-
Downlink Clustering-Based Scheduling of IRS-Assisted Communications With Reconfiguration Constraints
Authors:
Alberto Rech,
Matteo Pagin,
Leonardo Badia,
Stefano Tomasin,
Marco Giordani,
Jonathan Gambini,
Michele Zorzi
Abstract:
Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an I…
▽ More
Intelligent reflecting surfaces (IRSs) are being widely investigated as a potential low-cost and energy-efficient alternative to active relays for improving coverage in next-generation cellular networks. However, technical constraints in the configuration of IRSs should be taken into account in the design of scheduling solutions and the assessment of their performance. To this end, we examine an IRS-assisted time division multiple access (TDMA) cellular network where the reconfiguration of the IRS incurs a communication cost; thus, we aim at limiting the number of reconfigurations over time. Along these lines, we propose a clustering-based heuristic scheduling scheme that maximizes the cell sum capacity, subject to a fixed number of reconfigurations within a TDMA frame. First, the best configuration of each user equipment (UE), in terms of joint beamforming and optimal IRS configuration, is determined using an iterative algorithm. Then, we propose different clustering techniques to divide the UEs into subsets sharing the same sub-optimal IRS configuration, derived through distance- and capacity-based algorithms. Finally, UEs within the same cluster are scheduled accordingly. We provide extensive numerical results for different propagation scenarios, IRS sizes, and phase shifters quantization constraints, showing the effectiveness of our approach in supporting multi-user IRS systems with practical constraints.
△ Less
Submitted 12 February, 2024; v1 submitted 23 May, 2023;
originally announced May 2023.
-
Downlink TDMA Scheduling for IRS-aided Communications with Block-Static Constraints
Authors:
Alberto Rech,
Matteo Pagin,
Stefano Tomasin,
Federico Moretto,
Leonardo Badia,
Marco Giordani,
Jonathan Gambini,
Michele Zorzi
Abstract:
Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequenc…
▽ More
Intelligent reflecting surfaces (IRSs) are being studied as possible low-cost energy-efficient alternatives to active relays, with the goal of solving the coverage issues of millimeter wave (mmWave) and terahertz (THz) network deployments. In the literature, these surfaces are often studied by idealizing their characteristics. Notably, it is often assumed that IRSs can tune with arbitrary frequency the phase-shifts induced by their elements, thanks to a wire-like control channel to the next generation node base (gNB). Instead, in this work we investigate an IRS-aided time division multiple access (TDMA) cellular network, where the reconfiguration of the IRS may entail an energy or communication cost, and we aim at limiting the number of reconfigurations over time. We develop a clustering-based heuristic scheduling, which optimizes the system sum-rate subject to a given number of reconfigurations within the TDMA frame. To such end, we first cluster user equipments (UEs) with a similar optimal IRS configuration. Then, we compute an overall IRS cluster configuration, which can be thus kept constant while scheduling the whole UEs cluster. Numerical results show that our approach is effective in supporting IRSs-aided systems with practical constraints, achieving up to 85% of the throughput obtained by an ideal deployment, while providing a 50% reduction in the number of IRS reconfigurations.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Statistical Properties of the Entropy from Ordinal Patterns
Authors:
Eduarda T. C. Chagas,
Alejandro. C. Frery,
Juliana Gambini,
Magdalena M. Lucini,
Heitor S. Ramos,
Andrea A. Rey
Abstract:
The ultimate purpose of the statistical analysis of ordinal patterns is to characterize the distribution of the features they induce. In particular, knowing the joint distribution of the pair Entropy-Statistical Complexity for a large class of time series models would allow statistical tests that are unavailable to date. Working in this direction, we characterize the asymptotic distribution of the…
▽ More
The ultimate purpose of the statistical analysis of ordinal patterns is to characterize the distribution of the features they induce. In particular, knowing the joint distribution of the pair Entropy-Statistical Complexity for a large class of time series models would allow statistical tests that are unavailable to date. Working in this direction, we characterize the asymptotic distribution of the empirical Shannon's Entropy for any model under which the true normalized Entropy is neither zero nor one. We obtain the asymptotic distribution from the Central Limit Theorem (assuming large time series), the Multivariate Delta Method, and a third-order correction of its mean value. We discuss the applicability of other results (exact, first-, and second-order corrections) regarding their accuracy and numerical stability. Within a general framework for building test statistics about Shannon's Entropy, we present a bilateral test that verifies if there is enough evidence to reject the hypothesis that two signals produce ordinal patterns with the same Shannon's Entropy. We applied this bilateral test to the daily maximum temperature time series from three cities (Dublin, Edinburgh, and Miami) and obtained sensible results.
