
John S. Biggins
Abstract:
A flat sheet programmed with a planar pattern of spontaneous shape change will morph into a curved surface. Such metric mechanics is seen in growing biological sheets, and may be engineered in actuating soft matter sheets such as phase-changing liquid crystal elastomers (LCEs), swelling gels and inflating baromorphs. Here, we show how to combine multiple patterns in a sheet by stitching regions of…
▽ More
A flat sheet programmed with a planar pattern of spontaneous shape change will morph into a curved surface. Such metric mechanics is seen in growing biological sheets, and may be engineered in actuating soft matter sheets such as phase-changing liquid crystal elastomers (LCEs), swelling gels and inflating baromorphs. Here, we show how to combine multiple patterns in a sheet by stitching regions of different shape changes together piecewise along interfaces. This approach allows simple patterns to be used as building blocks, and enables the design of multi-material or active/passive sheets. We give a general condition for an interface to be geometrically compatible, and explore its consequences for LCE/LCE, gel/gel, and active/passive interfaces. In contraction/elongation systems such as LCEs, we find an infinite set of compatible interfaces between any pair of patterns along which the metric is discontinuous, and a finite number across which the metric is continuous. As an example, we find all possible interfaces between pairs of LCE logarithmic spiral patterns. In contrast, in isotropic systems such as swelling gels, only a finite number of continuous interfaces are available, greatly limiting the potential of stitching. In both continuous and discontinuous cases, we find the stitched interfaces generically carry singular Gaussian curvature, leading to intrinsically curved folds in the actuated surface. We give a general expression for the distribution of this curvature, and a more specialized form for interfaces in LCE patterns. The interfaces thus also have rich geometric and mechanical properties in their own right.
△ Less
Submitted 30 June, 2022; v1 submitted 9 February, 2021;
originally announced February 2021.
-
Shape programming lines of concentrated Gaussian curvature
Authors:
D. Duffy,
L. Cmok,
J. S. Biggins,
A. Krishna,
C. D. Modes,
M. K. Abdelrahman,
M. Javed,
T. H. Ware,
F. Feng,
M. Warner
Abstract:
Liquid crystal elastomers (LCEs) can undergo large reversible contractions along their nematic director upon heating or illumination. A spatially patterned director within a flat LCE sheet thus encodes a pattern of contraction on heating, which can morph the sheet into a curved shell, akin to how a pattern of growth sculpts a developing organism. Here we consider, theoretically, numerically and ex…
▽ More
Liquid crystal elastomers (LCEs) can undergo large reversible contractions along their nematic director upon heating or illumination. A spatially patterned director within a flat LCE sheet thus encodes a pattern of contraction on heating, which can morph the sheet into a curved shell, akin to how a pattern of growth sculpts a developing organism. Here we consider, theoretically, numerically and experimentally, patterns constructed from regions of radial and circular director, which, in isolation, would form cones and anticones. The resultant surfaces contain curved ridges with sharp V-shaped cross-sections, associated with the boundaries between regions in the patterns. Such ridges may be created in positively and negatively curved variants and, since they bear Gauss curvature (quantified here via the Gauss-Bonnet theorem), they cannot be flattened without energetically prohibitive stretch. Our experiments and numerics highlight that, although such ridges cannot be flattened isometrically, they can deform isometrically by trading the (singular) curvature of the V angle against the (finite) curvature of the ridge line. Furthermore, in finite thickness sheets, the sharp ridges are inevitably non-isometrically blunted to relieve bend, resulting in a modest smearing out of the encoded singular Gauss curvature. We close by discussing the use of such features as actuating linear features, such as probes, tongues and limbs, and highlighting the similarities between these patterns of shape change and those found during the morphogenesis of several biological systems.
△ Less
Submitted 30 June, 2021; v1 submitted 18 January, 2021;
originally announced January 2021.
-
Adaptive Step Size Incremental Conductance Based Maximum Power Point Tracking (MPPT)
Authors:
Eungkyun Kim,
Morgan Warner,
Indranil Bhattacharya
Abstract:
Extracting maximum power available from photovoltaic arrays requires the system operating at the maximum power point (MPP). Therefore, finding the MPP is necessary for efficient operation of PV arrays. The MPP changes with multiple environmental factors, mainly temperature and irradiance. Traditionally, the incremental conductance technique with fixed step size was used to find the MPP, which suff…
▽ More
Extracting maximum power available from photovoltaic arrays requires the system operating at the maximum power point (MPP). Therefore, finding the MPP is necessary for efficient operation of PV arrays. The MPP changes with multiple environmental factors, mainly temperature and irradiance. Traditionally, the incremental conductance technique with fixed step size was used to find the MPP, which suffers from a trade-off between speed of convergence and accuracy. In this work, we propose an incremental conductance maximum power point tracking (MPPT) algorithm with a variable step size, which adaptively changes the step size after each iteration based on how far away the current operating point is from a new MPP. This mitigates the aforementioned trade-off drastically by achieving faster convergence speed without the loss of accuracy. A series of simulations involving variations in temperature and irradiance were performed using MATLAB, and the speed of convergence and accuracy were compared with the traditional IC technique.
△ Less
Submitted 15 November, 2020;
originally announced November 2020.
-
Evolving, complex topography from combining centers of Gaussian curvature
Authors:
Fan Feng,
John S. Biggins,
Mark Warner
Abstract:
Liquid crystal elastomers and glasses can have significant shape change determined by their director patterns. Cones deformed from circular director patterns have non-trivial Gaussian curvature localised at tips, curved interfaces, and intersections of interfaces. We employ a generalised metric compatibility condition to characterize two families of interfaces between circular director patterns --…
▽ More
Liquid crystal elastomers and glasses can have significant shape change determined by their director patterns. Cones deformed from circular director patterns have non-trivial Gaussian curvature localised at tips, curved interfaces, and intersections of interfaces. We employ a generalised metric compatibility condition to characterize two families of interfaces between circular director patterns -- hyperbolic and elliptical interfaces, and find that the deformed interfaces are geometrically compatible. We focus on hyperbolic interfaces to design complex topographies and non-isometric origami, including n-fold intersections, symmetric and irregular tilings. The large design space of three-fold and four-fold tiling is utilized to quantitatively inverse design an array of pixels to display target images. Taken together, our findings provide comprehensive design principles for the design of actuators, displays, and soft robotics in liquid crystal elastomers and glasses.
△ Less
Submitted 30 June, 2021; v1 submitted 2 June, 2020;
originally announced June 2020.
-
Inflationary routes to Gaussian curved topography
Authors:
Emmanuel Siéfert,
Mark Warner
Abstract:
Gaussian-curved shapes are obtained by inflating initially flat systems made of two superimposed strong and light thermoplastic impregnated fabric sheets heat-sealed together along a specific network of lines. The resulting inflated structures are light and very strong because they (largely) resist deformation by the intercession of stretch. Programmed patterns of channels vary either discretely t…
▽ More
Gaussian-curved shapes are obtained by inflating initially flat systems made of two superimposed strong and light thermoplastic impregnated fabric sheets heat-sealed together along a specific network of lines. The resulting inflated structures are light and very strong because they (largely) resist deformation by the intercession of stretch. Programmed patterns of channels vary either discretely through boundaries, or continuously. The former give rise to facetted structures that are in effect non-isometric origami and which cannot unfold as in conventional folded structures, since they present localized angle deficit or surplus. Continuous variation of channel direction in the form of spirals is examined, giving rise to curved shells. We solve the inverse problem consisting in finding a network of seam lines leading to a target axisymmetric shape on inflation. They too have strength from the metric changes that have been pneumatically driven, resistance to change being met with stretch and hence high forces like typical shells .
