-
Spin-orbit-splitting-driven nonlinear Hall effect in NbIrTe4
Authors:
Ji-Eun Lee,
Aifeng Wang,
Shuzhang Chen,
Minseong Kwon,
Jinwoong Hwang,
Minhyun Cho,
Ki-Hoon Son,
Dong-Soo Han,
Jun Woo Choi,
Young Duck Kim,
Sung-Kwan Mo,
Cedomir Petrovic,
Choongyu Hwang,
Se Young Park,
Chaun Jang,
Hyejin Ryu
Abstract:
The Berry curvature dipole (BCD) serves as a one of the fundamental contributors to emergence of the nonlinear Hall effect (NLHE). Despite intense interest due to its potential for new technologies reaching beyond the quantum efficiency limit, the interplay between BCD and NLHE has been barely understood yet in the absence of a systematic study on the electronic band structure. Here, we report NLH…
▽ More
The Berry curvature dipole (BCD) serves as a one of the fundamental contributors to emergence of the nonlinear Hall effect (NLHE). Despite intense interest due to its potential for new technologies reaching beyond the quantum efficiency limit, the interplay between BCD and NLHE has been barely understood yet in the absence of a systematic study on the electronic band structure. Here, we report NLHE realized in NbIrTe4 that persists above room temperature coupled with a sign change in the Hall conductivity at 150 K. First-principles calculations combined with angle-resolved photoemission spectroscopy (ARPES) measurements show that BCD tuned by the partial occupancy of spin-orbit split bands via temperature is responsible for the temperature-dependent NLHE. Our findings highlight the correlation between BCD and the electronic band structure, providing a viable route to create and engineer the non-trivial Hall effect by tuning the geometric properties of quasiparticles in transition-metal chalcogen compounds.
△ Less
Submitted 21 August, 2024;
originally announced August 2024.
-
Modified Dirac fermions in the crystalline xenon and graphene Moiré heterostructure
Authors:
Hayoon Im,
Suji Im,
Kyoo Kim,
Ji-Eun Lee,
Jinwoong Hwang,
Sung-Kwan Mo,
Choongyu Hwang
Abstract:
The interface between two-dimensional (2D) crystals often forms a Moire superstructure that imposes a new periodicity, which is a key element in realizing complex electronic phases as evidenced in twisted bilayer graphene. A combined angle resolved photoemission spectroscopy measurements and first-principles calculations reveal the formation of a Moire superstructure between a 2D Dirac semi-metall…
▽ More
The interface between two-dimensional (2D) crystals often forms a Moire superstructure that imposes a new periodicity, which is a key element in realizing complex electronic phases as evidenced in twisted bilayer graphene. A combined angle resolved photoemission spectroscopy measurements and first-principles calculations reveal the formation of a Moire superstructure between a 2D Dirac semi-metallic crystal, graphene, and a 2D insulating crystal of noble gas, xenon. Incommensurate diffraction pattern and folded Dirac cones around the Brillouin zone center imply the formation of hexagonal crystalline array of xenon atoms. The velocity of Dirac fermions increases upon the formation of the 2D xenon crystal on top of graphene due to the enhanced dielectric screening by the xenon over-layer. These findings not only provide a novel method to produce a Moire superstructure from the adsorption of noble gas on 2D materials, but also to control the physical properties of graphene by the formation of a graphene-noble gas interface.
△ Less
Submitted 27 July, 2024;
originally announced July 2024.
-
Controlling structure and interfacial interaction of monolayer TaSe2 on bilayer graphene
Authors:
Hyobeom Lee,
Hayoon Im,
Byoung Ki Choi,
Kyoungree Park,
Yi Chen,
Wei Ruan,
Yong Zhong,
Ji-Eun Lee,
Hyejin Ryu,
Michael F. Crommie,
Zhi-Xun Shen,
Choongyu Hwang,
Sung-Kwan Mo,
Jinwoong Hwang
Abstract:
Tunability of interfacial effects between two-dimensional (2D) crystals is crucial not only for understanding the intrinsic properties of each system, but also for designing electronic devices based on ultra-thin heterostructures. A prerequisite of such heterostructure engineering is the availability of 2D crystals with different degrees of interfacial interactions. In this work, we report a contr…
▽ More
Tunability of interfacial effects between two-dimensional (2D) crystals is crucial not only for understanding the intrinsic properties of each system, but also for designing electronic devices based on ultra-thin heterostructures. A prerequisite of such heterostructure engineering is the availability of 2D crystals with different degrees of interfacial interactions. In this work, we report a controlled epitaxial growth of monolayer TaSe2 with different structural phases, 1H and 1T, on a bilayer graphene (BLG) substrate using molecular beam epitaxy, and its impact on the electronic properties of the heterostructures using angle-resolved photoemission spectroscopy. 1H-TaSe2 exhibits significant charge transfer and band hybridization at the interface, whereas 1T-TaSe2 shows weak interactions with the substrate. The distinct interfacial interactions are attributed to the dual effects from the differences of the work functions as well as the relative interlayer distance between TaSe2 films and BLG substrate. The method demonstrated here provides a viable route towards interface engineering in a variety of transition-metal dichalcogenides that can be applied to future nano-devices with designed electronic properties.
△ Less
Submitted 27 July, 2024;
originally announced July 2024.
-
Active Interface Characteristics of Heterogeneously Integrated GaAsSb/Si Photodiodes
Authors:
Manisha Muduli,
Yongkang Xia,
Seunghyun Lee,
Nathan Gajowski,
Chris Chae,
Siddharth Rajan,
Jinwoo Hwang,
Shamsul Arafin,
Sanjay Krishna
Abstract:
There is increased interest in the heterogeneous integration of various compound semiconductors with Si for a variety of electronic and photonic applications. This paper focuses on integrating GaAsSb (with absorption in the C-band at 1550nm) with silicon to fabricate photodiodes, leveraging epitaxial layer transfer (ELT) methods. Two ELT techniques, epitaxial lift-off (ELO) and macro-transfer prin…
▽ More
There is increased interest in the heterogeneous integration of various compound semiconductors with Si for a variety of electronic and photonic applications. This paper focuses on integrating GaAsSb (with absorption in the C-band at 1550nm) with silicon to fabricate photodiodes, leveraging epitaxial layer transfer (ELT) methods. Two ELT techniques, epitaxial lift-off (ELO) and macro-transfer printing (MTP), are compared for transferring GaAsSb films from InP substrates to Si, forming PIN diodes. Characterization through atomic force microscopy (AFM), and transmission electron microscopy (TEM) exhibits a high-quality, defect-free interface. Current-voltage (IV) measurements and capacitance-voltage (CV) analysis validate the quality and functionality of the heterostructures. Photocurrent measurements at room temperature and 200 K demonstrate the device's photo-response at 1550 nm, highlighting the presence of an active interface.
△ Less
Submitted 26 July, 2024; v1 submitted 24 July, 2024;
originally announced July 2024.
-
Long-lived magnetization in an atomic spin chain tuned to a diabolic point
Authors:
R. J. G. Elbertse,
D. Borodin,
J. Oh,
T. Ahn,
J. Hwang,
J. C. Rietveld,
A. J. Heinrich,
F. Delgado,
S. Otte,
Y. Bae
Abstract:
Scaling magnets down to where quantum size effects become prominent triggers quantum tunneling of magnetization (QTM), profoundly influencing magnetization dynamics. Measuring magnetization switching in an Fe atomic chain under a carefully tuned transverse magnetic field, we observe a non-monotonic variation of magnetization lifetimes around a level crossing, known as the diabolic point (DP). Near…
▽ More
Scaling magnets down to where quantum size effects become prominent triggers quantum tunneling of magnetization (QTM), profoundly influencing magnetization dynamics. Measuring magnetization switching in an Fe atomic chain under a carefully tuned transverse magnetic field, we observe a non-monotonic variation of magnetization lifetimes around a level crossing, known as the diabolic point (DP). Near DPs, local environment effects causing QTM are efficiently suppressed, enhancing lifetimes by three orders of magnitude. Adjusting interatomic interactions further facilitates multiple DPs. Our study provides a deeper understanding of quantum dynamics near DPs and enhances our ability to engineer a quantum magnet.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Structural and Electrical Properties of Grafted Si/GaAsSb Heterojunction
Authors:
Haris Naeem Abbasi,
Seunghyun Lee,
Hyemin Jung,
Nathan Gajowski,
Yi Lu,
Linus Wang,
Donghyeok Kim,
Jie Zhou,
Jiarui Gong,
Chris Chae,
Jinwoo Hwang,
Manisha Muduli,
Subramanya Nookala,
Zhenqiang Ma,
Sanjay Krishna
Abstract:
The short-wave infrared (SWIR) wavelength, especially 1.55 um, has attracted significant attention in various areas such as high-speed optical communication and LiDAR systems. Avalanche photodiodes (APDs) are a critical component as a receiver in these systems due to their internal gain which enhances the system performance. Silicon-based APDs are promising since they are CMOS compatible, but they…
▽ More
The short-wave infrared (SWIR) wavelength, especially 1.55 um, has attracted significant attention in various areas such as high-speed optical communication and LiDAR systems. Avalanche photodiodes (APDs) are a critical component as a receiver in these systems due to their internal gain which enhances the system performance. Silicon-based APDs are promising since they are CMOS compatible, but they are limited in detecting 1.55 um light detection. This study proposes a p-type Si on n-type GaAs0.51Sb0.49 (GaAsSb) lattice matched to InP substrates heterojunction formed using a grafting technique for future GaAsSb/Si APD technology. A p+Si nanomembrane is transferred onto the GaAsSb/AlInAs/InP substrate, with an ultrathin ALD-Al2O3 oxide at the interface, which behaves as both double-side passivation and quantum tunneling layers. The devices exhibit excellent surface morphology and interface quality, confirmed by atomic force microscope (AFM) and transmission electron microscope (TEM). Also, the current-voltage (I-V) of the p+Si/n-GaAsSb heterojunction shows ideal rectifying characteristics with an ideality factor of 1.15. The I-V tests across multiple devices confirm high consistency and yield. Furthermore, the X-ray photoelectron spectroscopy (XPS) measurement reveals that GaAsSb and Si are found to have type-II band alignment with a conduction band offset of 50 meV which is favorable for the high-bandwidth APD application. The demonstration of the GaAsSb/Si heterojunction highlights the potential to advance current SWIR PD technologies.
△ Less
Submitted 24 June, 2024; v1 submitted 20 June, 2024;
originally announced June 2024.
