-
Preparation of iron STM tips suitable for room temperature spectroscopy
Authors:
Jȩdrzej Tepper,
Jan M. van Ruitenbeek
Abstract:
A method for preparing Fe tips suitable for spectroscopy in a room temperature ultra-high vacuum system is presented.
A method for preparing Fe tips suitable for spectroscopy in a room temperature ultra-high vacuum system is presented.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Spin conductances and magnetization production in chiral molecular junctions
Authors:
Richard Korytár,
Jan M. van Ruitenbeek,
Ferdinand Evers
Abstract:
Motivated by experimental reports on chirality induced spin selectivity, we investigate a minimal model that allows us to calculate the charge and spin conductances through helical molecules analytically. The spin-orbit interaction is assumed to be non-vanishing on the molecule and negligible in the reservoirs (leads). The band-structure of the molecule features four helical modes with spin-moment…
▽ More
Motivated by experimental reports on chirality induced spin selectivity, we investigate a minimal model that allows us to calculate the charge and spin conductances through helical molecules analytically. The spin-orbit interaction is assumed to be non-vanishing on the molecule and negligible in the reservoirs (leads). The band-structure of the molecule features four helical modes with spin-momentum locking that are analogous of edge-currents in the quantum spin Hall effect. While charge is conserved and therefore the charge current is independent of where it is measured, - reservoirs or molecule, - our detailed calculations reveal that the spin currents in the left and right lead are equal in magnitudes but with opposite signs (in linear response).
We predict that transport currents flowing through helical molecules are accompanied by a spin accumulation in the contact region with the same magnetization direction for source and drain. Further, we predict that the spin-conductance can be extracted directly from measuring the (quasi-static) spin accumulation - rather than the spin current itself, which is very challenging to obtain experimentally.
△ Less
Submitted 28 August, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Chirality-controlled spin scattering through quantum interference
Authors:
Jan M. van Ruitenbeek,
Richard Korytár,
Ferdinand Evers
Abstract:
Chirality-induced spin selectivity has been reported in many experiments, but a generally accepted theoretical explanation has not yet been proposed. Here, we introduce a simple model system of a straight cylindrical free-electron wire, containing a helical string of atomic scattering centers, with spin-orbit interaction. The advantage of this simple model is that it allows deriving analytical exp…
▽ More
Chirality-induced spin selectivity has been reported in many experiments, but a generally accepted theoretical explanation has not yet been proposed. Here, we introduce a simple model system of a straight cylindrical free-electron wire, containing a helical string of atomic scattering centers, with spin-orbit interaction. The advantage of this simple model is that it allows deriving analytical expressions for the spin scattering rates, such that the origin of the effect can be easily followed. We find that spin-selective scattering can be viewed as resulting from constructive interference of partial waves scattered by the spin-orbit terms. We demonstrate that forward scattering rates are independent of spin, while back scattering is spin dependent over wide windows of energy. Although the model does not represent the full details of electron transmission through chiral molecules, it clearly reveals a mechanism that could operate in chiral systems.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Dynamic bonding influenced by the proximity of adatoms to one-atom high step edges
Authors:
W. Dednam,
S. Tewari,
E. B. Lombardi,
J. J. Palacios,
J. M. van Ruitenbeek,
C. Sabater
Abstract:
Low-temperature scanning tunneling microscopy is used here to study dynamic bonding of gold atoms on surfaces under low coordination conditions. In the experiments, using an atomically-sharp gold tip, a gold adatom is deposited onto a gold surface with atomic precision either on the first hollow site near a step edge, or far away from it. Classical molecular dynamics simulations at 4.2 K and densi…
▽ More
Low-temperature scanning tunneling microscopy is used here to study dynamic bonding of gold atoms on surfaces under low coordination conditions. In the experiments, using an atomically-sharp gold tip, a gold adatom is deposited onto a gold surface with atomic precision either on the first hollow site near a step edge, or far away from it. Classical molecular dynamics simulations at 4.2 K and density functional theory calculations serve to elucidate the difference in the bonding behavior between these two different placements, while also providing information on the crystalline classification of the STM tips based on their experimental performance.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
Theory of Chirality Induced Spin Selectivity: Progress and Challenges
Authors:
Ferdinand Evers,
Amnon Aharony,
Nir Bar-Gill,
Ora Entin-Wohlman,
Per Hedegård,
Oded Hod,
Pavel Jelinek,
Grzegorz Kamieniarz,
Mikhail Lemeshko,
Karen Michaeli,
Vladimiro Mujica,
Ron Naaman,
Yossi Paltiel,
Sivan Refaely-Abramson,
Oren Tal,
Jos Thijssen,
Michael Thoss,
Jan M. van Ruitenbeek,
Latha Venkataraman,
David H. Waldeck,
Binghai Yan,
Leeor Kronik
Abstract:
We provide a critical overview of the theory of the chirality-induced spin selectivity (CISS) effect, i.e., phenomena in which the chirality of molecular species imparts significant spin selectivity to various electron processes. Based on discussions in a recently held workshop, and further work published since, we review the status of CISS effects - in electron transmission, electron transport, a…
▽ More
We provide a critical overview of the theory of the chirality-induced spin selectivity (CISS) effect, i.e., phenomena in which the chirality of molecular species imparts significant spin selectivity to various electron processes. Based on discussions in a recently held workshop, and further work published since, we review the status of CISS effects - in electron transmission, electron transport, and chemical reactions. For each, we provide a detailed discussion of the state-of-the-art in theoretical understanding and identify remaining challenges and research opportunities.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Current-induced one-dimensional diffusion of Co ad-atoms on graphene nanoribbons
Authors:
Tobias Preis,
Sasha Vrbica,
Jonathan Eroms,
Jascha Repp,
Jan M. van Ruitenbeek
Abstract:
One-dimensional diffusion of Co ad-atoms on graphene nanoribbons has been induced and investigated by means of scanning tunnelling microscopy (STM). To this end, the nanoribbons and the Co ad-atoms have been imaged before and after injecting current pulses into the nanoribbons, with the STM tip in direct contact with the ribbon. We observe current-induced motion of the Co atoms along the nanoribbo…
▽ More
One-dimensional diffusion of Co ad-atoms on graphene nanoribbons has been induced and investigated by means of scanning tunnelling microscopy (STM). To this end, the nanoribbons and the Co ad-atoms have been imaged before and after injecting current pulses into the nanoribbons, with the STM tip in direct contact with the ribbon. We observe current-induced motion of the Co atoms along the nanoribbons, which is approximately described by a distribution expected for a thermally activated one-dimensional random walk. This indicates that the nanoribbons reach temperatures far beyond 100 K, which is well above the temperature of the underlying Au substrate. This model system can be developed further for the study of electromigration at the single-atom level.
△ Less
Submitted 15 June, 2021;
originally announced June 2021.
-
Raman Signal Reveals the Rhombohedral Crystallographic Structure in Ultra-thin Layers of Bismuth Thermally Evaporated on Amorphous Substrate
Authors:
Carlos Rodríguez-Fernández,
Kim Akius,
Mauricio Morais de Lima Jr.,
Andrés Cantarero,
Jan M. van Ruitenbeek,
Carlos Sabater
Abstract:
Under the challenge of growing a single bilayer of Bi oriented in the (111) crystallographic direction over amorphous substrates, we have studied different thicknesses of Bi thermally evaporated onto silicon oxide in order to shed light on the dominant atomic structures and their oxidation. We have employed atomic force microscope, X-ray diffraction, and scanning electron microscope approaches to…
▽ More
Under the challenge of growing a single bilayer of Bi oriented in the (111) crystallographic direction over amorphous substrates, we have studied different thicknesses of Bi thermally evaporated onto silicon oxide in order to shed light on the dominant atomic structures and their oxidation. We have employed atomic force microscope, X-ray diffraction, and scanning electron microscope approaches to demonstrate that Bi is crystalline and oriented in the (111) direction for thicknesses over 20 nm. Surprisingly, Raman spectroscopy indicates that the rhombohedral structure is preserved even for ultra-thin layers of Bi, down to $\sim 5$ nm. Moreover, the signals also reveal that bismuth films exposed to ambient conditions do not suffer major surface oxidation.
