-
Magnetoresistance and Anisotropic Spin Dynamics in Antiferromagnetic Semiconductor Eu$_5$Sn$_2$As$_6$
Authors:
R. P. Day,
K. Yamakawa,
L. Pritchard Cairns,
J. Singleton,
Monica Allen,
Joel E. Moore,
James G. Analytis
Abstract:
We report on the thermodynamic and transport properties of the rare-earth Zintl compound Eu$_5$Sn$_2$As$_6$, which orders as a canted antiferromagnetic magnetic semiconductor at 10.3~K. The system also displays a complex cascade of magnetic phases arising from geometric and magnetic exchange frustration, with high sensitivity to the application and direction of small magnetic fields. At low temper…
▽ More
We report on the thermodynamic and transport properties of the rare-earth Zintl compound Eu$_5$Sn$_2$As$_6$, which orders as a canted antiferromagnetic magnetic semiconductor at 10.3~K. The system also displays a complex cascade of magnetic phases arising from geometric and magnetic exchange frustration, with high sensitivity to the application and direction of small magnetic fields. At low temperature, Eu$_5$Sn$_2$As$_6$ exhibits negative colossal magnetoresistance of up to a factor of $6\times10^3$. This may be a lower bound as the conductivity appears to be shunted by an unknown conduction channel, causing the resistivity to saturate. Mechanisms for the low temperature saturation of resistivity are discussed.
△ Less
Submitted 8 July, 2024;
originally announced July 2024.
-
Ultrafast measurements of mode-specific deformation potentials of Bi$_2$Te$_3$ and Bi$_2$Se$_3$
Authors:
Yijing Huang,
José D. Querales-Flores,
Samuel W. Teitelbaum,
Jiang Cao,
Thomas Henighan,
Hanzhe Liu,
Mason Jiang,
Gilberto De la Peña,
Viktor Krapivin,
Johann Haber,
Takahiro Sato,
Matthieu Chollet,
Diling Zhu,
Tetsuo Katayama,
Robert Power,
Meabh Allen,
Costel R. Rotundu,
Trevor P. Bailey,
Ctirad Uher,
Mariano Trigo,
Patrick S. Kirchmann,
Éamonn D. Murray,
Zhi-Xun Shen,
Ivana Savic,
Stephen Fahy
, et al. (2 additional authors not shown)
Abstract:
Quantifying electron-phonon interactions for the surface states of topological materials can provide key insights into surface-state transport, topological superconductivity, and potentially how to manipulate the surface state using a structural degree of freedom. We perform time-resolved x-ray diffraction (XRD) and angle-resolved photoemission (ARPES) measurements on Bi$_2$Te$_3$ and Bi$_2$Se…
▽ More
Quantifying electron-phonon interactions for the surface states of topological materials can provide key insights into surface-state transport, topological superconductivity, and potentially how to manipulate the surface state using a structural degree of freedom. We perform time-resolved x-ray diffraction (XRD) and angle-resolved photoemission (ARPES) measurements on Bi$_2$Te$_3$ and Bi$_2$Se$_3$, following the excitation of coherent A$_{1g}$ optical phonons. We extract and compare the deformation potentials coupling the surface electronic states to local A$_{1g}$-like displacements in these two materials using the experimentally determined atomic displacements from XRD and electron band shifts from ARPES.We find the coupling in Bi$_2$Te$_3$ and Bi$_2$Se$_3$ to be similar and in general in agreement with expectations from density functional theory. We establish a methodology that quantifies the mode-specific electron-phonon coupling experimentally, allowing detailed comparison to theory. Our results shed light on fundamental processes in topological insulators involving electron-phonon coupling.
△ Less
Submitted 22 July, 2023;
originally announced July 2023.
-
Dynamic twisting and imaging of moiré crystals
Authors:
Qixuan Zhang,
Trevor Senaha,
Ruolun Zhang,
Chen Wu,
Lingyuan Lyu,
Leonard W. Cao,
Jason Tresback,
Andrew Dai,
Kenji Watanabe,
Takashi Taniguchi,
Monica T. Allen
Abstract:
The electronic band structure is an intrinsic property of solid-state materials that is intimately connected to the crystalline arrangement of atoms. Moiré crystals, which emerge in twisted stacks of atomic layers, feature a band structure that can be continuously tuned by changing the twist angle between adjacent layers. This class of artificial materials blends the discrete nature of the moiré s…
▽ More
The electronic band structure is an intrinsic property of solid-state materials that is intimately connected to the crystalline arrangement of atoms. Moiré crystals, which emerge in twisted stacks of atomic layers, feature a band structure that can be continuously tuned by changing the twist angle between adjacent layers. This class of artificial materials blends the discrete nature of the moiré superlattice with intrinsic symmetries of the constituent materials, providing a versatile platform for investigation of correlated phenomena whose origins are rooted in the geometry of the superlattice, from insulating states at "magic angles" to flat bands in quasicrystals. Here we present a route to mechanically tune the twist angle of individual atomic layers with a precision of a fraction of a degree inside a scanning probe microscope, which enables continuous control of the electronic band structure in-situ. Using nanostructured rotor devices, we achieve the collective rotation of a single layer of atoms with minimal deformation of the crystalline lattice. In twisted bilayer graphene, we demonstrate nanoscale control of the moiré superlattice period via external rotations, as revealed using piezoresponse force microscopy. We also extend this methodology to create twistable boron nitride devices, which could enable dynamic control of the domain structure of moiré ferroelectrics. This approach provides a route for real-time manipulation of moiré materials, allowing for systematic exploration of the phase diagrams at multiple twist angles in a single device.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
MilliKelvin microwave impedance microscopy in a dry dilution refrigerator
Authors:
Leonard Weihao Cao,
Chen Wu,
Rajarshi Bhattacharyya,
Ruolun Zhang,
Monica T. Allen
Abstract:
Microwave impedance microscopy (MIM) is a near-field imaging technique that has been used to visualize the local conductivity of materials with nanoscale resolution across the GHz regime. In recent years, MIM has shown great promise for the investigation of topological states of matter, correlated electronic states and emergent phenomena in quantum materials. To explore these low-energy phenomena,…
▽ More
Microwave impedance microscopy (MIM) is a near-field imaging technique that has been used to visualize the local conductivity of materials with nanoscale resolution across the GHz regime. In recent years, MIM has shown great promise for the investigation of topological states of matter, correlated electronic states and emergent phenomena in quantum materials. To explore these low-energy phenomena, many of which are only detectable in the milliKelvin regime, we have developed a novel low-temperature MIM incorporated into a dilution refrigerator. This setup which consists of a tuning-fork-based atomic force microscope with microwave reflectometry capabilities, is capable of reaching temperatures down to 70 mK during imaging and magnetic fields up to 9 T. To test the performance of this microscope, we demonstrate microwave imaging of the conductivity contrast between graphite and silicon dioxide at cryogenic temperatures and discuss the resolution and noise observed in these results. We extend this methodology to visualize edge conduction in Dirac semimetal cadmium arsenide in the quantum Hall regime
△ Less
Submitted 29 September, 2023; v1 submitted 5 May, 2023;
originally announced May 2023.
