Showing 1–42 of 42 results for author: Worm, S

Preliminary results of the Single Event Effect testing for the ULTRASAT sensors

Authors: Vlad Dumitru Berlea, Arooj Asif, Merlin F. Barschke, David Berge, Juan Maria Haces Crespo, Gianluca Giavitto, Shashank Kumar, Andrea Porelli, Nicola de Simone, Jason Watson, Steven Worm, Francesco Zappon, Adi Birman, Shay Alfassi, Amos Feningstein, Eli Waxman, Udi Netzer, Tuvia Liran, Ofer Lapid, Viktor M. Algranatti, Yossi Schvartzvald

Abstract: ULTRASAT (ULtra-violet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform a deep time-resolved all-sky survey in the near-ultraviolet (NUV) spectrum. The science objectives are the detection of counterparts to short-lived transient astronomical events such as gravitational wave sources and supernovae. The mission is led by the Weizmann Institute of Science and is plan… ▽ More ULTRASAT (ULtra-violet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform a deep time-resolved all-sky survey in the near-ultraviolet (NUV) spectrum. The science objectives are the detection of counterparts to short-lived transient astronomical events such as gravitational wave sources and supernovae. The mission is led by the Weizmann Institute of Science and is planned for launch in 2026 in collaboration with the Israeli Space Agency and NASA. DESY will provide the UV camera, composed by the detector assembly located in the telescope focal plane and the remote electronics unit. The camera is composed out of four back-metallized CMOS Image Sensors (CIS) manufactured in the 4T, dual gain Tower process. As part of the radiation qualification of the camera, Single Event Effect (SEE) testing has been performed by irradiating the sensor with heavy ions at the RADEF, Jyvaskyla facility. Preliminary results of both Single Event Upset (SEU) and Single Event Latch-up (SEL) occurrence rate in the sensor are presented. Additionally, an in-orbit SEE rate simulation has been performed in order to gain preliminary knowledge about the expected effect of SEE on the mission. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Temporal and dosimetric beam monitoring of individual pulses in FLASH Radiotherapy using Timepix3 pixelated detector placed out-of-field

Authors: Cristina Oancea, Katerina Sykorova, Jan Jakubek, Jiri Pivec, Felix Riemer, Steven Worm, Alexandra Bourgouin

Abstract: FLASH radiotherapy necessitates the development of advanced Quality Assurance methods and detectors for accurate and online monitoring of the radiation field. This study introduces enhanced time-resolution detection systems and methods tailored for single-pulse detection. The goal of this work was to measure the delivered number of pulses, investigate temporal structure of individual pulses, and t… ▽ More FLASH radiotherapy necessitates the development of advanced Quality Assurance methods and detectors for accurate and online monitoring of the radiation field. This study introduces enhanced time-resolution detection systems and methods tailored for single-pulse detection. The goal of this work was to measure the delivered number of pulses, investigate temporal structure of individual pulses, and to develop a method for dose-per-pulse (DPP) monitoring based on secondary radiation particles produced in the experimental room. A 20 MeV electron beam generated from a linear accelerator (LINAC) was delivered to a water phantom. Ultra-high dose-per-pulse (UHDPP) electron beams were used with a dose per pulse ranging from 1 Gy to over 7 Gy. The pulse lengths ranged from 1.18 us to 2.88 us at a pulse rate frequency of 5 Hz. A semiconductor pixel detector Timepix3 (TPX3) was used to track direct interactions in the Silicon sensor created by single secondary particles. Measurements were performed in the air, while the detector was positioned out-of-field at a lateral distance of 200 cm parallel with the LINAC exit window. The dose deposited in the silicon was measured along with the pulse length and the nanostructure of the pulse. Simultaneously deposited energy and time of arrival of single particles were measured with a precision of 1.56 ns. The measured pulse count agreed with the delivered values. A linear response (R^2 = 0.999) was established between the delivered beam current and the measured dose at the detector position (orders of nGy). The difference between the average measured and average delivered pulse length was 0.003(30) us. This simple non-invasive method, exhibits no limitations on the delivered DPP within the range used during this investigation. It enhances the precision and real-time monitoring of FLASH treatment plans with nanosecond precision. △ Less

Submitted 21 April, 2024; originally announced April 2024.

Comments: 24 pages, 8 figures

Radiation Hardness of MALTA2 Monolithic CMOS Sensors on Czochralski Substrates

Authors: Milou van Rijnbach, Dumitru Vlad Berlea, Valerio Dao, Martin Gaži, Phil Allport, Ignacio Asensi Tortajada, Prafulla Behera, Daniela Bortoletto, Craig Buttar, Florian Dachs, Ganapati Dash, Dominik Dobrijević, Lucian Fasselt, Leyre Flores Sanz de Acedo, Andrea Gabrielli, Vicente González, Giuliano Gustavino, Pranati Jana, Heinz Pernegger, Petra Riedler, Heidi Sandaker, Carlos Solans Sánchez, Walter Snoeys, Tomislav Suligoj, Marcos Vázquez Núñez , et al. (4 additional authors not shown)

Abstract: MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) no… ▽ More MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) noise, and optimise the charge collection geometry. Compared to its predecessors, MALTA2 targets the use of a high-resistivity, thick Czochralski (Cz) substrates in order to demonstrate radiation hardness in terms of detection efficiency and timing resolution up to 3E15 1 MeV neq/cm2 with backside metallisation to achieve good propagation of the bias voltage. This manuscript shows the results that were obtained with non-irradiated and irradiated MALTA2 samples on Cz substrates from the CERN SPS test beam campaign from 2021-2023 using the MALTA telescope. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Total Ionizing Dose Effects on CMOS Image Sensor for the ULTRASAT Space Mission

Authors: Vlad D. Berlea, Steven Worm, Nirmal Kaipachery, Shrinivasrao R. Kulkarni, Shashank Kumar, Merlin F. Barschke, David Berge, Adi Birman, Shay Alfassi, Amos Fenigstein

Abstract: ULTRASAT (ULtraviolet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform deep time-resolved surveys in the near-ultraviolet spectrum. ULTRASAT is a space mission led by the Weizmann Institute of Science and the Israel Space Agency and is planned for launch in 2025. The camera implements backside-illuminated, stitched pixel sensors. The pixel has a dual-conversion-gain… ▽ More ULTRASAT (ULtraviolet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform deep time-resolved surveys in the near-ultraviolet spectrum. ULTRASAT is a space mission led by the Weizmann Institute of Science and the Israel Space Agency and is planned for launch in 2025. The camera implements backside-illuminated, stitched pixel sensors. The pixel has a dual-conversion-gain 4T architecture, with a pitch of $9.5$ $μm$ and is produced in a $180$ $nm$ process by Tower Semiconductor. Before the final sensor was available for testing, test sensors provided by Tower were used to gain first insights into the pixel's radiation tolerance. One of the main contributions to sensor degradation due to radiation for the ULTRASAT mission is Total Ionizing Dose (TID). TID measurements on the test sensors have been performed with a Co-60 gamma source at Helmholz Zentrum Berlin and CC-60 facility at CERN and preliminary results are presented. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: Part of the conference: Frontier Detectors for Frontier Physics: 15th Pisa Meeting on Advanced Detectors, La Biodola - Isola d'Elba Published in: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment Available online 15 June 2023, 168463. In Press, Journal Pre-proof

Journal ref: Nuclear Inst. and Methods inPhysics Research, A (2023) 168463

ULTRASAT: A wide-field time-domain UV space telescope

Authors: Y. Shvartzvald, E. Waxman, A. Gal-Yam, E. O. Ofek, S. Ben-Ami, D. Berge, M. Kowalski, R. Bühler, S. Worm, J. E. Rhoads, I. Arcavi, D. Maoz, D. Polishook, N. Stone, B. Trakhtenbrot, M. Ackermann, O. Aharonson, O. Birnholtz, D. Chelouche, D. Guetta, N. Hallakoun, A. Horesh, D. Kushnir, T. Mazeh, J. Nordin , et al. (19 additional authors not shown)