△ Less
Submitted 16 March, 2021;
originally announced March 2021.
-
Direct evidence for Cooper pairing without a spectral gap in a disordered superconductor above $T_{C}$
Authors:
Koen M. Bastiaans,
Damianos Chatzopoulos,
Jian-Feng Ge,
Doohee Cho,
Willem O. Tromp,
Jan M. van Ruitenbeek,
Mark H. Fischer,
Pieter J. de Visser,
David J. Thoen,
Eduard F. C. Driessen,
Teunis M. Klapwijk,
Milan P. Allan
Abstract:
The idea that preformed Cooper pairs could exist in a superconductor above its zero-resistance state has been explored for unconventional, interface, and disordered superconductors, yet direct experimental evidence is lacking. Here, we use scanning tunneling noise spectroscopy to unambiguously show that preformed Cooper pairs exist up to temperatures much higher than the zero-resistance critical t…
▽ More
The idea that preformed Cooper pairs could exist in a superconductor above its zero-resistance state has been explored for unconventional, interface, and disordered superconductors, yet direct experimental evidence is lacking. Here, we use scanning tunneling noise spectroscopy to unambiguously show that preformed Cooper pairs exist up to temperatures much higher than the zero-resistance critical temperature $T_{C}$ in the disordered superconductor titanium nitride, by observing a clear enhancement in the shot noise that is equivalent to a change of the effective charge from 1 to 2 electron charges. We further show that spectroscopic gap fills up rather than closes when increasing temperature. Our results thus demonstrate the existence of a novel state above $T_{C}$ that, much like an ordinary metal, has no (pseudo)gap, but carries charge via paired electrons.
△ Less
Submitted 21 January, 2021;
originally announced January 2021.
-
Advances and challenges in single-molecule electron transport
Authors:
Ferdinand Evers,
Richard Korytár,
Sumit Tewari,
Jan M. van Ruitenbeek
Abstract:
Electronic transport properties for single-molecule junctions have been widely measured by several techniques, including mechanically controllable break junctions, electromigration break junctions or by means of scanning tunneling microscopes. In parallel, many theoretical tools have been developed and refined for describing such transport properties and for obtaining numerical predictions. Most p…
▽ More
Electronic transport properties for single-molecule junctions have been widely measured by several techniques, including mechanically controllable break junctions, electromigration break junctions or by means of scanning tunneling microscopes. In parallel, many theoretical tools have been developed and refined for describing such transport properties and for obtaining numerical predictions. Most prominent among these theoretical tools are those based upon density functional theory. In this review, theory and experiment are critically compared and this confrontation leads to several important conclusions. The theoretically predicted trends nowadays reproduce the experimental findings quite well for series of molecules with a single well-defined control parameter, such as the length of the molecules. The quantitative agreement between theory and experiment usually is less convincing, however. Many reasons for quantitative discrepancies can be identified, from which one may decide that qualitative agreement is the best one may expect with present modeling tools. For further progress, benchmark systems are required that are sufficiently well-defined by experiment to allow quantitative testing of the approximation schemes underlying the theoretical modeling. Several key experiments can be identified suggesting that the present description may even be qualitatively incomplete in some cases. Such key experimental observations and their current models are also discussed here, leading to several suggestions for extensions of the models towards including dynamic image charges, electron correlations, and polaron formation.
△ Less
Submitted 28 June, 2020; v1 submitted 25 June, 2019;
originally announced June 2019.
-
On the formation of a conducting surface channel by ionic liquid gating of an insulator
Authors:
Hasan Atesci,
Francesco Coneri,
Maarten Leeuwenhoek,
Jouri Bommer,
James R. T. Seddon,
Hans Hilgenkamp,
Jan M. Van Ruitenbeek
Abstract:
Ionic liquid gating has become a popular tool for tuning the charge carrier densities of complex oxides. Among these the band insulator SrTiO$_3$ is one of the most extensively studied materials. While experiments have succeeded in inducing (super)conductivity, the process by which ionic liquid gating turns this insulator into a conductor is still under scrutiny. Recent experiments have suggested…
▽ More
Ionic liquid gating has become a popular tool for tuning the charge carrier densities of complex oxides. Among these the band insulator SrTiO$_3$ is one of the most extensively studied materials. While experiments have succeeded in inducing (super)conductivity, the process by which ionic liquid gating turns this insulator into a conductor is still under scrutiny. Recent experiments have suggested an electrochemical rather than electrostatic origin of the induced charge carriers. Here, we report experiments probing the time evolution of conduction of SrTiO$_3$ near the glass transition temperature of the ionic liquid. By cooling down to temperatures near the glass transition of the ionic liquid the process develops slowly and can be seen to evolve in time. The experiments reveal a process characterized by waiting times that can be as long as several minutes preceding a sudden appearance of conduction. For the conditions applied in our experiments we find a consistent interpretation in terms of an electrostatic mechanism for the formation of a conducting path at the surface of SrTiO$_3$. The mechanism by which the conducting surface channel develops relies on a nearly homogeneous lowering of the surface potential until the conduction band edge of SrTiO$_3$ reaches the Fermi level of the electrodes.
△ Less
Submitted 3 July, 2018; v1 submitted 4 September, 2017;
originally announced September 2017.
-
Fast and accurate shot noise measurements on atomic-size junctions in the MHz regime
Authors:
Sumit Tewari,
Carlos Sabater,
Manohar Kumar,
Stefan Stahl,
Bert Crama,
Jan M. van Ruitenbeek
Abstract:
Shot noise measurements on atomic and molecular junctions provide rich information about the quantum transport properties of the junctions and on the inelastic scattering events taking place in the process. Dissipation at the nanoscale, a problem of central interest in nano-electronics, can be studied in its most explicit and simplified form. Here, we describe a measurement technique that permits…
▽ More
Shot noise measurements on atomic and molecular junctions provide rich information about the quantum transport properties of the junctions and on the inelastic scattering events taking place in the process. Dissipation at the nanoscale, a problem of central interest in nano-electronics, can be studied in its most explicit and simplified form. Here, we describe a measurement technique that permits extending previous noise measurements to a much higher frequency range, and to much higher bias voltage range, while maintaining a high accuracy in noise and conductance. We also demonstrate the advantages of having access to the spectral information for diagnostics.
△ Less
Submitted 8 June, 2017;
originally announced June 2017.
-
Robust procedure for creating and characterizing the atomic structure of scanning tunneling microscope tips
Authors:
Sumit Tewari,
Koen M. Bastiaans,
Milan P. Allan,
Jan M. van Ruitenbeek
Abstract:
Scanning tunneling microscopes (STM) are used extensively for studying and manipulating matter at the atomic scale. In spite of the critical role of the STM tip, the control of the atomic-scale shape of STM tips remains a poorly solved problem. Here, we present a method for preparing tips {\it in-situ} and for ensuring the crystalline structure and reproducibly preparing tip structure up to the se…
▽ More
Scanning tunneling microscopes (STM) are used extensively for studying and manipulating matter at the atomic scale. In spite of the critical role of the STM tip, the control of the atomic-scale shape of STM tips remains a poorly solved problem. Here, we present a method for preparing tips {\it in-situ} and for ensuring the crystalline structure and reproducibly preparing tip structure up to the second atomic layer. We demonstrate a controlled evolution of such tips starting from undefined tip shapes.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
Size-effect of Kondo scattering in point contacts (revisited)
Authors:
I. K. Yanson,
V. V. Fisun,
N. L. Bobrov,
J. A. Mydosh,
J. M. van Ruitenbeek
Abstract:
The size-effect of Kondo-scattering in nanometer-sized metallic point contacts is measured with the simplified, mechanically-controlled break-junction technique for CuMn alloy of different Mn concentrations: 0.017; 0.035; and 0.18 ($\pm$0.017) at.\%. The results are compared with our previous publication on nominally 0.1 at.\% CuMn alloy \cite{1,2}. The increase of width of the Kondo resonance and…
▽ More
The size-effect of Kondo-scattering in nanometer-sized metallic point contacts is measured with the simplified, mechanically-controlled break-junction technique for CuMn alloy of different Mn concentrations: 0.017; 0.035; and 0.18 ($\pm$0.017) at.\%. The results are compared with our previous publication on nominally 0.1 at.\% CuMn alloy \cite{1,2}. The increase of width of the Kondo resonance and enhanced ratio of Kondo-peak intensity to electron-phonon scattering intensity is observed for contacts with sizes smaller than 10 $nm$. From the comparison of electron-phonon scattering intensity for the pressure-type contacts, which correspond to the clean orifice model, we conclude that the size effect is observed in \emph{clean} contacts with the shape of a \emph{channel} (nanowire).
