-
Next-slot OFDM-CSI Prediction: Multi-head Self-attention or State Space Model?
Authors:
Mohamed Akrout,
Faouzi Bellili,
Amine Mezghani,
Robert W. Heath
Abstract:
The ongoing fifth-generation (5G) standardization is exploring the use of deep learning (DL) methods to enhance the new radio (NR) interface. Both in academia and industry, researchers are investigating the performance and complexity of multiple DL architecture candidates for specific one-sided and two-sided use cases such as channel state estimation (CSI) feedback, CSI prediction, beam management…
▽ More
The ongoing fifth-generation (5G) standardization is exploring the use of deep learning (DL) methods to enhance the new radio (NR) interface. Both in academia and industry, researchers are investigating the performance and complexity of multiple DL architecture candidates for specific one-sided and two-sided use cases such as channel state estimation (CSI) feedback, CSI prediction, beam management, and positioning. In this paper, we set focus on the CSI prediction task and study the performance and generalization of the two main DL layers that are being extensively benchmarked within the DL community, namely, multi-head self-attention (MSA) and state-space model (SSM). We train and evaluate MSA and SSM layers to predict the next slot for uplink and downlink communication scenarios over urban microcell (UMi) and urban macrocell (UMa) OFDM 5G channel models. Our numerical results demonstrate that SSMs exhibit better prediction and generalization capabilities than MSAs only for SISO cases. For MIMO scenarios, however, the MSA layer outperforms the SSM one. While both layers represent potential DL architectures for future DL-enabled 5G use cases, the overall investigation of this paper favors MSAs over SSMs.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Beam Training in mmWave Vehicular Systems: Machine Learning for Decoupling Beam Selection
Authors:
Ibrahim Kilinc,
Ryan M. Dreifuerst,
Junghoon Kim,
Robert W. Heath Jr
Abstract:
Codebook-based beam selection is one approach for configuring millimeter wave communication links. The overhead required to reconfigure the transmit and receive beam pair, though, increases in highly dynamic vehicular communication systems. Location information coupled with machine learning (ML) beam recommendation is one way to reduce the overhead of beam pair selection. In this paper, we develop…
▽ More
Codebook-based beam selection is one approach for configuring millimeter wave communication links. The overhead required to reconfigure the transmit and receive beam pair, though, increases in highly dynamic vehicular communication systems. Location information coupled with machine learning (ML) beam recommendation is one way to reduce the overhead of beam pair selection. In this paper, we develop ML-based location-aided approaches to decouple the beam selection between the user equipment (UE) and the base station (BS). We quantify the performance gaps due to decoupling beam selection and also disaggregating the UE's location information from the BS. Our simulation results show that decoupling beam selection with available location information at the BS performs comparable to joint beam pair selection at the BS. Moreover, decoupled beam selection without location closely approaches the performance of beam pair selection at the BS when sufficient beam pairs are swept.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Neural Codebook Design for Network Beam Management
Authors:
Ryan M. Dreifuerst,
Robert W. Heath Jr
Abstract:
Obtaining accurate and timely channel state information (CSI) is a fundamental challenge for large antenna systems. Mobile systems like 5G use a beam management framework that joins the initial access, beamforming, CSI acquisition, and data transmission. The design of codebooks for these stages, however, is challenging due to their interrelationships, varying array sizes, and site-specific channel…
▽ More
Obtaining accurate and timely channel state information (CSI) is a fundamental challenge for large antenna systems. Mobile systems like 5G use a beam management framework that joins the initial access, beamforming, CSI acquisition, and data transmission. The design of codebooks for these stages, however, is challenging due to their interrelationships, varying array sizes, and site-specific channel and user distributions. Furthermore, beam management is often focused on single-sector operations while ignoring the overarching network- and system-level optimization. In this paper, we proposed an end-to-end learned codebook design algorithm, network beamspace learning (NBL), that captures and optimizes codebooks to mitigate interference while maximizing the achievable performance with extremely large hybrid arrays. The proposed algorithm requires limited shared information yet designs codebooks that outperform traditional codebooks by over 10dB in beam alignment and achieve more than 25% improvements in network spectral efficiency.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
AdaBoost-Based Efficient Channel Estimation and Data Detection in One-Bit Massive MIMO
Authors:
Majdoddin Esfandiari,
Sergiy A. Vorobyov,
Robert W. Heath Jr
Abstract:
The use of one-bit analog-to-digital converter (ADC) has been considered as a viable alternative to high resolution counterparts in realizing and commercializing massive multiple-input multiple-output (MIMO) systems. However, the issue of discarding the amplitude information by one-bit quantizers has to be compensated. Thus, carefully tailored methods need to be developed for one-bit channel estim…
▽ More
The use of one-bit analog-to-digital converter (ADC) has been considered as a viable alternative to high resolution counterparts in realizing and commercializing massive multiple-input multiple-output (MIMO) systems. However, the issue of discarding the amplitude information by one-bit quantizers has to be compensated. Thus, carefully tailored methods need to be developed for one-bit channel estimation and data detection as the conventional ones cannot be used. To address these issues, the problems of one-bit channel estimation and data detection for MIMO orthogonal frequency division multiplexing (OFDM) system that operates over uncorrelated frequency selective channels are investigated here. We first develop channel estimators that exploit Gaussian discriminant analysis (GDA) classifier and approximated versions of it as the so-called weak classifiers in an adaptive boosting (AdaBoost) approach. Particularly, the combination of the approximated GDA classifiers with AdaBoost offers the benefit of scalability with the linear order of computations, which is critical in massive MIMO-OFDM systems. We then take advantage of the same idea for proposing the data detectors. Numerical results validate the efficiency of the proposed channel estimators and data detectors compared to other methods. They show comparable/better performance to that of the state-of-the-art methods, but require dramatically lower computational complexities and run times.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
Successive Bayesian Reconstructor for FAS Channel Estimation
Authors:
Zijian Zhang,
Jieao Zhu,
Linglong Dai,
Robert W. Heath Jr
Abstract:
Fluid antenna systems (FASs) can reconfigure their locations freely within a spatially continuous space. To keep favorable antenna positions, the channel state information (CSI) acquisition for FASs is essential. While some techniques have been proposed, most existing FAS channel estimators require several channel assumptions, such as slow variation and angular-domain sparsity. When these assumpti…
▽ More
Fluid antenna systems (FASs) can reconfigure their locations freely within a spatially continuous space. To keep favorable antenna positions, the channel state information (CSI) acquisition for FASs is essential. While some techniques have been proposed, most existing FAS channel estimators require several channel assumptions, such as slow variation and angular-domain sparsity. When these assumptions are not reasonable, the model mismatch may lead to unpredictable performance loss. In this paper, we propose the successive Bayesian reconstructor (S-BAR) as a general solution to estimate FAS channels. Unlike model-based estimators, the proposed S-BAR is prior-aided, which builds the experiential kernel for CSI acquisition. Inspired by Bayesian regression, the key idea of S-BAR is to model the FAS channels as a stochastic process, whose uncertainty can be successively eliminated by kernel-based sampling and regression. In this way, the predictive mean of the regressed stochastic process can be viewed as the maximum a posterior (MAP) estimator of FAS channels. Simulation results verify that, in both model-mismatched and model-matched cases, the proposed S-BAR can achieve higher estimation accuracy than the existing schemes.