-
Frustrated phonon with charge density wave in vanadium Kagome metal
Authors:
Seung-Phil Heo,
Choongjae Won,
Heemin Lee,
Hanbyul Kim,
Eunyoung Park,
Sung Yun Lee,
Junha Hwang,
Hyeongi Choi,
Sang-Youn Park,
Byungjune Lee,
Woo-Suk Noh,
Hoyoung Jang,
Jae-Hoon Park,
Dongbin Shin,
Changyong Song
Abstract:
Crystals with unique ionic arrangements and strong electronic correlations serve as a fertile ground for the emergence of exotic phases, as evidenced by the coexistence of charge density wave (CDW) and superconductivity in vanadium Kagome metals, specifically AV3Sb5 (where A represents K, Rb, or Cs). The formation of a star of David CDW superstructure, resulting from the coordinated displacements…
▽ More
Crystals with unique ionic arrangements and strong electronic correlations serve as a fertile ground for the emergence of exotic phases, as evidenced by the coexistence of charge density wave (CDW) and superconductivity in vanadium Kagome metals, specifically AV3Sb5 (where A represents K, Rb, or Cs). The formation of a star of David CDW superstructure, resulting from the coordinated displacements of vanadium ions on a corner sharing triangular lattice, has garnered significant attention in efforts to comprehend the influence of electron phonon interaction within this geometrically intricate lattice. However, understanding of the underlying mechanism behind CDW formation, coupled with symmetry protected lattice vibrations, remains elusive. In this study, we employed time resolved X ray scattering experiments utilising an X ray free electron laser. Our findings reveal that the phonon mode associated with the out of plane motion of Cs ions becomes frustrated in the CDW phase. Furthermore, we observed the photoinduced emergence of a metastable CDW phase, facilitated by the alleviation of frustration through nonadiabatic changes in free energy. By elucidating the longstanding puzzle surrounding the intervention of phonons in CDW ordering, this research offers fresh insights into the competition between phonons and periodic lattice distortions, a phenomenon widespread in other correlated quantum materials including layered high Tc superconductors.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
Emergent Ferromagnetism at LaFeO3/SrTiO3 Interface Arising from Strain-induced Spin-State Transition
Authors:
Menglin Zhu,
Joseph Lanier,
Sevim Polat Genlik,
Jose G. Flores,
Victor da Cruz Pinha Barbosa,
Mohit Randeria,
Patrick M. Woodward,
Maryam Ghazisaeidi,
Fengyuan Yang,
Jinwoo Hwang
Abstract:
Creating new interfacial magnetic states with desired functionalities is attractive for fundamental studies and spintronics applications. The emergence of interfacial magnetic phases demands the fabrication of pristine interfaces and the characterization and understanding of atomic structure as well as electronic, magnetic, and orbital degrees of freedom at the interface. Here, we report a novel i…
▽ More
Creating new interfacial magnetic states with desired functionalities is attractive for fundamental studies and spintronics applications. The emergence of interfacial magnetic phases demands the fabrication of pristine interfaces and the characterization and understanding of atomic structure as well as electronic, magnetic, and orbital degrees of freedom at the interface. Here, we report a novel interfacial insulating ferromagnetic order in antiferromagnetic LaFeO3 grown on SrTiO3, characterized by a combination of electron microscopy and spectroscopy, magnetometry, and density functional theory. The epitaxial strain drives a spin-state disproportionation in the interfacial layer of LaFeO3, which leads to a checkerboard arrangement of low- and high-spin Fe3+ ions inside smaller and larger FeO6 octahedra, respectively. Ferromagnetism at the interface arises from superexchange interactions between the low- and high-spin Fe3+. The detailed understanding of creation of emergent magnetism illustrates the potential of designing and controlling orbital degrees of freedom at the interface to realize novel phases and functionalities for future spin-electronic applications.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Unconventional Unidirectional Magnetoresistance in vdW Heterostructures
Authors:
I-Hsuan Kao,
Junyu Tang,
Gabriel Calderon Ortiz,
Menglin Zhu,
Sean Yuan,
Rahul Rao,
Jiahan Li,
James H. Edgar,
Jiaqiang Yan,
David G. Mandrus,
Kenji Watanabe,
Takashi Taniguchi,
Jinwoo Hwang,
Ran Cheng,
Jyoti Katoch,
Simranjeet Singh
Abstract:
Electrical readout of magnetic states is a key to realize novel spintronics devices for efficient computing and data storage. Unidirectional magnetoresistance (UMR) in bilayer systems, consisting of a spin source material and a magnetic layer, refers to a change in the longitudinal resistance upon the reversal of magnetization, which typically originates from the interaction of spin-current and ma…
▽ More
Electrical readout of magnetic states is a key to realize novel spintronics devices for efficient computing and data storage. Unidirectional magnetoresistance (UMR) in bilayer systems, consisting of a spin source material and a magnetic layer, refers to a change in the longitudinal resistance upon the reversal of magnetization, which typically originates from the interaction of spin-current and magnetization at the interface. Because of UMR s linear dependence on applied charge current and magnetization, it can be used to electrically read the magnetization state. However, in conventional spin source materials, the spin polarization of an electric field induced spin current is restricted to be in the film plane and hence the ensuing UMR can only respond to the in plane component of the magnetization. On the other hand, magnets with perpendicular magnetic anisotropy (PMA) are highly desired for magnetic memory and spin-logic devices, while the electrical read out of PMA magnets through UMR is critically missing. Here, we report the discovery of an unconventional UMR in bilayer heterostructures of a topological semimetal (WTe2) and a PMA ferromagnetic insulator (Cr2Ge2Te6, CGT), which allows to electrically read the up and down magnetic states of the CGT layer by measuring the longitudinal resistance. Our theoretical calculations based on a tight binding model show that the unconventional UMR originates from the interplay of crystal symmetry breaking in WTe2 and magnetic exchange interaction across the WTe2 and CGT interface. Combining with the ability of WTe2 to obtain magnetic field free switching of the PMA magnets, our discoveries open an exciting pathway to achieve two terminal magnetic memory devices that operate solely on the spin orbit torque and UMR, which is critical for developing next-generation non volatile and low power consumption data storage technologies.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Strain-dependent Insulating State and Kondo Effect in Epitaxial SrIrO$_{3}$ Films
Authors:
Gaurab Rimal,
Tanzila Tasnim,
Gabriel Calderon Ortiz,
George E. Sterbinsky,
Jinwoo Hwang,
Ryan B. Comes
Abstract:
The large spin-orbit coupling in iridium oxides plays a significant role in driving novel physical behaviors, including emergent phenomena in the films and heterostructures of perovskite and Ruddlesden-Popper iridates. In this work, we study the role of epitaxial strain on the electronic behavior of thin SrIrO$_3$ films. We find that compressive epitaxial strain leads to metallic transport behavio…
▽ More
The large spin-orbit coupling in iridium oxides plays a significant role in driving novel physical behaviors, including emergent phenomena in the films and heterostructures of perovskite and Ruddlesden-Popper iridates. In this work, we study the role of epitaxial strain on the electronic behavior of thin SrIrO$_3$ films. We find that compressive epitaxial strain leads to metallic transport behavior, but a slight tensile strain shows gapped behavior. Temperature-dependent resistivity measurements are used to examine different behaviors in films as a function of strain. We find Kondo contributions to the resistivity, with stronger effects in films that are thinner and under less compressive epitaxial strain. These results show the potential to tune SrIrO$_3$ into Kondo insulating states and open possibilities for a quantum critical point that can be controlled with strain in epitaxial films.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
An inversion problem for optical spectrum data via physics-guided machine learning
Authors:
Hwiwoo Park,
Jun H. Park,
Jungseek Hwang
Abstract:
We propose the regularized recurrent inference machine (rRIM), a novel machine-learning approach to solve the challenging problem of deriving the pairing glue function from measured optical spectra. The rRIM incorporates physical principles into both training and inference and affords noise robustness, flexibility with out-of-distribution data, and reduced data requirements. It effectively obtains…
▽ More
We propose the regularized recurrent inference machine (rRIM), a novel machine-learning approach to solve the challenging problem of deriving the pairing glue function from measured optical spectra. The rRIM incorporates physical principles into both training and inference and affords noise robustness, flexibility with out-of-distribution data, and reduced data requirements. It effectively obtains reliable pairing glue functions from experimental optical spectra and yields promising solutions for similar inverse problems of the Fredholm integral equation of the first kind.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
Electronic structure of above-room-temperature van der Waals ferromagnet Fe$_3$GaTe$_2$
Authors:
Ji-Eun Lee,
Shaohua Yan,
Sehoon Oh,
Jinwoong Hwang,
Jonathan D. Denlinger,
Choongyu Hwang,
Hechang Lei,
Sung-Kwan Mo,
Se Young Park,
Hyejin Ryu
Abstract:
Fe$_3$GaTe$_2$, a recently discovered van der Waals ferromagnet, demonstrates intrinsic ferromagnetism above room temperature, necessitating a comprehensive investigation of the microscopic origins of its high Curie temperature ($\textit{T}$$_C$). In this study, we reveal the electronic structure of Fe$_3$GaTe$_2$ in its ferromagnetic ground state using angle-resolved photoemission spectroscopy an…
▽ More
Fe$_3$GaTe$_2$, a recently discovered van der Waals ferromagnet, demonstrates intrinsic ferromagnetism above room temperature, necessitating a comprehensive investigation of the microscopic origins of its high Curie temperature ($\textit{T}$$_C$). In this study, we reveal the electronic structure of Fe$_3$GaTe$_2$ in its ferromagnetic ground state using angle-resolved photoemission spectroscopy and density functional theory calculations. Our results establish a consistent correspondence between the measured band structure and theoretical calculations, underscoring the significant contributions of the Heisenberg exchange interaction ($\textit{J}$$_{ex}$) and magnetic anisotropy energy to the development of the high-$\textit{T}$$_C$ ferromagnetic ordering in Fe$_3$GaTe$_2$. Intriguingly, we observe substantial modifications to these crucial driving factors through doping, which we attribute to alterations in multiple spin-splitting bands near the Fermi level. These findings provide valuable insights into the underlying electronic structure and its correlation with the emergence of high-$\textit{T}$$_C$ ferromagnetic ordering in Fe$_3$GaTe$_2$.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Experimentally informed structure optimization of amorphous TiO2 films grown by atomic layer deposition
Authors:
Jun Meng,
Mehrdad Abbasi,
Yutao Dong,
Corey Carlosa,
Xudong Wang,
Jinwoo Hwang,
Dane Morgan
Abstract:
Amorphous titanium dioxide TiO2 (a-TiO2) has been widely studied, particularly as a protective coating layer on semiconductors to prevent corrosion and promote electron-hole conduction in photoelectrochemical reactions. The stability and longevity of a-TiO2 is strongly affected by the thickness and structural heterogeneity, implying that understanding the structure properties of a-TiO2 is crucial…
▽ More
