Showing 1–50 of 120 results for author: Bose, P

On $k$-planar Graphs without Short Cycles

Authors: Michael A. Bekos, Prosenjit Bose, Aaron Büngener, Vida Dujmović, Michael Hoffmann, Michael Kaufmann, Pat Morin, Saeed Odak, Alexandra Weinberger

Abstract: We study the impact of forbidding short cycles to the edge density of $k$-planar graphs; a $k$-planar graph is one that can be drawn in the plane with at most $k$ crossings per edge. Specifically, we consider three settings, according to which the forbidden substructures are $3$-cycles, $4$-cycles or both of them (i.e., girth $\ge 5$). For all three settings and all $k\in\{1,2,3\}$, we present low… ▽ More We study the impact of forbidding short cycles to the edge density of $k$-planar graphs; a $k$-planar graph is one that can be drawn in the plane with at most $k$ crossings per edge. Specifically, we consider three settings, according to which the forbidden substructures are $3$-cycles, $4$-cycles or both of them (i.e., girth $\ge 5$). For all three settings and all $k\in\{1,2,3\}$, we present lower and upper bounds on the maximum number of edges in any $k$-planar graph on $n$ vertices. Our bounds are of the form $c\,n$, for some explicit constant $c$ that depends on $k$ and on the setting. For general $k \geq 4$ our bounds are of the form $c\sqrt{k}n$, for some explicit constant $c$. These results are obtained by leveraging different techniques, such as the discharging method, the recently introduced density formula for non-planar graphs, and new upper bounds for the crossing number of $2$-- and $3$-planar graphs in combination with corresponding lower bounds based on the Crossing Lemma. △ Less

Submitted 28 August, 2024; originally announced August 2024.

Comments: Appears in the Proceedings of the 32nd International Symposium on Graph Drawing and Network Visualization (GD 2024)

Towards Generalized On-Chip Communication for Programmable Accelerators in Heterogeneous Architectures

Authors: Joseph Zuckerman, John-David Wellman, Ajay Vanamali, Manish Shankar, Gabriele Tombesi, Karthik Swaminathan, Kevin Lee, Mohit Kapur, Robert Philhower, Pradip Bose, Luca P. Carloni

Abstract: We present several enhancements to the open-source ESP platform to support flexible and efficient on-chip communication for programmable accelerators in heterogeneous SoCs. These enhancements include 1) a flexible point-to-point communication mechanism between accelerators, 2) a multicast NoC that supports data forwarding to multiple accelerators simultaneously, 3) accelerator synchronization leve… ▽ More We present several enhancements to the open-source ESP platform to support flexible and efficient on-chip communication for programmable accelerators in heterogeneous SoCs. These enhancements include 1) a flexible point-to-point communication mechanism between accelerators, 2) a multicast NoC that supports data forwarding to multiple accelerators simultaneously, 3) accelerator synchronization leveraging the SoC's coherence protocol, 4) an accelerator interface that offers fine-grained control over the communication mode used, and 5) an example ISA extension to support our enhancements. Our solution adds negligible area to the SoC architecture and requires minimal changes to the accelerators themselves. We have validated most of these features in complex FPGA prototypes and plan to include them in the open-source release of ESP in the coming months. △ Less

Submitted 4 July, 2024; originally announced July 2024.

Comments: Appeared in the Sixth International Workshop on Domain Specific System Architecture (DOSSA-6)

A Parameterized Algorithm for Vertex and Edge Connectivity of Embedded Graphs

Authors: Therese Biedl, Prosenjit Bose, Karthik Murali

Abstract: The problem of computing vertex and edge connectivity of a graph are classical problems in algorithmic graph theory. The focus of this paper is on computing these parameters on embedded graphs. A typical example of an embedded graph is a planar graph which can be drawn with no edge crossings. It has long been known that vertex and edge connectivity of planar embedded graphs can be computed in line… ▽ More The problem of computing vertex and edge connectivity of a graph are classical problems in algorithmic graph theory. The focus of this paper is on computing these parameters on embedded graphs. A typical example of an embedded graph is a planar graph which can be drawn with no edge crossings. It has long been known that vertex and edge connectivity of planar embedded graphs can be computed in linear time. Very recently, Biedl and Murali extended the techniques from planar graphs to 1-plane graphs without $\times$-crossings, i.e., crossings whose endpoints induce a matching. While the tools used were novel, they were highly tailored to 1-plane graphs, and do not provide much leeway for further extension. In this paper, we develop alternate techniques that are simpler, have wider applications to near-planar graphs, and can be used to test both vertex and edge connectivity. Our technique works for all those embedded graphs where any pair of crossing edges are connected by a path that, roughly speaking, can be covered with few cells of the drawing. Important examples of such graphs include optimal 2-planar and optimal 3-planar graphs, $d$-map graphs, $d$-framed graphs, graphs with bounded crossing number, and $k$-plane graphs with bounded number of $\times$-crossings. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Approximating shortest paths in weighted square and hexagonal meshes

Authors: Prosenjit Bose, Guillermo Esteban, David Orden, Rodrigo I. Silveira

Abstract: Continuous 2-dimensional space is often discretized by considering a mesh of weighted cells. In this work we study how well a weighted mesh approximates the space, with respect to shortest paths. We consider a shortest path $ \mathit{SP_w}(s,t) $ from $ s $ to $ t $ in the continuous 2-dimensional space, a shortest vertex path $ \mathit{SVP_w}(s,t) $ (or any-angle path), which is a shortest path w… ▽ More Continuous 2-dimensional space is often discretized by considering a mesh of weighted cells. In this work we study how well a weighted mesh approximates the space, with respect to shortest paths. We consider a shortest path $ \mathit{SP_w}(s,t) $ from $ s $ to $ t $ in the continuous 2-dimensional space, a shortest vertex path $ \mathit{SVP_w}(s,t) $ (or any-angle path), which is a shortest path where the vertices of the path are vertices of the mesh, and a shortest grid path $ \mathit{SGP_w}(s,t) $, which is a shortest path in a graph associated to the weighted mesh. We provide upper and lower bounds on the ratios $ \frac{\lVert \mathit{SGP_w}(s,t)\rVert}{\lVert \mathit{SP_w}(s,t)\rVert} $, $ \frac{\lVert \mathit{SVP_w}(s,t)\rVert}{\lVert \mathit{SP_w}(s,t)\rVert} $, $ \frac{\lVert \mathit{SGP_w}(s,t)\rVert}{\lVert \mathit{SVP_w}(s,t)\rVert} $ in square and hexagonal meshes, extending previous results for triangular grids. These ratios determine the effectiveness of existing algorithms that compute shortest paths on the graphs obtained from the grids. Our main results are that the ratio $ \frac{\lVert \mathit{SGP_w}(s,t)\rVert}{\lVert \mathit{SP_w}(s,t)\rVert} $ is at most $ \frac{2}{\sqrt{2+\sqrt{2}}} \approx 1.08 $ and $ \frac{2}{\sqrt{2+\sqrt{3}}} \approx 1.04 $ in a square and a hexagonal mesh, respectively. △ Less

Submitted 11 April, 2024; originally announced April 2024.

DADIT: A Dataset for Demographic Classification of Italian Twitter Users and a Comparison of Prediction Methods

Authors: Lorenzo Lupo, Paul Bose, Mahyar Habibi, Dirk Hovy, Carlo Schwarz

Abstract: Social scientists increasingly use demographically stratified social media data to study the attitudes, beliefs, and behavior of the general public. To facilitate such analyses, we construct, validate, and release publicly the representative DADIT dataset of 30M tweets of 20k Italian Twitter users, along with their bios and profile pictures. We enrich the user data with high-quality labels for gen… ▽ More Social scientists increasingly use demographically stratified social media data to study the attitudes, beliefs, and behavior of the general public. To facilitate such analyses, we construct, validate, and release publicly the representative DADIT dataset of 30M tweets of 20k Italian Twitter users, along with their bios and profile pictures. We enrich the user data with high-quality labels for gender, age, and location. DADIT enables us to train and compare the performance of various state-of-the-art models for the prediction of the gender and age of social media users. In particular, we investigate if tweets contain valuable information for the task, since popular classifiers like M3 don't leverage them. Our best XLM-based classifier improves upon the commonly used competitor M3 by up to 53% F1. Especially for age prediction, classifiers profit from including tweets as features. We also confirm these findings on a German test set. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Comments: Accepted to LREC-COLING 2024

Approximating the Smallest $k$-Enclosing Geodesic Disc in a Simple Polygon

Authors: Prosenjit Bose, Anthony D'Angelo, Stephane Durocher

Abstract: We consider the problem of finding a geodesic disc of smallest radius containing at least $k$ points from a set of $n$ points in a simple polygon that has $m$ vertices, $r$ of which are reflex vertices. We refer to such a disc as a SKEG disc. We present an algorithm to compute a SKEG disc using higher-order geodesic Voronoi diagrams with worst-case time… ▽ More We consider the problem of finding a geodesic disc of smallest radius containing at least $k$ points from a set of $n$ points in a simple polygon that has $m$ vertices, $r$ of which are reflex vertices. We refer to such a disc as a SKEG disc. We present an algorithm to compute a SKEG disc using higher-order geodesic Voronoi diagrams with worst-case time $O(k^{2} n + k^{2} r + \min(kr, r(n-k)) + m)$ ignoring polylogarithmic factors. We then present two $2$-approximation algorithms that find a geodesic disc containing at least $k$ points whose radius is at most twice that of a SKEG disc. The first algorithm computes a $2$-approximation with high probability in $O((n^{2} / k) \log n \log r + m)$ worst-case time with $O(n + m)$ space. The second algorithm runs in $O(n \log^{2} n \log r + m)$ expected time using $O(n + m)$ expected space, independent of $k$. Note that the first algorithm is faster when $k \in ω(n / \log n)$. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Comments: 51 pages (27 main content, 4 of references, then appendices), 10 figures (2 of which have 2 subfigures), preliminary version in WADS vol. 14079 of LNCS, pgs. 179 - 192, Springer, 2023

Routing on Heavy Path WSPD Spanners

Authors: Prosenjit Bose, Tyler Tuttle

Abstract: In this article, we present a construction of a spanner on a set of $n$ points in $\mathbf{R}^d$ that we call a heavy path WSPD spanner. The construction is parameterized by a constant $s > 2$ called the separation ratio. The size of the graph is $O(s^dn)$ and the spanning ratio is at most $1 + 2/s + 2/(s - 1)$. We also show that this graph has a hop spanning ratio of at most $2\lg n + 1$. We pr… ▽ More In this article, we present a construction of a spanner on a set of $n$ points in $\mathbf{R}^d$ that we call a heavy path WSPD spanner. The construction is parameterized by a constant $s > 2$ called the separation ratio. The size of the graph is $O(s^dn)$ and the spanning ratio is at most $1 + 2/s + 2/(s - 1)$. We also show that this graph has a hop spanning ratio of at most $2\lg n + 1$. We present a memoryless local routing algorithm for heavy path WSPD spanners. The routing algorithm requires a vertex $v$ of the graph to store $O(\mathrm{deg}(v)\log n)$ bits of information, where $\mathrm{deg}(v)$ is the degree of $v$. The routing ratio is at most $1 + 4/s + 1/(s - 1)$ and at least $1 + 4/s$ in the worst case. The number of edges on the routing path is bounded by $2\lg n + 1$. We then show that the heavy path WSPD spanner can be constructed in metric spaces of bounded doubling dimension. These metric spaces have been studied in computational geometry as a generalization of Euclidean space. We show that, in a metric space with doubling dimension $λ$, the heavy path WSPD spanner has size $O(s^λn)$ where $s$ is the separation ratio. The spanning ratio and hop spanning ratio are the same as in the Euclidean case. Finally, we show that the local routing algorithm works in the bounded doubling dimension case. The vertices require the same amount of storage, but the routing ratio becomes at most $1 + (2 + \fracτ{τ-1})/s + 1/(s - 1)$ in the worst case, where $τ\ge 11$ is a constant related to the doubling dimension. △ Less

Submitted 22 December, 2023; originally announced December 2023.