Abstract: The Ultraviolet Transient Astronomy Satellite (ULTRASAT) is scheduled to be launched to geostationary orbit in 2026. It will carry a telescope with an unprecedentedly large field of view (204 deg$^2$) and NUV (230-290nm) sensitivity (22.5 mag, 5$σ$, at 900s). ULTRASAT will conduct the first wide-field survey of transient and variable NUV sources and will revolutionize our ability to study the hot… ▽ More The Ultraviolet Transient Astronomy Satellite (ULTRASAT) is scheduled to be launched to geostationary orbit in 2026. It will carry a telescope with an unprecedentedly large field of view (204 deg$^2$) and NUV (230-290nm) sensitivity (22.5 mag, 5$σ$, at 900s). ULTRASAT will conduct the first wide-field survey of transient and variable NUV sources and will revolutionize our ability to study the hot transient universe: It will explore a new parameter space in energy and time-scale (months long light-curves with minutes cadence), with an extra-Galactic volume accessible for the discovery of transient sources that is $>$300 times larger than that of GALEX and comparable to that of LSST. ULTRASAT data will be transmitted to the ground in real-time, and transient alerts will be distributed to the community in $<$15 min, enabling a vigorous ground-based follow-up of ULTRASAT sources. ULTRASAT will also provide an all-sky NUV image to $>$23.5 AB mag, over 10 times deeper than the GALEX map. Two key science goals of ULTRASAT are the study of mergers of binaries involving neutron stars, and supernovae: With a large fraction ($>$50%) of the sky instantaneously accessible, fast (minutes) slewing capability and a field-of-view that covers the error ellipses expected from GW detectors beyond 2025, ULTRASAT will rapidly detect the electromagnetic emission following BNS/NS-BH mergers identified by GW detectors, and will provide continuous NUV light-curves of the events; ULTRASAT will provide early (hour) detection and continuous high (minutes) cadence NUV light curves for hundreds of core-collapse supernovae, including for rarer supernova progenitor types. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Comments: 40 pages, 16 figures, 3 tables. Submitted to the AAS journals

Performance of the MALTA Telescope

Authors: Milou van Rijnbach, Giuliano Gustavino, Phil Allport, Igancio Asensi, Dumitru Vlad Berlea, Daniela Bortoletto, Craig Buttar, Edoardo Charbon, Florian Dachs, Valerio Dao, Dominik Dobrijevic, Leyre Flores Sanz de Acedo, Andrea Gabrielli, Martin Gazi, Laura Gonella, Vicente Gonzalez, Stefan Guindon, Matt LeBlanc, Heinz Pernegger, Francesco Piro, Petra Riedler, Heidi Sandaker, Abhishek Sharma, Carlos Solans Sanchez, Walter Snoeys , et al. (5 additional authors not shown)

Abstract: MALTA is part of the Depleted Monolithic Active Pixel sensors designed in Tower 180nm CMOS imaging technology. A custom telescope with six MALTA planes has been developed for test beam campaigns at SPS, CERN, with the ability to host several devices under test. The telescope system has a dedicated custom readout, online monitoring integrated into DAQ with realtime hit map, time distribution and ev… ▽ More MALTA is part of the Depleted Monolithic Active Pixel sensors designed in Tower 180nm CMOS imaging technology. A custom telescope with six MALTA planes has been developed for test beam campaigns at SPS, CERN, with the ability to host several devices under test. The telescope system has a dedicated custom readout, online monitoring integrated into DAQ with realtime hit map, time distribution and event hit multiplicity. It hosts a dedicated fully configurable trigger system enabling to trigger on coincidence between telescope planes and timing reference from a scintillator. The excellent time resolution performance allows for fast track reconstruction, due to the possibility to retain a low hit multiplicity per event which reduces the combinatorics. This paper reviews the architecture of the system and its performance during the 2021 and 2022 test beam campaign at the SPS North Area. △ Less

Submitted 21 April, 2023; v1 submitted 3 April, 2023; originally announced April 2023.

MALTA-Cz: A radiation hard full-size monolithic CMOS sensor with small electrodes on high-resistivity Czochralski substrate

Authors: H. Pernegger, P. Allport, D. V. Berlea, A. Birman, D. Bortoletto, C. Buttar, E. Charbon, F. Dachs, V. Dao, H. Denizli, D. Dobrijevic, M. Dyndal, A. Fenigstein, L. Flores Sanz de Acedo, P. Freeman, A. Gabrielli, M. Gazi, L. Gonella, V. Gonzalez, G. Gustavino, A. Haim, T. Kugathasan, M. LeBlanc, M. Munker, K. Y. Oyulmaz , et al. (14 additional authors not shown)

Abstract: Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granulari… ▽ More Depleted Monolithic Active Pixel Sensor (DMAPS) sensors developed in the Tower Semiconductor 180 nm CMOS imaging process have been designed in the context of the ATLAS ITk upgrade Phase-II at the HL-LHC and for future collider experiments. The "MALTA-Czochralski (MALTA-Cz)" full size DMAPS sensor has been developed with the goal to demonstrate a radiation hard, thin CMOS sensor with high granularity, high hit-rate capability, fast response time and superior radiation tolerance. The small pixel size ($36.4\times 36.4$~$μ$m$^2$) provides high spatial resolution. Its asynchronous readout architecture is designed for high hit-rates and fast time response in triggered and trigger-less detector applications. The readout architecture is designed to stream all hit data to the multi-channel output which allows an off-sensor trigger formation and the use of hit-time information for event tagging. The sensor manufacturing has been optimised through process adaptation and special implant designs to allow the manufacturing of small electrode DMAPS on thick high-resistivity p-type Czochralski substrate. The special processing ensures excellent charge collection and charge particle detection efficiency even after a high level of radiation. Furthermore the special implant design and use of a Czochralski substrate improves the sensor's time resolution. This paper presents a summary of sensor design optimisation through process and implant choices and TCAD simulation to model the signal response. Beam and laboratory test results on unirradiated and irradiated sensors have shown excellent detection efficiency after a dose of $2\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. The time resolution of the sensor is measured to be $σ=2$~ns. △ Less

Submitted 13 September, 2023; v1 submitted 10 January, 2023; originally announced January 2023.

Journal ref: JINST 18 P09018 (2023)

Timing performance of radiation hard MALTA monolithic Pixel sensors

Authors: G. Gustavino, P. Allport, I. Asensi, D. V. Berlea, D. Bortoletto, C. Buttar, F. Dachs, V. Dao, H. Denizli, D. Dobrijevic, L. Flores, A. Gabrielli, L. Gonella, V. González, M. LeBlanc, K. Oyulmaz, H. Pernegger, F. Piro, P. Riedler, H. Sandaker, C. Solans, W. Snoeys, T. Suligoj, M. van Rijnbach, A. Sharma , et al. (4 additional authors not shown)

Abstract: The MALTA family of Depleted Monolithic Active Pixel Sensor (DMAPS) produced in Tower 180 nm CMOS technology targets radiation hard applications for the HL-LHC and beyond. Several process modifications and front-end improvements have resulted in radiation hardness up to $2 \times 10^{15}~1~\text{MeV}~\text{n}_{eq}/\text{cm}^2$ and time resolution below 2 ns, with uniform charge collection efficien… ▽ More The MALTA family of Depleted Monolithic Active Pixel Sensor (DMAPS) produced in Tower 180 nm CMOS technology targets radiation hard applications for the HL-LHC and beyond. Several process modifications and front-end improvements have resulted in radiation hardness up to $2 \times 10^{15}~1~\text{MeV}~\text{n}_{eq}/\text{cm}^2$ and time resolution below 2 ns, with uniform charge collection efficiency across the Pixel of size $36.4 \times 36.4~μ\text{m}^2$ with a $3~μ\text{m}^2$ electrode size. The MALTA2 demonstrator produced in 2021 on high-resistivity epitaxial silicon and on Czochralski substrates implements a new cascoded front-end that reduces the RTS noise and has a higher gain. This contribution shows results from MALTA2 on timing resolution at the nanosecond level from the CERN SPS test-beam campaign of 2021. △ Less

Submitted 31 January, 2023; v1 submitted 29 September, 2022; originally announced September 2022.

Comments: 8 pages, 8 figures. Submitted to Journal of Instrumentation (JINST). Proceedings of the 23rd International Workshop on Radiation Imaging Detectors IWORID 2022

Report of the Instrumentation Frontier Working Group for Snowmass 2021

Authors: Phillip S. Barbeau, Petra Merkel, Jinlong Zhang, Darin Acosta, Anthony A. Affolder, Artur Apresyan, Marina Artuso, Vallary Bhopatkar, Stephen Butalla, Gabriella A. Carini, Thomas Cecil, Amy Connolly, C. Eric Dahl, Allison Deiana, Katherine Dunne, Carlos O. Escobar, Juan Estrada, Farah Fahim, James E. Fast, Maurice Garcia-Sciveres, Roxanne Guenette, Michael T. Hedges, Kent Irwin, Albrecht Karle, Wes Ketchum , et al. (20 additional authors not shown)

Abstract: Detector instrumentation is at the heart of scientific discoveries. Cutting edge technologies enable US particle physics to play a leading role worldwide. This report summarizes the current status of instrumentation for High Energy Physics (HEP), the challenges and needs of future experiments and indicates high priority research areas. The Snowmass Instrumentation Frontier studies detector technol… ▽ More Detector instrumentation is at the heart of scientific discoveries. Cutting edge technologies enable US particle physics to play a leading role worldwide. This report summarizes the current status of instrumentation for High Energy Physics (HEP), the challenges and needs of future experiments and indicates high priority research areas. The Snowmass Instrumentation Frontier studies detector technologies and Research and Development (R&D) needed for future experiments in collider physics, neutrino physics, rare and precision physics and at the cosmic frontier. It is divided into more or less diagonal areas with some overlap among a few of them. We lay out five high-level key messages that are geared towards ensuring the health and competitiveness of the US detector instrumentation community, and thus the entire particle physics landscape. △ Less

Submitted 3 November, 2022; v1 submitted 28 September, 2022; originally announced September 2022.

