Showing 1–37 of 37 results for author: Ferrari, M

Multi-purpose InSTRument for Astronomy at Low-resolution: MISTRAL@OHP

Authors: J. Schmitt, C. Adami, M. Dennefeld, F. Agneray, S. Basa, J. C. Brunel, V. Buat, D. Burgarella, C. Carvalho, G. Castagnoli, N. Grosso, F. Huppert, C. Moreau, F. Moreau, L. Moreau, E. Muslimov, S. Pascal, S. Perruchot, D. Russeil, J. L. Beuzit, F. Dolon, M. Ferrari, B. Hamelin, A. LevanSuu, K. Aravind , et al. (9 additional authors not shown)

Abstract: MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environmen… ▽ More MISTRAL is the new Faint Object Spectroscopic Camera mounted at the folded Cassegrain focus of the 1.93m telescope of Haute-Provence Observatory. We describe the design and components of the instrument and give some details about its operation. We emphasise in particular the various observing modes and the performances of the detector. A short description is also given about the working environment. Various types of objects, including stars, nebulae, comets, novae, galaxies have been observed during various test phases to evaluate the performances of the instrument. The instrument covers the range of 4000 to 8000A with the blue setting, or from 6000 to 10000A with the red setting, at an average spectral resolution of 700. Its peak efficiency is about 22% at 6000A. In spectroscopy, a limiting magnitude of 19.5 can be achieved for a point source in one hour with a signal to noise of 3 in the continuum (and better if emission lines are present). In imaging mode, limiting magnitudes of 20-21 can be obtained in 10-20mn (with average seing conditions of 2.5 arcsec at OHP). The instrument is very users-friendly and can be put into operations in less than 15mn (rapid change-over from the other instrument in use) if required by the science (like for Gamma-Rays Bursts). Some first scientific results are described for various types of objects, and in particular for the follow-up of GRBs. While some further improvements are still under way, in particular to ease the switch from blue to red setting and add more grisms or filters, MISTRAL is ready for the follow-up of transients and other variable objects, in the soon-to-come era of e.g. the SVOM satellite and of the Rubin telescope. △ Less

Submitted 4 April, 2024; originally announced April 2024.

Comments: Accepted in A&A

The Mass-Temperature Relation for B and Early A Stars Based on IUE Spectra of Detached Eclipsing Binaries

Authors: Nancy Remage Evans, Mckenzie G. Ferrari, Joanna Kuraszkiewicz, Steven Silverberg, Joy Nichols, Guillermo Torres, Makenzi Fischbach

Abstract: Ultraviolet spectra were taken of 25 Detached Eclipsing Binaries (DEBs) with spectral types O, B, and early A with the International Ultraviolet Explorer (IUE) satellite in the 1150 to 1900 $Å$ region. The spectra were compared with BOSZ model atmospheres (Bohlin, et al. 2017). The composite spectra of the DEBs were modeled by a combination of models representing the hot and cool components, and t… ▽ More Ultraviolet spectra were taken of 25 Detached Eclipsing Binaries (DEBs) with spectral types O, B, and early A with the International Ultraviolet Explorer (IUE) satellite in the 1150 to 1900 $Å$ region. The spectra were compared with BOSZ model atmospheres (Bohlin, et al. 2017). The composite spectra of the DEBs were modeled by a combination of models representing the hot and cool components, and the temperatures of the hottest components of the systems were determined. From these temperatures a direct Mass-Temperature relation was obtained for stars close to the main sequence with solar metallicity for B and early A stars: log M/Msun = -5.90 $\pm$ 0.27 + (1.56 $\pm$ 0.07) x log T This relation allows a mass to be inferred for comparable stars from an ultraviolet spectrum. The five chemically peculiar Am stars in the sample have larger radii than normal A stars of the same mass. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Comments: accepted by AJ

Report number: 04

Ceres as seen by VIR/ Dawn: spectral modeling and laboratory measurements suggest altered and pristine silicates within carbon chemistry

Authors: Andrea Raponi, Marco Ferrari, Maria Cristina De Sanctis, Eleonora Ammannito, Mauro Ciarniello, Filippo Giacomo Carrozzo

Abstract: The NASA/Dawn mission has acquired an unprecedented amount of data from the surface of the dwarf planet Ceres, providing a thorough characterization of its surface composition. The current favorite compositional model includes a mixture of ultra-carbonaceous material, phyllosilicates, carbonates, organic, Fe-oxides, and volatiles, as determined by the Dawn/VIR-IR imaging spectrometer, with the con… ▽ More The NASA/Dawn mission has acquired an unprecedented amount of data from the surface of the dwarf planet Ceres, providing a thorough characterization of its surface composition. The current favorite compositional model includes a mixture of ultra-carbonaceous material, phyllosilicates, carbonates, organic, Fe-oxides, and volatiles, as determined by the Dawn/VIR-IR imaging spectrometer, with the constraints on the elemental composition provided by the Dawn/GRAND instrument. The recent calibration of the VIS channel of the VIR spectrometer provided further constraints on the overall compositional model, suggesting another type of silicate not previously considered. This work reviews the VIR-VIS calibration process, and the resulting compositional model of Ceres surface considering both VIS and IR channels. Laboratory experiments are needed for a better understanding of the global (VIS-IR) shape of Ceres average surface, and in particular for the interpretation of the emergent absorption at 1μm. Current and future experiments are also discussed in this work. △ Less

Submitted 22 February, 2023; originally announced February 2023.

Near-Chandrasekhar-Mass Type Ia Supernovae from the Double-Degenerate Channel

Authors: Sudarshan Neopane, Khanak Bhargava, Robert Fisher, Mckenzie Ferrari, Shin'ichirou Yoshida, Silvia Toonen, Eduardo Bravo

Abstract: Recent observational evidence has demonstrated that white dwarf (WD) mergers are a highly efficient mechanism for mass accretion onto WDs in the galaxy. In this paper, we show that WD mergers naturally produce highly-magnetized, uniformly-rotating WDs, including a substantial population within a narrow mass range close to the Chandrasekhar mass ($M_{\rm Ch}$). These near-$M_{\rm Ch}$ WD mergers su… ▽ More Recent observational evidence has demonstrated that white dwarf (WD) mergers are a highly efficient mechanism for mass accretion onto WDs in the galaxy. In this paper, we show that WD mergers naturally produce highly-magnetized, uniformly-rotating WDs, including a substantial population within a narrow mass range close to the Chandrasekhar mass ($M_{\rm Ch}$). These near-$M_{\rm Ch}$ WD mergers subsequently undergo rapid spin up and compression on a $\sim 10^2$ yr timescale, either leading to central ignition and a normal SN Ia via the DDT mechanism, or alternatively to a failed detonation and SN Iax through pure deflagration. The resulting SNe Ia and SNe Iax will have spectra, light curves, polarimetry, and nucleosynthetic yields similar to those predicted to arise through the canonical near-$M_{\rm Ch}$ single degenerate (SD) channel, but with a $t^{-1}$ delay time distribution characteristic of the double-degenerate (DD) channel. Furthermore, in contrast to the SD channel, WD merger near-$M_{\rm Ch}$ SNe Ia and SNe Iax will not produce observable companion signatures. We discuss a range of implications of these findings, from SNe Ia explosion mechanisms, to galactic nucleosynthesis of iron peak elements including manganese. △ Less

Submitted 18 November, 2021; originally announced November 2021.

