Showing 1–30 of 30 results for author: Coleri, S

Diffusion Model Based Resource Allocation Strategy in Ultra-Reliable Wireless Networked Control Systems

Authors: Amirhassan Babazadeh Darabi, Sinem Coleri

Abstract: Diffusion models are vastly used in generative AI, leveraging their capability to capture complex data distributions. However, their potential remains largely unexplored in the field of resource allocation in wireless networks. This paper introduces a novel diffusion model-based resource allocation strategy for Wireless Networked Control Systems (WNCSs) with the objective of minimizing total power… ▽ More Diffusion models are vastly used in generative AI, leveraging their capability to capture complex data distributions. However, their potential remains largely unexplored in the field of resource allocation in wireless networks. This paper introduces a novel diffusion model-based resource allocation strategy for Wireless Networked Control Systems (WNCSs) with the objective of minimizing total power consumption through the optimization of the sampling period in the control system, and blocklength and packet error probability in the finite blocklength regime of the communication system. The problem is first reduced to the optimization of blocklength only based on the derivation of the optimality conditions. Then, the optimization theory solution collects a dataset of channel gains and corresponding optimal blocklengths. Finally, the Denoising Diffusion Probabilistic Model (DDPM) uses this collected dataset to train the resource allocation algorithm that generates optimal blocklength values conditioned on the channel state information (CSI). Via extensive simulations, the proposed approach is shown to outperform previously proposed Deep Reinforcement Learning (DRL) based approaches with close to optimal performance regarding total power consumption. Moreover, an improvement of up to eighteen-fold in the reduction of critical constraint violations is observed, further underscoring the accuracy of the solution. △ Less

Submitted 22 July, 2024; originally announced July 2024.

Comments: 5 pages, 4 figures

Event-Triggered Reinforcement Learning Based Joint Resource Allocation for Ultra-Reliable Low-Latency V2X Communications

Authors: Nasir Khan, Sinem Coleri

Abstract: Future 6G-enabled vehicular networks face the challenge of ensuring ultra-reliable low-latency communication (URLLC) for delivering safety-critical information in a timely manner. Existing resource allocation schemes for vehicle-to-everything (V2X) communication systems primarily rely on traditional optimization-based algorithms. However, these methods often fail to guarantee the strict reliabilit… ▽ More Future 6G-enabled vehicular networks face the challenge of ensuring ultra-reliable low-latency communication (URLLC) for delivering safety-critical information in a timely manner. Existing resource allocation schemes for vehicle-to-everything (V2X) communication systems primarily rely on traditional optimization-based algorithms. However, these methods often fail to guarantee the strict reliability and latency requirements of URLLC applications in dynamic vehicular environments due to the high complexity and communication overhead of the solution methodologies. This paper proposes a novel deep reinforcement learning (DRL) based framework for the joint power and block length allocation to minimize the worst-case decoding-error probability in the finite block length (FBL) regime for a URLLC-based downlink V2X communication system. The problem is formulated as a non-convex mixed-integer nonlinear programming problem (MINLP). Initially, an algorithm grounded in optimization theory is developed based on deriving the joint convexity of the decoding error probability in the block length and transmit power variables within the region of interest. Subsequently, an efficient event-triggered DRL-based algorithm is proposed to solve the joint optimization problem. Incorporating event-triggered learning into the DRL framework enables assessing whether to initiate the DRL process, thereby reducing the number of DRL process executions while maintaining reasonable reliability performance. Simulation results demonstrate that the proposed event-triggered DRL scheme can achieve 95% of the performance of the joint optimization scheme while reducing the DRL executions by up to 24% for different network settings. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Secure Hierarchical Federated Learning in Vehicular Networks Using Dynamic Client Selection and Anomaly Detection

Authors: M. Saeid HaghighiFard, Sinem Coleri

Abstract: Hierarchical Federated Learning (HFL) faces the significant challenge of adversarial or unreliable vehicles in vehicular networks, which can compromise the model's integrity through misleading updates. Addressing this, our study introduces a novel framework that integrates dynamic vehicle selection and robust anomaly detection mechanisms, aiming to optimize participant selection and mitigate risks… ▽ More Hierarchical Federated Learning (HFL) faces the significant challenge of adversarial or unreliable vehicles in vehicular networks, which can compromise the model's integrity through misleading updates. Addressing this, our study introduces a novel framework that integrates dynamic vehicle selection and robust anomaly detection mechanisms, aiming to optimize participant selection and mitigate risks associated with malicious contributions. Our approach involves a comprehensive vehicle reliability assessment, considering historical accuracy, contribution frequency, and anomaly records. An anomaly detection algorithm is utilized to identify anomalous behavior by analyzing the cosine similarity of local or model parameters during the federated learning (FL) process. These anomaly records are then registered and combined with past performance for accuracy and contribution frequency to identify the most suitable vehicles for each learning round. Dynamic client selection and anomaly detection algorithms are deployed at different levels, including cluster heads (CHs), cluster members (CMs), and the Evolving Packet Core (EPC), to detect and filter out spurious updates. Through simulation-based performance evaluation, our proposed algorithm demonstrates remarkable resilience even under intense attack conditions. Even in the worst-case scenarios, it achieves convergence times at $63$\% as effective as those in scenarios without any attacks. Conversely, in scenarios without utilizing our proposed algorithm, there is a high likelihood of non-convergence in the FL process. △ Less

Submitted 25 May, 2024; originally announced May 2024.

Teacher-Student Learning based Low Complexity Relay Selection in Wireless Powered Communications

Authors: Aysun Gurur Onalan, Berkay Kopru, Sinem Coleri

Abstract: Radio Frequency Energy Harvesting (RF-EH) networks are key enablers of massive Internet-of-things by providing controllable and long-distance energy transfer to energy-limited devices. Relays, helping either energy or information transfer, have been demonstrated to significantly improve the performance of these networks. This paper studies the joint relay selection, scheduling, and power control p… ▽ More Radio Frequency Energy Harvesting (RF-EH) networks are key enablers of massive Internet-of-things by providing controllable and long-distance energy transfer to energy-limited devices. Relays, helping either energy or information transfer, have been demonstrated to significantly improve the performance of these networks. This paper studies the joint relay selection, scheduling, and power control problem in multiple-source-multiple-relay RF-EH networks under nonlinear EH conditions. We first obtain the optimal solution to the scheduling and power control problem for the given relay selection. Then, the relay selection problem is formulated as a classification problem, for which two convolutional neural network (CNN) based architectures are proposed. While the first architecture employs conventional 2D convolution blocks and benefits from skip connections between layers; the second architecture replaces them with inception blocks, to decrease trainable parameter size without sacrificing accuracy for memory-constrained applications. To decrease the runtime complexity further, teacher-student learning is employed such that the teacher network is larger, and the student is a smaller size CNN-based architecture distilling the teacher's knowledge. A novel dichotomous search-based algorithm is employed to determine the best architecture for the student network. Our simulation results demonstrate that the proposed solutions provide lower complexity than the state-of-art iterative approaches without compromising optimality. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Hierarchical Federated Learning in Multi-hop Cluster-Based VANETs