Comments: 53 pages, 0 figures, contribution to Snowmass 2021

Recent results with radiation-tolerant TowerJazz 180 nm MALTA Sensors

Authors: Matt LeBlanc, Phil Allport, Igancio Asensi, Dumitru-Vlad Berlea, Daniela Bortoletto, Craig Buttar, Florian Dachs, Valerio Dao, Haluk Denizli, Dominik Dobrijevic, Leyre Flores, Andrea Gabrielli, Laura Gonella, Vicente González, Giuliano Gustavino, Kaan Oyulmaz, Heinz Pernegger, Francesco Piro, Petra Riedler, Heidi Sandaker, Carlos Solans, Walter Snoeys, Tomislav Suligoj, Milou van Rijnbach, Abhishek Sharma , et al. (4 additional authors not shown)

Abstract: To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 n… ▽ More To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 nm TowerJazz CMOS imaging technology. MALTA have a pixel pitch well below current hybrid pixel detectors, high time resolution (< 2 ns) and excellent charge collection efficiency across pixel geometries. These sensors have a total silicon thickness of between 50-300 $μ$m, implying reduced material budgets and multiple scattering rates for future detectors which utilize such technology. Furthermore, their monolithic design bypasses the costly stage of bump-bonding in hybrid sensors and can substantially reduce detector costs. This contribution presents the latest results from characterization studies of the MALTA2 sensors, including results demonstrating the radiation tolerance of these sensors. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 4 pages, 4 figures. Accepted by Nuclear Inst. and Methods in Physics Research, A (Proceedings of VCI 2022)

Solid State Detectors and Tracking for Snowmass

Authors: A. Affolder, A. Apresyan, S. Worm, M. Albrow, D. Ally, D. Ambrose, E. Anderssen, N. Apadula, P. Asenov, W. Armstrong, M. Artuso, A. Barbier, P. Barletta, L. Bauerdick, D. Berry, M. Bomben, M. Boscardin, J. Brau, W. Brooks, M. Breidenbach, J. Buckley, V. Cairo, R. Caputo, L. Carpenter, M. Centis-Vignali , et al. (110 additional authors not shown)

Abstract: Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the… ▽ More Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03). △ Less

Submitted 19 October, 2022; v1 submitted 8 September, 2022; originally announced September 2022.

Comments: for the Snowmass Instrumentation Frontier Solid State Detector and Tracking community

First Dark Matter Search Results from the LUX-ZEPLIN (LZ) Experiment

Authors: J. Aalbers, D. S. Akerib, C. W. Akerlof, A. K. Al Musalhi, F. Alder, A. Alqahtani, S. K. Alsum, C. S. Amarasinghe, A. Ames, T. J. Anderson, N. Angelides, H. M. Araújo, J. E. Armstrong, M. Arthurs, S. Azadi, A. J. Bailey, A. Baker, J. Balajthy, S. Balashov, J. Bang, J. W. Bargemann, M. J. Barry, J. Barthel, D. Bauer, A. Baxter , et al. (322 additional authors not shown)

Abstract: The LUX-ZEPLIN experiment is a dark matter detector centered on a dual-phase xenon time projection chamber operating at the Sanford Underground Research Facility in Lead, South Dakota, USA. This Letter reports results from LUX-ZEPLIN's first search for weakly interacting massive particles (WIMPs) with an exposure of 60~live days using a fiducial mass of 5.5 t. A profile-likelihood ratio analysis s… ▽ More The LUX-ZEPLIN experiment is a dark matter detector centered on a dual-phase xenon time projection chamber operating at the Sanford Underground Research Facility in Lead, South Dakota, USA. This Letter reports results from LUX-ZEPLIN's first search for weakly interacting massive particles (WIMPs) with an exposure of 60~live days using a fiducial mass of 5.5 t. A profile-likelihood ratio analysis shows the data to be consistent with a background-only hypothesis, setting new limits on spin-independent WIMP-nucleon, spin-dependent WIMP-neutron, and spin-dependent WIMP-proton cross sections for WIMP masses above 9 GeV/c$^2$. The most stringent limit is set for spin-independent scattering at 36 GeV/c$^2$, rejecting cross sections above 9.2$\times 10^{-48}$ cm$^2$ at the 90% confidence level. △ Less

Submitted 2 August, 2023; v1 submitted 8 July, 2022; originally announced July 2022.

Comments: 9 pages, 8 figures. See https://doi.org/10.1103/PhysRevLett.131.041002 for a data release related to this paper

Journal ref: Phys. Rev. Lett. 131, 041002 (2023)

Measuring the stability of fundamental constants with a network of clocks

Authors: G. Barontini, L. Blackburn, V. Boyer, F. Butuc-Mayer, X. Calmet, J. R. Crespo Lopez-Urrutia, E. A. Curtis, B. Darquie, J. Dunningham, N. J. Fitch, E. M. Forgan, K. Georgiou, P. Gill, R. M. Godun, J. Goldwin, V. Guarrera, A. C. Harwood, I. R. Hill, R. J. Hendricks, M. Jeong, M. Y. H. Johnson, M. Keller, L. P. Kozhiparambil Sajith, F. Kuipers, H. S. Margolis , et al. (19 additional authors not shown)

Abstract: The detection of variations of fundamental constants of the Standard Model would provide us with compelling evidence of new physics, and could lift the veil on the nature of dark matter and dark energy. In this work, we discuss how a network of atomic and molecular clocks can be used to look for such variations with unprecedented sensitivity over a wide range of time scales. This is precisely the… ▽ More The detection of variations of fundamental constants of the Standard Model would provide us with compelling evidence of new physics, and could lift the veil on the nature of dark matter and dark energy. In this work, we discuss how a network of atomic and molecular clocks can be used to look for such variations with unprecedented sensitivity over a wide range of time scales. This is precisely the goal of the recently launched QSNET project: A network of clocks for measuring the stability of fundamental constants. QSNET will include state-of-the-art atomic clocks, but will also develop next-generation molecular and highly charged ion clocks with enhanced sensitivity to variations of fundamental constants. We describe the technological and scientific aims of QSNET and evaluate its expected performance. We show that in the range of parameters probed by QSNET, either we will discover new physics, or we will impose new constraints on violations of fundamental symmetries and a range of theories beyond the Standard Model, including dark matter and dark energy models. △ Less

Submitted 11 May, 2022; v1 submitted 20 December, 2021; originally announced December 2021.

Journal ref: EPJ Quantum Technology volume 9, Article number: 12 (2022)

QSNET, a network of clocks for measuring the stability of fundamental constants

Authors: G. Barontini, V. Boyer, X. Calmet, N. J. Fitch, E. M. Forgan, R. M. Godun, J. Goldwin, V. Guarrera, I. R. Hill, M. Jeong, M. Keller, F. Kuipers, H. S. Margolis, P. Newman, L. Prokhorov, J. Rodewald, B. E. Sauer, M. Schioppo, N. Sherrill, M. R. Tarbutt, A. Vecchio, S. Worm

Abstract: The QSNET consortium is building a UK network of next-generation atomic and molecular clocks that will achieve unprecedented sensitivity in testing variations of the fine structure constant, $α$, and the electron-to-proton mass ratio, $μ$. This in turn will provide more stringent constraints on a wide range of fundamental and phenomenological theories beyond the Standard Model and on dark matter m… ▽ More The QSNET consortium is building a UK network of next-generation atomic and molecular clocks that will achieve unprecedented sensitivity in testing variations of the fine structure constant, $α$, and the electron-to-proton mass ratio, $μ$. This in turn will provide more stringent constraints on a wide range of fundamental and phenomenological theories beyond the Standard Model and on dark matter models. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Journal ref: Proc. SPIE 11881, Quantum Technology: Driving Commercialisation of an Enabling Science II, 118810K (2021)

