-
Observation of a possible diluted ferromagnetism above room temperature in cobalt-substituted LaTa(O,N)3-d
Authors:
Cora Bubeck,
Eberhard Goering,
Robert Lawitzki,
Kathrin Küster,
Wilfried Sigle,
Marc Widenmeyer,
Ulrich Starke,
Clemens Ritter,
Gabriel J. Cuello,
Peter Nagel,
Michael Merz,
Stefan Schuppler,
Gisela Schütz,
Anke Weidenkaff
Abstract:
Since 2000, the intensive effort in materials research to develop a diluted magnetic semiconductor exhibiting high-temperature (HT) ferromagnetism above room temperature was not successful. Here, the possible first bulk diluted HT-ferromagnetic non-metallic materials, based on the perovskite-type oxynitrides LaTa1-xCox(O,N)3-d (x = 0.01, 0.03, 0.05) are realized. The Curie temperature of the synth…
▽ More
Since 2000, the intensive effort in materials research to develop a diluted magnetic semiconductor exhibiting high-temperature (HT) ferromagnetism above room temperature was not successful. Here, the possible first bulk diluted HT-ferromagnetic non-metallic materials, based on the perovskite-type oxynitrides LaTa1-xCox(O,N)3-d (x = 0.01, 0.03, 0.05) are realized. The Curie temperature of the synthesized powders exceeds 600 K and the sample magnetizations are large enough to be directly attracted by permanent magnets. Cobalt clusters as a possible source for the observed HT-ferromagnetism can be excluded, since all applied characterization methods verify phase purity. Applied conventional and element-specific magnetometry imply ferromagnetic intermediate spin (IS) Co3+ which is included in a ferromagnetic host matrix. This indicates a complex magnetic interplay between the existing crystal structure, the observed anionic vacancies, and the introduced cobalt ions. These results lay the foundation for the experimental investigation and design of further diluted HT-ferromagnetic semiconductors.
△ Less
Submitted 5 August, 2022; v1 submitted 31 March, 2020;
originally announced March 2020.
-
Nanostructured clathrates and clathrate-based nanocomposites
Authors:
R. Christian,
M. Ikeda,
G. Lientschnig,
L. Prochaska,
A. Prokofiev,
P. Tomeš,
X. Yan,
A. Zolriasatein,
J. Bernardi,
T. Schachinger,
S. Schwarz,
A. Steiger-Thirsfeld,
P. Rogl,
S. Populoh,
A. Weidenkaff,
S. Paschen
Abstract:
Intermetallic clathrates are candidate materials for thermoelectric applications above room temperature. Here we explore whether their intrinsically low lattice thermal conductivities can be further reduced by nanostructuring and whether this can further enhance their thermoelectric performance.}{As bulk nanostructuring routes we studied melt spinning and ball milling. To optimize the compaction p…
▽ More
Intermetallic clathrates are candidate materials for thermoelectric applications above room temperature. Here we explore whether their intrinsically low lattice thermal conductivities can be further reduced by nanostructuring and whether this can further enhance their thermoelectric performance.}{As bulk nanostructuring routes we studied melt spinning and ball milling. To optimize the compaction process and/or stabilize the nanostructure we varied the process parameters, used additives, and studied clathrate-based composites. Initial results on clathate nanowires as simpler model nanostructures are also presented.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Thermopower enhancement from engineering the Na$_{0.7}$CoO$_2$ interacting fermiology via Fe doping
Authors:
Raphael Richter,
Denitsa Shopova,
Wenjie Xie,
Anke Weidenkaff,
Frank Lechermann
Abstract:
The sodium cobaltate system Na$_{x}$CoO$_2$ is a prominent representant of strongly correlated materials with promising thermoelectric response. In a combined theoretical and experimental study we show that by doping the Co site of the compound at $x$=0.7 with iron, a further increase of the Seebeck coefficient is achieved. The Fe defects give rise to effective hole doping in the high-thermopower…
▽ More
The sodium cobaltate system Na$_{x}$CoO$_2$ is a prominent representant of strongly correlated materials with promising thermoelectric response. In a combined theoretical and experimental study we show that by doping the Co site of the compound at $x$=0.7 with iron, a further increase of the Seebeck coefficient is achieved. The Fe defects give rise to effective hole doping in the high-thermopower region of larger sodium content $x$. Originally filled hole pockets in the angular-resolved spectral function of the Fe-free material shift to low energy when introducing Fe, leading to a multi-sheet interacting Fermi surface. Because of the higher sensitivity of correlated materials to doping, introducing adequate substitutional defects is thus a promising route to manipulate their thermopower.
△ Less
Submitted 22 September, 2016; v1 submitted 18 January, 2016;
originally announced January 2016.