Authors: M. Saeid HaghighiFard, Sinem Coleri

Abstract: The usage of federated learning (FL) in Vehicular Ad hoc Networks (VANET) has garnered significant interest in research due to the advantages of reducing transmission overhead and protecting user privacy by communicating local dataset gradients instead of raw data. However, implementing FL in VANETs faces challenges, including limited communication resources, high vehicle mobility, and the statist… ▽ More The usage of federated learning (FL) in Vehicular Ad hoc Networks (VANET) has garnered significant interest in research due to the advantages of reducing transmission overhead and protecting user privacy by communicating local dataset gradients instead of raw data. However, implementing FL in VANETs faces challenges, including limited communication resources, high vehicle mobility, and the statistical diversity of data distributions. In order to tackle these issues, this paper introduces a novel framework for hierarchical federated learning (HFL) over multi-hop clustering-based VANET. The proposed method utilizes a weighted combination of the average relative speed and cosine similarity of FL model parameters as a clustering metric to consider both data diversity and high vehicle mobility. This metric ensures convergence with minimum changes in cluster heads while tackling the complexities associated with non-independent and identically distributed (non-IID) data scenarios. Additionally, the framework includes a novel mechanism to manage seamless transitions of cluster heads (CHs), followed by transferring the most recent FL model parameter to the designated CH. Furthermore, the proposed approach considers the option of merging CHs, aiming to reduce their count and, consequently, mitigate associated overhead. Through extensive simulations, the proposed hierarchical federated learning over clustered VANET has been demonstrated to improve accuracy and convergence time significantly while maintaining an acceptable level of packet overhead compared to previously proposed clustering algorithms and non-clustered VANET. △ Less

Submitted 18 January, 2024; originally announced January 2024.

GANs for EVT Based Model Parameter Estimation in Real-time Ultra-Reliable Communication

Authors: Parmida Valiahdi, Sinem Coleri

Abstract: The Ultra-Reliable Low-Latency Communications (URLLC) paradigm in sixth-generation (6G) systems heavily relies on precise channel modeling, especially when dealing with rare and extreme events within wireless communication channels. This paper explores a novel methodology integrating Extreme Value Theory (EVT) and Generative Adversarial Networks (GANs) to achieve the precise channel modeling in re… ▽ More The Ultra-Reliable Low-Latency Communications (URLLC) paradigm in sixth-generation (6G) systems heavily relies on precise channel modeling, especially when dealing with rare and extreme events within wireless communication channels. This paper explores a novel methodology integrating Extreme Value Theory (EVT) and Generative Adversarial Networks (GANs) to achieve the precise channel modeling in real-time. The proposed approach harnesses EVT by employing the Generalized Pareto Distribution (GPD) to model the distribution of extreme events. Subsequently, Generative Adversarial Networks (GANs) are employed to estimate the parameters of the GPD. In contrast to conventional GAN configurations that focus on estimating the overall distribution, the proposed approach involves the incorporation of an additional block within the GAN structure. This specific augmentation is designed with the explicit purpose of directly estimating the parameters of the Generalized Pareto Distribution (GPD). Through extensive simulations across different sample sizes, the proposed GAN based approach consistently demonstrates superior adaptability, surpassing Maximum Likelihood Estimation (MLE), particularly in scenarios with limited sample sizes. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Incorporation of Confidence Interval into Rate Selection Based on the Extreme Value Theory for Ultra-Reliable Communications

Authors: Niloofar Mehrnia, Sinem Coleri

Abstract: Proper determination of the transmission rate in ultra-reliable low latency communication (URLLC) needs to incorporate a confidence interval (CI) for the estimated parameters due to the large amount of data required for their accurate estimation. In this paper, we propose a framework based on the extreme value theory (EVT) for determining the transmission rate along with its corresponding CI for a… ▽ More Proper determination of the transmission rate in ultra-reliable low latency communication (URLLC) needs to incorporate a confidence interval (CI) for the estimated parameters due to the large amount of data required for their accurate estimation. In this paper, we propose a framework based on the extreme value theory (EVT) for determining the transmission rate along with its corresponding CI for an ultra-reliable communication system. This framework consists of characterizing the statistics of extreme events by fitting the generalized Pareto distribution (GPD) to the channel tail, deriving the GPD parameters and their associated CIs, and obtaining the transmission rate within a confidence interval. Based on the data collected within the engine compartment of Fiat Linea, we demonstrate the accuracy of the estimated rate obtained through the EVT-based framework considering the confidence interval for the GPD parameters. Additionally, we show that proper estimation of the transmission rate based on the proposed framework requires a lower number of samples compared to the traditional extrapolation-based approaches. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 6 pages, 5 figures including 14 subfigures

Journal ref: 2022 Joint European Conference on Networks and Communications & 6G Summit (EuCNC/6G Summit), Grenoble, France, 2022, pp. 118-123

Extreme Value Theory Based Rate Selection for Ultra-Reliable Communications

Authors: Niloofar Mehrnia, Sinem Coleri

Abstract: Ultra-reliable low latency communication (URLLC) requires the packet error rate to be on the order of $10^{-9}$-$10^{-5}$. Determining the appropriate transmission rate to satisfy this ultra-reliability constraint requires deriving the statistics of the channel in the ultra-reliable region and then incorporating these statistics into the rate selection. In this paper, we propose a framework for de… ▽ More Ultra-reliable low latency communication (URLLC) requires the packet error rate to be on the order of $10^{-9}$-$10^{-5}$. Determining the appropriate transmission rate to satisfy this ultra-reliability constraint requires deriving the statistics of the channel in the ultra-reliable region and then incorporating these statistics into the rate selection. In this paper, we propose a framework for determining the rate selection for ultra-reliable communications based on the extreme value theory (EVT). We first model the wireless channel at URLLC by estimating the parameters of the generalized Pareto distribution (GPD) best fitting to the tail distribution of the received powers, i.e., the power values below a certain threshold. Then, we determine the maximum transmission rate by incorporating the Pareto distribution into the rate selection function. Finally, we validate the selected rate by computing the resulting error probability. Based on the data collected within the engine compartment of Fiat Linea, we demonstrate the superior performance of the proposed methodology in determining the maximum transmission rate compared to the traditional extrapolation-based approaches. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures including 7 subfigures