Sensor characterization for the ULTRASAT space telescope

Authors: Benjamin Bastian-Querner, Nirmal Kaipachery, Daniel Küsters, Julian Schliwinski, Shay Alfassi, Arooj Asif, Merlin F. Barschke, Sagi Ben-Ami, David Berge, Adi Birman, Rolf Bühler, Nicola De Simone, Amos Fenigstein, Avishay Gal-Yam, Gianluca Giavitto, Juan M. Haces Crespo, Dmitri Ivanov, Omer Katz, Marek Kowalski, Shrinivasrao R. Kulkarni, Ofer Lapid, Tuvia Liran, Ehud Netzer, Eran O. Ofek, Sebastian Philipp , et al. (9 additional authors not shown)

Abstract: The Ultraviolet Transient Astronomical Satellite is a scientific space mission carrying an astronomical telescope. The mission is led by the Weizmann Institute of Science in Israel and the Israel Space Agency, while the camera in the focal plane is designed and built by Deutsches Elektronen Synchrotron in Germany. Two key science goals of the mission are the detection of counterparts to gravitatio… ▽ More The Ultraviolet Transient Astronomical Satellite is a scientific space mission carrying an astronomical telescope. The mission is led by the Weizmann Institute of Science in Israel and the Israel Space Agency, while the camera in the focal plane is designed and built by Deutsches Elektronen Synchrotron in Germany. Two key science goals of the mission are the detection of counterparts to gravitational wave sources and supernovae. The launch to geostationary orbit is planned for 2024. The telescope with a field-of-view of $\approx200$deg$^2$, is optimized to work in the near-ultraviolet band between $220$ and $280$nm. The focal plane array is composed of four $22.4$-megapixel, backside-illuminated CMOS sensors with a total active area of 90x90mm$^2$. Prior to sensor production, smaller test sensors have been tested to support critical design decisions for the final flight sensor. These test sensors share the design of epitaxial layer and anti-reflective coatings (ARC) with the flight sensors. Here, we present a characterization of these test sensors. Dark current and read noise are characterized as a function of the device temperature. A temperature-independent noise level is attributed to on-die infrared emission and the read-out electronics` self-heating. We utilize a high-precision photometric calibration setup to obtain the test sensors` quantum efficiency (QE) relative to PTB/NIST-calibrated transfer standards ($220$-$1100$nm), the quantum yield for $λ< 300$nm, the non-linearity of the system, and the conversion gain. The uncertainties are discussed in the context of the newest results on the setup`s performance parameters. From three ARC options, Tstd, T1 and T2, the latter optimizes out-of-band rejection and peaks in the mid of the ULTRASAT operational waveband (max. QE $\approx80\%$ at $245\mathrm{nm}$). We recommend ARC option T2 for the final ULTRASAT UV sensor. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Design of the ULTRASAT UV camera

Authors: Arooj Asif, Merlin Barschke, Benjamin Bastian-Querner, David Berge, Rolf Bühler, Nicola De Simone, Gianluca Giavitto, Juan M. Haces Crespo, Nirmal Kaipachery, Marek Kowalski, Shrinivasrao R. Kulkarni, Daniel Küsters, Sebastian Philipp, Heike Prokoph, Julian Schliwinski, Mikhail Vasilev, Jason J. Watson, Steven Worm, Francesco Zappon, Shay Alfassi, Sagi Ben-Ami, Adi Birman, Kasey Boggs, Greg Bredthauer, Amos Fenigstein , et al. (12 additional authors not shown)

Abstract: The Ultraviolet Transient Astronomical Satellite (ULTRASAT) is a scientific UV space telescope that will operate in geostationary orbit. The mission, targeted to launch in 2024, is led by the Weizmann Institute of Science (WIS) in Israel and the Israel Space Agency (ISA). Deutsches Elektronen Synchrotron (DESY) in Germany is tasked with the development of the UV-sensitive camera at the heart of th… ▽ More The Ultraviolet Transient Astronomical Satellite (ULTRASAT) is a scientific UV space telescope that will operate in geostationary orbit. The mission, targeted to launch in 2024, is led by the Weizmann Institute of Science (WIS) in Israel and the Israel Space Agency (ISA). Deutsches Elektronen Synchrotron (DESY) in Germany is tasked with the development of the UV-sensitive camera at the heart of the telescope. The camera's total sensitive area of ~90mm x 90mm is built up by four back-side illuminated CMOS sensors, which image a field of view of ~200 deg2. Each sensor has 22.4 megapixels. The Schmidt design of the telescope locates the detector inside the optical path, limiting the overall size of the assembly. As a result, the readout electronics is located in a remote unit outside the telescope. The short focal length of the telescope requires an accurate positioning of the sensors within +-50 mu along the optical axis, with a flatness of +-10 mu. While the telescope will be at around 295K during operations, the sensors are required to be cooled to 200K for dark current reduction. At the same time, the ability to heat the sensors to 343K is required for decontamination. In this paper, we present the preliminary design of the UV sensitive ULTRASAT camera. △ Less

Submitted 3 August, 2021; originally announced August 2021.

Comments: "UV, X-Ray, and Gamma-Ray Space Instrumentation for Astronomy XXII", Proc. SPIE 11821, Optics and Photonics, 11821-21 (August, 2021). Contact authors Rolf Buehler ([email protected]) and Merlin Barschke ([email protected])

The ABC130 barrel module prototyping programme for the ATLAS strip tracker

Authors: Luise Poley, Craig Sawyer, Sagar Addepalli, Anthony Affolder, Bruno Allongue, Phil Allport, Eric Anderssen, Francis Anghinolfi, Jean-François Arguin, Jan-Hendrik Arling, Olivier Arnaez, Nedaa Alexandra Asbah, Joe Ashby, Eleni Myrto Asimakopoulou, Naim Bora Atlay, Ludwig Bartsch, Matthew J. Basso, James Beacham, Scott L. Beaupré, Graham Beck, Carl Beichert, Laura Bergsten, Jose Bernabeu, Prajita Bhattarai, Ingo Bloch , et al. (224 additional authors not shown)

Abstract: For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000… ▽ More For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests. △ Less

Submitted 7 September, 2020; originally announced September 2020.

Comments: 82 pages, 66 figures

Journal ref: published 3 September 2020, Journal of Instrumentation, Volume 15, September 2020

The LUX-ZEPLIN (LZ) radioactivity and cleanliness control programs

Authors: D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, A. Alquahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, A. Arbuckle, J. E. Armstrong, M. Arthurs, H. Auyeung, S. Aviles, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, J. Bang, M. J. Barry, D. Bauer, P. Bauer, A. Baxter, J. Belle, P. Beltrame, J. Bensinger , et al. (365 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherent… ▽ More LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherently low radioactivity content. The LZ collaboration performed an extensive radioassay campaign over a period of six years to inform material selection for construction and provide an input to the experimental background model against which any possible signal excess may be evaluated. The campaign and its results are described in this paper. We present assays of dust and radon daughters depositing on the surface of components as well as cleanliness controls necessary to maintain background expectations through detector construction and assembly. Finally, examples from the campaign to highlight fixed contaminant radioassays for the LZ photomultiplier tubes, quality control and quality assurance procedures through fabrication, radon emanation measurements of major sub-systems, and bespoke detector systems to assay scintillator are presented. △ Less

Submitted 28 February, 2022; v1 submitted 3 June, 2020; originally announced June 2020.

Comments: 45 pages (79 inc. tables), 7 figures, 9 tables

Journal ref: The European Physical Journal C, Volume 80, Article number: 1044 (2020)

The LUX-ZEPLIN (LZ) Experiment

Authors: The LZ Collaboration, D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, A. Alquahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, A. Arbuckle, J. E. Armstrong, M. Arthurs, H. Auyeung, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, J. Bang, M. J. Barry, J. Barthel, D. Bauer, P. Bauer, A. Baxter, J. Belle, P. Beltrame , et al. (357 additional authors not shown)

Abstract: We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient n… ▽ More We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient neutron capture and tagging. LZ is located in the Davis Cavern at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. We describe the major subsystems of the experiment and its key design features and requirements. △ Less

Submitted 3 November, 2019; v1 submitted 20 October, 2019; originally announced October 2019.

Mini-MALTA: Radiation hard pixel designs for small-electrode monolithic CMOS sensors for the High Luminosity LHC

Authors: M. Dyndal, V. Dao, P. Allport, I. Asensi Tortajada, M. Barbero, S. Bhat, D. Bortoletto, I. Berdalovic, C. Bespin, C. Buttar, I. Caicedo, R. Cardella, F. Dachs, Y. Degerli, H. Denizli, L. Flores Sanz de Acedo, P. Freeman, L. Gonella, A. Habib, T. Hemperek, T. Hirono, B. Hiti, T. Kugathasan, I. Mandić, D. Maneuski , et al. (19 additional authors not shown)

Abstract: Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silico… ▽ More Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silicon. The design targets a radiation hardness of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$, compatible with the outermost layer of the ATLAS ITK Pixel detector. This paper presents the results from characterization in particle beam tests of the Mini-MALTA prototype that implements a mask change or an additional implant to address the inefficiencies on the pixel edges. Results show full efficiency after a dose of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. △ Less

Submitted 14 December, 2019; v1 submitted 26 September, 2019; originally announced September 2019.

