-
Search for the Rare Decays $D_s^+\to h^+(h^{0})e^+e^-$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (618 additional authors not shown)
Abstract:
Using 7.33~fb$^{-1}$ of $e^{+}e^{-}$ collision data collected by the BESIII detector at center-of-mass energies in the range of $\sqrt{s}=4.128 - 4.226$~GeV, we search for the rare decays $D_{s}^+\to h^+(h^{0})e^{+}e^{-}$, where $h$ represents a kaon or pion. By requiring the $e^{+}e^{-}$ invariant mass to be consistent with a $φ(1020)$, $0.98<M(e^{+}e^{-})<1.04$ ~GeV/$c^2$, the decay…
▽ More
Using 7.33~fb$^{-1}$ of $e^{+}e^{-}$ collision data collected by the BESIII detector at center-of-mass energies in the range of $\sqrt{s}=4.128 - 4.226$~GeV, we search for the rare decays $D_{s}^+\to h^+(h^{0})e^{+}e^{-}$, where $h$ represents a kaon or pion. By requiring the $e^{+}e^{-}$ invariant mass to be consistent with a $φ(1020)$, $0.98<M(e^{+}e^{-})<1.04$ ~GeV/$c^2$, the decay $D_s^+\toπ^+φ,φ\to e^{+}e^{-}$ is observed with a statistical significance of 7.8$σ$, and evidence for the decay $D_s^+\toρ^+φ,φ\to e^{+}e^{-}$ is found for the first time with a statistical significance of 4.4$σ$. The decay branching fractions are measured to be $\mathcal{B}(D_s^+\toπ^+φ, φ\to e^{+}e^{-} )=(1.17^{+0.23}_{-0.21}\pm0.03)\times 10^{-5}$, and $\mathcal{B}(D_s^+\toρ^+φ, φ\to e^{+}e^{-} )=(2.44^{+0.67}_{-0.62}\pm 0.16)\times 10^{-5}$, where the first uncertainties are statistical and the second systematic. No significant signal for the three four-body decays of $D_{s}^{+}\to π^{+}π^{0}e^{+}e^{-},\ D_{s}^{+}\to K^{+}π^{0}e^{+}e^{-}$, and $D_{s}^{+}\to K_{S}^{0}π^{+}e^{+}e^{-}$ is observed. For $D_{s}^{+}\to π^{+}π^{0}e^{+}e^{-}$, the $φ$ mass region is vetoed to minimize the long-distance effects. The 90$\%$ confidence level upper limits set on the branching fractions of these decays are in the range of $(7.0-8.1)\times 10^{-5}$.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Search for $η_c(2S)\to 2(π^+π^-)$ and improved measurement of $χ_{cJ}\to 2(π^+π^-)$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (638 additional authors not shown)
Abstract:
We search for the hadronic decay $η_c(2S)\to 2(π^+π^-)$ in the $ψ(3686)\toγη_c(2S)$ radiative decay using $(27.12\pm 0.14)\times 10^8$ $ψ(3686)$ events collected by the BESIII detector at the BEPCII collider. No significant signal is found, and the upper limit of $\mathcal{B}[ψ(3686)\toγη_c(2S)]\mathcal{B}[η_c(2S)\to 2(π^+π^-)]$ is determined to be $0.78\times 10^{-6}$ at the 90\% confidence level…
▽ More
We search for the hadronic decay $η_c(2S)\to 2(π^+π^-)$ in the $ψ(3686)\toγη_c(2S)$ radiative decay using $(27.12\pm 0.14)\times 10^8$ $ψ(3686)$ events collected by the BESIII detector at the BEPCII collider. No significant signal is found, and the upper limit of $\mathcal{B}[ψ(3686)\toγη_c(2S)]\mathcal{B}[η_c(2S)\to 2(π^+π^-)]$ is determined to be $0.78\times 10^{-6}$ at the 90\% confidence level. Using $ψ(3686)\toγχ_{cJ}$ transitions, we also measure the branching fractions of $\mathcal{B}[χ_{cJ(J=0,1,2)}\to 2(π^+π^-)]$, which are $\mathcal{B}[χ_{c0}\to 2(π^+π^-)]=(2.127\pm 0.002~(\mathrm{stat.})\pm 0.101~(\mathrm{syst.}))$\%, $\mathcal{B}[χ_{c1}\to 2(π^+π^-)]=(0.685\pm 0.001~(\mathrm{stat.})\pm 0.031~\mathrm{syst.}))$\%, and $\mathcal{B}[χ_{c2}\to 2(π^+π^-)]=(1.153\pm 0.001~(\mathrm{stat.})\pm 0.063~(\mathrm{syst.}))$\%.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
Search for di-photon decays of an axion-like particle in radiative $J/ψ$ decays
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
M. R. An,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko
, et al. (604 additional authors not shown)
Abstract:
We search for the di-photon decay of a light pseudoscalar axion-like particle, $a$, in radiative $J/ψ$ decays, using 10 billion $J/ψ$ events collected with the BESIII detector. We find no evidence of a signal and set upper limits at the $95\%$ confidence level on the product branching fraction $\mathcal{B}(J/ψ\to γa) \times \mathcal{B}(a \to γγ)$ and the axion-like particle photon coupling constan…
▽ More
We search for the di-photon decay of a light pseudoscalar axion-like particle, $a$, in radiative $J/ψ$ decays, using 10 billion $J/ψ$ events collected with the BESIII detector. We find no evidence of a signal and set upper limits at the $95\%$ confidence level on the product branching fraction $\mathcal{B}(J/ψ\to γa) \times \mathcal{B}(a \to γγ)$ and the axion-like particle photon coupling constant $g_{a γγ}$ in the ranges of $(3.7-48.5) \times 10^{-8}$ and $(2.2 -101.8)\times 10^{-4}$ GeV$^{-1}$, respectively, for $0.18 \le m_a \le 2.85$ GeV/$c^2$. These are the most stringent limits to date in this mass region.
△ Less
Submitted 6 August, 2024; v1 submitted 6 April, 2024;
originally announced April 2024.
-
Evidence of the $h_c\to K_S^0 K^+π^-+c.c.$ decay
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (638 additional authors not shown)
Abstract:
Based on $(2.712\pm0.014)\times10^9$ $ψ(3686)$ events collected by the BESIII collaboration, evidence of the hadronic decay $h_c\to K_S^0K^+π^-+c.c.$ is found with a significance of $4.3σ$ in the $ψ(3686)\toπ^0 h_c$ process. The branching fraction of $h_c\to K_S^0 K^+π^- +c.c.$ is measured to be $(7.3\pm0.8\pm1.8)\times10^{-4}$, where the first and second uncertainties are statistical and systemat…
▽ More
Based on $(2.712\pm0.014)\times10^9$ $ψ(3686)$ events collected by the BESIII collaboration, evidence of the hadronic decay $h_c\to K_S^0K^+π^-+c.c.$ is found with a significance of $4.3σ$ in the $ψ(3686)\toπ^0 h_c$ process. The branching fraction of $h_c\to K_S^0 K^+π^- +c.c.$ is measured to be $(7.3\pm0.8\pm1.8)\times10^{-4}$, where the first and second uncertainties are statistical and systematic, respectively. Combining with the exclusive decay width of $η_c\to K\bar{K}π$, our result indicates inconsistencies with both pQCD and NRQCD predictions.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Search for $C$-even states decaying to $D_{s}^{\pm}D_{s}^{*\mp}$ with masses between $4.08$ and $4.32~\mathrm{GeV}/c^{2}$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (638 additional authors not shown)
Abstract:
Six $C$-even states, denoted as $X$, with quantum numbers $J^{PC}=0^{-+}$, $1^{\pm+}$, or $2^{\pm+}$, are searched for via the $e^+e^-\toγD_{s}^{\pm}D_{s}^{*\mp}$ process using $(1667.39\pm8.84)~\mathrm{pb}^{-1}$ of $e^+e^-$ collision data collected with the BESIII detector operating at the BEPCII storage ring at center-of-mass energy of $\sqrt{s}=(4681.92\pm0.30)~\mathrm{MeV}$. No statistically s…
▽ More
Six $C$-even states, denoted as $X$, with quantum numbers $J^{PC}=0^{-+}$, $1^{\pm+}$, or $2^{\pm+}$, are searched for via the $e^+e^-\toγD_{s}^{\pm}D_{s}^{*\mp}$ process using $(1667.39\pm8.84)~\mathrm{pb}^{-1}$ of $e^+e^-$ collision data collected with the BESIII detector operating at the BEPCII storage ring at center-of-mass energy of $\sqrt{s}=(4681.92\pm0.30)~\mathrm{MeV}$. No statistically significant signal is observed in the mass range from $4.08$ to $4.32~\mathrm{GeV}/c^{2}$. The upper limits of $σ[e^+e^- \to γX] \cdot \mathcal{B}[X \to D_{s}^{\pm} D_{s}^{*\mp}]$ at a $90\%$ confidence level are determined.
△ Less
Submitted 30 August, 2024; v1 submitted 2 April, 2024;
originally announced April 2024.