Amorphous titanium dioxide TiO2 (a-TiO2) has been widely studied, particularly as a protective coating layer on semiconductors to prevent corrosion and promote electron-hole conduction in photoelectrochemical reactions. The stability and longevity of a-TiO2 is strongly affected by the thickness and structural heterogeneity, implying that understanding the structure properties of a-TiO2 is crucial for improving the performance. This study characterized the structural and electronic properties of a-TiO2 thin films (~17nm) grown on Si by Atomic Layer Deposition (ALD). Fluctuation spectra V(k) and angular correlation functions were determined with 4-dimensional scanning transmission electron microscopy (4D-STEM), which revealed the distinctive medium-range ordering in the a-TiO2 film. A realistic atomic model of a-TiO2 was established guided by the medium-range ordering and the previously reported short-range ordering of a-TiO2 film, as well as the interatomic potential. The structure was optimized by the StructOpt code using a genetic algorithm that simultaneously minimizes energy and maximizes match to experimental short- and medium-range ordering. The StructOpt a-TiO2 model presents an improved agreements with the medium-range ordering and the k-space location of the dominant 2-fold angular correlations compared with a traditional melt-quenched model. The electronic structure of the StructOpt a-TiO2 model was studied by ab initio calculation and compared to the crystalline phases and experimental results. This work uncovered the medium-range ordering in a-TiO2 thin film and provided a realistic a-TiO2 structure model for further investigation of structure-property relationships and materials design. In addition, the improved multi-objective optimization package StructOpt was provided for structure determination of complex materials guided by experiments and simulations.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
NiGa$_{2}$O$_{4}$ interfacial layers in NiO/Ga$_{2}$O$_{3}$ heterojunction diodes at high temperature
Authors:
Kingsley Egbo,
Emily M. Garrity,
William A. Callahan,
Chris Chae,
Cheng-Wei Lee,
Brooks Tellekamp,
Jinwoo Hwang,
Vladan Stevanovic,
Andriy Zakutayev
Abstract:
NiO/Ga$_{2}$O$_{3}$ heterojunction diodes have attracted attention for high-power applications, but their high-temperature performance and reliability remain underexplored. Here we report on the time evolution of the static electrical properties in the widely studied p-NiO/n-Ga$_{2}$O$_{3}$heterojunction diodes and the formation of NiGa$_{2}$O$_{4}$ interfacial layers when operated at…
▽ More
NiO/Ga$_{2}$O$_{3}$ heterojunction diodes have attracted attention for high-power applications, but their high-temperature performance and reliability remain underexplored. Here we report on the time evolution of the static electrical properties in the widely studied p-NiO/n-Ga$_{2}$O$_{3}$heterojunction diodes and the formation of NiGa$_{2}$O$_{4}$ interfacial layers when operated at $550^{\circ}$C. Results of our thermal cycling experiment show an initial leakage current increase which stabilizes after sustained thermal load, due to reactions at the NiO-Ga$_{2}$O$_{3}$ interface. High-resolution TEM microstructure analysis of the devices after thermal cycling indicates that the NiO-Ga$_{2}$O$_{3}$ interface forms ternary compounds at high temperatures, and thermodynamic calculations suggest the formation of the spinel NiGa$_{2}$O$_{4}$ layer between NiO and Ga$_{2}$O$_{3}$. First-principles defect calculations find that NiGa$_{2}$O$_{4}$ shows low p-type intrinsic doping, and hence can also serve to limit electric field crowding at the interface. Vertical NiO/Ga$_{2}$O$_{3}$ diodes with intentionally grown 5 nm thin spinel-type NiGa$_{2}$O$_{4}$ interfacial layers show excellent device ON/OFF ratio of > 10$^{10}$($\pm$3 V), V$_{ON}$ of ~1.9 V, and breakdown voltage of ~ 1.2 kV for an initial unoptimized 300-micron diameter device. These p-n heterojunction diodes are promising for high-voltage, high-temperature applications.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
From Stoner to Local Moment Magnetism in Atomically Thin Cr2Te3
Authors:
Yong Zhong,
Cheng Peng,
Haili Huang,
Dandan Guan,
Jinwoong Hwang,
Kuan H. Hsu,
Yi Hu,
Chunjing Jia,
Brian Moritz,
Donghui Lu,
Jun-Sik Lee,
Jin-Feng Jia,
Thomas P. Devereaux,
Sung-Kwan Mo,
Zhi-Xun Shen
Abstract:
The field of two-dimensional (2D) ferromagnetism has been proliferating over the past few years, with ongoing interests in basic science and potential applications in spintronic technology. However, a high-resolution spectroscopic study of the 2D ferromagnet is still lacking due to the small size and air sensitivity of the exfoliated nanoflakes. Here, we report a thickness-dependent ferromagnetism…
▽ More
The field of two-dimensional (2D) ferromagnetism has been proliferating over the past few years, with ongoing interests in basic science and potential applications in spintronic technology. However, a high-resolution spectroscopic study of the 2D ferromagnet is still lacking due to the small size and air sensitivity of the exfoliated nanoflakes. Here, we report a thickness-dependent ferromagnetism in epitaxially grown Cr2Te3 thin films and investigate the evolution of the underlying electronic structure by synergistic angle-resolved photoemission spectroscopy, scanning tunneling microscopy, x-ray absorption spectroscopy, and first-principle calculations. A conspicuous ferromagnetic transition from Stoner to Heisenberg-type is directly observed in the atomically thin limit, indicating that dimensionality is a powerful tuning knob to manipulate the novel properties of 2D magnetism. Monolayer Cr2Te3 retains robust ferromagnetism, but with a suppressed Curie temperature, due to the drastic drop in the density of states near the Fermi level. Our results establish atomically thin Cr2Te3 as an excellent platform to explore the dual nature of localized and itinerant ferromagnetism in 2D magnets.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Electrically Driven Spin Resonance of 4f Electrons in a Single Atom on a Surface
Authors:
Stefano Reale,
Jiyoon Hwang,
Jeongmin Oh,
Harald Brune,
Andreas J. Heinrich,
Fabio Donati,
Yujeong Bae
Abstract:
A pivotal challenge in quantum technologies lies in reconciling long coherence times with efficient manipulation of the quantum states of a system. Lanthanide atoms, with their well-localized 4f electrons, emerge as a promising solution to this dilemma if provided with a rational design for manipulation and detection. Here we construct tailored spin structures to perform electron spin resonance on…
▽ More
A pivotal challenge in quantum technologies lies in reconciling long coherence times with efficient manipulation of the quantum states of a system. Lanthanide atoms, with their well-localized 4f electrons, emerge as a promising solution to this dilemma if provided with a rational design for manipulation and detection. Here we construct tailored spin structures to perform electron spin resonance on a single lanthanide atom using a scanning tunneling microscope. A magnetically coupled structure made of an erbium and a titanium atom enables us to both drive the erbium's 4f electron spins and indirectly probe them through the titanium's 3d electrons. In this coupled configuration, the erbium spin states exhibit a five-fold increase in the spin relaxation time and a two-fold increase in the driving efficiency compared to the 3d electron counterparts. Our work provides a new approach to accessing highly protected spin states, enabling their coherent control in an all-electric fashion.
△ Less
Submitted 26 September, 2023; v1 submitted 5 September, 2023;
originally announced September 2023.
-
Doping-dependent superconducting physical quantities of K-doped BaFe$_2$As$_2$ obtained through infrared spectroscopy
Authors:
Seokbae Lee,
Yu-Seong Seo,
Seulki Roh,
Dongjoon Song,
Hiroshi Eisaki,
Jungseek Hwang
Abstract:
We investigated four single crystals of K-doped BaFe$_2$As$_2$ (Ba-122), Ba$_{1-x}$K$_x$Fe$_2$As$_2$ with $x$ = 0.29, 0.36, 0.40, and 0.51, using infrared spectroscopy. We explored a wide variety of doping levels, from under- to overdoped. We obtained the superfluid plasma frequencies ($Ω_{\mathrm{sp}}$) and corresponding London penetration depths ($λ_{\mathrm{L}}$) from the measured optical condu…
▽ More
We investigated four single crystals of K-doped BaFe$_2$As$_2$ (Ba-122), Ba$_{1-x}$K$_x$Fe$_2$As$_2$ with $x$ = 0.29, 0.36, 0.40, and 0.51, using infrared spectroscopy. We explored a wide variety of doping levels, from under- to overdoped. We obtained the superfluid plasma frequencies ($Ω_{\mathrm{sp}}$) and corresponding London penetration depths ($λ_{\mathrm{L}}$) from the measured optical conductivity spectra. We also extracted the electron-boson spectral density (EBSD) functions using a two-parallel charge transport channel approach in the superconducting (SC) state. From the extracted EBSD functions, the maximum SC transition temperatures ($T_c^{\mathrm{Max}}$) were determined using a generalized McMillan formula and the SC coherence lengths ($ξ_{\mathrm{SC}}$) were calculated using the timescales encoded in the EBSD functions and reported Fermi velocities. We identified some similarities and differences in the doping-dependent SC quantities between the K-doped Ba-122 and the hole-doped cuprates. We expect that the various SC quantities obtained across the wide doping range will provide helpful information for establishing the microscopic pairing mechanism in Fe-pnictide superconductors.
△ Less
Submitted 13 August, 2023;
originally announced August 2023.
-
Bosonic spectrum of a correlated multiband system, BaFe1.80Co0.20As2, obtained via infrared spectroscopy
Authors:
Chandan Kumar Panda,
Hong Gu Lee,
Hwiwoo Park,
Soon-Gil Jung,
Ki-Young Choi,
Jungseek Hwang
Abstract:
We investigated a single crystal BaFe(2-x)CoxAs2 (Co-doped BaFe2As2: Co-doped Ba122) with x = 0.20 using infrared spectroscopy. We obtained the bosonic spectrum from the measured spectrum using an extended Drude-Lorentz model for the normal state and a two-parallel-channel approach for the superconducting (SC) state, based on the generalized Allen formula. The coupling constant, maximum SC transit…
▽ More
We investigated a single crystal BaFe(2-x)CoxAs2 (Co-doped BaFe2As2: Co-doped Ba122) with x = 0.20 using infrared spectroscopy. We obtained the bosonic spectrum from the measured spectrum using an extended Drude-Lorentz model for the normal state and a two-parallel-channel approach for the superconducting (SC) state, based on the generalized Allen formula. The coupling constant, maximum SC transition temperature, SC coherence length, and upper critical field were extracted from the bosonic spectrum. The superfluid plasma frequency and the London penetration depth were obtained from the optical conductivity. We compared the physical quantities of Co-doped Ba122 and K-doped Ba122 and found some interesting differences. Our results may be helpful for understanding superconductivity in doped Ba122 systems and may provide useful information on doped Ba122 systems for their applications.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Planckian behavior of cuprates at the pseudogap critical point simulated via flat electron-boson spectral density
Authors:
Hwiwoo Park,
Jun H. Park,
Jungseek Hwang
Abstract:
Planckian behavior has been recently observed in La1.76Sr0.24CuO4 at the pseudogap critical point. The Planckian behavior takes place in an intriguing quantum metallic state at a quantum critical point. Here, the Planckian behavior was simulated with an energy-independent (or flat) and weakly temperature-dependent electron-boson spectral density (EBSD) function by using a generalized Allen's (Shul…
▽ More
Planckian behavior has been recently observed in La1.76Sr0.24CuO4 at the pseudogap critical point. The Planckian behavior takes place in an intriguing quantum metallic state at a quantum critical point. Here, the Planckian behavior was simulated with an energy-independent (or flat) and weakly temperature-dependent electron-boson spectral density (EBSD) function by using a generalized Allen's (Shulga's) formula. We obtained various optical quantities from the flat EBSD function, such as the optical scattering rate, the optical effective mass, and the optical conductivity. These quantities are well fitted with the recently observed Planckian behavior. Fermi-liquid behavior was also simulated with an energy-linear and temperature-independent EBSD function. The EBSD functions agree well with the overall doping- and temperature-dependent trends of the EBSD function obtained from the optically measured spectra of cuprate systems, which can be crucial for understanding the microscopic electron-pairing mechanism for high-Tc superconductivity in cuprates.
△ Less
Submitted 4 April, 2024; v1 submitted 9 August, 2023;
originally announced August 2023.