The Exact Spanning Ratio of the Parallelogram Delaunay Graph

Authors: Prosenjit Bose, Jean-Lou De Carufel, Sandrine Njoo

Abstract: Finding the exact spanning ratio of a Delaunay graph has been one of the longstanding open problems in Computational Geometry. Currently there are only four convex shapes for which the exact spanning ratio of their Delaunay graph is known: the equilateral triangle, the square, the regular hexagon and the rectangle. In this paper, we show the exact spanning ratio of the parallelogram Delaunay graph… ▽ More Finding the exact spanning ratio of a Delaunay graph has been one of the longstanding open problems in Computational Geometry. Currently there are only four convex shapes for which the exact spanning ratio of their Delaunay graph is known: the equilateral triangle, the square, the regular hexagon and the rectangle. In this paper, we show the exact spanning ratio of the parallelogram Delaunay graph, making the parallelogram the fifth convex shape for which an exact bound is known. The worst-case spanning ratio is exactly $$\frac{\sqrt{2}\sqrt{1+A^2+2A\cos(θ_0)+(A+\cos(θ_0))\sqrt{1+A^2+2A\cos(θ_0)}}}{\sin(θ_0)} .$$ where $A$ is the aspect ratio and $θ_0$ is the non-obtuse angle of the parallelogram. Moreover, we show how to construct a parallelogram Delaunay graph whose spanning ratio matches the above mentioned spanning ratio. △ Less

Submitted 28 February, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

On Separating Path and Tree Systems in Graphs

Authors: Ahmad Biniaz, Prosenjit Bose, Jean-Lou De Carufel, Anil Maheshwari, Babak Miraftab, Saeed Odak, Michiel Smid, Shakhar Smorodinsky, Yelena Yuditsky

Abstract: We explore the concept of separating systems of vertex sets of graphs. A separating system of a set $X$ is a collection of subsets of $X$ such that for any pair of distinct elements in $X$, there exists a set in the separating system that contains exactly one of the two elements. A separating system of the vertex set of a graph $G$ is called a vertex-separating path (tree) system of $G$ if the ele… ▽ More We explore the concept of separating systems of vertex sets of graphs. A separating system of a set $X$ is a collection of subsets of $X$ such that for any pair of distinct elements in $X$, there exists a set in the separating system that contains exactly one of the two elements. A separating system of the vertex set of a graph $G$ is called a vertex-separating path (tree) system of $G$ if the elements of the separating system are paths (trees) in the graph $G$. In this paper, we focus on the size of the smallest vertex-separating path (tree) system for different types of graphs, including trees, grids, and maximal outerplanar graphs. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 23 page, 3 figures

Connected Dominating Sets in Triangulations

Authors: Prosenjit Bose, Vida Dujmović, Hussein Houdrouge, Pat Morin, Saeed Odak

Abstract: We show that every $n$-vertex triangulation has a connected dominating set of size at most $10n/21$. Equivalently, every $n$ vertex triangulation has a spanning tree with at least $11n/21$ leaves. Prior to the current work, the best known bounds were $n/2$, which follows from work of Albertson, Berman, Hutchinson, and Thomassen (J. Graph Theory \textbf{14}(2):247--258). One immediate consequence o… ▽ More We show that every $n$-vertex triangulation has a connected dominating set of size at most $10n/21$. Equivalently, every $n$ vertex triangulation has a spanning tree with at least $11n/21$ leaves. Prior to the current work, the best known bounds were $n/2$, which follows from work of Albertson, Berman, Hutchinson, and Thomassen (J. Graph Theory \textbf{14}(2):247--258). One immediate consequence of this result is an improved bound for the SEFENOMAP graph drawing problem of Angelini, Evans, Frati, and Gudmundsson (J. Graph Theory \textbf{82}(1):45--64). As a second application, we show that for every set $P$ of $\lceil 11n/21\rceil$ points in $\R^2$ every $n$-vertex planar graph has a one-bend non-crossing drawing in which some set of $11n/21$ vertices is drawn on the points of $P$. The main result extends to $n$-vertex triangulations of genus-$g$ surfaces, and implies that these have connected dominating sets of size at most $10n/21+O(\sqrt{gn})$. △ Less

Submitted 4 April, 2024; v1 submitted 6 December, 2023; originally announced December 2023.

Comments: Linear-time algorithm; extension to genus-o(n) surfaces; corrections to proof of Lemma 9

Exploiting Unfair Advantages: Investigating Opportunistic Trading in the NFT Market

Authors: Priyanka Bose, Dipanjan Das, Fabio Gritti, Nicola Ruaro, Christopher Kruegel, Giovanni Vigna

Abstract: As cryptocurrency evolved, new financial instruments, such as lending and borrowing protocols, currency exchanges, fungible and non-fungible tokens (NFT), staking and mining protocols have emerged. A financial ecosystem built on top of a blockchain is supposed to be fair and transparent for each participating actor. Yet, there are sophisticated actors who turn their domain knowledge and market ine… ▽ More As cryptocurrency evolved, new financial instruments, such as lending and borrowing protocols, currency exchanges, fungible and non-fungible tokens (NFT), staking and mining protocols have emerged. A financial ecosystem built on top of a blockchain is supposed to be fair and transparent for each participating actor. Yet, there are sophisticated actors who turn their domain knowledge and market inefficiencies to their strategic advantage; thus extracting value from trades not accessible to others. This situation is further exacerbated by the fact that blockchain-based markets and decentralized finance (DeFi) instruments are mostly unregulated. Though a large body of work has already studied the unfairness of different aspects of DeFi and cryptocurrency trading, the economic intricacies of non-fungible token (NFT) trades necessitate further analysis and academic scrutiny. The trading volume of NFTs has skyrocketed in recent years. A single NFT trade worth over a million US dollars, or marketplaces making billions in revenue is not uncommon nowadays. While previous research indicated the presence of wrongdoings in the NFT market, to our knowledge, we are the first to study predatory trading practices, what we call opportunistic trading, in depth. Opportunistic traders are sophisticated actors who employ automated, high-frequency NFT trading strategies, which, oftentimes, are malicious, deceptive, or, at the very least, unfair. Such attackers weaponize their advanced technical knowledge and superior understanding of DeFi protocols to disrupt trades of unsuspecting users, and collect profits from economic situations that are inaccessible to ordinary users, in a "supposedly" fair market. In this paper, we explore three such broad classes of opportunistic strategies aiming to realize three distinct trading objectives, viz., acquire, instant profit generation, and loss minimization. △ Less

Submitted 5 September, 2023; originally announced October 2023.

On the Restricted $k$-Steiner Tree Problem

Authors: Prosenjit Bose, Anthony D'Angelo, Stephane Durocher

Abstract: Given a set $P$ of $n$ points in $\mathbb{R}^2$ and an input line $γ$ in $\mathbb{R}^2$, we present an algorithm that runs in optimal $Θ(n\log n)$ time and $Θ(n)$ space to solve a restricted version of the $1$-Steiner tree problem. Our algorithm returns a minimum-weight tree interconnecting $P$ using at most one Steiner point $s \in γ$, where edges are weighted by the Euclidean distance between th… ▽ More Given a set $P$ of $n$ points in $\mathbb{R}^2$ and an input line $γ$ in $\mathbb{R}^2$, we present an algorithm that runs in optimal $Θ(n\log n)$ time and $Θ(n)$ space to solve a restricted version of the $1$-Steiner tree problem. Our algorithm returns a minimum-weight tree interconnecting $P$ using at most one Steiner point $s \in γ$, where edges are weighted by the Euclidean distance between their endpoints. We then extend the result to $j$ input lines. Following this, we show how the algorithm of Brazil et al. ("Generalised k-Steiner Tree Problems in Normed Planes", arXiv:1111.1464) that solves the $k$-Steiner tree problem in $\mathbb{R}^2$ in $O(n^{2k})$ time can be adapted to our setting. For $k>1$, restricting the (at most) $k$ Steiner points to lie on an input line, the runtime becomes $O(n^{k})$. Next we show how the results of Brazil et al. ("Generalised k-Steiner Tree Problems in Normed Planes", arXiv:1111.1464) allow us to maintain the same time and space bounds while extending to some non-Euclidean norms and different tree cost functions. Lastly, we extend the result to $j$ input curves. △ Less

Submitted 14 June, 2023; originally announced June 2023.

Comments: 31 pages (26 of content), 4 figures (last one as 3 subfigures). Minor corrections since publication: notably our analysis of the Brazil et al. k-steiner tree algorithm in section 4.1 (results unchanged), and a correction to some corollary statements to correct the space usage. Also added short discussion of how the algorithm still works when the MST of the input point set is not unique

Journal ref: J Comb Optim vol 44, issue 4, pg 2893-2918 (2022); Computing and Combinatorics. COCOON 2020. vol 12273, pg 448-459

Columbus: Android App Testing Through Systematic Callback Exploration

Authors: Priyanka Bose, Dipanjan Das, Saastha Vasan, Sebastiano Mariani, Ilya Grishchenko, Andrea Continella, Antonio Bianchi, Christopher Kruegel, Giovanni Vigna

Abstract: With the continuous rise in the popularity of Android mobile devices, automated testing of apps has become more important than ever. Android apps are event-driven programs. Unfortunately, generating all possible types of events by interacting with the app's interface is challenging for an automated testing approach. Callback-driven testing eliminates the need for event generation by directly invok… ▽ More With the continuous rise in the popularity of Android mobile devices, automated testing of apps has become more important than ever. Android apps are event-driven programs. Unfortunately, generating all possible types of events by interacting with the app's interface is challenging for an automated testing approach. Callback-driven testing eliminates the need for event generation by directly invoking app callbacks. However, existing callback-driven testing techniques assume prior knowledge of Android callbacks, and they rely on a human expert, who is familiar with the Android API, to write stub code that prepares callback arguments before invocation. Since the Android API is huge and keeps evolving, prior techniques could only support a small fraction of callbacks present in the Android framework. In this work, we introduce Columbus, a callback-driven testing technique that employs two strategies to eliminate the need for human involvement: (i) it automatically identifies callbacks by simultaneously analyzing both the Android framework and the app under test, and (ii) it uses a combination of under-constrained symbolic execution (primitive arguments), and type-guided dynamic heap introspection (object arguments) to generate valid and effective inputs. Lastly, Columbus integrates two novel feedback mechanisms -- data dependency and crash-guidance, during testing to increase the likelihood of triggering crashes, and maximizing coverage. In our evaluation, Columbus outperforms state-of-the-art model-driven, checkpoint-based, and callback-driven testing tools both in terms of crashes and coverage. △ Less

Submitted 17 February, 2023; originally announced February 2023.