Journal ref: in IEEE Transactions on Vehicular Technology, vol. 71, no. 6, pp. 6727-6731, June 2022

Multivariate Extreme Value Theory Based Channel Modeling for Ultra-Reliable Communications

Authors: Niloofar Mehrnia, Sinem Coleri

Abstract: Attaining ultra-reliable communication (URC) in fifth-generation (5G) and beyond networks requires deriving statistics of channel in ultra-reliable region by modeling the extreme events. Extreme value theory (EVT) has been previously adopted in channel modeling to characterize the lower tail of received powers in URC systems. In this paper, we propose a multivariate EVT (MEVT)-based channel modeli… ▽ More Attaining ultra-reliable communication (URC) in fifth-generation (5G) and beyond networks requires deriving statistics of channel in ultra-reliable region by modeling the extreme events. Extreme value theory (EVT) has been previously adopted in channel modeling to characterize the lower tail of received powers in URC systems. In this paper, we propose a multivariate EVT (MEVT)-based channel modeling methodology for tail of the joint distribution of multi-channel by characterizing the multivariate extremes of multiple-input multiple-output (MIMO) system. The proposed approach derives lower tail statistics of received power of each channel by using the generalized Pareto distribution (GPD). Then, tail of the joint distribution is modeled as a function of estimated GPD parameters based on two approaches: logistic distribution, which utilizes logistic distribution to determine dependency factors among the Frechet transformed tail sequence and obtain a bi-variate extreme value model, and Poisson point process, which estimates probability measure function of the Pickands angular component to model bi-variate extreme values. Finally, validity of the proposed models is assessed by incorporating the mean constraint on probability measure function of Pichanks coordinates. Based on the data collected within the engine compartment of Fiat Linea, we demonstrate the superiority of proposed methodology compared to the conventional extrapolation-based methods in providing the best fit to the multivariate extremes. △ Less

Submitted 11 January, 2024; originally announced January 2024.

Comments: 13 pages, 6 figures

Journal ref: IEEE Transactions on Wireless Communications

Multivariate Extreme Value Theory Based Rate Selection for Ultra-Reliable Communications

Authors: Niloofar Mehrnia, Sinem Coleri

Abstract: Diversity schemes play a vital role in improving the performance of ultra-reliable communication systems by transmitting over two or more communication channels to combat fading and co-channel interference. Determining an appropriate transmission strategy that satisfies ultra-reliability constraint necessitates derivation of statistics of channel in ultra-reliable region and, subsequently, integra… ▽ More Diversity schemes play a vital role in improving the performance of ultra-reliable communication systems by transmitting over two or more communication channels to combat fading and co-channel interference. Determining an appropriate transmission strategy that satisfies ultra-reliability constraint necessitates derivation of statistics of channel in ultra-reliable region and, subsequently, integration of these statistics into rate selection while incorporating a confidence interval to account for potential uncertainties that may arise during estimation. In this paper, we propose a novel framework for ultra-reliable real-time transmission considering both spatial diversities and ultra-reliable channel statistics based on multivariate extreme value theory. First, tail distribution of joint received power sequences obtained from different receivers is modeled while incorporating inter-relations of extreme events occurring rarely based on Poisson point process approach in MEVT. The optimum transmission strategies are then developed by determining optimum transmission rate based on estimated joint tail distribution and incorporating confidence intervals into estimations to cope with the availability of limited data. Finally, system reliability is assessed by utilizing outage probability metric. Through analysis of data obtained from the engine compartment of Fiat Linea, our study showcases the effectiveness of proposed methodology in surpassing traditional extrapolation-based approaches. This innovative method not only achieves a higher transmission rate, but also effectively addresses stringent requirements of ultra-reliability. The findings indicate that proposed rate selection framework offers a viable solution for achieving a desired target error probability by employing a higher transmission rate and reducing the amount of training data compared to conventional rate selection methods. △ Less

Submitted 11 January, 2024; v1 submitted 10 January, 2024; originally announced January 2024.

Comments: 11 pages, 6 figures, submitted to the IEEE Transactions on Vehicular Technology (TVT)

Wireless 6G Connectivity for Massive Number of Devices and Critical Services

Authors: Anders E. Kalør, Giuseppe Durisi, Sinem Coleri, Stefan Parkvall, Wei Yu, Andreas Mueller, Petar Popovski

Abstract: Compared to the generations up to 4G, whose main focus was on broadband and coverage aspects, 5G has expanded the scope of wireless cellular systems towards embracing two new types of connectivity: massive machine-type communication (mMTC) and ultra-reliable low-latency communications (URLLC). This paper will discuss the possible evolution of these two types of connectivity within the umbrella of… ▽ More Compared to the generations up to 4G, whose main focus was on broadband and coverage aspects, 5G has expanded the scope of wireless cellular systems towards embracing two new types of connectivity: massive machine-type communication (mMTC) and ultra-reliable low-latency communications (URLLC). This paper will discuss the possible evolution of these two types of connectivity within the umbrella of 6G wireless systems. The paper consists of three parts. The first part deals with the connectivity for a massive number of devices. While mMTC research in 5G was predominantly focused on the problem of uncoordinated access in the uplink for a large number of devices, the traffic patterns in 6G may become more symmetric, leading to closed-loop massive connectivity. One of the drivers for this is distributed learning/inference. The second part of the paper will discuss the evolution of wireless connectivity for critical services. While latency and reliability are tightly coupled in 5G, 6G will support a variety of safety critical control applications with different types of timing requirements, as evidenced by the emergence of metrics related to information freshness and information value. Additionally, ensuring ultra-high reliability for safety critical control applications requires modeling and estimation of the tail statistics of the wireless channel, queue length, and delay. The fulfillment of these stringent requirements calls for the development of novel AI-based techniques, incorporating optimization theory, explainable AI, generative AI and digital twins. The third part will analyze the coexistence of massive connectivity and critical services. We will consider scenarios in which a massive number of devices need to support traffic patterns of mixed criticality. This will be followed by a discussion about the management of wireless resources shared by services with different criticality. △ Less

Submitted 1 June, 2024; v1 submitted 2 January, 2024; originally announced January 2024.