-
Fermi liquid-like behaviour of cuprates in the pseudogap phase simulated via T-dependent electron-boson spectral density
Authors:
Hwiwoo Park,
Jungseek Hwang
Abstract:
We investigated the temperature- and frequency-dependent optical scattering rates in the pseudogap phase of cuprates using model pseudogap and electron-boson spectral density (EBSD) functions. We obtained the scattering rates at various temperatures below and above a given pseudogap temperature using a generalized Allen's (or Sharapov's) formula, which has been used to analyse the measured optical…
▽ More
We investigated the temperature- and frequency-dependent optical scattering rates in the pseudogap phase of cuprates using model pseudogap and electron-boson spectral density (EBSD) functions. We obtained the scattering rates at various temperatures below and above a given pseudogap temperature using a generalized Allen's (or Sharapov's) formula, which has been used to analyse the measured optical spectra of correlated electron systems with a non-constant density of states at finite temperatures. The pseudogap and EBSD functions should be temperature dependent to simulate the Fermi liquid-like behaviour of underdoped cuprate systems observed in optical studies. Therefore, the observed Fermi liquid-like behaviour can be understood by considering the combined contribution from the T-dependent EBSD function and the T-dependent pseudogap. We also obtained the optical conductivity spectra from the optical scattering rates and analyzed them to investigate intriguing electronic properties. We expect that our results will aid in understanding the Fermi liquid-like optical response in the pseudogap phase and in revealing the microscopic pairing mechanism for superconductivity in cuprates.
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Emergence of flat bands and ferromagnetic fluctuations via orbital-selective electron correlations in Mn-based kagome metal
Authors:
Subhasis Samanta,
Hwiwoo Park,
Chanhyeon Lee,
Sungmin Jeon,
Hengbo Cui,
Yong-Xin Yao,
Jungseek Hwang,
Kwang-Yong Choi,
Heung-Sik Kim
Abstract:
Kagome lattice has been actively studied for the possible realization of frustration-induced two-dimensional flat bands and a number of correlation-induced phases. Currently, the search for kagome systems with a nearly dispersionless flat band close to the Fermi level is ongoing. Here, by combining theoretical and experimental tools, we present Sc$_3$Mn$_3$Al$_7$Si$_5$ as a novel realization of co…
▽ More
Kagome lattice has been actively studied for the possible realization of frustration-induced two-dimensional flat bands and a number of correlation-induced phases. Currently, the search for kagome systems with a nearly dispersionless flat band close to the Fermi level is ongoing. Here, by combining theoretical and experimental tools, we present Sc$_3$Mn$_3$Al$_7$Si$_5$ as a novel realization of correlation-induced almost-flat bands in the kagome lattice in the vicinity of the Fermi level. Our magnetic susceptibility, $^{27}$Al nuclear magnetic resonance, transport, and optical conductivity measurements provide signatures of a correlated metallic phase with tantalizing ferromagnetic instability. Our dynamical mean-field calculations suggest that such ferromagnetic instability observed originates from the formation of nearly flat dispersions close to the Fermi level, where electron correlations induce strong orbital-selective renormalization and manifestation of the kagome-frustrated bands. In addition, a significant negative magnetoresistance signal is observed, which can be attributed to the suppression of flat-band-induced ferromagnetic fluctuation, which further supports the formation of flat bands in this compound. These findings broaden a new prospect to harness correlated topological phases via multiorbital correlations in 3$d$-based kagome systems.
△ Less
Submitted 25 June, 2024; v1 submitted 10 April, 2023;
originally announced April 2023.
-
FerroHEMTs: High-Current and High-Speed All-Epitaxial AlScN/GaN Ferroelectric Transistors
Authors:
J. Casamento,
K. Nomoto,
T. S. Nguyen,
H. Lee,
C. Savant,
L. Li,
A. Hickman,
T. Maeda,
J. Encomendero,
V. Gund,
A. Lal,
J. C. M. Hwang,
H. G. Xing,
D. Jena
Abstract:
We report the first observation of ferroelectric gating in AlScN barrier wide-bandgap nitride transistors. These FerroHEMT devices realized by direct epitaxial growth represent a new class of ferroelectric transistors in which the semiconductor is itself polar, and the crystalline ferroelectric barrier is lattice-matched to the substrate. The FerroHEMTs reported here use the thinnest nitride high…
▽ More
We report the first observation of ferroelectric gating in AlScN barrier wide-bandgap nitride transistors. These FerroHEMT devices realized by direct epitaxial growth represent a new class of ferroelectric transistors in which the semiconductor is itself polar, and the crystalline ferroelectric barrier is lattice-matched to the substrate. The FerroHEMTs reported here use the thinnest nitride high K and ferroelectric barriers to date to deliver the highest on currents at 4 A/mm, and highest speed AlScN transistors with fmax larger than 150 GHz observed in any ferroelectric transistor. The FerroHEMTs exhibit hysteretic Id Vgs loops with subthreshold slopes below the Boltzmann limit. A control AlN barrier HEMT exhibits neither hysteretic, nor sub Boltzmann behavior. While these results introduce the first epitaxial high K and ferroelectric barrier technology to RF and mm wave electronics, they are also of interest as a new material platform for combining memory and logic functionalities in digital electronics.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Metalorganic Chemical Vapor Deposition of \b{eta}-(AlxGa1-x)2O3 thin films on (001) \b{eta}-Ga2O3 substrates
Authors:
A. F. M. Anhar Uddin Bhuiyan,
Lingyu Meng,
Hsien-Lien Huang,
Jith Sarker,
Chris Chae,
Baishakhi Mazumder,
Jinwoo Hwang,
Hongping Zhao
Abstract:
Phase pure \b{eta}-(AlxGa1-x)2O3 thin films are grown on (001) oriented \b{eta}-Ga2O3 substrates via metalorganic chemical vapor deposition (MOCVD). By systematically tuning the precursor molar flow rates, the epitaxial growth of coherently strained \b{eta}-(AlxGa1-x)2O3 films are demonstrated with up to 25% Al compositions as evaluated by high resolution x-ray diffraction (XRD). The asymmetrical…
▽ More
Phase pure \b{eta}-(AlxGa1-x)2O3 thin films are grown on (001) oriented \b{eta}-Ga2O3 substrates via metalorganic chemical vapor deposition (MOCVD). By systematically tuning the precursor molar flow rates, the epitaxial growth of coherently strained \b{eta}-(AlxGa1-x)2O3 films are demonstrated with up to 25% Al compositions as evaluated by high resolution x-ray diffraction (XRD). The asymmetrical reciprocal space mapping confirms the growth of coherent \b{eta}-(AlxGa1-x)2O3 films (x < 25%) on (001) \b{eta}-Ga2O3 substrates. While the films show smooth surface morphologies, the alloy inhomogeneity with local segregation of Al along (-201) plane is observed from atomic resolution STEM imaging, resulting in wavy and inhomogeneous interfaces in \b{eta}-(AlxGa1-x)2O3/\b{eta}-Ga2O3 superlattice structure. Room temperature Raman spectra of \b{eta}-(AlxGa1-x)2O3 films show similar characteristics peaks as (001) \b{eta}-Ga2O3 substrate without obvious Raman shifts for films with different Al compositions. Atom probe tomography (APT) was used to investigate the atomic level structural chemistry with increasing Al content in the \b{eta}-(AlxGa1-x)2O3 films. A monotonous increase in chemical heterogeneity is observed from the in-plane Al/Ga distributions which was further confirmed via statistical frequency distribution analysis (FDA). Although the films exhibit alloy fluctuations, n-type doping with good electrical properties are demonstrated for films with various Al compositions. The determined valence and conduction band offsets at \b{eta}-(AlxGa1-x)2O3/\b{eta}-Ga2O3 heterojunctions using x-ray photoelectron spectroscopy (XPS) reveal the formation of type-II (staggered) band alignment.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Imaging the breakdown and restoration of topological protection in magnetic topological insulator MnBi$_2$Te$_4$
Authors:
Qile Li,
Iolanda Di Bernardo,
Johnathon Maniatis,
Daniel McEwen,
Liam Watson,
Benjamin Lowe,
Thi-Hai-Yen Vu,
Chi Xuan Trang,
Jinwoong Hwang,
Sung-Kwan Mo,
Michael S. Fuhrer,
Mark T. Edmonds
Abstract:
Quantum anomalous Hall (QAH) insulators transport charge without resistance along topologically protected chiral one-dimensional edge states. Yet, in magnetic topological insulators (MTI) to date, topological protection is far from robust, with the zero-magnetic field QAH effect only realised at temperatures an order of magnitude below the Néel temperature TN, though small magnetic fields can stab…
▽ More
Quantum anomalous Hall (QAH) insulators transport charge without resistance along topologically protected chiral one-dimensional edge states. Yet, in magnetic topological insulators (MTI) to date, topological protection is far from robust, with the zero-magnetic field QAH effect only realised at temperatures an order of magnitude below the Néel temperature TN, though small magnetic fields can stabilize QAH effect. Understanding why topological protection breaks down is therefore essential to realising QAH effect at higher temperatures. Here we use a scanning tunnelling microscope to directly map the size of the exchange gap (Eg,ex) and its spatial fluctuation in the QAH insulator 5-layer MnBi$_2$Te$_4$. We observe long-range fluctuations of Eg,ex with values ranging between 0 (gapless) and 70 meV, uncorrelated to individual point defects. We directly image the breakdown of topological protection, showing that the chiral edge state, the hallmark signature of a QAH insulator, hybridizes with extended gapless metallic regions in the bulk. Finally, we unambiguously demonstrate that the gapless regions originate in magnetic disorder, by demonstrating that a small magnetic field restores Eg,ex in these regions, explaining the recovery of topological protection in magnetic fields. Our results indicate that overcoming magnetic disorder is key to exploiting the unique properties of QAH insulators.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Metal to Mott Insulator Transition in Two-dimensional 1T-TaSe$_2$
Authors:
Ning Tian,
Zhe Huang,
Bo Gyu Jang,
Shuaifei Guo,
Ya-Jun Yan,
Jingjing Gao,
Yijun Yu,
Jinwoong Hwang,
Meixiao Wang,
Xuan Luo,
Yu Ping Sun,
Zhongkai Liu,
Dong-Lai Feng,
Xianhui Chen,
Sung-Kwan Mo,
Minjae Kim,
Young-Woo Son,
Dawei Shen,
Wei Ruan,
Yuanbo Zhang
Abstract:
When electron-electron interaction dominates over other electronic energy scales, exotic, collective phenomena often emerge out of seemingly ordinary matter. The strongly correlated phenomena, such as quantum spin liquid and unconventional superconductivity, represent a major research frontier and a constant source of inspiration. Central to strongly correlated physics is the concept of Mott insul…
▽ More
When electron-electron interaction dominates over other electronic energy scales, exotic, collective phenomena often emerge out of seemingly ordinary matter. The strongly correlated phenomena, such as quantum spin liquid and unconventional superconductivity, represent a major research frontier and a constant source of inspiration. Central to strongly correlated physics is the concept of Mott insulator, from which various other correlated phases derive. The advent of two-dimensional (2D) materials brings unprecedented opportunities to the study of strongly correlated physics in the 2D limit. In particular, the enhanced correlation and extreme tunability of 2D materials enables exploring strongly correlated systems across uncharted parameter space. Here, we discover an intriguing metal to Mott insulator transition in 1T-TaSe$_2$ as the material is thinned down to atomic thicknesses. Specifically, we discover, for the first time, that the bulk metallicity of 1T-TaSe$_2$ arises from a band crossing Fermi level. Reducing the dimensionality effectively quenches the kinetic energy of the initially itinerant electrons and drives the material into a Mott insulating state. The dimensionality-driven Metal to Mott insulator transition resolves the long-standing dichotomy between metallic bulk and insulating surface of 1T-TaSe$_2$. Our results additionally establish 1T-TaSe$_2$ as an ideal variable system for exploring various strongly correlated phenomena.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Ultra-Wide Bandgap Ga$_2$O$_3$-on-SiC MOSFETs
Authors:
Yiwen Song,
Arkka Bhattacharyya,
Anwarul Karim,
Daniel Shoemaker,
Hsien-Lien Huang,
Saurav Roy,
Craig McGray,
Jacob H. Leach,
Jinwoo Hwang,
Sriram Krishnamoorthy,
Sukwon Choi
Abstract:
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O…
▽ More
Ulta-wide bandgap semiconductors based on $β$-Ga$_2$O$_3$ offer the potential to achieve higher power switching performance, efficiency, and lower manufacturing cost than today's wide bandgap power semiconductors. However, the most critical challenge to the commercialization of Ga$_2$O$_3$ electronics is overheating, which impacts the device's performance and reliability. We fabricated a Ga$_2$O$_3$/4H-SiC composite wafer using a fusion-bonding method. A low temperature ($\le$ 600 $^{\circ}$C) epitaxy and device processing approach based on low-temperature (LT) metalorganic vapor phase epitaxy is developed to grow a Ga$_2$O$_3$ epitaxial channel layer on the composite wafer and subsequently fabricate into Ga$_2$O$_3$ power MOSFETs. This LT approach is essential to preserve the structural integrity of the composite wafer. These LT-grown epitaxial Ga$_2$O$_3$ MOSFETs deliver high thermal performance (56% reduction in channel temperature), high voltage blocking capabilities up to 2.45 kV, and power figures of merit of $\sim$ 300 MW/cm$^2$, which is a record high for any heterogeneously integrated Ga$_2$O$_3$ devices reported to date. This work is the first realization of multi-kilovolt homoepitaxial Ga$_2$O$_3$ power MOSFETs fabricated on a composite substrate with high heat transfer performance which delivers state-of-the-art power density values while running much cooler than those on native substrates. Thermal characterization and modeling results reveal that a Ga$_2$O$_3$/diamond composite wafer with a reduced Ga$_2$O$_3$ thickness ($\sim$ 1 $μ$m) and thinner bonding interlayer ($<$ 10 nm) can reduce the device thermal impedance to a level lower than today's GaN-on-SiC power switches.