△ Less
Submitted 12 March, 2020; v1 submitted 26 December, 2019;
originally announced December 2019.
-
The Bose-Einstein Condensate and Cold Atom Laboratory
Authors:
Kai Frye,
Sven Abend,
Wolfgang Bartosch,
Ahmad Bawamia,
Dennis Becker,
Holger Blume,
Claus Braxmaier,
Sheng-Wey Chiow,
Maxim A. Efremov,
Wolfgang Ertmer,
Peter Fierlinger,
Naceur Gaaloul,
Jens Grosse,
Christoph Grzeschik,
Ortwin Hellmig,
Victoria A. Henderson,
Waldemar Herr,
Ulf Israelsson,
James Kohel,
Markus Krutzik,
Christian Kürbis,
Claus Lämmerzahl,
Meike List,
Daniel Lüdtke,
Nathan Lundblad
, et al. (26 additional authors not shown)
Abstract:
Microgravity eases several constraints limiting experiments with ultracold and condensed atoms on ground. It enables extended times of flight without suspension and eliminates the gravitational sag for trapped atoms. These advantages motivated numerous initiatives to adapt and operate experimental setups on microgravity platforms. We describe the design of the payload, motivations for design choic…
▽ More
Microgravity eases several constraints limiting experiments with ultracold and condensed atoms on ground. It enables extended times of flight without suspension and eliminates the gravitational sag for trapped atoms. These advantages motivated numerous initiatives to adapt and operate experimental setups on microgravity platforms. We describe the design of the payload, motivations for design choices, and capabilities of the Bose-Einstein Condensate and Cold Atom Laboratory (BECCAL), a NASA-DLR collaboration. BECCAL builds on the heritage of previous devices operated in microgravity, features rubidium and potassium, multiple options for magnetic and optical trapping, different methods for coherent manipulation, and will offer new perspectives for experiments on quantum optics, atom optics, and atom interferometry in the unique microgravity environment on board the International Space Station.
△ Less
Submitted 10 December, 2019;
originally announced December 2019.
-
Geometry for evolving topographies of light-responsive plastic sheets
Authors:
Mark Warner
Abstract:
Recently, topography change by illumination of pre-stretched, flat sheets covered in ink of optical density varying in-plane has been demonstrated by Mailen\textit{ et al}, Smart Materials and Structures, 2019. They reduce an analysis of the problem to one of metric change in the sheets in the thin limit, that is, to a question of geometry. We present the explicit form of the contraction field nee…
▽ More
Recently, topography change by illumination of pre-stretched, flat sheets covered in ink of optical density varying in-plane has been demonstrated by Mailen\textit{ et al}, Smart Materials and Structures, 2019. They reduce an analysis of the problem to one of metric change in the sheets in the thin limit, that is, to a question of geometry. We present the explicit form of the contraction field needed to produce the bowls these authors were interested in, using a method that can also yield the contraction field for more general desired, circularly-symmetric topography development. We give as examples the fields required for developing paraboloids and catenoids.
△ Less
Submitted 27 March, 2019;
originally announced March 2019.
-
The KELT Follow-Up Network and Transit False Positive Catalog: Pre-vetted False Positives for TESS
Authors:
Karen A. Collins,
Kevin I. Collins,
Joshua Pepper,
Jonathan Labadie-Bartz,
Keivan Stassun,
B. Scott Gaudi,
Daniel Bayliss,
Joao Bento,
Knicole D. Colón,
Dax Feliz,
David James,
Marshall C. Johnson,
Rudolf B. Kuhn,
Michael B. Lund,
Matthew T. Penny,
Joseph E. Rodriguez,
Robert J. Siverd,
Daniel J. Stevens,
Xinyu Yao,
George Zhou,
Mundra Akshay,
Giulio F. Aldi,
Cliff Ashcraft,
Supachai Awiphan,
Özgür Baştürk
, et al. (86 additional authors not shown)
Abstract:
The Kilodegree Extremely Little Telescope (KELT) project has been conducting a photometric survey for transiting planets orbiting bright stars for over ten years. The KELT images have a pixel scale of ~23"/pixel---very similar to that of NASA's Transiting Exoplanet Survey Satellite (TESS)---as well as a large point spread function, and the KELT reduction pipeline uses a weighted photometric apertu…
▽ More
The Kilodegree Extremely Little Telescope (KELT) project has been conducting a photometric survey for transiting planets orbiting bright stars for over ten years. The KELT images have a pixel scale of ~23"/pixel---very similar to that of NASA's Transiting Exoplanet Survey Satellite (TESS)---as well as a large point spread function, and the KELT reduction pipeline uses a weighted photometric aperture with radius 3'. At this angular scale, multiple stars are typically blended in the photometric apertures. In order to identify false positives and confirm transiting exoplanets, we have assembled a follow-up network (KELT-FUN) to conduct imaging with higher spatial resolution, cadence, and photometric precision than the KELT telescopes, as well as spectroscopic observations of the candidate host stars. The KELT-FUN team has followed-up over 1,600 planet candidates since 2011, resulting in more than 20 planet discoveries. Excluding ~450 false alarms of non-astrophysical origin (i.e., instrumental noise or systematics), we present an all-sky catalog of the 1,128 bright stars (6<V<10) that show transit-like features in the KELT light curves, but which were subsequently determined to be astrophysical false positives (FPs) after photometric and/or spectroscopic follow-up observations. The KELT-FUN team continues to pursue KELT and other planet candidates and will eventually follow up certain classes of TESS candidates. The KELT FP catalog will help minimize the duplication of follow-up observations by current and future transit surveys such as TESS.
△ Less
Submitted 19 September, 2018; v1 submitted 5 March, 2018;
originally announced March 2018.
-
Nematic director fields and topographies of shells of revolution
Authors:
Mark Warner,
Cyrus Mostajeran
Abstract:
We solve the forward and inverse problems associated with the transformation of flat sheets to surfaces of revolution with non-trivial topography, including Gaussian curvature, without a stretch elastic cost. We deal with systems slender enough to have a small bend energy cost. Shape change is induced by light or heat causing contraction along a non-uniform director field in the plane of an initia…
▽ More
We solve the forward and inverse problems associated with the transformation of flat sheets to surfaces of revolution with non-trivial topography, including Gaussian curvature, without a stretch elastic cost. We deal with systems slender enough to have a small bend energy cost. Shape change is induced by light or heat causing contraction along a non-uniform director field in the plane of an initially flat nematic sheet. The forward problem is, given a director distribution, what shape is induced? Along the way, we determine the Gaussian curvature and the evolution with induced mechanical deformation of the director field and of material curves in the surface (proto-radii) that will become radii in the final surface. The inverse problem is, given a target shape, what director field does one need to specify? Analytic examples of director fields are fully calculated that will, for specific deformations, yield catenoids and paraboloids of revolution. The general prescription is given in terms of an integral equation.