Comments: 19 pages, 8 figures

A Unified Framework for Multi-Hop Wireless Relaying with Hardware Impairments

Authors: Ehsan Soleimani-Nasab, Sinem Coleri

Abstract: Relaying increases the coverage area and reliability of wireless communications systems by mitigating the fading effect on the received signal. Most technical contributions in the context of these systems assume ideal hardware (ID) by neglecting the non-idealities of the transceivers, which include phase noise, in-phase/quadrature mismatch and high power amplifier nonlinearities. These non-idealit… ▽ More Relaying increases the coverage area and reliability of wireless communications systems by mitigating the fading effect on the received signal. Most technical contributions in the context of these systems assume ideal hardware (ID) by neglecting the non-idealities of the transceivers, which include phase noise, in-phase/quadrature mismatch and high power amplifier nonlinearities. These non-idealities create distortion on the received signal by causing variations in the phase and attenuating the amplitude. The resulting deterioration of the performance of wireless communication systems is further magnified as the frequency of transmission increases. In this paper, we investigate the aggregate impact of hardware impairments (HI) on the general multi-hop relay system using amplify-and-forward (AF) and decode-and-forward (DF) relaying techniques over a general H-fading model. H-fading model includes free space optics, radio frequency, millimeter wave, Terahertz, and underwater fading models. Closed-form expressions of outage probability, bit error probability and ergodic capacity are derived in terms of H-functions. Following an asymptotic analysis at high signal-to-noise ratio (SNR), practical optimization problems have been formulated with the objective of finding the optimal level of HI subject to the limitation on the total HI level. The analytical solution has been derived for the Nakagami-m fading channel which is a special case of H-fading for AF and DF relaying techniques. The overall instantaneous signal-to-noise-plus-distortion ratio has been demonstrated to reach a ceiling at high SNRs which has a reciprocal proportion to the HI level of all hops transceivers on the contrary to the ID. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Comments: 16 pages, 10 figures, journal paper

Optimization Theory Based Deep Reinforcement Learning for Resource Allocation in Ultra-Reliable Wireless Networked Control Systems

Authors: Hamida Qumber Ali, Amirhassan Babazadeh Darabi, Sinem Coleri

Abstract: The design of Wireless Networked Control System (WNCS) requires addressing critical interactions between control and communication systems with minimal complexity and communication overhead while providing ultra-high reliability. This paper introduces a novel optimization theory based deep reinforcement learning (DRL) framework for the joint design of controller and communication systems. The obje… ▽ More The design of Wireless Networked Control System (WNCS) requires addressing critical interactions between control and communication systems with minimal complexity and communication overhead while providing ultra-high reliability. This paper introduces a novel optimization theory based deep reinforcement learning (DRL) framework for the joint design of controller and communication systems. The objective of minimum power consumption is targeted while satisfying the schedulability and rate constraints of the communication system in the finite blocklength regime and stability constraint of the control system. Decision variables include the sampling period in the control system, and blocklength and packet error probability in the communication system. The proposed framework contains two stages: optimization theory and DRL. In the optimization theory stage, following the formulation of the joint optimization problem, optimality conditions are derived to find the mathematical relations between the optimal values of the decision variables. These relations allow the decomposition of the problem into multiple building blocks. In the DRL stage, the blocks that are simplified but not tractable are replaced by DRL. Via extensive simulations, the proposed optimization theory based DRL approach is demonstrated to outperform the optimization theory and pure DRL based approaches, with close to optimal performance and much lower complexity. △ Less

Submitted 19 December, 2023; v1 submitted 28 November, 2023; originally announced November 2023.

Comments: 14 pages, 11 figures

Performance Analysis of OTSM under Hardware Impairments and Imperfect CSI

Authors: Abed Doosti-Aref, Christos Masouros, Xu Zhu, Ertugrul Basar, Sinem Coleri, Huseyin Arslan

Abstract: Orthogonal time sequency multiplexing (OTSM) has been recently proposed as a single-carrier waveform offering similar bit error rate to orthogonal time frequency space (OTFS) and outperforms orthogonal frequency division multiplexing (OFDM) in doubly-spread channels (DSCs); however, with a much lower complexity making it a potential candidate for 6G wireless networks. In this paper, the performanc… ▽ More Orthogonal time sequency multiplexing (OTSM) has been recently proposed as a single-carrier waveform offering similar bit error rate to orthogonal time frequency space (OTFS) and outperforms orthogonal frequency division multiplexing (OFDM) in doubly-spread channels (DSCs); however, with a much lower complexity making it a potential candidate for 6G wireless networks. In this paper, the performance of OTSM is explored by considering the joint effects of multiple hardware impairments (HWIs) such as in-phase and quadrature imbalance (IQI), direct current offset (DCO), phase noise, power amplifier non-linearity, carrier frequency offset, and synchronization timing offset for the first time in the area. First, the discrete-time baseband signal model is obtained in vector form under all mentioned HWIs. Second, the system input-output relations are derived in time, delay-time, and delay-sequency (DS) domains in which the parameters of all mentioned HWIs are incorporated. Third, analytical expressions are derived for the pairwise and average bit error probability under imperfect channel state information (CSI) as a function of the parameters of all mentioned HWIs. Analytical results demonstrate that under all mentioned HWIs, noise stays additive white Gaussian, effective channel matrix is sparse, DCO appears as a DC signal at the receiver interfering with only the zero sequency, and IQI redounds to self-conjugated sequency interference in the DS domain. Simulation results reveal the fact that by considering the joint effects of all mentioned HWIs and imperfect CSI not only OTSM outperforms OFDM by 29% in terms of energy of bit per noise but it performs same as OTFS in high mobility DSCs. △ Less

Submitted 22 April, 2024; v1 submitted 8 September, 2023; originally announced September 2023.