-
mChartQA: A universal benchmark for multimodal Chart Question Answer based on Vision-Language Alignment and Reasoning
Authors:
Jingxuan Wei,
Nan Xu,
Guiyong Chang,
Yin Luo,
BiHui Yu,
Ruifeng Guo
Abstract:
In the fields of computer vision and natural language processing, multimodal chart question-answering, especially involving color, structure, and textless charts, poses significant challenges. Traditional methods, which typically involve either direct multimodal processing or a table-to-text conversion followed by language model analysis, have limitations in effectively handling these complex scen…
▽ More
In the fields of computer vision and natural language processing, multimodal chart question-answering, especially involving color, structure, and textless charts, poses significant challenges. Traditional methods, which typically involve either direct multimodal processing or a table-to-text conversion followed by language model analysis, have limitations in effectively handling these complex scenarios. This paper introduces a novel multimodal chart question-answering model, specifically designed to address these intricate tasks. Our model integrates visual and linguistic processing, overcoming the constraints of existing methods. We adopt a dual-phase training approach: the initial phase focuses on aligning image and text representations, while the subsequent phase concentrates on optimizing the model's interpretative and analytical abilities in chart-related queries. This approach has demonstrated superior performance on multiple public datasets, particularly in handling color, structure, and textless chart questions, indicating its effectiveness in complex multimodal tasks.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
CAMO: Correlation-Aware Mask Optimization with Modulated Reinforcement Learning
Authors:
Xiaoxiao Liang,
Haoyu Yang,
Kang Liu,
Bei Yu,
Yuzhe Ma
Abstract:
Optical proximity correction (OPC) is a vital step to ensure printability in modern VLSI manufacturing. Various OPC approaches based on machine learning have been proposed to pursue performance and efficiency, which are typically data-driven and hardly involve any particular considerations of the OPC problem, leading to potential performance or efficiency bottlenecks. In this paper, we propose CAM…
▽ More
Optical proximity correction (OPC) is a vital step to ensure printability in modern VLSI manufacturing. Various OPC approaches based on machine learning have been proposed to pursue performance and efficiency, which are typically data-driven and hardly involve any particular considerations of the OPC problem, leading to potential performance or efficiency bottlenecks. In this paper, we propose CAMO, a reinforcement learning-based OPC system that specifically integrates important principles of the OPC problem. CAMO explicitly involves the spatial correlation among the movements of neighboring segments and an OPC-inspired modulation for movement action selection. Experiments are conducted on both via layer patterns and metal layer patterns. The results demonstrate that CAMO outperforms state-of-the-art OPC engines from both academia and industry.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Towards Practical Requirement Analysis and Verification: A Case Study on Software IP Components in Aerospace Embedded Systems
Authors:
Zhi Ma,
Cheng Wen,
Jie Su,
Ming Zhao,
Bin Yu,
Xu Lu,
Cong Tian
Abstract:
IP-based software design is a crucial research field that aims to improve efficiency and reliability by reusing complex software components known as intellectual property (IP) components. To ensure the reusability of these components, particularly in security-sensitive software systems, it is necessary to analyze the requirements and perform formal verification for each IP component. However, conv…
▽ More
IP-based software design is a crucial research field that aims to improve efficiency and reliability by reusing complex software components known as intellectual property (IP) components. To ensure the reusability of these components, particularly in security-sensitive software systems, it is necessary to analyze the requirements and perform formal verification for each IP component. However, converting the requirements of IP components from natural language descriptions to temporal logic and subsequently conducting formal verification demands domain expertise and non-trivial manpower. This paper presents a case study on software IP components derived from aerospace embedded systems, with the objective of automating the requirement analysis and verification process. The study begins by employing Large Language Models to convert unstructured natural language into formal specifications. Subsequently, three distinct verification techniques are employed to ascertain whether the source code meets the extracted temporal logic properties. By doing so, five real-world IP components from the China Academy of Space Technology (CAST) have been successfully verified.
△ Less
Submitted 31 March, 2024;
originally announced April 2024.
-
Minimum-Norm Interpolation Under Covariate Shift
Authors:
Neil Mallinar,
Austin Zane,
Spencer Frei,
Bin Yu
Abstract:
Transfer learning is a critical part of real-world machine learning deployments and has been extensively studied in experimental works with overparameterized neural networks. However, even in the simplest setting of linear regression a notable gap still exists in the theoretical understanding of transfer learning. In-distribution research on high-dimensional linear regression has led to the identi…
▽ More
Transfer learning is a critical part of real-world machine learning deployments and has been extensively studied in experimental works with overparameterized neural networks. However, even in the simplest setting of linear regression a notable gap still exists in the theoretical understanding of transfer learning. In-distribution research on high-dimensional linear regression has led to the identification of a phenomenon known as \textit{benign overfitting}, in which linear interpolators overfit to noisy training labels and yet still generalize well. This behavior occurs under specific conditions on the source covariance matrix and input data dimension. Therefore, it is natural to wonder how such high-dimensional linear models behave under transfer learning. We prove the first non-asymptotic excess risk bounds for benignly-overfit linear interpolators in the transfer learning setting. From our analysis, we propose a taxonomy of \textit{beneficial} and \textit{malignant} covariate shifts based on the degree of overparameterization. We follow our analysis with empirical studies that show these beneficial and malignant covariate shifts for linear interpolators on real image data, and for fully-connected neural networks in settings where the input data dimension is larger than the training sample size.
△ Less
Submitted 17 July, 2024; v1 submitted 30 March, 2024;
originally announced April 2024.
-
Polarization-based Metalenses with High Numerical Aperture and Focusing Efficiency Utilizing Silicon-rich Nitride
Authors:
Alireza Khalilian,
Bowen Yu,
Yasha Yi
Abstract:
We explore the cutting-edge application of silicon-rich nitride (SRN) in the realm of high numerical aperture (NA) metalens design, focusing on the crucial role of pitch size optimization in amplifying lens efficiency through advanced simulations. Our investigation unveils how the exceptional tunable high refractive index of SRN can be harnessed to achieve significant advancements in metalens perf…
▽ More
We explore the cutting-edge application of silicon-rich nitride (SRN) in the realm of high numerical aperture (NA) metalens design, focusing on the crucial role of pitch size optimization in amplifying lens efficiency through advanced simulations. Our investigation unveils how the exceptional tunable high refractive index of SRN can be harnessed to achieve significant advancements in metalens performance. By meticulously designing and simulating two innovative SRN-based metalenses - Mk1, with an NA of 0.9, reaching an impressive 75% focusing efficiency with full width at half maximum (FWHM) of 0.53λ, and Mk2, with an NA of 0.99, achieving a 42% efficiency while maintaining an FWHM of 0.48λ. We demonstrate the critical influence of reduced pitch size on enhancing efficiency. This study not only highlights the unparalleled potential of SRN in optimizing metalens efficiency but also represents a significant leap forward in the field of nanophotonics, offering new pathways for the development of highly efficient flat photonic devices.
△ Less
Submitted 29 March, 2024;
originally announced April 2024.
-
A Signature Based Approach Towards Global Channel Charting with Ultra Low Complexity
Authors:
Longhai Zhao,
Yunchuan Yang,
Qi Xiong,
He Wang,
Bin Yu,
Feifei Sun,
Chengjun Sun
Abstract:
Channel charting, an unsupervised learning method that learns a low-dimensional representation from channel information to preserve geometrical property of physical space of user equipments (UEs), has drawn many attentions from both academic and industrial communities, because it can facilitate many downstream tasks, such as indoor localization, UE handover, beam management, and so on. However, ma…
▽ More
Channel charting, an unsupervised learning method that learns a low-dimensional representation from channel information to preserve geometrical property of physical space of user equipments (UEs), has drawn many attentions from both academic and industrial communities, because it can facilitate many downstream tasks, such as indoor localization, UE handover, beam management, and so on. However, many previous works mainly focus on charting that only preserves local geometry and use raw channel information to learn the chart, which do not consider the global geometry and are often computationally intensive and very time-consuming. Therefore, in this paper, a novel signature based approach for global channel charting with ultra low complexity is proposed. By using an iterated-integral based method called signature transform, a compact feature map and a novel distance metric are proposed, which enable channel charting with ultra low complexity and preserving both local and global geometry. We demonstrate the efficacy of our method using synthetic and open-source real-field datasets.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Kinetostatic Analysis for 6RUS Parallel Continuum Robot using Cosserat Rod Theory
Authors:
Vinayvivian Rodrigues,
Bingbin Yu,
Christoph Stoeffler,
Shivesh Kumar
Abstract:
Parallel Continuum Robots (PCR) are closed-loop mechanisms but use elastic kinematic links connected in parallel between the end-effector (EE) and the base platform. PCRs are actuated primarily through large deflections of the interconnected elastic links unlike by rigid joints in rigid parallel mechanisms. In this paper, Cosserat rod theory-based forward and inverse kinetostatic models of 6RUS PC…
▽ More
Parallel Continuum Robots (PCR) are closed-loop mechanisms but use elastic kinematic links connected in parallel between the end-effector (EE) and the base platform. PCRs are actuated primarily through large deflections of the interconnected elastic links unlike by rigid joints in rigid parallel mechanisms. In this paper, Cosserat rod theory-based forward and inverse kinetostatic models of 6RUS PCR are proposed. A set of simulations are performed to analyze the proposed PCR structure which includes maneuverability in 3-dimensional space through trajectory following, deformation effects due to the planar rotation of the EE platform, and axial stiffness evaluation at the EE.
△ Less
Submitted 28 March, 2024;
originally announced March 2024.
-
Measurement of absolute branching fractions of $D_s^+$ hadronic decays
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (632 additional authors not shown)
Abstract:
Using $e^+ e^-$ collision data collected at the BESIII detector at center-of-mass energies between 4.128 and 4.226 GeV, corresponding to an integrated luminosity of $7.33~{\rm fb}^{-1}$, we determine the absolute branching fractions of fifteen hadronic $D_s^{+}$ decays with a double-tag technique. In particular, we make precise measurements of the branching fractions…
▽ More
Using $e^+ e^-$ collision data collected at the BESIII detector at center-of-mass energies between 4.128 and 4.226 GeV, corresponding to an integrated luminosity of $7.33~{\rm fb}^{-1}$, we determine the absolute branching fractions of fifteen hadronic $D_s^{+}$ decays with a double-tag technique. In particular, we make precise measurements of the branching fractions $\mathcal{B}(D_s^+ \to K^+ K^- π^+)=(5.49 \pm 0.04 \pm 0.07)\%$, $\mathcal{B}(D_s^+ \to K_S^0 K^+)=(1.50 \pm 0.01 \pm 0.01)\%$ and $\mathcal{B}(D_s^+ \to K^+ K^- π^+ π^0)=(5.50 \pm 0.05 \pm 0.11)\%$, where the first uncertainties are statistical and the second ones are systematic. The \emph{CP} asymmetries in these decays are also measured and all are found to be compatible with zero.