-
Theory of the microwave impedance microscopy of Chern insulators
Authors:
Taige Wang,
Chen Wu,
Masataka Mogi,
Minoru Kawamura,
Yoshinori Tokura,
Zhi-Xun Shen,
Yi-Zhuang You,
Monica T. Allen
Abstract:
Microwave impedance microscopy (MIM) has been utilized to directly visualize topological edge states in many quantum materials, from quantum Hall systems to topological insulators, across the GHz regime. While the microwave response for conventional metals and insulators can be accurately quantified using simple lumped-element circuits, the applicability of these classical models to more exotic qu…
▽ More
Microwave impedance microscopy (MIM) has been utilized to directly visualize topological edge states in many quantum materials, from quantum Hall systems to topological insulators, across the GHz regime. While the microwave response for conventional metals and insulators can be accurately quantified using simple lumped-element circuits, the applicability of these classical models to more exotic quantum systems remains limited. In this work, we present a general theoretical framework of the MIM response of arbitrary quantum materials within linear response theory. As a special case, we model the microwave response of topological edge states in a Chern insulator and predict an enhanced MIM response at the crystal boundaries due to collective edge magnetoplasmon (EMP) excitations. The resonance frequency of these plasmonic modes should depend quantitatively on the topological invariant of the Chern insulator state and on the sample's circumference, which highlights their non-local, topological nature. To benchmark our analytical predictions, we experimentally probe the MIM response of quantum anomalous Hall edge states in a Cr-doped (Bi,Sb)2Te3 topological insulator and perform numerical simulations using a classical formulation of the EMP modes based on this realistic tip-sample geometry, both of which yield results consistent with our theoretical picture. We also show how the technique of MIM can be used to quantitatively extract the topological invariant of a Chern insulator, disentangle the signatures of topological versus trivial edge states, and shed light on the microscopic nature of dissipation along the crystal boundaries.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Graphene-Quantum Dot Hybrid Photodetectors from 200 mm Wafer Scale Processing
Authors:
Sha Li,
Zhenxing Wang,
Bianca Robertz,
Daniel Neumaier,
Oihana Txoperena,
Arantxa Maestre,
Amaia Zurutuza,
Chris Bower,
Ashley Rushton,
Yinglin Liu,
Chris Harris,
Alexander Bessonov,
Surama Malik,
Mark Allen,
Ivonne Medina-Salazar,
Tapani Ryhänen,
Max C. Lemme
Abstract:
A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at…
▽ More
A 200 mm processing platform for the large-scale production of graphene field-effect transistor-quantum dot (GFET-QD) hybrid photodetectors is demonstrated. Comprehensive statistical analysis of electric data shows a high yield (96%) and low variation of the 200 mm scale fabrication. The GFET-QD devices deliver responsivities of 10${^5}$ - 10${^6}$ V/W in a wavelength range from 400 to 1800 nm, at up to 100 frames per second. Spectral sensitivity compares well to that obtained using similar GFET-QD photodetectors. The device concept enables gate-tunable suppression or enhancement of the photovoltage, which may be exploited for electric shutter operation by toggling between the signal capture and shutter states. The devices show good stability at a wide operation range and external quantum efficiency of 20% in the short-wavelength infrared range. Furthermore, an integration solution with complementary metal-oxide-semiconductor technology is presented to realize image-sensor-array chips and a proof-of-concept image system. This work demonstrates the potential for the volume manufacture of infrared photodetectors for a wide range of imaging applications.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Influence of local symmetry on lattice dynamics coupled to topological surface states
Authors:
Jonathan A. Sobota,
Samuel W. Teitelbaum,
Yijing Huang,
José D. Querales-Flores,
Robert Power,
Meabh Allen,
Costel R. Rotundu,
Trevor P. Bailey,
Ctirad Uher,
Tom Henighan,
Mason Jiang,
Diling Zhu,
Matthieu Chollet,
Takahiro Sato,
Mariano Trigo,
Éamonn D. Murray,
Ivana Savić,
Patrick S. Kirchmann,
Stephen Fahy,
David. A. Reis,
Zhi-Xun Shen
Abstract:
We investigate coupled electron-lattice dynamics in the topological insulator Bi2Te3 with time-resolved photoemission and time-resolved x-ray diffraction. It is well established that coherent phonons can be launched by optical excitation, but selection rules generally restrict these modes to zone-center wavevectors and Raman-active branches. We find that the topological surface state couples to ad…
▽ More
We investigate coupled electron-lattice dynamics in the topological insulator Bi2Te3 with time-resolved photoemission and time-resolved x-ray diffraction. It is well established that coherent phonons can be launched by optical excitation, but selection rules generally restrict these modes to zone-center wavevectors and Raman-active branches. We find that the topological surface state couples to additional modes, including a continuum of surface-projected bulk modes from both Raman- and infrared-branches, with possible contributions from surface-localized modes when they exist. Our calculations show that this surface vibrational spectrum occurs naturally as a consequence of the translational and inversion symmetries broken at the surface, without requiring the splitting-off of surface-localized phonon modes. The generality of this result suggests that coherent phonon spectra are useful by providing unique fingerprints for identifying surface states in more controversial materials. These effects may also expand the phase space for tailoring surface state wavefunctions via ultrafast optical excitation.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Photonic Dirac Waveguides
Authors:
Svetlana Kiriushechkina,
Anton Vakulenko,
Daria Smirnova,
Sriram Guddala,
Filipp Komissarenko,
Monica Allen,
Jeffery Allen,
Alexander B. Khanikaev
Abstract:
The Dirac equation is a paradigmatic model that describes a range of intriguing properties of relativistic spin-1/2 particles, from the existence of antiparticles to Klein tunneling. However, the Dirac-like equations have found application far beyond its original scope, and has been used to comprehend the properties of graphene and topological phases of matter. In the field of photonics, the oppor…
▽ More
The Dirac equation is a paradigmatic model that describes a range of intriguing properties of relativistic spin-1/2 particles, from the existence of antiparticles to Klein tunneling. However, the Dirac-like equations have found application far beyond its original scope, and has been used to comprehend the properties of graphene and topological phases of matter. In the field of photonics, the opportunity to emulate Dirac physics has also enabled topological photonic insulators. In this paper, we demonstrate that judiciously engineered synthetic potentials in photonic Dirac systems can offer physical properties beyond both the elementary and quasi-particles, and topological realms. Specifically, we introduce a new class of optical Dirac waveguides, whose guided electromagnetic modes are endowed with pseudo-spin degree of freedom. Pseudo-spin coupled with the ability to engineer synthetic gauge potentials acting on it, enables control over the guided modes which is unattainable in conventional optical waveguides. In particular, we use a silicon nanophotonic metasurface that supports pseudo-spin degree of freedom as a testing platform to predict and experimentally confirm a spin-full nature of the Dirac waveguides. We also demonstrate that, for suitable trapping potentials, the guided modes exhibit spin-dependent field distributions, which gives rise to their distinct transport and radiative properties. Thereby, the Dirac waveguides manifest spin-dependent radiative lifetimes - the non-Hermitian spin-Hall effect - and open new avenues for spin-multiplexing, controlling characteristics of guided optical modes, and tuning light-matter interactions with photonic pseudo-spins.