Journal ref: IEEE Transactions on Vehicular Technology, Early Access, 2024

Federated Channel Learning for Intelligent Reflecting Surfaces With Fewer Pilot Signals

Authors: Ahmet M. Elbir, Sinem Coleri, Kumar Vijay Mishra

Abstract: Channel estimation is a critical task in intelligent reflecting surface (IRS)-assisted wireless systems due to the uncertainties imposed by environment dynamics and rapid changes in the IRS configuration. To deal with these uncertainties, deep learning (DL) approaches have been proposed. Previous works consider centralized learning (CL) approach for model training, which entails the collection of… ▽ More Channel estimation is a critical task in intelligent reflecting surface (IRS)-assisted wireless systems due to the uncertainties imposed by environment dynamics and rapid changes in the IRS configuration. To deal with these uncertainties, deep learning (DL) approaches have been proposed. Previous works consider centralized learning (CL) approach for model training, which entails the collection of the whole training dataset from the users at the base station (BS), hence introducing huge transmission overhead for data collection. To address this challenge, this paper proposes a federated learning (FL) framework to jointly estimate both direct and cascaded channels in IRS-assisted wireless systems. We design a single convolutional neural network trained on the local datasets of the users without sending them to the BS. We show that the proposed FL-based channel estimation approach requires approximately 60% fewer pilot signals and it exhibits 12 times lower transmission overhead than CL, while maintaining satisfactory performance close to CL. In addition, it provides lower estimation error than the state-of-the-art DL-based schemes. △ Less

Submitted 6 May, 2022; originally announced May 2022.

Comments: 5pages2figures Accepted paper in IEEE SAM 2022. arXiv admin note: substantial text overlap with arXiv:2008.10846

Journal ref: 2022 IEEE 12th Sensor Array and Multichannel Signal Processing Workshop (SAM)

Vehicular Visible Light Communications for Automated Valet Parking

Authors: Bugra Turan, Ali Uyrus, Osman Nuri Koc, Emrah Kar, Sinem Coleri

Abstract: Visible light communication (VLC) is a promising Optical Wireless Communications (OWC) scheme that is demonstrated to provide secure, line-of-sight (LoS), and short-distance vehicle-to-vehicle (V2V) and vehicle-to-infrastructure(V2I) communications. Recently, automated driving applications, supported by V2I links are proposed to increase the reliability of the autonomous vehicles. To this regard,… ▽ More Visible light communication (VLC) is a promising Optical Wireless Communications (OWC) scheme that is demonstrated to provide secure, line-of-sight (LoS), and short-distance vehicle-to-vehicle (V2V) and vehicle-to-infrastructure(V2I) communications. Recently, automated driving applications, supported by V2I links are proposed to increase the reliability of the autonomous vehicles. To this regard, we propose a VLCbased V2I scheme to increase the V2I communication redundancy of autonomous valet parking (AVP) applications, through jam-free and location-based characteristics of VLC. In this paper, we demonstrate a novel architecture to support indoor parking-garage online-map update with vehicle on-board data transmissions and location-based map update dissemination through bidirectional VLC communications. The proposed system yields error-free LoS transmissions with Direct Current Biased Optical OFDM (DCO-OFDM) up to 33 m transmitter-receiver distance enabling vehicle CAN Bus data, infrastructure camera video, and LIDAR point cloud data sharing in an indoor parking garage. △ Less

Submitted 20 November, 2021; originally announced February 2022.

Comments: 2 pages, 2 figures, 1 table

Vehicular Visible Light Communications Noise Analysis and Autoencoder Based Denoising

Authors: Bugra Turan, O. Nuri Koc, Emrah Kar, Sinem Coleri

Abstract: Vehicular visible light communications (V-VLC) is a promising intelligent transportation systems (ITS) technology for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications with the utilization of light-emitting diodes (LEDs). The main degrading factor for the performance of V-VLC systems is noise. Unlike traditional radio frequency (RF) based systems, V-VLC systems include ma… ▽ More Vehicular visible light communications (V-VLC) is a promising intelligent transportation systems (ITS) technology for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications with the utilization of light-emitting diodes (LEDs). The main degrading factor for the performance of V-VLC systems is noise. Unlike traditional radio frequency (RF) based systems, V-VLC systems include many noise sources: solar radiation, background lighting from vehicles, streets, parking garages, and tunnel lights. Traditional V-VLC system noise modeling is based on the additive white Gaussian noise assumption in the form of shot and thermal noise. In this paper, to investigate both time-correlated and white noise components of the V-VLC channel, we propose a noise analysis based on Allan variance (AVAR), which provides a time-series analysis method to identify noise from the data. We also propose a generalized Wiener process-based V-VLC channel noise synthesis methodology to generate different noise components. We further propose a convolutional autoencoder(CAE) based denoising scheme to reduce V-VLC signal noise, which achieves reconstruction root mean square error (RMSE) of 0.0442 and 0.0474 for indoor and outdoor channels, respectively. △ Less

Submitted 20 November, 2021; originally announced November 2021.

Comments: Conference, 4 figures, 6 pages

A Hybrid Architecture for Federated and Centralized Learning

Authors: Ahmet M. Elbir, Sinem Coleri, Anastasios K. Papazafeiropoulos, Pandelis Kourtessis, Symeon Chatzinotas

Abstract: Many of the machine learning tasks rely on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) entailing huge communication overhead. To overcome this, federated learning (FL) has been suggested as a promising tool, wherein the clients send only the model updates to the PS instead of the whole dataset. However, FL demands powerfu… ▽ More Many of the machine learning tasks rely on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) entailing huge communication overhead. To overcome this, federated learning (FL) has been suggested as a promising tool, wherein the clients send only the model updates to the PS instead of the whole dataset. However, FL demands powerful computational resources from the clients. In practice, not all the clients have sufficient computational resources to participate in training. To address this common scenario, we propose a more efficient approach called hybrid federated and centralized learning (HFCL), wherein only the clients with sufficient resources employ FL, while the remaining ones send their datasets to the PS, which computes the model on behalf of them. Then, the model parameters are aggregated at the PS. To improve the efficiency of dataset transmission, we propose two different techniques: i) increased computation-per-client and ii) sequential data transmission. Notably, the HFCL frameworks outperform FL with up to 20\% improvement in the learning accuracy when only half of the clients perform FL while having 50\% less communication overhead than CL since all the clients collaborate on the learning process with their datasets. △ Less

Submitted 1 June, 2022; v1 submitted 7 May, 2021; originally announced May 2021.