Comments: 20 pages, 4 figures, nucleosynthetic yields included as ancillary data files. Accepted to The Astrophysical Journal. Comments welcome

Active deployable primary mirrors on CubeSat

Authors: Noah Schwartz, Maria Milanova, William Brzozowski, Stephen Todd, Zeshan Ali, Lucie Buron, Jean-François-Sauvage, Charlotte Bond, Heather Bruce, Phil Rees, Marc Ferrari, Donald MacLeod

Abstract: The volume available on small satellites restricts the size of optical apertures to a few centimetres, limiting the Ground-Sampling Distance (GSD) in the visible to typically 3 m at 500 km. We present in this paper the latest development of a laboratory demonstrator of a segmented deployable telescope that will triple the achievable ground resolution and improve photometric capability of CubeSat i… ▽ More The volume available on small satellites restricts the size of optical apertures to a few centimetres, limiting the Ground-Sampling Distance (GSD) in the visible to typically 3 m at 500 km. We present in this paper the latest development of a laboratory demonstrator of a segmented deployable telescope that will triple the achievable ground resolution and improve photometric capability of CubeSat imagers. Each mirror segment is folded for launch and unfolds in space. We demonstrate through laboratory validation very high deployment repeatability of the mirrors <{\pm}5 μm. To enable diffraction-limited imaging, segments are controlled in piston, tip, and tilt. This is achieved by an initial coarse alignment of the mirrors followed by a fine phasing step. Finally, we investigate the impact of the thermal environment on high-order wavefront error and the conceptual design of a deployable secondary fitting inside 1U. △ Less

Submitted 26 May, 2021; originally announced May 2021.

Comments: Proceedings of 13th IAA Symposium on Small Satellites for Earth Observation (SSSEO 2021)

Journal ref: Proceedings of 13th IAA Symposium on Small Satellites for Earth Observation (SSSEO 2021)

3D printing for astronomical mirrors

Authors: Melanie Roulet, Carolyn Atkins, Emmanuel Hugot, Sabri Lemared, Simona Lombardo, Marc Ferrari

Abstract: 3D printing, also called additive manufacturing, offers a new vision for optical fabrication in term of achievable optical quality and reduction of weight and cost. In this paper we describe two different ways to use this technique in the fabrication process. The first method makes use of 3D printing in the fabrication of warping harnesses for stress polishing, and we apply that to the fabrication… ▽ More 3D printing, also called additive manufacturing, offers a new vision for optical fabrication in term of achievable optical quality and reduction of weight and cost. In this paper we describe two different ways to use this technique in the fabrication process. The first method makes use of 3D printing in the fabrication of warping harnesses for stress polishing, and we apply that to the fabrication of the WFIRST coronagraph off axis parabolas. The second method considers a proof of concept for 3D printing of lightweight X-Ray mirrors, targeting the next generation of X-rays telescopes. Stress polishing is well suited for the fabrication of the high quality off axis parabolas required by the coronagraph to image exoplanets.. Here we describe a new design of warping harness which can generate astigmatism and coma with only one actuator. The idea is to incorporate 3D printing in the manufacturing of the warping harness. The method depicted in this paper demonstrates that we reach the tight precision required at the mirrors surface. Moreover the error introduced by the warping harness fabricated by 3D printing does not impact the final error budget. Concerning the proof of concept project, we investigate 3D printing towards lightweight X-ray mirrors. We present the surface metrology of test samples fabricated by stereo lithography (SLA) and Selective Laser Sintering (SLS) with different materials. The lightweighting of the samples is composed of a series of arches. By complementing 3D printing with finite element analysis topology optimization we can simulate a specific optimum shape for the given input parameters and external boundary conditions. The next set of prototypes is designed taking to account the calculation of topology optimisation. △ Less

Submitted 2 November, 2020; originally announced November 2020.

Journal ref: Proceedings Volume 10675, 3D Printed Optics and Additive Photonic Manufacturing; 1067504 (2018)

Superpolished OAPs for WFIRST CGI

Authors: Melanie Roulet, Emmanuel Hugot, Carolyn Atkins, Sabri Lemared, Simona Lombardo, Marc Ferrari

Abstract: Exoplanet imaging requires super polished off-axis parabolas (OAP) with the utmost surface quality. In this paper we describe an innovative manufacturing process combining 3D printing and stress polishing, to create a warping harness capable of producing any off axis parabola profile with a single actuator. The warping harness is manufactured by 3D printing. This method will be applied to the prod… ▽ More Exoplanet imaging requires super polished off-axis parabolas (OAP) with the utmost surface quality. In this paper we describe an innovative manufacturing process combining 3D printing and stress polishing, to create a warping harness capable of producing any off axis parabola profile with a single actuator. The warping harness is manufactured by 3D printing. This method will be applied to the production of the WFIRST coronagraph's off axis parabolas. The evolution of the warping harness design is presented, starting from a ring warping harness generating astigmatism, to an innovative thickness distribution harness optimised to generate an off axis parabola shape. Several design options are available for the prototyping phase, with their advantages and disadvantages which will be discussed. △ Less

Submitted 2 November, 2020; originally announced November 2020.

Journal ref: Proceedings Volume 10698, Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave; 106982Q (2018)

The surface of (1) Ceres in visible light as seen by Dawn/VIR

Authors: B. Rousseau, M. C. De Sanctis, A. Raponi, M. Ciarniello, E. Ammannito, A. Frigeri, M. Ferrari, S. De Angelis, F. Tosi, S. E. Schröder, C. A. Raymond, C. T. Russell

Abstract: We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrate… ▽ More We study the surface of Ceres at visible wavelengths, as observed by the Visible and InfraRed mapping spectrometer (VIR) onboard the Dawn spacecraft, and analyze the variations of various spectral parameters across the whole surface. We also focus on several noteworthy areas of the surface of this dwarf planet. We made use of the newly corrected VIR visible data to build global maps of a calibrated radiance factor at 550 nm, with two color composites and three spectral slopes between 400 and 950 nm. We have made these maps available for the community via the Aladin Desktop software. Ceres surface shows diverse spectral behaviors in the visible range. The color composite and the spectral slope between 480 and 800 nm highlight fresh impact craters and young geologic formations of endogenous origin, which appear bluer than the rest of the surface. The steep slope before 465 nm displays very distinct variations and may be a proxy for the absorptions caused by the $O_2^{-}$ -> $Fe^{3+}$ or the $2Fe^{3+}$ -> $Fe^{2+} + Fe^{4+}$ charge transfer, if the latter are found to be responsible for the drop in this spectral range. We notice several similarities between the spectral slopes and the abundance of phyllosilicates detected in the infrared by the VIR, whereas no correlation can be clearly established with carbonate species. The region of the Dantu impact crater presents a peculiar spectral behavior (especially through the color and the spectral slope before 465 nm) suggesting a change in composition or in the surface physical properties that is not observed elsewhere on Ceres. △ Less

Submitted 7 October, 2020; originally announced October 2020.

Comments: 22 pages, 14 + 5 figures. Published online on Astronomy and Astrophysics on 07-10-2020

Journal ref: A&A 642, A74 (2020)

Space Project for Astrophysical and Cosmological Exploration (SPACE), an ESA stand-alone mission and a possible contribution to the Origins Space Telescope

Authors: Denis Burgarella, Andrew Bunker, Rychard Bouwens, Laurent Pagani, Jose Afonso, Hakim Atek, Marc Audard, Sylvie Cabrit, Karina Caputi, Laure Ciesla, Christopher Conselice, Asantha Cooray, Giovanni Cresci, Mirko Curti, Jose Miguel Rodriguez Espinosa, Marc Ferrari, Chiaki Kobayashi, Nadege Lagarde, Jesus Gallego Maestro, Roberto Maiolino, Katarzyna Malek, Filippo Mannucci, Julien Montillaud, Pascal Oesch, Chris Pearson , et al. (8 additional authors not shown)

Abstract: We propose a new mission called Space Project for Astrophysical and Cosmological Exploration (SPACE) as part on the ESA long term planning Voyage 2050 programme. SPACE will study galaxy evolution at the earliest times, with the key goals of charting the formation of the heavy elements, measuring the evolution of the galaxy luminosity function, tracing the build-up of stellar mass in galaxies over… ▽ More We propose a new mission called Space Project for Astrophysical and Cosmological Exploration (SPACE) as part on the ESA long term planning Voyage 2050 programme. SPACE will study galaxy evolution at the earliest times, with the key goals of charting the formation of the heavy elements, measuring the evolution of the galaxy luminosity function, tracing the build-up of stellar mass in galaxies over cosmic time, and finding the first super-massive black holes (SMBHs) to form. The mission will exploit a unique region of the parameter space, between the narrow ultra-deep surveys with HST and JWST, and shallow wide-field surveys such as Roman Space Telescope and EUCLID, and should yield by far the largest sample of any current or planned mission of very high redshift galaxies at z > 10 which are sufficiently bright for detailed follow-up spectroscopy. Crucially, we propose a wide-field spectroscopic near-IR + mid-IR capability which will greatly enhance our understanding of the first galaxies by detecting and identifying a statistical sample of the first galaxies and the first SMBH, and to chart the metal enrichment history of galaxies in the early Universe - potentially finding signatures of the very first stars to form from metal-free primordial gas. The wide-field and wavelength range of SPACE will also provide us a unique opportunity to study star formation by performing a wide survey of the Milky Way in the near-IR + mid-IR. This science project can be enabled either by a stand-alone ESA-led M mission or by an instrument for an L mission (with ESA and/or NASA, JAXA and other international space agencies) with a wide-field (sub-)millimetre capability at wavelength > 500 microns. △ Less

Submitted 5 August, 2020; v1 submitted 29 July, 2020; originally announced July 2020.