Journal ref: International Conference on Software Engineering (ICSE), 2023

Unveiling the Risks of NFT Promotion Scams

Authors: Sayak Saha Roy, Dipanjan Das, Priyanka Bose, Christopher Kruegel, Giovanni Vigna, Shirin Nilizadeh

Abstract: The rapid growth in popularity and hype surrounding digital assets such as art, video, and music in the form of non-fungible tokens (NFTs) has made them a lucrative investment opportunity, with NFT-based sales surpassing $25B in 2021 alone. However, the volatility and general lack of technical understanding of the NFT ecosystem have led to the spread of various scams. The success of an NFT heavily… ▽ More The rapid growth in popularity and hype surrounding digital assets such as art, video, and music in the form of non-fungible tokens (NFTs) has made them a lucrative investment opportunity, with NFT-based sales surpassing $25B in 2021 alone. However, the volatility and general lack of technical understanding of the NFT ecosystem have led to the spread of various scams. The success of an NFT heavily depends on its online virality. As a result, creators use dedicated promotion services to drive engagement to their projects on social media websites, such as Twitter. However, these services are also utilized by scammers to promote fraudulent projects that attempt to steal users' cryptocurrency assets, thus posing a major threat to the ecosystem of NFT sales. In this paper, we conduct a longitudinal study of 439 promotion services (accounts) on Twitter that have collectively promoted 823 unique NFT projects through giveaway competitions over a period of two months. Our findings reveal that more than 36% of these projects were fraudulent, comprising of phishing, rug pull, and pre-mint scams. We also found that a majority of accounts engaging with these promotions (including those for fraudulent NFT projects) are bots that artificially inflate the popularity of the fraudulent NFT collections by increasing their likes, followers, and retweet counts. This manipulation results in significant engagement from real users, who then invest in these scams. We also identify several shortcomings in existing anti-scam measures, such as blocklists, browser protection tools, and domain hosting services, in detecting NFT-based scams. We utilized our findings to develop a machine learning classifier tool that was able to proactively detect 382 new fraudulent NFT projects on Twitter. △ Less

Submitted 11 September, 2023; v1 submitted 23 January, 2023; originally announced January 2023.

HE-PEx: Efficient Machine Learning under Homomorphic Encryption using Pruning, Permutation and Expansion

Authors: Ehud Aharoni, Moran Baruch, Pradip Bose, Alper Buyuktosunoglu, Nir Drucker, Subhankar Pal, Tomer Pelleg, Kanthi Sarpatwar, Hayim Shaul, Omri Soceanu, Roman Vaculin

Abstract: Privacy-preserving neural network (NN) inference solutions have recently gained significant traction with several solutions that provide different latency-bandwidth trade-offs. Of these, many rely on homomorphic encryption (HE), a method of performing computations over encrypted data. However, HE operations even with state-of-the-art schemes are still considerably slow compared to their plaintext… ▽ More Privacy-preserving neural network (NN) inference solutions have recently gained significant traction with several solutions that provide different latency-bandwidth trade-offs. Of these, many rely on homomorphic encryption (HE), a method of performing computations over encrypted data. However, HE operations even with state-of-the-art schemes are still considerably slow compared to their plaintext counterparts. Pruning the parameters of a NN model is a well-known approach to improving inference latency. However, pruning methods that are useful in the plaintext context may lend nearly negligible improvement in the HE case, as has also been demonstrated in recent work. In this work, we propose a novel set of pruning methods that reduce the latency and memory requirement, thus bringing the effectiveness of plaintext pruning methods to HE. Crucially, our proposal employs two key techniques, viz. permutation and expansion of the packed model weights, that enable pruning significantly more ciphertexts and recuperating most of the accuracy loss, respectively. We demonstrate the advantage of our method on fully connected layers where the weights are packed using a recently proposed packing technique called tile tensors, which allows executing deep NN inference in a non-interactive mode. We evaluate our methods on various autoencoder architectures and demonstrate that for a small mean-square reconstruction loss of 1.5*10^{-5} on MNIST, we reduce the memory requirement and latency of HE-enabled inference by 60%. △ Less

Submitted 7 July, 2022; originally announced July 2022.

Effectivity of super resolution convolutional neural network for the enhancement of land cover classification from medium resolution satellite images

Authors: Pritom Bose, Debolina Halder, Oliur Rahman, Turash Haque Pial

Abstract: In the modern world, satellite images play a key role in forest management and degradation monitoring. For a precise quantification of forest land cover changes, the availability of spatially fine resolution data is a necessity. Since 1972, NASAs LANDSAT Satellites are providing terrestrial images covering every corner of the earth, which have been proved to be a highly useful resource for terrest… ▽ More In the modern world, satellite images play a key role in forest management and degradation monitoring. For a precise quantification of forest land cover changes, the availability of spatially fine resolution data is a necessity. Since 1972, NASAs LANDSAT Satellites are providing terrestrial images covering every corner of the earth, which have been proved to be a highly useful resource for terrestrial change analysis and have been used in numerous other sectors. However, freely accessible satellite images are, generally, of medium to low resolution which is a major hindrance to the precision of the analysis. Hence, we performed a comprehensive study to prove our point that, enhancement of resolution by Super-Resolution Convolutional Neural Network (SRCNN) will lessen the chance of misclassification of pixels, even under the established recognition methods. We tested the method on original LANDSAT-7 images of different regions of Sundarbans and their upscaled versions which were produced by bilinear interpolation, bicubic interpolation, and SRCNN respectively and it was discovered that SRCNN outperforms the others by a significant amount. △ Less

Submitted 5 July, 2022; originally announced July 2022.

Comments: This manuscript was originally prepared for 38th Asian Conference on Remote Sensing, 2017

Linear versus centred chromatic numbers

Authors: Prosenjit Bose, Vida Dujmović, Hussein Houdrouge, Mehrnoosh Javarsineh, Pat Morin

Abstract: $\DeclareMathOperator{\chicen}{χ_{\mathrm{cen}}}\DeclareMathOperator{\chilin}{χ_{\mathrm{lin}}}$ A centred colouring of a graph is a vertex colouring in which every connected subgraph contains a vertex whose colour is unique and a \emph{linear colouring} is a vertex colouring in which every (not-necessarily induced) path contains a vertex whose colour is unique. For a graph $G… ▽ More $\DeclareMathOperator{\chicen}{χ_{\mathrm{cen}}}\DeclareMathOperator{\chilin}{χ_{\mathrm{lin}}}$ A centred colouring of a graph is a vertex colouring in which every connected subgraph contains a vertex whose colour is unique and a \emph{linear colouring} is a vertex colouring in which every (not-necessarily induced) path contains a vertex whose colour is unique. For a graph $G$, the centred chromatic number $\chicen(G)$ and the linear chromatic number $\chilin(G)$ denote the minimum number of distinct colours required for a centred, respectively, linear colouring of $G$. From these definitions, it follows immediately that $\chilin(G)\le \chicen(G)$ for every graph $G$. The centred chromatic number is equivalent to treedepth and has been studied extensively. Much less is known about linear colouring. Kun et al [Algorithmica 83(1)] prove that $\chicen(G) \le \tilde{O}(\chilin(G)^{190})$ for any graph $G$ and conjecture that $\chicen(G)\le 2\chilin(G)$. Their upper bound was subsequently improved by Czerwinski et al [SIDMA 35(2)] to $\chicen(G)\le\tilde{O}(\chilin(G)^{19})$. The proof of both upper bounds relies on establishing a lower bound on the linear chromatic number of pseudogrids, which appear in the proof due to their critical relationship to treewidth. Specifically, Kun et al prove that $k\times k$ pseudogrids have linear chromatic number $Ω(\sqrt{k})$. Our main contribution is establishing a tight bound on the linear chromatic number of pseudogrids, specifically $\chilin(G)\ge Ω(k)$ for every $k\times k$ pseudogrid $G$. As a consequence we improve the general bound for all graphs to $\chicen(G)\le \tilde{O}(\chilin(G)^{10})$. In addition, this tight bound gives further evidence in support of Kun et al's conjecture (above) that the centred chromatic number of any graph is upper bounded by a linear function of its linear chromatic number. △ Less

Submitted 10 April, 2024; v1 submitted 30 May, 2022; originally announced May 2022.

Comments: Minor corrections and updates

A Deep Learning Approach to Dst Index Prediction

Authors: Yasser Abduallah, Jason T. L. Wang, Prianka Bose, Genwei Zhang, Firas Gerges, Haimin Wang

Abstract: The disturbance storm time (Dst) index is an important and useful measurement in space weather research. It has been used to characterize the size and intensity of a geomagnetic storm. A negative Dst value means that the Earth's magnetic field is weakened, which happens during storms. In this paper, we present a novel deep learning method, called the Dst Transformer, to perform short-term, 1-6 hou… ▽ More The disturbance storm time (Dst) index is an important and useful measurement in space weather research. It has been used to characterize the size and intensity of a geomagnetic storm. A negative Dst value means that the Earth's magnetic field is weakened, which happens during storms. In this paper, we present a novel deep learning method, called the Dst Transformer, to perform short-term, 1-6 hour ahead, forecasting of the Dst index based on the solar wind parameters provided by the NASA Space Science Data Coordinated Archive. The Dst Transformer combines a multi-head attention layer with Bayesian inference, which is capable of quantifying both aleatoric uncertainty and epistemic uncertainty when making Dst predictions. Experimental results show that the proposed Dst Transformer outperforms related machine learning methods in terms of the root mean square error and R-squared. Furthermore, the Dst Transformer can produce both data and model uncertainty quantification results, which can not be done by the existing methods. To our knowledge, this is the first time that Bayesian deep learning has been used for Dst index forecasting. △ Less

Submitted 5 May, 2022; originally announced May 2022.