△ Less
Submitted 30 May, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Observation of the semileptonic decays $D^0\rightarrow K_S^0π^-π^0 e^+ ν_e$ and $D^+\rightarrow K_S^0π^+π^- e^+ ν_e$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
X. C. Ai,
R. Aliberti,
A. Amoroso,
M. R. An,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (600 additional authors not shown)
Abstract:
By analyzing $e^+e^-$ annihilation data corresponding to an integrated luminosity of 2.93 $\rm fb^{-1}$ collected at a center-of-mass energy of 3.773 GeV with the \text{BESIII} detector, the first observation of the semileptonic decays $D^0\rightarrow K_S^0π^-π^0 e^+ ν_e$ and $D^+\rightarrow K_S^0π^+π^- e^+ ν_e$ is reported. With a dominant hadronic contribution from $K_1(1270)$, the branching fra…
▽ More
By analyzing $e^+e^-$ annihilation data corresponding to an integrated luminosity of 2.93 $\rm fb^{-1}$ collected at a center-of-mass energy of 3.773 GeV with the \text{BESIII} detector, the first observation of the semileptonic decays $D^0\rightarrow K_S^0π^-π^0 e^+ ν_e$ and $D^+\rightarrow K_S^0π^+π^- e^+ ν_e$ is reported. With a dominant hadronic contribution from $K_1(1270)$, the branching fractions are measured to be $\mathcal{B}(D^0\rightarrow {K}_1(1270)^-(\to K^0_Sπ^-π^0)e^+ν_e)=(1.69^{+0.53}_{-0.46}\pm0.15)\times10^{-4}$ and $\mathcal{B}(D^+\to \bar{K}_1(1270)^0(\to K^0_Sπ^+π^-)e^+ν_e)=(1.47^{+0.45}_{-0.40}\pm0.20)\times10^{-4}$ with statistical significance of 5.4$σ$ and 5.6$σ$, respectively. When combined with measurements of the $K_1(1270)\to K^+π^-π$ decays, the absolute branching fractions are determined to be $\mathcal{B}(D^0\to K_1(1270)^-e^+ν_e)=(1.05^{+0.33}_{-0.28}\pm0.12\pm0.12)\times10^{-3}$ and $\mathcal{B}(D^+\to \bar{K}_1(1270)^0e^+ν_e)=(1.29^{+0.40}_{-0.35}\pm0.18\pm0.15)\times10^{-3}$. The first and second uncertainties are statistical and systematic, respectively, and the third uncertainties originate from the assumed branching fractions of the $K_1(1270)\to Kππ$ decays.
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Cross section measurement of $e^+e^-\to ηψ(2S)$ and search for $e^+e^-\toη\tilde{X}(3872)$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (639 additional authors not shown)
Abstract:
The energy-dependent cross section for $e^+e^-\to ηψ(2S)$ is measured at eighteen center of mass energies from 4.288 GeV to 4.951 GeV using the BESIII detector. Using the same data samples, we also perform the first search for the reaction $e^+e^-\toη\tilde{X}(3872)$, but no evidence is found for the $\tilde{X}(3872)$ in the $π^+π^- J/ψ$ mass distribution. At each of the eighteen center of mass en…
▽ More
The energy-dependent cross section for $e^+e^-\to ηψ(2S)$ is measured at eighteen center of mass energies from 4.288 GeV to 4.951 GeV using the BESIII detector. Using the same data samples, we also perform the first search for the reaction $e^+e^-\toη\tilde{X}(3872)$, but no evidence is found for the $\tilde{X}(3872)$ in the $π^+π^- J/ψ$ mass distribution. At each of the eighteen center of mass energies, upper limits at the 90\% confidence level on the cross section for $e^+e^-\toηψ(2S)$ and on the product of the $e^+e^-\toη\tilde{X}(3872)$ cross section with the branching fraction of $\tilde{X}(3872)\toπ^+π^- J/ψ$ are reported.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
ByteCard: Enhancing ByteDance's Data Warehouse with Learned Cardinality Estimation
Authors:
Yuxing Han,
Haoyu Wang,
Lixiang Chen,
Yifeng Dong,
Xing Chen,
Benquan Yu,
Chengcheng Yang,
Weining Qian
Abstract:
Cardinality estimation is a critical component and a longstanding challenge in modern data warehouses. ByteHouse, ByteDance's cloud-native engine for extensive data analysis in exabyte-scale environments, serves numerous internal decision-making business scenarios. With the increasing demand for ByteHouse, cardinality estimation becomes the bottleneck for efficiently processing queries. Specifical…
▽ More
Cardinality estimation is a critical component and a longstanding challenge in modern data warehouses. ByteHouse, ByteDance's cloud-native engine for extensive data analysis in exabyte-scale environments, serves numerous internal decision-making business scenarios. With the increasing demand for ByteHouse, cardinality estimation becomes the bottleneck for efficiently processing queries. Specifically, the existing query optimizer of ByteHouse uses the traditional Selinger-like cardinality estimator, which can produce substantial estimation errors, resulting in suboptimal query plans. To improve cardinality estimation accuracy while maintaining a practical inference overhead, we develop a framework ByteCard that enables efficient training and integration of learned cardinality estimators. Furthermore, ByteCard adapts recent advances in cardinality estimation to build models that can balance accuracy and practicality (e.g., inference latency, model size, training overhead). We observe significant query processing speed-up in ByteHouse after replacing the existing cardinality estimator with ByteCard for several optimization scenarios. Evaluations on real-world datasets show the integration of ByteCard leads to an improvement of up to 30% in the 99th quantile of latency. At last, we share our valuable experience in engineering advanced cardinality estimators. This experience can help ByteHouse integrate more learning-based solutions on the critical query execution path in the future.
△ Less
Submitted 11 April, 2024; v1 submitted 24 March, 2024;
originally announced March 2024.
-
ChatPattern: Layout Pattern Customization via Natural Language
Authors:
Zixiao Wang,
Yunheng Shen,
Xufeng Yao,
Wenqian Zhao,
Yang Bai,
Farzan Farnia,
Bei Yu
Abstract:
Existing works focus on fixed-size layout pattern generation, while the more practical free-size pattern generation receives limited attention. In this paper, we propose ChatPattern, a novel Large-Language-Model (LLM) powered framework for flexible pattern customization. ChatPattern utilizes a two-part system featuring an expert LLM agent and a highly controllable layout pattern generator. The LLM…
▽ More
Existing works focus on fixed-size layout pattern generation, while the more practical free-size pattern generation receives limited attention. In this paper, we propose ChatPattern, a novel Large-Language-Model (LLM) powered framework for flexible pattern customization. ChatPattern utilizes a two-part system featuring an expert LLM agent and a highly controllable layout pattern generator. The LLM agent can interpret natural language requirements and operate design tools to meet specified needs, while the generator excels in conditional layout generation, pattern modification, and memory-friendly patterns extension. Experiments on challenging pattern generation setting shows the ability of ChatPattern to synthesize high-quality large-scale patterns.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Precise measurement of the $e^+e^-\to D_s^+D_s^-$ cross sections at center-of-mass energies from threshold to 4.95 GeV
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (638 additional authors not shown)
Abstract:
Using the $e^+e^-$ collision data collected with the BESIII detector operating at the BEPCII collider, at center-of-mass energies from the threshold to $4.95$~GeV, we present precise measurements of the cross sections for the process $e^+e^-\to D_s^+D_s^-$ using a single tag method. The resulting cross section lineshape exhibits several new structures, thereby offering an input for coupled channel…
▽ More
Using the $e^+e^-$ collision data collected with the BESIII detector operating at the BEPCII collider, at center-of-mass energies from the threshold to $4.95$~GeV, we present precise measurements of the cross sections for the process $e^+e^-\to D_s^+D_s^-$ using a single tag method. The resulting cross section lineshape exhibits several new structures, thereby offering an input for coupled channel analysis and model tests, which are critical to understand vector charmonium-like states with masses between 4 and 5~GeV.
△ Less
Submitted 22 March, 2024;
originally announced March 2024.
-
Spin injection and detection in a Si-based ferromagnetic tunnel junction: A theoretical model based on the band diagram and experimental demonstration
Authors:
Baisen Yu,
Shoichi Sato,
Masaaki Tanaka,
Ryosho Nakane
Abstract:
We have experimentally and theoretically investigated the spin injection/detection polarization in a Si-based ferromagnetic tunnel junction with an amorphous MgO layer, and demonstrated that the experimental features of the spin polarization in a wide bias range can be well explained using our theoretical model based on the band diagram of the junction and the direct tunneling mechanism. It is sho…
▽ More
We have experimentally and theoretically investigated the spin injection/detection polarization in a Si-based ferromagnetic tunnel junction with an amorphous MgO layer, and demonstrated that the experimental features of the spin polarization in a wide bias range can be well explained using our theoretical model based on the band diagram of the junction and the direct tunneling mechanism. It is shown that the spin polarization originates from the band diagrams of the ferromagnetic Fe layer and n+-Si channel in the junction, while the spin selectivity of the MgO tunnel barrier is not necessary. Besides, we clarified the mechanism of the reduction in spin polarization when the bias is high and nonlinear properties are prominent, where the widely-used spin injection/detection model proposed by Valet and Fert is not applicable. The dominant mechanism of such reduction is found to be spin accumulation saturation (SAS) at the n+-Si interface in contact with the MgO layer as the bias is increased in the spin extraction geometry, which is inevitable in semiconductor-based ferromagnetic tunnel junctions. We performed numerical calculations on a two-terminal spin transport device with a n+-Si channel using the junction properties extracted from the experiments, and revealed that the magnetoresistance (MR) ratio is suppressed mainly by SAS in a higher bias range. Furthermore, we proposed methods for improving the MR ratio in two-terminal spin transport devices. Our experiments and theoretical model provide a deep understanding of the spin injection/detection phenomena in semiconductor-based spin transport devices, toward the realization of high performance under reasonably high bias conditions for practical use.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
Search for $ΔS=2$ nonleptonic hyperon decays $Ω^-\toΣ^{0}π^{-}$ and $Ω^-\to nK^{-}$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (638 additional authors not shown)
Abstract:
Using $(27.12 \pm 0.14) \times 10^{8}$ $ψ(3686)$ events collected by the BESIII detector at the center-of-mass energy of $\sqrt{s} = 3.686$ GeV, we search for the first time for two nonleptonic hyperon decays that change strangeness by two units, $Ω^-\toΣ^{0}π^-$ and $Ω^-\to nK^{-}$. No significant signal is observed. The upper limits on their decay branching fractions are determined to be…
▽ More
Using $(27.12 \pm 0.14) \times 10^{8}$ $ψ(3686)$ events collected by the BESIII detector at the center-of-mass energy of $\sqrt{s} = 3.686$ GeV, we search for the first time for two nonleptonic hyperon decays that change strangeness by two units, $Ω^-\toΣ^{0}π^-$ and $Ω^-\to nK^{-}$. No significant signal is observed. The upper limits on their decay branching fractions are determined to be $\mathcal{B}(Ω^-\toΣ^{0}π^-) < 5.4\times 10^{-4}$ and $\mathcal{B}(Ω^-\to nK^{-}) < 2.4\times 10^{-4}$ at the $90\%$ confidence level.