△ Less
Submitted 1 November, 2022;
originally announced November 2022.
-
Invertible Optical Nonlinearity in Epsilon-near-zero Materials
Authors:
Chentao Li,
Xinyu Tian,
Guoce Yang,
Sukrith U. Dev,
Monica S. Allen,
Jeffery W. Allen,
Hayk Harutyunyan
Abstract:
Epsilon-near-zero (ENZ) materials such as indium tin oxide (ITO), have recently emerged as a new platform to enhance optical nonlinearities. Here we report a theoretical and experimental study on the origin of nonlinearities in ITO thin films that are dominated by two mechanisms based on intraband and interband transitions. We show that there are two competing factors that jointly contribute to a…
▽ More
Epsilon-near-zero (ENZ) materials such as indium tin oxide (ITO), have recently emerged as a new platform to enhance optical nonlinearities. Here we report a theoretical and experimental study on the origin of nonlinearities in ITO thin films that are dominated by two mechanisms based on intraband and interband transitions. We show that there are two competing factors that jointly contribute to a spectrally-invertible nonlinearity of ITO near its ENZ region i.e. the non-parabolicity of the band structure that results in a larger effective mass in the intraband transition and the Fermi energy shift, which determines the free carrier density. Our work reveals the relationship between the large nonlinearity and the intrinsic material properties of the ITO films.
△ Less
Submitted 17 March, 2022;
originally announced March 2022.
-
Dynamics and Interactions of Quincke Roller Clusters: from Orbits and Flips to Excited States
Authors:
Abraham Mauleon-Amieva,
Michael P. Allen,
C. Patrick Royall
Abstract:
Active matter systems may be characterised by the conversion of energy into active motion, e.g. the self-propulsion of microorganisms. Artificial active colloids form models which exhibit essential properties of more complex biological systems but are amenable to laboratory experiments. While most experimental models consist of spheres, such as Janus particles, active particles of different shapes…
▽ More
Active matter systems may be characterised by the conversion of energy into active motion, e.g. the self-propulsion of microorganisms. Artificial active colloids form models which exhibit essential properties of more complex biological systems but are amenable to laboratory experiments. While most experimental models consist of spheres, such as Janus particles, active particles of different shapes are less understood. In particular, interactions between such active colloidal "molecules" are largely unexplored. Here, we investigate the motion of active colloidal molecules and the interactions between them. We focus on self-assembled dumbbells and trimers powered by an external electric field. For dumbbells, we observe an activity-dependent behaviour of spinning, circular and orbital motion. Moreover, collisions between dumbbells lead to the hierarchical self-assembly of tetramers and hexamers, both of which form rotational excited states. On the other hand, trimers exhibit a novel type of flipping motion that leads to trajectories reminiscent of a honeycomb lattice.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Entropy production in an elementary, light driven micro-machine
Authors:
Stuart J. Box,
Michael P. Allen,
David B. Phillips,
Stephen H. Simpson
Abstract:
We consider the basic, thermodynamic properties of an elementary micro-machine operating at colloidal length scales. In particular, we track and analyse the driven stochastic motion of a carefully designed micro-propeller rotating unevenly in an optical tweezers, in water. In this intermediate regime, the second law of macroscopic thermodynamics is satisfied only as an ensemble average, and indivi…
▽ More
We consider the basic, thermodynamic properties of an elementary micro-machine operating at colloidal length scales. In particular, we track and analyse the driven stochastic motion of a carefully designed micro-propeller rotating unevenly in an optical tweezers, in water. In this intermediate regime, the second law of macroscopic thermodynamics is satisfied only as an ensemble average, and individual trajectories can be temporarily associated with decreases in entropy. We show that our light driven micro-propeller satisfies an appropriate fluctuation theorem that constrains the probability with which these apparent violations of the second law occur. Implications for the development of more complex micro-machines are discussed.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Impact of the surface phase transition on magnon and phonon excitations in BiFeO3 nanoparticles
Authors:
Ian Aupiais,
Pierre Hemme,
Marc Allen,
Alexis Scida,
Xiao Lu,
Christian Ricolleau,
Yann Gallais,
Alain Sacuto,
Stanislaus Wong,
Rogério de Sousa,
Maximilien Cazayous
Abstract:
We have performed Raman scattering measurements on BiFeO3 nanoparticles and studied both magnetic and lattice modes. We reveal strong anomalies between 140 K and 200 K in the frequency of magnon and E(LO1), E(TO1) and A1(LO1) phonon modes. These anomalies are related to a surface expansion and are enhanced for nanoparticle sizes approaching the spin cycloidal length. These observations point out t…
▽ More
We have performed Raman scattering measurements on BiFeO3 nanoparticles and studied both magnetic and lattice modes. We reveal strong anomalies between 140 K and 200 K in the frequency of magnon and E(LO1), E(TO1) and A1(LO1) phonon modes. These anomalies are related to a surface expansion and are enhanced for nanoparticle sizes approaching the spin cycloidal length. These observations point out the strong interplay between the surface, the lattice, and the magnetism for sizes of BiFeO3 nanoparticles close to the cycloid periodicity.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
Size-dependent bistability in multiferroic nanoparticles
Authors:
Marc Allen,
Ian Aupiais,
Maximilien Cazayous,
Rogério de Sousa
Abstract:
Most multiferroic materials with coexisting ferroelectric and magnetic order exhibit cycloidal antiferromagnetism with wavelength of several nanometers. The prototypical example is bismuth ferrite (BiFeO$_3$ or BFO), a room-temperature multiferroic considered for a number of technological applications. While most applications require small sizes such as nanoparticles, little is known about the sta…
▽ More
Most multiferroic materials with coexisting ferroelectric and magnetic order exhibit cycloidal antiferromagnetism with wavelength of several nanometers. The prototypical example is bismuth ferrite (BiFeO$_3$ or BFO), a room-temperature multiferroic considered for a number of technological applications. While most applications require small sizes such as nanoparticles, little is known about the state of these materials when their sizes are comparable to the cycloid wavelength. This work describes a microscopic theory of cycloidal magnetism in nanoparticles based on Hamiltonian calculations. It is demonstrated that magnetic anisotropy close to the surface has a huge impact on the multiferroic ground state. For certain nanoparticle sizes the modulus of the ferromagnetic and ferroelectric moments are bistable, an effect that may be used in the design of ideal memory bits that can be switched electrically and read out magnetically.