Comments: Submitted to Experimental Astronomy as one of the proposals for the European Space Agency Voyage 2050 Programme

CASTLE: performances and science cases

Authors: S. Lombardo, F. Prada, E. Hugot, S. Basa, J. M. Bautista, S. Boissier, A. Boselli, A. Bosma, J. C. Cuillandre, P. A. Duc, M. Ferrari, N. Grosso, L. Izzo, K. Joaquina, Junais, J. Koda, A. Lamberts, G. R. Lemaitre, A. Longobardi, D. Martínez-Delgado, E. Muslimov, J. L. Ortiz, E. Perez, D. Porquet, B. Sicardy , et al. (1 additional authors not shown)

Abstract: We present here the Calar Alto Schmidt-Lemaitre Telescope (CASTLE) concept, a technology demonstrator for curved detectors, that will be installed at the Calar Alto Observatory (Spain). This telescope has a wide field of view (2.36x1.56 deg^2) and a design, optimised to generate a Point Spread Function with very low level wings and reduced ghost features, which makes it considerably less susceptib… ▽ More We present here the Calar Alto Schmidt-Lemaitre Telescope (CASTLE) concept, a technology demonstrator for curved detectors, that will be installed at the Calar Alto Observatory (Spain). This telescope has a wide field of view (2.36x1.56 deg^2) and a design, optimised to generate a Point Spread Function with very low level wings and reduced ghost features, which makes it considerably less susceptible to several systematic effects usually affecting similar systems. These characteristics are particularly suited to study the low surface brightness Universe. CASTLE will be able to reach surface brightness orders of magnitude fainter than the sky background level and observe the extremely extended and faint features around galaxies such as tidal features, stellar halos, intra-cluster light, etc. CASTLE will also be used to search and detect astrophysical transients such as gamma ray bursts (GRB), gravitational wave optical counterparts, neutrino counterparts, etc. This will increase the number of precisely localized GRBs from 20% to 60% (in the case of Fermi/GMB GRBs). △ Less

Submitted 24 June, 2020; originally announced June 2020.

Comments: 29 pages, 11 figures

Stress mirror polishing for future large lightweight mirrors: design using shape optimization

Authors: Sabri Lemared, Marc Ferrari, Christian Du Jeu, Thibault Dufour, Nathalie Soulier, Emmanuel Hugot

Abstract: This study proposes a new way to manufacture large lightweight aspherics for space telescopes using Stress Mirror Polishing (SMP). This technique is well known to allow reaching high quality optical surfaces in a minimum time period, thanks to a spherical full-size polishing tool. To obtain the correct surface' aspheric shape, it is necessary to define precisely the thickness distribution of the m… ▽ More This study proposes a new way to manufacture large lightweight aspherics for space telescopes using Stress Mirror Polishing (SMP). This technique is well known to allow reaching high quality optical surfaces in a minimum time period, thanks to a spherical full-size polishing tool. To obtain the correct surface' aspheric shape, it is necessary to define precisely the thickness distribution of the mirror to be deformed, according to the manufacturing parameters. We first introduce active optics and Stress Mirror Polishing techniques, and then, we describe the process to obtain the appropriate thickness mirror distribution allowing to generate the required aspheric shape during polishing phase. Shape optimization procedure using PYTHON programing and NASTRAN optimization solver using Finite Element Model (FEM) is developed and discussed in order to assist this process. The main result of this paper is the ability of the shape optimization process to support SMP technique to generate a peculiar aspherical shape from a spherical optical surface thanks to a thickness distribution reshaping. This paper is primarily focused on a theoretical framework with numerical simulations as the first step before the manufacturing of a demonstrator. This two-steps approach was successfully used for previous projects. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: 18 pages, 17 figures

The Search for Living Worlds and the Connection to Our Cosmic Origins

Authors: M. A. Barstow, S. Aigrain, J. Barstow, M. Barthelemy, B. Biller, A. Bonanos, L. Buchhave, S. Casewell, C. Charbonnel, S. Charlot, R. Davies, N. Devaney, C. Evans, M. Ferrari, L. Fossatti, B. Gaensicke, M. Garcia, A. Gomez de Castro, T. Henning, C. Lintott, C. Knigge, C. Neiner, L. Rossi, C. Snodgrass, D. Stam , et al. (2 additional authors not shown)

Abstract: One of the most exciting scientific challenges is to detect Earth-like planets in the habitable zones of other stars in the galaxy and search for evidence of life. The ability to observe and characterise dozens of potentially Earth-like planets now lies within the realm of possibility due to rapid advances in key space and imaging technologies. The associated challenge of directly imaging very f… ▽ More One of the most exciting scientific challenges is to detect Earth-like planets in the habitable zones of other stars in the galaxy and search for evidence of life. The ability to observe and characterise dozens of potentially Earth-like planets now lies within the realm of possibility due to rapid advances in key space and imaging technologies. The associated challenge of directly imaging very faint planets in orbit around nearby very bright stars is now well understood, with the key instrumentation also being perfected and developed. Such advances will allow us to develop large transformative telescopes, covering a broad UV-optical-IR spectral range, which can carry out the detailed research programmes designed to answer the questions we wish to answer: Carry out high contrast imaging surveys of nearby stars to search for planets within their habitable zones. Characterise the planets detected to determine masses and radii from photometric measurements. Through spectroscopic studies of their atmospheres and surfaces, search for habitability indicators and for signs of an environment that has been modified by the presence of life. Active studies of potential missions have been underway for a number of years. The latest of these is the Large UV Optical IR space telescope (LUVOIR), one of four flagship mission studies commissioned by NASA in support of the 2020 US Decadal Survey. LUVOIR, if selected, will be of interest to a wide scientific community and will be the only telescope capable of searching for and characterizing a sufficient number of exoEarths to provide a meaningful answer to the question - Are we alone?. This paper is a submission to the European Space Agency Voyage 2050 call for white papers outlining the case for an ESA contribution to a Large UVOIR telescope. △ Less

Submitted 16 August, 2019; originally announced August 2019.

Comments: Submission to the European Space Agency Voyage 2050 call for white papers

Key Technologies for the Wide Field Infrared Survey Telescope Coronagraph Instrument

Authors: Vanessa P. Bailey, Lee Armus, Bala Balasubramanian, Pierre Baudoz, Andrea Bellini, Dominic Benford, Bruce Berriman, Aparna Bhattacharya, Anthony Boccaletti, Eric Cady, Sebastiano Calchi Novati, Kenneth Carpenter, David Ciardi, Brendan Crill, William Danchi, John Debes, Richard Demers, Kjetil Dohlen, Robert Effinger, Marc Ferrari, Margaret Frerking, Dawn Gelino, Julien Girard, Kevin Grady, Tyler Groff , et al. (62 additional authors not shown)

Abstract: The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is… ▽ More The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is a strong scientific driver for better performance, particularly at visible wavelengths. Future flagship mission concepts aim to image Earth analogues with visible light flux ratios of more than 10^10. CGI is a critical intermediate step toward that goal, with a predicted 10^8-9 flux ratio capability in the visible. CGI achieves this through improvements over current ground and space systems in several areas: (i) Hardware: space-qualified (TRL9) deformable mirrors, detectors, and coronagraphs, (ii) Algorithms: wavefront sensing and control; post-processing of integral field spectrograph, polarimetric, and extended object data, and (iii) Validation of telescope and instrument models at high accuracy and precision. This white paper, submitted to the 2018 NAS Exoplanet Science Strategy call, describes the status of key CGI technologies and presents ways in which performance is likely to evolve as the CGI design matures. △ Less

Submitted 13 January, 2019; originally announced January 2019.