△ Less
Submitted 14 April, 2024; v1 submitted 20 March, 2024;
originally announced March 2024.
-
HDLdebugger: Streamlining HDL debugging with Large Language Models
Authors:
Xufeng Yao,
Haoyang Li,
Tsz Ho Chan,
Wenyi Xiao,
Mingxuan Yuan,
Yu Huang,
Lei Chen,
Bei Yu
Abstract:
In the domain of chip design, Hardware Description Languages (HDLs) play a pivotal role. However, due to the complex syntax of HDLs and the limited availability of online resources, debugging HDL codes remains a difficult and time-intensive task, even for seasoned engineers. Consequently, there is a pressing need to develop automated HDL code debugging models, which can alleviate the burden on har…
▽ More
In the domain of chip design, Hardware Description Languages (HDLs) play a pivotal role. However, due to the complex syntax of HDLs and the limited availability of online resources, debugging HDL codes remains a difficult and time-intensive task, even for seasoned engineers. Consequently, there is a pressing need to develop automated HDL code debugging models, which can alleviate the burden on hardware engineers. Despite the strong capabilities of Large Language Models (LLMs) in generating, completing, and debugging software code, their utilization in the specialized field of HDL debugging has been limited and, to date, has not yielded satisfactory results. In this paper, we propose an LLM-assisted HDL debugging framework, namely HDLdebugger, which consists of HDL debugging data generation via a reverse engineering approach, a search engine for retrieval-augmented generation, and a retrieval-augmented LLM fine-tuning approach. Through the integration of these components, HDLdebugger can automate and streamline HDL debugging for chip design. Our comprehensive experiments, conducted on an HDL code dataset sourced from Huawei, reveal that HDLdebugger outperforms 13 cutting-edge LLM baselines, displaying exceptional effectiveness in HDL code debugging.
△ Less
Submitted 18 March, 2024;
originally announced March 2024.
-
Scaling Data Diversity for Fine-Tuning Language Models in Human Alignment
Authors:
Feifan Song,
Bowen Yu,
Hao Lang,
Haiyang Yu,
Fei Huang,
Houfeng Wang,
Yongbin Li
Abstract:
Alignment with human preference prevents large language models (LLMs) from generating misleading or toxic content while requiring high-cost human feedback. Assuming resources of human annotation are limited, there are two different ways of allocating considered: more diverse PROMPTS or more diverse RESPONSES to be labeled. Nonetheless, a straightforward comparison between their impact is absent. I…
▽ More
Alignment with human preference prevents large language models (LLMs) from generating misleading or toxic content while requiring high-cost human feedback. Assuming resources of human annotation are limited, there are two different ways of allocating considered: more diverse PROMPTS or more diverse RESPONSES to be labeled. Nonetheless, a straightforward comparison between their impact is absent. In this work, we first control the diversity of both sides according to the number of samples for fine-tuning, which can directly reflect their influence. We find that instead of numerous prompts, more responses but fewer prompts better trigger LLMs for human alignment. Additionally, the concept of diversity for prompts can be more complex than responses that are typically quantified by single digits. Consequently, a new formulation of prompt diversity is proposed, further implying a linear correlation with the final performance of LLMs after fine-tuning. We also leverage it on data augmentation and conduct experiments to show its effect on different algorithms.
△ Less
Submitted 30 March, 2024; v1 submitted 17 March, 2024;
originally announced March 2024.
-
Test of lepton universality and measurement of the form factors of $D^0\to K^{*}(892)^-μ^+ν_μ$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (637 additional authors not shown)
Abstract:
We report a first study of the semileptonic decay $D^0\rightarrow K^-π^0μ^{+}ν_μ$ by analyzing an $e^+e^-$ annihilation data sample of $7.9~\mathrm{fb}^{-1}$ collected at the center-of-mass energy of 3.773 GeV with the BESIII detector. The absolute branching fraction of $D^0\to K^-π^0μ^{+}ν_μ$ is measured for the first time to be $(0.729 \pm 0.014_{\rm stat} \pm 0.011_{\rm syst})\%$. Based on an a…
▽ More
We report a first study of the semileptonic decay $D^0\rightarrow K^-π^0μ^{+}ν_μ$ by analyzing an $e^+e^-$ annihilation data sample of $7.9~\mathrm{fb}^{-1}$ collected at the center-of-mass energy of 3.773 GeV with the BESIII detector. The absolute branching fraction of $D^0\to K^-π^0μ^{+}ν_μ$ is measured for the first time to be $(0.729 \pm 0.014_{\rm stat} \pm 0.011_{\rm syst})\%$. Based on an amplitude analysis, the $S\text{-}{\rm wave}$ contribution is determined to be $(5.76 \pm 0.35_{\rm stat} \pm 0.29_{\rm syst})\%$ of the total decay rate in addition to the dominated $K^{*}(892)^-$ component. The branching fraction of $D^0\to K^{*}(892)^-μ^+ν_μ$ is given to be $(2.062 \pm 0.039_{\rm stat} \pm 0.032_{\rm syst})\%$, which improves the precision of the world average by a factor of 5. Combining with the world average of ${\mathcal B}(D^0\to K^{*}(892)^-e^+ν_e)$, the ratio of the branching fractions obtained is $\frac{{\mathcal B}(D^0\to K^{*}(892)^-μ^+ν_μ)}{{\mathcal B}(D^0\to K^{*}(892)^-e^+ν_e)} = 0.96\pm0.08$, in agreement with lepton flavor universality. Furthermore, assuming single-pole dominance parameterization, the most precise hadronic form factor ratios for $D^0\to K^{*}(892)^{-} μ^+ν_μ$ are extracted to be $r_{V}=V(0)/A_1(0)=1.37 \pm 0.09_{\rm stat} \pm 0.03_{\rm syst}$ and $r_{2}=A_2(0)/A_1(0)=0.76 \pm 0.06_{\rm stat} \pm 0.02_{\rm syst}$.
△ Less
Submitted 16 March, 2024;
originally announced March 2024.
-
An efficient asymptotic DC method for sparse and low-rank matrix recovery
Authors:
Mingcai Ding,
Xiaoliang Song,
Bo Yu
Abstract:
The optimization problem of sparse and low-rank matrix recovery is considered, which involves a least squares problem with a rank constraint and a cardinality constraint. To overcome the challenges posed by these constraints, an asymptotic difference-of-convex (ADC) method that employs a Moreau smoothing approach and an exact penalty approach is proposed to transform this problem into a DC program…
▽ More
The optimization problem of sparse and low-rank matrix recovery is considered, which involves a least squares problem with a rank constraint and a cardinality constraint. To overcome the challenges posed by these constraints, an asymptotic difference-of-convex (ADC) method that employs a Moreau smoothing approach and an exact penalty approach is proposed to transform this problem into a DC programming format gradually. To solve the gained DC programming, by making full use of its DC structure, an efficient inexact DC algorithm with sieving strategy (siDCA) is introduced. The subproblem of siDCA is solved by an efficient dual-based semismooth Newton method. The convergence of the solution sequence generated by siDCA is proved. To illustrate the effectiveness of ADC-siDCA, matrix recovery experiments on nonnegative and positive semidefinite matrices. The numerical results are compared with those obtained using a successive DC approximation minimization method and a penalty proximal alternating linearized minimization approach. The outcome of the comparison indicates that ADC-siDCA surpasses the other two methods in terms of efficiency and recovery error. Additionally, numerical experiments on sparse phase retrieval demonstrate that ADC-siDCA is a valuable tool for recovering sparse and low-rank Hermitian matrices.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Analytical Heterogeneous Die-to-Die 3D Placement with Macros
Authors:
Yuxuan Zhao,
Peiyu Liao,
Siting Liu,
Jiaxi Jiang,
Yibo Lin,
Bei Yu
Abstract:
This paper presents an innovative approach to 3D mixed-size placement in heterogeneous face-to-face (F2F) bonded 3D ICs. We propose an analytical framework that utilizes a dedicated density model and a bistratal wirelength model, effectively handling macros and standard cells in a 3D solution space. A novel 3D preconditioner is developed to resolve the topological and physical gap between macros a…
▽ More
This paper presents an innovative approach to 3D mixed-size placement in heterogeneous face-to-face (F2F) bonded 3D ICs. We propose an analytical framework that utilizes a dedicated density model and a bistratal wirelength model, effectively handling macros and standard cells in a 3D solution space. A novel 3D preconditioner is developed to resolve the topological and physical gap between macros and standard cells. Additionally, we propose a mixed-integer linear programming (MILP) formulation for macro rotation to optimize wirelength. Our framework is implemented with full-scale GPU acceleration, leveraging an adaptive 3D density accumulation algorithm and an incremental wirelength gradient algorithm. Experimental results on ICCAD 2023 contest benchmarks demonstrate that our framework can achieve 5.9% quality score improvement compared to the first-place winner with 4.0x runtime speedup. Additional experiments on modern RISC-V designs further validate the generalizability and superiority of our framework.