△ Less
Submitted 29 January, 2018; v1 submitted 7 December, 2017;
originally announced December 2017.
-
Curvature by design and on demand in liquid crystal elastomers
Authors:
Benjamin A. Kowalski,
Cyrus Mostajeran,
Nicholas P. Godman,
Mark Warner,
Timothy J. White
Abstract:
The shape of liquid crystalline elastomers (LCEs) with spatial variation in the director orientation can be transformed by exposure to a stimulus. Here, informed by previously reported analytical treatments, we prepare complex spiral patterns imprinted into LCEs and quantify the resulting shape transformation. Quantification of the stimuli-induced shapes reveals good agreement between predicted an…
▽ More
The shape of liquid crystalline elastomers (LCEs) with spatial variation in the director orientation can be transformed by exposure to a stimulus. Here, informed by previously reported analytical treatments, we prepare complex spiral patterns imprinted into LCEs and quantify the resulting shape transformation. Quantification of the stimuli-induced shapes reveals good agreement between predicted and experimentally observed curvatures. We conclude this communication by reporting a design strategy to allow LCE films to be anchored at their external boundaries onto rigid substrates without incurring internal, mechanical-mismatch stresses upon actuation, a critical advance to the realization of shape transformation of LCEs in practical device applications.
△ Less
Submitted 22 November, 2017;
originally announced November 2017.
-
Deep optical penetration dynamics in photo-bending
Authors:
Daniel Corbett,
Chen Xuan,
Mark Warner
Abstract:
We model both the photo-stationary state and dynamics of an illuminated, photo-sensitive, glassy liquid crystalline sheet. To illustrate the interplay between local tilt $θ$ of the sheet, effective incident intensity, curvature and dynamics, we adopt the simplest variation of local incident light intensity with angle, that is $\cosθ$. The tilt in the stationary state never overshoots the vertical,…
▽ More
We model both the photo-stationary state and dynamics of an illuminated, photo-sensitive, glassy liquid crystalline sheet. To illustrate the interplay between local tilt $θ$ of the sheet, effective incident intensity, curvature and dynamics, we adopt the simplest variation of local incident light intensity with angle, that is $\cosθ$. The tilt in the stationary state never overshoots the vertical, but maximum curvature could be seen in the middle of the sheet for intense light. In dynamics, overshoot and self-eclipsing arise, revealing how important moving fronts of light penetration are. Eclipsing is qualitatively as in the experiments of Ikeda and Yu (2003).
△ Less
Submitted 6 July, 2015; v1 submitted 6 July, 2015;
originally announced July 2015.
-
Negative Gaussian curvature from induced metric changes
Authors:
Carl D. Modes,
Mark Warner
Abstract:
We revisit the light or heat-induced changes in topography of initially flat sheets of solid that elongate or contract along patterned, in-plane director fields. For radial or azimuthal directors, negative Gaussian curvature is generated -- so-called "anti-cones". We show that azimuthal material displacements are required for the distorted state to be stretch-free and bend-minimising. The resultan…
▽ More
We revisit the light or heat-induced changes in topography of initially flat sheets of solid that elongate or contract along patterned, in-plane director fields. For radial or azimuthal directors, negative Gaussian curvature is generated -- so-called "anti-cones". We show that azimuthal material displacements are required for the distorted state to be stretch-free and bend-minimising. The resultant shapes are smooth and aster-like and can become re-entrant in the azimuthal coordinate for large deformations. We show that care is needed when considering elastomers rather than glasses, though the former offer huge deformations.
△ Less
Submitted 22 June, 2015; v1 submitted 19 February, 2015;
originally announced February 2015.
-
Of Matters Condensed
Authors:
Michael Shulman,
Marc Warner
Abstract:
The American Physical Society (APS) March Meeting of condensed matter physics has grown to nearly 10,000 participants, comprises 23 individual APS groups, and even warrants its own hashtag (#apsmarch). Here we analyze the text and data from March Meeting abstracts of the past nine years and discuss trends in condensed matter physics over this time period. We find that in comparison to atomic, mole…
▽ More
The American Physical Society (APS) March Meeting of condensed matter physics has grown to nearly 10,000 participants, comprises 23 individual APS groups, and even warrants its own hashtag (#apsmarch). Here we analyze the text and data from March Meeting abstracts of the past nine years and discuss trends in condensed matter physics over this time period. We find that in comparison to atomic, molecular, and optical physics, condensed matter changes rapidly, and that condensed matter appears to be moving increasingly toward subject matter that is traditionally in materials science and engineering.
△ Less
Submitted 10 February, 2015;
originally announced February 2015.
-
Real-time earthquake warning for astronomical observatories
Authors:
Michael Coughlin,
Christopher Stubbs,
Sergio Barrientos,
Chuck Claver,
Jan Harms,
Christopher Smith,
Michael Warner
Abstract:
Early earthquake warning is a rapidly developing capability that has significant ramifications for many fields, including astronomical observatories. In this work, we describe the susceptibility of astronomical facilities to seismic events, including large telescopes as well as second-generation ground-based gravitational-wave interferometers. We describe the potential warning times for observator…
▽ More
Early earthquake warning is a rapidly developing capability that has significant ramifications for many fields, including astronomical observatories. In this work, we describe the susceptibility of astronomical facilities to seismic events, including large telescopes as well as second-generation ground-based gravitational-wave interferometers. We describe the potential warning times for observatories from current seismic networks and propose locations for future seismometers to maximize warning times.
△ Less
Submitted 11 December, 2014;
originally announced December 2014.
-
Optomechanical conversion by mechanical turbines
Authors:
Milos Knezevic,
Mark Warner
Abstract:
Liquid crystal elastomers are rubbers with liquid crystal order. They contract along their nematic director when heated or illuminated. The shape changes are large and occur in a relatively narrow temperature interval, or at low illumination, around the nematic-isotropic transition. We present a conceptual design of a mechanical, turbine-based engine using photo-active liquid crystal elastomers to…
▽ More
Liquid crystal elastomers are rubbers with liquid crystal order. They contract along their nematic director when heated or illuminated. The shape changes are large and occur in a relatively narrow temperature interval, or at low illumination, around the nematic-isotropic transition. We present a conceptual design of a mechanical, turbine-based engine using photo-active liquid crystal elastomers to extract mechanical work from light. Its efficiency is estimated to be 40%.
△ Less
Submitted 2 November, 2014; v1 submitted 19 June, 2014;
originally announced June 2014.