Comments: 7 pages, 4 figures

Pursuit-Evasion in Graphs: Zombies, Lazy Zombies and a Survivor

Authors: Prosenjit Bose, Jean-Lou De Carufel, Thomas Shermer

Abstract: We study zombies and survivor, a variant of the game of cops and robber on graphs. In this variant, the single survivor plays the role of the robber and attempts to escape from the zombies that play the role of the cops. The zombies are restricted, on their turn, to always follow an edge of a shortest path towards the survivor. Let $z(G)$ be the smallest number of zombies required to catch the sur… ▽ More We study zombies and survivor, a variant of the game of cops and robber on graphs. In this variant, the single survivor plays the role of the robber and attempts to escape from the zombies that play the role of the cops. The zombies are restricted, on their turn, to always follow an edge of a shortest path towards the survivor. Let $z(G)$ be the smallest number of zombies required to catch the survivor on a graph $G$ with $n$ vertices. We show that there exist outerplanar graphs and visibility graphs of simple polygons such that $z(G) = Θ(n)$. We also show that there exist maximum-degree-$3$ outerplanar graphs such that $z(G) = Ω\left(n/\log(n)\right)$. Let $z_L(G)$ be the smallest number of lazy zombies (zombies that can stay still on their turn) required to catch the survivor on a graph $G$. We establish that lazy zombies are more powerful than normal zombies but less powerful than cops. We prove that $z_L(G) = 2$ for connected outerplanar graphs. We show that $z_L(G)\leq k$ for connected graphs with treedepth $k$. This result implies that $z_L(G)$ is at most $(k+1)\log n$ for connected graphs with treewidth $k$, $O(\sqrt{n})$ for connected planar graphs, $O(\sqrt{gn})$ for connected graphs with genus $g$ and $O(h\sqrt{hn})$ for connected graphs with any excluded $h$-vertex minor. Our results on lazy zombies still hold when an adversary chooses the initial positions of the zombies. △ Less

Submitted 25 April, 2022; originally announced April 2022.

Comments: 31 pages, 22 figures

ACM Class: G.2.2; F.2.2

HetSched: Quality-of-Mission Aware Scheduling for Autonomous Vehicle SoCs

Authors: Aporva Amarnath, Subhankar Pal, Hiwot Kassa, Augusto Vega, Alper Buyuktosunoglu, Hubertus Franke, John-David Wellman, Ronald Dreslinski, Pradip Bose

Abstract: Systems-on-Chips (SoCs) that power autonomous vehicles (AVs) must meet stringent performance and safety requirements prior to deployment. With increasing complexity in AV applications, the system needs to meet these real-time demands of multiple safety-critical applications simultaneously. A typical AV-SoC is a heterogeneous multiprocessor consisting of accelerators supported by general-purpose co… ▽ More Systems-on-Chips (SoCs) that power autonomous vehicles (AVs) must meet stringent performance and safety requirements prior to deployment. With increasing complexity in AV applications, the system needs to meet these real-time demands of multiple safety-critical applications simultaneously. A typical AV-SoC is a heterogeneous multiprocessor consisting of accelerators supported by general-purpose cores. Such heterogeneity, while needed for power-performance efficiency, complicates the art of task scheduling. In this paper, we demonstrate that hardware heterogeneity impacts the scheduler's effectiveness and that optimizing for only the real-time aspect of applications is not sufficient in AVs. Therefore, a more holistic approach is required -- one that considers global Quality-of-Mission (QoM) metrics, as defined in the paper. We then propose HetSched, a multi-step scheduler that leverages dynamic runtime information about the underlying heterogeneous hardware platform, along with the applications' real-time constraints and the task traffic in the system to optimize overall mission performance. HetSched proposes two scheduling policies: MSstat and MSdyn and scheduling optimizations like task pruning, hybrid heterogeneous ranking and rank update. HetSched improves overall mission performance on average by 4.6x, 2.6x and 2.6x when compared against CPATH, ADS and 2lvl-EDF (state-of-the-art real-time schedulers built for heterogeneous systems), respectively, and achieves an average of 53.3% higher hardware utilization, while meeting 100% critical deadlines for real-world applications of autonomous vehicles. Furthermore, when used as part of an SoC design space exploration loop, in comparison to prior schedulers, HetSched reduces the number of processing elements required by an SoC to safely complete AV's missions by 35% on average while achieving 2.7x lower energy-mission time product. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Comments: 14 pages, 11 figures, 4 tables

An Optimal Algorithm for Product Structure in Planar Graphs

Authors: Prosenjit Bose, Pat Morin, Saeed Odak

Abstract: The \emph{Product Structure Theorem} for planar graphs (Dujmović et al.\ \emph{JACM}, \textbf{67}(4):22) states that any planar graph is contained in the strong product of a planar $3$-tree, a path, and a $3$-cycle. We give a simple linear-time algorithm for finding this decomposition as well as several related decompositions. This improves on the previous $O(n\log n)$ time algorithm (Morin.\ \emp… ▽ More The \emph{Product Structure Theorem} for planar graphs (Dujmović et al.\ \emph{JACM}, \textbf{67}(4):22) states that any planar graph is contained in the strong product of a planar $3$-tree, a path, and a $3$-cycle. We give a simple linear-time algorithm for finding this decomposition as well as several related decompositions. This improves on the previous $O(n\log n)$ time algorithm (Morin.\ \emph{Algorithmica}, \textbf{85}(5):1544--1558). △ Less

Submitted 17 February, 2022; originally announced February 2022.

Comments: 14 pages, 5 figures

On approximating shortest paths in weighted triangular tessellations

Authors: Prosenjit Bose, Guillermo Esteban, David Orden, Rodrigo I. Silveira

Abstract: We study the quality of weighted shortest paths when a continuous 2-dimensional space is discretized by a weighted triangular tessellation. In order to evaluate how well the tessellation approximates the 2-dimensional space, we study three types of shortest paths: a weighted shortest path~$ \mathit{SP_w}(s,t) $, which is a shortest path from $ s $ to $ t $ in the space; a weighted shortest vertex… ▽ More We study the quality of weighted shortest paths when a continuous 2-dimensional space is discretized by a weighted triangular tessellation. In order to evaluate how well the tessellation approximates the 2-dimensional space, we study three types of shortest paths: a weighted shortest path~$ \mathit{SP_w}(s,t) $, which is a shortest path from $ s $ to $ t $ in the space; a weighted shortest vertex path $ \mathit{SVP_w}(s,t) $, which is a shortest path where the vertices of the path are vertices of the tessellation; and a weighted shortest grid path~$ \mathit{SGP_w}(s,t) $, which is a shortest path whose edges are edges of the tessellation. The ratios $ \frac{\lVert \mathit{SGP_w}(s,t)\rVert}{\lVert \mathit{SP_w}(s,t)\rVert} $, $ \frac{\lVert \mathit{SVP_w}(s,t)\rVert}{\lVert \mathit{SP_w}(s,t)\rVert} $, $ \frac{\lVert \mathit{SGP_w}(s,t)\rVert}{\lVert \mathit{SVP_w}(s,t)\rVert} $ provide estimates on the quality of the approximation. Given any arbitrary weight assignment to the faces of a triangular tessellation, we prove upper and lower bounds on the estimates that are independent of the weight assignment. Our main result is that $ \frac{\lVert \mathit{SGP_w}(s,t)\rVert}{\lVert \mathit{SP_w}(s,t)\rVert} = \frac{2}{\sqrt{3}} \approx 1.15 $ in the worst case, and this is tight. △ Less

Submitted 27 November, 2021; originally announced November 2021.

Comments: 17 pages, 10 figures

Understanding Security Issues in the NFT Ecosystem

Authors: Dipanjan Das, Priyanka Bose, Nicola Ruaro, Christopher Kruegel, Giovanni Vigna

Abstract: Non-Fungible Tokens (NFTs) have emerged as a way to collect digital art as well as an investment vehicle. Despite having been popularized only recently, NFT markets have witnessed several high-profile (and high-value) asset sales and a tremendous growth in trading volumes over the last year. Unfortunately, these marketplaces have not yet received much security scrutiny. Instead, most academic rese… ▽ More Non-Fungible Tokens (NFTs) have emerged as a way to collect digital art as well as an investment vehicle. Despite having been popularized only recently, NFT markets have witnessed several high-profile (and high-value) asset sales and a tremendous growth in trading volumes over the last year. Unfortunately, these marketplaces have not yet received much security scrutiny. Instead, most academic research has focused on attacks against decentralized finance (DeFi) protocols and automated techniques to detect smart contract vulnerabilities. To the best of our knowledge, we are the first to study the market dynamics and security issues of the multi-billion dollar NFT ecosystem. In this paper, we first present a systematic overview of how the NFT ecosystem works, and we identify three major actors: marketplaces, external entities, and users. We perform an in-depth analysis of the top 8 marketplaces (ranked by transaction volume) to discover potential issues associated with such marketplaces. Many of these issues can lead to substantial financial losses. We also collected a large amount of asset and event data pertaining to the NFTs being traded in the examined marketplaces. We automatically analyze this data to understand how the entities external to the blockchain are able to interfere with NFT markets, leading to serious consequences, and quantify the malicious trading behaviors carried out by users under the cloak of anonymity. △ Less

Submitted 27 April, 2022; v1 submitted 16 November, 2021; originally announced November 2021.

Journal ref: ACM Conference on Computer and Communications Security (CCS), 2022

Dynamic Schnyder Woods

Authors: Sujoy Bhore, Prosenjit Bose, Pilar Cano, Jean Cardinal, John Iacono

Abstract: A realizer, commonly known as Schnyder woods, of a triangulation is a partition of its interior edges into three oriented rooted trees. A flip in a realizer is a local operation that transforms one realizer into another. Two types of flips in a realizer have been introduced: colored flips and cycle flips. A corresponding flip graph is defined for each of these two types of flips. The vertex sets a… ▽ More A realizer, commonly known as Schnyder woods, of a triangulation is a partition of its interior edges into three oriented rooted trees. A flip in a realizer is a local operation that transforms one realizer into another. Two types of flips in a realizer have been introduced: colored flips and cycle flips. A corresponding flip graph is defined for each of these two types of flips. The vertex sets are the realizers, and two realizers are adjacent if they can be transformed into each other by one flip. In this paper we study the relation between these two types of flips and their corresponding flip graphs. We show that a cycle flip can be obtained from linearly many colored flips. We also prove an upper bound of $O(n^2)$ on the diameter of the flip graph of realizers defined by colored flips. In addition, a data structure is given to dynamically maintain a realizer over a sequence of colored flips which supports queries, including getting a node's barycentric coordinates, in $O(\log n)$ time per flip or query. △ Less

Submitted 28 June, 2021; originally announced June 2021.

Comments: 15 pages

MSC Class: 05C10 ACM Class: F.2; G.2

Improved Spanning on Theta-5

Authors: Prosenjit Bose, Darryl Hill, Aurélien Ooms

Abstract: We show an upper bound of $\frac{ \sin\left(\frac{3π}{10}\right) }{ \sin\left(\frac{2π}{5}\right)-\sin\left(\frac{3π}{10}\right) } <5.70$ on the spanning ratio of $Θ_5$-graphs, improving on the previous best known upper bound of $9.96$ [Bose, Morin, van Renssen, and Verdonschot. The Theta-5-graph is a spanner. Computational Geometry, 2015.] We show an upper bound of $\frac{ \sin\left(\frac{3π}{10}\right) }{ \sin\left(\frac{2π}{5}\right)-\sin\left(\frac{3π}{10}\right) } <5.70$ on the spanning ratio of $Θ_5$-graphs, improving on the previous best known upper bound of $9.96$ [Bose, Morin, van Renssen, and Verdonschot. The Theta-5-graph is a spanner. Computational Geometry, 2015.] △ Less

Submitted 2 June, 2021; originally announced June 2021.