△ Less
Submitted 15 September, 2022;
originally announced September 2022.
-
End-to-End Simulation of 5G Networks Assisted by IRS and AF Relays
Authors:
Matteo Pagin,
Marco Giordani,
Amir Ashtari Gargari,
Alberto Rech,
Federico Moretto,
Stefano Tomasin,
Jonathan Gambini,
Michele Zorzi
Abstract:
The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the…
▽ More
The high propagation and penetration loss experienced at millimeter wave (mmWave) frequencies requires ultra-dense deployments of 5th generation (5G) base stations, which may be infeasible and costly for network operators. Integrated Access and Backhaul (IAB) has been proposed to partially address this issue, even though raising concerns in terms of power consumption and scalability. Recently, the research community has been investigating Intelligent Reflective Surfaces (IRSs) and Amplify-and-Forward (AF) relays as more energy-efficient alternatives to solve coverage issues in 5G scenarios. Along these lines, this paper relies on a new simulation framework, based on ns-3, to simulate IRS/AF systems with a full-stack, end-to-end perspective, with considerations on to the impact of the channel model and the protocol stack of 5G NR networks. Our goal is to demonstrate whether these technologies can be used to relay 5G traffic requests and, if so, how to dimension IRS/AF nodes as a function of the number of end users.
△ Less
Submitted 4 March, 2022; v1 submitted 2 March, 2022;
originally announced March 2022.
-
Towards a Heterogeneous Smart Electromagnetic Environment for Millimeter-Wave Communications: An Industrial Viewpoint
Authors:
Roberto Flamini,
Danilo De Donno,
Jonathan Gambini,
Francesco Giuppi,
Christian Mazzucco,
Angelo Milani,
Laura Resteghini
Abstract:
Fifth generation (5G) and beyond communication systems open the door to millimeter Wave (mmWave) frequency bands to leverage the extremely large operating bandwidths and deliver unprecedented network capacity. These frequency bands are affected by high propagation losses that severely limit the achievable coverage. The simplest way to address this problem would be to increase the number of install…
▽ More
Fifth generation (5G) and beyond communication systems open the door to millimeter Wave (mmWave) frequency bands to leverage the extremely large operating bandwidths and deliver unprecedented network capacity. These frequency bands are affected by high propagation losses that severely limit the achievable coverage. The simplest way to address this problem would be to increase the number of installed mmWave base stations (BSs), at the same time augmenting the overall network cost, power consumption and ElectroMagnetic Field (EMF) levels. As alternative direction, here we propose to complement the macro-layer of mmWave BSs with a heterogeneous deployment of Smart Electromagnetic (Smart EM) Entities - namely IAB nodes, Smart Repeaters, Reconfigurable Intelligent Surfaces (RISs) and passive surfaces - that is judiciously planned to minimize the total installation costs while at the same time optimizing the network spectral efficiency. Initial network planning results underline the effectiveness of the proposed approach. The available technologies and the key research directions for achieving this view are thoroughly discussed by accounting for issues ranging from system-level design to the development of new materials.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Enabling Simulation-Based Optimization Through Machine Learning: A Case Study on Antenna Design
Authors:
Paolo Testolina,
Mattia Lecci,
Mattia Rebato,
Alberto Testolin,
Jonathan Gambini,
Roberto Flamini,
Christian Mazzucco,
Michele Zorzi
Abstract:
Complex phenomena are generally modeled with sophisticated simulators that, depending on their accuracy, can be very demanding in terms of computational resources and simulation time. Their time-consuming nature, together with a typically vast parameter space to be explored, make simulation-based optimization often infeasible. In this work, we present a method that enables the optimization of comp…
▽ More
Complex phenomena are generally modeled with sophisticated simulators that, depending on their accuracy, can be very demanding in terms of computational resources and simulation time. Their time-consuming nature, together with a typically vast parameter space to be explored, make simulation-based optimization often infeasible. In this work, we present a method that enables the optimization of complex systems through Machine Learning (ML) techniques. We show how well-known learning algorithms are able to reliably emulate a complex simulator with a modest dataset obtained from it. The trained emulator is then able to yield values close to the simulated ones in virtually no time. Therefore, it is possible to perform a global numerical optimization over the vast multi-dimensional parameter space, in a fraction of the time that would be required by a simple brute-force search. As a testbed for the proposed methodology, we used a network simulator for next-generation mmWave cellular systems. After simulating several antenna configurations and collecting the resulting network-level statistics, we feed it into our framework. Results show that, even with few data points, extrapolating a continuous model makes it possible to estimate the global optimum configuration almost instantaneously. The very same tool can then be used to achieve any further optimization goal on the same input parameters in negligible time.