-
Sub-nanometer resolution in three-dimensional magnetic-resonance imaging of individual dark spins
Authors:
M. S. Grinolds,
M. Warner,
K. De Greve,
Y. Dovzhenko,
L. Thiel,
R. L. Walsworth,
S. Hong,
P. Maletinsky,
A. Yacoby
Abstract:
Magnetic resonance imaging (MRI) has revolutionized biomedical science by providing non-invasive, three-dimensional biological imaging. However, spatial resolution in conventional MRI systems is limited to tens of microns, which is insufficient for imaging on molecular and atomic scales. Here we demonstrate an MRI technique that provides sub-nanometer spatial resolution in three dimensions, with s…
▽ More
Magnetic resonance imaging (MRI) has revolutionized biomedical science by providing non-invasive, three-dimensional biological imaging. However, spatial resolution in conventional MRI systems is limited to tens of microns, which is insufficient for imaging on molecular and atomic scales. Here we demonstrate an MRI technique that provides sub-nanometer spatial resolution in three dimensions, with single electron-spin sensitivity. Our imaging method works under ambient conditions and can measure ubiquitous 'dark' spins, which constitute nearly all spin targets of interest and cannot otherwise be individually detected. In this technique, the magnetic quantum-projection noise of dark spins is measured using a single nitrogen-vacancy (NV) magnetometer located near the surface of a diamond chip. The spatial distribution of spins surrounding the NV magnetometer is imaged with a scanning magnetic-field gradient. To evaluate the performance of the NV-MRI technique, we image the three-dimensional landscape of dark electronic spins at and just below the diamond surface and achieve an unprecedented combination of resolution (0.8 nm laterally and 1.5 nm vertically) and single-spin sensitivity. Our measurements uncover previously unidentified electronic spins on the diamond surface, which can potentially be used as resources for improved magnetic imaging of samples proximal to the NV-diamond sensor. This three-dimensional NV-MRI technique is immediately applicable to diverse systems including imaging spin chains, readout of individual spin-based quantum bits, and determining the precise location of spin labels in biological systems.
△ Less
Submitted 14 January, 2014; v1 submitted 12 January, 2014;
originally announced January 2014.
-
Optomechanical elastomeric engine
Authors:
Milos Knezevic,
Mark Warner
Abstract:
Nematic elastomers contract along their director when heated or illuminated (in the case of photoelastomers). We present a conceptual design for an elastomer-based engine to extract mechanical work from heat or light. The material parameters and the geometry of such an engine are explored, and it is shown that its efficiency can go up to 20%.
Nematic elastomers contract along their director when heated or illuminated (in the case of photoelastomers). We present a conceptual design for an elastomer-based engine to extract mechanical work from heat or light. The material parameters and the geometry of such an engine are explored, and it is shown that its efficiency can go up to 20%.
△ Less
Submitted 17 October, 2013;
originally announced October 2013.
-
Understanding the Chain Fountain
Authors:
John Simeon Biggins,
Mark Warner
Abstract:
If a chain is initially at rest in a beaker at a height h1 above the ground, and the end of the chain is pulled over the rim of the beaker and down towards the ground and then released, the chain will spontaneously "flow" out of the beaker under gravity. Furthermore, the beads do not simply drag over the edge of the beaker but form a fountain reaching a height h2 above it. We show that the formati…
▽ More
If a chain is initially at rest in a beaker at a height h1 above the ground, and the end of the chain is pulled over the rim of the beaker and down towards the ground and then released, the chain will spontaneously "flow" out of the beaker under gravity. Furthermore, the beads do not simply drag over the edge of the beaker but form a fountain reaching a height h2 above it. We show that the formation of a fountain requires that the beads come into motion not only by being pulled upwards by the part of the chain immediately above the pile, but also by being pushed upwards by an anomalous reaction force from the pile of stationary chain. We propose possible origins for this force, argue that its magnitude will be proportional to the square of the chain velocity, and predict and verify experimentally that h2 is proportional to h1.
△ Less
Submitted 22 November, 2013; v1 submitted 15 October, 2013;
originally announced October 2013.
-
Photodynamics of stress in clamped nematic elastomers
Authors:
Milos Knezevic,
Mark Warner,
Martin Copic,
Antoni Sanchez-Ferrer
Abstract:
We describe the complex time-dependence of the build up of force exerted by a clamped photo-elastomer under illumination. Nonlinear (non-Beer) absorption leads to a bleaching wave of a significant cis isomer dye concentration deeply penetrating the solid with a highly characteristic dynamics. We fit our experimental response at one temperature to obtain material parameters. Force-time data can be…
▽ More
We describe the complex time-dependence of the build up of force exerted by a clamped photo-elastomer under illumination. Nonlinear (non-Beer) absorption leads to a bleaching wave of a significant cis isomer dye concentration deeply penetrating the solid with a highly characteristic dynamics. We fit our experimental response at one temperature to obtain material parameters. Force-time data can be matched at all other temperatures with no fitting required -- our model provides a universal description of this unusual dynamics. The description is unambiguous since these are clamped systems where gross polymer motion is suppressed as a possible source of anomalous dynamics. Future experiments are suggested.
△ Less
Submitted 26 March, 2013;
originally announced March 2013.
-
Photoferroelectric solar to electrical conversion
Authors:
Milos Knezevic,
Mark Warner
Abstract:
We propose a charge pump which converts solar energy into DC electricity. It is based on cyclic changes in the spontaneous electric polarization of a photoferroelectric material, which allows a transfer of charge from a low to a high voltage. To estimate the power efficiency we use a photoferroelectric liquid crystal as the working substance. For a specific choice of material, an efficiency of…
▽ More
We propose a charge pump which converts solar energy into DC electricity. It is based on cyclic changes in the spontaneous electric polarization of a photoferroelectric material, which allows a transfer of charge from a low to a high voltage. To estimate the power efficiency we use a photoferroelectric liquid crystal as the working substance. For a specific choice of material, an efficiency of $2\%$ is obtained.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Theory of photoferroelectric response in SmC* liquids
Authors:
Milos Knezevic,
Mark Warner
Abstract:
We are concerned with the modification of liquid crystalline and polar order in SmC* liquids by illumination. In particular we show that non-uniformity due to absorption and also dynamics, can be complex. The variation of polarization with temperature, while illuminated, is modified from that assuming uniformity. Apparent changes of polarization with illumination will be shown to be underestimated…
▽ More
We are concerned with the modification of liquid crystalline and polar order in SmC* liquids by illumination. In particular we show that non-uniformity due to absorption and also dynamics, can be complex. The variation of polarization with temperature, while illuminated, is modified from that assuming uniformity. Apparent changes of polarization with illumination will be shown to be underestimated due to non-uniformity. The dynamics is shown to depend on propagating fronts of photo-conversion penetrating the sample.
△ Less
Submitted 21 June, 2012;
originally announced June 2012.
-
Blueprinting Nematic Glass: Systematically Constructing and Combining Active Points of Curvature for Emergent Morphology
Authors:
Carl D. Modes,
Mark Warner
Abstract:
Much recent progress has been made in the study of nematic solids, both glassy and elastomeric, particularly in the realm of stress-free, defect-driven deformation in thin sheets of material. In this paper we consider a subset of texture domains in nematic glasses that are simple to synthesize, and explore the ways that these simple domains may be compatibly combined to yield analogs of the tradit…
▽ More
Much recent progress has been made in the study of nematic solids, both glassy and elastomeric, particularly in the realm of stress-free, defect-driven deformation in thin sheets of material. In this paper we consider a subset of texture domains in nematic glasses that are simple to synthesize, and explore the ways that these simple domains may be compatibly combined to yield analogs of the traditional smooth disclination defect textures seen in standard liquid crystals. We calculate the deformation properties of these constructed textures, and show that, subject to the compatibility constraints of the construction, these textures may be further combined to achieve shape blueprinting of 3-D structures from flat sheets.