Comments: 21 pages, 30 figures, to be published in the proceedings of WADS 2021, The 17th Algorithms and Data Structures Symposium

Separating layered treewidth and row treewidth

Authors: Prosenjit Bose, Vida Dujmović, Mehrnoosh Javarsineh, Pat Morin, David R. Wood

Abstract: Layered treewidth and row treewidth are recently introduced graph parameters that have been key ingredients in the solution of several well-known open problems. It follows from the definitions that the layered treewidth of a graph is at most its row treewidth plus 1. Moreover, a minor-closed class has bounded layered treewidth if and only if it has bounded row treewidth. However, it has been open… ▽ More Layered treewidth and row treewidth are recently introduced graph parameters that have been key ingredients in the solution of several well-known open problems. It follows from the definitions that the layered treewidth of a graph is at most its row treewidth plus 1. Moreover, a minor-closed class has bounded layered treewidth if and only if it has bounded row treewidth. However, it has been open whether row treewidth is bounded by a function of layered treewidth. This paper answers this question in the negative. In particular, for every integer $k$ we describe a graph with layered treewidth 1 and row treewidth $k$. We also prove an analogous result for layered pathwidth and row pathwidth. △ Less

Submitted 5 May, 2022; v1 submitted 3 May, 2021; originally announced May 2021.

Journal ref: Discrete Mathematics & Theoretical Computer Science, vol. 24, no. 1, Graph Theory (May 13, 2022) dmtcs:7458

SAILFISH: Vetting Smart Contract State-Inconsistency Bugs in Seconds

Authors: Priyanka Bose, Dipanjan Das, Yanju Chen, Yu Feng, Christopher Kruegel, Giovanni Vigna

Abstract: This paper presents SAILFISH, a scalable system for automatically finding state-inconsistency bugs in smart contracts. To make the analysis tractable, we introduce a hybrid approach that includes (i) a light-weight exploration phase that dramatically reduces the number of instructions to analyze, and (ii) a precise refinement phase based on symbolic evaluation guided by our novel value-summary ana… ▽ More This paper presents SAILFISH, a scalable system for automatically finding state-inconsistency bugs in smart contracts. To make the analysis tractable, we introduce a hybrid approach that includes (i) a light-weight exploration phase that dramatically reduces the number of instructions to analyze, and (ii) a precise refinement phase based on symbolic evaluation guided by our novel value-summary analysis, which generates extra constraints to over-approximate the side effects of whole-program execution, thereby ensuring the precision of the symbolic evaluation. We developed a prototype of SAILFISH and evaluated its ability to detect two state-inconsistency flaws, viz., reentrancy and transaction order dependence (TOD) in Ethereum smart contracts. Further, we present detection rules for other kinds of smart contract flaws that SAILFISH can be extended to detect. Our experiments demonstrate the efficiency of our hybrid approach as well as the benefit of the value summary analysis. In particular, we show that S SAILFISH outperforms five state-of-the-art smart contract analyzers (SECURITY, MYTHRIL, OYENTE, SEREUM and VANDAL ) in terms of performance, and precision. In total, SAILFISH discovered 47 previously unknown vulnerable smart contracts out of 89,853 smart contracts from ETHERSCAN . △ Less

Submitted 12 December, 2021; v1 submitted 17 April, 2021; originally announced April 2021.

Journal ref: IEEE Symposium on Security & Privacy, May 2022

Fragile Complexity of Adaptive Algorithms

Authors: Prosenjit Bose, Pilar Cano, Rolf Fagerberg, John Iacono, Riko Jacob, Stefan Langerman

Abstract: The fragile complexity of a comparison-based algorithm is $f(n)$ if each input element participates in $O(f(n))$ comparisons. In this paper, we explore the fragile complexity of algorithms adaptive to various restrictions on the input, i.e., algorithms with a fragile complexity parameterized by a quantity other than the input size n. We show that searching for the predecessor in a sorted array has… ▽ More The fragile complexity of a comparison-based algorithm is $f(n)$ if each input element participates in $O(f(n))$ comparisons. In this paper, we explore the fragile complexity of algorithms adaptive to various restrictions on the input, i.e., algorithms with a fragile complexity parameterized by a quantity other than the input size n. We show that searching for the predecessor in a sorted array has fragile complexity $Θ(\log k)$, where $k$ is the rank of the query element, both in a randomized and a deterministic setting. For predecessor searches, we also show how to optimally reduce the amortized fragile complexity of the elements in the array. We also prove the following results: Selecting the $k$-th smallest element has expected fragile complexity $O(\log \log k)$ for the element selected. Deterministically finding the minimum element has fragile complexity $Θ(\log(Inv))$ and $Θ(\log(Runs))$, where $Inv$ is the number of inversions in a sequence and $Runs$ is the number of increasing runs in a sequence. Deterministically finding the median has fragile complexity $O(\log(Runs) + \log \log n)$ and $Θ(\log(Inv))$. Deterministic sorting has fragile complexity $Θ(\log(Inv))$ but it has fragile complexity $Θ(\log n)$ regardless of the number of runs. △ Less

Submitted 30 January, 2021; originally announced February 2021.

Comments: Appears at proceedings of the 12th International Conference on Algorithms and Complexity (CIAC 2021)

MSC Class: 68W05; 68W20 ACM Class: F.2.2

Affine invariant triangulations

Authors: Prosenjit Bose, Pilar Cano, Rodrigo I. Silveira

Abstract: We study affine invariant 2D triangulation methods. That is, methods that produce the same triangulation for a point set $S$ for any (unknown) affine transformation of $S$. Our work is based on a method by Nielson [A characterization of an affine invariant triangulation. Geom. Mod, 191-210. Springer, 1993] that uses the inverse of the covariance matrix of $S$ to define an affine invariant norm, de… ▽ More We study affine invariant 2D triangulation methods. That is, methods that produce the same triangulation for a point set $S$ for any (unknown) affine transformation of $S$. Our work is based on a method by Nielson [A characterization of an affine invariant triangulation. Geom. Mod, 191-210. Springer, 1993] that uses the inverse of the covariance matrix of $S$ to define an affine invariant norm, denoted $A_{S}$, and an affine invariant triangulation, denoted ${DT}_{A_{S}}[S]$. We revisit the $A_{S}$-norm from a geometric perspective, and show that ${DT}_{A_{S}}[S]$ can be seen as a standard Delaunay triangulation of a transformed point set based on $S$. We prove that it retains all of its well-known properties such as being 1-tough, containing a perfect matching, and being a constant spanner of the complete geometric graph of $S$. We show that the $A_{S}$-norm extends to a hierarchy of related geometric structures such as the minimum spanning tree, nearest neighbor graph, Gabriel graph, relative neighborhood graph, and higher order versions of these graphs. In addition, we provide different affine invariant sorting methods of a point set $S$ and of the vertices of a polygon $P$ that can be combined with known algorithms to obtain other affine invariant triangulation methods of $S$ and of $P$. △ Less

Submitted 4 November, 2020; originally announced November 2020.

MicroGrad: A Centralized Framework for Workload Cloning and Stress Testing

Authors: Gokul Subramanian Ravi, Ramon Bertran, Pradip Bose, Mikko Lipasti

Abstract: We present MicroGrad, a centralized automated framework that is able to efficiently analyze the capabilities, limits and sensitivities of complex modern processors in the face of constantly evolving application domains. MicroGrad uses Microprobe, a flexible code generation framework as its back-end and a Gradient Descent based tuning mechanism to efficiently enable the evolution of the test cases… ▽ More We present MicroGrad, a centralized automated framework that is able to efficiently analyze the capabilities, limits and sensitivities of complex modern processors in the face of constantly evolving application domains. MicroGrad uses Microprobe, a flexible code generation framework as its back-end and a Gradient Descent based tuning mechanism to efficiently enable the evolution of the test cases to suit tasks such as Workload Cloning and Stress Testing. MicroGrad can interface with a variety of execution infrastructure such as performance and power simulators as well as native hardware. Further, the modular 'abstract workload model' approach to building MicroGrad allows it to be easily extended for further use. In this paper, we evaluate MicroGrad over different use cases and architectures and showcase that MicroGrad can achieve greater than 99\% accuracy across different tasks within few tuning epochs and low resource requirements. We also observe that MicroGrad's accuracy is 25 to 30\% higher than competing techniques. At the same time, it is 1.5x to 2.5x faster or would consume 35 to 60\% less compute resources (depending on implementation) over alternate mechanisms. Overall, MicroGrad's fast, resource efficient and accurate test case generation capability allow it to perform rapid evaluation of complex processors. △ Less

Submitted 9 September, 2020; originally announced September 2020.

STOMP: A Tool for Evaluation of Scheduling Policies in Heterogeneous Multi-Processors

Authors: Augusto Vega, Aporva Amarnath, John-David Wellman, Hiwot Kassa, Subhankar Pal, Hubertus Franke, Alper Buyuktosunoglu, Ronald Dreslinski, Pradip Bose

Abstract: The proliferation of heterogeneous chip multiprocessors in recent years has reached unprecedented levels. Traditional homogeneous platforms have shown fundamental limitations when it comes to enabling high-performance yet-ultra-low-power computing, in particular in application domains with real-time execution deadlines or criticality constraints. By combining the right set of general purpose cores… ▽ More The proliferation of heterogeneous chip multiprocessors in recent years has reached unprecedented levels. Traditional homogeneous platforms have shown fundamental limitations when it comes to enabling high-performance yet-ultra-low-power computing, in particular in application domains with real-time execution deadlines or criticality constraints. By combining the right set of general purpose cores and hardware accelerators together, along with proper chip interconnects and memory technology, heterogeneous chip multiprocessors have become an effective high-performance and low-power computing alternative. One of the challenges of heterogeneous architectures relates to efficient scheduling of application tasks (processes, threads) across the variety of options in the chip. As a result, it is key to provide tools to enable early-stage prototyping and evaluation of new scheduling policies for heterogeneous platforms. In this paper, we present STOMP (Scheduling Techniques Optimization in heterogeneous Multi-Processors), a simulator for fast implementation and evaluation of task scheduling policies in multi-core/multi-processor systems with a convenient interface for "plugging" in new scheduling policies in a simple manner. Thorough validation of STOMP exhibits small relative errors when compared against closed-formed equivalent models during steady-state analysis. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Asymptotically Optimal Vertex Ranking of Planar Graphs