△ Less
Submitted 13 August, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
Designing a Data Science simulation with MERITS: A Primer
Authors:
Corrine F Elliott,
James Duncan,
Tiffany M Tang,
Merle Behr,
Karl Kumbier,
Bin Yu
Abstract:
Simulations play a crucial role in the modern scientific process. Yet despite (or due to) their ubiquity, the Data Science community shares neither a comprehensive definition for a "high-quality" study nor a consolidated guide to designing one. Inspired by the Predictability-Computability-Stability (PCS) framework for 'veridical' Data Science, we propose six MERITS that a Data Science simulation s…
▽ More
Simulations play a crucial role in the modern scientific process. Yet despite (or due to) their ubiquity, the Data Science community shares neither a comprehensive definition for a "high-quality" study nor a consolidated guide to designing one. Inspired by the Predictability-Computability-Stability (PCS) framework for 'veridical' Data Science, we propose six MERITS that a Data Science simulation should satisfy. Modularity and Efficiency support the Computability of a study, encouraging clean and flexible implementation. Realism and Stability address the conceptualization of the research problem: How well does a study Predict reality, such that its conclusions generalize to new data/contexts? Finally, Intuitiveness and Transparency encourage good communication and trustworthiness of study design and results. Drawing an analogy between simulation and cooking, we moreover offer (a) a conceptual framework for thinking about the anatomy of a simulation 'recipe'; (b) a baker's dozen in guidelines to aid the Data Science practitioner in designing one; and (c) a case study deconstructing a simulation through the lens of our framework to demonstrate its practical utility. By contributing this "PCS primer" for high-quality Data Science simulation, we seek to distill and enrich the best practices of simulation across disciplines into a cohesive recipe for trustworthy, veridical Data Science.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Learning-driven Physically-aware Large-scale Circuit Gate Sizing
Authors:
Yuyang Ye,
Peng Xu,
Lizheng Ren,
Tinghuan Chen,
Hao Yan,
Bei Yu,
Longxing Shi
Abstract:
Gate sizing plays an important role in timing optimization after physical design. Existing machine learning-based gate sizing works cannot optimize timing on multiple timing paths simultaneously and neglect the physical constraint on layouts. They cause sub-optimal sizing solutions and low-efficiency issues when compared with commercial gate sizing tools. In this work, we propose a learning-driven…
▽ More
Gate sizing plays an important role in timing optimization after physical design. Existing machine learning-based gate sizing works cannot optimize timing on multiple timing paths simultaneously and neglect the physical constraint on layouts. They cause sub-optimal sizing solutions and low-efficiency issues when compared with commercial gate sizing tools. In this work, we propose a learning-driven physically-aware gate sizing framework to optimize timing performance on large-scale circuits efficiently. In our gradient descent optimization-based work, for obtaining accurate gradients, a multi-modal gate sizing-aware timing model is achieved via learning timing information on multiple timing paths and physical information on multiple-scaled layouts jointly. Then, gradient generation based on the sizing-oriented estimator and adaptive back-propagation are developed to update gate sizes. Our results demonstrate that our work achieves higher timing performance improvements in a faster way compared with the commercial gate sizing tool.
△ Less
Submitted 12 March, 2024;
originally announced March 2024.
-
The Dawn of AI-Native EDA: Opportunities and Challenges of Large Circuit Models
Authors:
Lei Chen,
Yiqi Chen,
Zhufei Chu,
Wenji Fang,
Tsung-Yi Ho,
Ru Huang,
Yu Huang,
Sadaf Khan,
Min Li,
Xingquan Li,
Yu Li,
Yun Liang,
Jinwei Liu,
Yi Liu,
Yibo Lin,
Guojie Luo,
Zhengyuan Shi,
Guangyu Sun,
Dimitrios Tsaras,
Runsheng Wang,
Ziyi Wang,
Xinming Wei,
Zhiyao Xie,
Qiang Xu,
Chenhao Xue
, et al. (14 additional authors not shown)
Abstract:
Within the Electronic Design Automation (EDA) domain, AI-driven solutions have emerged as formidable tools, yet they typically augment rather than redefine existing methodologies. These solutions often repurpose deep learning models from other domains, such as vision, text, and graph analytics, applying them to circuit design without tailoring to the unique complexities of electronic circuits. Suc…
▽ More
Within the Electronic Design Automation (EDA) domain, AI-driven solutions have emerged as formidable tools, yet they typically augment rather than redefine existing methodologies. These solutions often repurpose deep learning models from other domains, such as vision, text, and graph analytics, applying them to circuit design without tailoring to the unique complexities of electronic circuits. Such an AI4EDA approach falls short of achieving a holistic design synthesis and understanding, overlooking the intricate interplay of electrical, logical, and physical facets of circuit data. This paper argues for a paradigm shift from AI4EDA towards AI-native EDA, integrating AI at the core of the design process. Pivotal to this vision is the development of a multimodal circuit representation learning technique, poised to provide a comprehensive understanding by harmonizing and extracting insights from varied data sources, such as functional specifications, RTL designs, circuit netlists, and physical layouts. We champion the creation of large circuit models (LCMs) that are inherently multimodal, crafted to decode and express the rich semantics and structures of circuit data, thus fostering more resilient, efficient, and inventive design methodologies. Embracing this AI-native philosophy, we foresee a trajectory that transcends the current innovation plateau in EDA, igniting a profound shift-left in electronic design methodology. The envisioned advancements herald not just an evolution of existing EDA tools but a revolution, giving rise to novel instruments of design tools that promise to radically enhance design productivity and inaugurate a new epoch where the optimization of circuit performance, power, and area (PPA) is achieved not incrementally, but through leaps that redefine the benchmarks of electronic systems' capabilities.
△ Less
Submitted 1 May, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Inverse Garment and Pattern Modeling with a Differentiable Simulator
Authors:
Boyang Yu,
Frederic Cordier,
Hyewon Seo
Abstract:
The capability to generate simulation-ready garment models from 3D shapes of clothed humans will significantly enhance the interpretability of captured geometry of real garments, as well as their faithful reproduction in the virtual world. This will have notable impact on fields like shape capture in social VR, and virtual try-on in the fashion industry. To align with the garment modeling process…
▽ More
The capability to generate simulation-ready garment models from 3D shapes of clothed humans will significantly enhance the interpretability of captured geometry of real garments, as well as their faithful reproduction in the virtual world. This will have notable impact on fields like shape capture in social VR, and virtual try-on in the fashion industry. To align with the garment modeling process standardized by the fashion industry as well as cloth simulation softwares, it is required to recover 2D patterns. This involves an inverse garment design problem, which is the focus of our work here: Starting with an arbitrary target garment geometry, our system estimates an animatable garment model by automatically adjusting its corresponding 2D template pattern, along with the material parameters of the physics-based simulation (PBS). Built upon a differentiable cloth simulator, the optimization process is directed towards minimizing the deviation of the simulated garment shape from the target geometry. Moreover, our produced patterns meet manufacturing requirements such as left-to-right-symmetry, making them suited for reverse garment fabrication. We validate our approach on examples of different garment types, and show that our method faithfully reproduces both the draped garment shape and the sewing pattern.
△ Less
Submitted 15 March, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Determination of the number of $ψ(3686)$ events taken at BESIII
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (639 additional authors not shown)
Abstract:
The number of $ψ(3686)$ events collected by the BESIII detector during the 2021 run period is determined to be $(2259.3\pm 11.1)\times 10^6$ by counting inclusive $ψ(3686)$ hadronic events. The uncertainty is systematic and the statistical uncertainty is negligible. Meanwhile, the numbers of $ψ(3686)$ events collected during the 2009 and 2012 run periods are updated to be…
▽ More
The number of $ψ(3686)$ events collected by the BESIII detector during the 2021 run period is determined to be $(2259.3\pm 11.1)\times 10^6$ by counting inclusive $ψ(3686)$ hadronic events. The uncertainty is systematic and the statistical uncertainty is negligible. Meanwhile, the numbers of $ψ(3686)$ events collected during the 2009 and 2012 run periods are updated to be $(107.7\pm0.6)\times 10^6$ and $(345.4\pm 2.6)\times 10^6$, respectively. Both numbers are consistent with the previous measurements within one standard deviation. The total number of $ψ(3686)$ events in the three data samples is $(2712.4\pm14.3)\times10^6$.
△ Less
Submitted 28 May, 2024; v1 submitted 11 March, 2024;
originally announced March 2024.