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Channel Estimation and Hybrid Precoding for Frequency Selective Multiuser mmWave MIMO Systems
Authors:
J. P. González-Coma,
J. Rodríguez-Fernández,
N. González-Prelcic,
L. Castedo,
R. W. Heath
Abstract:
Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the cha…
▽ More
Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the channels from all the mobile stations (MSs) on each subcarrier. To reduce the number of measurements required, compressed sensing techniques are developed that exploit common support on the different subcarriers. In the second step, exploiting reciprocity and the channel estimates, the base station designs hybrid precoders and combiners. Two algorithms are developed for this purpose, with different performance and complexity tradeoffs: 1) a factorization of the purely digital solution, and 2) an iterative hybrid design. Extensive numerical experiments evaluate the proposed solutions comparing to state-of-the-art strategies, and illustrating design tradeoffs in overhead, complexity, and performance.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Towards 6G MIMO: Massive Spatial Multiplexing, Dense Arrays, and Interplay Between Electromagnetics and Processing
Authors:
Emil Björnson,
Chan-Byoung Chae,
Robert W. Heath Jr.,
Thomas L. Marzetta,
Amine Mezghani,
Luca Sanguinetti,
Fredrik Rusek,
Miguel R. Castellanos,
Dongsoo Jun,
Özlem Tugfe Demir
Abstract:
The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO…
▽ More
The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO (UM-MIMO)" is not only about adding more antennas but will also uncover new propagation and hardware phenomena that can only be treated by jointly utilizing insights from the communication, electromagnetic (EM), and circuit theory areas. This article offers a comprehensive overview of the key benefits of the UM-MIMO technology and the associated challenges. It explores massive multiplexing facilitated by radiative near-field effects, characterizes the spatial degrees-of-freedom, and practical channel estimation schemes tailored for massive arrays. Moreover, we provide a tutorial on EM theory and circuit theory, and how it is used to obtain physically consistent antenna and channel models. Subsequently, the article describes different ways to implement massive and dense antenna arrays, and how to co-design antennas with signal processing. The main open research challenges are identified at the end.
△ Less
Submitted 5 January, 2024;
originally announced January 2024.
-
Successive Bayesian Reconstructor for Channel Estimation in Fluid Antenna Systems
Authors:
Zijian Zhang,
Jieao Zhu,
Linglong Dai,
Robert W. Heath Jr
Abstract:
Fluid antenna systems (FASs) can reconfigure their antenna locations freely within a spatially continuous space. To keep favorable antenna positions, the channel state information (CSI) acquisition for FASs is essential. While some techniques have been proposed, most existing FAS channel estimators require several channel assumptions, such as slow variation and angular-domain sparsity. When these…
▽ More
Fluid antenna systems (FASs) can reconfigure their antenna locations freely within a spatially continuous space. To keep favorable antenna positions, the channel state information (CSI) acquisition for FASs is essential. While some techniques have been proposed, most existing FAS channel estimators require several channel assumptions, such as slow variation and angular-domain sparsity. When these assumptions are not reasonable, the model mismatch may lead to unpredictable performance loss. In this paper, we propose the successive Bayesian reconstructor (S-BAR) as a general solution to estimate FAS channels. Unlike model-based estimators, the proposed S-BAR is prior-aided, which builds the experiential kernel for CSI acquisition. Inspired by Bayesian regression, the key idea of S-BAR is to model the FAS channels as a stochastic process, whose uncertainty can be successively eliminated by kernel-based sampling and regression. In this way, the predictive mean of the regressed stochastic process can be viewed as the maximum a posterior (MAP) estimator of FAS channels. Simulation results verify that, in both model-mismatched and model-matched cases, the proposed S-BAR can achieve higher estimation accuracy than the existing schemes.
△ Less
Submitted 17 January, 2024; v1 submitted 11 December, 2023;
originally announced December 2023.
-
Hierarchical ML Codebook Design for Extreme MIMO Beam Management
Authors:
Ryan M. Dreifuerst,
Robert W. Heath Jr
Abstract:
Beam management is a strategy to unify beamforming and channel state information (CSI) acquisition with large antenna arrays in 5G. Codebooks serve multiple uses in beam management including beamforming reference signals, CSI reporting, and analog beam training. In this paper, we propose and evaluate a machine learning-refined codebook design process for extremely large multiple-input multiple-out…
▽ More
Beam management is a strategy to unify beamforming and channel state information (CSI) acquisition with large antenna arrays in 5G. Codebooks serve multiple uses in beam management including beamforming reference signals, CSI reporting, and analog beam training. In this paper, we propose and evaluate a machine learning-refined codebook design process for extremely large multiple-input multiple-output (X-MIMO) systems. We propose a neural network and beam selection strategy to design the initial access and refinement codebooks using end-to-end learning from beamspace representations. The algorithm, called Extreme-Beam Management (X-BM), can significantly improve the performance of extremely large arrays as envisioned for 6G and capture realistic wireless and physical layer aspects. Our results show an 8dB improvement in initial access and overall effective spectral efficiency improvements compared to traditional codebook methods.
△ Less
Submitted 24 November, 2023;
originally announced December 2023.
-
A generalization of the achievable rate of a MISO system using Bode-Fano wideband matching theory
Authors:
Nitish Deshpande,
Miguel R. Castellanos,
Saeed R. Khosravirad,
Jinfeng Du,
Harish Viswanathan,
Robert W. Heath Jr
Abstract:
Impedance-matching networks affect power transfer from the radio frequency (RF) chains to the antennas. Their design impacts the signal to noise ratio (SNR) and the achievable rate. In this paper, we maximize the information-theoretic achievable rate of a multiple-input-single-output (MISO) system with wideband matching constraints. Using a multiport circuit theory approach with frequency-selectiv…
▽ More
Impedance-matching networks affect power transfer from the radio frequency (RF) chains to the antennas. Their design impacts the signal to noise ratio (SNR) and the achievable rate. In this paper, we maximize the information-theoretic achievable rate of a multiple-input-single-output (MISO) system with wideband matching constraints. Using a multiport circuit theory approach with frequency-selective scattering parameters, we propose a general framework for optimizing the MISO achievable rate that incorporates Bode-Fano wideband matching theory. We express the solution to the achievable rate optimization problem in terms of the optimized transmission coefficient and the Lagrangian parameters corresponding to the Bode-Fano inequality constraints. We apply this framework to a single electric Chu's antenna and an array of two electric Chu's antennas. We compare the optimized achievable rate obtained numerically with other benchmarks like the ideal achievable rate computed by disregarding matching constraints and the achievable rate obtained by using sub-optimal matching strategies like conjugate matching and frequency-flat transmission. We also propose a practical methodology to approximate the achievable rate bound by using the optimal transmission coefficient to derive a physically realizable matching network through the ADS software.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Hybrid Arrays: How Many RF Chains Are Required to Prevent Beam Squint?