△ Less
Submitted 21 February, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
A novel $\sqrt{19}\times\sqrt{19}$ superstructure in epitaxially grown 1T-TaTe$_2$
Authors:
Jinwoong Hwang,
Yeongrok Jin,
Canxun Zhang,
Tiancong Zhu,
Kyoo Kim,
Yong Zhong,
Ji-Eun Lee,
Zongqi Shen,
Yi Chen,
Wei Ruan,
Hyejin Ryu,
Choongyu Hwang,
Jaekwang Lee,
Michael F. Crommie,
Sung-Kwan Mo,
Zhi-Xun Shen
Abstract:
The spontaneous formation of electronic orders is a crucial element for understanding complex quantum states and engineering heterostructures in two-dimensional materials. We report a novel $\sqrt{19}\times\sqrt{19}$ charge order in few-layer thick 1T-TaTe$_2$ transition metal dichalcogenide films grown by molecular beam epitaxy, which has not been realized. Our photoemission and scanning probe me…
▽ More
The spontaneous formation of electronic orders is a crucial element for understanding complex quantum states and engineering heterostructures in two-dimensional materials. We report a novel $\sqrt{19}\times\sqrt{19}$ charge order in few-layer thick 1T-TaTe$_2$ transition metal dichalcogenide films grown by molecular beam epitaxy, which has not been realized. Our photoemission and scanning probe measurements demonstrate that monolayer 1T-TaTe$_2$ exhibits a variety of metastable charge density wave orders, including the $\sqrt{19}\times\sqrt{19}$ superstructure, which can be selectively stabilized by controlling the post-growth annealing temperature. Moreover, we find that only the $\sqrt{19}\times\sqrt{19}$ order persists in 1T-TaTe$_2$ films thicker than a monolayer, up to 8 layers. Our findings identify the previously unrealized novel electronic order in a much-studied transition metal dichalcogenide and provide a viable route to control it within the epitaxial growth process.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Development of a Scanning Tunneling Microscope for Variable Temperature Electron Spin Resonance
Authors:
Jiyoon Hwang,
Denis Krylov,
Robertus J. G. Elbertse,
Sangwon Yoon,
Taehong Ahn,
Jeongmin Oh,
Lei Fang,
Won-jun Jang,
Franklin H. Cho,
Andreas J. Heinrich,
Yujeong Bae
Abstract:
Recent advances in increasing the spectroscopic energy resolution in scanning tunneling microscopy (STM) have been achieved by integrating electron spin resonance (ESR) with STM. Here, we demonstrate the design and performance of a home-built STM capable of ESR at temperatures ranging from 1 K to 10 K. The STM is incorporated with a home-built Joule-Thomson refrigerator and a 2-axis vector magnet.…
▽ More
Recent advances in increasing the spectroscopic energy resolution in scanning tunneling microscopy (STM) have been achieved by integrating electron spin resonance (ESR) with STM. Here, we demonstrate the design and performance of a home-built STM capable of ESR at temperatures ranging from 1 K to 10 K. The STM is incorporated with a home-built Joule-Thomson refrigerator and a 2-axis vector magnet. Our STM design allows for the deposition of atoms and molecules directly into the cold STM, eliminating the need to extract the sample for deposition. In addition, we adopt two methods to apply radio-frequency (RF) voltages to the tunnel junction, the early design of wiring to the STM tip directly, and a more recent idea to use an RF antenna. Direct comparisons of ESR results measured using the two methods and simulations of electric field distribution around the tunnel junction show that, despite their different designs and capacitive couplings to the tunnel junction, there is no discernible difference in the driving and detection of ESR. Furthermore, at a magnetic field of 1.6 T, we observe ESR signals (near 40 GHz) sustained up to 10 K, which is the highest temperature for ESR-STM measurement reported to date, to the best of our knowledge. Although the ESR intensity exponentially decreases with increasing temperature, our ESR-STM system with low noise at the tunnel junction allows us to measure weak ESR signals with intensities in the sub-fA range. Our new design of ESR-STM, which is operational in a large frequency and temperature range, can broaden the use of ESR spectroscopy in STM and enable the simple modification of existing STM systems, which will hopefully accelerate a generalized use of ESR-STM.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
In-situ MOCVD Growth and Band Offsets of Al$_2$O$_3$ Dielectric on $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ thin films
Authors:
A F M Anhar Uddin Bhuiyan,
Lingyu Meng,
Hsien-Lien Huang,
Jinwoo Hwang,
Hongping Zhao
Abstract:
The in-situ metalorganic chemical vapor deposition (MOCVD) growth of Al$_2$O$_3$ dielectrics on $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films is investigated as a function of crystal orientations and Al compositions of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The interface and film qualities of Al$_2$O$_3$ dielectrics are evaluated by high resolution X-ray diffraction (HR-XRD) and scanni…
▽ More
The in-situ metalorganic chemical vapor deposition (MOCVD) growth of Al$_2$O$_3$ dielectrics on $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films is investigated as a function of crystal orientations and Al compositions of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The interface and film qualities of Al$_2$O$_3$ dielectrics are evaluated by high resolution X-ray diffraction (HR-XRD) and scanning transmission electron microscopy (HR-STEM) imaging, which indicate the growth of high quality amorphous Al$_2$O$_3$ dielectrics with abrupt interfaces on (010), (100) and (-201) oriented $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films. The surface stoichiometries of Al$_2$O$_3$ deposited on all orientations of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ are found to be well maintained with a bandgap energy of 6.91 eV as evaluated by high resolution x-ray photoelectron spectroscopy, which is consistent with the atomic layer deposited (ALD) Al$_2$O$_3$ dielectrics. The evolution of band offsets at both in-situ MOCVD and ex-situ ALD deposited Al$_2$O$_3$/$β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ are determined as a function of Al composition, indicating the influence of the deposition method, orientation, and Al composition of $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ films on resulting band alignments. Type II band alignments are determined at the MOCVD grown Al$_2$O$_3$/$β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ interfaces for (010) and (100) orientations, whereas type I band alignments with relatively lower conduction band offsets are observed along (-201) orientation. Results from this work revealed that the in-situ MOCVD deposited high quality Al$_2$O$_3$ dielectrics with sharp interfaces can be considered as a viable alternative of commonly used ex-situ deposited (ALD) Al$_2$O$_3$ for developing high performance $β$-Ga$_2$O$_3$ and $β$-(Al$_x$Ga$_{1-x}$)$_2$O$_3$ based devices.
△ Less
Submitted 12 October, 2022; v1 submitted 26 July, 2022;
originally announced July 2022.
-
MOCVD growth and band offsets of \k{appa}-phase Ga2O3 on sapphire, GaN, AlN and YSZ substrates
Authors:
A F M Anhar Uddin Bhuiyan,
Zixuan Feng,
Hsien-Lien Huang,
Lingyu Meng,
Jinwoo Hwang,
Hongping Zhao
Abstract:
Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on…
▽ More
Epitaxial growth of \k{appa}-phase Ga2O3 thin films are investigated on c-plane sapphire, GaN- and AlNon-sapphire, and (100) oriented yttria stabilized zirconia (YSZ) substrates via metalorganic chemical vapor deposition (MOCVD). The structural and surface morphological properties are investigated by comprehensive material characterization. Phase pure \k{appa}-Ga2O3 films are successfully grown on GaN-, AlN-on sapphire, and YSZ substrates through a systematical tuning of the growth parameters including the precursor molar flow rates, chamber pressure and growth temperature, whereas the growth on c-sapphire substrates leads to a mixture of \b{eta}- and \k{appa}polymorphs of Ga2O3 under the investigated growth conditions. The influence of the crystalline structure, surface morphology and roughness of \k{appa}-Ga2O3 films grown on different substrates are investigated as a function of precursor flow rate. High resolution scanning transmission electron microscopy (HR-STEM) imaging of \k{appa}-Ga2O3 films reveals abrupt interfaces between the epitaxial film and the sapphire, GaN and YSZ substrates. The growth of single crystal orthorhombic \k{appa}Ga2O3 films is confirmed by analyzing the STEM nano-diffraction pattern. The chemical composition, surface stoichiometry, and the bandgap energies of \k{appa}-Ga2O3 thin films grown on different substrates are studied by high resolution x-ray photoelectron spectroscopy (XPS) measurements. The type-II (staggered) band alignments at three interfaces between \k{appa}-Ga2O3 and c-sapphire, AlN, and YSZ substrates are determined by XPS, with the exception of \k{appa}-Ga2O3/GaN interface, which shows type I (straddling) band alignment.