△ Less
Submitted 13 February, 2017;
originally announced February 2017.
-
Observing "Quantized" Conductance Steps in Silver Sulfide: Two Parallel Resistive Switching Mechanisms
Authors:
J. J. T. Wagenaar,
M. Morales-Masis,
J. M. van Ruitenbeek
Abstract:
We demonstrate that it is possible to distinguish two conductance switching mechanisms in silver sulfide devices at room temperature. Experiments were performed using a Ag$_2$S thin film deposited on a wide Ag bottom electrode, which was contacted by the Pt tip of a scanning tunneling microscope. By applying a positive voltage on the silver electrode the conductance is seen to switch to a state ha…
▽ More
We demonstrate that it is possible to distinguish two conductance switching mechanisms in silver sulfide devices at room temperature. Experiments were performed using a Ag$_2$S thin film deposited on a wide Ag bottom electrode, which was contacted by the Pt tip of a scanning tunneling microscope. By applying a positive voltage on the silver electrode the conductance is seen to switch to a state having three orders of magnitude higher conductance, which is related to the formation of a conductive path inside the Ag$_2$S thin film. We argue this to be composed of a metallic silver nanowire accompanied by a modification of the surrounding lattice structure. Metallic silver nanowires decaying after applying a negative voltage allow observing conductance steps in the breaking traces characteristic for atomic-scale contacts, while the lattice structure deformation is revealed by gradual and continuously decreasing conductance traces.
△ Less
Submitted 17 March, 2016;
originally announced March 2016.
-
Quantum interference patterns around magnetic impurities in a 2D electron gas with strong Rashba spin-orbit interaction
Authors:
N. V. Khotkevych,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
Explicit dependencies of the local density of states and the magnetization local density of states have been obtained around magnetic point defects in a two-dimensional electron gas with Rashba spin-orbit interaction . The expressions are given in the Born approximation for arbitrary magnitude and orientation of the defect magnetic moment, and for arbitrary size of the constant of spin-orbit inter…
▽ More
Explicit dependencies of the local density of states and the magnetization local density of states have been obtained around magnetic point defects in a two-dimensional electron gas with Rashba spin-orbit interaction . The expressions are given in the Born approximation for arbitrary magnitude and orientation of the defect magnetic moment, and for arbitrary size of the constant of spin-orbit interaction alpha/. On the basis of our asymptotically exact formulas a procedure for the determination of the constant alpha/ in STM experiments is proposed. The novel analytical results are compared with the numerical and approximate results of previous work. At variance with earlier work we find that that magnetic scattering in the presence of spin-orbit interaction does not modify the local density of states and that the spin texture resulting from in-plain orientation of the defect magnetic moment, and elastic scattering, is not a purely in-plane spin texture.
△ Less
Submitted 13 January, 2016;
originally announced January 2016.
-
Molecule-assisted ferromagnetic atomic chain formation
Authors:
Manohar Kumar,
Kiran Kumar Vidya Sethu,
Jan M. van Ruitenbeek
Abstract:
One dimensional systems strongly enhance the quantum character of electron transport. Such systems can be realized in 5d transition metals Au, Pt and Ir, in the form of suspended monatomic chains between bulk leads. Atomic chains between ferromagnetic leads would open up many perspectives in the context of spin-dependent transport and spintronics, but the evidence suggests that for pure metals onl…
▽ More
One dimensional systems strongly enhance the quantum character of electron transport. Such systems can be realized in 5d transition metals Au, Pt and Ir, in the form of suspended monatomic chains between bulk leads. Atomic chains between ferromagnetic leads would open up many perspectives in the context of spin-dependent transport and spintronics, but the evidence suggests that for pure metals only the mentioned three 5d metals are susceptible to chain formation. It has been argued that the stability of atomic chains made up from ferromagnetic metals is compromised by the same exchange interaction that produces the local moments. Here we demonstrate that magnetic atomic chains can be induced to form in break junctions under the influence of light molecules. Explicitly, we find deuterium assisted chain formation in the 3d ferromagnetic transition metals Fe and Ni. Chain lengths up to eight atoms are formed upon stretching the ferromagnetic atomic contact in deuterium atmosphere at cryogenic temperatures. From differential conductance spectra vibronic states of D$_2$ can be identified, confirming the presence of deuterium in the atomic chains.
△ Less
Submitted 6 November, 2014;
originally announced November 2014.
-
Large tunable image-charge effects in single-molecule junctions
Authors:
M. L. Perrin,
C. J. O. Verzijl,
C. A. Martin,
A. J. Shaikh,
R. Eelkema,
J. H. van Esch,
J. M. van Ruitenbeek,
J. M. Thijssen,
H. S. J. van der Zant,
D. Dulić
Abstract:
The characteristics of molecular electronic devices are critically determined by metal-organic interfaces, which influence the arrangement of the orbital levels that participate in charge transport. Studies on self-assembled monolayers (SAMs) show (molecule-dependent) level shifts as well as transport-gap renormalization, suggesting that polarization effects in the metal substrate play a key role…
▽ More
The characteristics of molecular electronic devices are critically determined by metal-organic interfaces, which influence the arrangement of the orbital levels that participate in charge transport. Studies on self-assembled monolayers (SAMs) show (molecule-dependent) level shifts as well as transport-gap renormalization, suggesting that polarization effects in the metal substrate play a key role in the level alignment with respect to the metal's Fermi energy. Here, we provide direct evidence for an electrode-induced gap renormalization in single-molecule junctions. We study charge transport in single porphyrin-type molecules using electrically gateable break junctions. In this set-up, the position of the occupied and unoccupied levels can be followed in situ and with simultaneous mechanical control. When increasing the electrode separation, we observe a substantial increase in the transport gap with level shifts as high as several hundreds of meV for displacements of a few ångstroms. Analysis of this large and tunable gap renormalization with image-charge calculations based on atomic charges obtained from density functional theory confirms and clarifies the dominant role of image-charge effects in single-molecule junctions.
△ Less
Submitted 17 March, 2014;
originally announced March 2014.
-
Shot noise and magnetism of Pt atomic chains: accumulation of points at the boundary
Authors:
Manohar Kumar,
Oren Tal,
Roel H. M. Smit,
Alexander Smogunov,
Erio Tosatti,
Jan M. van Ruitenbeek
Abstract:
Pt is known to show spontaneous formation of monatomic chains upon breaking a metallic contact. From model calculations, these chains are expected to be spin polarized. However, direct experimental evidence for or against magnetism is lacking. Here, we investigate shot noise as a potential source of information on the magnetic state of Pt atomic chains. We observe a remarkable structure in the dis…
▽ More
Pt is known to show spontaneous formation of monatomic chains upon breaking a metallic contact. From model calculations, these chains are expected to be spin polarized. However, direct experimental evidence for or against magnetism is lacking. Here, we investigate shot noise as a potential source of information on the magnetic state of Pt atomic chains. We observe a remarkable structure in the distribution of measured shot-noise levels, where the data appear to be confined to the region of nonmagnetic states. While this suggests a nonmagnetic ground state for the Pt atomic chains, from calculations we find that the magnetism in Pt chains is due to 'actor' electron channels, which contribute very little to ballistic conductance and noise. On the other hand, there are weakly polarized 'spectator' channels, which carry most of the current and are only slightly modified by the magnetic state.