△ Less
Submitted 10 July, 2019; v1 submitted 19 December, 2018;
originally announced December 2018.
-
Molecular simulations of entangled defect structures around nanoparticles in nematic liquid crystals
Authors:
Anja Humpert,
Samuel F. Brown,
Michael P. Allen
Abstract:
We investigate the defect structures forming around two nanoparticles in a Gay-Berne nematic liquid crystal using molecular simulations. For small separations, disclinations entangle both particles forming the figure of eight, the figure of omega and the figure of theta. These defect structures are similar in shape and occur with a comparable frequency to micron-sized particles studied in experime…
▽ More
We investigate the defect structures forming around two nanoparticles in a Gay-Berne nematic liquid crystal using molecular simulations. For small separations, disclinations entangle both particles forming the figure of eight, the figure of omega and the figure of theta. These defect structures are similar in shape and occur with a comparable frequency to micron-sized particles studied in experiments. The simulations reveal fast transitions from one defect structure to another suggesting that particles of nanometre size cannot be bound together effectively. We identify the 'three-ring' structure observed in previous molecular simulations as a superposition of the different entangled and non-entangled states over time and conclude that it is not itself a stable defect structure.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.
-
Folding kinetics of a polymer [corrigendum]
Authors:
Bart Vorselaars,
Štěpán Růžička,
David Quigley,
Michael P. Allen
Abstract:
In our original article (Phys. Chem. Chem. Phys., 2012, 14, 60446053) a convergence problem resulted in an averaging error in computing the entropy from a set of Wang-Landau Monte-Carlo simulations. Here we report corrected results for the freezing temperature of the homopolymer chain as a function of the range of the non-bonded interaction. We find that the previously reported forward-flux sampli…
▽ More
In our original article (Phys. Chem. Chem. Phys., 2012, 14, 60446053) a convergence problem resulted in an averaging error in computing the entropy from a set of Wang-Landau Monte-Carlo simulations. Here we report corrected results for the freezing temperature of the homopolymer chain as a function of the range of the non-bonded interaction. We find that the previously reported forward-flux sampling (FFS) and brute-force (BF) simulation results are in agreement with the revised Wang-Landau (WL) calculations. This confirms the utility of FFS for computing crystallisation rates in systems of this kind.
△ Less
Submitted 20 October, 2016;
originally announced November 2016.
-
Visualization of phase-coherent electron interference in a ballistic graphene Josephson junction
Authors:
M. T. Allen,
O. Shtanko,
I. C. Fulga,
J. I. -J. Wang,
D. Nurgaliev,
K. Watanabe,
T. Taniguchi,
A. R. Akhmerov,
P. Jarillo-Herrero,
L. S. Levitov,
A. Yacoby
Abstract:
Interference of standing waves in electromagnetic resonators forms the basis of many technologies, from telecommunications and spectroscopy to detection of gravitational waves. However, unlike the confinement of light waves in vacuum, the interference of electronic waves in solids is complicated by boundary properties of the crystal, notably leading to electron guiding by atomic-scale potentials a…
▽ More
Interference of standing waves in electromagnetic resonators forms the basis of many technologies, from telecommunications and spectroscopy to detection of gravitational waves. However, unlike the confinement of light waves in vacuum, the interference of electronic waves in solids is complicated by boundary properties of the crystal, notably leading to electron guiding by atomic-scale potentials at the edges. Understanding the microscopic role of boundaries on coherent wave interference is an unresolved question due to the challenge of detecting charge flow with submicron resolution. Here we employ Fraunhofer interferometry to achieve real-space imaging of cavity modes in a graphene Fabry-Perot resonator, embedded between two superconductors to form a Josephson junction. By directly visualizing current flow using Fourier methods, our measurements reveal surprising redistribution of current on and off resonance. These findings provide direct evidence of separate interference conditions for edge and bulk currents and reveal the ballistic nature of guided edge states. Beyond equilibrium, our measurements show strong modulation of the multiple Andreev reflection amplitude on an off resonance, a direct measure of the gate-tunable change of cavity transparency. These results demonstrate that, contrary to the common belief, electron interactions with realistic disordered edges facilitate electron wave interference and ballistic transport.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Spatially resolved edge currents and guided-wave electronic states in graphene
Authors:
Monica T. Allen,
Oles Shtanko,
Ion Cosma Fulga,
Anton Akhmerov,
Kenji Watanabi,
Takashi Taniguchi,
Pablo Jarillo-Herrero,
Leonid S. Levitov,
Amir Yacoby
Abstract:
A far-reaching goal of graphene research is exploiting the unique properties of carriers to realize extreme nonclassical electronic transport. Of particular interest is harnessing wavelike carriers to guide and direct them on submicron scales, similar to light in optical fibers. Such modes, while long anticipated, have never been demonstrated experimentally. In order to explore this behavior, we e…
▽ More
A far-reaching goal of graphene research is exploiting the unique properties of carriers to realize extreme nonclassical electronic transport. Of particular interest is harnessing wavelike carriers to guide and direct them on submicron scales, similar to light in optical fibers. Such modes, while long anticipated, have never been demonstrated experimentally. In order to explore this behavior, we employ superconducting interferometry in a graphene Josephson junction to reconstruct the real-space supercurrent density using Fourier methods. Our measurements reveal charge flow guided along crystal boundaries close to charge neutrality. We interpret the observed edge currents in terms of guided-wave states, confined to the edge by band bending and transmitted as plane waves. As a direct analog of refraction-based confinement of light in optical fibers, such nonclassical states afford new means for information transduction and processing at the nanoscale.
△ Less
Submitted 28 April, 2015;
originally announced April 2015.