△ Less
Submitted 12 October, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
Multiplication of freestanding semiconductor membranes from a single wafer by advanced remote epitaxy
Authors:
Hyunseok Kim,
Yunpeng Liu,
Kuangye Lu,
Celesta S. Chang,
Kuan Qiao,
Ki Seok Kim,
Bo-In Park,
Junseok Jeong,
Menglin Zhu,
Jun Min Suh,
Yongmin Baek,
You Jin Ji,
Sungsu Kang,
Sangho Lee,
Ne Myo Han,
Chansoo Kim,
Chanyeol Choi,
Xinyuan Zhang,
Haozhe Wang,
Lingping Kong,
Jungwon Park,
Kyusang Lee,
Geun Young Yeom,
Sungkyu Kim,
Jinwoo Hwang
, et al. (4 additional authors not shown)
Abstract:
Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to…
▽ More
Freestanding single-crystalline membranes are an important building block for functional electronics. Especially, compounds semiconductor membranes such as III-N and III-V offer great opportunities for optoelectronics, high-power electronics, and high-speed computing. Despite huge efforts to produce such membranes by detaching epitaxial layers from donor wafers, however, it is still challenging to harvest epitaxial layers using practical processes. Here, we demonstrate a method to grow and harvest multiple epitaxial membranes with extremely high throughput at the wafer scale. For this, 2D materials are directly formed on III-N and III-V substrates in epitaxy systems, which enables an advanced remote epitaxy scheme comprised of multiple alternating layers of 2D materials and epitaxial layers that can be formed by a single epitaxy run. Each epilayer in the multi-stack structure is then harvested by layer-by-layer peeling, producing multiple freestanding membranes with unprecedented throughput from a single wafer. Because 2D materials allow peeling at the interface without damaging the epilayer or the substrate, wafers can be reused for subsequent membrane production. Therefore, this work represents a meaningful step toward high-throughput and low-cost production of single-crystal membranes that can be heterointegrated.
△ Less
Submitted 7 April, 2022;
originally announced April 2022.
-
Large-gap insulating dimer ground state in monolayer IrTe2
Authors:
Jinwoong Hwang,
Kyoo Kim,
Canxun Zhang,
Tiancong Zhu,
Charlotte Herbig,
Sooran Kim,
Bongjae Kim,
Yong Zhong,
Mohamed Salah,
Mohamed M. El-Desoky,
Choongyu Hwang,
Zhi-Xun Shen,
Michael F. Crommie,
Sung-Kwan Mo
Abstract:
Monolayers of two-dimensional van der Waals materials exhibit novel electronic phases distinct from their bulk due to the symmetry breaking and reduced screening in the absence of the interlayer coupling. In this work, we combine angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy to demonstrate the emergence of a unique insulating 2 x 1 dimer ground state in m…
▽ More
Monolayers of two-dimensional van der Waals materials exhibit novel electronic phases distinct from their bulk due to the symmetry breaking and reduced screening in the absence of the interlayer coupling. In this work, we combine angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy to demonstrate the emergence of a unique insulating 2 x 1 dimer ground state in monolayer 1T-IrTe2 that has a large band gap in contrast to the metallic bilayer-to-bulk forms of this material. First-principles calculations reveal that phonon and charge instabilities as well as local bond formation collectively enhance and stabilize a charge-ordered ground state. Our findings provide important insights into the subtle balance of interactions having similar energy scales that occurs in the absence of strong interlayer coupling, which offers new opportunities to engineer the properties of 2D monolayers.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Electron-hole symmetry in quasiparticle spectral weight of cuprates observed via infrared and photoemission spectroscopy
Authors:
Myounghoon Lee,
Dongjoon Song,
Yu-Seong Seo,
Seulki Roh,
Seokbae Lee,
Hirosh Eisaki,
Jungseek Hwang
Abstract:
We performed an optical spectroscopy study on single crystals of Pr$_{0.85}$LaCe$_{0.15}$CuO$_{4-δ}$ (PLCCO) to revisit the electron-hole asymmetry, which has been understood as a fundamental property of cuprates. Four differently annealed samples - as-grown, reduced, optimally oxygenated, and over-oxygenated samples - were prepared, which have superconducting transition temperatures, $T_c$ = 0, 1…
▽ More
We performed an optical spectroscopy study on single crystals of Pr$_{0.85}$LaCe$_{0.15}$CuO$_{4-δ}$ (PLCCO) to revisit the electron-hole asymmetry, which has been understood as a fundamental property of cuprates. Four differently annealed samples - as-grown, reduced, optimally oxygenated, and over-oxygenated samples - were prepared, which have superconducting transition temperatures, $T_c$ = 0, 15, 24, and 18 K, respectively. We observed that low-energy quasiparticle spectral weights of all the PLCCO samples are significantly small in comparison with those of other electron-doped cuprate families. Instead, they are rather close to those of hole-doped counterpart La$_{2-x}$Sr$_x$CuO$_4$ (LSCO). Accordingly, estimated effective carrier numbers per Cu atom ($N_{\mathrm{eff}}$/Cu) of superconducting samples are also considerably small, despite their relatively high critical temperatures. Complementary photoemission study reveals that the low-energy quasiparticle spectral weight of PLCCO is much smaller than that of Nd$_{1.85}$Ce$_{0.15}$CuO$_{4-δ}$ (NCCO), consistent with the optical results. Our observations demonstrate that PLCCO provides the electron-hole symmetry in quasiparticle spectral weight, and highlight the importance of Cu3$d$-O2$p$ hybridization to understand the low-energy spectral weight transfer in doped cuprates.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Evidence for a spinon Kondo effect in cobalt atoms on single-layer 1T-TaSe$_2$
Authors:
Yi Chen,
Wen-Yu He,
Wei Ruan,
Jinwoong Hwang,
Shujie Tang,
Ryan L. Lee,
Meng Wu,
Tiancong Zhu,
Canxun Zhang,
Hyejin Ryu,
Feng Wang,
Steven G. Louie,
Zhi-Xun Shen,
Sung-Kwan Mo,
Patrick A. Lee,
Michael F. Crommie
Abstract:
Quantum spin liquids (QSLs) are highly entangled, disordered magnetic states that arise in frustrated Mott insulators and host exotic fractional excitations such as spinons and chargons. Despite being charge insulators some QSLs are predicted to exhibit gapless itinerant spinons that yield metallic behavior in the spin channel. We have deposited isolated magnetic atoms onto single-layer (SL) 1T-Ta…
▽ More
Quantum spin liquids (QSLs) are highly entangled, disordered magnetic states that arise in frustrated Mott insulators and host exotic fractional excitations such as spinons and chargons. Despite being charge insulators some QSLs are predicted to exhibit gapless itinerant spinons that yield metallic behavior in the spin channel. We have deposited isolated magnetic atoms onto single-layer (SL) 1T-TaSe$_2$, a gapless QSL candidate, to experimentally probe how itinerant spinons couple to impurity spin centers. Using scanning tunneling spectroscopy we observe the emergence of new, impurity-induced resonance peaks at the 1T-TaSe$_2$ Hubbard band edges when cobalt adatoms are positioned to have maximal spatial overlap with the Hubbard band charge distribution. These resonance peaks disappear when the spatial overlap is reduced or when the magnetic impurities are replaced with non-magnetic impurities. Theoretical simulations using a modified Anderson impurity model integrated with a gapless quantum spin liquid show that these resonance peaks are consistent with a Kondo resonance induced by spinons combined with spinon-chargon binding effects that arise due to QSL gauge-field fluctuations.
△ Less
Submitted 15 February, 2022;
originally announced February 2022.
-
Kinetically-controlled epitaxial growth of Fe$_3$GeTe$_2$ van der Waals ferromagnetic films
Authors:
Wenyi Zhou,
Alexander J. Bishop,
Menglin Zhu,
Igor Lyalin,
Robert C. Walko,
Jay A. Gupta,
Jinwoo Hwang,
Roland K. Kawakami
Abstract:
We demonstrate that kinetics play an important role in the epitaxial growth of Fe$_3$GeTe$_2$ (FGT) van der Waals (vdW) ferromagnetic films by molecular beam epitaxy. By varying the deposition rate, we control the formation or suppression of an initial tellurium-deficient non-van der Waals phase (Fe$_3$Ge$_2$) prior to realizing epitaxial growth of the vdW FGT phase. Using cross-sectional scanning…
▽ More
We demonstrate that kinetics play an important role in the epitaxial growth of Fe$_3$GeTe$_2$ (FGT) van der Waals (vdW) ferromagnetic films by molecular beam epitaxy. By varying the deposition rate, we control the formation or suppression of an initial tellurium-deficient non-van der Waals phase (Fe$_3$Ge$_2$) prior to realizing epitaxial growth of the vdW FGT phase. Using cross-sectional scanning transmission electron microscopy and scanning tunneling microscopy, we optimize the FGT films to have atomically smooth surfaces and abrupt interfaces with the Ge(111) substrate. The magnetic properties of our high quality material are confirmed through magneto-optic, magnetotransport, and spin-polarized STM studies. Importantly, this demonstrates how the interplay of energetics and kinetics can help tune the re-evaporation rate of chalcogen atoms and interdiffusion from the underlayer, which paves the way for future studies of van der Waals epitaxy.
△ Less
Submitted 8 February, 2022;
originally announced February 2022.
-
Evidences for the exciton gas phase and its condensation in monolayer 1T-ZrTe2
Authors:
Yekai Song,
Chunjing Jia,
Hongyu Xiong,
Binbin Wang,
Zhicheng Jiang,
Kui Huang,
Jinwoong Hwang,
Zhuojun Li,
Choongyu Hwang,
Zhongkai Liu,
Dawei Shen,
Jonathan Sobota,
Patrick Kirchmann,
Jiamin Xue,
Thomas P. Devereaux,
Sung-Kwan Mo,
Zhi-Xun Shen,
Shujie Tang
Abstract:
The excitonic insulator (EI) is a Bose-Einstein condensation (BEC) of excitons bound by electron-hole interaction in a solid, which could support high-temperature BEC transition. The material realization of EI has been elusive, which is further challenged by the difficulty of distinguishing it from a conventional charge density wave (CDW) state. In the BEC limit, the pre-condensation exciton gas p…
▽ More
The excitonic insulator (EI) is a Bose-Einstein condensation (BEC) of excitons bound by electron-hole interaction in a solid, which could support high-temperature BEC transition. The material realization of EI has been elusive, which is further challenged by the difficulty of distinguishing it from a conventional charge density wave (CDW) state. In the BEC limit, the pre-condensation exciton gas phase is a hallmark to distinguish EI from conventional CDW, yet direct experimental evidence has been lacking. Here we report a distinct correlated phase beyond the $2\times2$ CDW ground state emerging in epitaxially grown monolayer 1T-ZrTe2 and its investigation by angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy (STM). The results show novel band- and energy-dependent folding behavior in a two-step process, evidenced by an exciton gas phase prior to its condensation into the final CDW state. The excellent agreement between experiments and theoretical predictions on the recovery of the pristine band structure by carrier-density-dependent suppression of the CDW state further corroborates the monolayer 1T-ZrTe2 as an EI. Our findings provide a versatile two-dimensional platform that allows tuning of the excitonic effect.
△ Less
Submitted 30 March, 2022; v1 submitted 27 January, 2022;
originally announced January 2022.