-
Observation of the decay $h_{c}\to3(π^{+}π^{-})π^{0}$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (639 additional authors not shown)
Abstract:
Based on $(2712.4\pm14.1)\times10^{6}$ $ψ(3686)$ events collected with the BESIII detector, we study the decays $h_{c}\to3(π^{+}π^{-})π^{0}$, $h_{c}\to2(π^{+}π^{-})ω$, $h_{c}\to2(π^{+}π^{-})π^{0}η$, $h_{c}\to2(π^{+}π^{-})η$, and $h_{c}\to p\bar{p}$ via $ψ(3686)\toπ^{0}h_{c}$. The decay channel $h_{c}\to3(π^{+}π^{-})π^{0}$ is observed for the first time, and its branching fraction is determined to…
▽ More
Based on $(2712.4\pm14.1)\times10^{6}$ $ψ(3686)$ events collected with the BESIII detector, we study the decays $h_{c}\to3(π^{+}π^{-})π^{0}$, $h_{c}\to2(π^{+}π^{-})ω$, $h_{c}\to2(π^{+}π^{-})π^{0}η$, $h_{c}\to2(π^{+}π^{-})η$, and $h_{c}\to p\bar{p}$ via $ψ(3686)\toπ^{0}h_{c}$. The decay channel $h_{c}\to3(π^{+}π^{-})π^{0}$ is observed for the first time, and its branching fraction is determined to be $\left( {9.28\pm 1.14 \pm 0.77} \right) \times {10^{ - 3}}$, where the first uncertainty is statistical and the second is systematic. In addition, first evidence is found for the modes $h_{c} \to 2(π^{+}π^{-})π^{0}η$ and $h_{c}\to2(π^{+}π^{-})ω$ with significances of 4.8$σ$ and 4.7$σ$, and their branching fractions are determined to be $(7.55\pm1.51\pm0.77)\times10^{-3}$ and $\left( {4.00 \pm 0.86 \pm 0.35}\right) \times {10^{ - 3}}$, respectively. No significant signals of $h_c\to 2(π^+π^-)η$ and $h_{c}\to p\bar{p}$ are observed, and the upper limits of the branching fractions of these decays are determined to be $<6.19\times10^{-4}$ and $<4.40\times10^{-5}$ at the 90% confidence level, respectively.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Pre-trained Model-based Actionable Warning Identification: A Feasibility Study
Authors:
Xiuting Ge,
Chunrong Fang,
Quanjun Zhang,
Daoyuan Wu,
Bowen Yu,
Qirui Zheng,
An Guo,
Shangwei Lin,
Zhihong Zhao,
Yang Liu,
Zhenyu Chen
Abstract:
Actionable Warning Identification (AWI) plays a pivotal role in improving the usability of static code analyzers. Currently, Machine Learning (ML)-based AWI approaches, which mainly learn an AWI classifier from labeled warnings, are notably common. However, these approaches still face the problem of restricted performance due to the direct reliance on a limited number of labeled warnings to develo…
▽ More
Actionable Warning Identification (AWI) plays a pivotal role in improving the usability of static code analyzers. Currently, Machine Learning (ML)-based AWI approaches, which mainly learn an AWI classifier from labeled warnings, are notably common. However, these approaches still face the problem of restricted performance due to the direct reliance on a limited number of labeled warnings to develop a classifier. Very recently, Pre-Trained Models (PTMs), which have been trained through billions of text/code tokens and demonstrated substantial success applications on various code-related tasks, could potentially circumvent the above problem. Nevertheless, the performance of PTMs on AWI has not been systematically investigated, leaving a gap in understanding their pros and cons. In this paper, we are the first to explore the feasibility of applying various PTMs for AWI. By conducting the extensive evaluation on 10K+ SpotBugs warnings from 10 large-scale and open-source projects, we observe that all studied PTMs are consistently 9.85%~21.12% better than the state-of-the-art ML-based AWI approaches. Besides, we investigate the impact of three primary aspects (i.e., data preprocessing, model training, and model prediction) in the typical PTM-based AWI workflow. Further, we identify the reasons for current PTMs' underperformance on AWI. Based on our findings, we provide several practical guidelines to enhance PTM-based AWI in future work.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
The Minimum Information about CLinical Artificial Intelligence Checklist for Generative Modeling Research (MI-CLAIM-GEN)
Authors:
Brenda Y. Miao,
Irene Y. Chen,
Christopher YK Williams,
Jaysón Davidson,
Augusto Garcia-Agundez,
Shenghuan Sun,
Travis Zack,
Suchi Saria,
Rima Arnaout,
Giorgio Quer,
Hossein J. Sadaei,
Ali Torkamani,
Brett Beaulieu-Jones,
Bin Yu,
Milena Gianfrancesco,
Atul J. Butte,
Beau Norgeot,
Madhumita Sushil
Abstract:
Recent advances in generative models, including large language models (LLMs), vision language models (VLMs), and diffusion models, have accelerated the field of natural language and image processing in medicine and marked a significant paradigm shift in how biomedical models can be developed and deployed. While these models are highly adaptable to new tasks, scaling and evaluating their usage pres…
▽ More
Recent advances in generative models, including large language models (LLMs), vision language models (VLMs), and diffusion models, have accelerated the field of natural language and image processing in medicine and marked a significant paradigm shift in how biomedical models can be developed and deployed. While these models are highly adaptable to new tasks, scaling and evaluating their usage presents new challenges not addressed in previous frameworks. In particular, the ability of these models to produce useful outputs with little to no specialized training data ("zero-" or "few-shot" approaches), as well as the open-ended nature of their outputs, necessitate the development of new guidelines for robust reporting of clinical generative model research. In response to gaps in standards and best practices for the development of clinical AI tools identified by US Executive Order 141103 and several emerging national networks for clinical AI evaluation, we begin to formalize some of these guidelines by building on the original MI-CLAIM checklist. The new checklist, MI-CLAIM-GEN (Table 1), aims to address differences in training, evaluation, interpretability, and reproducibility of new generative models compared to non-generative ("predictive") AI models. This MI-CLAIM-GEN checklist also seeks to clarify cohort selection reporting with unstructured clinical data and adds additional items on alignment with ethical standards for clinical AI research.
△ Less
Submitted 11 July, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Observation of $ψ(3686)\to 3φ$
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
X. C. Ai,
R. Aliberti,
A. Amoroso,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
H. -R. Bao,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere
, et al. (645 additional authors not shown)
Abstract:
Using $(2.712\pm0.014)\times 10^9$ $ψ(3686)$ events collected by the BESIII detector operating at the BEPCII collider, we report the first observation of $ψ(3686)\to 3φ$ decay with a significance larger than 10$σ$. The branching fraction of this decay is determined to be $(1.46\pm0.05\pm0.17)\times10^{-5}$, where the first uncertainty is statistical and the second is systematic. No significant str…
▽ More
Using $(2.712\pm0.014)\times 10^9$ $ψ(3686)$ events collected by the BESIII detector operating at the BEPCII collider, we report the first observation of $ψ(3686)\to 3φ$ decay with a significance larger than 10$σ$. The branching fraction of this decay is determined to be $(1.46\pm0.05\pm0.17)\times10^{-5}$, where the first uncertainty is statistical and the second is systematic. No significant structure is observed in the $φφ$ invariant mass spectra.
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
Self-Retrieval: Building an Information Retrieval System with One Large Language Model
Authors:
Qiaoyu Tang,
Jiawei Chen,
Bowen Yu,
Yaojie Lu,
Cheng Fu,
Haiyang Yu,
Hongyu Lin,
Fei Huang,
Ben He,
Xianpei Han,
Le Sun,
Yongbin Li
Abstract:
The rise of large language models (LLMs) has transformed the role of information retrieval (IR) systems in the way to humans accessing information. Due to the isolated architecture and the limited interaction, existing IR systems are unable to fully accommodate the shift from directly providing information to humans to indirectly serving large language models. In this paper, we propose Self-Retrie…
▽ More
The rise of large language models (LLMs) has transformed the role of information retrieval (IR) systems in the way to humans accessing information. Due to the isolated architecture and the limited interaction, existing IR systems are unable to fully accommodate the shift from directly providing information to humans to indirectly serving large language models. In this paper, we propose Self-Retrieval, an end-to-end, LLM-driven information retrieval architecture that can fully internalize the required abilities of IR systems into a single LLM and deeply leverage the capabilities of LLMs during IR process. Specifically, Self-retrieval internalizes the corpus to retrieve into a LLM via a natural language indexing architecture. Then the entire retrieval process is redefined as a procedure of document generation and self-assessment, which can be end-to-end executed using a single large language model. Experimental results demonstrate that Self-Retrieval not only significantly outperforms previous retrieval approaches by a large margin, but also can significantly boost the performance of LLM-driven downstream applications like retrieval augumented generation.
△ Less
Submitted 23 February, 2024;
originally announced March 2024.
-
Classes Are Not Equal: An Empirical Study on Image Recognition Fairness
Authors:
Jiequan Cui,
Beier Zhu,
Xin Wen,
Xiaojuan Qi,
Bei Yu,
Hanwang Zhang
Abstract:
In this paper, we present an empirical study on image recognition fairness, i.e., extreme class accuracy disparity on balanced data like ImageNet. We experimentally demonstrate that classes are not equal and the fairness issue is prevalent for image classification models across various datasets, network architectures, and model capacities. Moreover, several intriguing properties of fairness are id…
▽ More
In this paper, we present an empirical study on image recognition fairness, i.e., extreme class accuracy disparity on balanced data like ImageNet. We experimentally demonstrate that classes are not equal and the fairness issue is prevalent for image classification models across various datasets, network architectures, and model capacities. Moreover, several intriguing properties of fairness are identified. First, the unfairness lies in problematic representation rather than classifier bias. Second, with the proposed concept of Model Prediction Bias, we investigate the origins of problematic representation during optimization. Our findings reveal that models tend to exhibit greater prediction biases for classes that are more challenging to recognize. It means that more other classes will be confused with harder classes. Then the False Positives (FPs) will dominate the learning in optimization, thus leading to their poor accuracy. Further, we conclude that data augmentation and representation learning algorithms improve overall performance by promoting fairness to some degree in image classification. The Code is available at https://github.com/dvlab-research/Parametric-Contrastive-Learning.
△ Less
Submitted 12 March, 2024; v1 submitted 28 February, 2024;
originally announced February 2024.