Comments: Accepted paper in IEEE Transactions on Cognitive Communications and Networking

Federated Dropout Learning for Hybrid Beamforming With Spatial Path Index Modulation In Multi-User mmWave-MIMO Systems

Authors: Ahmet M. Elbir, Sinem Coleri, Kumar Vijay Mishra

Abstract: Millimeter wave multiple-input multiple-output (mmWave-MIMO) systems with small number of radio-frequency (RF) chains have limited multiplexing gain. Spatial path index modulation (SPIM) is helpful in improving this gain by utilizing additional signal bits modulated by the indices of spatial paths. In this paper, we introduce model-based and model-free frameworks for beamformer design in multi-use… ▽ More Millimeter wave multiple-input multiple-output (mmWave-MIMO) systems with small number of radio-frequency (RF) chains have limited multiplexing gain. Spatial path index modulation (SPIM) is helpful in improving this gain by utilizing additional signal bits modulated by the indices of spatial paths. In this paper, we introduce model-based and model-free frameworks for beamformer design in multi-user SPIM-MIMO systems. We first design the beamformers via model-based manifold optimization algorithm. Then, we leverage federated learning (FL) with dropout learning (DL) to train a learning model on the local dataset of users, who estimate the beamformers by feeding the model with their channel data. The DL randomly selects different set of model parameters during training, thereby further reducing the transmission overhead compared to conventional FL. Numerical experiments show that the proposed framework exhibits higher spectral efficiency than the state-of-the-art SPIM-MIMO methods and mmWave-MIMO, which relies on the strongest propagation path. Furthermore, the proposed FL approach provides at least 10 times lower transmission overhead than the centralized learning techniques. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Comments: Accepted paper in 2021 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Toronto, Canada, June 2021

Hybrid Federated and Centralized Learning

Authors: Ahmet M. Elbir, Sinem Coleri, Kumar Vijay Mishra

Abstract: Many of the machine learning (ML) tasks are focused on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) leading to a huge communication overhead. Federated learning (FL) overcomes this issue by allowing the clients to send only the model updates to the PS instead of the whole dataset. In this way, FL brings the learning to edg… ▽ More Many of the machine learning (ML) tasks are focused on centralized learning (CL), which requires the transmission of local datasets from the clients to a parameter server (PS) leading to a huge communication overhead. Federated learning (FL) overcomes this issue by allowing the clients to send only the model updates to the PS instead of the whole dataset. In this way, FL brings the learning to edge level, wherein powerful computational resources are required on the client side. This requirement may not always be satisfied because of diverse computational capabilities of edge devices. We address this through a novel hybrid federated and centralized learning (HFCL) framework to effectively train a learning model by exploiting the computational capability of the clients. In HFCL, only the clients who have sufficient resources employ FL; the remaining clients resort to CL by transmitting their local dataset to PS. This allows all the clients to collaborate on the learning process regardless of their computational resources. We also propose a sequential data transmission approach with HFCL (HFCL-SDT) to reduce the training duration. The proposed HFCL frameworks outperform previously proposed non-hybrid FL (CL) based schemes in terms of learning accuracy (communication overhead) since all the clients collaborate on the learning process with their datasets regardless of their computational resources. △ Less

Submitted 15 February, 2021; v1 submitted 13 November, 2020; originally announced November 2020.

Comments: 5pages4figures. This work has been submitted to the IEEE for publication

Vehicular Networks for Combating a Worldwide Pandemic: Preventing the Spread of COVID-19

Authors: Ahmet M. Elbir, Gokhan Gurbilek, Burak Soner, Anastasios K. Papazafeiropoulos, Pandelis Kourtessis, Sinem Coleri

Abstract: As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Ther… ▽ More As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Therefore, researchers recently started developing ideas to stop or at least reduce the spread of the pandemic. While there have been some prior works on wireless networks for combating a pandemic scenario, vehicular networks and their potential bottlenecks have not yet been fully examined. Furthermore, the vehicular scenarios can be identified as the locations, where the social distancing is mostly violated. With this motivation, this article provides an extensive discussion on vehicular networking for combating a pandemic. We provide the major applications of vehicular networking for combating COVID-19 in public transportation, in-vehicle diagnosis, border patrol and social distance monitoring. Next, we identify the unique characteristics of the collected data in terms of privacy, flexibility and coverage, then highlight corresponding future directions in privacy preservation, resource allocation, data caching and data routing. We believe that this work paves the way for the development of new products and algorithms that can facilitate the social life and help controlling the spread of the pandemic. △ Less

Submitted 11 October, 2022; v1 submitted 15 October, 2020; originally announced October 2020.

Comments: Accepted Paper in Smart Health

Federated Learning for Channel Estimation in Conventional and RIS-Assisted Massive MIMO

Authors: Ahmet M. Elbir, Sinem Coleri

Abstract: Machine learning (ML) has attracted a great research interest for physical layer design problems, such as channel estimation, thanks to its low complexity and robustness. Channel estimation via ML requires model training on a dataset, which usually includes the received pilot signals as input and channel data as output. In previous works, model training is mostly done via centralized learning (CL)… ▽ More Machine learning (ML) has attracted a great research interest for physical layer design problems, such as channel estimation, thanks to its low complexity and robustness. Channel estimation via ML requires model training on a dataset, which usually includes the received pilot signals as input and channel data as output. In previous works, model training is mostly done via centralized learning (CL), where the whole training dataset is collected from the users at the base station (BS). This approach introduces huge communication overhead for data collection. In this paper, to address this challenge, we propose a federated learning (FL) framework for channel estimation. We design a convolutional neural network (CNN) trained on the local datasets of the users without sending them to the BS. We develop FL-based channel estimation schemes for both conventional and RIS (intelligent reflecting surface) assisted massive MIMO (multiple-input multiple-output) systems, where a single CNN is trained for two different datasets for both scenarios. We evaluate the performance for noisy and quantized model transmission and show that the proposed approach provides approximately 16 times lower overhead than CL, while maintaining satisfactory performance close to CL. Furthermore, the proposed architecture exhibits lower estimation error than the state-of-the-art ML-based schemes. △ Less

Submitted 15 November, 2021; v1 submitted 25 August, 2020; originally announced August 2020.