△ Less
Submitted 28 January, 2021; v1 submitted 29 August, 2019;
originally announced August 2019.
-
Comparing Samples from the $\mathcal{G}^0$ Distribution using a Geodesic Distance
Authors:
Alejandro C. Frery,
Juliana Gambini
Abstract:
The $\mathcal{G}^0$ distribution is widely used for monopolarized SAR image modeling because it can characterize regions with different degree of texture accurately. It is indexed by three parameters: the number of looks (which can be estimated for the whole image), a scale parameter and a texture parameter. This paper presents a new proposal for comparing samples from the $\mathcal{G}^0$ distribu…
▽ More
The $\mathcal{G}^0$ distribution is widely used for monopolarized SAR image modeling because it can characterize regions with different degree of texture accurately. It is indexed by three parameters: the number of looks (which can be estimated for the whole image), a scale parameter and a texture parameter. This paper presents a new proposal for comparing samples from the $\mathcal{G}^0$ distribution using a Geodesic Distance (GD) as a measure of dissimilarity between models. The objective is quantifying the difference between pairs of samples from SAR data using both local parameters (scale and texture) of the $\mathcal{G}^0$ distribution. We propose three tests based on the GD which combine the tests presented in~\cite{GeodesicDistanceGI0JSTARS}, and we estimate their probability distributions using permutation methods.
△ Less
Submitted 23 April, 2019;
originally announced April 2019.
-
Parameter Estimation for the Single-Look $\mathcal{G}^0$ Distribution
Authors:
Débora Chan,
Andrea Rey,
Juliana Gambini,
Alejandro C. Frery
Abstract:
The statistical properties of Synthetic Aperture Radar (SAR) image texture reveals useful target characteristics. It is well-known that these images are affected by speckle, and prone to contamination as double bounce and corner reflectors. The $\mathcal{G}^0$ distribution is flexible enough to model different degrees of texture in speckled data. It is indexed by three parameters: $α$, related to…
▽ More
The statistical properties of Synthetic Aperture Radar (SAR) image texture reveals useful target characteristics. It is well-known that these images are affected by speckle, and prone to contamination as double bounce and corner reflectors. The $\mathcal{G}^0$ distribution is flexible enough to model different degrees of texture in speckled data. It is indexed by three parameters: $α$, related to the texture, $γ$, a scale parameter, and $L$, the number of looks which is related to the signal-to-noise ratio. Quality estimation of $α$ is essential due to its immediate interpretability. In this article, we compare the behavior of a number of parameter estimation techniques in the noisiest case, namely single look data. We evaluate them using Monte Carlo methods for non-contaminated and contaminated data, considering convergence rate, bias, mean squared error (MSE) and computational cost. The results are verified with simulated and actual SAR images.
△ Less
Submitted 29 September, 2018;
originally announced October 2018.
-
The Geodesic Distance between $\mathcal{G}_I^0$ Models and its Application to Region Discrimination
Authors:
José Naranjo-Torres,
Juliana Gambini,
Alejandro C. Frery
Abstract:
The $\mathcal{G}_I^0$ distribution is able to characterize different regions in monopolarized SAR imagery. It is indexed by three parameters: the number of looks (which can be estimated in the whole image), a scale parameter and a texture parameter. This paper presents a new proposal for feature extraction and region discrimination in SAR imagery, using the geodesic distance as a measure of dissim…
▽ More
The $\mathcal{G}_I^0$ distribution is able to characterize different regions in monopolarized SAR imagery. It is indexed by three parameters: the number of looks (which can be estimated in the whole image), a scale parameter and a texture parameter. This paper presents a new proposal for feature extraction and region discrimination in SAR imagery, using the geodesic distance as a measure of dissimilarity between $\mathcal{G}_I^0$ models. We derive geodesic distances between models that describe several practical situations, assuming the number of looks known, for same and different texture and for same and different scale. We then apply this new tool to the problems of (i)~identifying edges between regions with different texture, and (ii)~quantify the dissimilarity between pairs of samples in actual SAR data. We analyze the advantages of using the geodesic distance when compared to stochastic distances.