Authors: Prosenjit Bose, Vida Dujmović, Mehrnoosh Javarsineh, Pat Morin

Abstract: A (vertex) $\ell$-ranking is a colouring $\varphi:V(G)\to\mathbb{N}$ of the vertices of a graph $G$ with integer colours so that for any path $u_0,\ldots,u_p$ of length at most $\ell$, $\varphi(u_0)\neq\varphi(u_p)$ or $\varphi(u_0)<\max\{\varphi(u_0),\ldots,\varphi(u_p)\}$. We show that, for any fixed integer $\ell\ge 2$, every $n$-vertex planar graph has an $\ell$-ranking using… ▽ More A (vertex) $\ell$-ranking is a colouring $\varphi:V(G)\to\mathbb{N}$ of the vertices of a graph $G$ with integer colours so that for any path $u_0,\ldots,u_p$ of length at most $\ell$, $\varphi(u_0)\neq\varphi(u_p)$ or $\varphi(u_0)<\max\{\varphi(u_0),\ldots,\varphi(u_p)\}$. We show that, for any fixed integer $\ell\ge 2$, every $n$-vertex planar graph has an $\ell$-ranking using $O(\log n/\log\log\log n)$ colours and this is tight even when $\ell=2$; for infinitely many values of $n$, there are $n$-vertex planar graphs, for which any 2-ranking requires $Ω(\log n/\log\log\log n)$ colours. This result also extends to bounded genus graphs. In developing this proof we obtain optimal bounds on the number of colours needed for $\ell$-ranking graphs of treewidth $t$ and graphs of simple treewidth $t$. These upper bounds are constructive and give $O(n)$-time algorithms. Additional results that come from our techniques include new sublogarithmic upper bounds on the number of colours needed for $\ell$-rankings of apex minor-free graphs and $k$-planar graphs. △ Less

Submitted 18 August, 2022; v1 submitted 13 July, 2020; originally announced July 2020.

Comments: Many minor corrections. Added a new proof outline and two figures

(Faster) Multi-Sided Boundary Labelling

Authors: Prosenjit Bose, Saeed Mehrabi, Debajyoti Mondal

Abstract: A 1-bend boundary labelling problem consists of an axis-aligned rectangle $B$, $n$ points (called sites) in the interior, and $n$ points (called ports) on the labels along the boundary of $B$. The goal is to find a set of $n$ axis-aligned curves (called leaders), each having at most one bend and connecting one site to one port, such that the leaders are pairwise disjoint. A 1-bend boundary labelli… ▽ More A 1-bend boundary labelling problem consists of an axis-aligned rectangle $B$, $n$ points (called sites) in the interior, and $n$ points (called ports) on the labels along the boundary of $B$. The goal is to find a set of $n$ axis-aligned curves (called leaders), each having at most one bend and connecting one site to one port, such that the leaders are pairwise disjoint. A 1-bend boundary labelling problem is $k$-sided ($1\leq k\leq 4$) if the ports appear on $k$ different sides of $B$. Kindermann et al. ["Multi-Sided Boundary Labeling", Algorithmica, 76(1): 225-258, 2016] showed that the 1-bend three-sided and four-sided boundary labelling problems can be solved in $O(n^4)$ and $O(n^9)$ time, respectively. Bose et al. [SWAT, 12:1-12:14, 2018] improved the latter running time to $O(n^6)$ by reducing the problem to computing maximum independent set in an outerstring graph. In this paper, we improve both previous results by giving new algorithms with running times $O(n^3\log n)$ and $O(n^5)$ to solve the 1-bend three-sided and four-sided boundary labelling problems, respectively. △ Less

Submitted 22 February, 2020; originally announced February 2020.

Comments: 16 pages, 12 figures

Drawing Graphs as Spanners

Authors: Oswin Aichholzer, Manuel Borrazzo, Prosenjit Bose, Jean Cardinal, Fabrizio Frati, Pat Morin, Birgit Vogtenhuber

Abstract: We study the problem of embedding graphs in the plane as good geometric spanners. That is, for a graph $G$, the goal is to construct a straight-line drawing $Γ$ of $G$ in the plane such that, for any two vertices $u$ and $v$ of $G$, the ratio between the minimum length of any path from $u$ to $v$ and the Euclidean distance between $u$ and $v$ is small. The maximum such ratio, over all pairs of ver… ▽ More We study the problem of embedding graphs in the plane as good geometric spanners. That is, for a graph $G$, the goal is to construct a straight-line drawing $Γ$ of $G$ in the plane such that, for any two vertices $u$ and $v$ of $G$, the ratio between the minimum length of any path from $u$ to $v$ and the Euclidean distance between $u$ and $v$ is small. The maximum such ratio, over all pairs of vertices of $G$, is the spanning ratio of $Γ$. First, we show that deciding whether a graph admits a straight-line drawing with spanning ratio $1$, a proper straight-line drawing with spanning ratio $1$, and a planar straight-line drawing with spanning ratio $1$ are NP-complete, $\exists \mathbb R$-complete, and linear-time solvable problems, respectively, where a drawing is proper if no two vertices overlap and no edge overlaps a vertex. Second, we show that moving from spanning ratio $1$ to spanning ratio $1+ε$ allows us to draw every graph. Namely, we prove that, for every $ε>0$, every (planar) graph admits a proper (resp. planar) straight-line drawing with spanning ratio smaller than $1+ε$. Third, our drawings with spanning ratio smaller than $1+ε$ have large edge-length ratio, that is, the ratio between the length of the longest edge and the length of the shortest edge is exponential. We show that this is sometimes unavoidable. More generally, we identify having bounded toughness as the criterion that distinguishes graphs that admit straight-line drawings with constant spanning ratio and polynomial edge-length ratio from graphs that require exponential edge-length ratio in any straight-line drawing with constant spanning ratio. △ Less

Submitted 13 February, 2020; originally announced February 2020.

Parameterized Complexity of Two-Interval Pattern Problem

Authors: Prosenjit Bose, Saeed Mehrabi, Debajyoti Mondal

Abstract: A \emph{2-interval} is the union of two disjoint intervals on the real line. Two 2-intervals $D_1$ and $D_2$ are \emph{disjoint} if their intersection is empty (i.e., no interval of $D_1$ intersects any interval of $D_2$). There can be three different relations between two disjoint 2-intervals; namely, preceding ($<$), nested ($\sqsubset$) and crossing ($\between$). Two 2-intervals $D_1$ and… ▽ More A \emph{2-interval} is the union of two disjoint intervals on the real line. Two 2-intervals $D_1$ and $D_2$ are \emph{disjoint} if their intersection is empty (i.e., no interval of $D_1$ intersects any interval of $D_2$). There can be three different relations between two disjoint 2-intervals; namely, preceding ($<$), nested ($\sqsubset$) and crossing ($\between$). Two 2-intervals $D_1$ and $D_2$ are called \emph{$R$-comparable} for some $R\in\{<,\sqsubset,\between\}$, if either $D_1RD_2$ or $D_2RD_1$. A set $\mathcal{D}$ of disjoint 2-intervals is $\mathcal{R}$-comparable, for some $\mathcal{R}\subseteq\{<,\sqsubset,\between\}$ and $\mathcal{R}\neq\emptyset$, if every pair of 2-intervals in $\mathcal{R}$ are $R$-comparable for some $R\in\mathcal{R}$. Given a set of 2-intervals and some $\mathcal{R}\subseteq\{<,\sqsubset,\between\}$, the objective of the \emph{2-interval pattern problem} is to find a largest subset of 2-intervals that is $\mathcal{R}$-comparable. The 2-interval pattern problem is known to be $W[1]$-hard when $|\mathcal{R}|=3$ and $NP$-hard when $|\mathcal{R}|=2$ (except for $\mathcal{R}=\{<,\sqsubset\}$, which is solvable in quadratic time). In this paper, we fully settle the parameterized complexity of the problem by showing it to be $W[1]$-hard for both $\mathcal{R}=\{\sqsubset,\between\}$ and $\mathcal{R}=\{<,\between\}$ (when parameterized by the size of an optimal solution); this answers an open question posed by Vialette [Encyclopedia of Algorithms, 2008]. △ Less

Submitted 12 February, 2020; originally announced February 2020.

Comments: 11 pages, 6 figures

Expected Complexity of Routing in $Θ$ 6 and Half-$Θ$ 6 Graphs

Authors: Prosenjit Bose, Jean-Lou de Carufel, Olivier Devillers

Abstract: We study online routing algorithms on the $Θ$6-graph and the half-$Θ$6-graph (which is equivalent to a variant of the Delaunay triangulation). Given a source vertex s and a target vertex t in the $Θ$6-graph (resp. half-$Θ$6-graph), there exists a deterministic online routing algorithm that finds a path from s to t whose length is at most 2 st (resp. 2.89 st) which is optimal in the worst case [Bos… ▽ More We study online routing algorithms on the $Θ$6-graph and the half-$Θ$6-graph (which is equivalent to a variant of the Delaunay triangulation). Given a source vertex s and a target vertex t in the $Θ$6-graph (resp. half-$Θ$6-graph), there exists a deterministic online routing algorithm that finds a path from s to t whose length is at most 2 st (resp. 2.89 st) which is optimal in the worst case [Bose et al., siam J. on Computing, 44(6)]. We propose alternative, slightly simpler routing algorithms that are optimal in the worst case and for which we provide an analysis of the average routing ratio for the $Θ$6-graph and half-$Θ$6-graph defined on a Poisson point process. For the $Θ$6-graph, our online routing algorithm has an expected routing ratio of 1.161 (when s and t random) and a maximum expected routing ratio of 1.22 (maximum for fixed s and t where all other points are random), much better than the worst-case routing ratio of 2. For the half-$Θ$6-graph, our memoryless online routing algorithm has an expected routing ratio of 1.43 and a maximum expected routing ratio of 1.58. Our online routing algorithm that uses a constant amount of additional memory has an expected routing ratio of 1.34 and a maximum expected routing ratio of 1.40. The additional memory is only used to remember the coordinates of the starting point of the route. Both of these algorithms have an expected routing ratio that is much better than their worst-case routing ratio of 2.89. △ Less

Submitted 29 November, 2019; v1 submitted 31 October, 2019; originally announced October 2019.

Competitive Online Search Trees on Trees

Authors: Prosenjit Bose, Jean Cardinal, John Iacono, Grigorios Koumoutsos, Stefan Langerman

Abstract: We consider the design of adaptive data structures for searching elements of a tree-structured space. We use a natural generalization of the rotation-based online binary search tree model in which the underlying search space is the set of vertices of a tree. This model is based on a simple structure for decomposing graphs, previously known under several names including elimination trees, vertex ra… ▽ More We consider the design of adaptive data structures for searching elements of a tree-structured space. We use a natural generalization of the rotation-based online binary search tree model in which the underlying search space is the set of vertices of a tree. This model is based on a simple structure for decomposing graphs, previously known under several names including elimination trees, vertex rankings, and tubings. The model is equivalent to the classical binary search tree model exactly when the underlying tree is a path. We describe an online $O(\log \log n)$-competitive search tree data structure in this model, matching the best known competitive ratio of binary search trees. Our method is inspired by Tango trees, an online binary search tree algorithm, but critically needs several new notions including one which we call Steiner-closed search trees, which may be of independent interest. Moreover our technique is based on a novel use of two levels of decomposition, first from search space to a set of Steiner-closed trees, and secondly from these trees into paths. △ Less

Submitted 2 August, 2019; originally announced August 2019.