-
Theoretical study of strain-dependent optical absorption in Stranski-Krastanov grown InAs/InGaAs/GaAs/AlGaAs quantum dots
Authors:
Tarek Ameen,
Hesameddin Ilatikhameneh,
Yuling Hsueh,
James Charles,
Jim Fonseca,
Michael Povolotskyi,
Jun Oh Kim,
Sanjay Krishna,
Monica S. Allen,
Jeffery W. Allen,
Brett R. Wenner,
Rajib Rahman,
Gerhard Klimeck
Abstract:
A detailed theoretical study of the optical absorption in self-assembled quantum dots is presented in this paper. A rigorous atomistic strain model as well as a sophisticated electronic band structure model are used to ensure accurate prediction of the optical transitions in these devices . The optimized models presented in this paper are able to reproduce the experimental results with an error le…
▽ More
A detailed theoretical study of the optical absorption in self-assembled quantum dots is presented in this paper. A rigorous atomistic strain model as well as a sophisticated electronic band structure model are used to ensure accurate prediction of the optical transitions in these devices . The optimized models presented in this paper are able to reproduce the experimental results with an error less than 1$\%$. The effects of incident light polarization, alloy mole fraction, quantum dot dimensions, and doping have been investigated. The in-plane polarized light absorption is more significant than the perpendicularly polarized light absorption. Increasing the mole fraction of the strain controlling layer leads to a lower energy gap and larger absorption wavelength. Surprisingly, the absorption wavelength is highly sensitive to changes in the dot diameter, but almost insensitive to changes in the dot height. This unpredicted behavior is explained by sensitivity analysis of different factors which affect the optical transition energy.
△ Less
Submitted 26 February, 2015;
originally announced February 2015.
-
Gyromagnetically Induced Transparency of Meta-Surfaces
Authors:
S. Hossein Mousavi,
Alexander B. Khanikaev,
Jeffery Allen,
Monica Allen,
Gennady Shvets
Abstract:
We demonstrate that the violation of the time-reversal (TR) symmetry in the presence of a gyromagnetic substrate can produce an analog of electromagnetically induced transparency in metallic meta-molecules. The simplest implementation of such gyromagnetically induced transparency (GIT) in a meta-surface comprised of an array of resonant antenna pairs placed on a gyromagnetic substrate and illumina…
▽ More
We demonstrate that the violation of the time-reversal (TR) symmetry in the presence of a gyromagnetic substrate can produce an analog of electromagnetically induced transparency in metallic meta-molecules. The simplest implementation of such gyromagnetically induced transparency (GIT) in a meta-surface comprised of an array of resonant antenna pairs placed on a gyromagnetic substrate and illuminated by a normally incident electromagnetic wave is analyzed. TR symmetry breaking introduced by the magnetic field makes meta-molecules bi-anisotropic and causes spectrally-sharp Fano interference between the otherwise uncoupled electric and magnetic dipolar resonances of the meta-molecules. The applied magnetic field results in a sharp transmission peak through the otherwise reflective meta-surface. We show that, for oblique wave incidence, one-way GIT can be achieved by the combination of spatial dispersion and TR symmetry breaking. These theoretically predicted phenomena pave the way to non-reciprocal switches and isolators that can be dynamically controlled by electric currents.
△ Less
Submitted 31 May, 2014; v1 submitted 15 November, 2013;
originally announced November 2013.
-
Theory of spin-orbit enhanced electric-field control of magnetism in multiferroic BiFeO3
Authors:
Rogerio de Sousa,
Marc Allen,
Maximilien Cazayous
Abstract:
We present a microscopic theory that shows the importance of spin-orbit coupling in perovskite compounds with heavy ions. In BiFeO3 (BFO) the spin-orbit coupling at the bismuth ion sites results in a special kind of magnetic anisotropy that is linear in the applied E-field. This interaction can convert the cycloid ground state into a homogeneous antiferromagnet, with a weak ferromagnetic moment wh…
▽ More
We present a microscopic theory that shows the importance of spin-orbit coupling in perovskite compounds with heavy ions. In BiFeO3 (BFO) the spin-orbit coupling at the bismuth ion sites results in a special kind of magnetic anisotropy that is linear in the applied E-field. This interaction can convert the cycloid ground state into a homogeneous antiferromagnet, with a weak ferromagnetic moment whose orientation can be controlled by the E-field direction. Remarkably, the E-field control of magnetism occurs without poling the ferroelectric moment, providing a pathway for reduced energy dissipation in spin-based devices made of insulators.
△ Less
Submitted 28 June, 2013; v1 submitted 28 September, 2012;
originally announced September 2012.
-
Gate Defined Quantum Confinement in Suspended Bilayer Graphene
Authors:
Monica T. Allen,
Jens Martin,
Amir Yacoby
Abstract:
Quantum confined devices that manipulate single electrons in graphene are emerging as attractive candidates for nanoelectronics applications. Previous experiments have employed etched graphene nanostructures, but edge and substrate disorder severely limit device functionality. Here we present a technique that builds quantum confined structures in suspended bilayer graphene with tunnel barriers def…
▽ More
Quantum confined devices that manipulate single electrons in graphene are emerging as attractive candidates for nanoelectronics applications. Previous experiments have employed etched graphene nanostructures, but edge and substrate disorder severely limit device functionality. Here we present a technique that builds quantum confined structures in suspended bilayer graphene with tunnel barriers defined by external electric fields that break layer inversion symmetry, thereby eliminating both edge and substrate disorder. We report clean quantum dot formation in two regimes: at zero magnetic field B using the single particle energy gap induced by a perpendicular electric field and at B > 0 using the quantum Hall ferromagnet ν = 0 gap for confinement. Coulomb blockade oscillations exhibit periodicity consistent with electrostatic simulations based on local top gate geometry, a direct demonstration of local control over the band structure of graphene. This technology integrates single electron transport with high device quality and access to vibrational modes, enabling broad applications from electromechanical sensors to quantum bits.
△ Less
Submitted 3 February, 2012;
originally announced February 2012.
-
Folding Kinetics of a Polymer
Authors:
S. Ruzicka,
D. Quigley,
M. P. Allen
Abstract:
By simulating the first order globule-crystal transition of a flexible homopolymer chain, both by collision dynamics and Monte Carlo with non-kinetic moves, we show that the effective and the thermodynamic transition temperatures are different and we propose a way of quantifying the kinetic hindering. We then also observe that the top eigenvalue in the spectrum of the dynamical (contact or adjacen…
▽ More
By simulating the first order globule-crystal transition of a flexible homopolymer chain, both by collision dynamics and Monte Carlo with non-kinetic moves, we show that the effective and the thermodynamic transition temperatures are different and we propose a way of quantifying the kinetic hindering. We then also observe that the top eigenvalue in the spectrum of the dynamical (contact or adjacency) matrix provides insight into the ensembles of folding and unfolding trajectories, and may be a suitable additional reaction coordinate for the folding transition of chain molecules.
△ Less
Submitted 29 September, 2011;
originally announced September 2011.