Measurement of the relative response of TowerJazz Mini-MALTA CMOS prototypes at Diamond Light Source

Authors: Maria Mironova, Kaloyan Metodiev, Phil Allport, Ivan Berdalovic, Daniela Bortoletto, Craig Buttar, Roberto Cardella, Valerio Dao, Mateusz Dyndal, Patrick Freeman, Leyre Flores Sanz de Acedo, Laura Gonella, Thanushan Kugathasan, Heinz Pernegger, Francesco Piro, Richard Plackett, Petra Riedler, Abhishek Sharma, Enrico Junior Schioppa, Ian Shipsey, Carlos Solans Sanchez, Walter Snoeys, Hakan Wennloef, Daniel Weatherill, Daniel Wood , et al. (1 additional authors not shown)

Abstract: This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were co… ▽ More This paper outlines the results of investigations into the effects of radiation damage in the mini-MALTA prototype. Measurements were carried out at Diamond Light Source using a micro-focus X-ray beam, which scanned across the surface of the device in 2 $\mathrm{μm}$ steps. This allowed the in-pixel photon response to be measured directly with high statistics. Three pixel design variations were considered: one with the standard continuous $\mathrm{n^-}$ layer layout and front-end, and extra deep p-well and $\mathrm{n^-}$ gap designs with a modified front-end. Five chips were measured: one unirradiated, one neutron irradiated, and three proton irradiated. △ Less

Submitted 2 October, 2019; v1 submitted 18 September, 2019; originally announced September 2019.

Projected WIMP sensitivity of the LUX-ZEPLIN (LZ) dark matter experiment

Authors: D. S. Akerib, C. W. Akerlof, S. K. Alsum, H. M. Araújo, M. Arthurs, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, D. Bauer, J. Belle, P. Beltrame, T. Benson, E. P. Bernard, T. P. Biesiadzinski, K. E. Boast, B. Boxer, P. Brás, J. H. Buckley, V. V. Bugaev, S. Burdin, J. K. Busenitz, C. Carels, D. L. Carlsmith, B. Carlson , et al. (153 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a next generation dark matter direct detection experiment that will operate 4850 feet underground at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. Using a two-phase xenon detector with an active mass of 7~tonnes, LZ will search primarily for low-energy interactions with Weakly Interacting Massive Particles (WIMPs), which are hypothesized to make up… ▽ More LUX-ZEPLIN (LZ) is a next generation dark matter direct detection experiment that will operate 4850 feet underground at the Sanford Underground Research Facility (SURF) in Lead, South Dakota, USA. Using a two-phase xenon detector with an active mass of 7~tonnes, LZ will search primarily for low-energy interactions with Weakly Interacting Massive Particles (WIMPs), which are hypothesized to make up the dark matter in our galactic halo. In this paper, the projected WIMP sensitivity of LZ is presented based on the latest background estimates and simulations of the detector. For a 1000~live day run using a 5.6~tonne fiducial mass, LZ is projected to exclude at 90\% confidence level spin-independent WIMP-nucleon cross sections above $1.4 \times 10^{-48}$~cm$^{2}$ for a 40~$\mathrm{GeV}/c^{2}$ mass WIMP. Additionally, a $5σ$ discovery potential is projected reaching cross sections below the exclusion limits of recent experiments. For spin-dependent WIMP-neutron(-proton) scattering, a sensitivity of $2.3 \times 10^{-43}$~cm$^{2}$ ($7.1 \times 10^{-42}$~cm$^{2}$) for a 40~$\mathrm{GeV}/c^{2}$ mass WIMP is expected. With underground installation well underway, LZ is on track for commissioning at SURF in 2020. △ Less

Submitted 2 December, 2019; v1 submitted 16 February, 2018; originally announced February 2018.

Comments: 14 pages, 11 figures

Journal ref: Phys. Rev. D 101, 052002 (2020)

LUX-ZEPLIN (LZ) Technical Design Report

Authors: B. J. Mount, S. Hans, R. Rosero, M. Yeh, C. Chan, R. J. Gaitskell, D. Q. Huang, J. Makkinje, D. C. Malling, M. Pangilinan, C. A. Rhyne, W. C. Taylor, J. R. Verbus, Y. D. Kim, H. S. Lee, J. Lee, D. S. Leonard, J. Li, J. Belle, A. Cottle, W. H. Lippincott, D. J. Markley, T. J. Martin, M. Sarychev, T. E. Tope , et al. (237 additional authors not shown)

Abstract: In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters. In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters. △ Less

Submitted 27 March, 2017; originally announced March 2017.

Comments: 392 pages. Submitted to the Department of Energy as part of the documentation for the Critical Decision Numbers Two and Three (CD-2 and CD-3) management processes. Report also available by chapter at <a href="http://hep.ucsb.edu/LZ/TDR/">this URL</a>

Report number: LBNL-1007256

Identification of Radiopure Titanium for the LZ Dark Matter Experiment and Future Rare Event Searches

Authors: D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, S. K. Alsum, H. M. Araújo, I. J. Arnquist, M. Arthurs, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, M. J. Barry, J. Belle, P. Beltrame, T. Benson, E. P. Bernard, A. Bernstein, T. P. Biesiadzinski, K. E. Boast, A. Bolozdynya, B. Boxer, R. Bramante, P. Brás, J. H. Buckley, V. V. Bugaev , et al. (180 additional authors not shown)

Abstract: The LUX-ZEPLIN (LZ) experiment will search for dark matter particle interactions with a detector containing a total of 10 tonnes of liquid xenon within a double-vessel cryostat. The large mass and proximity of the cryostat to the active detector volume demand the use of material with extremely low intrinsic radioactivity. We report on the radioassay campaign conducted to identify suitable metals,… ▽ More The LUX-ZEPLIN (LZ) experiment will search for dark matter particle interactions with a detector containing a total of 10 tonnes of liquid xenon within a double-vessel cryostat. The large mass and proximity of the cryostat to the active detector volume demand the use of material with extremely low intrinsic radioactivity. We report on the radioassay campaign conducted to identify suitable metals, the determination of factors limiting radiopure production, and the selection of titanium for construction of the LZ cryostat and other detector components. This titanium has been measured with activities of $^{238}$U$_{e}$~$<$1.6~mBq/kg, $^{238}$U$_{l}$~$<$0.09~mBq/kg, $^{232}$Th$_{e}$~$=0.28\pm 0.03$~mBq/kg, $^{232}$Th$_{l}$~$=0.25\pm 0.02$~mBq/kg, $^{40}$K~$<$0.54~mBq/kg, and $^{60}$Co~$<$0.02~mBq/kg (68\% CL). Such low intrinsic activities, which are some of the lowest ever reported for titanium, enable its use for future dark matter and other rare event searches. Monte Carlo simulations have been performed to assess the expected background contribution from the LZ cryostat with this radioactivity. In 1,000 days of WIMP search exposure of a 5.6-tonne fiducial mass, the cryostat will contribute only a mean background of $0.160\pm0.001$(stat)$\pm0.030$(sys) counts. △ Less

Submitted 26 September, 2017; v1 submitted 8 February, 2017; originally announced February 2017.

Comments: 13 pages, 3 figures, accepted for publication in Astroparticle Physics

Recommendations on presenting LHC searches for missing transverse energy signals using simplified $s$-channel models of dark matter

Authors: Antonio Boveia, Oliver Buchmueller, Giorgio Busoni, Francesco D'Eramo, Albert De Roeck, Andrea De Simone, Caterina Doglioni, Matthew J. Dolan, Marie-Helene Genest, Kristian Hahn, Ulrich Haisch, Philip C. Harris, Jan Heisig, Valerio Ippolito, Felix Kahlhoefer, Valentin V. Khoze, Suchita Kulkarni, Greg Landsberg, Steven Lowette, Sarah Malik, Michelangelo Mangano, Christopher McCabe, Stephen Mrenna, Priscilla Pani, Tristan du Pree , et al. (8 additional authors not shown)

Abstract: This document summarises the proposal of the LHC Dark Matter Working Group on how to present LHC results on $s$-channel simplified dark matter models and to compare them to direct (indirect) detection experiments. This document summarises the proposal of the LHC Dark Matter Working Group on how to present LHC results on $s$-channel simplified dark matter models and to compare them to direct (indirect) detection experiments. △ Less

Submitted 14 March, 2016; originally announced March 2016.