Comments: Accepted paper in IEEE Transactions on Wireless Communications

Federated Learning in Vehicular Networks

Authors: Ahmet M. Elbir, Burak Soner, Sinem Coleri, Deniz Gunduz, Mehdi Bennis

Abstract: Machine learning (ML) has recently been adopted in vehicular networks for applications such as autonomous driving, road safety prediction and vehicular object detection, due to its model-free characteristic, allowing adaptive fast response. However, most of these ML applications employ centralized learning (CL), which brings significant overhead for data transmission between the parameter server a… ▽ More Machine learning (ML) has recently been adopted in vehicular networks for applications such as autonomous driving, road safety prediction and vehicular object detection, due to its model-free characteristic, allowing adaptive fast response. However, most of these ML applications employ centralized learning (CL), which brings significant overhead for data transmission between the parameter server and vehicular edge devices. Federated learning (FL) framework has been recently introduced as an efficient tool with the goal of reducing transmission overhead while achieving privacy through the transmission of model updates instead of the whole dataset. In this paper, we investigate the usage of FL over CL in vehicular network applications to develop intelligent transportation systems. We provide a comprehensive analysis on the feasibility of FL for the ML based vehicular applications, as well as investigating object detection by utilizing image-based datasets as a case study. Then, we identify the major challenges from both learning perspective, i.e., data labeling and model training, and from the communications point of view, i.e., data rate, reliability, transmission overhead, privacy and resource management. Finally, we highlight related future research directions for FL in vehicular networks. △ Less

Submitted 16 July, 2022; v1 submitted 2 June, 2020; originally announced June 2020.

Comments: 2022 IEEE International Mediterranean Conference on Communications and Networking (MeditCom)

Federated Learning for Hybrid Beamforming in mm-Wave Massive MIMO

Authors: Ahmet M. Elbir, Sinem Coleri

Abstract: Machine learning for hybrid beamforming has been extensively studied by using centralized machine learning (CML) techniques, which require the training of a global model with a large dataset collected from the users. However, the transmission of the whole dataset between the users and the base station (BS) is computationally prohibitive due to limited communication bandwidth and privacy concerns.… ▽ More Machine learning for hybrid beamforming has been extensively studied by using centralized machine learning (CML) techniques, which require the training of a global model with a large dataset collected from the users. However, the transmission of the whole dataset between the users and the base station (BS) is computationally prohibitive due to limited communication bandwidth and privacy concerns. In this work, we introduce a federated learning (FL) based framework for hybrid beamforming, where the model training is performed at the BS by collecting only the gradients from the users. We design a convolutional neural network, in which the input is the channel data, yielding the analog beamformers at the output. Via numerical simulations, FL is demonstrated to be more tolerant to the imperfections and corruptions in the channel data as well as having less transmission overhead than CML. △ Less

Submitted 22 August, 2020; v1 submitted 20 May, 2020; originally announced May 2020.

Comments: Accepted in IEEE Communications Letters

Minimum Length Scheduling for Discrete-Rate Full-Duplex Wireless Powered Communication Networks

Authors: Muhammad Shahid Iqbal, Yalcin Sadi, Sinem Coleri

Abstract: In this paper, we consider a wireless powered communication network where multiple users with RF energy harvesting capabilities communicate to a hybrid energy and information access point (HAP) in full-duplex mode. Each user has to transmit a certain amount of data with a transmission rate from a finite set of discrete rate levels, using the energy initially available in its battery and the energy… ▽ More In this paper, we consider a wireless powered communication network where multiple users with RF energy harvesting capabilities communicate to a hybrid energy and information access point (HAP) in full-duplex mode. Each user has to transmit a certain amount of data with a transmission rate from a finite set of discrete rate levels, using the energy initially available in its battery and the energy it can harvest until the end of its transmission. Considering this model, we propose a novel discrete rate based minimum length scheduling problem to determine the optimal power control, rate adaptation and transmission schedule subject to data, energy causality and maximum transmit power constraints. The proposed optimization problem is proven to be NP-hard which requires exponential-time algorithms to solve for the global optimum. As a solution strategy, first, we demonstrate that the power control and rate adaptation, and scheduling problems can be solved separately in the optimal solution. For the power control and rate adaptation problem, we derive the optimal solution based on the proposed minimum length scheduling slot definition. For the scheduling, we classify the problem based on the distribution of minimum length scheduling slots of the users over time. For the non-overlapping slots scenario, we present the optimal scheduling algorithm. For the overlapping scenario, we propose a polynomial-time heuristic scheduling algorithm. △ Less

Submitted 13 February, 2020; originally announced February 2020.

Machine Learning Based Channel Modeling for Vehicular Visible Light Communication

Authors: Bugra Turan, Sinem Coleri

Abstract: Optical Wireless Communication (OWC) propagation channel characterization plays a key role on the design and performance analysis of Vehicular Visible Light Communication (VVLC) systems. Current OWC channel models based on deterministic and stochastic methods, fail to address mobility induced ambient light, optical turbulence and road reflection effects on channel characterization. Therefore, alte… ▽ More Optical Wireless Communication (OWC) propagation channel characterization plays a key role on the design and performance analysis of Vehicular Visible Light Communication (VVLC) systems. Current OWC channel models based on deterministic and stochastic methods, fail to address mobility induced ambient light, optical turbulence and road reflection effects on channel characterization. Therefore, alternative machine learning (ML) based schemes, considering ambient light, optical turbulence, road reflection effects in addition to intervehicular distance and geometry, are proposed to obtain accurate VVLC channel loss and channel frequency response (CFR). This work demonstrates synthesis of ML based VVLC channel model frameworks through multi layer perceptron feed-forward neural network (MLP), radial basis function neural network (RBF-NN) and Random Forest ensemble learning algorithms. Predictor and response variables, collected through practical road measurements, are employed to train and validate proposed models for various conditions. Additionally, the importance of different predictor variables on channel loss and CFR is assessed, normalized importance of features for measured VVLC channel is introduced. We show that RBF-NN, Random Forest and MLP based models yield more accurate channel loss estimations with 3.53 dB, 3.81 dB, 3.95 dB root mean square error (RMSE), respectively, when compared to fitting curve based VVLC channel model with 7 dB RMSE. Moreover, RBF-NN and MLP models are demonstrated to predict VVLC CFR with respect to distance, ambient light and receiver inclination angle predictor variables with 3.78 dB and 3.60 dB RMSE respectively. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Comments: 14 pages, 11 figures

MSC Class: 94 ACM Class: I.m

Relay Selection, Scheduling and Power Control in Wireless Powered Cooperative Communication Networks