-
Significant ZT Enhancement in p-type Ti(Co,Fe)Sb-InSb Nanocomposites via a Synergistic High Mobility Electron Injection Energy filtering and Boundary Scattering Approach
Authors:
Wenjie Xie,
Yonggao Yana,
Song Zhuc,
Menghan Zhouc,
Sascha Populohb,
Krzysztof Gałązkab,
S. Joseph Poon,
Anke Weidenkaff,
Jian He,
Xinfeng Tanga,
Terry M. Tritt
Abstract:
It has been demonstrated that InSb nanoinclusions, which are formed in situ, can simultaneously improve all three individual thermoelectric properties of the n-type half Heusler compound (Ti,Zr,Hf)(Co,Ni)Sb [Xie et al., Acta Mater. 58, 4795 (2010)]. In the work presented herein, we have adopted the same approach to the p-type half Heusler compound Ti(Co,Fe)Sb. The results of resistivity, Seebeck c…
▽ More
It has been demonstrated that InSb nanoinclusions, which are formed in situ, can simultaneously improve all three individual thermoelectric properties of the n-type half Heusler compound (Ti,Zr,Hf)(Co,Ni)Sb [Xie et al., Acta Mater. 58, 4795 (2010)]. In the work presented herein, we have adopted the same approach to the p-type half Heusler compound Ti(Co,Fe)Sb. The results of resistivity, Seebeck coefficient, thermal conductivity, and Hall coefficient measurements indicate that the combined high mobility electron injection, low energy electron filtering, and boundary scattering, again, lead to a simultaneous improvement of all three individual thermoelectric properties: enhanced Seebeck coefficient and electrical conductivity as well as reduced lattice thermal conductivity. A figure of merit of ZT=0.33 was attained at 900 K for the sample containing 1 atomic percent InSb nanoinclusions, a 450 percent improvement over the nanoinclusion-free sample. This represents a rare case that the same nanostructuring approach successfully works for both p-type and n-type thermoelectric materials of the same class, hence pointing to a promising materials design route for higher performance half-Heusler materials in the future and hopefully will realize similar improvement in TE devices based on such half Heusler alloys.
△ Less
Submitted 8 July, 2013;
originally announced July 2013.
-
Recent Advances in Nanostructured Thermoelectric Half-Heusler Compounds
Authors:
Wenjie Xie,
Anke Weidenkaff,
Xinfeng Tang,
Qingjie Zhang,
Joseph Poon,
Terry M. Tritt
Abstract:
Half-Heusler (HH) alloys have attracted considerable interest as promising thermoelectric (TE) materials in the temperature range around 700 K and above, which is close to the temperature range of most industrial waste heat sources. The past few years have seen nanostructuing play an important role in significantly enhancing the TE performance of several HH alloys. In this article, we briefly revi…
▽ More
Half-Heusler (HH) alloys have attracted considerable interest as promising thermoelectric (TE) materials in the temperature range around 700 K and above, which is close to the temperature range of most industrial waste heat sources. The past few years have seen nanostructuing play an important role in significantly enhancing the TE performance of several HH alloys. In this article, we briefly review the recent progress and advances in these HH nanocomposites. We begin by presenting the structure of HH alloys and the different strategies that have been utilized for improving the TE properties of HH alloys. Next, we review the details of HH nanocomposites as obtained by different techniques. Finally, the review closes by highlighting several promising strategies for further research directions in these very promising TE materials.
△ Less
Submitted 8 July, 2013;
originally announced July 2013.
-
Emergence of a Dynamic Super-Structural Order Integrating Antiferroelectric and Antiferrodistortive Competing Instabilities in EuTiO3
Authors:
Jong-Woo Kim,
Paul Thompson,
Simon Brown,
Peter S. Normile,
John A. Schlueter,
Andrey Shkabko,
Anke Weidenkaff,
Philip J. Ryan
Abstract:
Microscopic structural instabilities of EuTiO3 single crystal were investigated by synchrotron x-ray diffraction. Antiferrodistortive (AFD) oxygen octahedral rotational order was observed alongside Ti derived antiferroelectric (AFE) distortions. The competition between the two instabilities is reconciled through a cooperatively modulated structure allowing both to coexist. The electric and magneti…
▽ More
Microscopic structural instabilities of EuTiO3 single crystal were investigated by synchrotron x-ray diffraction. Antiferrodistortive (AFD) oxygen octahedral rotational order was observed alongside Ti derived antiferroelectric (AFE) distortions. The competition between the two instabilities is reconciled through a cooperatively modulated structure allowing both to coexist. The electric and magnetic field effect on the modulated AFD order shows that the origin of large magnetoelectric coupling is based upon the dynamic equilibrium between the AFD - antiferromagnetic interactions versus the electric polarization - ferromagnetic interactions.
△ Less
Submitted 23 June, 2012;
originally announced June 2012.