Comments: LHC Dark Matter Working Group document, 21pages, 4 figures

Report number: CERN-LPCC-2016-001

Conjugate gradient acceleration of iteratively re-weighted least squares methods

Authors: Massimo Fornasier, Steffen Peter, Holger Rauhut, Stephan Worm

Abstract: Iteratively Re-weighted Least Squares (IRLS) is a method for solving minimization problems involving non-quadratic cost functions, perhaps non-convex and non-smooth, which however can be described as the infimum over a family of quadratic functions. This transformation suggests an algorithmic scheme that solves a sequence of quadratic problems to be tackled efficiently by tools of numerical linear… ▽ More Iteratively Re-weighted Least Squares (IRLS) is a method for solving minimization problems involving non-quadratic cost functions, perhaps non-convex and non-smooth, which however can be described as the infimum over a family of quadratic functions. This transformation suggests an algorithmic scheme that solves a sequence of quadratic problems to be tackled efficiently by tools of numerical linear algebra. Its general scope and its usually simple implementation, transforming the initial non-convex and non-smooth minimization problem into a more familiar and easily solvable quadratic optimization problem, make it a versatile algorithm. However, despite its simplicity, versatility, and elegant analysis, the complexity of IRLS strongly depends on the way the solution of the successive quadratic optimizations is addressed. For the important special case of $\textit{compressed sensing}$ and sparse recovery problems in signal processing, we investigate theoretically and numerically how accurately one needs to solve the quadratic problems by means of the $\textit{conjugate gradient}$ (CG) method in each iteration in order to guarantee convergence. The use of the CG method may significantly speed-up the numerical solution of the quadratic subproblems, in particular, when fast matrix-vector multiplication (exploiting for instance the FFT) is available for the matrix involved. In addition, we study convergence rates. Our modified IRLS method outperforms state of the art first order methods such as Iterative Hard Thresholding (IHT) or Fast Iterative Soft-Thresholding Algorithm (FISTA) in many situations, especially in large dimensions. Moreover, IRLS is often able to recover sparse vectors from fewer measurements than required for IHT and FISTA. △ Less

Submitted 23 February, 2016; v1 submitted 14 September, 2015; originally announced September 2015.

Comments: 40 pages

LUX-ZEPLIN (LZ) Conceptual Design Report

Authors: The LZ Collaboration, D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, S. K. Alsum, H. M. Araújo, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, M. J. Barry, P. Bauer, P. Beltrame, E. P. Bernard, A. Bernstein, T. P. Biesiadzinski, K. E. Boast, A. I. Bolozdynya, E. M. Boulton, R. Bramante, J. H. Buckley, V. V. Bugaev, R. Bunker, S. Burdin, J. K. Busenitz , et al. (170 additional authors not shown)

Abstract: The design and performance of the LUX-ZEPLIN (LZ) detector is described as of March 2015 in this Conceptual Design Report. LZ is a second-generation dark-matter detector with the potential for unprecedented sensitivity to weakly interacting massive particles (WIMPs) of masses from a few GeV/c2 to hundreds of TeV/c2. With total liquid xenon mass of about 10 tonnes, LZ will be the most sensitive exp… ▽ More The design and performance of the LUX-ZEPLIN (LZ) detector is described as of March 2015 in this Conceptual Design Report. LZ is a second-generation dark-matter detector with the potential for unprecedented sensitivity to weakly interacting massive particles (WIMPs) of masses from a few GeV/c2 to hundreds of TeV/c2. With total liquid xenon mass of about 10 tonnes, LZ will be the most sensitive experiment for WIMPs in this mass region by the end of the decade. This report describes in detail the design of the LZ technical systems. Expected backgrounds are quantified and the performance of the experiment is presented. The LZ detector will be located at the Sanford Underground Research Facility in South Dakota. The organization of the LZ Project and a summary of the expected cost and current schedule are given. △ Less

Submitted 23 September, 2015; v1 submitted 9 September, 2015; originally announced September 2015.

Comments: 278 pages. Submitted to the Department of Energy as part of the documentation for the Critical Decision Number One (CD-1) management process. Report also available by chapter at http://hep.ucsb.edu/LZ/CDR. This version includes corrections of minor typographic errors

Report number: LBNL-190005

Dark Matter Benchmark Models for Early LHC Run-2 Searches: Report of the ATLAS/CMS Dark Matter Forum

Authors: Daniel Abercrombie, Nural Akchurin, Ece Akilli, Juan Alcaraz Maestre, Brandon Allen, Barbara Alvarez Gonzalez, Jeremy Andrea, Alexandre Arbey, Georges Azuelos, Patrizia Azzi, Mihailo Backović, Yang Bai, Swagato Banerjee, James Beacham, Alexander Belyaev, Antonio Boveia, Amelia Jean Brennan, Oliver Buchmueller, Matthew R. Buckley, Giorgio Busoni, Michael Buttignol, Giacomo Cacciapaglia, Regina Caputo, Linda Carpenter, Nuno Filipe Castro , et al. (114 additional authors not shown)

Abstract: This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of t… ▽ More This document is the final report of the ATLAS-CMS Dark Matter Forum, a forum organized by the ATLAS and CMS collaborations with the participation of experts on theories of Dark Matter, to select a minimal basis set of dark matter simplified models that should support the design of the early LHC Run-2 searches. A prioritized, compact set of benchmark models is proposed, accompanied by studies of the parameter space of these models and a repository of generator implementations. This report also addresses how to apply the Effective Field Theory formalism for collider searches and present the results of such interpretations. △ Less

Submitted 3 July, 2015; originally announced July 2015.

Journal ref: Phys. Dark Univ. 26 (2019) 100371

Simplified Models for Dark Matter Searches at the LHC

Authors: Jalal Abdallah, Henrique Araujo, Alexandre Arbey, Adi Ashkenazi, Alexander Belyaev, Joshua Berger, Celine Boehm, Antonio Boveia, Amelia Brennan, Jim Brooke, Oliver Buchmueller, Matthew Buckley, Giorgio Busoni, Lorenzo Calibbi, Sushil Chauhan, Nadir Daci, Gavin Davies, Isabelle De Bruyn, Paul De Jong, Albert De Roeck, Kees de Vries, Daniele Del Re, Andrea De Simone, Andrea Di Simone, Caterina Doglioni , et al. (72 additional authors not shown)

Abstract: This document outlines a set of simplified models for dark matter and its interactions with Standard Model particles. It is intended to summarize the main characteristics that these simplified models have when applied to dark matter searches at the LHC, and to provide a number of useful expressions for reference. The list of models includes both s-channel and t-channel scenarios. For s-channel, sp… ▽ More This document outlines a set of simplified models for dark matter and its interactions with Standard Model particles. It is intended to summarize the main characteristics that these simplified models have when applied to dark matter searches at the LHC, and to provide a number of useful expressions for reference. The list of models includes both s-channel and t-channel scenarios. For s-channel, spin-0 and spin-1 mediation is discussed, and also realizations where the Higgs particle provides a portal between the dark and visible sectors. The guiding principles underpinning the proposed simplified models are spelled out, and some suggestions for implementation are presented. △ Less

Submitted 23 March, 2016; v1 submitted 9 June, 2015; originally announced June 2015.

Comments: v3: Fixed typo in eqns 14 & 15

Report number: CERN-PH-TH/2015-139, FERMILAB-PUB-15-283-CD

Journal ref: Phys. Dark Univ. 9-10 (2015) 8-23

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Interplay and Characterization of Dark Matter Searches at Colliders and in Direct Detection Experiments

Authors: Sarah A. Malik, Christopher McCabe, Henrique Araujo, Alexander Belyaev, Celine Boehm, Jim Brooke, Oliver Buchmueller, Gavin Davies, Albert De Roeck, Kees de Vries, Matthew J. Dolan, John Ellis, Malcolm Fairbairn, Henning Flaecher, Loukas Gouskos, Valentin V. Khoze, Greg Landsberg, Dave Newbold, Michele Papucci, Timothy Sumner, Marc Thomas, Steven Worm

Abstract: In this White Paper we present and discuss a concrete proposal for the consistent interpretation of Dark Matter searches at colliders and in direct detection experiments. Based on a specific implementation of simplified models of vector and axial-vector mediator exchanges, this proposal demonstrates how the two search strategies can be compared on an equal footing. In this White Paper we present and discuss a concrete proposal for the consistent interpretation of Dark Matter searches at colliders and in direct detection experiments. Based on a specific implementation of simplified models of vector and axial-vector mediator exchanges, this proposal demonstrates how the two search strategies can be compared on an equal footing. △ Less

Submitted 15 October, 2015; v1 submitted 14 September, 2014; originally announced September 2014.