△ Less
Submitted 5 May, 2011;
originally announced May 2011.
-
Ultralong Copper Phthalocyanine Nanowires with New Crystal Structure and Broad Optical Absorption
Authors:
Hai Wang,
Soumaya Mauthoor,
Salahud Din,
Jules A. Gardener,
Rio Chang,
Marc Warner,
Gabriel Aeppli,
David W. McComb,
Mary P. Ryan,
Wei Wu,
Andrew J. Fisher,
A. Marshall Stoneham,
Sandrine Heutz
Abstract:
The development of molecular nanostructures plays a major role in emerging organic electronic applications, as it leads to improved performance and is compatible with our increasing need for miniaturisation. In particular, nanowires have been obtained from solution or vapour phase and have displayed high conductivity, or large interfacial areas in solar cells. In all cases however, the crystal str…
▽ More
The development of molecular nanostructures plays a major role in emerging organic electronic applications, as it leads to improved performance and is compatible with our increasing need for miniaturisation. In particular, nanowires have been obtained from solution or vapour phase and have displayed high conductivity, or large interfacial areas in solar cells. In all cases however, the crystal structure remains as in films or bulk, and the exploitation of wires requires extensive post-growth manipulation as their orientations are random. Here we report copper phthalocyanine (CuPc) nanowires with diameters of 10-100 nm, high directionality and unprecedented aspect ratios. We demonstrate that they adopt a new crystal phase, designated eta-CuPc, where the molecules stack along the long axis. The resulting high electronic overlap along the centimetre length stacks achieved in our wires mediates antiferromagnetic couplings and broadens the optical absorption spectrum. The ability to fabricate ultralong, flexible metal phthalocyanine nanowires opens new possibilities for applications of these simple molecules.
△ Less
Submitted 9 December, 2010;
originally announced December 2010.
-
The self-stabilising dynamics of bicycles
Authors:
Mark Warner,
Daniel Corbett
Abstract:
We analyse the classical problem of the stability of bicycles when moving quickly and upright. Developing a lean causes the front wheel to turn thereby setting the bicycle instantaneously into circular motion. The centripetal force associated with the lean-dependent turning circle gives a restoring torque which corrects the lean. The force also helps self-steer the front wheel, ensuring the bicycl…
▽ More
We analyse the classical problem of the stability of bicycles when moving quickly and upright. Developing a lean causes the front wheel to turn thereby setting the bicycle instantaneously into circular motion. The centripetal force associated with the lean-dependent turning circle gives a restoring torque which corrects the lean. The force also helps self-steer the front wheel, ensuring the bicycle continues in an essentially straight path. We give the frequency of lean oscillations about the vertical executed during riding. As in the literature, we discuss the neglect of gyroscopic effects, which experiment suggests are negligible.
△ Less
Submitted 1 November, 2011; v1 submitted 28 September, 2010;
originally announced September 2010.
-
Initializing, manipulating and storing quantum information with bismuth dopants in silicon
Authors:
Gavin W. Morley,
Marc Warner,
A. Marshall Stoneham,
P. Thornton Greenland,
Johan van Tol,
Christopher W. M. Kay,
Gabriel Aeppli
Abstract:
A prerequisite for exploiting spins for quantum data storage and processing is long spin coherence times. Phosphorus dopants in silicon (Si:P) have been favoured as hosts for such spins because of measured electron spin coherence times (T2) longer than any other electron spin in the solid state: 14 ms at 7 K. Heavier impurities such as bismuth in silicon (Si:Bi) could be used in conjunction with S…
▽ More
A prerequisite for exploiting spins for quantum data storage and processing is long spin coherence times. Phosphorus dopants in silicon (Si:P) have been favoured as hosts for such spins because of measured electron spin coherence times (T2) longer than any other electron spin in the solid state: 14 ms at 7 K. Heavier impurities such as bismuth in silicon (Si:Bi) could be used in conjunction with Si:P for quantum information proposals that require two separately addressable spin species. However, the question of whether the incorporation of the much less soluble Bi into Si leads to defect species that destroy coherence has not been addressed. Here we show that schemes involving Si:Bi are indeed feasible as the electron spin coherence time T2 exceeds 1 ms at 10 K. We polarized the Si:Bi electrons and hyperpolarized the I=9/2 nuclear spin of 209Bi, manipulating both with pulsed magnetic resonance. The larger nuclear spin means that a Si:Bi dopant provides a 20-dimensional Hilbert space rather than the four dimensional Hilbert space of an I=1/2 Si:P dopant.
△ Less
Submitted 20 April, 2010;
originally announced April 2010.
-
Disclination-mediated thermo-optical response in nematic glass sheets
Authors:
Carl D. Modes,
Kaushik Bhattacharya,
Mark Warner
Abstract:
Nematic solids respond strongly to changes in ambient heat or light, significantly differently parallel and perpendicular to the director. This phenomenon is well characterized for uniform director fields, but not for defect textures. We analyze the elastic ground states of a nematic glass in the membrane approximation as a function of temperature for some disclination defects with an eye toward…
▽ More
Nematic solids respond strongly to changes in ambient heat or light, significantly differently parallel and perpendicular to the director. This phenomenon is well characterized for uniform director fields, but not for defect textures. We analyze the elastic ground states of a nematic glass in the membrane approximation as a function of temperature for some disclination defects with an eye towards reversibly inducing three-dimensional shapes from flat sheets of material, at the nano-scale all the way to macroscopic objects, including non-developable surfaces. The latter offers a new paradigm to actuation via switchable stretch in thin systems.
△ Less
Submitted 22 April, 2010; v1 submitted 11 December, 2009;
originally announced December 2009.