Computing Maximum Independent Set on Outerstring Graphs and Their Relatives

Authors: Prosenjit Bose, Paz Carmi, J. Mark Keil, Anil Maheshwari, Saeed Mehrabi, Debajyoti Mondal, Michiel Smid

Abstract: A graph $G$ with $n$ vertices is called an outerstring graph if it has an intersection representation of a set of $n$ curves inside a disk such that one endpoint of every curve is attached to the boundary of the disk. Given an outerstring graph representation, the Maximum Independent Set (MIS) problem of the underlying graph can be computed in $O(s^3)$ time, where $s$ is the number of segments in… ▽ More A graph $G$ with $n$ vertices is called an outerstring graph if it has an intersection representation of a set of $n$ curves inside a disk such that one endpoint of every curve is attached to the boundary of the disk. Given an outerstring graph representation, the Maximum Independent Set (MIS) problem of the underlying graph can be computed in $O(s^3)$ time, where $s$ is the number of segments in the representation (Keil et al., Comput. Geom., 60:19--25, 2017). If the strings are of constant size (e.g., line segments, L-shapes, etc.), then the algorithm takes $O(n^3)$ time. In this paper, we examine the fine-grained complexity of the MIS problem on some well-known outerstring representations. We show that solving the MIS problem on grounded segment and grounded square-L representations is at least as hard as solving MIS on circle graph representations. Note that no $O(n^{2-δ})$-time algorithm, $δ>0$, is known for the MIS problem on circle graphs. For the grounded string representations where the strings are $y$-monotone simple polygonal paths of constant length with segments at integral coordinates, we solve MIS in $O(n^2)$ time and show this to be the best possible under the strong exponential time hypothesis (SETH). For the intersection graph of $n$ L-shapes in the plane, we give a $(4\cdot \log OPT)$-approximation algorithm for MIS (where $OPT$ denotes the size of an optimal solution), improving the previously best-known $(4\cdot \log n)$-approximation algorithm of Biedl and Derka (WADS 2017). △ Less

Submitted 1 August, 2021; v1 submitted 17 March, 2019; originally announced March 2019.

Comments: A preliminary version of this paper appeared in the 16th International Symposium on Algorithms and Data Structures (WADS 2019)

MSC Class: 68Q25; 65D18 ACM Class: I.3.5

Near-Optimal $O(k)$-Robust Geometric Spanners

Authors: Prosenjit Bose, Paz Carmi, Vida Dujmovic, Pat Morin

Abstract: For any constants $d\ge 1$, $ε>0$, $t>1$, and any $n$-point set $P\subset\mathbb{R}^d$, we show that there is a geometric graph $G=(P,E)$ having $O(n\log^2 n\log\log n)$ edges with the following property: For any $F\subseteq P$, there exists $F^+\supseteq F$, $|F^+| \le (1+ε)|F|$ such that, for any pair $p,q\in P\setminus F^+$, the graph $G-F$ contains a path from $p$ to $q$ whose (Euclidean) leng… ▽ More For any constants $d\ge 1$, $ε>0$, $t>1$, and any $n$-point set $P\subset\mathbb{R}^d$, we show that there is a geometric graph $G=(P,E)$ having $O(n\log^2 n\log\log n)$ edges with the following property: For any $F\subseteq P$, there exists $F^+\supseteq F$, $|F^+| \le (1+ε)|F|$ such that, for any pair $p,q\in P\setminus F^+$, the graph $G-F$ contains a path from $p$ to $q$ whose (Euclidean) length is at most $t$ times the Euclidean distance between $p$ and $q$. In the terminology of robust spanners (Bose \et al, SICOMP, 42(4):1720--1736, 2013) the graph $G$ is a $(1+ε)k$-robust $t$-spanner of $P$. This construction is sparser than the recent constructions of Buchin, Olàh, and Har-Peled (arXiv:1811.06898) who prove the existence of $(1+ε)k$-robust $t$-spanners with $n\log^{O(d)} n$ edges. △ Less

Submitted 6 January, 2019; v1 submitted 24 December, 2018; originally announced December 2018.

Comments: New version with streamlined construction and fewer edges

Gathering by Repulsion

Authors: Prosenjit Bose, Thomas Shermer

Abstract: We consider a repulsion actuator located in an $n$-sided convex environment full of point particles. When the actuator is activated, all the particles move away from the actuator. We study the problem of gathering all the particles to a point. We give an $O(n^2)$ time algorithm to compute all the actuator locations that gather the particles to one point with one activation, and an $O(n)$ time algo… ▽ More We consider a repulsion actuator located in an $n$-sided convex environment full of point particles. When the actuator is activated, all the particles move away from the actuator. We study the problem of gathering all the particles to a point. We give an $O(n^2)$ time algorithm to compute all the actuator locations that gather the particles to one point with one activation, and an $O(n)$ time algorithm to find a single such actuator location if one exists. We then provide an $O(n)$ time algorithm to place the optimal number of actuators whose sequential activation results in the gathering of the particles when such a placement exists. △ Less

Submitted 25 September, 2018; originally announced September 2018.

Pole Dancing: 3D Morphs for Tree Drawings

Authors: Elena Arseneva, Prosenjit Bose, Pilar Cano, Anthony D'Angelo, Vida Dujmovic, Fabrizio Frati, Stefan Langerman, Alessandra Tappini

Abstract: We study the question whether a crossing-free 3D morph between two straight-line drawings of an $n$-vertex tree can be constructed consisting of a small number of linear morphing steps. We look both at the case in which the two given drawings are two-dimensional and at the one in which they are three-dimensional. In the former setting we prove that a crossing-free 3D morph always exists with… ▽ More We study the question whether a crossing-free 3D morph between two straight-line drawings of an $n$-vertex tree can be constructed consisting of a small number of linear morphing steps. We look both at the case in which the two given drawings are two-dimensional and at the one in which they are three-dimensional. In the former setting we prove that a crossing-free 3D morph always exists with $O(\log n)$ steps, while for the latter $Θ(n)$ steps are always sufficient and sometimes necessary. △ Less

Submitted 3 September, 2018; v1 submitted 31 August, 2018; originally announced August 2018.

Comments: Appears in the Proceedings of the 26th International Symposium on Graph Drawing and Network Visualization (GD 2018)

Identifying Implementation Bugs in Machine Learning based Image Classifiers using Metamorphic Testing

Authors: Anurag Dwarakanath, Manish Ahuja, Samarth Sikand, Raghotham M. Rao, R. P. Jagadeesh Chandra Bose, Neville Dubash, Sanjay Podder

Abstract: We have recently witnessed tremendous success of Machine Learning (ML) in practical applications. Computer vision, speech recognition and language translation have all seen a near human level performance. We expect, in the near future, most business applications will have some form of ML. However, testing such applications is extremely challenging and would be very expensive if we follow today's m… ▽ More We have recently witnessed tremendous success of Machine Learning (ML) in practical applications. Computer vision, speech recognition and language translation have all seen a near human level performance. We expect, in the near future, most business applications will have some form of ML. However, testing such applications is extremely challenging and would be very expensive if we follow today's methodologies. In this work, we present an articulation of the challenges in testing ML based applications. We then present our solution approach, based on the concept of Metamorphic Testing, which aims to identify implementation bugs in ML based image classifiers. We have developed metamorphic relations for an application based on Support Vector Machine and a Deep Learning based application. Empirical validation showed that our approach was able to catch 71% of the implementation bugs in the ML applications. △ Less

Submitted 16 August, 2018; originally announced August 2018.

Comments: Published at 27th ACM SIGSOFT International Symposium on Software Testing and Analysis (ISSTA 2018)

On the Spanning and Routing Ratio of Directed Theta-Four

Authors: Prosenjit Bose, Jean-Lou De Carufel, Darryl Hill, Michiel Smid

Abstract: We present a routing algorithm for the directed $Θ_4$-graph, here denoted as the $\overrightarrow{Θ_4}}$-graph, that computes a path between any two vertices $s$ and $t$ having length at most $17$ times the Euclidean distance between $s$ and $t$. To compute this path, at each step, the algorithm only uses knowledge of the location of the current vertex, its (at most four) outgoing edges, the desti… ▽ More We present a routing algorithm for the directed $Θ_4$-graph, here denoted as the $\overrightarrow{Θ_4}}$-graph, that computes a path between any two vertices $s$ and $t$ having length at most $17$ times the Euclidean distance between $s$ and $t$. To compute this path, at each step, the algorithm only uses knowledge of the location of the current vertex, its (at most four) outgoing edges, the destination vertex, and one additional bit of information in order to determine the next edge to follow. This provides the first known online, local, competitive routing algorithm with constant routing ratio for the $Θ_4$-graph, as well as improving the best known upper bound on the spanning ratio of these graphs from $237$ to $17$. We also show that without this additional bit of information, the routing ratio increases to $\sqrt{290} \approx 17.03$. △ Less

Submitted 12 July, 2021; v1 submitted 3 August, 2018; originally announced August 2018.

Comments: 12 pages, 7 figures

MSC Class: 68-XX

Improved Bounds for Guarding Plane Graphs with Edges

Authors: Ahmad Biniaz, Prosenjit Bose, Aurélien Ooms, Sander Verdonschot

Abstract: An "edge guard set" of a plane graph $G$ is a subset $Γ$ of edges of $G$ such that each face of $G$ is incident to an endpoint of an edge in $Γ$. Such a set is said to guard $G$. We improve the known upper bounds on the number of edges required to guard any $n$-vertex embedded planar graph $G$: 1- We present a simple inductive proof for a theorem of Everett and Rivera-Campo (1997) that $G$ can b… ▽ More An "edge guard set" of a plane graph $G$ is a subset $Γ$ of edges of $G$ such that each face of $G$ is incident to an endpoint of an edge in $Γ$. Such a set is said to guard $G$. We improve the known upper bounds on the number of edges required to guard any $n$-vertex embedded planar graph $G$: 1- We present a simple inductive proof for a theorem of Everett and Rivera-Campo (1997) that $G$ can be guarded with at most $ \frac{2n}{5}$ edges, then extend this approach with a deeper analysis to yield an improved bound of $\frac{3n}{8}$ edges for any plane graph. 2- We prove that there exists an edge guard set of $G$ with at most $\frac{n}{3}+\fracα{9}$ edges, where $α$ is the number of quadrilateral faces in $G$. This improves the previous bound of $\frac{n}{3} + α$ by Bose, Kirkpatrick, and Li (2003). Moreover, if there is no short path between any two quadrilateral faces in $G$, we show that $\frac{n}{3}$ edges suffice, removing the dependence on $α$. △ Less

Submitted 19 April, 2018; originally announced April 2018.