△ Less
Submitted 16 January, 2014;
originally announced January 2014.
-
Fermi surface contours obtained from STM images around surface point defects
Authors:
N. V. Khotkevych-Sanina,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
We present a theoretical analysis of the standing wave patterns in STM images, which occur around surface point defects. We consider arbitrary dispersion relations for the surface states and calculate the conductance for a system containing a small-size tunnel contact and a surface impurity. We find rigorous theoretical relations between the interference patterns in the real-space STM images, thei…
▽ More
We present a theoretical analysis of the standing wave patterns in STM images, which occur around surface point defects. We consider arbitrary dispersion relations for the surface states and calculate the conductance for a system containing a small-size tunnel contact and a surface impurity. We find rigorous theoretical relations between the interference patterns in the real-space STM images, their Fourier transforms and the Fermi contours of two-dimensional electrons. We propose a new method for reconstructing Fermi contours of surface electron states, directly from the real-space STM images around isolated surface defects.
△ Less
Submitted 29 November, 2013;
originally announced November 2013.
-
Sputter gas pressure effects on the properties of Sm-Co thin films deposited from a single target
Authors:
T. G. A. Verhagen,
D. B. Boltje,
J. M. van Ruitenbeek,
J. Aarts
Abstract:
We grow epitaxial Sm-Co thin films by sputter deposition from an alloy target with a nominal SmCo5 composition on Cr(100)-buffered MgO(100) single-crystal substrates. By varying the Ar gas pressure, we can change the composition of the film from a SmCo5-like to a Sm2Co7-like phase. The composition, crystal structure, morphology and magnetic properties of these films have been determined using Ruth…
▽ More
We grow epitaxial Sm-Co thin films by sputter deposition from an alloy target with a nominal SmCo5 composition on Cr(100)-buffered MgO(100) single-crystal substrates. By varying the Ar gas pressure, we can change the composition of the film from a SmCo5-like to a Sm2Co7-like phase. The composition, crystal structure, morphology and magnetic properties of these films have been determined using Rutherford Backscattering, X-ray diffraction and magnetization measurements. We find that the various properties are sensitive to the sputter background pressure in different ways. In particular, the lattice parameter changes in a continuous way, the coercive fields vary continuously with a maximum value of 3.3 T, but the saturation magnetization peaks when the lattice parameter is close to that of Sm2Co7. Moreover, we find that the Sm content of the films is higher than expected from the expected stoichiometry.
△ Less
Submitted 8 October, 2012;
originally announced October 2012.
-
Conductance of a STM contact on the surface of a thin film
Authors:
N. V. Khotkevych,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
The conductance of a contact, having a radius smaller than the Fermi wave length, on the surface of a thin metal film is investigated theoretically. It is shown that quantization of the electron energy spectrum in the film leads to a step-like dependence of differential conductance G(V) as a function of applied bias eV. The distance between neighboring steps in eV equals the energy level spacing d…
▽ More
The conductance of a contact, having a radius smaller than the Fermi wave length, on the surface of a thin metal film is investigated theoretically. It is shown that quantization of the electron energy spectrum in the film leads to a step-like dependence of differential conductance G(V) as a function of applied bias eV. The distance between neighboring steps in eV equals the energy level spacing due to size quantization. We demonstrate that a study of G(V) for both signs of the voltage maps the spectrum of energy levels above and below Fermi surface in scanning tunneling experiments.
△ Less
Submitted 15 January, 2012;
originally announced January 2012.
-
Influence of chemical structure on the stability and the conductance of porphyrin single-molecule junctions
Authors:
Mickael L. Perrin,
Ferry Prins,
Christian A. Martin,
Ahson J. Shaikh,
Rienk Eelkema,
Jan H. van Esch,
Tomas Briza,
Robert Kaplanek,
Vladimir Kral,
Jan M. van Ruitenbeek,
Herre S. J. van der Zant,
Diana Dulić
Abstract:
Porphyrin molecules can form stable single molecule junctions without anchoring groups. Adding thiol end groups and pyridine axial groups yields more stable junctions with an increased spread in low-bias conductance. This is a result of different bridging geometries during breaking, the stability of which is demonstrated in time-dependent conductance measurements. This is in strong contrast with r…
▽ More
Porphyrin molecules can form stable single molecule junctions without anchoring groups. Adding thiol end groups and pyridine axial groups yields more stable junctions with an increased spread in low-bias conductance. This is a result of different bridging geometries during breaking, the stability of which is demonstrated in time-dependent conductance measurements. This is in strong contrast with rod like molecules which show one preferential binding geometry.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
Charge Transport in a Zn-Porphyrin single molecule junction
Authors:
Mickael L. Perrin,
Christian A. Martin,
Ferry Prins,
Ahson J. Shaikh,
Rienk Eelkema,
Jan H. van Esch,
Jan M. van Ruitenbeek,
Herre S. J. van der Zant,
Diana Dulić
Abstract:
We have investigated charge transport in ZnTPPdT-Pyr molecular junctions using the lithographic MCBJ technique at room temperature and cryogenic temperature (6K). We combined low-bias statistical measurements with spectroscopy of the molecular levels using I(V) characteristics. This combination allows us to characterize the transport in a molecular junction in detail. This complex molecule can for…
▽ More
We have investigated charge transport in ZnTPPdT-Pyr molecular junctions using the lithographic MCBJ technique at room temperature and cryogenic temperature (6K). We combined low-bias statistical measurements with spectroscopy of the molecular levels using I(V) characteristics. This combination allows us to characterize the transport in a molecular junction in detail. This complex molecule can form different junction configurations, which is observed in trace histograms and in current-voltage (I(V)) measurements. Both methods show that multiple stable single-molecule junction configurations can be obtained by modulating the inter-electrode distance. In addition we demonstrate that different ZnTPPdT-Pyr junction configurations can lead to completely different spectroscopic features with the same conductance values. We show that statistical low-bias conductance measurements should be interpreted with care, and that the combination with I(V) spectroscopy represents an essential tool for a more detailed characterization of the charge transport in a single molecule.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
Bulk and Surface Nucleation Processes in Ag2S Conductance Switches
Authors:
M. Morales-Masis,
S. J. van der Molen,
T. Hasegawa,
J. M. van Ruitenbeek
Abstract:
We studied metallic Ag formation inside and on the surface of Ag2S thin films, induced by the electric field created with a STM tip. Two clear regimes were observed: cluster formation on the surface at low bias voltages, and full conductance switching at higher bias voltages (V > 70mV). The bias voltage at which this transition is observed is in agreement with the known threshold voltage for condu…
▽ More
We studied metallic Ag formation inside and on the surface of Ag2S thin films, induced by the electric field created with a STM tip. Two clear regimes were observed: cluster formation on the surface at low bias voltages, and full conductance switching at higher bias voltages (V > 70mV). The bias voltage at which this transition is observed is in agreement with the known threshold voltage for conductance switching at room temperature. We propose a model for the cluster formation at low bias voltage. Scaling of the measured data with the proposed model indicates that the process takes place near steady state, but depends on the STM tip geometry. The growth of the clusters is confirmed by tip retraction measurements and topography scans. This study provides improved understanding of the physical mechanisms that drive conductance switching in solid electrolyte memristive devices.
△ Less
Submitted 26 August, 2011;
originally announced August 2011.