△ Less
Submitted 1 January, 2017;
originally announced January 2017.
-
Fast Cosine Transform to increase speed-up and efficiency of Karhunen-Loeve Transform for lossy image compression
Authors:
Mario Mastriani,
Juliana Gambini
Abstract:
In this work, we present a comparison between two techniques of image compression. In the first case, the image is divided in blocks which are collected according to zig-zag scan. In the second one, we apply the Fast Cosine Transform to the image, and then the transformed image is divided in blocks which are collected according to zig-zag scan too. Later, in both cases, the Karhunen-Loeve transfor…
▽ More
In this work, we present a comparison between two techniques of image compression. In the first case, the image is divided in blocks which are collected according to zig-zag scan. In the second one, we apply the Fast Cosine Transform to the image, and then the transformed image is divided in blocks which are collected according to zig-zag scan too. Later, in both cases, the Karhunen-Loeve transform is applied to mentioned blocks. On the other hand, we present three new metrics based on eigenvalues for a better comparative evaluation of the techniques. Simulations show that the combined version is the best, with minor Mean Absolute Error (MAE) and Mean Squared Error (MSE), higher Peak Signal to Noise Ratio (PSNR) and better image quality. Finally, new technique was far superior to JPEG and JPEG2000.
△ Less
Submitted 11 July, 2016;
originally announced July 2016.
-
Parameter Estimation in SAR Imagery using Stochastic Distances and Asymmetric Kernels
Authors:
Juliana Gambini,
Julia Cassetti,
María Magdalena Lucini,
Alejandro C. Frery
Abstract:
In this paper we analyze several strategies for the estimation of the roughness parameter of the $\mathcal G_I^0$ distribution. It has been shown that this distribution is able to characterize a large number of targets in monopolarized SAR imagery, deserving the denomination of "Universal Model" It is indexed by three parameters: the number of looks (which can be estimated in the whole image), a s…
▽ More
In this paper we analyze several strategies for the estimation of the roughness parameter of the $\mathcal G_I^0$ distribution. It has been shown that this distribution is able to characterize a large number of targets in monopolarized SAR imagery, deserving the denomination of "Universal Model" It is indexed by three parameters: the number of looks (which can be estimated in the whole image), a scale parameter, and the roughness or texture parameter. The latter is closely related to the number of elementary backscatters in each pixel, one of the reasons for receiving attention in the literature. Although there are efforts in providing improved and robust estimates for such quantity, its dependable estimation still poses numerical problems in practice. We discuss estimators based on the minimization of stochastic distances between empirical and theoretical densities, and argue in favor of using an estimator based on the Triangular distance and asymmetric kernels built with Inverse Gaussian densities. We also provide new results regarding the heavytailedness of this distribution.
△ Less
Submitted 4 August, 2014; v1 submitted 1 August, 2014;
originally announced August 2014.
-
Polarimetric SAR Image Segmentation with B-Splines and a New Statistical Model
Authors:
Alejandro C. Frery,
Julio Jacobo-Berlles,
Juliana Gambini,
Marta Mejail
Abstract:
We present an approach for polarimetric Synthetic Aperture Radar (SAR) image region boundary detection based on the use of B-Spline active contours and a new model for polarimetric SAR data: the GHP distribution. In order to detect the boundary of a region, initial B-Spline curves are specified, either automatically or manually, and the proposed algorithm uses a deformable contours technique to fi…
▽ More
We present an approach for polarimetric Synthetic Aperture Radar (SAR) image region boundary detection based on the use of B-Spline active contours and a new model for polarimetric SAR data: the GHP distribution. In order to detect the boundary of a region, initial B-Spline curves are specified, either automatically or manually, and the proposed algorithm uses a deformable contours technique to find the boundary. In doing this, the parameters of the polarimetric GHP model for the data are estimated, in order to find the transition points between the region being segmented and the surrounding area. This is a local algorithm since it works only on the region to be segmented. Results of its performance are presented.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