Authors:
Heedong Do,
Namyoon Lee,
Robert W. Heath Jr,
Angel Lozano
Abstract:
With increasing frequencies, bandwidths, and array apertures, the phenomenon of beam squint arises as a serious impairment to beamforming. Fully digital arrays with true time delay per antenna element are a potential solution, but they require downconversion at each element. This paper shows that hybrid arrays can perform essentially as well as digital arrays once the number of radio-frequency cha…
▽ More
With increasing frequencies, bandwidths, and array apertures, the phenomenon of beam squint arises as a serious impairment to beamforming. Fully digital arrays with true time delay per antenna element are a potential solution, but they require downconversion at each element. This paper shows that hybrid arrays can perform essentially as well as digital arrays once the number of radio-frequency chains exceeds a certain threshold that is far below the number of elements. The result is robust, holding also for suboptimum but highly appealing beamspace architectures.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
From Multilayer Perceptron to GPT: A Reflection on Deep Learning Research for Wireless Physical Layer
Authors:
Mohamed Akrout,
Amine Mezghani,
Ekram Hossain,
Faouzi Bellili,
Robert W. Heath
Abstract:
Most research studies on deep learning (DL) applied to the physical layer of wireless communication do not put forward the critical role of the accuracy-generalization trade-off in developing and evaluating practical algorithms. To highlight the disadvantage of this common practice, we revisit a data decoding example from one of the first papers introducing DL-based end-to-end wireless communicati…
▽ More
Most research studies on deep learning (DL) applied to the physical layer of wireless communication do not put forward the critical role of the accuracy-generalization trade-off in developing and evaluating practical algorithms. To highlight the disadvantage of this common practice, we revisit a data decoding example from one of the first papers introducing DL-based end-to-end wireless communication systems to the research community and promoting the use of artificial intelligence (AI)/DL for the wireless physical layer. We then put forward two key trade-offs in designing DL models for communication, namely, accuracy versus generalization and compression versus latency. We discuss their relevance in the context of wireless communications use cases using emerging DL models including large language models (LLMs). Finally, we summarize our proposed evaluation guidelines to enhance the research impact of DL on wireless communications. These guidelines are an attempt to reconcile the empirical nature of DL research with the rigorous requirement metrics of wireless communications systems.
△ Less
Submitted 14 July, 2023;
originally announced July 2023.
-
Online variable-length source coding for minimum bitrate LQG control
Authors:
Travis C. Cuvelier,
Takashi Tanaka,
Robert W. Heath Jr
Abstract:
We propose an adaptive coding approach to achieve linear-quadratic-Gaussian (LQG) control with near-minimum bitrate prefix-free feedback. Our approach combines a recent analysis of a quantizer design for minimum rate LQG control with work on universal lossless source coding for sources on countable alphabets. In the aforementioned quantizer design, it was established that the quantizer outputs are…
▽ More
We propose an adaptive coding approach to achieve linear-quadratic-Gaussian (LQG) control with near-minimum bitrate prefix-free feedback. Our approach combines a recent analysis of a quantizer design for minimum rate LQG control with work on universal lossless source coding for sources on countable alphabets. In the aforementioned quantizer design, it was established that the quantizer outputs are an asymptotically stationary, ergodic process. To enable LQG control with provably near-minimum bitrate, the quantizer outputs must be encoded into binary codewords efficiently. This is possible given knowledge of the probability distributions of the quantizer outputs, or of their limiting distribution. Obtaining such knowledge is challenging; the distributions do not readily admit closed form descriptions. This motivates the application of universal source coding. Our main theoretical contribution in this work is a proof that (after an invertible transformation), the quantizer outputs are random variables that fall within an exponential or power-law envelope class (depending on the plant dimension). Using ideas from universal coding on envelope classes, we develop a practical, zero-delay version of these algorithms that operates with fixed precision arithmetic. We evaluate the performance of this algorithm numerically, and demonstrate competitive results with respect to fundamental tradeoffs between bitrate and LQG control performance.
△ Less
Submitted 2 April, 2023;
originally announced April 2023.
-
ML Codebook Design for Initial Access and CSI Type-II Feedback in Sub-6GHz 5G NR
Authors:
Ryan M. Dreifuerst,
Robert W. Heath Jr
Abstract:
Beam codebooks are a recent feature to enable high dimension multiple-input multiple-output in 5G. Codebooks comprised of customizable beamforming weights can be used to transmit reference signals and aid the channel state information (CSI) acquisition process. Codebooks are also used for quantizing feedback following CSI acquisition. In this paper, we characterize the role of each codebook used d…
▽ More
Beam codebooks are a recent feature to enable high dimension multiple-input multiple-output in 5G. Codebooks comprised of customizable beamforming weights can be used to transmit reference signals and aid the channel state information (CSI) acquisition process. Codebooks are also used for quantizing feedback following CSI acquisition. In this paper, we characterize the role of each codebook used during the beam management process and design a neural network to find codebooks that improve overall system performance. Evaluating a codebook requires considering the system-level dependency between the codebooks, feedback, overhead, and spectral efficiency. The proposed neural network is built on translating codebook and feedback knowledge into a consistent beamspace basis similar to a virtual channel model to generate initial access codebooks. This beamspace codebook algorithm is designed to directly integrate with current 5G beam management standards without changing the feedback format or requiring additional side information. Our simulations show that the neural network codebooks improve over traditional codebooks, even in dispersive sub-6GHz environments. We further use our framework to evaluate CSI feedback formats with regard to multi-user spectral efficiency. Our results suggest that optimizing codebook performance can provide valuable performance improvements, but optimizing the feedback configuration is also important in sub-6GHz bands.
△ Less
Submitted 16 May, 2023; v1 submitted 5 March, 2023;
originally announced March 2023.