Comments: White Paper from the Brainstorming Workshop held at Imperial College London on May 29th, 2014

Report number: KCL-PH-TH/2014-37, LCTS/2014-36, CERN-PH-TH/2014-180

Operational experience, improvements, and performance of the CDF Run II silicon vertex detector

Authors: T. Aaltonen, S. Behari, A. Boveia, B. Brau, G. Bolla, D. Bortoletto, C. Calancha, S. Carron, S. Cihangir, M. Corbo, D. Clark, B. Di Ruzza, R. Eusebi, J. P. Fernandez, J. C. Freeman, J. E. Garcia, M. Garcia-Sciveres, D. Glenzinski, O. Gonzalez, S. Grinstein, M. Hartz, M. Herndon, C. Hill, A. Hocker, U. Husemann , et al. (35 additional authors not shown)

Abstract: The Collider Detector at Fermilab (CDF) pursues a broad physics program at Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and the end of operations in September 2011, the Tevatron delivered 12 fb-1 of integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics analyses undertaken by CDF require heavy flavor tagging with large charged particle tracking acc… ▽ More The Collider Detector at Fermilab (CDF) pursues a broad physics program at Fermilab's Tevatron collider. Between Run II commissioning in early 2001 and the end of operations in September 2011, the Tevatron delivered 12 fb-1 of integrated luminosity of p-pbar collisions at sqrt(s)=1.96 TeV. Many physics analyses undertaken by CDF require heavy flavor tagging with large charged particle tracking acceptance. To realize these goals, in 2001 CDF installed eight layers of silicon microstrip detectors around its interaction region. These detectors were designed for 2--5 years of operation, radiation doses up to 2 Mrad (0.02 Gy), and were expected to be replaced in 2004. The sensors were not replaced, and the Tevatron run was extended for several years beyond its design, exposing the sensors and electronics to much higher radiation doses than anticipated. In this paper we describe the operational challenges encountered over the past 10 years of running the CDF silicon detectors, the preventive measures undertaken, and the improvements made along the way to ensure their optimal performance for collecting high quality physics data. In addition, we describe the quantities and methods used to monitor radiation damage in the sensors for optimal performance and summarize the detector performance quantities important to CDF's physics program, including vertex resolution, heavy flavor tagging, and silicon vertex trigger performance. △ Less

Submitted 3 October, 2013; v1 submitted 14 January, 2013; originally announced January 2013.

Comments: Preprint accepted for publication in Nuclear Instruments and Methods A (07/31/2013)

Report number: FERMILAB-PUB-13-015-E

Journal ref: Nuclear Instruments and Methods in Physics Research, A 729 (2013) 153-181

Comparison of Measurements of Charge Transfer Inefficiencies in a CCD with High-Speed Column Parallel Readout

Authors: Andre Sopczak, Salim Aoulmit, Khaled Bekhouche, Chris Bowdery, Craig Buttar, Chris Damerell, Dahmane Djendaoui, Lakhdar Dehimi, Rui Gao, Tim Greenshaw, Michal Koziel, Dzmitry Maneuski, Andrei Nomerotski, Nouredine Sengouga, Konstantin Stefanov, Tuomo Tikkanen, Tim Woolliscroft, Steve Worm, Zhige Zhang

Abstract: Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) Collaboration has been developing Column-Parallel CCDs for the vertex detector of a future Linear Co… ▽ More Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) Collaboration has been developing Column-Parallel CCDs for the vertex detector of a future Linear Collider which can be read out many times faster than standard CCDs. The most recent studies are of devices designed to reduce both the CCD's intergate capacitance and the clock voltages necessary to drive it. A comparative study of measured Charge Transfer Inefficiency values between our previous and new results for a range of operating temperatures is presented. △ Less

Submitted 30 November, 2009; originally announced November 2009.

Comments: 6 pages, 10 figures, presented at IEEE'09 and ICATPP'09 on behalf of the LCFI Collaboration

The LCFIVertex package: vertexing, flavour tagging and vertex charge reconstruction with an ILC vertex detector

Authors: LCFI Collaboration, David Bailey, Erik Devetak, Mark Grimes, Kristian Harder, Sonja Hillert, David Jackson, Talini Pinto Jayawardena, Ben Jeffery, Tomas Lastovicka, Clare Lynch, Victoria Martin, Roberval Walsh, Phil Allport, Yambazi Banda, Craig Buttar, Alexandre Cheplakov, David Cussans, Chris Damerell, Nicolo de Groot, Johan Fopma, Brian Foster, Senerath Galagedera, Rui Gao, Anthony Gillman , et al. (36 additional authors not shown)

Abstract: The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and… ▽ More The precision measurements envisaged at the International Linear Collider (ILC) depend on excellent instrumentation and reconstruction software. The correct identification of heavy flavour jets, placing unprecedented requirements on the quality of the vertex detector, will be central for the ILC programme. This paper describes the LCFIVertex software, which provides tools for vertex finding and for identification of the flavour and charge of the leading hadron in heavy flavour jets. These tools are essential for the ongoing optimisation of the vertex detector design for linear colliders such as the ILC. The paper describes the algorithms implemented in the LCFIVertex package, as well as the scope of the code and its performance for a typical vertex detector design. △ Less

Submitted 20 August, 2009; originally announced August 2009.

Comments: 40 pages, accepted by NIM A

Journal ref: Nucl.Instrum.Meth.A610:573-589,2009

Modeling of Charge Transfer Inefficiency in a CCD with High Speed Column Parallel Readout

Authors: Andre Sopczak, Salim Aoulmit, Khaled Bekhouche, Chris Bowdery, Craig Buttar, Chris Damerell, Dahmane Djendaoui, Lakhdar Dehimi, Tim Greenshaw, Michal Koziel, Dzmitry Maneuski, Andrei Nomerotski, Konstantin Stefanov, Tuomo Tikkanen, Tim Woolliscroft, Steve Worm

Abstract: Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) collaboration is developing Column-Parallel CCDs (CPCCDs) for the vertex detector of a future Linear… ▽ More Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) collaboration is developing Column-Parallel CCDs (CPCCDs) for the vertex detector of a future Linear Collider. The CPCCDs can be read out many times faster than standard CCDs, significantly increasing their operating speed. An Analytic Model has been developed for the determination of the charge transfer inefficiency (CTI) of a CPCCD. The CTI values determined with the Analytic Model agree largely with those from a full TCAD simulation. The Analytic Model allows efficient study of the variation of the CTI on parameters like readout frequency, operating temperature and occupancy. △ Less

Submitted 17 November, 2008; originally announced November 2008.

Comments: 5 pages, 13 figures, presented on behalf of the LCFI Collaboration, proceedings IEEE 2008 Nuclear Science Symposium, Dresden, Germany, and 11th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD08) 2008, Siena, Italy

Journal ref: IEEE Trans.Nucl.Sci.56:1613-1617,2009; Nucl.Phys.Proc.Suppl.197:349-352,2009

Measurements of Charge Transfer Inefficiency in a CCD with High-Speed Column Parallel Readout

Authors: Andre Sopczak, Khaled Bekhouche, Chris Damerell, Tim Greenshaw, Michal Koziel, Konstantin Stefanov, Tuomo Tikkanen, Tim Woolliscroft, Steve Worm

Abstract: Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) collaboration is developing Column-Parallel CCDs (CPCCDs) for the vertex detector of a future Linear… ▽ More Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived particles. The Linear Collider Flavour Identification (LCFI) collaboration is developing Column-Parallel CCDs (CPCCDs) for the vertex detector of a future Linear Collider. The CPCCDs can be read out many times faster than standard CCDs, significantly increasing their operating speed. A test stand for measuring the charge transfer inefficiency (CTI) of a prototype CPCCD has been set up. Studies of the CTI have been performed at a range of readout frequencies and operating temperatures. △ Less

Submitted 15 November, 2008; originally announced November 2008.