Comments: 12 pages, to appear in SWAT 2018

Boundary Labeling for Rectangular Diagrams

Authors: Prosenjit Bose, Paz Carmi, J. Mark Keil, Saeed Mehrabi, Debajyoti Mondal

Abstract: Given a set of $n$ points (sites) inside a rectangle $R$ and $n$ points (label locations or ports) on its boundary, a boundary labeling problem seeks ways of connecting every site to a distinct port while achieving different labeling aesthetics. We examine the scenario when the connecting lines (leaders) are drawn as axis-aligned polylines with few bends, every leader lies strictly inside $R$, no… ▽ More Given a set of $n$ points (sites) inside a rectangle $R$ and $n$ points (label locations or ports) on its boundary, a boundary labeling problem seeks ways of connecting every site to a distinct port while achieving different labeling aesthetics. We examine the scenario when the connecting lines (leaders) are drawn as axis-aligned polylines with few bends, every leader lies strictly inside $R$, no two leaders cross, and the sum of the lengths of all the leaders is minimized. In a $k$-sided boundary labeling problem, where $1\le k\le 4$, the label locations are located on the $k$ consecutive sides of $R$. In this paper, we develop an $O(n^3\log n)$-time algorithm for 2-sided boundary labeling, where the leaders are restricted to have one bend. This improves the previously best known $O(n^8\log n)$-time algorithm of Kindermann et al. (Algorithmica, 76(1):225-258, 2016). We show the problem is polynomial-time solvable in more general settings such as when the ports are located on more than two sides of $R$, in the presence of obstacles, and even when the objective is to minimize the total number of bends. Our results improve the previous algorithms on boundary labeling with obstacles, as well as provide the first polynomial-time algorithms for minimizing the total leader length and number of bends for 3- and 4-sided boundary labeling. These results settle a number of open questions on the boundary labeling problems (Wolff, Handbook of Graph Drawing, Chapter 23, Table 23.1, 2014). △ Less

Submitted 28 March, 2018; originally announced March 2018.

Comments: 18 pages, 9 figures

Geodesic Obstacle Representation of Graphs

Authors: Prosenjit Bose, Paz Carmi, Vida Dujmovic, Saeed Mehrabi, Fabrizio Montecchiani, Pat Morin, Luis Fernando Schultz Xavier da Silveira

Abstract: An obstacle representation of a graph is a mapping of the vertices onto points in the plane and a set of connected regions of the plane (called obstacles) such that the straight-line segment connecting the points corresponding to two vertices does not intersect any obstacles if and only if the vertices are adjacent in the graph. The obstacle representation and its plane variant (in which the resul… ▽ More An obstacle representation of a graph is a mapping of the vertices onto points in the plane and a set of connected regions of the plane (called obstacles) such that the straight-line segment connecting the points corresponding to two vertices does not intersect any obstacles if and only if the vertices are adjacent in the graph. The obstacle representation and its plane variant (in which the resulting representation is a plane straight-line embedding of the graph) have been extensively studied with the main objective of minimizing the number of obstacles. Recently, Biedl and Mehrabi (GD 2017) studied grid obstacle representations of graphs in which the vertices of the graph are mapped onto the points in the plane while the straight-line segments representing the adjacency between the vertices is replaced by the $L_1$ (Manhattan) shortest paths in the plane that avoid obstacles. In this paper, we introduce the notion of geodesic obstacle representations of graphs with the main goal of providing a generalized model, which comes naturally when viewing line segments as shortest paths in the Euclidean plane. To this end, we extend the definition of obstacle representation by allowing some obstacles-avoiding shortest path between the corresponding points in the underlying metric space whenever the vertices are adjacent in the graph. We consider both general and plane variants of geodesic obstacle representations (in a similar sense to obstacle representations) under any polyhedral distance function in $\mathbb{R}^d$ as well as shortest path distances in graphs. Our results generalize and unify the notions of obstacle representations, plane obstacle representations and grid obstacle representations, leading to a number of questions on such embeddings. △ Less

Submitted 9 March, 2018; originally announced March 2018.

Routing on the Visibility Graph

Authors: Prosenjit Bose, Matias Korman, André van Renssen, Sander Verdonschot

Abstract: We consider the problem of routing on a network in the presence of line segment constraints (i.e., obstacles that edges in our network are not allowed to cross). Let $P$ be a set of $n$ points in the plane and let $S$ be a set of non-crossing line segments whose endpoints are in $P$. We present two deterministic 1-local $O(1)$-memory routing algorithms that are guaranteed to find a path of at most… ▽ More We consider the problem of routing on a network in the presence of line segment constraints (i.e., obstacles that edges in our network are not allowed to cross). Let $P$ be a set of $n$ points in the plane and let $S$ be a set of non-crossing line segments whose endpoints are in $P$. We present two deterministic 1-local $O(1)$-memory routing algorithms that are guaranteed to find a path of at most linear size between any pair of vertices of the \emph{visibility graph} of $P$ with respect to a set of constraints $S$ (i.e., the algorithms never look beyond the direct neighbours of the current location and store only a constant amount of additional information). Contrary to {\em all} existing deterministic local routing algorithms, our routing algorithms do not route on a plane subgraph of the visibility graph. Additionally, we provide lower bounds on the routing ratio of any deterministic local routing algorithm on the visibility graph. △ Less

Submitted 2 January, 2019; v1 submitted 8 March, 2018; originally announced March 2018.

Comments: An extended abstract of this paper appeared in the proceedings of the 28th International Symposium on Algorithms and Computation (ISAAC 2017). Final version appeared in the Journal of Computational Geometry

Faster Algorithms for some Optimization Problems on Collinear Points

Authors: Ahmad Biniaz, Prosenjit Bose, Paz Carmi, Anil Maheshwari, J. Ian Munro, Michiel Smid

Abstract: We propose faster algorithms for the following three optimization problems on $n$ collinear points, i.e., points in dimension one. The first two problems are known to be NP-hard in higher dimensions. 1- Maximizing total area of disjoint disks: In this problem the goal is to maximize the total area of nonoverlapping disks centered at the points. Acharyya, De, and Nandy (2017) presented an… ▽ More We propose faster algorithms for the following three optimization problems on $n$ collinear points, i.e., points in dimension one. The first two problems are known to be NP-hard in higher dimensions. 1- Maximizing total area of disjoint disks: In this problem the goal is to maximize the total area of nonoverlapping disks centered at the points. Acharyya, De, and Nandy (2017) presented an $O(n^2)$-time algorithm for this problem. We present an optimal $Θ(n)$-time algorithm. 2- Minimizing sum of the radii of client-server coverage: The $n$ points are partitioned into two sets, namely clients and servers. The goal is to minimize the sum of the radii of disks centered at servers such that every client is in some disk, i.e., in the coverage range of some server. Lev-Tov and Peleg (2005) presented an $O(n^3)$-time algorithm for this problem. We present an $O(n^2)$-time algorithm, thereby improving the running time by a factor of $Θ(n)$. 3- Minimizing total area of point-interval coverage: The $n$ input points belong to an interval $I$. The goal is to find a set of $n$ disks of minimum total area, covering $I$, such that every disk contains at least one input point. We present an algorithm that solves this problem in $O(n^2)$ time. △ Less

Submitted 26 July, 2018; v1 submitted 26 February, 2018; originally announced February 2018.

Comments: To appear in SoCG 2018. Full version (15 pages)

Reconstructing a convex polygon from its $ω$-cloud

Authors: Elena Arseneva, Prosenjit Bose, Jean-Lou De Carufel, Sander Verdonschot

Abstract: An $ω$-wedge is the closed set of points contained between two rays that are emanating from a single point (the apex), and are separated by an angle $ω< π$. Given a convex polygon $P$, we place the $ω$-wedge such that $P$ is inside the wedge and both rays are tangent to $P$. The set of apex positions of all such placements of the $ω$-wedge is called the $ω$-cloud of $P$. We investigate reconstru… ▽ More An $ω$-wedge is the closed set of points contained between two rays that are emanating from a single point (the apex), and are separated by an angle $ω< π$. Given a convex polygon $P$, we place the $ω$-wedge such that $P$ is inside the wedge and both rays are tangent to $P$. The set of apex positions of all such placements of the $ω$-wedge is called the $ω$-cloud of $P$. We investigate reconstructing a polygon $P$ from its $ω$-cloud. Previous work on reconstructing $P$ from probes with the $ω$-wedge required knowledge of the points of tangency between $P$ and the two rays of the $ω$-wedge in addition to the location of the apex. Here we consider the setting where the maximal $ω$-cloud alone is given. We give two conditions under which it uniquely defines $P$: (i) when $ω< π$ is fixed/given, or (ii) when what is known is that $ω< π/2$. We show that if neither of these two conditions hold, then $P$ may not be unique. We show that, when the uniqueness conditions hold, the polygon $P$ can be reconstructed in $O(n)$ time with $O(1)$ working space in addition to the input, where $n$ is the number of arcs in the input $ω$-cloud. △ Less

Submitted 20 March, 2019; v1 submitted 7 January, 2018; originally announced January 2018.

Comments: 16 pages, 6 figures

Constrained Routing Between Non-Visible Vertices

Authors: Prosenjit Bose, Matias Korman, André van Renssen, Sander Verdonschot

Abstract: In this paper we study local routing strategies on geometric graphs. Such strategies use geometric properties of the graph like the coordinates of the current and target nodes to route. Specifically, we study routing strategies in the presence of constraints which are obstacles that edges of the graph are not allowed to cross. Let $P$ be a set of $n$ points in the plane and let $S$ be a set of lin… ▽ More In this paper we study local routing strategies on geometric graphs. Such strategies use geometric properties of the graph like the coordinates of the current and target nodes to route. Specifically, we study routing strategies in the presence of constraints which are obstacles that edges of the graph are not allowed to cross. Let $P$ be a set of $n$ points in the plane and let $S$ be a set of line segments whose endpoints are in $P$, with no two line segments intersecting properly. We present the first deterministic 1-local $O(1)$-memory routing algorithm that is guaranteed to find a path between two vertices in the visibility graph of $P$ with respect to a set of constraints $S$. The strategy never looks beyond the direct neighbors of the current node and does not store more than $O(1)$-information to reach the target. We then turn our attention to finding competitive routing strategies. We show that when routing on any triangulation $T$ of $P$ such that $S\subseteq T$, no $o(n)$-competitive routing algorithm exists when the routing strategy restricts its attention to the triangles intersected by the line segment from the source to the target (a technique commonly used in the unconstrained setting). Finally, we provide an $O(n)$-competitive deterministic 1-local $O(1)$-memory routing algorithm on any such $T$, which is optimal in the worst case, given the lower bound. △ Less

Submitted 8 February, 2021; v1 submitted 22 October, 2017; originally announced October 2017.