-
Twenty-Five Years of Advances in Beamforming: From Convex and Nonconvex Optimization to Learning Techniques
Authors:
Ahmet M. Elbir,
Kumar Vijay Mishra,
Sergiy A. Vorobyov,
Robert W. Heath Jr
Abstract:
Beamforming is a signal processing technique to steer, shape, and focus an electromagnetic wave using an array of sensors toward a desired direction. It has been used in several engineering applications such as radar, sonar, acoustics, astronomy, seismology, medical imaging, and communications. With the advances in multi-antenna technologies largely for radar and communications, there has been a g…
▽ More
Beamforming is a signal processing technique to steer, shape, and focus an electromagnetic wave using an array of sensors toward a desired direction. It has been used in several engineering applications such as radar, sonar, acoustics, astronomy, seismology, medical imaging, and communications. With the advances in multi-antenna technologies largely for radar and communications, there has been a great interest on beamformer design mostly relying on convex/nonconvex optimization. Recently, machine learning is being leveraged for obtaining attractive solutions to more complex beamforming problems. This article captures the evolution of beamforming in the last twenty-five years from convex-to-nonconvex optimization and optimization-to-learning approaches. It provides a glimpse of this important signal processing technique into a variety of transmit-receive architectures, propagation zones, paths, and conventional/emerging applications.
△ Less
Submitted 22 March, 2023; v1 submitted 3 November, 2022;
originally announced November 2022.
-
Coverage and Rate of Joint Communication and Parameter Estimation in Wireless Networks
Authors:
Nicholas R. Olson,
Jeffrey G. Andrews,
Robert W. Heath Jr
Abstract:
From an information theoretic perspective, joint communication and sensing (JCAS) represents a natural generalization of communication network functionality. However, it requires the re-evaluation of network performance from a multi-objective perspective. We develop a novel mathematical framework for characterizing the sensing and communication coverage probability and ergodic rate in JCAS network…
▽ More
From an information theoretic perspective, joint communication and sensing (JCAS) represents a natural generalization of communication network functionality. However, it requires the re-evaluation of network performance from a multi-objective perspective. We develop a novel mathematical framework for characterizing the sensing and communication coverage probability and ergodic rate in JCAS networks. We employ a formulation of sensing parameter estimation based on mutual information to extend the notions of coverage probability and ergodic rate to the radar setting. We define sensing coverage probability as the probability that the rate of information extracted about the parameters of interest associated with a typical radar target exceeds some threshold, and sensing ergodic rate as the spatial average of the aforementioned rate of information. Using this framework, we analyze the downlink sensing and communication coverage and rate of a mmWave JCAS network employing a shared waveform, directional beamforming, and monostatic sensing. Leveraging tools from stochastic geometry, we derive upper and lower bounds for these quantities. We also develop several general technical results including: i) a generic method for obtaining closed form upper and lower bounds on the Laplace Transform of a shot noise process, ii) a new analog of H{ö}lder's Inequality to the setting of harmonic means, and iii) a relation between the Laplace and Mellin Transforms of a non-negative random variable. We use the derived bounds to numerically investigate the performance of JCAS networks under varying base station and blockage density. Among several insights, our numerical analysis indicates that network densification improves sensing SINR performance -- in contrast to communications.
△ Less
Submitted 15 January, 2024; v1 submitted 5 October, 2022;
originally announced October 2022.
-
Radar Imaging Based on IEEE 802.11ad Waveform in V2I Communications
Authors:
Geonho Han,
Junil Choi,
Robert W. Heath Jr
Abstract:
Since most of vehicular radar systems are already exploiting millimeter-wave (mmWave) spectra, it would become much more feasible to implement a joint radar and communication system by extending communication frequencies into the mmWave band. In this paper, an IEEE 802.11ad waveform-based radar imaging technique is proposed for vehicular settings. A roadside unit (RSU) transmits the IEEE 802.11ad…
▽ More
Since most of vehicular radar systems are already exploiting millimeter-wave (mmWave) spectra, it would become much more feasible to implement a joint radar and communication system by extending communication frequencies into the mmWave band. In this paper, an IEEE 802.11ad waveform-based radar imaging technique is proposed for vehicular settings. A roadside unit (RSU) transmits the IEEE 802.11ad waveform to a vehicle for communications while the RSU also listens to the echoes of transmitted waveform to perform inverse synthetic aperture radar (ISAR) imaging. To obtain high-resolution images of the vehicle, the RSU needs to accurately estimate round-trip delays, Doppler shifts, and velocity of vehicle. The proposed ISAR imaging first estimates the round-trip delays using a good correlation property of Golay complementary sequences in the IEEE 802.11ad preamble. The Doppler shifts are then obtained using least square estimation from the echo signals and refined to compensate phase wrapping caused by phase rotation. The velocity of vehicle is determined using an equation of motion and the estimated Doppler shifts. Simulation results verify that the proposed technique is able to form high-resolution ISAR images from point scatterer models of realistic vehicular settings with different viewpoints. The proposed ISAR imaging technique can be used for various vehicular applications, e.g., traffic condition analyses or advanced collision warning systems.
△ Less
Submitted 4 August, 2022;
originally announced August 2022.
-
Super-Wideband Massive MIMO
Authors:
Mohamed Akrout,
Volodymyr Shyianov,
Faouzi Bellili,
Amine Mezghani,
Robert W. Heath
Abstract:
We present a unified model for connected antenna arrays with a large number of tightly integrated (i.e., coupled) antennas in a compact space within the context of massive multiple-input multiple-output (MIMO) communication. We refer to this system as tightly-coupled massive MIMO. From an information-theoretic perspective, scaling the design of tightly-coupled massive MIMO systems in terms of the…
▽ More
We present a unified model for connected antenna arrays with a large number of tightly integrated (i.e., coupled) antennas in a compact space within the context of massive multiple-input multiple-output (MIMO) communication. We refer to this system as tightly-coupled massive MIMO. From an information-theoretic perspective, scaling the design of tightly-coupled massive MIMO systems in terms of the number of antennas, the operational bandwidth, and form factor was not addressed in prior art. We investigate this open research problem using a physically consistent modeling approach for far-field (FF) MIMO communication based on multi-port circuit theory. In doing so, we turn mutual coupling (MC) from a foe to a friend of MIMO systems design, thereby challenging a basic percept in antenna systems engineering that promotes MC mitigation/compensation. We show that tight MC widens the operational bandwidth of antenna arrays thereby unleashing a missing MIMO gain that we coin "bandwidth gain". Furthermore, we derive analytically the asymptotically optimum spacing-to-antenna-size ratio by establishing a condition for tight coupling in the limit of large-size antenna arrays with quasi-continuous apertures. We also optimize the antenna array size while maximizing the achievable rate under fixed transmit power and inter-element spacing. Then, we study the impact of MC on the achievable rate of MIMO systems under line-of-sight (LoS) and Rayleigh fading channels. These results reveal new insights into the design of tightly-coupled massive antenna arrays as opposed to the widely-adopted "disconnected" designs that disregard MC by putting faith in the half-wavelength spacing rule.