Comments: Submitted in response to the 2018 NAS Exoplanet Science Strategy call. 5 pages, 2 figures

Design and modelling of spectrographs with holographic gratings on freeform surfaces

Authors: Eduard R. Muslimov, Marc Ferrari, Emmanuel Hugot, Jean-Claude Bouret, Coralie Neiner, Simona Lombardo, Gerard Lemaitre, Robert Grange, Ilya A. Guskov

Abstract: In the present paper we demonstrate the approach of using a holographic grating on a freeform surface for advanced spectrographs design. We discuss the surface and groove pattern description used for ray-tracing. Moreover, we present a general procedure of diffraction efficiency calculation, which accounts for the change of hologram recording and operation conditions across the surface. The primar… ▽ More In the present paper we demonstrate the approach of using a holographic grating on a freeform surface for advanced spectrographs design. We discuss the surface and groove pattern description used for ray-tracing. Moreover, we present a general procedure of diffraction efficiency calculation, which accounts for the change of hologram recording and operation conditions across the surface. The primary application of this approach is the optical design of the POLLUX spectropolarimeter for the LUVOR mission project where a freeform holographic grating operates simultaneously as a cross-disperser and a camera with high resolution and high dispersion. The medium ultraviolet channel design of POLLUX is considered in detail as an example. Its resolving power reaches [126,000-133,000] in the region of 118.5-195 nm. Also, we show a possibility to use a similar element working in transmission to build an unobscured double-Schmidt spectrograph. The spectral resolving power reaches 4000 in the region 350-550 nm and remains stable along the slit. △ Less

Submitted 26 December, 2018; originally announced December 2018.

Comments: 37 pages, 19 figures, 2 tables. arXiv admin note: substantial text overlap with arXiv:1805.09073

Journal ref: Opt. Eng. 57(12), 125105 (2018)

James Webb Space Telescope Optical Simulation Testbed V: Wide-field phase retrieval assessment

Authors: Iva Laginja, Greg Brady, Remi Soummer, Sylvain Egron, Christopher Moriarty, Charles-Philippe Lajoie, Aurelie Bonnefois, Vincent Michau, Elodie Choquet, Marc Ferrari, Lucie Leboulleux, Olivier Levecq, Mamadou N'Diaye, Marshall D. Perrin, Peter Petrone, Laurent Pueyo, Anand Sivaramakrishnan

Abstract: The James Webb Space Telescope (JWST) Optical Simulation Testbed (JOST) is a hardware simulator for wavefront sensing and control designed to produce JWST-like images. A model of the JWST three mirror anas- tigmat is realized with three lenses in the form of a Cooke triplet, which provides JWST-like optical quality over a field equivalent to a NIRCam module. An Iris AO hexagonally segmented mirror… ▽ More The James Webb Space Telescope (JWST) Optical Simulation Testbed (JOST) is a hardware simulator for wavefront sensing and control designed to produce JWST-like images. A model of the JWST three mirror anas- tigmat is realized with three lenses in the form of a Cooke triplet, which provides JWST-like optical quality over a field equivalent to a NIRCam module. An Iris AO hexagonally segmented mirror stands in for the JWST primary. This setup successfully produces images extremely similar to expected JWST in-flight point spread functions (PSFs), and NIRCam images from cryotesting, in terms of the PSF morphology and sampling relative to the diffraction limit. The segmentation of the primary mirror into subapertures introduces complexity into wavefront sensing and control (WFS&C) of large space based telescopes like JWST. JOST provides a platform for independent analysis of WFS&C scenarios for both commissioning and maintenance activities on such ob- servatories. We present an update of the current status of the testbed including both single field and wide-field alignment results. We assess the optical quality of JOST over a wide field of view to inform the future imple- mentation of different wavefront sensing algorithms including the currently implemented Linearized Algorithm for Phase Diversity (LAPD). JOST complements other work at the Makidon Laboratory at the Space Telescope Science Institute, including the High-contrast imager for Complex Aperture Telescopes (HiCAT) testbed, that investigates coronagraphy for segmented aperture telescopes. Beyond JWST we intend to use JOST for WFS&C studies for future large segmented space telescopes such as LUVOIR. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Comments: 13 pages, 6 figures

Journal ref: Proc. SPIE 10698, Space Telescopes and Instrumentation 2018: Optical, Infrared, and Millimeter Wave, 106983N (2018)

Curved detectors developments and characterization: application to astronomical instruments

Authors: Simona Lombardo, Thibault Behaghel, Bertrand Chambion, Wilfried Jahn, Emmanuel Hugot, Eduard Muslimov, Melanie Roulet, Marc Ferrari, Christophe Gaschet, Stéphane Caplet, David Henry

Abstract: Many astronomical optical systems have the disadvantage of generating curved focal planes requiring flattening optical elements to project the corrected image on flat detectors. The use of these designs in combination with a classical flat sensor implies an overall degradation of throughput and system performances to obtain the proper corrected image. With the recent development of curved sensor t… ▽ More Many astronomical optical systems have the disadvantage of generating curved focal planes requiring flattening optical elements to project the corrected image on flat detectors. The use of these designs in combination with a classical flat sensor implies an overall degradation of throughput and system performances to obtain the proper corrected image. With the recent development of curved sensor this can be avoided. This new technology has been gathering more and more attention from a very broad community, as the potential applications are multiple: from low-cost commercial to high impact scientific systems, to mass-market and on board cameras, defense and security, and astronomical community. We describe here the first concave curved CMOS detector developed within a collaboration between CNRS- LAM and CEA-LETI. This fully-functional detector 20 Mpix (CMOSIS CMV20000) has been curved down to a radius of Rc = 150 mm over a size of 24x32 mm^2 . We present here the methodology adopted for its characterization and describe in detail all the results obtained. We also discuss the main components of noise, such as the readout noise, the fixed pattern noise and the dark current. Finally we provide a comparison with the flat version of the same sensor in order to establish the impact of the curving process on the main characteristics of the sensor. △ Less

Submitted 5 July, 2018; originally announced July 2018.

Design of optical systems with toroidal curved detectors

Authors: Eduard Muslimov, Emmanuel Hugot, Marc Ferrari, Thibault Behaghel, Gerard R. Lemaitre, Melanie Roulet, Simona Lombardo

Abstract: We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured re-imaging three-mirror anastigmat as an example (f'=960 mm, F/5.3, FoV 4x4 degrees). By assuming that the image is focused on a toroidal detector surface and perform re-optimization, it becomes pos… ▽ More We consider using toroidal curved detectors to improve the performance of imaging optical systems. We demonstrate that some optical systems have an anamorphic field curvature. We consider an unobscured re-imaging three-mirror anastigmat as an example (f'=960 mm, F/5.3, FoV 4x4 degrees). By assuming that the image is focused on a toroidal detector surface and perform re-optimization, it becomes possible to obtain a notable gain in the image quality - up to 40 % in terms of the spot RMS radius. Through analytic computations and finite-element analysis, we demonstrate that this toroidal shape can be obtained by bending of a thinned detector in a relatively simple setup. △ Less

Submitted 21 June, 2018; originally announced June 2018.