-
Presence of a (1x1) oxygen overlayer on bare ZnO(0001) surfaces and at Schottky interfaces
Authors:
Christian M. Schlepütz,
Yongsoo Yang,
Naji S. Husseini,
Robert Heinhold,
Hyung-Suk Kim,
Martin W. Allen,
Steven M. Durbin,
Roy Clarke
Abstract:
The atomic surface and interface structure of bare and metal-coated ZnO(0001) Zn-polar wafers were investigated via surface x-ray diffraction. All bare samples showed the presence of a (1x1) overlayer of oxygen atoms located at the on-top position above the terminating Zn atom, a structure predicted to be unstable by several density functional theory calculations. The same oxygen overlayer is clea…
▽ More
The atomic surface and interface structure of bare and metal-coated ZnO(0001) Zn-polar wafers were investigated via surface x-ray diffraction. All bare samples showed the presence of a (1x1) overlayer of oxygen atoms located at the on-top position above the terminating Zn atom, a structure predicted to be unstable by several density functional theory calculations. The same oxygen overlayer is clearly seen at the interface of ZnO with both elemental and oxidized metal contact layers. No significant atomic relaxations are observed at surfaces and interfaces processed under typical device fabrication conditions.
△ Less
Submitted 27 July, 2011;
originally announced July 2011.
-
Coulomb-driven broken-symmetry states in doubly gated suspended bilayer graphene
Authors:
R. Thomas Weitz,
Monica T. Allen,
Benjamin E. Feldman,
Jens Martin,
Amir Yacoby
Abstract:
The non-interacting energy spectrum of graphene and its bilayer counterpart consists of multiple degeneracies owing to the inherent spin, valley and layer symmetries. Interactions among charge carriers are expected to spontaneously break these symmetries, leading to gapped ordered states. In the quantum Hall regime these states are predicted to be ferromagnetic in nature whereby the system becomes…
▽ More
The non-interacting energy spectrum of graphene and its bilayer counterpart consists of multiple degeneracies owing to the inherent spin, valley and layer symmetries. Interactions among charge carriers are expected to spontaneously break these symmetries, leading to gapped ordered states. In the quantum Hall regime these states are predicted to be ferromagnetic in nature whereby the system becomes spin polarized, layer polarized or both. In bilayer graphene, due to its parabolic dispersion, interaction-induced symmetry breaking is already expected at zero magnetic field. In this work, the underlying order of the various broken-symmetry states is investigated in bilayer graphene that is suspended between top and bottom gate electrodes. By controllably breaking the spin and sublattice symmetries we are able to deduce the order parameter of the various quantum Hall ferromagnetic states. At small carrier densities, we identify for the first time three distinct broken symmetry states, one of which is consistent with either spontaneously broken time-reversal symmetry or spontaneously broken rotational symmetry.
△ Less
Submitted 5 October, 2010;
originally announced October 2010.
-
Local Compressibility Measurements of Correlated States in Suspended Bilayer Graphene
Authors:
Jens Martin,
Benjamin E. Feldman,
R. Thomas Weitz,
Monica T. Allen,
Amir Yacoby
Abstract:
Bilayer graphene has attracted considerable interest due to the important role played by many-body effects, particularly at low energies. Here we report local compressibility measurements of a suspended graphene bilayer. We find that the energy gaps at filling factors v = 4 do not vanish at low fields, but instead merge into an incompressible region near the charge neutrality point at zero electri…
▽ More
Bilayer graphene has attracted considerable interest due to the important role played by many-body effects, particularly at low energies. Here we report local compressibility measurements of a suspended graphene bilayer. We find that the energy gaps at filling factors v = 4 do not vanish at low fields, but instead merge into an incompressible region near the charge neutrality point at zero electric and magnetic field. These results indicate the existence of a zero-field ordered state and are consistent with the formation of either an anomalous quantum Hall state or a nematic phase with broken rotational symmetry. At higher fields, we measure the intrinsic energy gaps of broken-symmetry states at v = 0, 1 and 2, and find that they scale linearly with magnetic field, yet another manifestation of the strong Coulomb interactions in bilayer graphene.
△ Less
Submitted 10 September, 2010;
originally announced September 2010.
-
Expressions for forces and torques in molecular simulations using rigid bodies
Authors:
Michael P. Allen,
Guido Germano
Abstract:
Expressions for intermolecular forces and torques, derived from pair potentials between rigid non-spherical units, are presented. The aim is to give compact and clear expressions, which are easily generalised, and which minimise the risk of error in writing molecular dynamics simulation programs. It is anticipated that these expressions will be useful in the simulation of liquid crystalline syst…
▽ More
Expressions for intermolecular forces and torques, derived from pair potentials between rigid non-spherical units, are presented. The aim is to give compact and clear expressions, which are easily generalised, and which minimise the risk of error in writing molecular dynamics simulation programs. It is anticipated that these expressions will be useful in the simulation of liquid crystalline systems, and in coarse-grained modelling of macromolecules.
△ Less
Submitted 17 August, 2006;
originally announced August 2006.
-
A Thermostat for Molecular Dynamics of Complex Fluids
Authors:
Michael P. Allen,
Friederike Schmid
Abstract:
A thermostat of the Nose-Hoover type, based on relative velocities and a local definition of the temperature, is presented. The thermostat is momentum-conserving and Galilean-invariant, which should make it suitable for use in Dissipative Particle Dynamics simulations, as well as nonequilibrium molecular dynamics simulations.
A thermostat of the Nose-Hoover type, based on relative velocities and a local definition of the temperature, is presented. The thermostat is momentum-conserving and Galilean-invariant, which should make it suitable for use in Dissipative Particle Dynamics simulations, as well as nonequilibrium molecular dynamics simulations.
△ Less
Submitted 20 June, 2006;
originally announced June 2006.
-
Structure of a liquid crystalline fluid around a macroparticle: Density functional theory study
Authors:
David L. Cheung,
Michael P. Allen
Abstract:
The structure of a molecular liquid, in both the nematic liquid crystalline and isotropic phases, around a cylindrical macroparticle, is studied using density functional theory. In the nematic phase the structure of the fluid is highly anisotropic with respect to the director, in agreement with results from simulation and phenomenological theories. On going into the isotropic phase the structure…
▽ More
The structure of a molecular liquid, in both the nematic liquid crystalline and isotropic phases, around a cylindrical macroparticle, is studied using density functional theory. In the nematic phase the structure of the fluid is highly anisotropic with respect to the director, in agreement with results from simulation and phenomenological theories. On going into the isotropic phase the structure becomes rotationally invariant around the macroparticle with an oriented layer at the surface.
△ Less
Submitted 10 April, 2006;
originally announced April 2006.