-
Surprising lack of magnetism in the conductance channels of Pt atomic chains
Authors:
Manohar Kumar,
Oren Tal,
Roel H. M. Smit,
Jan M. van Ruitenbeek
Abstract:
Pt is known to show spontaneous formation of chains of metal atoms upon breaking a metallic contact. From model calculations these have been predicted to be spin polarized, which is reasonable in view of the Stoner enhanced susceptibility of bulk Pt and the increased density of states due to the reduced dimensionality. Here, we demonstrate that shot noise reveals information on the magnetic state…
▽ More
Pt is known to show spontaneous formation of chains of metal atoms upon breaking a metallic contact. From model calculations these have been predicted to be spin polarized, which is reasonable in view of the Stoner enhanced susceptibility of bulk Pt and the increased density of states due to the reduced dimensionality. Here, we demonstrate that shot noise reveals information on the magnetic state of Pt atomic chains. Against all predictions, we find clear evidence for a non-magnetic ground state for the conductance channels of Pt atomic chains.
△ Less
Submitted 20 January, 2011;
originally announced January 2011.
-
Transition Voltage Spectroscopy and the Nature of Vacuum Tunneling
Authors:
M. L. Trouwborst,
C. A. Martin,
R. H. M. Smit,
C. M. Guedon,
T. A. Baart,
S. J. van der Molen,
J. M. van Ruitenbeek
Abstract:
Transition Voltage Spectroscopy (TVS) has been proposed as a tool to analyze charge transport through molecular junctions. We extend TVS to Au-vacuum-Au junctions and study the distance dependence of the transition voltage V_t(d) for clean electrodes in cryogenic vacuum. On the one hand, this allows us to provide an important reference for V_t(d)-measurements on molecular junctions. On the other h…
▽ More
Transition Voltage Spectroscopy (TVS) has been proposed as a tool to analyze charge transport through molecular junctions. We extend TVS to Au-vacuum-Au junctions and study the distance dependence of the transition voltage V_t(d) for clean electrodes in cryogenic vacuum. On the one hand, this allows us to provide an important reference for V_t(d)-measurements on molecular junctions. On the other hand, we show that TVS forms a simple and powerful test for vacuum tunneling models.
△ Less
Submitted 10 January, 2011;
originally announced January 2011.
-
Quantum interference effects in a system of two tunnel point-contacts in the presence of single scatterer: simulation of a double-tip STM experiment
Authors:
N. V. Khotkevych,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
The conductance of systems containing two tunnel point-contacts and a single subsurface scatterer is investigated theoretically. The problem is solved in the approximation of s-wave scattering giving analytical expressions for the wave functions and for the conductance of the system. Conductance oscillations resulting from the interference of electron waves passing through different contacts and t…
▽ More
The conductance of systems containing two tunnel point-contacts and a single subsurface scatterer is investigated theoretically. The problem is solved in the approximation of s-wave scattering giving analytical expressions for the wave functions and for the conductance of the system. Conductance oscillations resulting from the interference of electron waves passing through different contacts and their interference with the waves scattered by the defect are analyzed. The prospect for determining the depth of the impurity below the metal surface by using the dependence of the conductance as a function of the distance between the contacts is discussed. It is shown that the application of an external magnetic field results in Aharonov-Bohm type oscillations in the conductance, the period of which allows detection of the depth of the defect in a double tip STM experiment.
△ Less
Submitted 30 November, 2010; v1 submitted 29 November, 2010;
originally announced November 2010.
-
Theory of oscillations in the STM conductance resulting from subsurface defects (Review Article)
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
In this review we present recent theoretical results concerning investigations of single subsurface defects by means of a scanning tunneling microscope (STM). These investigations are based on the effect of quantum interference between the electron partial waves that are directly transmitted through the contact and the partial waves scattered by the defect. In particular, we have shown the possibi…
▽ More
In this review we present recent theoretical results concerning investigations of single subsurface defects by means of a scanning tunneling microscope (STM). These investigations are based on the effect of quantum interference between the electron partial waves that are directly transmitted through the contact and the partial waves scattered by the defect. In particular, we have shown the possibility imaging the defect position below a metal surface by means of STM. Different types of subsurface defects have been discussed: point-like magnetic and non-magnetic defects, magnetic clusters in a nonmagnetic host metal, and non-magnetic defects in a s-wave superconductor. The effect of Fermi surface anisotropy has been analyzed. Also, results of investigations of the effect of a strong magnetic field to the STM conductance of a tunnel point contact in the presence of a single defect has been presented.
△ Less
Submitted 20 April, 2010;
originally announced April 2010.
-
Towards a Quantitative Description of Solid Electrolyte Conductance Switches
Authors:
Monica Morales-Masis,
Hans-Dieter Wiemhofer,
Jan M. van Ruitenbeek
Abstract:
We present a quantitative analysis of the steady state electronic transport in a resistive switching device. The device is composed of a thin film of Ag$_{2}$S (solid electrolyte) contacted by a Pt nano-contact acting as ion-blocking electrode, and a large area Ag reference electrode. When applying a bias voltage both ionic and electronic transport occurs, and depending on the polarity it causes a…
▽ More
We present a quantitative analysis of the steady state electronic transport in a resistive switching device. The device is composed of a thin film of Ag$_{2}$S (solid electrolyte) contacted by a Pt nano-contact acting as ion-blocking electrode, and a large area Ag reference electrode. When applying a bias voltage both ionic and electronic transport occurs, and depending on the polarity it causes an accumulation of ions around the nano-contact. At small applied voltages (pre-switching) we observed this as a strongly nonlinear current-voltage curve, which have been modeled using the Hebb-Wagner treatment for polarization of a mixed conductor. This model correctly describes the transport of the electrons within the polarized solid electrolyte in the steady state up until the resistance switching, covering the entire range of non-stoichiometries, and including the supersaturation range just before the deposition of elemental silver. In this way, it is a step towards a quantitative understanding of the processes that lead to resistance switching.
△ Less
Submitted 18 April, 2010;
originally announced April 2010.
-
Magneto-orientation and quantum size effect in SP-STM conductance in the presence of a subsurface magnetic cluster
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
The influence of a single magnetic cluster in a non-magnetic host metal on the spin current $\mathbf{j}^{(s)}$ and the charge current $\mathbf{j}$ in the vicinity of a ferromagnetic STM tip is studied theoretically. Spin-flip processes due to electron interaction with the cluster are taken into account. We show that quantum interference between the partial waves injected from the STM tip and tho…
▽ More
The influence of a single magnetic cluster in a non-magnetic host metal on the spin current $\mathbf{j}^{(s)}$ and the charge current $\mathbf{j}$ in the vicinity of a ferromagnetic STM tip is studied theoretically. Spin-flip processes due to electron interaction with the cluster are taken into account. We show that quantum interference between the partial waves injected from the STM tip and those scattered by the cluster results in the appearance of components perpendicular to the initial polarization of the spin current $\mathbf{j}^{(s)}$, which obtain a strongly inhomogeneous spatial distribution. This interference produces oscillations of the conductance as a function of the distance between the contact and the cluster center. The oscillation amplitude depends on the current polarization. We predict a strong magneto-orientational effect: the conductance oscillations may grow, shrink, or even vanish for rotation of the cluster magnetic moment $\mathbfμ_{\mathrm{eff}}$ by an external magnetic field. These results can be used for the determination of the $ \mathbfμ_{\mathrm{eff}}$ for magnetic clusters below a metal surface.
△ Less
Submitted 26 August, 2009;
originally announced August 2009.