-
SoFA: Shielded On-the-fly Alignment via Priority Rule Following
Authors:
Xinyu Lu,
Bowen Yu,
Yaojie Lu,
Hongyu Lin,
Haiyang Yu,
Le Sun,
Xianpei Han,
Yongbin Li
Abstract:
The alignment problem in Large Language Models (LLMs) involves adapting them to the broad spectrum of human values. This requirement challenges existing alignment methods due to diversity of preferences and regulatory standards. This paper introduces a novel alignment paradigm, priority rule following, which defines rules as the primary control mechanism in each dialog, prioritizing them over user…
▽ More
The alignment problem in Large Language Models (LLMs) involves adapting them to the broad spectrum of human values. This requirement challenges existing alignment methods due to diversity of preferences and regulatory standards. This paper introduces a novel alignment paradigm, priority rule following, which defines rules as the primary control mechanism in each dialog, prioritizing them over user instructions. Our preliminary analysis reveals that even the advanced LLMs, such as GPT-4, exhibit shortcomings in understanding and prioritizing the rules. Therefore, we present PriorityDistill, a semi-automated approach for distilling priority following signals from LLM simulations to ensure robust rule integration and adherence. Our experiments show that this method not only effectively minimizes misalignments utilizing only one general rule but also adapts smoothly to various unseen rules, ensuring they are shielded from hijacking and that the model responds appropriately.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Large Stepsize Gradient Descent for Logistic Loss: Non-Monotonicity of the Loss Improves Optimization Efficiency
Authors:
Jingfeng Wu,
Peter L. Bartlett,
Matus Telgarsky,
Bin Yu
Abstract:
We consider gradient descent (GD) with a constant stepsize applied to logistic regression with linearly separable data, where the constant stepsize $η$ is so large that the loss initially oscillates. We show that GD exits this initial oscillatory phase rapidly -- in $\mathcal{O}(η)$ steps -- and subsequently achieves an $\tilde{\mathcal{O}}(1 / (ηt) )$ convergence rate after $t$ additional steps.…
▽ More
We consider gradient descent (GD) with a constant stepsize applied to logistic regression with linearly separable data, where the constant stepsize $η$ is so large that the loss initially oscillates. We show that GD exits this initial oscillatory phase rapidly -- in $\mathcal{O}(η)$ steps -- and subsequently achieves an $\tilde{\mathcal{O}}(1 / (ηt) )$ convergence rate after $t$ additional steps. Our results imply that, given a budget of $T$ steps, GD can achieve an accelerated loss of $\tilde{\mathcal{O}}(1/T^2)$ with an aggressive stepsize $η:= Θ( T)$, without any use of momentum or variable stepsize schedulers. Our proof technique is versatile and also handles general classification loss functions (where exponential tails are needed for the $\tilde{\mathcal{O}}(1/T^2)$ acceleration), nonlinear predictors in the neural tangent kernel regime, and online stochastic gradient descent (SGD) with a large stepsize, under suitable separability conditions.
△ Less
Submitted 9 June, 2024; v1 submitted 24 February, 2024;
originally announced February 2024.
-
Detailed Report on the Measurement of the Positive Muon Anomalous Magnetic Moment to 0.20 ppm
Authors:
D. P. Aguillard,
T. Albahri,
D. Allspach,
A. Anisenkov,
K. Badgley,
S. Baeßler,
I. Bailey,
L. Bailey,
V. A. Baranov,
E. Barlas-Yucel,
T. Barrett,
E. Barzi,
F. Bedeschi,
M. Berz,
M. Bhattacharya,
H. P. Binney,
P. Bloom,
J. Bono,
E. Bottalico,
T. Bowcock,
S. Braun,
M. Bressler,
G. Cantatore,
R. M. Carey,
B. C. K. Casey
, et al. (168 additional authors not shown)
Abstract:
We present details on a new measurement of the muon magnetic anomaly, $a_μ= (g_μ-2)/2$. The result is based on positive muon data taken at Fermilab's Muon Campus during the 2019 and 2020 accelerator runs. The measurement uses $3.1$ GeV$/c$ polarized muons stored in a $7.1$-m-radius storage ring with a $1.45$ T uniform magnetic field. The value of $ a_μ$ is determined from the measured difference b…
▽ More
We present details on a new measurement of the muon magnetic anomaly, $a_μ= (g_μ-2)/2$. The result is based on positive muon data taken at Fermilab's Muon Campus during the 2019 and 2020 accelerator runs. The measurement uses $3.1$ GeV$/c$ polarized muons stored in a $7.1$-m-radius storage ring with a $1.45$ T uniform magnetic field. The value of $ a_μ$ is determined from the measured difference between the muon spin precession frequency and its cyclotron frequency. This difference is normalized to the strength of the magnetic field, measured using Nuclear Magnetic Resonance (NMR). The ratio is then corrected for small contributions from beam motion, beam dispersion, and transient magnetic fields. We measure $a_μ= 116 592 057 (25) \times 10^{-11}$ (0.21 ppm). This is the world's most precise measurement of this quantity and represents a factor of $2.2$ improvement over our previous result based on the 2018 dataset. In combination, the two datasets yield $a_μ(\text{FNAL}) = 116 592 055 (24) \times 10^{-11}$ (0.20 ppm). Combining this with the measurements from Brookhaven National Laboratory for both positive and negative muons, the new world average is $a_μ$(exp) $ = 116 592 059 (22) \times 10^{-11}$ (0.19 ppm).
△ Less
Submitted 22 May, 2024; v1 submitted 23 February, 2024;
originally announced February 2024.
-
ED-Copilot: Reduce Emergency Department Wait Time with Language Model Diagnostic Assistance
Authors:
Liwen Sun,
Abhineet Agarwal,
Aaron Kornblith,
Bin Yu,
Chenyan Xiong
Abstract:
In the emergency department (ED), patients undergo triage and multiple laboratory tests before diagnosis. This time-consuming process causes ED crowding which impacts patient mortality, medical errors, staff burnout, etc. This work proposes (time) cost-effective diagnostic assistance that leverages artificial intelligence systems to help ED clinicians make efficient and accurate diagnoses. In coll…
▽ More
In the emergency department (ED), patients undergo triage and multiple laboratory tests before diagnosis. This time-consuming process causes ED crowding which impacts patient mortality, medical errors, staff burnout, etc. This work proposes (time) cost-effective diagnostic assistance that leverages artificial intelligence systems to help ED clinicians make efficient and accurate diagnoses. In collaboration with ED clinicians, we use public patient data to curate MIMIC-ED-Assist, a benchmark for AI systems to suggest laboratory tests that minimize wait time while accurately predicting critical outcomes such as death. With MIMIC-ED-Assist, we develop ED-Copilot which sequentially suggests patient-specific laboratory tests and makes diagnostic predictions. ED-Copilot employs a pre-trained bio-medical language model to encode patient information and uses reinforcement learning to minimize ED wait time and maximize prediction accuracy. On MIMIC-ED-Assist, ED-Copilot improves prediction accuracy over baselines while halving average wait time from four hours to two hours. ED-Copilot can also effectively personalize treatment recommendations based on patient severity, further highlighting its potential as a diagnostic assistant. Since MIMIC-ED-Assist is a retrospective benchmark, ED-Copilot is restricted to recommend only observed tests. We show ED-Copilot achieves competitive performance without this restriction as the maximum allowed time increases. Our code is available at https://github.com/cxcscmu/ED-Copilot.
△ Less
Submitted 27 May, 2024; v1 submitted 20 February, 2024;
originally announced February 2024.
-
Healthcare Copilot: Eliciting the Power of General LLMs for Medical Consultation
Authors:
Zhiyao Ren,
Yibing Zhan,
Baosheng Yu,
Liang Ding,
Dacheng Tao
Abstract:
The copilot framework, which aims to enhance and tailor large language models (LLMs) for specific complex tasks without requiring fine-tuning, is gaining increasing attention from the community. In this paper, we introduce the construction of a Healthcare Copilot designed for medical consultation. The proposed Healthcare Copilot comprises three main components: 1) the Dialogue component, responsib…
▽ More
The copilot framework, which aims to enhance and tailor large language models (LLMs) for specific complex tasks without requiring fine-tuning, is gaining increasing attention from the community. In this paper, we introduce the construction of a Healthcare Copilot designed for medical consultation. The proposed Healthcare Copilot comprises three main components: 1) the Dialogue component, responsible for effective and safe patient interactions; 2) the Memory component, storing both current conversation data and historical patient information; and 3) the Processing component, summarizing the entire dialogue and generating reports. To evaluate the proposed Healthcare Copilot, we implement an auto-evaluation scheme using ChatGPT for two roles: as a virtual patient engaging in dialogue with the copilot, and as an evaluator to assess the quality of the dialogue. Extensive results demonstrate that the proposed Healthcare Copilot significantly enhances the capabilities of general LLMs for medical consultations in terms of inquiry capability, conversational fluency, response accuracy, and safety. Furthermore, we conduct ablation studies to highlight the contribution of each individual module in the Healthcare Copilot. Code will be made publicly available on GitHub.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
LoRA+: Efficient Low Rank Adaptation of Large Models
Authors:
Soufiane Hayou,
Nikhil Ghosh,
Bin Yu
Abstract:
In this paper, we show that Low Rank Adaptation (LoRA) as originally introduced in Hu et al. (2021) leads to suboptimal finetuning of models with large width (embedding dimension). This is due to the fact that adapter matrices A and B in LoRA are updated with the same learning rate. Using scaling arguments for large width networks, we demonstrate that using the same learning rate for A and B does…
▽ More
In this paper, we show that Low Rank Adaptation (LoRA) as originally introduced in Hu et al. (2021) leads to suboptimal finetuning of models with large width (embedding dimension). This is due to the fact that adapter matrices A and B in LoRA are updated with the same learning rate. Using scaling arguments for large width networks, we demonstrate that using the same learning rate for A and B does not allow efficient feature learning. We then show that this suboptimality of LoRA can be corrected simply by setting different learning rates for the LoRA adapter matrices A and B with a well-chosen ratio. We call this proposed algorithm LoRA$+$. In our extensive experiments, LoRA$+$ improves performance (1-2 $\%$ improvements) and finetuning speed (up to $\sim$ 2X SpeedUp), at the same computational cost as LoRA.
△ Less
Submitted 4 July, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
DiLA: Enhancing LLM Tool Learning with Differential Logic Layer
Authors:
Yu Zhang,
Hui-Ling Zhen,
Zehua Pei,
Yingzhao Lian,
Lihao Yin,
Mingxuan Yuan,
Bei Yu
Abstract:
Considering the challenges faced by large language models (LLMs) in logical reasoning and planning, prior efforts have sought to augment LLMs with access to external solvers. While progress has been made on simple reasoning problems, solving classical constraint satisfaction problems, such as the Boolean Satisfiability Problem (SAT) and Graph Coloring Problem (GCP), remains difficult for off-the-s…
▽ More
Considering the challenges faced by large language models (LLMs) in logical reasoning and planning, prior efforts have sought to augment LLMs with access to external solvers. While progress has been made on simple reasoning problems, solving classical constraint satisfaction problems, such as the Boolean Satisfiability Problem (SAT) and Graph Coloring Problem (GCP), remains difficult for off-the-shelf solvers due to their intricate expressions and exponential search spaces. In this paper, we propose a novel differential logic layer-aided language modeling (DiLA) approach, where logical constraints are integrated into the forward and backward passes of a network layer, to provide another option for LLM tool learning. In DiLA, LLM aims to transform the language description to logic constraints and identify initial solutions of the highest quality, while the differential logic layer focuses on iteratively refining the LLM-prompted solution. Leveraging the logic layer as a bridge, DiLA enhances the logical reasoning ability of LLMs on a range of reasoning problems encoded by Boolean variables, guaranteeing the efficiency and correctness of the solution process. We evaluate the performance of DiLA on two classic reasoning problems and empirically demonstrate its consistent outperformance against existing prompt-based and solver-aided approaches.