-
Structure of molecular liquids: cavity and bridge functions of the hard spheroid fluid
Authors:
David L. Cheung,
Lucian Anton,
Michael P. Allen,
Andrew J. Masters
Abstract:
We present methodologies for calculating the direct correlation function, c(1,2), the cavity function, y(1,2), and the bridge function, b(1,2), for molecular liquids, from Monte Carlo simulations. As an example we present results for the isotropic hard spheroid fluid with elongation e=3. The simulation data are compared with the results from integral equation theory. In particular, we solve the…
▽ More
We present methodologies for calculating the direct correlation function, c(1,2), the cavity function, y(1,2), and the bridge function, b(1,2), for molecular liquids, from Monte Carlo simulations. As an example we present results for the isotropic hard spheroid fluid with elongation e=3. The simulation data are compared with the results from integral equation theory. In particular, we solve the Percus-Yevick and Hypernetted Chain equations. In addition, we calculate the first two terms in the virial expansion of the bridge function and incorporate this into the closure. At low densities, the bridge functions calculated by theory and from simulation are in good agreement, lending support to the correctness of our numerical procedures. At higher densities, the hypernetted chain results are brought into closer agreement with simulation by incorporating the approximate bridge function, but significant discrepancies remain.
△ Less
Submitted 27 March, 2006;
originally announced March 2006.
-
Evaluation of Pressure Tensor in Constant-Volume Simulations of Hard and Soft Convex Bodies
Authors:
Michael P. Allen
Abstract:
A method for calculating the pressure tensor in constant-volume Monte Carlo simulations of convex bodies is presented. In contrast to other approaches, the method requires only an isotropic scaling of the simulation box, and the counting of simple geometric quantities characterizing overlapping pairs. Non-sphericity presents no special difficulties. The result is expressed as a sum of pairwise c…
▽ More
A method for calculating the pressure tensor in constant-volume Monte Carlo simulations of convex bodies is presented. In contrast to other approaches, the method requires only an isotropic scaling of the simulation box, and the counting of simple geometric quantities characterizing overlapping pairs. Non-sphericity presents no special difficulties. The result is expressed as a sum of pairwise contributions, and can therefore be used to compute pressure tensor profiles in a conventional way.
△ Less
Submitted 1 March, 2006;
originally announced March 2006.
-
Configurational Temperature in Membrane Simulations Using Dissipative Particle Dynamics
Authors:
Michael P. Allen
Abstract:
The use of excessively long timesteps in dissipative particle dynamics simulations may produce simulation artifacts due to the generation of configurations which are not representative of the desired canonical ensemble. The configurational temperature, amongst other quantities, may be used to assess the extent of the deviation from equilibrium. This paper presents results for simulations of mode…
▽ More
The use of excessively long timesteps in dissipative particle dynamics simulations may produce simulation artifacts due to the generation of configurations which are not representative of the desired canonical ensemble. The configurational temperature, amongst other quantities, may be used to assess the extent of the deviation from equilibrium. This paper presents results for simulations of models of water, and lipid bilayer membranes, to illustrate the nature of the problems.
△ Less
Submitted 11 September, 2005;
originally announced September 2005.
-
Spin Dynamics for the Lebwohl-Lasher Model
Authors:
Michael P. Allen
Abstract:
A spin dynamics algorithm, combining checkerboard updating and a rotation algorithm based on the local second-rank ordering field, is developed for the Lebwohl-Lasher model of liquid crystals. The method is shown to conserve energy well and to generate simulation averages which are consistent with those obtained by Monte Carlo simulation. However, care must be taken to avoid the undesirable effe…
▽ More
A spin dynamics algorithm, combining checkerboard updating and a rotation algorithm based on the local second-rank ordering field, is developed for the Lebwohl-Lasher model of liquid crystals. The method is shown to conserve energy well and to generate simulation averages which are consistent with those obtained by Monte Carlo simulation. However, care must be taken to avoid the undesirable effects of director rotation, and a method for doing this is proposed.
△ Less
Submitted 11 September, 2005;
originally announced September 2005.
-
Forces between elongated particles in a nematic colloid
Authors:
D. Andrienko,
M. Tasinkevych,
P. Patricio,
M. P. Allen,
M. M. Telo da Gama
Abstract:
Using molecular dynamics (MD) simulations we study the interactions between elongated colloidal particles (length to breath ratio > 1) in a nematic host. The simulation results are compared to the results of a Landau-de Gennes elastic free energy. We find that depletion forces dominate for the sizes of the colloidal particles studied. The tangential component of the force, however, allows us to…
▽ More
Using molecular dynamics (MD) simulations we study the interactions between elongated colloidal particles (length to breath ratio > 1) in a nematic host. The simulation results are compared to the results of a Landau-de Gennes elastic free energy. We find that depletion forces dominate for the sizes of the colloidal particles studied. The tangential component of the force, however, allows us to resolve the elastic contribution to the total interaction. We find that this contribution differs from the quadrupolar interaction predicted at large separations. The difference is due to the presence of nonlinear effects, namely th e change in the positions and structure of the defects and their annihilation at small separations.
△ Less
Submitted 10 July, 2003;
originally announced July 2003.
-
Drag on particles in a nematic suspension by a moving nematic-isotropic interface
Authors:
J. L. West,
A. Glushchenko,
G. Liao,
Y. Reznikov,
D. Andrienko,
M. P. Allen
Abstract:
We report the first clear demonstration of drag on colloidal particles by a moving nematic-isotropic interface. The balance of forces explains our observation of periodic, strip-like structures that are produced by the movement of these particles.
We report the first clear demonstration of drag on colloidal particles by a moving nematic-isotropic interface. The balance of forces explains our observation of periodic, strip-like structures that are produced by the movement of these particles.
△ Less
Submitted 4 May, 2002;
originally announced May 2002.
-
Molecular simulation and theory of a liquid crystalline disclination core
Authors:
D. Andrienko,
M. P. Allen
Abstract:
Molecular simulations of a nematic liquid crystal confined in cylinder geometry with homeotropic anchoring have been carried out. The core structure of a disclination line defect of strength +1 has been examined, and comparison made with various theoretical treatments, which are presented in a unified way. It is found that excellent fits to the cylindrically-symmetrized order tensor profiles may…
▽ More
Molecular simulations of a nematic liquid crystal confined in cylinder geometry with homeotropic anchoring have been carried out. The core structure of a disclination line defect of strength +1 has been examined, and comparison made with various theoretical treatments, which are presented in a unified way. It is found that excellent fits to the cylindrically-symmetrized order tensor profiles may be obtained with appropriate parameter choices; notwithstanding this, on the timescales of the simulation, the cylindrical symmetry of the core is broken and two defects of strength +1/2 may be resolved.
△ Less
Submitted 5 March, 2002;
originally announced March 2002.