△ Less
Submitted 6 May, 2023; v1 submitted 2 August, 2022;
originally announced August 2022.
-
Time-invariant prefix-free source coding for MIMO LQG control
Authors:
Travis C. Cuvelier,
Takashi Tanaka,
Robert W. Heath Jr
Abstract:
In this work we consider discrete-time multiple-input multiple-output (MIMO) linear-quadratic-Gaussian (LQG) control where the feedback consists of variable length binary codewords. To simplify the decoder architecture, we enforce a strict prefix constraint on the codewords. We develop a data compression architecture that provably achieves a near minimum time-average expected bitrate for a fixed c…
▽ More
In this work we consider discrete-time multiple-input multiple-output (MIMO) linear-quadratic-Gaussian (LQG) control where the feedback consists of variable length binary codewords. To simplify the decoder architecture, we enforce a strict prefix constraint on the codewords. We develop a data compression architecture that provably achieves a near minimum time-average expected bitrate for a fixed constraint on the LQG performance. The architecture conforms to the strict prefix constraint and does not require time-varying lossless source coding, in contrast to the prior art.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Reinforcement Learning-based Joint User Scheduling and Link Configuration in Millimeter-wave Networks
Authors:
Yi Zhang,
Robert W. Heath Jr
Abstract:
In this paper, we develop algorithms for joint user scheduling and three types of mmWave link configuration: relay selection, codebook optimization, and beam tracking in millimeter wave (mmWave) networks. Our goal is to design an online controller that dynamically schedules users and configures their links to minimize the system delay. To solve this complex scheduling problem, we model it as a dyn…
▽ More
In this paper, we develop algorithms for joint user scheduling and three types of mmWave link configuration: relay selection, codebook optimization, and beam tracking in millimeter wave (mmWave) networks. Our goal is to design an online controller that dynamically schedules users and configures their links to minimize the system delay. To solve this complex scheduling problem, we model it as a dynamic decision-making process and develop two reinforcement learning-based solutions. The first solution is based on deep reinforcement learning (DRL), which leverages the proximal policy optimization to train a neural network-based solution. Due to the potential high sample complexity of DRL, we also propose an empirical multi-armed bandit (MAB)-based solution, which decomposes the decision-making process into a sequential of sub-actions and exploits classic maxweight scheduling and Thompson sampling to decide those sub-actions. Our evaluation of the proposed solutions confirms their effectiveness in providing acceptable system delay. It also shows that the DRL-based solution has better delay performance while the MAB-based solution has a faster training process.
△ Less
Submitted 24 October, 2022; v1 submitted 7 July, 2022;
originally announced July 2022.
-
A wideband generalization of the near-field region for extremely large phased-arrays
Authors:
Nitish Deshpande,
Miguel R. Castellanos,
Saeed R. Khosravirad,
Jinfeng Du,
Harish Viswanathan,
Robert W. Heath Jr
Abstract:
The narrowband and far-field assumption in conventional wireless system design leads to a mismatch with the optimal beamforming required for wideband and near-field systems. This discrepancy is exacerbated for larger apertures and bandwidths. To characterize the behavior of near-field and wideband systems, we derive the beamforming gain expression achieved by a frequency-flat phased array designed…
▽ More
The narrowband and far-field assumption in conventional wireless system design leads to a mismatch with the optimal beamforming required for wideband and near-field systems. This discrepancy is exacerbated for larger apertures and bandwidths. To characterize the behavior of near-field and wideband systems, we derive the beamforming gain expression achieved by a frequency-flat phased array designed for plane-wave propagation. To determine the far-field to near-field boundary for a wideband system, we propose a frequency-selective distance metric. The proposed far-field threshold increases for frequencies away from the center frequency. The analysis results in a fundamental upper bound on the product of the array aperture and the system bandwidth. We present numerical results to illustrate how the gain threshold affects the maximum usable bandwidth for the n260 and n261 5G NR bands.
△ Less
Submitted 29 June, 2022; v1 submitted 28 June, 2022;
originally announced June 2022.
-
Massive MIMO Beam Management in Sub-6 GHz 5G NR
Authors:
Ryan M. Dreifuerst,
Robert W. Heath jr.,
Ali Yazdan
Abstract:
Beam codebooks are a new feature of massive multiple-input multiple-output (M-MIMO) in 5G new radio (NR). Codebooks comprised of beamforming vectors are used to transmit reference signals and obtain limited channel state information (CSI) from receivers via the codeword index. This enables large arrays that cannot otherwise obtain sufficient CSI. The performance, however, is limited by the codeboo…
▽ More
Beam codebooks are a new feature of massive multiple-input multiple-output (M-MIMO) in 5G new radio (NR). Codebooks comprised of beamforming vectors are used to transmit reference signals and obtain limited channel state information (CSI) from receivers via the codeword index. This enables large arrays that cannot otherwise obtain sufficient CSI. The performance, however, is limited by the codebook design. In this paper, we show that machine learning can be used to train site-specific codebooks for initial access. We design a neural network based on an autoencoder architecture that uses a beamspace observation in combination with RF environment characteristics to improve the synchronization signal (SS) burst codebook. We test our algorithm using a flexible dataset of channels generated from QuaDRiGa. The results show that our model outperforms the industry standard (DFT beams) and approaches the optimal performance (perfect CSI and singular value decomposition (SVD)-based beamforming), using only a few bits of feedback.
△ Less
Submitted 12 April, 2022;
originally announced April 2022.
-
Time-invariant Prefix Coding for LQG Control
Authors:
Travis C. Cuvelier,
Takashi Tanaka,
Robert W. Heath Jr
Abstract:
Motivated by control with communication constraints, in this work we develop a time-invariant data compression architecture for linear-quadratic-Gaussian (LQG) control with minimum bitrate prefix-free feedback. For any fixed control performance, the approach we propose nearly achieves known directed information (DI) lower bounds on the time-average expected codeword length. We refine the analysis…
▽ More
Motivated by control with communication constraints, in this work we develop a time-invariant data compression architecture for linear-quadratic-Gaussian (LQG) control with minimum bitrate prefix-free feedback. For any fixed control performance, the approach we propose nearly achieves known directed information (DI) lower bounds on the time-average expected codeword length. We refine the analysis of a classical achievability approach, which required quantized plant measurements to be encoded via a time-varying lossless source code. We prove that the sequence of random variables describing the quantizations has a limiting distribution and that the quantizations may be encoded with a fixed source code optimized for this distribution without added time-asymptotic redundancy. Our result follows from analyzing the long-term stochastic behavior of the system, and permits us to additionally guarantee that the time-average codeword length (as opposed to expected length) is almost surely within a few bits of the minimum DI. To our knowledge, this time-invariant achievability result is the first in the literature.