Comments: 4 pages, 7 figures

Journal ref: Eduard Muslimov, Emmanuel Hugot, Marc Ferrari, Thibault Behaghel, Gerard R. Lemaitre, Melanie Roulet, and Simona Lombardo, "Design of optical systems with toroidal curved detectors," Opt. Lett. 43, 3092-3095 (2018)

Spectrographs with holographic gratings on freeform surfaces: design approach and application for the LUVOIR mission

Authors: Eduard Muslimov, Marc Ferrari, Emmanuel Hugot, Jean-Claude Bouret, Coralie Neiner, Simona Lombardo, Gerard Lemaitre, Robert Grange

Abstract: In the present paper we demonstrate the approach to use a holographic grating on a freeform surface for advanced spectrographs design. On the example POLLUX spectropolarimeter medium-UV channel we chow that such a grating can operate as a cross-disperser and a camera mirror at the same time. It provides the image quality high enough to reach the spectral resolving power of 126 359-133 106 between… ▽ More In the present paper we demonstrate the approach to use a holographic grating on a freeform surface for advanced spectrographs design. On the example POLLUX spectropolarimeter medium-UV channel we chow that such a grating can operate as a cross-disperser and a camera mirror at the same time. It provides the image quality high enough to reach the spectral resolving power of 126 359-133 106 between 11.5 and 195 nm, which is higher than the requirement. Also we show a possibility to use a similar element working in transmission to build an unobscured double-Schmidt spectrograph. The spectral resolving power reaches 2750 for a long slit. It is also shown that the parameters of both the gratings are feasible with the current technologies. △ Less

Submitted 23 May, 2018; originally announced May 2018.

Advanced optical designs of curved detectors-based two-mirrors unobscured telescopes

Authors: Eduard Muslimov, Emmanuel Hugot, Simona Lombardo, Melanie Roulet, Thibault Behaghel, Marc Ferrari, Wilfried Jahn

Abstract: In the present paper we consider a family of unobscured telescope designs with curved detectors. They are based on classical two-mirror schemes -- Ritchey-Chretien, Gregorian and Couder telescopes. It is shown that all the designs provide nearly diffraction limited image quality in the visible domain for $.4^\circ \times .4^\circ$ field of view with the f-number of 7. We also provide a brief ghost… ▽ More In the present paper we consider a family of unobscured telescope designs with curved detectors. They are based on classical two-mirror schemes -- Ritchey-Chretien, Gregorian and Couder telescopes. It is shown that all the designs provide nearly diffraction limited image quality in the visible domain for $.4^\circ \times .4^\circ$ field of view with the f-number of 7. We also provide a brief ghost analysis and point on special features of the systems with curved detectors. Finally, the detector surface shape obtained in each case is analyzed and its' technological feasibility is demonstrated. △ Less

Submitted 23 May, 2018; originally announced May 2018.

Curved detectors for wide field imaging systems: impact on tolerance analysis

Authors: Eduard Muslimov, Emmanuel Hugot, Simona Lombardo, Melanie Roulet, Thibault Behaghel, Marc Ferrari, Wilfried Jahn, Christophe Gaschet, Bertrand Chambion, David Henry

Abstract: In the present paper we consider quantitative estimation of the tolerances widening in optical systems with curved detectors. The gain in image quality allows to loosen the margins for manufacturing and assembling errors. On another hand, the requirements for the detector shape and positioning become more tight. We demonstrate both of the effects on example of two optical designs. The first one is… ▽ More In the present paper we consider quantitative estimation of the tolerances widening in optical systems with curved detectors. The gain in image quality allows to loosen the margins for manufacturing and assembling errors. On another hand, the requirements for the detector shape and positioning become more tight. We demonstrate both of the effects on example of two optical designs. The first one is a rotationally-symmetrical lens with focal length of 25 mm, f-ratio of 3.5 and field of view equal to 72$^\circ$, working in the visible domain. The second design is a three-mirror anastigmat telescope with focal length of 250 mm, f-ratio of 2.0 and field of view equal to $4^\circ \times 4^\circ$. In both of the cases use of curved detectors allow to increase the image quality and substantially decrease the requirements for manufacturing precision △ Less

Submitted 23 May, 2018; originally announced May 2018.

POLLUX: a UV spectropolarimeter for the LUVOIR space telescope project

Authors: Eduard Muslimov, Jean-Claude Bouret, Coralie Neiner, Arturo López Ariste, Marc Ferrari, Sébastien Vivès, Emmanuel Hugot, Robert Grange, Simona Lombardo, Louise Lopes, Josiane Costerate, Frank Brachet

Abstract: The present paper describes the current baseline optical design of POLLUX, a high-resolution spectropolarimeter for the future LUVOIR mission. The instrument will operate in the ultraviolet (UV) domain from 90 to 390 nm in both spectropolarimetric and pure spectroscopic modes. The working range is split between 3 channels -- far (90-124.5 nm), medium (118.5-195 nm) and near (195-390 nm) UV. Each o… ▽ More The present paper describes the current baseline optical design of POLLUX, a high-resolution spectropolarimeter for the future LUVOIR mission. The instrument will operate in the ultraviolet (UV) domain from 90 to 390 nm in both spectropolarimetric and pure spectroscopic modes. The working range is split between 3 channels -- far (90-124.5 nm), medium (118.5-195 nm) and near (195-390 nm) UV. Each of the channels is composed of a polarimeter followed by an echelle spectrograph consisting of a classical off-axis paraboloid collimator, echelle grating with a high grooves frequency and a cross-disperser grating operating also as a camera. The latter component integrates some advanced technologies: it is a blazed grating with a complex grooves pattern formed by holographic recording, which is manufactured on a freeform surface. One of the key features underlying the current design is the large spectral length of each order ~6 nm, which allows to record wide spectral lines without any discontinuities. The modelling results show that the optical design will provide the required spectral resolving power higher than R ~ 120,000 over the entire working range for a point source object with angular size of 30 mas. It is also shown that with the 15-m primary mirror of the LUVOIR telescope the instrument will provide an effective collecting area up to 38 569 cm 2. Such a performance will allow to perform a number of groundbreaking scientific observations. Finally, the future work and the technological risks of the design are discussed in details. △ Less

Submitted 23 May, 2018; originally announced May 2018.

A fast, wide-field and distortion-free telescope with curved detectors for surveys at ultra-low surface brightness

Authors: Eduard Muslimov, David Valls-Gabaud, Gérard Lemaître, Emmanuel Hugot, Wilfred Jahn, Simona Lombardo, Xin Wang, Pascal Vola, Marc Ferrari

Abstract: We present the design of an all-reflective, bi-folded Schmidt telescope aimed at surveys of extended astronomical objects with extremely-low surface brightness. The design leads to a high image quality without any diffracting spider, along with a large aperture and field of view, with a small central obstruction which barely alters the PSF. As an example, we present the design of a high-quality, 3… ▽ More We present the design of an all-reflective, bi-folded Schmidt telescope aimed at surveys of extended astronomical objects with extremely-low surface brightness. The design leads to a high image quality without any diffracting spider, along with a large aperture and field of view, with a small central obstruction which barely alters the PSF. As an example, we present the design of a high-quality, 36 cm diameter, fast ( f /2.5) telescope working in the visible with a large field of view (1.6°x 2.6°). The telescope can operate with a curved detector (or with a flat detector with a field flattener) and a set of filters. The entrance mirror is anamorphic and replaces the classical Schmidt entrance corrector plate. We show that this anamorphic primary mirror can be manufactured through stress polishing, avoiding high spatial frequency errors, and tested with a simple interferometer scheme. This prototype is intended to serve as a fast-track scientific and technological pathfinder for the future space-based MESSIER mission. △ Less

Submitted 25 October, 2017; v1 submitted 24 October, 2017; originally announced October 2017.

Comments: 10 pages, 10 figures, 2 tables

Journal ref: Appl. Opt. 56, 8639-8647 (2017)

Combining freeform optics and curved detectors for wide field imaging: a polynomial approach over squared aperture

Authors: Eduard Muslimov, Emmanuel Hugot, Wilfried Jahn, Sebastien Vives, Marc Ferrari, Bertrand Chambion, David Henry, Cristophe Gaschet

Abstract: In the recent years a significant progress was achieved in the field of design and fabrication of optical systems based on freeform optical surfaces. They provide a possibility to build fast, wide-angle and high-resolution systems, which are very compact and free of obscuration. However, the field of freeform surfaces design techniques still remains underexplored. In the present paper we use the m… ▽ More In the recent years a significant progress was achieved in the field of design and fabrication of optical systems based on freeform optical surfaces. They provide a possibility to build fast, wide-angle and high-resolution systems, which are very compact and free of obscuration. However, the field of freeform surfaces design techniques still remains underexplored. In the present paper we use the mathematical apparatus of orthogonal polynomials defined over a square aperture, which was developed before for the tasks of wavefront reconstruction, to describe shape of a mirror surface. Two cases, namely Legendre polynomials and generalization of the Zernike polynomials on a square, are considered. The potential advantages of these polynomials sets are demonstrated on example of a three-mirror unobscured telescope with F/#=2.5 and FoV=7.2x7.2°. In addition, we discuss possibility of use of curved detectors in such a design. △ Less

Submitted 17 June, 2017; originally announced June 2017.