-
Computer simulation of topological defects around a colloidal particle or droplet dispersed in a nematic host
Authors:
D. Andrienko,
G. Germano,
M. P. Allen
Abstract:
We use molecular dynamics to study the ordering of a nematic liquid crystal around a spherical particle or droplet. Homeotropic boundary conditions and strong anchoring create a hedgehog director configuration on the particle surface and in its vicinity; this topological defect is cancelled by nearby defect structures in the surrounding liquid crystal, so as to give a uniform director field at l…
▽ More
We use molecular dynamics to study the ordering of a nematic liquid crystal around a spherical particle or droplet. Homeotropic boundary conditions and strong anchoring create a hedgehog director configuration on the particle surface and in its vicinity; this topological defect is cancelled by nearby defect structures in the surrounding liquid crystal, so as to give a uniform director field at large distances. We observe three defect structures for different particle sizes: a quadrupolar one with a ring defect surrounding the particle in the equatorial plane; a dipolar one with a satellite defect at the north or south pole; and a transitional, non-equatorial, ring defect. These observations are broadly consistent with the predictions of the simplest elastic theory. By studying density and order-parameter maps, we are able to examine behaviour near the particle surface, and in the disclination core region, where the elastic theory is inapplicable. Despite the relatively small scale of the inhomogeneities in our systems, the simple theory gives reasonably accurate predictions of the variation of defect position with particle size.
△ Less
Submitted 4 March, 2002;
originally announced March 2002.
-
Liquid crystal director fluctuations and surface anchoring by molecular simulation
Authors:
D. Andrienko,
G. Germano,
M. P. Allen
Abstract:
We propose a simple and reliable method to measure the liquid crystal surface anchoring strength by molecular simulation. The method is based on the measurement of the long-range fluctuation modes of the director in confined geometry. As an example, molecular simulations of a liquid crystal in slab geometry between parallel walls with homeotropic anchoring have been carried out using the Monte C…
▽ More
We propose a simple and reliable method to measure the liquid crystal surface anchoring strength by molecular simulation. The method is based on the measurement of the long-range fluctuation modes of the director in confined geometry. As an example, molecular simulations of a liquid crystal in slab geometry between parallel walls with homeotropic anchoring have been carried out using the Monte Carlo technique. By studying different slab thicknesses, we are able to calculate separately the position of the elastic boundary condition, and the extrapolation length.
△ Less
Submitted 3 March, 2002;
originally announced March 2002.
-
Defect structures and torque on an elongated colloidal particle immersed in a liquid crystal host
Authors:
D. Andrienko,
M. P. Allen,
G. Skacej,
S. Zumer
Abstract:
Combining molecular dynamics and Monte Carlo simulation we study defect structures around an elongated colloidal particle embedded in a nematic liquid crystal host. By studying nematic ordering near the particle and the disclination core region we are able to examine the defect core structure and the difference between two simulation techniques. In addition, we also study the torque on a particl…
▽ More
Combining molecular dynamics and Monte Carlo simulation we study defect structures around an elongated colloidal particle embedded in a nematic liquid crystal host. By studying nematic ordering near the particle and the disclination core region we are able to examine the defect core structure and the difference between two simulation techniques. In addition, we also study the torque on a particle tilted with respect to the director, and modification of this torque when the particle is close to the cell wall.
△ Less
Submitted 6 March, 2002; v1 submitted 1 March, 2002;
originally announced March 2002.
-
Theory and simulation of the nematic zenithal anchoring coefficient
Authors:
D. Andrienko,
M. P. Allen
Abstract:
Combining molecular simulation, Onsager theory and the elastic description of nematic liquid crystals, we study the dependence of the nematic liquid crystal elastic constants and the zenithal surface anchoring coefficient on the value of the bulk order parameter.
Combining molecular simulation, Onsager theory and the elastic description of nematic liquid crystals, we study the dependence of the nematic liquid crystal elastic constants and the zenithal surface anchoring coefficient on the value of the bulk order parameter.
△ Less
Submitted 4 April, 2002; v1 submitted 1 March, 2002;
originally announced March 2002.
-
Dynamical precursor of nematic order in a dense fluid of hard ellipsoids of revolution
Authors:
Th. Theenhaus,
M. Letz,
A. Latz,
R. Schilling,
M. P. Allen
Abstract:
We investigate hard ellipsoids of revolution in a parameter regime where no long range nematic order is present but already finite size domains are formed which show orientational order. Domain formation leads to a substantial slowing down of a collective rotational mode which separates well from the usual microscopic frequency regime. A dynamic coupling of this particular mode into all other mo…
▽ More
We investigate hard ellipsoids of revolution in a parameter regime where no long range nematic order is present but already finite size domains are formed which show orientational order. Domain formation leads to a substantial slowing down of a collective rotational mode which separates well from the usual microscopic frequency regime. A dynamic coupling of this particular mode into all other modes provides a general mechanism which explains an excess peak in spectra of molecular fluids. Using molecular dynamics simulation on up to 4096 particles and on solving the molecular mode coupling equation we investigate dynamic properties of the peak and prove its orientational origin.
△ Less
Submitted 18 September, 2001;
originally announced September 2001.
-
Molecular Dynamics Study of the Nematic-Isotropic Interface
Authors:
N. Akino,
F. Schmid,
M. P. Allen
Abstract:
We present large-scale molecular dynamics simulations of a nematic-isotropic interface in a system of repulsive ellipsoidal molecules, focusing in particular on the capillary wave fluctuations of the interfacial position. The interface anchors the nematic phase in a planar way, i.e., the director aligns parallel to the interface. Capillary waves in the direction parallel and perpendicular to the…
▽ More
We present large-scale molecular dynamics simulations of a nematic-isotropic interface in a system of repulsive ellipsoidal molecules, focusing in particular on the capillary wave fluctuations of the interfacial position. The interface anchors the nematic phase in a planar way, i.e., the director aligns parallel to the interface. Capillary waves in the direction parallel and perpendicular to the director are considered separately. We find that the spectrum is anisotropic, the amplitudes of capillary waves being larger in the direction perpendicular to the director. In the long wavelength limit, however, the spectrum becomes isotropic and compares well with the predictions of a simple capillary wave theory.
△ Less
Submitted 11 January, 2001;
originally announced January 2001.
-
Surface tension of the isotropic-nematic interface
Authors:
A. J. McDonald,
M. P. Allen,
F. Schmid
Abstract:
We present the first calculations of the pressure tensor profile in the vicinity of the planar interface between isotropic liquid and nematic liquid crystal, using Onsager's density functional theory and computer simulation. When the liquid crystal director is aligned parallel to the interface, the situation of lowest free energy, there is a large tension on the nematic side of the interface and…
▽ More
We present the first calculations of the pressure tensor profile in the vicinity of the planar interface between isotropic liquid and nematic liquid crystal, using Onsager's density functional theory and computer simulation. When the liquid crystal director is aligned parallel to the interface, the situation of lowest free energy, there is a large tension on the nematic side of the interface and a small compressive region on the isotropic side. By contrast, for perpendicular alignment, the tension is on the isotropic side. There is excellent agreement between theory and simulation both in the forms of the pressure tensor profiles, and the values of the surface tension.
△ Less
Submitted 11 January, 2001; v1 submitted 3 August, 2000;
originally announced August 2000.