The originally published version of the supplementary material included a proof that contained an error that turned out to be inconsequential. This updated preprint corrects this error, which originally appeared under Lemma A.7.
△ Less
Submitted 6 July, 2023; v1 submitted 1 April, 2022;
originally announced April 2022.
-
A Lower-bound for Variable-length Source Coding in Linear-Quadratic-Gaussian Control with Shared Randomness
Authors:
Travis C. Cuvelier,
Takashi Tanaka,
Robert W. Heath Jr
Abstract:
In this letter, we consider a Linear Quadratic Gaussian (LQG) control system where feedback occurs over a noiseless binary channel and derive lower bounds on the minimum communication cost (quantified via the channel bitrate) required to attain a given control performance. We assume that at every time step an encoder can convey a packet containing a variable number of bits over the channel to a de…
▽ More
In this letter, we consider a Linear Quadratic Gaussian (LQG) control system where feedback occurs over a noiseless binary channel and derive lower bounds on the minimum communication cost (quantified via the channel bitrate) required to attain a given control performance. We assume that at every time step an encoder can convey a packet containing a variable number of bits over the channel to a decoder at the controller. Our system model provides for the possibility that the encoder and decoder have shared randomness, as is the case in systems using dithered quantizers. We define two extremal prefix-free requirements that may be imposed on the message packets; such constraints are useful in that they allow the decoder, and potentially other agents to uniquely identify the end of a transmission in an online fashion. We then derive a lower bound on the rate of prefix-free coding in terms of directed information; in particular we show that a previously known bound still holds in the case with shared randomness. We generalize the bound for when prefix constraints are relaxed, and conclude with a rate-distortion formulation.
△ Less
Submitted 2 June, 2022; v1 submitted 23 March, 2022;
originally announced March 2022.
-
Dynamic Network-Assisted D2D-Aided Coded Distributed Learning
Authors:
Nikita Zeulin,
Olga Galinina,
Nageen Himayat,
Sergey Andreev,
Robert W. Heath Jr
Abstract:
Today, various machine learning (ML) applications offer continuous data processing and real-time data analytics at the edge of a wireless network. Distributed real-time ML solutions are highly sensitive to the so-called straggler effect caused by resource heterogeneity and alleviated by various computation offloading mechanisms that seriously challenge the communication efficiency, especially in l…
▽ More
Today, various machine learning (ML) applications offer continuous data processing and real-time data analytics at the edge of a wireless network. Distributed real-time ML solutions are highly sensitive to the so-called straggler effect caused by resource heterogeneity and alleviated by various computation offloading mechanisms that seriously challenge the communication efficiency, especially in large-scale scenarios. To decrease the communication overhead, we rely on device-to-device (D2D) connectivity that improves spectrum utilization and allows efficient data exchange between devices in proximity. In particular, we design a novel D2D-aided coded federated learning method (D2D-CFL) for efficient load balancing across devices. The proposed solution captures system dynamics, including data (time-dependent learning model, varied intensity of data arrivals), device (diverse computational resources and volume of training data), and deployment (varied locations and D2D graph connectivity). To minimize the number of communication rounds, we derive an optimal compression rate for achieving minimum processing time and establish its connection with the convergence time. The resulting optimization problem provides suboptimal compression parameters, which improve the total training time. Our proposed method is beneficial for real-time collaborative applications, where the users continuously generate training data resulting in the model drift.
△ Less
Submitted 3 April, 2022; v1 submitted 26 November, 2021;
originally announced November 2021.
-
Achievable Rate of Near-Field Communications Based on Physically Consistent Models
Authors:
Mohamed Akrout,
Volodymyr Shyianov,
Faouzi Bellili,
Amine Mezghani,
Robert W. Heath
Abstract:
This paper introduces a novel information-theoretic approach for studying the effects of mutual coupling (MC), between the transmit and receive antennas, on the overall performance of single-input-single-output (SISO) near-field communications. By incorporating the finite antenna size constraint using Chu's theory and under the assumption of canonical-minimum scattering, we derive the MC between t…
▽ More
This paper introduces a novel information-theoretic approach for studying the effects of mutual coupling (MC), between the transmit and receive antennas, on the overall performance of single-input-single-output (SISO) near-field communications. By incorporating the finite antenna size constraint using Chu's theory and under the assumption of canonical-minimum scattering, we derive the MC between two radiating volumes of fixed sizes. Expressions for the self and mutual impedances are obtained by the use of the reciprocity theorem. Based on a circuit-theoretic two-port model for SISO radio communication systems, we establish the achievable rate for a given pair of transmit and receive antenna sizes, thereby providing an upper bound on the system performance under physical size constraints. Through the lens of these findings, we shed new light on the influence of MC on the information-theoretic limits of near-field communications using compact antennas.
△ Less
Submitted 9 December, 2021; v1 submitted 17 November, 2021;
originally announced November 2021.
-
Optimization of a Millimeter-Wave UAV-to-Ground Network in Urban Deployments
Authors:
Enass Hriba,
Matthew C. Valenti,
Robert W. Heath Jr
Abstract:
An urban tactical wireless network is considered wherein the base stations are situated on unmanned aerial vehicles (UAVs) that provide connectivity to ground assets such as vehicles located on city streets. The UAVs are assumed to be randomly deployed at a fixed height according to a two-dimensional point process. Millimeter-wave (mmWave) frequencies are used to avail of large available bandwidth…
▽ More
An urban tactical wireless network is considered wherein the base stations are situated on unmanned aerial vehicles (UAVs) that provide connectivity to ground assets such as vehicles located on city streets. The UAVs are assumed to be randomly deployed at a fixed height according to a two-dimensional point process. Millimeter-wave (mmWave) frequencies are used to avail of large available bandwidths and spatial isolation due to beamforming. In urban environments, mmWave signals are prone to blocking of the line-of-sight (LoS) by buildings. While reflections are possible, the desire for consistent connectivity places a strong preference on the existence of an unblocked LoS path. As such, the key performance metric considered in this paper is the connectivity probability, which is the probability of an unblocked LoS path to at least one UAV within some maximum transmission distance. By leveraging tools from stochastic geometry, the connectivity probability is characterized as a function of the city type (e.g., urban, dense urban, suburban), density of UAVs (average number of UAVs per square km), and height of the UAVs. The city streets are modeled as a Manhattan Poisson Line Process (MPLP) and the building heights are randomly distributed. The analysis first finds the connectivity probability conditioned on a particular network realization (location of the UAVs) and then removes the conditioning to uncover the distribution of the connectivity; i.e., the fraction of network realizations that will fail to meet an outage threshold. While related work has applied an MPLP to networks with a single UAV, the contributions of this paper are that it (1) considers networks of multiple UAVs, (2) characterizes the performance by a connectivity distribution, and (3) identifies the optimal altitude for the UAVs.