Comments: 14 pages, 10 figures, 5 tables, to be published in Optics Express Vol. 25, Iss. 13 - June 26, 2017

Journal ref: Optics Express Vol. 25, Issue 13, pp. 14598-14610 (2017)

Flexible focal plane arrays for UVOIR wide field instrumentation

Authors: Emmanuel Hugot, Wilfried Jahn, Bertrand Chambion, Gaid Moulin, Liubov Nikitushkina, Christophe Gaschet, David Henry, Stéphane Getin, Marc Ferrari, Yann Gaeremynck

Abstract: LAM and CEA-LETI are developing the technology of deformable detectors, for UV, VIS or NIR applications. Such breakthrough devices will be a revolution for future wide field imagers and spectrographs, firstly by improving the image quality with better off-axis sharpness, resolution, brightness while scaling down the optical system, secondly by overcoming the manufacturing issues identified so far… ▽ More LAM and CEA-LETI are developing the technology of deformable detectors, for UV, VIS or NIR applications. Such breakthrough devices will be a revolution for future wide field imagers and spectrographs, firstly by improving the image quality with better off-axis sharpness, resolution, brightness while scaling down the optical system, secondly by overcoming the manufacturing issues identified so far and by offering a flexibility and versatility in optical design. The technology of curved detectors can benefit of the developments of active and deformable structures, to provide a flexibility and a fine tuning of the detectors curvature by thinning down the substrate without modifying the fabrication process of the active pixels. We present studies done so far on optical design improvements, the technological demonstrators we developed and their performances as well as the future five-years roadmap for these developments. △ Less

Submitted 21 July, 2016; originally announced July 2016.

Comments: SPIE proceeding on Astronomical Telescopes and Instrumentation, 9 pages, 12 figures

Apodization in high-contrast long-slit spectroscopy. II. Concept validation and first on-sky results with VLT/SPHERE

Authors: A. Vigan, M. N'Diaye, K. Dohlen, J. -L. Beuzit, A. Costille, A. Caillat, A. Baruffolo, P. Blanchard, M. Carle, M. Ferrari, T. Fusco, L. Gluck, E. Hugot, M. Jaquet, M. Langlois, D. Le Mignant, M. Llored, F. Madec, D. Mouillet, A. Origné, P. Puget, B. Salasnich, J. -F. Sauvage

Abstract: Spectral characterization of young, giant exoplanets detected by direct imaging is one of the tasks of the new generation of high-contrast imagers. For this purpose, the VLT/SPHERE instrument includes a unique long-slit spectroscopy (LSS) mode coupled with Lyot coronagraphy in its infrared dual-band imager and spectrograph (IRDIS). The performance of this mode is intrinsically limited by the use o… ▽ More Spectral characterization of young, giant exoplanets detected by direct imaging is one of the tasks of the new generation of high-contrast imagers. For this purpose, the VLT/SPHERE instrument includes a unique long-slit spectroscopy (LSS) mode coupled with Lyot coronagraphy in its infrared dual-band imager and spectrograph (IRDIS). The performance of this mode is intrinsically limited by the use of a non-optimal coronagraph, but in a previous work we demonstrated that it could be significantly improved at small inner-working angles using the stop-less Lyot coronagraph (SLLC). We now present the development, testing, and validation of the first SLLC prototype for VLT/SPHERE. Based on the transmission profile previously proposed, the prototype was manufactured using microdots technology and was installed inside the instrument in 2014. The transmission measurements agree well with the specifications, except in the very low transmissions (<5% in amplitude). The performance of the SLLC is tested in both imaging and spectroscopy using data acquired on the internal source. In imaging, we obtain a raw contrast gain of a factor 10 at 0.3" and 5 at 0.5" with the SLLC. Using data acquired with a focal-plane mask, we also demonstrate that no Lyot stop is required to reach the full performance, which validates the SLLC concept. Comparison with a realistic simulation model shows that we are currently limited by the internal phase aberrations of SPHERE. In spectroscopy, we obtain a gain of ~1 mag in a limited range of angular separations. Simulations show that although the main limitation comes from phase errors, the performance in the non-SLLC case is very close to the ultimate limit of the LSS mode. Finally, we obtain the very first on-sky data with the SLLC, which appear extremely promising for the future scientific exploitation of an apodized LSS mode in SPHERE. △ Less

Submitted 16 December, 2015; originally announced December 2015.

Comments: 13 pages, 13 figures. Accepted for publication in A&A

Journal ref: A&A 586, A144 (2016)

Active optics for high-dynamic variable curvature mirrors

Authors: Emmanuel Hugot, Marc Ferrari, Gerard R. Lemaitre, Fabrice Madec, Sebastien Vives, Elodie Chardin, David Le Mignant, Jean Gabriel Cuby

Abstract: Variable curvature mirrors of large amplitude are designed by using finite element analysis. The specific case studied reaches at least a 800 μm sag with an optical quality better than λ/5 over a 120 mm clear aperture. We highlight the geometrical nonlinearity and the plasticity effect. Variable curvature mirrors of large amplitude are designed by using finite element analysis. The specific case studied reaches at least a 800 μm sag with an optical quality better than λ/5 over a 120 mm clear aperture. We highlight the geometrical nonlinearity and the plasticity effect. △ Less

Submitted 18 November, 2014; originally announced November 2014.

Comments: 3 pages, 4 figures

Journal ref: Optics Letters, Vol. 34, Issue 19, pp. 3009-3011 (2009)

Design and development of a freeform active mirror for an astronomy application

Authors: Zalpha Challita, Tibor Agócs, Emmanuel Hugot, Attila Jaskó, Gabby Kroes, William Taylor, Chris Miller, Hermine Schnetler, Lars Venema, Laszlo Mosoni, David Le Mignant, Marc Ferrari, Jean-Gabriel Cuby

Abstract: The advent of extremely large telescopes will bring unprecedented light-collecting power and spatial resolution, but it will also lead to a significant increase in the size and complexity of focal-plane instruments. The use of freeform mirrors could drastically reduce the number of components in optical systems. Currently, manufacturing issues limit the common use of freeform mirrors at short wave… ▽ More The advent of extremely large telescopes will bring unprecedented light-collecting power and spatial resolution, but it will also lead to a significant increase in the size and complexity of focal-plane instruments. The use of freeform mirrors could drastically reduce the number of components in optical systems. Currently, manufacturing issues limit the common use of freeform mirrors at short wavelengths. This article outlines the use of freeform mirrors in astronomical instruments with a description of two efficient freeform optical systems. A new manufacturing method is presented which seeks to overcome the manufacturing issues through hydroforming of thin polished substrates. A specific design of an active array is detailed, which will compensate for residual manufacturing errors, thermoelastic deformation, and gravity-induced errors during observations. The combined hydroformed mirror and the active array comprise the Freeform Active Mirror Experiment, which will produce an accurate, compact, and stable freeform optics dedicated to visible and near-infrared observations. △ Less

Submitted 17 November, 2014; originally announced November 2014.