Authors: Aysun Gurur Onalan, Elif Dilek Salik, Sinem Coleri

Abstract: Relay nodes are used to improve the throughput, delay and reliability performance of energy harvesting networks by assisting both energy and information transfer between information nodes and access point. Previous studies on radio frequency energy harvesting networks are limited to single source single/multiple relay networks. In this paper, a novel joint relay selection, scheduling and power con… ▽ More Relay nodes are used to improve the throughput, delay and reliability performance of energy harvesting networks by assisting both energy and information transfer between information nodes and access point. Previous studies on radio frequency energy harvesting networks are limited to single source single/multiple relay networks. In this paper, a novel joint relay selection, scheduling and power control problem for multiple source multiple relay network is formulated with the objective of minimizing the total duration of wireless power and information transfer. The formulated problem is non-convex mixed-integer non-linear programming problem, and proven to be NP-hard. We first formulate a sub-problem on scheduling and power control for a given relay selection. We propose an efficient optimal algorithm based on a bi-level optimization over power transfer time allocation. Then, for optimal relay selection, we present optimal exponential-time Branch-and-Bound (BB) based algorithm where the nodes are pruned with problem specific lower and upper bounds. We also provide two BB-based heuristic approaches limiting the number of branches generated from a BB-node, and a relay criterion based lower complexity heuristic algorithm. The performance of the proposed algorithms are demonstrated to outperform conventional harvest-then-cooperate approaches with up to $88\%$ lower schedule length for various network settings. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Minimum Length Scheduling for Full Duplex Time-Critical Wireless Powered Communication Networks

Authors: Muhammad Shahid Iqbal, Yalcin Sadi, Sinem Coleri

Abstract: Radio frequency (RF) energy harvesting is key in attaining perpetual lifetime for time-critical wireless powered communication networks due to full control on energy transfer, far field region, small and low-cost circuitry. In this paper, we propose a novel minimum length scheduling problem to determine the optimal power control, time allocation and transmission schedule subject to data, energy ca… ▽ More Radio frequency (RF) energy harvesting is key in attaining perpetual lifetime for time-critical wireless powered communication networks due to full control on energy transfer, far field region, small and low-cost circuitry. In this paper, we propose a novel minimum length scheduling problem to determine the optimal power control, time allocation and transmission schedule subject to data, energy causality and maximum transmit power constraints in a full-duplex wireless powered communication network. We first formulate the problem as a mixed integer non-linear programming problem and conjecture that the problem is NP-hard. As a solution strategy, we demonstrate that the power control and time allocation, and scheduling problems can be solved separately in the optimal solution. For the power control and time allocation problem, we derive the optimal solution by using Karush-Kuhn-Tucker conditions. For the scheduling, we introduce a penalty function allowing reformulation as a sum penalty minimization problem. Upon derivation of the optimality conditions based on the characteristics of the penalty function, we propose two polynomial-time heuristic algorithms and a reduced-complexity exact algorithm employing smart pruning techniques. Via extensive simulations, we illustrate that the proposed heuristic schemes outperform the previously proposed schemes for predetermined transmission order of users and achieve close-to-optimal solutions. △ Less

Submitted 21 June, 2020; v1 submitted 3 February, 2020; originally announced February 2020.

Comments: accepted in IEEE Transactions on Wireless Communications and will appear in the future issue

Empirical Feasibility Analysis for Energy Harvesting Intra-Vehicular Wireless Sensor Networks

Authors: Mertkan Koca, Gokhan Gurbilek, Burak Soner, Sinem Coleri

Abstract: Vehicle electronic systems currently utilize wired networks for power delivery (from the main battery) and communication (e.g., LIN, CAN, FlexRay) between nodes. Wired networks cannot practically accommodate nodes in moving parts (e.g., tires) and with the increasing functional complexity in vehicles, they require kilometer-long harnesses, significantly increasing fuel consumption and manufacturin… ▽ More Vehicle electronic systems currently utilize wired networks for power delivery (from the main battery) and communication (e.g., LIN, CAN, FlexRay) between nodes. Wired networks cannot practically accommodate nodes in moving parts (e.g., tires) and with the increasing functional complexity in vehicles, they require kilometer-long harnesses, significantly increasing fuel consumption and manufacturing and design costs. As an alternative, energy harvesting intra-vehicular wireless sensor networks (IVWSN) can accommodate nodes in all locations and they obviate the need for wiring, significantly lowering costs. In this paper, we empirically analyze the feasibility of such an IVWSN framework via extensive in-vehicle measurements for communications at 2.4 GHz, ultra wideband (UWB) and millimeter wave (mmWave) frequencies together with radio frequency (RF), thermal and vibration energy harvesting. Our analyses show that mmWave performs best for short line-of-sight (LoS) links in the engine compartment with performance close to UWB for LoS links in the chassis and passenger compartments in terms of worst case signal-to-interference-and-noise-ratio. For non-LoS links, which appear especially more in the engine compartment and chassis, UWB provides the highest security and reliability. 2.4 GHz suffers heavily from interference in all compartments while UWB utilizes narrowband suppression techniques at the cost of lower bandwidth; mmWave inherently experiences very low interference due to its propagation characteristics. On the other hand, RF energy harvesting provides up to 1 mW of power in all compartments. Vibration and thermal energy harvesters can supply all nodes consuming <10 mW in the engine compartment and all <5 mW nodes in the chassis. In the passenger compartment, thermal harvesting is not available due to low temperature gradients but vibration and RF sources can supply <1 mW nodes. △ Less

Submitted 3 February, 2020; originally announced February 2020.

Comments: 7 pages, 5 figures, 1 table

Throughput Maximization for Full Duplex Wireless Powered Communication Networks

Authors: Muhammad Shahid Iqbal, Yalcin Sadi, Sinem Coleri

Abstract: In this paper, we consider a full duplex wireless powered communication network where multiple users with RF energy harvesting capabilities communicate to a hybrid energy and information access point. An optimization framework is proposed with the objective of maximizing the sum throughput of the users subject to energy causality and maximum transmit power constraints considering a realistic energ… ▽ More In this paper, we consider a full duplex wireless powered communication network where multiple users with RF energy harvesting capabilities communicate to a hybrid energy and information access point. An optimization framework is proposed with the objective of maximizing the sum throughput of the users subject to energy causality and maximum transmit power constraints considering a realistic energy harvesting model incorporating initial battery levels of the users. The joint optimization of power control, time allocation and scheduling is mathematically formulated as a mixed integer non linear programming problem which is hard to solve for a global optimum. The optimal power and time allocation and scheduling decisions are investigated separately based on the optimality analysis on the optimization variables. Optimal power and time allocation problem is proven to be convex for a given transmission order. Based on the derived optimality conditions, we propose a fast polynomial-time complexity heuristic algorithm. We illustrate that the proposed algorithm performs very close-to-optimal while significantly outperforming an equal time allocation based scheduling scheme. △ Less

Submitted 29 October, 2019; originally announced October 2019.