△ Less
Submitted 31 October, 2021;
originally announced November 2021.
-
SignalNet: A Low Resolution Sinusoid Decomposition and Estimation Network
Authors:
Ryan Dreifuerst,
Robert W. Heath Jr
Abstract:
The detection and estimation of sinusoids is a fundamental signal processing task for many applications related to sensing and communications. While algorithms have been proposed for this setting, quantization is a critical, but often ignored modeling effect. In wireless communications, estimation with low resolution data converters is relevant for reduced power consumption in wideband receivers.…
▽ More
The detection and estimation of sinusoids is a fundamental signal processing task for many applications related to sensing and communications. While algorithms have been proposed for this setting, quantization is a critical, but often ignored modeling effect. In wireless communications, estimation with low resolution data converters is relevant for reduced power consumption in wideband receivers. Similarly, low resolution sampling in imaging and spectrum sensing allows for efficient data collection. In this work, we propose SignalNet, a neural network architecture that detects the number of sinusoids and estimates their parameters from quantized in-phase and quadrature samples. We incorporate signal reconstruction internally as domain knowledge within the network to enhance learning and surpass traditional algorithms in mean squared error and Chamfer error. We introduce a worst-case learning threshold for comparing the results of our network relative to the underlying data distributions. This threshold provides insight into why neural networks tend to outperform traditional methods and into the learned relationships between the input and output distributions. In simulation, we find that our algorithm is always able to surpass the threshold for three-bit data but often cannot exceed the threshold for one-bit data. We use the learning threshold to explain, in the one-bit case, how our estimators learn to minimize the distributional loss, rather than learn features from the data.
△ Less
Submitted 13 January, 2022; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Deep Learning-based Compressive Beam Alignment in mmWave Vehicular Systems
Authors:
Yuyang Wang,
Nitin Jonathan Myers,
Nuria González-Prelcic,
Robert W. Heath Jr
Abstract:
Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this…
▽ More
Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this paper, we propose a deep learning-based technique to design a structured compressed sensing (CS) matrix that is well suited to the underlying channel distribution for mmWave vehicular beam alignment. The proposed approach leverages both sparsity and the particular spatial structure that appears in vehicular channels. We model the compressive channel acquisition by a two-dimensional (2D) convolutional layer followed by dropout. We design fully-connected layers to optimize channel acquisition and beam alignment. We incorporate the low-resolution phase shifter constraint during neural network training by using projected gradient descent for weight updates. Furthermore, we exploit channel spectral structure to optimize the power allocated for different subcarriers. Simulations indicate that our deep learning-based approach achieves better beam alignment than standard CS techniques which use random phase shift-based design. Numerical experiments also show that one single subcarrier is sufficient to provide necessary information for beam alignment.
△ Less
Submitted 26 February, 2021;
originally announced March 2021.
-
Massive MIMO with Dense Arrays and 1-bit Data Converters
Authors:
Amine Mezghani,
Faouzi Bellili,
Robert W. Heath, Jr
Abstract:
We consider wireless communication systems with compact planar arrays having densely spaced antenna elements in conjunction with one-bit analog-to-digital and digital-to-analog converters (ADCs/DACs). We provide closed-form expressions for the achievable rates with simple linear processing techniques for the uplink as well as the downlink scenarios while taking into account the effects of antenna…
▽ More
We consider wireless communication systems with compact planar arrays having densely spaced antenna elements in conjunction with one-bit analog-to-digital and digital-to-analog converters (ADCs/DACs). We provide closed-form expressions for the achievable rates with simple linear processing techniques for the uplink as well as the downlink scenarios while taking into account the effects of antenna mutual coupling. In the downlink case, we introduce the concept of non-radiating dithering to combat correlations of the quantization errors. Under higher antenna element density, we show that the performance of the quantized system can be made close to the ideal performance regardless of the operating signal-to-noise ratio.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Massive MIMO Precoding and Spectral Shaping with Low Resolution Phase-only DACs and Active Constellation Extension
Authors:
Amine Mezghani,
Robert W. Heath Jr
Abstract:
Nonlinear precoding and pulse shaping are jointly considered in multi-user massive multiple-input multiple-output (MIMO) systems with low-resolution D/A-converters (DACs) in terms of algorithmic approach as well as large system performance. Two design criteria are investigated: the mean {squared} error (MSE) with active constellation extension (ACE) and the symbol error rate (SER). Both formulatio…
▽ More
Nonlinear precoding and pulse shaping are jointly considered in multi-user massive multiple-input multiple-output (MIMO) systems with low-resolution D/A-converters (DACs) in terms of algorithmic approach as well as large system performance. Two design criteria are investigated: the mean {squared} error (MSE) with active constellation extension (ACE) and the symbol error rate (SER). Both formulations are solved based on a modified version of the generalized approximate message passing (GAMP) algorithm. Furthermore, theoretical performance results are derived based on the state evolution analysis of the GAMP algorithm. The MSE based technique is extended to jointly perform over-the-air (OTA) spectral shaping and precoding for frequency-selective channels, in which the spectral performance is characterized at the transmitter and at the receiver. Simulation and analytical results demonstrate that the MSE based approach yields the same performance as the SER based formulation in terms of uncoded SER. The analytical results provide good performance predictions up to medium SNR. Substantial improvements in detection, as well as spectral performance, are obtained from the proposed combined pulse shaping and precoding approach compared to standard linear methods.
△ Less
Submitted 27 June, 2021; v1 submitted 30 November, 2020;
originally announced December 2020.
-
Achievable Rate with Antenna Size Constraint: Shannon meets Chu and Bode
Authors:
Volodymyr Shyianov,
Mohamed Akrout,
Faouzi Bellili,
Amine Mezghani,
Robert W. Heath
Abstract:
Using ideas from Chu and Bode/Fano theories, we characterize the maximum achievable rate over the single-input single-output wireless communication channels under a restriction on the antenna size at the receiver. By employing circuit-theoretic multiport models for radio communication systems, we derive the information-theoretic limits of compact antennas. We first describe an equivalent Chu's ant…
▽ More
Using ideas from Chu and Bode/Fano theories, we characterize the maximum achievable rate over the single-input single-output wireless communication channels under a restriction on the antenna size at the receiver. By employing circuit-theoretic multiport models for radio communication systems, we derive the information-theoretic limits of compact antennas. We first describe an equivalent Chu's antenna circuit under the physical realizability conditions of its reflection coefficient. Such a design allows us to subsequently compute the achievable rate for a given receive antenna size thereby providing a physical bound on the system performance that we compare to the standard size-unconstrained Shannon capacity. We also determine the effective signal-to-noise ratio (SNR) which strongly depends on the antenna size and experiences an apparent finite-size performance degradation where only a fraction of Shannon capacity can be achieved. We further determine the optimal signaling bandwidth which shows that impedance matching is essential in both narrowband and broadband scenarios. We also examine the achievable rate in presence of interference showing that the size constraint is immaterial in interference-limited scenarios. Finally, our numerical results of the derived achievable rate as function of the antenna size and the SNR reveal new insights for the physically consistent design of radio systems.