Comments: 11 pages, 12 figures

Journal ref: Opt. Eng. 53(3), 031311 ( 2014)

Compensation of high-order quasi-static aberrations on SPHERE with the coronagraphic phase diversity (COFFEE)

Authors: B. Paul, J. -F. Sauvage, L. M. Mugnier, K. Dohlen, C. Petit, T. Fusco, D. Mouillet, J. -L. Beuzit, M. Ferrari

Abstract: The second-generation instrument SPHERE, dedicated to high-contrast imaging, will soon be in operation on the European Very Large Telescope. Such an instrument relies on an extreme adaptive optics system coupled with a coronagraph that suppresses most of the diffracted stellar light. However, the coronagraph performance is strongly limited by quasi-static aberrations that create long-lived speckle… ▽ More The second-generation instrument SPHERE, dedicated to high-contrast imaging, will soon be in operation on the European Very Large Telescope. Such an instrument relies on an extreme adaptive optics system coupled with a coronagraph that suppresses most of the diffracted stellar light. However, the coronagraph performance is strongly limited by quasi-static aberrations that create long-lived speckles in the scientific image plane, which can easily be mistaken for planets. The ultimate performance is thus limited by the unavoidable differential aberrations between the wave-front sensor and the scientific camera, which have to be estimated andcompensated for. In this paper, we use the COFFEE approach to measure and compensate for SPHERE's quasi-static aberrations. COFFEE (for COronagraphic Focal-plane wave-Front Estimation for Exoplanet detection), which consists in an extension of phase diversity to coronagraphic imaging, estimates the quasi-static aberrations, including the differential ones, using only two focal plane images recorded by the scientific camera. In this paper, we use coronagraphic images recorded from SPHERE's infrared detector IRDIS to estimate the aberrations upstream of the coronagraph, which are then compensated for using SPHERE's extreme adaptive optics loop SAXO. We first validate the ability of COFFEE to estimate high-order aberrations by estimating a calibrated influence function pattern introduced upstream of the coronagraph. We then use COFFEE in an original iterative compensation process to compensate for the estimated aberrations, leading to a contrast improvement by a factor that varies from 1.4 to 4.7 between 2l/D and 15l/D on IRDIS. The performance of the compensation process is also evaluated through simulations. An excellent match between experimental results and these simulations is found. △ Less

Submitted 8 September, 2014; originally announced September 2014.

Comments: Accepted in Astronomy & Astrophysics

Local ensemble transform Kalman filter, a fast non-stationary control law for adaptive optics on ELTs: theoretical aspects and first simulation results

Authors: Morgan Gray, Cyril Petit, Sergey Rodionov, Marc Bocquet, Laurent Bertino, Marc Ferrari, Thierry Fusco

Abstract: We propose a new algorithm for an adaptive optics system control law, based on the Linear Quadratic Gaussian approach and a Kalman Filter adaptation with localizations. It allows to handle non-stationary behaviors, to obtain performance close to the optimality defined with the residual phase variance minimization criterion, and to reduce the computational burden with an intrinsically parallel impl… ▽ More We propose a new algorithm for an adaptive optics system control law, based on the Linear Quadratic Gaussian approach and a Kalman Filter adaptation with localizations. It allows to handle non-stationary behaviors, to obtain performance close to the optimality defined with the residual phase variance minimization criterion, and to reduce the computational burden with an intrinsically parallel implementation on the Extremely Large Telescopes (ELTs). △ Less

Submitted 29 August, 2014; originally announced August 2014.

Comments: This paper was published in Optics Express and is made available as an electronic reprint with the permission of OSA. The paper can be found at the following URL on the OSA website: http://www.opticsinfobase.org/oe/ . Systematic or multiple reproduction or distribution to multiple locations via electronic or other means is prohibited and is subject to penalties under law

Journal ref: Optics Express, Vol. 22, Issue 17, pp. 20894-20913 (2014)

High-contrast imager for Complex Aperture Telescopes (HiCAT): 2. Design overview and first light results

Authors: Mamadou N'Diaye, Elodie Choquet, Sylvain Egron, Laurent Pueyo, Lucie Leboulleux, Olivier Levecq, Marshall D. Perrin, Erin Elliot, J. Kent Wallace, Emmanuel Hugot, Michel Marcos, Marc Ferrari, Chris A. Long, Rachel Anderson, Audrey DiFelice, Rémi Soummer

Abstract: We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spr… ▽ More We present a new high-contrast imaging testbed designed to provide complete solutions in wavefront sensing, control and starlight suppression with complex aperture telescopes. The testbed was designed to enable a wide range of studies of the effects of such telescope geometries, with primary mirror segmentation, central obstruction, and spiders. The associated diffraction features in the point spread function make high-contrast imaging more challenging. In particular the testbed will be compatible with both AFTA-like and ATLAST-like aperture shapes, respectively on-axis monolithic, and on-axis segmented telescopes. The testbed optical design was developed using a novel approach to define the layout and surface error requirements to minimize amplitude-induced errors at the target contrast level performance. In this communication we compare the as-built surface errors for each optic to their specifications based on end-to-end Fresnel modeling of the testbed. We also report on the testbed optical and optomechanical alignment performance, coronagraph design and manufacturing, and preliminary first light results. △ Less

Submitted 3 July, 2014; originally announced July 2014.

Comments: Proc. of the SPIE 2014, 9143-71. 11 pages, 8 figures

Mirror actively deformed and regulated for applications in space: design and performance

Authors: Marie Laslandes, Emmanuel Hugot, Marc Ferrari, Claire Hourtoule, Christian Singer, Christophe Devilliers, Celine Lopez, Frederic Chazallet

Abstract: The need for both high quality images and lightweight structures is one of the main drivers in space telescope design. An efficient wavefront control system will become mandatory in future large observatories, retaining performance while relaxing specifications in the global system's stability. We present the mirror actively deformed and regulated for applications in space project, which aims to d… ▽ More The need for both high quality images and lightweight structures is one of the main drivers in space telescope design. An efficient wavefront control system will become mandatory in future large observatories, retaining performance while relaxing specifications in the global system's stability. We present the mirror actively deformed and regulated for applications in space project, which aims to demonstrate the applicability of active optics for future space instrumentation. It has led to the development of a 24-actuator, 90-mm-diameter active mirror, able to compensate for large lightweight primary mirror deformations in the telescope's exit pupil. The correcting system has been designed for expected wavefront errors from 3-m-class lightweight primary mirrors, while also taking into account constraints for space use. Finite element analysis allowed an optimization of the system in order to achieve a precision of correction better than 10 nm rms. A dedicated testbed has been designed to fully characterize the integrated system performance in representative operating conditions. It is composed of: a telescope simulator, an active correction loop, a point spread function imager, and a Fizeau interferometer. All conducted tests demonstrated the correcting mirror performance and has improved this technology maturity to a TRL4. △ Less

Submitted 2 May, 2013; originally announced May 2013.

Comments: 12 pages, 12 figures

Journal ref: Optical Engineering, volume 52, Issue 9, Special Section on Space Telescopes II, 091803 (2013)

Active optics: deformable mirrors with a minimum number of actuators

Authors: Marie Laslandes, Emmanuel Hugot, Marc Ferrari

Abstract: We present two concepts of deformable mirror to compensate for first order optical aberrations. Deformation systems are designed using both elasticity theory and Finite Element Analysis in order to minimize the number of actuators. Starting from instrument specifications, we explain the methodology to design dedicated deformable mirrors. The work presented here leads to correcting devices optimize… ▽ More We present two concepts of deformable mirror to compensate for first order optical aberrations. Deformation systems are designed using both elasticity theory and Finite Element Analysis in order to minimize the number of actuators. Starting from instrument specifications, we explain the methodology to design dedicated deformable mirrors. The work presented here leads to correcting devices optimized for specific functions. The Variable Off-Axis paraboLA concept is a 3-actuators, 3-modes system able to generate independently Focus, Astigmatism and Coma. The Correcting Optimized Mirror with a Single Actuator is a 1-actuator system able to generate a given combination of optical aberrations. △ Less

Submitted 12 September, 2012; originally announced September 2012.