-
LSST Science Book, Version 2.0
Authors:
LSST Science Collaboration,
Paul A. Abell,
Julius Allison,
Scott F. Anderson,
John R. Andrew,
J. Roger P. Angel,
Lee Armus,
David Arnett,
S. J. Asztalos,
Tim S. Axelrod,
Stephen Bailey,
D. R. Ballantyne,
Justin R. Bankert,
Wayne A. Barkhouse,
Jeffrey D. Barr,
L. Felipe Barrientos,
Aaron J. Barth,
James G. Bartlett,
Andrew C. Becker,
Jacek Becla,
Timothy C. Beers,
Joseph P. Bernstein,
Rahul Biswas,
Michael R. Blanton,
Joshua S. Bloom
, et al. (223 additional authors not shown)
Abstract:
A survey that can cover the sky in optical bands over wide fields to faint magnitudes with a fast cadence will enable many of the exciting science opportunities of the next decade. The Large Synoptic Survey Telescope (LSST) will have an effective aperture of 6.7 meters and an imaging camera with field of view of 9.6 deg^2, and will be devoted to a ten-year imaging survey over 20,000 deg^2 south…
▽ More
A survey that can cover the sky in optical bands over wide fields to faint magnitudes with a fast cadence will enable many of the exciting science opportunities of the next decade. The Large Synoptic Survey Telescope (LSST) will have an effective aperture of 6.7 meters and an imaging camera with field of view of 9.6 deg^2, and will be devoted to a ten-year imaging survey over 20,000 deg^2 south of +15 deg. Each pointing will be imaged 2000 times with fifteen second exposures in six broad bands from 0.35 to 1.1 microns, to a total point-source depth of r~27.5. The LSST Science Book describes the basic parameters of the LSST hardware, software, and observing plans. The book discusses educational and outreach opportunities, then goes on to describe a broad range of science that LSST will revolutionize: mapping the inner and outer Solar System, stellar populations in the Milky Way and nearby galaxies, the structure of the Milky Way disk and halo and other objects in the Local Volume, transient and variable objects both at low and high redshift, and the properties of normal and active galaxies at low and high redshift. It then turns to far-field cosmological topics, exploring properties of supernovae to z~1, strong and weak lensing, the large-scale distribution of galaxies and baryon oscillations, and how these different probes may be combined to constrain cosmological models and the physics of dark energy.
△ Less
Submitted 1 December, 2009;
originally announced December 2009.
-
Elasticity of Polydomain Liquid Crystal Elastomers
Authors:
J. S. Biggins,
M. Warner,
K. Bhattacharya
Abstract:
We model polydomain liquid-crystal elastomers by extending the neo-classical soft and semi-soft free energies used successfully to describe monodomain samples. We show that there is a significant difference between polydomains cross-linked in homogeneous high symmetry states then cooled to low symmetry polydomain states and those cross-linked directly in the low symmetry polydomain state. For exam…
▽ More
We model polydomain liquid-crystal elastomers by extending the neo-classical soft and semi-soft free energies used successfully to describe monodomain samples. We show that there is a significant difference between polydomains cross-linked in homogeneous high symmetry states then cooled to low symmetry polydomain states and those cross-linked directly in the low symmetry polydomain state. For example, elastomers cross-linked in the isotropic state then cooled to a nematic polydomain will, in the ideal limit, be perfectly soft, and with the introduction of non-ideality, will deform at very low stress until they are macroscopically aligned. The director patterns observed in them will be disordered, characteristic of combinations of random deformations, and not disclination patterns. We expect these samples to exhibit elasticity significantly softer than monodomain samples. Polydomains cross-linked in the nematic polydomain state will be mechanically harder and contain characteristic schlieren director patterns. The models we use for polydomain elastomers are spatially heterogeneous, so rather than solving them exactly we elucidate this behavior by bounding the energies using Taylor-like (compatible test strain fields) and Sachs (constant stress) limits extended to non-linear elasticity. Good agreement is found with experiments that reveal the supersoft response of some polydomains. We also analyze smectic polydomain elastomers and propose that polydomain SmC* elastomers cross-linked in the SmA monodomain state are promising candidates for low field electrical actuation.
△ Less
Submitted 26 May, 2011; v1 submitted 18 November, 2009;
originally announced November 2009.
-
On the physical basis for the nematic rubber elastic free energy
Authors:
J. S. Biggins,
M. Warner
Abstract:
We discuss why it is physical to keep terms in the nematic rubber elastic free energy that reflect the order parameter dependence of the natural size of the network polymers. We address a point of difficulty in some mathematical approaches to this problem.
We discuss why it is physical to keep terms in the nematic rubber elastic free energy that reflect the order parameter dependence of the natural size of the network polymers. We address a point of difficulty in some mathematical approaches to this problem.
△ Less
Submitted 20 October, 2009;
originally announced October 2009.
-
Mechanical switching of ferro-electric rubber
Authors:
J. M. Adams,
M. Warner
Abstract:
At the A to C transition, smectic elastomers have recently been observed to undergo $\sim$35% spontaneous shear strains. We first explicitly describe how strains of up to twice this value could be mechanically or electrically induced in Sm-$C$ elastomers by rotation of the director on a cone around the layer normal at various elastic costs depending on constraints. Secondly, for typical sample g…
▽ More
At the A to C transition, smectic elastomers have recently been observed to undergo $\sim$35% spontaneous shear strains. We first explicitly describe how strains of up to twice this value could be mechanically or electrically induced in Sm-$C$ elastomers by rotation of the director on a cone around the layer normal at various elastic costs depending on constraints. Secondly, for typical sample geometries, we give the various microstructures in Sm-$C$ akin to those seen in nematic elastomers under distortions with constraints. It is possible to give explicit results for the nature of the textures. Chiral Sm-$C$ elastomers are ferro-electric. We calculate how the polarization could be mechanically reversed by large, hard or soft strains of the rubber, depending upon sample geometry.
△ Less
Submitted 9 December, 2008;
originally announced December 2008.
-
Silicon as a model ion trap: time domain measurements of donor Rydberg states
Authors:
N Q Vinh,
P T Greenland,
K Litvinenko,
B Redlich,
A F G van der Meer,
S A Lynch,
M Warner,
A M Stoneham,
G Aeppli,
D J Paul,
C R Pidgeon,
B N Murdin
Abstract:
One of the great successes of quantum physics is the description of the long-lived Rydberg states of atoms and ions. The Bohr model is equally applicable to donor impurity atoms in semiconductor physics, where the conduction band corresponds to the vacuum, and the loosely bound electron orbiting a singly charged core has a hydrogen-like spectrum according to the usual Bohr-Sommerfeld formula, sh…
▽ More
One of the great successes of quantum physics is the description of the long-lived Rydberg states of atoms and ions. The Bohr model is equally applicable to donor impurity atoms in semiconductor physics, where the conduction band corresponds to the vacuum, and the loosely bound electron orbiting a singly charged core has a hydrogen-like spectrum according to the usual Bohr-Sommerfeld formula, shifted to the far-infrared due to the small effective mass and high dielectric constant. Manipulation of Rydberg states in free atoms and ions by single and multi-photon processes has been tremendously productive since the development of pulsed visible laser spectroscopy. The analogous manipulations have not been conducted for donor impurities in silicon. Here we use the FELIX pulsed free electron laser to perform time-domain measurements of the Rydberg state dynamics in phosphorus- and arsenic-doped silicon and we have obtained lifetimes consistent with frequency domain linewidths for isotopically purified silicon. This implies that the dominant decoherence mechanism for excited Rydberg states is lifetime broadening, just as for atoms in ion traps. The experiments are important because they represent the first step towards coherent control and manipulation of atomic-like quantum levels in the most common semiconductor and complement magnetic resonance experiments in the literature, which show extraordinarily long spin lattice relaxation times key to many well-known schemes for quantum computing qubits for the same impurities. Our results, taken together with the magnetic resonance data and progress in precise placement of single impurities, suggest that doped silicon, the basis for modern microelectronics, is also a model ion trap.
△ Less
Submitted 30 November, 2008;
originally announced December 2008.