-
Swelling, Softening and Elastocapillary Adhesion of Cooked Pasta
Authors:
Jonghyun Hwang,
Jonghyun Ha,
Ryan Siu,
Yun Seong Kim,
Sameh Tawfick
Abstract:
The diverse chemical and physical reactions encountered during cooking connect us to science every day. Here, we theoretically and experimentally investigate the swelling and softening of pasta due to liquid imbibition, as well as the elastic deformation and adhesion of pasta due to capillary force. As water diffuses into the pasta during cooking, it softens gradually from the outside inward as st…
▽ More
The diverse chemical and physical reactions encountered during cooking connect us to science every day. Here, we theoretically and experimentally investigate the swelling and softening of pasta due to liquid imbibition, as well as the elastic deformation and adhesion of pasta due to capillary force. As water diffuses into the pasta during cooking, it softens gradually from the outside inward as starch swells. The softening follows three sequential regimes: Regime I shows a slow decrease of modulus with cooking time; Regime II, the glassy to rubbery transition region, is characterized by very fast, several orders of magnitude drop in modulus; and regime III, the rubbery region, has an asymptotic modulus about four orders of magnitude lower than the raw pasta. We present experiments and theory to capture these regimes and relate them to the heterogeneous microstructure changes associated with swelling. Interestingly, we observe a modulus drop of two orders of magnitude within the range of 'al dente' cooking duration, and we find the modulus to be extremely sensitive to the amount of salt added to the boiling water. While most chefs can gauge the pasta by tasting its texture, our proposed experiment, which only requires a measurement with a ruler, can precisely provide an optimal cooking time finely tuned for various kinds of pasta shapes.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Mixed Alkali-Ion Transport and Storage in Atomic-Disordered Honeycomb Layered $\rm NaKNi_2TeO_6$
Authors:
Titus Masese,
Yoshinobu Miyazaki,
Josef Rizell,
Godwill Mbiti Kanyolo,
Chih-Yao Chen,
Hiroki Ubukata,
Keigo Kubota,
Kartik Sau,
Tamio Ikeshoji,
Zhen-Dong Huang,
Kazuki Yoshii,
Teruo Takahashi,
Miyu Ito,
Hiroshi Senoh,
Jinkwang Hwang,
Abbas Alshehabi,
Kazuhiko Matsumoto,
Toshiyuki Matsunaga,
Kotaro Fujii,
Masatomo Yashima,
Masahiro Shikano,
Cédric Tassel,
Hiroshi Kageyama,
Yoshiharu Uchimoto,
Rika Hagiwara
, et al. (1 additional authors not shown)
Abstract:
Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms ($\rm Na$ and $\rm K$) to produce a mixed alkali honeycomb layered oxide material, namely, $\rm NaKNi_2TeO_6$. Via transmission electron microscopy meas…
▽ More
Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms ($\rm Na$ and $\rm K$) to produce a mixed alkali honeycomb layered oxide material, namely, $\rm NaKNi_2TeO_6$. Via transmission electron microscopy measurements, we reveal the local atomic structural disorders characterised by aperiodic stacking and incoherency in the alternating arrangement of $\rm Na$ and $\rm K$ atoms. We also investigate the possibility of mixed electrochemical transport and storage of $\rm Na$ and $\rm K$ ions in $\rm NaKNi_2TeO_6$. In particular, we report an average discharge cell voltage of about $4\, \rm V$ and a specific capacity of around $80\, \rm mAh\, g^{-1}$ at low specific currents (i.e., $< 10\, \rm mA\, g^{-1}$) when a $\rm NaKNi_2TeO_6$-based positive electrode is combined with a room-temperature $\rm NaK$ liquid alloy negative electrode using an ionic liquid-based electrolyte solution. These results represent a step towards the use of tailored cathode active materials for dendrite-free electrochemical energy storage systems exploiting room-temperature liquid alkali metal alloy materials.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Evolution of electronic structure of Ru-doped single-crystal iridiates, Sr$_2$Ir$_{1-x}$Ru$_x$O$_4$
Authors:
Seokbae Lee,
Yu-Seong Seo,
Eilho Jung,
Seulki Roh,
Myounghoon Lee,
Hwan Young Choi,
Jong Hyuk Kim,
Nara Lee,
Young Jai Choi,
Jungseek Hwang
Abstract:
We investigated Ru-doped single-crystal 5$d$ iridiates, Sr$_2$Ir$_{1-x}$Ru$_x$O$_{4}$, at three different doping concentrations ($x =$ 0.01, 0.07 and 0.10) using optical spectroscopy. The undoped pristine compound (Sr$_2$IrO$_{4}$) is known as a novel $J_{eff}$ = 1/2 Mott insulator. Remarkably, the optical conductivity spectra of all three samples exhibited the insulating behavior, although we obs…
▽ More
We investigated Ru-doped single-crystal 5$d$ iridiates, Sr$_2$Ir$_{1-x}$Ru$_x$O$_{4}$, at three different doping concentrations ($x =$ 0.01, 0.07 and 0.10) using optical spectroscopy. The undoped pristine compound (Sr$_2$IrO$_{4}$) is known as a novel $J_{eff}$ = 1/2 Mott insulator. Remarkably, the optical conductivity spectra of all three samples exhibited the insulating behavior, although we observed weak Drude components in the optical conductivity spectra down to the lowest temperature of 30 K. The charge-carrier densities of the Ru-doped iridiates estimated from the Drude components are significantly smaller than the expected values estimated from the nominal Ru-doping concentrations. Herein, we provide temperature- and doping-dependent electronic structure evolution of Ru-doped iridiates. We expect that our results will be useful for understanding the intriguing Ru-doping-dependent properties of 5$d$ iridiate Sr$_2$IrO$_{4}$.
△ Less
Submitted 2 October, 2021;
originally announced October 2021.
-
Emergent interlayer magnetic order via strain-induced orthorhombic distortion in the 5d Mott insulator Sr2IrO4
Authors:
S. Shrestha,
M. Krautloher,
M. Zhu,
J. Kim,
J. Hwang,
J. Kim,
J. -W. Kim,
B. Keimer,
A. Seo
Abstract:
We report a La2CuO4-like interlayer antiferromagnetic order in Sr2IrO4 films with large orthorhombic distortion (> 1.5%). The biaxial lattice strain in epitaxial heterostructures of Sr2IrO4/Ca3Ru2O7 lowers the crystal symmetry of Sr2IrO4 from tetragonal (C4) to orthorhombic (C2), guiding the Ir 5d Jeff = 1/2 pseudospin moment parallel to the elongated b-axis via magnetic anisotropy. From resonant…
▽ More
We report a La2CuO4-like interlayer antiferromagnetic order in Sr2IrO4 films with large orthorhombic distortion (> 1.5%). The biaxial lattice strain in epitaxial heterostructures of Sr2IrO4/Ca3Ru2O7 lowers the crystal symmetry of Sr2IrO4 from tetragonal (C4) to orthorhombic (C2), guiding the Ir 5d Jeff = 1/2 pseudospin moment parallel to the elongated b-axis via magnetic anisotropy. From resonant X-ray scattering experiments, we observed an antiferromagnetic order in the orthorhombic Sr2IrO4 film whose interlayer stacking pattern is inverted from that of the tetragonal Sr2IrO4 crystal. This interlayer stacking is similar to that of the orthorhombic La2CuO4, implying that the asymmetric interlayer exchange interaction along a and b-directions exceeds the anisotropic interlayer pseudo-dipolar interaction. Our result suggests that strain-induced distortion can provide a delicate knob for tuning the long-range magnetic order in quasi-two-dimensional systems by evoking the competition between the interlayer exchange coupling and the pseudo-dipolar interaction.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Defect engineering of magnetic ground state in EuTiO$_3$ epitaxial thin films
Authors:
Dongwon Shin,
Inseo Kim,
Sehwan Song,
Yu-Seong Seo,
Jungseek Hwang,
Sungkyun Park,
Minseok Choi,
Woo Seok Choi
Abstract:
Atomistic defect engineering through the pulsed laser epitaxy of perovskite transition metal oxides offers facile control of their emergent opto-electromagnetic and energy properties. Among the various perovskite oxides, EuTiO3 exhibits a strong coupling between the lattice, electronic, and magnetic degrees of freedom. This coupling is highly susceptible to atomistic defects. In this study, we inv…
▽ More
Atomistic defect engineering through the pulsed laser epitaxy of perovskite transition metal oxides offers facile control of their emergent opto-electromagnetic and energy properties. Among the various perovskite oxides, EuTiO3 exhibits a strong coupling between the lattice, electronic, and magnetic degrees of freedom. This coupling is highly susceptible to atomistic defects. In this study, we investigated the magnetic phase of EuTiO$_3$ epitaxial thin films via systematic defect engineering. A magnetic phase transition from an antiferromagnet to a ferromagnet was observed when the unit cell volume of EuTiO3 expanded due to the introduction of Eu-O vacancies. Optical spectroscopy and density functional theory calculations show that the change in the electronic structure as the ferromagnetic phase emerges can be attributed to the weakened Eu-Ti-Eu super-exchange interaction and the developed ferromagnetic Eu-O-Eu interaction. Facile defect engineering in EuTiO$_3$ thin films facilitates understanding and tailoring of their magnetic ground state.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Epitaxial stabilization of metastable 3C BaRuO3 thin film with ferromagnetic non-Fermi liquid phase
Authors:
Sang A Lee,
Jong Mok Ok,
Jegon Lee,
Jae-Yeol Hwang,
Sangmon Yoon,
Se-Jeong Park,
Sehwan Song,
Jong-Seong Bae,
Sungkyun Park,
Ho Nyung Lee,
Woo Seok Choi
Abstract:
Thin films of perovskite Ruthenates of the general formula ARuO3 (A = Ca and Sr) are versatile electrical conductors for viable oxide electronics. They are also scientifically intriguing, as they exhibit non-trivial electromagnetic ground states depending on the A-site element. Among them, realization of the cubic perovskite (3C) BaRuO3 thin film has been a challenge so far, because the 3C phase i…
▽ More
Thin films of perovskite Ruthenates of the general formula ARuO3 (A = Ca and Sr) are versatile electrical conductors for viable oxide electronics. They are also scientifically intriguing, as they exhibit non-trivial electromagnetic ground states depending on the A-site element. Among them, realization of the cubic perovskite (3C) BaRuO3 thin film has been a challenge so far, because the 3C phase is metastable with the largest formation energy among the various polymorph phases of BaRuO3. In this study, we successfully prepared 3C BaRuO3 thin films employing epitaxial stabilization. The 3C BaRuO3 thin films show itinerant ferromagnetism with a transition temperature of ~48 K and a non-Fermi liquid phase. The epitaxial stabilization of the 3C BaRuO3 further enabled us to make a standard comparison of perovskite Ruthenates thin films, thereby establishing the importance of the Ru-O orbital hybridization in understanding the itinerant magnetic system.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Color of Copper/Copper oxide
Authors:
Su Jae Kim,
Seonghoon Kim,
Jegon Lee,
Youngjae Jo,
Yu-Seong Seo,
Myounghoon Lee,
Yousil Lee,
Chae Ryong Cho,
Jong-pil Kim,
Miyeon Cheon,
Jungseek Hwang,
Yong In Kim,
Young-Hoon Kim,
Young-Min Kim,
Aloysius Soon,
Myunghwan Choi,
Woo Seok Choi,
Se-Young Jeong,
Young Hee Lee
Abstract:
Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer t…
▽ More
Stochastic inhomogeneous oxidation is an inherent characteristic of copper (Cu), often hindering color tuning and bandgap engineering of oxides. Coherent control of the interface between metal and metal oxide remains unresolved. We demonstrate coherent propagation of an oxidation front in single-crystal Cu thin film to achieve a full-color spectrum for Cu by precisely controlling its oxide-layer thickness. Grain boundary-free and atomically flat films prepared by atomic-sputtering epitaxy allow tailoring of the oxide layer with an abrupt interface via heat treatment with a suppressed temperature gradient. Color tuning of nearly full-color RGB indices is realized by precise control of oxide-layer thickness; our samples covered ~50.4% of the sRGB color space. The color of copper/copper oxide is realized by the reconstruction of the quantitative yield color from oxide pigment (complex dielectric functions of Cu2O) and light-layer interference (reflectance spectra obtained from the Fresnel equations) to produce structural color. We further demonstrate laser-oxide lithography with micron-scale linewidth and depth through local phase transformation to oxides embedded in the metal, providing spacing necessary for semiconducting transport and optoelectronics functionality.