-
Metallic properties of magnesium point contacts
Authors:
R. H. M. Smit,
A. I. Mares,
M. Haefner,
P. Pou,
J. C. Cuevas,
J. M. van Ruitenbeek
Abstract:
We present an experimental and theoretical study of the conductance and stability of Mg atomic-sized contacts. Using Mechanically Controllable Break Junctions (MCBJ), we have observed that the room temperature conductance histograms exhibit a series of peaks, which suggests the existence of a shell effect. Its periodicity, however, cannot be simply explained in terms of either an atomic or elect…
▽ More
We present an experimental and theoretical study of the conductance and stability of Mg atomic-sized contacts. Using Mechanically Controllable Break Junctions (MCBJ), we have observed that the room temperature conductance histograms exhibit a series of peaks, which suggests the existence of a shell effect. Its periodicity, however, cannot be simply explained in terms of either an atomic or electronic shell effect. We have also found that at room temperature, contacts of the diameter of a single atom are absent. A possible interpretation could be the occurrence of a metal-to-insulator transition as the contact radius is reduced, in analogy with what it is known in the context of Mg clusters. However, our first principle calculations show that while an infinite linear chain can be insulating, Mg wires with larger atomic coordinations, as in realistic atomic contacts, are alwaysmetallic. Finally, at liquid helium temperature our measurements show that the conductance histogram is dominated by a pronounced peak at the quantum of conductance. This is in good agreement with our calculations based on a tight-binding model that indicate that the conductance of a Mg one-atom contact is dominated by a single fully open conduction channel.
△ Less
Submitted 2 July, 2009;
originally announced July 2009.
-
The molecular signature of highly conductive metal-molecule-metal junctions
Authors:
O. Tal,
M. Kiguchi,
W. H. A. Thijssen,
D. Djukic,
C. Untiedt,
R. H. M. Smit,
J. M. van Ruitenbeek
Abstract:
The simplicity of single-molecule junctions based on direct bonding of a small molecule between two metallic electrodes make them an ideal system for the study of fundamental questions related to molecular electronics. Here we study the conductance properties of six different molecules suspended between Pt electrodes. All the molecular junctions show a typical conductance of about 1G0 which is a…
▽ More
The simplicity of single-molecule junctions based on direct bonding of a small molecule between two metallic electrodes make them an ideal system for the study of fundamental questions related to molecular electronics. Here we study the conductance properties of six different molecules suspended between Pt electrodes. All the molecular junctions show a typical conductance of about 1G0 which is ascribed to the dominant role of the Pt contacts. However, despite the metallic-like conductivity, the individual molecular signature is well-expressed by the effect of molecular vibrations in the inelastic contribution to the conductance.
△ Less
Submitted 9 July, 2009; v1 submitted 10 October, 2008;
originally announced October 2008.
-
Influence of a single defect on the conductance of a tunnel point contact between a normal metal and a superconductor
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
We have investigated theoretically the conductance of a Normal-Superconductor point-contact in the tunnel limit and analyzed the quantum interference effects originating from the scattering of quasiparticles by point-like defects. Analytical expressions for the oscillatory dependence of the conductance on the position of the defect are obtained for the defect situated either in the normal metal,…
▽ More
We have investigated theoretically the conductance of a Normal-Superconductor point-contact in the tunnel limit and analyzed the quantum interference effects originating from the scattering of quasiparticles by point-like defects. Analytical expressions for the oscillatory dependence of the conductance on the position of the defect are obtained for the defect situated either in the normal metal, or in the superconductor. It is found that the amplitude of oscillations significantly increases when the applied bias approaches the gap energy of the superconductor. The spatial distribution of the order parameter near the surface in the presence of a defect is also obtained.
△ Less
Submitted 2 July, 2008;
originally announced July 2008.
-
Highly conductive molecular junctions based on direct binding of benzene to platinum electrodes
Authors:
M. Kiguchi,
O. Tal,
S. Wohlthat,
F. Pauly,
M. Krieger,
D. Djukic,
J. C. Cuevas,
J. M. van Ruitenbeek
Abstract:
Highly conductive molecular junctions were formed by direct binding of benzene molecules between two Pt electrodes. Measurements of conductance, isotopic shift in inelastic spectroscopy and shot noise compared with calculations provide indications for a stable molecular junction where the benzene molecule is preserved intact and bonded to the Pt leads via carbon atoms. The junction has a conduct…
▽ More
Highly conductive molecular junctions were formed by direct binding of benzene molecules between two Pt electrodes. Measurements of conductance, isotopic shift in inelastic spectroscopy and shot noise compared with calculations provide indications for a stable molecular junction where the benzene molecule is preserved intact and bonded to the Pt leads via carbon atoms. The junction has a conductance comparable to that for metallic atomic junctions (around 0.1-1 Go), where the conductance and the number of transmission channels are controlled by the molecule's orientation at different inter-electrode distances.
△ Less
Submitted 4 March, 2008;
originally announced March 2008.
-
Lithographic mechanical break junctions for single-molecule measurements in vacuum: possibilities and limitations
Authors:
C. A. Martin,
D. Ding,
H. S. J. van der Zant,
J. M. van Ruitenbeek
Abstract:
We have investigated electrical transport through the molecular model systems benzenedithiol, benzenediamine, hexanedithiol and hexanediamine. Conductance histograms under different experimental conditions indicate that measurements using mechanically controllable break junctions in vacuum are limited by the surface density of molecules at the contact. Hexanedithiol histograms typically exhibit…
▽ More
We have investigated electrical transport through the molecular model systems benzenedithiol, benzenediamine, hexanedithiol and hexanediamine. Conductance histograms under different experimental conditions indicate that measurements using mechanically controllable break junctions in vacuum are limited by the surface density of molecules at the contact. Hexanedithiol histograms typically exhibit a broad peak around 7 * 10^{-4} G_0. In contrast to recent results on STM-based break junctions in solution we find that the spread in single-molecule conductance is not reduced by amino anchoring groups. Histograms of hexanediamine exhibit a very wide peak around 4 * 10^{-4} G_0. For both benzenedithiol and benzenediamine we observe a large variability in low-bias conductance. We attribute these features to the slow breaking of the lithographic mechanically controllable break junctions and the absence of a solvent that may enable molecular readsorption after bond breaking. Nevertheless, we have been able to acquire reproducible current-voltage characteristics of benzenediamine and benzenedithiol using a statistical measurement approach. Benzenedithiol measurements yield a conductance gap of about 0.9 V at room temperature and 0.6 V at 77 K. In contrast, the current-voltage characteristics of benzenediamine-junctions typically display conductance gaps of about 0.9 V at both temperatures.
△ Less
Submitted 1 July, 2008; v1 submitted 5 February, 2008;
originally announced February 2008.
-
The signature of subsurface Kondo impurities in the local tunnel current
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
J. M. van Ruitenbeek
Abstract:
The conductance of a tunnel point-contact in an STM-like geometry having a single defect placed below the surface is investigated theoretically. The effect of multiple electron scattering by the defect after reflections by the metal surface is taken into account. In the approximation of s-wave scattering the dependence of the conductance on the applied voltage and the position of the defect is o…
▽ More
The conductance of a tunnel point-contact in an STM-like geometry having a single defect placed below the surface is investigated theoretically. The effect of multiple electron scattering by the defect after reflections by the metal surface is taken into account. In the approximation of s-wave scattering the dependence of the conductance on the applied voltage and the position of the defect is obtained. The results are illustrated for a model s-wave phase shift describing Kondo-resonance scattering. We demonstrate that multiple electron scattering by the magnetic impurity plays a decisive role in the point-contact conductance at voltages near the Kondo resonance. We find that the sign and shape of the Kondo anomaly depends on the position of the defect.
△ Less
Submitted 31 January, 2008;
originally announced January 2008.
-
Electron-vibration interaction in single-molecule junctions: from contact to tunneling regime
Authors:
O. Tal,
M. Krieger,
B. Leerink,
J. M. van Ruitenbeek
Abstract:
Point contact spectroscopy on a H2O molecule bridging Pt electrodes reveals a clear crossover between enhancement and reduction of the conductance due to electron-vibration interaction. As single channel models predict such a crossover at transmission probability of t=0.5, we used shot noise measurements to analyze the transmission and observed at least two channels across the junction where the…
▽ More
Point contact spectroscopy on a H2O molecule bridging Pt electrodes reveals a clear crossover between enhancement and reduction of the conductance due to electron-vibration interaction. As single channel models predict such a crossover at transmission probability of t=0.5, we used shot noise measurements to analyze the transmission and observed at least two channels across the junction where the dominant channel has t=0.51+/-0.01 transmission probability at the crossover conductance, which is consistent with the predictions for single-channel models.