Comments: 13 pages, 9 figures, published in JEOS

Journal ref: Journal of the European Optical Society, Volume 7, 12036, 2012

Diversity among other worlds: characterization of exoplanets by direct detection

Authors: J. Schneider, A. Boccaletti, A. Aylward, P. Baudoz, J. -L. Beuzit, R. Brown, J. Cho, K. Dohlen, M. Ferrari, R. Galicher, O. Grasset, L. Grenfell, J. -M. Griessmeier, O. Guyon, J. Hough, M. Kasper, Ch. Keller, A. Longmore, B. Lopez, E. Martin, D. Mawet, F. Menard, B. Merin, E. Palle, G. Perrin , et al. (12 additional authors not shown)

Abstract: The physical characterization of exoplanets will require to take spectra at several orbital positions. For that purpose, a direct imaging capability is necessary. Direct imaging requires an efficient stellar suppression mechanism, associated with an ultrasmooth telescope. We show that before future large space missions (interferometer, 4-8 m class coronograph, external occulter or Fresnel imager… ▽ More The physical characterization of exoplanets will require to take spectra at several orbital positions. For that purpose, a direct imaging capability is necessary. Direct imaging requires an efficient stellar suppression mechanism, associated with an ultrasmooth telescope. We show that before future large space missions (interferometer, 4-8 m class coronograph, external occulter or Fresnel imager), direct imaging of giant planets and close-by super-Earth are at the cross-road of a high scientific interest and a reasonable feasibility. The scientific interest lies in the fact that super-Earths share common geophysical attributes with Earths. They already begin to be detected by radial velocity (RV) and, together with giant planets, they have a larger area than Earths, making them detectable with a 1.5-2 m class telescope in reflected light. We propose such a (space) telescope be a first step before large direct imaging missions. △ Less

Submitted 4 December, 2008; v1 submitted 15 November, 2008; originally announced November 2008.

Comments: Update of a White Paper submitted to the ESA ExoPlanet Roadmap Advisory Team

The Wide-field High-resolution Infrared TElescope (WHITE)

Authors: D. Burgarella, B. Le Roux, M. Langlois, G. Moretto, T. Fusco, M. Ferrari

Abstract: The Wide-field High-resolution Infrared TElescope (WHITE) will be dedicated in the first years of its life to carrying out a few (well focused in terms of science objectives and time) legacy surveys. WHITE would have an angular resolution of ~0.3'' homogeneous over ~0.7 sq. deg. in the wavelength range 1 - 5 um, which means that we will very efficiently use all the available observational time… ▽ More The Wide-field High-resolution Infrared TElescope (WHITE) will be dedicated in the first years of its life to carrying out a few (well focused in terms of science objectives and time) legacy surveys. WHITE would have an angular resolution of ~0.3'' homogeneous over ~0.7 sq. deg. in the wavelength range 1 - 5 um, which means that we will very efficiently use all the available observational time during night time and day time. Moreover, the deepest observations will be performed by summing up shorter individual frames. We will have a temporal information that can be used to study variable objects. The three key science objectives of WHITE are : 1) A complete survey of the Magellanic Clouds to make a complete census of young stellar objects in the clouds and in the bridge and to study their star formation history and the link with the Milky Way. The interaction of the two clouds with our Galaxy might the closest example of a minor merging event that could be the main driver of galaxy evolution in the last 5 Gyrs. 2) The building of the first sample of dusty supernovae at z<1.2 in the near infrared range (1-5 um) to constrain the equation of state from these obscured objects, study the formation of dust in galaxies and build the first high resolution sample of high redshift galaxies observed in their optical frame 3) A very wide weak lensing survey over that would allow to estimate the equation of state in a way that would favourably compete with space projects. △ Less

Submitted 5 February, 2008; originally announced February 2008.

Comments: Invited talk to the 2nd ARENA Conference : "The Astrophysical Science Cases at Dome C" Potsdam 17-21 September, 2007

Wide Field Astronomy at Dome C: two IR surveys complementary to SNAP

Authors: D. Burgarella, M. Ferrari, T. Fusco, M. Langlois, B. Leroux, G. Moretto, M. Nicole

Abstract: Surveys provide a wealth of data to the astronomical community that are used well after their completion. In this paper, we propose a project that would take the maximum benefit of Dome C in Antarctica by performing two surveys, in the wavelength range from 1-5 micron, complementary to SNAP space surveys. The first one over 1000 sq. deg. (1 KdF) for 4 years and the second one over 15 sq. deg (SN… ▽ More Surveys provide a wealth of data to the astronomical community that are used well after their completion. In this paper, we propose a project that would take the maximum benefit of Dome C in Antarctica by performing two surveys, in the wavelength range from 1-5 micron, complementary to SNAP space surveys. The first one over 1000 sq. deg. (1 KdF) for 4 years and the second one over 15 sq. deg (SNAP-IR) for the next 4 years at the same time as SNAP 0.35-1.7 microns survey. By using a Ground-Layer Adaptive Optics system, we would be able to recover, at the ice level and over at least half a degree in radius, the 300 mas angular resolution available above the 30-m high turbulent layer. Such a survey, combining a high angular resolution with high sensitivities in the NIR and MIR, should also play the role of a pre-survey for JWST and ALMA. △ Less

Submitted 17 November, 2006; originally announced November 2006.

Comments: Invited contribution to the 1st ARENA Conference on "Large Astronomical Infrastructures at CONCORDIA, prospects and constraints for Antarctic optical/IR Astronomy": 8 pages, 5 Postscript figures

Liquid Mirror Telescopes: A progress report

Authors: Ermanno F. Borra, Marc Ferrari, Luc Girard, Gilberto Moretto, Gregoire Tremblay, Gerard Lemaitre

Abstract: We review the present status of liquid mirror telescopes. Interferometric tests of liquid mirrors (the largest one having a diameter of 2.5 meters ) show excellent optical qualities. The basic technology is now sufficiently reliable that it can be put to work. Indeed, a handful of liquid mirrors have now been built that are used for scientific work. A 3.7-m diameter LMT is presently being built… ▽ More We review the present status of liquid mirror telescopes. Interferometric tests of liquid mirrors (the largest one having a diameter of 2.5 meters ) show excellent optical qualities. The basic technology is now sufficiently reliable that it can be put to work. Indeed, a handful of liquid mirrors have now been built that are used for scientific work. A 3.7-m diameter LMT is presently being built in the new Laval upgraded testing facilities. Construction of the mirror can be followed on the Web site: http://astrosun.phy.ulaval.ca/lmt/lmt- home.html. Finally we address the issue of the field accessible to LMTs equipped with novel optical correctors. Optical design work, and some exploratory laboratory work, indicate that a single LMT should be able to access, with excellent images, small regions anywhere inside fields as large as 45 degrees. △ Less

Submitted 23 August, 1996; originally announced August 1996.

Comments: To appear in the SPIE conference proceedings 'Optical Telescopes of Today and Tomorrow', May 29 - June1, Landskrona/Hven, Sweden, Additional info on LMs at: http://astrosun.phy.ulaval.ca/lmt/lmt-home.html

Active vase mirrors warped by Zernike polynomials for Correcting off-axis aberrations of fixed primary mirrors. Part 2 - Optical testing and performance evaluation

Authors: G. Moretto, G. R. LemaitreT. Bactivelane, M. Wang, M. Ferrari, S. Mazzanti, B. Di Biagio, E. F. Borra

Abstract: We investigate the aspherization of an active mirror for correcting third and fifth-order aberrations. We use a stainless steel AISI 420 mirror with a controlled pressure load, two series of 12-punctual radial positions of force application distributed symmetrically in two concentric rings around the mirror. We obtain the wavefronts for Cv1, Sph3, Coma3, Astm3, Comatri, Astm5 aswell as those of… ▽ More We investigate the aspherization of an active mirror for correcting third and fifth-order aberrations. We use a stainless steel AISI 420 mirror with a controlled pressure load, two series of 12-punctual radial positions of force application distributed symmetrically in two concentric rings around the mirror. We obtain the wavefronts for Cv1, Sph3, Coma3, Astm3, Comatri, Astm5 aswell as those of the added wavefronts. Although this active prototype mirror has general uses, our goal is to compensate the aberrations of a liquid mirror observing at large angles from the zenith. △ Less

Submitted 4 April, 1995; originally announced April 1995.

Comments: 8 pages of uuencoded compressed postscript, including 9 figures, 7 figure sent upon request. To appear in Astronomy & Astrophysics Suppl

Report number: EFB93