Comments: 6 pages, 17 figures, presented on behalf of the LCFI Collaboration, proceedings IEEE 2008 Nuclear Science Symposium, Dresden, Germany

Journal ref: IEEE Trans.Nucl.Sci.56:2925-2930,2009

Radiation Hardness of CCD Vertex Detectors for the ILC

Authors: Andre Sopczak, Khaled Bekhouche, Chris Bowdery, Chris Damerell, Gavin Davies, Lakhdar Dehimi, Tim Greenshaw, Michal Koziel, Konstantin Stefanov, Tim Woolliscroft, Steve Worm

Abstract: Results of detailed simulations of the charge transfer inefficiency of a prototype CCD chip are reported. The effect of radiation damage in a particle detector operating at a future accelerator is studied by examining two electron trap levels, 0.17 eV and 0.44 eV below the bottom of the conduction band. Good agreement is found between simulations using the ISE-TCAD DESSIS program and an analytic… ▽ More Results of detailed simulations of the charge transfer inefficiency of a prototype CCD chip are reported. The effect of radiation damage in a particle detector operating at a future accelerator is studied by examining two electron trap levels, 0.17 eV and 0.44 eV below the bottom of the conduction band. Good agreement is found between simulations using the ISE-TCAD DESSIS program and an analytical model for the 0.17 eV level. Optimum operation is predicted to be at about 250 K where the effect of the traps is minimal which is approximately independent of readout frequency. This work has been carried out within the Linear Collider Flavour Identification (LCFI) collaboration in the context of the International Linear Collider (ILC) project. △ Less

Submitted 28 November, 2006; originally announced November 2006.

Comments: 7 pages, 10 figures. Presented at the IEEE 2006 Nuclear Science Symposium, San Diego, USA, and the 10th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD06), 2006, Siena, Italy

Search for First-Generation Scalar Leptoquarks in $\bm{p \bar{p}}$ collisions at $\sqrt{s}$=1.96 TeV

Authors: The CDF Collaboration, D. Acosta, J. Adelman, T. Affolder, T. Akimoto, M. G. Albrow, D. Ambrose, S. Amerio, D. Amidei, A. Anastassov, K. Anikeev, A. Annovi, J. Antos, M. Aoki, G. Apollinari, T. Arisawa, J-F. Arguin, A. Artikov, W. Ashmanskas, A. Attal, F. Azfar, P. Azzi-Bacchetta, N. Bacchetta, H. Bachacou, W. Badgett , et al. (605 additional authors not shown)

Abstract: We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L.… ▽ More We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L. upper limits on the $LQ$ production cross section. %as a function of $β$, where $β$ is the branching fraction for $LQ \to eq$. The results are combined with those obtained from a separately reported CDF search in the topology arising from $LQ\bar{LQ} \to νq νq$ and 95% C.L. lower limits on the LQ mass as a function of $β= BR(LQ \to eq) $ are derived. The limits are 236, 205 and 145 GeV/c$^2$ for $β$ = 1, $β$ = 0.5 and $β$ = 0.1, respectively. △ Less

Submitted 29 June, 2005; originally announced June 2005.

Comments: submitted to PRL

Report number: FERMILAB-PUB-05-254-E

Journal ref: Phys.Rev.D72:051107,2005

Measurement of the radiation field surrounding the Collider Detector at Fermilab

Authors: Kostas Kordas, Saverio D'Auria, Andy Hocker, Susan McGimpsey, Ludovic Nicolas, Richard J. Tesarek, Steven Worm

Abstract: We present here the first direct and detailed measurements of the spatial distribution of the ionizing radiation surrounding a hadron collider experiment. Using data from two different exposures we measure the effect of additional shielding on the radiation field around the Collider Detector at Fermilab (CDF). Employing a simple model we parameterize the ionizing radiation field surrounding the… ▽ More We present here the first direct and detailed measurements of the spatial distribution of the ionizing radiation surrounding a hadron collider experiment. Using data from two different exposures we measure the effect of additional shielding on the radiation field around the Collider Detector at Fermilab (CDF). Employing a simple model we parameterize the ionizing radiation field surrounding the detector. △ Less

Submitted 23 January, 2004; originally announced January 2004.

Comments: PDF document, 5 pages, including 10 encapsulated postscript figures: Proceedings for the IEEE/NSS-MIC 2003 Conference, Portland, Oregon, October 19-25, 2003

Report number: FERMILAB-Conf-04/010-E

A straw drift chamber spectrometer for studies of rare kaon decays

Authors: K. Lang, D. Ambrose, C. Arroyo, M. Bachman, D. Connor, M. Eckhause, K. M. Ecklund, S. Graessle, M. Hamela, S. Hamilton, A. D. Hancock, K. Hartman, M. Hebert, C. H. Hoff, G. W. Hoffmann, G. M. Irwin, J. R. Kane, N. Kanematsu, Y. Kuang, R. Lee, M. Marcin, R. D. Martin, J. McDonough, A. Milder, W. R. Molzon , et al. (11 additional authors not shown)

Abstract: We describe the design, construction, readout, tests, and performance of planar drift chambers, based on 5 mm diameter copperized Mylar and Kapton straws, used in an experimental search for rare kaon decays. The experiment took place in the high-intensity neutral beam at the Alternating Gradient Synchrotron of Brookhaven National Laboratory, using a neutral beam stop, two analyzing dipoles, and… ▽ More We describe the design, construction, readout, tests, and performance of planar drift chambers, based on 5 mm diameter copperized Mylar and Kapton straws, used in an experimental search for rare kaon decays. The experiment took place in the high-intensity neutral beam at the Alternating Gradient Synchrotron of Brookhaven National Laboratory, using a neutral beam stop, two analyzing dipoles, and redundant particle identification to remove backgrounds. △ Less

Submitted 12 August, 2003; originally announced August 2003.

Journal ref: Nucl.Instrum.Meth. A522 (2004) 274-293

First Observation of the Rare Decay Mode K-long -> e+ e-

Authors: BNL E871 Collaboration, D. Ambrose, C. Arroyo, M. Bachman, P. de Cecco, D. Connor, M. Eckhause, K. M. Ecklund, S. Graessle, A. D. Hancock, K. Hartman, M. Hebert, C. H. Hoff, G. W. Hoffmann, G. M. Irwin, J. R. Kane, N. Kanematsu, Y. Kuang, K. Lang, R. Lee, R. D. Martin, J. McDonough, A. Milder, W. R. Molzon, M. Pommot-Maia , et al. (9 additional authors not shown)

Abstract: In an experiment designed to search for and study very rare two-body decay modes of the K-long, we have observed four examples of the decay K-long -> e+ e-, where the expected background is 0.17+-0.10 events. This observation translates into a branching fraction of 8.7^{+5.7}_{-4.1} X 10^{-12}, consistent with recent theoretical predictions. This result represents by far the smallest branching f… ▽ More In an experiment designed to search for and study very rare two-body decay modes of the K-long, we have observed four examples of the decay K-long -> e+ e-, where the expected background is 0.17+-0.10 events. This observation translates into a branching fraction of 8.7^{+5.7}_{-4.1} X 10^{-12}, consistent with recent theoretical predictions. This result represents by far the smallest branching fraction yet measured in particle physics. △ Less

Submitted 1 October, 1998; originally announced October 1998.

Comments: 9 pages, 3 figures

Report number: UTEXAS-HEP-98-14

Journal ref: Phys.Rev.Lett.81:4309-4312,1998

A Compact Beam Stop for a Rare Kaon Decay Experiment

Authors: E871 Collaboration, J. Belz, M. Diwan, M. Eckhause, C. M. Guss, A. D. Hancock, A. P. Heinson, V. L. Highland, G. W. Hoffmann, G. M. Irwin, J. R. Kane, S. H. Kettell, Y. Kuang, K. Lang, J. McDonough, W. K. McFarlane, W. R. Molzon, P. J. Riley, J. L. Ritchie, A. J. Schwartz, B. Ware, R. E. Welsh, R. G. Winter, M. Witkowski, S. G. Wojcicki , et al. (2 additional authors not shown)

Abstract: We describe the development and testing of a novel beam stop for use in a rare kaon decay experiment at the Brookhaven AGS. The beam stop is located inside a dipole spectrometer magnet in close proximity to straw drift chambers and intercepts a high-intensity neutral hadron beam. The design process, involving both Monte Carlo simulations and beam tests of alternative beam-stop shielding arrangem… ▽ More We describe the development and testing of a novel beam stop for use in a rare kaon decay experiment at the Brookhaven AGS. The beam stop is located inside a dipole spectrometer magnet in close proximity to straw drift chambers and intercepts a high-intensity neutral hadron beam. The design process, involving both Monte Carlo simulations and beam tests of alternative beam-stop shielding arrangements, had the goal of minimizing the leakage of particles from the beam stop and the resulting hit rates in detectors, while preserving maximum acceptance for events of interest. The beam tests consisted of measurements of rates in drift chambers, scintilation counter hodoscopes, a gas threshold Cherenkov counter, and a lead glass array. Measurements were also made with a set of specialized detectors which were sensitive to low-energy neutrons, photons, and charged particles. Comparisons are made between these measurements and a detailed Monte Carlo simulation. △ Less

Submitted 31 August, 1998; originally announced August 1998.

Comments: 39 pages, 14 figures, submitted to Nuclear Instruments and Methods

Report number: UTEXAS-HEP-98-13

Journal ref: Nucl.Instrum.Meth.A428:239-262,1999