△ Less
Submitted 21 January, 2008;
originally announced January 2008.
-
Conductance of a tunnel point-contact of noble metals in the presence of a single defect
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
S. B. Roobol,
J. M. van Ruitenbeek
Abstract:
In paper [1] (Avotina et al. Phys. Rev. B,74, 085411 (2006)) the effect of Fermi surface anisotropy to the conductance of a tunnel point contact, in the vicinity of which a single point-like defect is situated, has been investigated theoretically. The oscillatory dependence of the conductance on the distance between the contact and the defect has been found for a general Fermi surface geometry.…
▽ More
In paper [1] (Avotina et al. Phys. Rev. B,74, 085411 (2006)) the effect of Fermi surface anisotropy to the conductance of a tunnel point contact, in the vicinity of which a single point-like defect is situated, has been investigated theoretically. The oscillatory dependence of the conductance on the distance between the contact and the defect has been found for a general Fermi surface geometry. In this paper we apply the method developed in [1] to the calculation of the conductance of noble metal contacts. An original algorithm, which enables the computation of the conductance for any parametrically given Fermi surface, is proposed. On this basis a pattern of the conductance oscillations, which can be observed by the method of scanning tunneling microscopy, is obtained for different orientations of the surface for the noble metals.
△ Less
Submitted 23 October, 2007;
originally announced October 2007.
-
Formation and properties of metal-oxygen atomic chains
Authors:
W. H. A. Thijssen,
M. Strange,
J. M. J. aan de Brugh,
J. M. van Ruitenbeek
Abstract:
Suspended chains consisting of single noble metal and oxygen atoms have been formed. We provide evidence that oxygen can react with and be incorporated into metallic one-dimensional atomic chains. Oxygen incorporation reinforces the linear bonds in the chain, which facilitates the creation of longer atomic chains. The mechanical and electrical properties of these diatomic chains have been invest…
▽ More
Suspended chains consisting of single noble metal and oxygen atoms have been formed. We provide evidence that oxygen can react with and be incorporated into metallic one-dimensional atomic chains. Oxygen incorporation reinforces the linear bonds in the chain, which facilitates the creation of longer atomic chains. The mechanical and electrical properties of these diatomic chains have been investigated by determining local vibration modes of the chain and by measuring the dependence of the average chain-conductance on the length of the chain. Additionally, we have performed calculations that give insight in the physical mechanism of the oxygen-induced strengthening of the linear bonds and the conductance of the metal-oxygen chains.
△ Less
Submitted 17 September, 2007;
originally announced September 2007.
-
Mechanical properties of Pt monatomic chains
Authors:
T. Shiota,
A. I. Mares,
A. M. C. Valkering,
T. H. Oosterkamp,
J. M. van Ruitenbeek
Abstract:
The mechanical properties of platinum monatomic chains were investigated by simultaneous measurement of an effective stiffness and the conductance using our newly developed mechanically controllable break junction (MCBJ) technique with a tuning fork as a force sensor. When stretching a monatomic contact (two-atom chain), the stiffness and conductance increases at the early stage of stretching an…
▽ More
The mechanical properties of platinum monatomic chains were investigated by simultaneous measurement of an effective stiffness and the conductance using our newly developed mechanically controllable break junction (MCBJ) technique with a tuning fork as a force sensor. When stretching a monatomic contact (two-atom chain), the stiffness and conductance increases at the early stage of stretching and then decreases just before breaking, which is attributed to a transition of the chain configuration and bond weakening. A statistical analysis was made to investigate the mechanical properties of monatomic chains. The average stiffness shows minima at the peak positions of the length-histogram. From this result we conclude that the peaks in the length-histogram are a measure of the number of atoms in the chains, and that the chains break from a strained state. Additionally, we find that the smaller the initial stiffness of the chain is, the longer the chain becomes. This shows that softer chains can be stretched longer.
△ Less
Submitted 22 January, 2008; v1 submitted 31 July, 2007;
originally announced July 2007.
-
Aluminium Nanowires: Influence of Work Hardening on Conductance Histograms
Authors:
I. K. Yanson,
O. I. Shklyarevskii,
J. M. van Ruitenbeek,
S. Speller
Abstract:
Conductance histograms of work-hardened Al show a series up to 11 equidistant peaks with a period of 1.15 +/- 0.02 of the quantum conductance unit G_0 = 2e^2/h. Assuming the peaks originate from atomic discreteness, this agrees with the value of 1.16 G_0 per atom obtained in numerical calculations by Hasmy et al.
Conductance histograms of work-hardened Al show a series up to 11 equidistant peaks with a period of 1.15 +/- 0.02 of the quantum conductance unit G_0 = 2e^2/h. Assuming the peaks originate from atomic discreteness, this agrees with the value of 1.16 G_0 per atom obtained in numerical calculations by Hasmy et al.
△ Less
Submitted 9 July, 2007;
originally announced July 2007.
-
Electronic and atomic shell structure in aluminum nanowires
Authors:
A. I. Mares,
D. F. Urban,
J. Bürki,
H. Grabert,
C. A. Stafford,
J. M. van Ruitenbeek
Abstract:
We report experiments on aluminum nanowires in ultra-high vacuum at room temperature that reveal a periodic spectrum of exceptionally stable structures. Two "magic" series of stable structures are observed: At low conductance, the formation of stable nanowires is governed by electronic shell effects whereas for larger contacts atomic packing dominates. The crossover between the two regimes is fo…
▽ More
We report experiments on aluminum nanowires in ultra-high vacuum at room temperature that reveal a periodic spectrum of exceptionally stable structures. Two "magic" series of stable structures are observed: At low conductance, the formation of stable nanowires is governed by electronic shell effects whereas for larger contacts atomic packing dominates. The crossover between the two regimes is found to be smooth. A detailed comparison of the experimental results to a theoretical stability analysis indicates that while the main features of the observed electron-shell structure are similar to those of alkali and noble metals, a sequence of extremely stable wires plays a unique role in Aluminum. This series appears isolated in conductance histograms and can be attributed to "superdeformed" non-axisymmetric nanowires.
△ Less
Submitted 23 March, 2007; v1 submitted 22 March, 2007;
originally announced March 2007.
-
Evidence for a single hydrogen molecule connected by an atomic chain
Authors:
M. Kiguchi,
R. Stadler,
I. S. Kristensen,
D. Djukic,
J. M. van Ruitenbeek
Abstract:
Stable, single-molecule conducting-bridge configurations are typically identified from peak structures in a conductance histogram. In previous work on Pt with H$_2$ at cryogenic temperatures it has been shown that a peak near 1 $G{_0}$ identifies a single molecule Pt-H$_{2}$-Pt bridge. The histogram shows an additional structure with lower conductance that has not been identified. Here, we show…
▽ More
Stable, single-molecule conducting-bridge configurations are typically identified from peak structures in a conductance histogram. In previous work on Pt with H$_2$ at cryogenic temperatures it has been shown that a peak near 1 $G{_0}$ identifies a single molecule Pt-H$_{2}$-Pt bridge. The histogram shows an additional structure with lower conductance that has not been identified. Here, we show that it is likely due to a hydrogen decorated Pt chain in contact with the H$_2$ molecular bridge.
△ Less
Submitted 28 December, 2006;
originally announced December 2006.