△ Less
Submitted 18 June, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
Search for the production of deuterons and antideuterons in e^+e^- annihilation at center-of-mass energies between 4.13 and 4.70 GeV
Authors:
BESIII Collaboration,
M. Ablikim,
M. N. Achasov,
P. Adlarson,
O. Afedulidis,
R. Aliberti,
A. Amoroso,
M. R. An,
Q. An,
Y. Bai,
O. Bakina,
I. Balossino,
Y. Ban,
V. Batozskaya,
K. Begzsuren,
N. Berger,
M. Berlowski,
M. Bertani,
D. Bettoni,
F. Bianchi,
E. Bianco,
A. Bortone,
I. Boyko,
R. A. Briere,
A. Brueggemann
, et al. (593 additional authors not shown)
Abstract:
Using a data sample of $e^+e^-$ collision data corresponding to an integrated luminosity of 19 fb$^{-1}$ collected with the BESIII detector at the BEPCII collider, we search for the production of deuterons and antideuterons via $e^+e^-\to ppπ^-\bar{d}+c.c.$ for the first time at center-of-mass energies between 4.13 and 4.70 GeV. No significant signal is observed and the upper limit of the…
▽ More
Using a data sample of $e^+e^-$ collision data corresponding to an integrated luminosity of 19 fb$^{-1}$ collected with the BESIII detector at the BEPCII collider, we search for the production of deuterons and antideuterons via $e^+e^-\to ppπ^-\bar{d}+c.c.$ for the first time at center-of-mass energies between 4.13 and 4.70 GeV. No significant signal is observed and the upper limit of the $e^+e^-\to ppπ^-\bar{d}+c.c.$ cross section is determined to be from 9.0 to 145 fb depending on the center-of-mass energy at the $90\%$ confidence level.
△ Less
Submitted 17 February, 2024;
originally announced February 2024.
-
Passive Aperiodic Optical Phased Array based on Uniform Random Shuffle
Authors:
Bowen Yu,
Dachuan Wu,
Yasha Yi
Abstract:
Grating lobes arise from the periodic nature of element spacing in the optical phased array. Essentially, the phased array performs the Spatial Fourier Transform on light; the steering capability of the main lobe is governed by phase shift variations among waveguides, and the Sidelobe Suppression Ratio (SLSR) correlates with the uniformity of emitter positions. Leveraging this understanding, we ha…
▽ More
Grating lobes arise from the periodic nature of element spacing in the optical phased array. Essentially, the phased array performs the Spatial Fourier Transform on light; the steering capability of the main lobe is governed by phase shift variations among waveguides, and the Sidelobe Suppression Ratio (SLSR) correlates with the uniformity of emitter positions. Leveraging this understanding, we have optimized a 1x64 channel passive aperiodic OPAs with the uniform random shuffle in the emitter's position. Our conceptual simulations highlight a robust steering capability (18.60° / 10nm) and SLSR (-13.46 dB @ 0° / -8.27 dB @ +/-45°), and initial measurements demonstrate the steering capability (9.8 ° / 10nm, with smaller phase shifts design) and SLSR (-6.1dB @ -33.4°) from the preliminary fabrication.
△ Less
Submitted 30 January, 2024;
originally announced February 2024.
-
LlaSMol: Advancing Large Language Models for Chemistry with a Large-Scale, Comprehensive, High-Quality Instruction Tuning Dataset
Authors:
Botao Yu,
Frazier N. Baker,
Ziqi Chen,
Xia Ning,
Huan Sun
Abstract:
Chemistry plays a crucial role in many domains, such as drug discovery and material science. While large language models (LLMs) such as GPT-4 exhibit remarkable capabilities on natural language processing tasks, existing research indicates that their performance on chemistry tasks is discouragingly low. In this paper, however, we demonstrate that our developed LLMs can achieve very strong results…
▽ More
Chemistry plays a crucial role in many domains, such as drug discovery and material science. While large language models (LLMs) such as GPT-4 exhibit remarkable capabilities on natural language processing tasks, existing research indicates that their performance on chemistry tasks is discouragingly low. In this paper, however, we demonstrate that our developed LLMs can achieve very strong results on a comprehensive set of chemistry tasks, outperforming the most advanced GPT-4 and Claude 3 Opus by a substantial margin. To accomplish this, we propose SMolInstruct, a large-scale, comprehensive, and high-quality dataset for instruction tuning. It contains 14 selected chemistry tasks and over three million samples, laying a solid foundation for training and evaluating LLMs for chemistry. Using SMolInstruct, we fine-tune a set of open-source LLMs, among which, we find that Mistral serves as the best base model for chemistry tasks. Our analysis further demonstrates the critical role of the proposed dataset in driving the performance improvements.
△ Less
Submitted 10 August, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
Axion dark matter from inflation-driven quantum phase transition
Authors:
Ameen Ismail,
Seung J. Lee,
Bingrong Yu
Abstract:
We propose a new mechanism to produce axion dark matter from inflationary fluctuations. Quantum fluctuations during inflation are strengthened by a coupling of the axion kinetic term to the inflaton, which we parametrize as an effective curvature $κ$ in the axion equation of motion. A nonvanishing curvature breaks the scale invariance of the axion power spectrum, driving a quantum phase transition…
▽ More
We propose a new mechanism to produce axion dark matter from inflationary fluctuations. Quantum fluctuations during inflation are strengthened by a coupling of the axion kinetic term to the inflaton, which we parametrize as an effective curvature $κ$ in the axion equation of motion. A nonvanishing curvature breaks the scale invariance of the axion power spectrum, driving a quantum phase transition with $κ$ as the order parameter. The axion power spectrum is proportional to the inverse comoving horizon to the power of $κ$. For positive $κ$ the spectrum gets a red tilt, leading to an exponential enhancement of the axion abundance as the comoving horizon shrinks during inflation. This enhancement allows sufficient axion production to comprise the entire dark matter relic abundance despite the ultralight mass. Our mechanism predicts a significantly different parameter space from the usual misalignment mechanism. It allows for axion-like particle dark matter with a much lower decay constant and thus a larger coupling to Standard Model particles. Much of the parameter space can be probed by future experiments including haloscopes, nuclear clocks, CASPEr, and CMB-S4. We can also generate heavier QCD axion dark matter than the misalignment mechanism.
△ Less
Submitted 15 March, 2024; v1 submitted 13 February, 2024;
originally announced February 2024.
-
Localizing axial dense emitters based on single-helix point spread function and deep learning
Authors:
Yihong Ji,
Danni Chen,
Hanzhe Wu,
Gan Xiang,
Heng Li,
Bin Yu,
Junle Qu
Abstract:
Stimulated Emission Depletion Microscopy (STED) can achieve a spatial resolution as high as several nanometers. As a point scanning imaging method, it requires 3D scanning to complete the imaging of 3D samples. The time-consuming 3D scanning can be compressed into a 2D one in the non-diffracting Bessel-Bessel STED (BB-STED) where samples are effectively excited by an optical needle. However, the i…
▽ More
Stimulated Emission Depletion Microscopy (STED) can achieve a spatial resolution as high as several nanometers. As a point scanning imaging method, it requires 3D scanning to complete the imaging of 3D samples. The time-consuming 3D scanning can be compressed into a 2D one in the non-diffracting Bessel-Bessel STED (BB-STED) where samples are effectively excited by an optical needle. However, the image is just the 2D projection, i.e., there is no real axial resolution. Therefore, we propose a method to encode axial information to axially dense emitters by using a detection optical path with single-helix point spread function (SH-PSF), and then predicted the depths of the emitters by means of deep learning. Simulation demonstrated that, for a density 1~ 20 emitters in a depth range of 4 nm, an axial precision of ~35 nm can be achieved. Our method also works for experimental data, and an axial precision of ~63 nm can be achieved.
△ Less
Submitted 5 March, 2024; v1 submitted 9 February, 2024;
originally announced February 2024.
-
The existence of arbitrary large number of non-$\mathbb R$-covered Anosov flows on hyperbolic $3$-manifolds
Authors:
Francois Béguin,
Bin Yu
Abstract:
The purpose of this paper is to prove that, for every $n\in \mathbb N$, there exists a closed hyperbolic $3$-manifold $M$ which carries at least $n$ non-$\mathbb R$-covered Anosov flows, that are pariwise non-orbitally equivalent. Due to a recent result by Fenley, such Anosov flows are quasi-geodesic. Hence, we get the existence of hyperbolic $3$-manifolds carrying many pairwise non-orbitally equi…
▽ More
The purpose of this paper is to prove that, for every $n\in \mathbb N$, there exists a closed hyperbolic $3$-manifold $M$ which carries at least $n$ non-$\mathbb R$-covered Anosov flows, that are pariwise non-orbitally equivalent. Due to a recent result by Fenley, such Anosov flows are quasi-geodesic. Hence, we get the existence of hyperbolic $3$-manifolds carrying many pairwise non-orbitally equivalent quasi-geodesic Anosov flows. In order to prove that the flows we construct are not orbitally equivalent, we prove that some patterns of the bi-foliation of the orbit space are not destroyed by Dehn-Fried surgeries, and yield to new dynamical invariants. We believe that those dynamical invariants could be used in a much wider context.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.