△ Less
Submitted 15 July, 2021;
originally announced July 2021.
-
Identification of Collapsed Carbon Nanotubes in High-Strength Fibres Spun from Compositionally Polydisperse Aerogels
Authors:
Maria Vila,
Seungki Hong,
Seunggyu Park,
Anastasiia Mikhalchan,
Bon-Cheol Ku,
Jun Yeon Hwang,
Juan J. Vilatela
Abstract:
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile prope…
▽ More
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile properties as reinforcing fibres. This work introduces cross-sectional transmission electron microscopy of FIB-milled samples as a way to univocally identify collapsed CNTs and to determine the full population of different CNTs in macroscopic fibers produced by spinning from floating catalyst chemical vapour deposition. We show that close proximity in bundles is a major driver for collapse and that CNT stoutness (number of layers/diameter), which dominates the collapse onset, is controlled by the growth promotor. Despite differences in decomposition route, different C precursors lead to similar distributions of the ratio layers/diameter. The synthesis conditions in this study give a maximum fraction of collapsed CNTs of 70$\%$ when using selenium as promotor, corresponding to an average of $0.25 layer/nm$.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Electron-boson spectral density functions of cuprates obtained from optical spectra via machine learning
Authors:
Hwiwoo Park,
Jun H. Park,
Jungseek Hwang
Abstract:
The electron-boson spectral density (or glue) function can be obtained from measured optical scattering rate by solving a generalized Allen formula, which relates the two quantities with an integral equation and is an inversion problem. Thus far, numerical approaches, such as the maximum entropy method (MEM) and the least squares fitting method, have been applied for solving the generalized Allen…
▽ More
The electron-boson spectral density (or glue) function can be obtained from measured optical scattering rate by solving a generalized Allen formula, which relates the two quantities with an integral equation and is an inversion problem. Thus far, numerical approaches, such as the maximum entropy method (MEM) and the least squares fitting method, have been applied for solving the generalized Allen formula. Here, we developed a new method to obtain the glue functions from the optical scattering rate using a machine learning approach (MLA). We found that the MLA is more robust against random noise compared with the MEM. We applied the new developed MLA to experimentally measured optical scattering rates and obtained reliable glue functions in terms of their shapes including the amplitudes. We expect that the MLA can be a useful and rapid method for solving other inversion problems, which may contain random noise.
△ Less
Submitted 13 December, 2021; v1 submitted 8 June, 2021;
originally announced June 2021.
-
Large bandgap quantum anomalous hall insulator in a designer ferromagnet-topological insulator-ferromagnet heterostructure
Authors:
Qile Li,
Chi Xuan Trang,
Weikang Wu,
Jinwoong Hwang,
Nikhil Medhekar,
Sung-Kwan Mo,
Shengyuan A. Yang,
Mark T Edmonds
Abstract:
Combining magnetism and nontrivial band topology gives rise to quantum anomalous Hall (QAH) insulators and exotic quantum phases such as the QAH effect where current flows without dissipation along quantized edge states. Inducing magnetic order in topological insulators via proximity to a magnetic material offers a promising pathway towards achieving QAH effect at high temperature for lossless tra…
▽ More
Combining magnetism and nontrivial band topology gives rise to quantum anomalous Hall (QAH) insulators and exotic quantum phases such as the QAH effect where current flows without dissipation along quantized edge states. Inducing magnetic order in topological insulators via proximity to a magnetic material offers a promising pathway towards achieving QAH effect at high temperature for lossless transport applications. One promising architecture involves a sandwich structure comprising two single layers of MnBi2Te4 (a 2D ferromagnetic insulator) with ultra-thin Bi2Te3 in the middle, and is predicted to yield a robust QAH insulator phase with a bandgap well above thermal energy at room temperature (25 meV). Here we demonstrate the growth of a 1SL MnBi2Te4 / 4QL Bi2Te3 /1SL MnBi2Te4 heterostructure via molecular beam epitaxy, and probe the electronic structure using angle resolved photoelectron spectroscopy. We observe strong hexagonally warped massive Dirac Fermions and a bandgap of 75 meV. The magnetic origin of the gap is confirmed by the observation of broken time reversal symmetry and the exchange-Rashba effect, in excellent agreement with density functional theory calculations. These findings provide insights into magnetic proximity effects in topological insulators, that will move lossless transport in topological insulators towards higher temperature.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Atomic Manipulation of In-gap States on the $β$-Bi$_2$Pd Superconductor
Authors:
Cristina Mier,
Jiyoon Hwang,
Jinkyung Kim,
Yujeong Bae,
Fuyuki Nabeshima,
Yoshinori Imai,
Atsutaka Maeda,
Nicolás Lorente,
Andreas Heinrich,
Deung-Jang Choi
Abstract:
Electronic states in the gap of a superconductor inherit intriguing many-body properties from the superconductor. Here, we create these in-gap states by manipulating Cr atomic chains on the $β$-Bi$_2$Pd superconductor. We find that the topological properties of the in-gap states can greatly vary depending on the crafted spin chain. These systems make an ideal platform for non-trivial topological p…
▽ More
Electronic states in the gap of a superconductor inherit intriguing many-body properties from the superconductor. Here, we create these in-gap states by manipulating Cr atomic chains on the $β$-Bi$_2$Pd superconductor. We find that the topological properties of the in-gap states can greatly vary depending on the crafted spin chain. These systems make an ideal platform for non-trivial topological phases because of the large atom-superconductor interactions and the existence of a large Rashba coupling at the Bi-terminated surface. We study two spin chains, one with atoms two-lattice-parameter apart and one with square-root-of-two lattice parameters. Of these, only the second one is in a topologically non-trivial phase, in correspondence with the spin interactions for this geometry.
△ Less
Submitted 6 May, 2021; v1 submitted 13 April, 2021;
originally announced April 2021.
-
Correlation effects obtained from optical spectra of Fe-pnictides using an extended Drude-Lorentz model analysis
Authors:
Seokbae Lee,
Yu-Seong Seo,
Seulki Roh,
Dongjoon Song,
Hirosh Eisaki,
Jungseek Hwang
Abstract:
We introduce an analysis model, an extended Drude-Lorentz model, and apply it to Fe-pnictide systems to extract their electron-boson spectral density functions (or correlation spectra). The extended Drude-Lorentz model consists of an extended Drude mode for describing correlated charge carriers and Lorentz modes for interband transitions. The extended Drude mode can be obtained by a reverse proces…
▽ More
We introduce an analysis model, an extended Drude-Lorentz model, and apply it to Fe-pnictide systems to extract their electron-boson spectral density functions (or correlation spectra). The extended Drude-Lorentz model consists of an extended Drude mode for describing correlated charge carriers and Lorentz modes for interband transitions. The extended Drude mode can be obtained by a reverse process starting from the electron-boson spectral density function and extending to the optical self-energy and, eventually, to the optical conductivity. Using the extended Drude-Lorentz model, we obtained the electron-boson spectral density functions of K-doped BaFe$_2$As$_2$ (Ba-122) at four different doping levels. We discuss the doping-dependent properties of the electron-boson spectral density function of K-doped Ba-122. We also can include pseudogap effects in the model using this approach. Therefore, this approach is very helpful for understanding and analyzing measured optical spectra of strongly correlation electron systems, including high-temperature superconductors (cuprates and Fe-pnictides).
△ Less
Submitted 14 August, 2023; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Tunable Kondo resonance at a pristine two-dimensional Dirac semimetal on a Kondo insulator
Authors:
Jinwoong Hwang,
Seungseok Lee,
Ji-Eun Lee,
Minhee Kang,
Hyejin Ryu,
Hyun-Jeong Joo,
Jonathan Denlinger,
Jae-Hoon Park,
Choongyu Hwang
Abstract:
Proximity of two different materials leads to an intricate coupling of quasiparticles so that an unprecedented electronic state is often realized at the interface. Here, we demonstrate a resonance-type many-body ground state in graphene, a non-magnetic two-dimensional Dirac semimetal, when grown on SmB6, a Kondo insulator, via thermal decomposition of fullerene molecules. This ground state is typi…
▽ More
Proximity of two different materials leads to an intricate coupling of quasiparticles so that an unprecedented electronic state is often realized at the interface. Here, we demonstrate a resonance-type many-body ground state in graphene, a non-magnetic two-dimensional Dirac semimetal, when grown on SmB6, a Kondo insulator, via thermal decomposition of fullerene molecules. This ground state is typically observed in three-dimensional magnetic materials with correlated electrons. Above the characteristic Kondo temperature of the substrate, the electron band structure of pristine graphene remains almost intact. As temperature decreases, however, the Dirac fermions of graphene become hybridized with the Sm 4f states. Remarkable enhancement of the hybridization and Kondo resonance is observed with further cooling and increasing charge carrier density of graphene, evidencing the Kondo screening of the Sm 4f local magnetic moment by the conduction electrons of graphene at the interface. These findings manifest the realization of the Kondo effect in graphene by the proximity of SmB6 that is tuned by temperature and charge carrier density of graphene.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Experimental determination of the valence band offsets of $ZnGeN_2$ and $ZnGe_{0.94}Ga_{0.12}N_2$ with $GaN$
Authors:
Md Rezaul Karim,
Brenton A. Noesges,
Benthara Hewage Dinushi Jayatunga,
Menglin Zhu,
Jinwoo Hwang,
Walter R. L. Lambrecht,
Leonard J. Brillson,
Kathleen Kash,
Hongping Zhao
Abstract:
A predicted type-II staggered band alignment with an approximately $1.4 eV$ valence band offset at the $ZnGeN_2/GaN$ heterointerface has inspired novel band-engineered $III-N/ZnGeN_2$ heterostructure-based device designs for applications in high performance optoelectronics. We report on the determination of the valence band offset between metalorganic chemical vapor deposition grown…
▽ More
A predicted type-II staggered band alignment with an approximately $1.4 eV$ valence band offset at the $ZnGeN_2/GaN$ heterointerface has inspired novel band-engineered $III-N/ZnGeN_2$ heterostructure-based device designs for applications in high performance optoelectronics. We report on the determination of the valence band offset between metalorganic chemical vapor deposition grown $(ZnGe)_{1-x}Ga_{2x}N_2$, for $x = 0$ and $0.06$, and $GaN$ using X-ray photoemission spectroscopy. The valence band of $ZnGeN_2$ was found to lie $1.45-1.65 eV$ above that of $GaN$. This result agrees well with the value predicted by first-principles density functional theory calculations using the local density approximation for the potential profile and quasiparticle self-consistent GW calculations of the band edge states relative to the potential. For $(ZnGe)_{0.94}Ga_{0.12}N_2$ the value was determined to be $1.29 eV$, $~10-20\%$ lower than that of $ZnGeN_2$. The experimental determination of the large band offset between $ZnGeN_2$ and $GaN$ provides promising alternative solutions to address challenges faced with pure III-nitride-based structures and devices.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.