-
Formation of a Metallic Contact: Jump to Contact Revisited
Authors:
C. Untiedt,
M. J. Caturla,
M. R. Calvo,
J. J. Palacios,
R. C. Segers,
J. M. van Ruitenbeek
Abstract:
The transition from tunneling to metallic contact between two surfaces does not always involve a jump, but can be smooth. We have observed that the configuration and material composition of the electrodes before contact largely determines the presence or absence of a jump. Moreover, when jumps are found preferential values of conductance have been identified. Through combination of experiments,…
▽ More
The transition from tunneling to metallic contact between two surfaces does not always involve a jump, but can be smooth. We have observed that the configuration and material composition of the electrodes before contact largely determines the presence or absence of a jump. Moreover, when jumps are found preferential values of conductance have been identified. Through combination of experiments, molecular dynamics, and first-principles transport calculations these conductance values are identified with atomic contacts of either monomers, dimers or double-bond contacts.
△ Less
Submitted 5 November, 2006;
originally announced November 2006.
-
Magneto-quantum oscillations of the conductance of a tunnel point-contact in the presence of a single defect
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
A. F. Otte,
J. M. van Ruitenbeek
Abstract:
The influence of a quantizing magnetic field $H$ to the conductance of a tunnel point contact in the presence of the single defect has been considered. We demonstrate that the conductance exhibits specific magneto-quantum oscillations, the amplitude and period of which depend on the distance between the contact and the defect. We show that a non-monotonic dependence of the point-contact conducta…
▽ More
The influence of a quantizing magnetic field $H$ to the conductance of a tunnel point contact in the presence of the single defect has been considered. We demonstrate that the conductance exhibits specific magneto-quantum oscillations, the amplitude and period of which depend on the distance between the contact and the defect. We show that a non-monotonic dependence of the point-contact conductance results from a superposition of two types of oscillations: A short period oscillation arising from electron focusing by the field $H$ and a long period oscillation of Aharonov-Bohm-type originated from the magnetic flux passing through the closed trajectories of electrons moving from the contact to the defect and returning back to the contact.
△ Less
Submitted 12 March, 2007; v1 submitted 17 October, 2006;
originally announced October 2006.
-
Effect of bonding of a CO molecule on the conductance of atomic metal wires
Authors:
M. Kiguchi,
D. Djukic,
J. M. van Ruitenbeek
Abstract:
We have measured the effect of bonding of a CO molecule on the conductance of Au, Cu, Pt, and Ni atomic contacts at 4.2 K. When CO gas is admitted to the metal nano contacts, a conductance feature appears in the conductance histogram near 0.5 of the quantum unit of conductance, for all metals. For Au, the intensity of this fractional conductance feature can be tuned with the bias voltage, and it…
▽ More
We have measured the effect of bonding of a CO molecule on the conductance of Au, Cu, Pt, and Ni atomic contacts at 4.2 K. When CO gas is admitted to the metal nano contacts, a conductance feature appears in the conductance histogram near 0.5 of the quantum unit of conductance, for all metals. For Au, the intensity of this fractional conductance feature can be tuned with the bias voltage, and it disappears at high bias voltage (above $\sim$ 200 mV). The bonding of CO to Au appears to be weakest, and associated with monotomic Au wire formation.
△ Less
Submitted 9 October, 2006;
originally announced October 2006.
-
Formation of Atomic-Sized Contacts by Electrochemical Methods
Authors:
M. R. Calvo,
A. I. Mares,
V. Climent,
J. M. van Ruitenbeek,
C. Untiedt
Abstract:
Electrochemical methods have recently become an interesting tool for fabricating and characterizing nanostructures at room temperature. Simplicity, low cost and reversibility are some of the advantages of this technique that allows to work at the nanoscale without requiring sophisticated instrumentation. In our experimental setup, we measure the conductance across a nanocontact fabricated either…
▽ More
Electrochemical methods have recently become an interesting tool for fabricating and characterizing nanostructures at room temperature. Simplicity, low cost and reversibility are some of the advantages of this technique that allows to work at the nanoscale without requiring sophisticated instrumentation. In our experimental setup, we measure the conductance across a nanocontact fabricated either by dissolving a macroscopic gold wire or by depositing gold in between two separated gold electrodes. We have achieved a high level of control on the electrochemical fabrication of atomic-sized contacts in gold. The use of electrochemistry as a reproducible technique to prepare nanocontacts will open several possibilities that are not feasible with other methodologies. It involves, also, the possibility of reproducing experiments that today are made by more expensive, complicated or irreversible methods. As example, we show here a comparison of the results when looking for shell effects in gold nanocontacts with those obtained by other techniques.
△ Less
Submitted 17 June, 2009; v1 submitted 6 October, 2006;
originally announced October 2006.
-
Vibrationally Induced Two-Level Systems in Single-Molecule Junctions
Authors:
W. H. A. Thijssen,
D. Djukic,
A. F. Otte,
R. H. Bremmer,
J. M. van Ruitenbeek
Abstract:
Single-molecule junctions are found to show anomalous spikes in dI/dV spectra. The position in energy of the spikes are related to local vibration mode energies. A model of vibrationally induced two-level systems reproduces the data very well. This mechanism is expected to be quite general for single-molecule junctions. It acts as an intrinsic amplification mechanism for local vibration mode fea…
▽ More
Single-molecule junctions are found to show anomalous spikes in dI/dV spectra. The position in energy of the spikes are related to local vibration mode energies. A model of vibrationally induced two-level systems reproduces the data very well. This mechanism is expected to be quite general for single-molecule junctions. It acts as an intrinsic amplification mechanism for local vibration mode features and may be exploited as a new spectroscopic tool.
△ Less
Submitted 18 July, 2006;
originally announced July 2006.
-
Signature of Fermi surface anisotropy in point contact conductance in the presence of defects
Authors:
Ye. S. Avotina,
Yu. A. Kolesnichenko,
A. F. Otte,
J. M. van Ruitenbeek
Abstract:
In a previous paper (Avotina et al.,Phys. Rev. B Vol.71, 115430 (2005)) we have shown that in principle it is possible to image the defect positions below a metal surface by means of a scanning tunnelling microscope. The principle relies on the interference of electron waves scattered on the defects, which give rise to small but measurable conductance fluctuations. Whereas in that work the band…
▽ More
In a previous paper (Avotina et al.,Phys. Rev. B Vol.71, 115430 (2005)) we have shown that in principle it is possible to image the defect positions below a metal surface by means of a scanning tunnelling microscope. The principle relies on the interference of electron waves scattered on the defects, which give rise to small but measurable conductance fluctuations. Whereas in that work the band structure was assumed to be free-electron like, here we investigate the effects of Fermi surface anisotropy. We demonstrate that the amplitude and period of the conductance oscillations are determined by the local geometry of the Fermi surface. The signal results from those points for which the electron velocity is directed along the vector connecting the point contact to the defect. For a general Fermi surface geometry the position of the maximum amplitude of the conductance oscillations is not found for the tip directly above the defect. We have determined optimal conditions for determination of defect positions in metals with closed and open Fermi surfaces.
△ Less
Submitted 13 April, 2006;
originally announced April 2006.
-
Oxygen enhanced atomic chain formation
Authors:
W. H. A. Thijssen,
D. Marjenburgh,
R. H. Bremmer,
J. M. van Ruitenbeek
Abstract:
We report experimental evidence for atomic chain formation during stretching of atomic-sized contacts for gold and silver, that is strongly enhanced due to oxygen incorporation. While gold has been known for its tendency to form atomic chains, for silver this is only observed in the presence of oxygen. With oxygen the silver chains are as long as those for gold, but the conductance drops with ch…
▽ More
We report experimental evidence for atomic chain formation during stretching of atomic-sized contacts for gold and silver, that is strongly enhanced due to oxygen incorporation. While gold has been known for its tendency to form atomic chains, for silver this is only observed in the presence of oxygen. With oxygen the silver chains are as long as those for gold, but the conductance drops with chain length to about 0.1 conductance quantum. A relation is suggested with previous work on surface reconstructions for silver (110) surfaces after chemisorption of oxygen.
△ Less
Submitted 14 September, 2005;
originally announced September 2005.