-
Antiferrodistortive phase transition in EuTiO3
Authors:
V. Goian,
S. Kamba,
O. Pacherova,
J. Drahokoupil,
L. Palatinus,
M. Dusek,
J. Rohlicek,
M. Savinov,
F. Laufek,
W. Schranz,
A. Fuith,
M. Kachlik,
K. Maca,
A. Shkabko,
L. Sagarna,
A. Weidenkaff,
A. A. Belik
Abstract:
X-ray diffraction, dynamical mechanical analysis and infrared reflectivity studies revealed an antiferrodistortive phase transition in EuTiO3 ceramics. Near 300K the perovskite structure changes from cubic Pm-3m to tetragonal I4/mcm due to antiphase tilting of oxygen octahedra along the c axis (a0a0c- in Glazer notation). The phase transition is analogous to SrTiO3. However, some ceramics as well…
▽ More
X-ray diffraction, dynamical mechanical analysis and infrared reflectivity studies revealed an antiferrodistortive phase transition in EuTiO3 ceramics. Near 300K the perovskite structure changes from cubic Pm-3m to tetragonal I4/mcm due to antiphase tilting of oxygen octahedra along the c axis (a0a0c- in Glazer notation). The phase transition is analogous to SrTiO3. However, some ceramics as well as single crystals of EuTiO3 show different infrared reflectivity spectra bringing evidence of a different crystal structure. In such samples electron diffraction revealed an incommensurate tetragonal structure with modulation wavevector q ~ 0.38 a*. Extra phonons in samples with modulated structure are activated in the IR spectra due to folding of the Brillouin zone. We propose that defects like Eu3+ and oxygen vacancies strongly influence the temperature of the phase transition to antiferrodistortive phase as well as the tendency to incommensurate modulation in EuTiO3.
△ Less
Submitted 10 August, 2012; v1 submitted 19 June, 2012;
originally announced June 2012.
-
Seebeck coefficients of half-metallic ferromagnets
Authors:
Benjamin Balke,
Siham Ouardi,
Tanja Graf,
Joachim Barth,
Christian G. F. Blum,
Gerhard H Fecher,
Andrey Shkabko,
Anke Weidenkaff,
Claudia Felser
Abstract:
In this report the Co2 based Heusler compounds are discussed as potential materials for spin voltage generation. The compounds were synthesized by arcmelting and consequent annealing. Band structure calculations were performed and revealed the compounds to be half-metallic ferromagnets. Magnetometry was performed on the samples and the Curie temperatures and the magnetic moments were determined.…
▽ More
In this report the Co2 based Heusler compounds are discussed as potential materials for spin voltage generation. The compounds were synthesized by arcmelting and consequent annealing. Band structure calculations were performed and revealed the compounds to be half-metallic ferromagnets. Magnetometry was performed on the samples and the Curie temperatures and the magnetic moments were determined. The Seebeck coefficients were measured from low to ambient temperatures for all compounds. For selected compounds high temperature measurements up to 900 K were performed.
△ Less
Submitted 3 November, 2009;
originally announced November 2009.
-
Anomalous transport properties of the halfmetallic ferromagnets Co2TiSi, Co2TiGe, and Co2TiSn
Authors:
Joachim Barth,
Gerhard H. Fecher,
Benjamin Balke,
Tanja Graf,
Claudia Felser,
Andrey Shkabko,
Anke Weidenkaff
Abstract:
In this work the theoretical and experimental investigations of Co2TiZ (Z = Si, Ge, or Sn) compounds are reported. Half-metallic ferromagnetism is predicted for all three compounds with only two bands crossing the Fermi energy in the majority channel. The magnetic moments fulfill the Slater-Pauling rule and the Curie temperatures are well above room temperature. All compounds show a metallic lik…
▽ More
In this work the theoretical and experimental investigations of Co2TiZ (Z = Si, Ge, or Sn) compounds are reported. Half-metallic ferromagnetism is predicted for all three compounds with only two bands crossing the Fermi energy in the majority channel. The magnetic moments fulfill the Slater-Pauling rule and the Curie temperatures are well above room temperature. All compounds show a metallic like resistivity for low temperatures up to their Curie temperature, above the resistivity changes to semiconducting like behavior. A large negative magnetoresistance of 55% is observed for Co2TiSn at room temperature in an applied magnetic field of 4T which is comparable to the large negative magnetoresistances of the manganites. The Seebeck coefficients are negative for all three compounds and reach their maximum values at their respective Curie temperatures and stay almost constant up to 950 K. The highest value achieved is -52muV/K m for Co2TiSn which is large for a metal. The combination of half-metallicity and the constant large Seebeck coefficient over a wide temperature range makes these compounds interesting materials for thermoelectric applications and further spincaloric investigations.
△ Less
Submitted 21 July, 2009;
originally announced July 2009.