-
LSST: from Science Drivers to Reference Design and Anticipated Data Products
Authors:
Željko Ivezić,
Steven M. Kahn,
J. Anthony Tyson,
Bob Abel,
Emily Acosta,
Robyn Allsman,
David Alonso,
Yusra AlSayyad,
Scott F. Anderson,
John Andrew,
James Roger P. Angel,
George Z. Angeli,
Reza Ansari,
Pierre Antilogus,
Constanza Araujo,
Robert Armstrong,
Kirk T. Arndt,
Pierre Astier,
Éric Aubourg,
Nicole Auza,
Tim S. Axelrod,
Deborah J. Bard,
Jeff D. Barr,
Aurelian Barrau,
James G. Bartlett
, et al. (288 additional authors not shown)
Abstract:
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the…
▽ More
(Abridged) We describe here the most ambitious survey currently planned in the optical, the Large Synoptic Survey Telescope (LSST). A vast array of science will be enabled by a single wide-deep-fast sky survey, and LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: probing dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. LSST will be a wide-field ground-based system sited at Cerro Pachón in northern Chile. The telescope will have an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg$^2$ field of view, and a 3.2 Gigapixel camera. The standard observing sequence will consist of pairs of 15-second exposures in a given field, with two such visits in each pointing in a given night. With these repeats, the LSST system is capable of imaging about 10,000 square degrees of sky in a single filter in three nights. The typical 5$σ$ point-source depth in a single visit in $r$ will be $\sim 24.5$ (AB). The project is in the construction phase and will begin regular survey operations by 2022. The survey area will be contained within 30,000 deg$^2$ with $δ<+34.5^\circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\% of the observing time will be devoted to a deep-wide-fast survey mode which will uniformly observe a 18,000 deg$^2$ region about 800 times (summed over all six bands) during the anticipated 10 years of operations, and yield a coadded map to $r\sim27.5$. The remaining 10\% of the observing time will be allocated to projects such as a Very Deep and Fast time domain survey. The goal is to make LSST data products, including a relational database of about 32 trillion observations of 40 billion objects, available to the public and scientists around the world.
△ Less
Submitted 23 May, 2018; v1 submitted 15 May, 2008;
originally announced May 2008.
-
Smectic-$A$ elastomers with weak director anchoring
Authors:
J. M. Adams,
M. Warner,
O. Stenull,
T. C. Lubensky
Abstract:
Experimentally it is possible to manipulate the director in a (chiral) smectic-$A$ elastomer using an electric field. This suggests that the director is not necessarily locked to the layer normal, as described in earlier papers that extended rubber elasticity theory to smectics. Here, we consider the case that the director is weakly anchored to the layer normal assuming that there is a free ener…
▽ More
Experimentally it is possible to manipulate the director in a (chiral) smectic-$A$ elastomer using an electric field. This suggests that the director is not necessarily locked to the layer normal, as described in earlier papers that extended rubber elasticity theory to smectics. Here, we consider the case that the director is weakly anchored to the layer normal assuming that there is a free energy penalty associated with relative tilt between the two. We use a recently developed weak-anchoring generalization of rubber elastic approaches to smectic elastomers and study shearing in the plane of the layers, stretching in the plane of the layers, and compression and elongation parallel to the layer normal. We calculate, inter alia, the engineering stress and the tilt angle between director and layer normal as functions of the applied deformation. For the latter three deformations, our results predict the existence of an instability towards the development of shear accompanied by smectic-$C$-like order.
△ Less
Submitted 6 March, 2008;
originally announced March 2008.
-
Smectic-C tilt under shear in Smectic-A elastomers
Authors:
Olaf Stenull,
T. C. Lubensky,
J. M. Adams,
Mark Warner
Abstract:
Stenull and Lubensky [Phys. Rev. E {\bf 76}, 011706 (2007)] have argued that shear strain and tilt of the director relative to the layer normal are coupled in smectic elastomers and that the imposition of one necessarily leads to the development of the other. This means, in particular, that a Smectic-A elastomer subjected to a simple shear will develop Smectic-C-like tilt of the director. Recent…
▽ More
Stenull and Lubensky [Phys. Rev. E {\bf 76}, 011706 (2007)] have argued that shear strain and tilt of the director relative to the layer normal are coupled in smectic elastomers and that the imposition of one necessarily leads to the development of the other. This means, in particular, that a Smectic-A elastomer subjected to a simple shear will develop Smectic-C-like tilt of the director. Recently, Kramer and Finkelmann [arXiv:0708.2024, Phys. Rev. E {\bf 78}, 021704 (2008)] performed shear experiments on Smectic-A elastomers using two different shear geometries. One of the experiments, which implements simple shear, produces clear evidence for the development of Smectic-C-like tilt. Here, we generalize a model for smectic elastomers introduced by Adams and Warner [Phys. Rev. E {\bf 71}, 021708 (2005)] and use it to study the magnitude of Smectic-C-like tilt under shear for the two geometries investigated by Kramer and Finkelmann. Using reasonable estimates of model parameters, we estimate the tilt angle for both geometries, and we compare our estimates to the experimental results. The other shear geometry is problematic since it introduces additional in-plane compressions in a sheet-like sample, thus inducing instabilities that we discuss.
△ Less
Submitted 8 August, 2008; v1 submitted 27 February, 2008;
originally announced February 2008.
-
Bleaching and stimulated recovery of dyes and of photo-cantilevers
Authors:
D. Corbett,
M. Warner
Abstract:
We examine how intense optical beams can penetrate deeply into highly absorbing media by a non-linear, photo-bleaching process. The role of stimulated recovery to the dye ground state can be important and is delineated. This analysis of non-linear absorption processes is applicable in general to situations where chromophores are irradiated, for instance in biology. We examine the implications fo…
▽ More
We examine how intense optical beams can penetrate deeply into highly absorbing media by a non-linear, photo-bleaching process. The role of stimulated recovery to the dye ground state can be important and is delineated. This analysis of non-linear absorption processes is applicable in general to situations where chromophores are irradiated, for instance in biology. We examine the implications for the bending of cantilevers made of heavily dye-loaded nematic photo-solids, that is nematic glasses and elastomers that have large mechanical reactions to light. In particular we describe the bending of cantilevers sufficiently absorbing that they would not bend if Beer's Law were applicable. We quantify the role of optically-generated heat in determining the mechanical response and conclude that in general it is minor in importance compared with optical effects.
△ Less
Submitted 17 February, 2008;
originally announced February 2008.
-
The dynamics of non-linear optical absorption
Authors:
D. Corbett,
C. L. van Oosten,
M. Warner
Abstract:
On traversing materials with absorbing dyes, weak optical beams develop a Beer (exponential) profile, while intense beams develop a spatially initially linear and then finally an exponential profile. This anomalous, deep penetration due to photo-bleaching of surface layers is important for heavy dye-loading and intense beams, for instance in photo-actuation. We address the problem of the evoluti…
▽ More
On traversing materials with absorbing dyes, weak optical beams develop a Beer (exponential) profile, while intense beams develop a spatially initially linear and then finally an exponential profile. This anomalous, deep penetration due to photo-bleaching of surface layers is important for heavy dye-loading and intense beams, for instance in photo-actuation. We address the problem of the evolution in time from initial Beer's Law to deeply penetrating optical profiles in dyes. Our solution of the coupled, non-linear, partial differential equations governing the spatio-temporal decay of the Poynting flux and the non-linear dynamics of the \textit{trans-cis} conversion is applicable to general systems of photo-active molecules under intense irradiation, for instance in biology, in spectroscopy and in opto-mechanical devices.
△ Less
Submitted 15 February, 2008; v1 submitted 11 December, 2007;
originally announced December 2007.
-
Reflectivity of cholesteric liquid crystals with spatially varying pitch
Authors:
S. Kutter,
M. Warner
Abstract:
Solids with spatially varying photonic structure offer gaps to light of a wider range of frequencies than do simple photonic systems. We solve numerically the field distribution in a solid cholesteric with a linearly varying inverse pitch (helical wavevector) using equations we derive for the general case. The simple idea that the position where the Bragg condition is locally satisfied is where…
▽ More
Solids with spatially varying photonic structure offer gaps to light of a wider range of frequencies than do simple photonic systems. We solve numerically the field distribution in a solid cholesteric with a linearly varying inverse pitch (helical wavevector) using equations we derive for the general case. The simple idea that the position where the Bragg condition is locally satisfied is where reflection takes place is only true in part. Here, reflection is due to a region where the waves are forced to become evanescent, and the rate of variation of structure determines over which distance the waves decay and therefore how complete reflection is. The approximate local Bragg-de Vries schemes are shown to break down in detail at the edges of the gap, and an analytical estimate is given for the transmission coefficient.
△ Less
Submitted 17 October, 2003; v1 submitted 30 April, 2003;
originally announced April 2003.
-
Uniaxial and biaxial soft deformations of nematic elastomers
Authors:
M. Warner,
S. Kutter
Abstract:
We give a geometric interpretation of the soft elastic deformation modes of nematic elastomers, with explicit examples, for both uniaxial and biaxial nematic order. We show the importance of body rotations in this non-classical elasticity and how the invariance under rotations of the reference and target states gives soft elasticity (the Golubovic and Lubensky theorem). The role of rotations mak…
▽ More
We give a geometric interpretation of the soft elastic deformation modes of nematic elastomers, with explicit examples, for both uniaxial and biaxial nematic order. We show the importance of body rotations in this non-classical elasticity and how the invariance under rotations of the reference and target states gives soft elasticity (the Golubovic and Lubensky theorem). The role of rotations makes the Polar Decomposition Theorem vital for decomposing general deformations into body rotations and symmetric strains. The role of the square roots of tensors is discussed in this context and that of finding explicit forms for soft deformations (the approach of Olmsted).
△ Less
Submitted 18 February, 2002; v1 submitted 28 November, 2001;
originally announced November 2001.
-
Photonic band structure of highly deformable, self-assembling systems
Authors:
Peter A. Bermel,
Mark Warner
Abstract:
We calculate the photonic band structure at normal incidence of highly deformable, self-assembling systems - cholesteric elastomers subjected to external stress. Cholesterics display brilliant reflection and lasing owing to gaps in their photonic band structure. The band structure of cholesteric elastomers varies sensitively with strain, showing new gaps opening up and shifting in frequency. A n…
▽ More
We calculate the photonic band structure at normal incidence of highly deformable, self-assembling systems - cholesteric elastomers subjected to external stress. Cholesterics display brilliant reflection and lasing owing to gaps in their photonic band structure. The band structure of cholesteric elastomers varies sensitively with strain, showing new gaps opening up and shifting in frequency. A novel prediction of a total band gap is made, and is expected to occur in the vicinity of the previously observed de Vries bandgap, which is only for one polarisation.
△ Less
Submitted 2 July, 2001;
originally announced July 2001.
-
Imprinted Networks as Chiral Pumps
Authors:
Y. Mao,
M. Warner
Abstract:
We investigate the interaction between a chirally imprinted network and a solvent of chiral molecules. We find, a liquid crystalline polymer network is preferentially swollen by one component of a racemic solvent. This ability to separate is linked to the chiral order parameter of the network, and can be reversibly controlled via temperature or a mechanical deformation. It is maximal near the po…
▽ More
We investigate the interaction between a chirally imprinted network and a solvent of chiral molecules. We find, a liquid crystalline polymer network is preferentially swollen by one component of a racemic solvent. This ability to separate is linked to the chiral order parameter of the network, and can be reversibly controlled via temperature or a mechanical deformation. It is maximal near the point at which the network loses its imprinted structure. One possible practical application of this effect would be a mechanical device for sorting mixed chiral molecules.
△ Less
Submitted 12 January, 2001;
originally announced January 2001.
-
Linear hydrodynamics and viscoelasticity of nematic elastomers
Authors:
E. M. Terentjev,
M. Warner
Abstract:
We develop a continuum theory of linear viscoelastic response in oriented monodomain nematic elastomers. The expression for dissipation function is analogous to the Leslie-Ericksen version of anisotropic nematic viscosity; we propose the relations between the anisotropic rubber moduli and new viscous coefficients. A new dimensionless number is introduced, which describes the relative magnitude o…
▽ More
We develop a continuum theory of linear viscoelastic response in oriented monodomain nematic elastomers. The expression for dissipation function is analogous to the Leslie-Ericksen version of anisotropic nematic viscosity; we propose the relations between the anisotropic rubber moduli and new viscous coefficients. A new dimensionless number is introduced, which describes the relative magnitude of viscous and rubber-elastic torques. In an elastic medium with an independently mobile internal degree of freedom, the nematic director with its own relaxation dynamics, the model shows a dramatic decrease in the dynamic modulus in certain deformation geometries. The degree to which the storage modulus does not altogether drop to zero is shown to be both dependent on frequency and to be proportional to the semi-softness, the non-ideality of a nematic network. We consider the most interesting geometry for the implementation of the theory, calculating the dynamic response to an imposed simple shear and making predictions for effective moduli and (exceptionally high) loss factors.
△ Less
Submitted 4 January, 2001;
originally announced January 2001.
-
Untwisting of a cholesteric elastomer by a mechanical field
Authors:
M. Warner,
E. M. Terentjev,
R. B. Meyer,
Y. Mao
Abstract:
A mechanical strain field applied to a monodomain cholesteric elastomer will unwind the helical director distribution. There is an analogy with the classical problem of an electric field applied to a cholesteric liquid crystal, but with important differences. Frank elasticity is of minor importance unless the gel is very weak. The interplay is between director anchoring to the rubber elastic mat…
▽ More
A mechanical strain field applied to a monodomain cholesteric elastomer will unwind the helical director distribution. There is an analogy with the classical problem of an electric field applied to a cholesteric liquid crystal, but with important differences. Frank elasticity is of minor importance unless the gel is very weak. The interplay is between director anchoring to the rubber elastic matrix and the external mechanical field. Stretching perpendicular to the helix axis induces the uniform unwound state via the elimination of sharp, pinned twist walls above a critical strain. Unwinding through conical director states occurs when the elastomer is stretched along the helical axis.
△ Less
Submitted 11 April, 2000;
originally announced April 2000.