△ Less
Submitted 16 July, 2021; v1 submitted 10 November, 2020;
originally announced November 2020.
-
DeepWiPHY: Deep Learning-based Receiver Design and Dataset for IEEE 802.11ax Systems
Authors:
Yi Zhang,
Akash Doshi,
Rob Liston,
Wai-tian Tan,
Xiaoqing Zhu,
Jeffrey G. Andrews,
Robert W. Heath
Abstract:
In this work, we develop DeepWiPHY, a deep learning-based architecture to replace the channel estimation, common phase error (CPE) correction, sampling rate offset (SRO) correction, and equalization modules of IEEE 802.11ax based orthogonal frequency division multiplexing (OFDM) receivers. We first train DeepWiPHY with a synthetic dataset, which is generated using representative indoor channel mod…
▽ More
In this work, we develop DeepWiPHY, a deep learning-based architecture to replace the channel estimation, common phase error (CPE) correction, sampling rate offset (SRO) correction, and equalization modules of IEEE 802.11ax based orthogonal frequency division multiplexing (OFDM) receivers. We first train DeepWiPHY with a synthetic dataset, which is generated using representative indoor channel models and includes typical radio frequency (RF) impairments that are the source of nonlinearity in wireless systems. To further train and evaluate DeepWiPHY with real-world data, we develop a passive sniffing-based data collection testbed composed of Universal Software Radio Peripherals (USRPs) and commercially available IEEE 802.11ax products. The comprehensive evaluation of DeepWiPHY with synthetic and real-world datasets (110 million synthetic OFDM symbols and 14 million real-world OFDM symbols) confirms that, even without fine-tuning the neural network's architecture parameters, DeepWiPHY achieves comparable performance to or outperforms the conventional WLAN receivers, in terms of both bit error rate (BER) and packet error rate (PER), under a wide range of channel models, signal-to-noise (SNR) levels, and modulation schemes.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Adaptive and Fast Combined Waveform-Beamforming Design for mmWave Automotive Joint Communication-Radar
Authors:
Preeti Kumari,
Nitin Jonathan Myers,
Robert W. Heath Jr
Abstract:
Millimeter-wave (mmWave) joint communication-radar (JCR) will enable high data rate communication and high-resolution radar sensing for applications such as autonomous driving. Prior JCR systems that are based on the mmWave communications hardware, however, suffer from a limited angular field-of-view and low estimation accuracy for radars due to the employed directional communication beam. In this…
▽ More
Millimeter-wave (mmWave) joint communication-radar (JCR) will enable high data rate communication and high-resolution radar sensing for applications such as autonomous driving. Prior JCR systems that are based on the mmWave communications hardware, however, suffer from a limited angular field-of-view and low estimation accuracy for radars due to the employed directional communication beam. In this paper, we propose an adaptive and fast combined waveform-beamforming design for the mmWave automotive JCR with a phased-array architecture that permits a trade-off between communication and radar performances. To rapidly estimate the mmWave automotive radar channel in the Doppler-angle domain with a wide field-of-view, our JCR design employs a few circulant shifts of the transmit beamformer and apply two-dimensional partial Fourier compressed sensing technique. We optimize these circulant shifts to achieve minimum coherence in compressed sensing. We evaluate the JCR performance trade-offs using a normalized mean square error (MSE) metric for radar estimation and a distortion MSE metric for data communication, which is analogous to the distortion metric in the rate distortion theory. Additionally, we develop a MSE-based weighted average optimization problem for the adaptive JCR combined waveform-beamforming design. Numerical results demonstrate that our proposed JCR design enables the estimation of short- and medium-range radar channels in the Doppler-angle domain with a low normalized MSE, at the expense of a small degradation in the communication distortion MSE.
△ Less
Submitted 5 September, 2020;
originally announced September 2020.
-
Hover or Perch: Comparing Capacity of Airborne and Landed Millimeter-Wave UAV Cells
Authors:
Vitaly Petrov,
Margarita Gapeyenko,
Dmitri Moltchanov,
Sergey Andreev,
Robert W. Heath Jr
Abstract:
On-demand deployments of millimeter-wave (mmWave) access points (APs) carried by unmanned aerial vehicles (UAVs) are considered today as a potential solution to enhance the performance of 5G+ networks. The battery lifetime of modern UAVs, though, limits the flight times in such systems. In this letter, we evaluate a feasible deployment alternative for temporary capacity boost in the areas with hig…
▽ More
On-demand deployments of millimeter-wave (mmWave) access points (APs) carried by unmanned aerial vehicles (UAVs) are considered today as a potential solution to enhance the performance of 5G+ networks. The battery lifetime of modern UAVs, though, limits the flight times in such systems. In this letter, we evaluate a feasible deployment alternative for temporary capacity boost in the areas with highly fluctuating user demands. The approach is to land UAV-based mmWave APs on the nearby buildings instead of hovering over the area. Within the developed mathematical framework, we compare the system-level performance of airborne and landed deployments by taking into account the full operation cycle of the employed drones. Our numerical results demonstrate that the choice of the UAV deployment option is determined by an interplay of the separation distance between the service area and the UAV charging station, drone battery lifetime, and the number of aerial APs in use. The presented methodology and results can support efficient on-demand deployments of UAV-based mmWave APs in prospective 5G+ networks.
△ Less
Submitted 26 July, 2020;
originally announced July 2020.
-
JCR70: A Low-Complexity Millimeter-Wave Proof-of-Concept Platform for A Fully-Digital MIMO Joint Communication-Radar
Authors:
Preeti Kumari,
Amine Mezghani,
Robert W. Heath, Jr
Abstract:
A fully-digital wideband joint communication-radar (JCR) with a multiple-input-multiple-output (MIMO) architecture at the millimeter-wave (mmWave) band will enable high joint communication and radar performance with enhanced design flexibility. A quantized receiver with few-bit analog-to-digital converters (ADCs) will enable a practical JCR solution with reduced power consumption for futuristic po…
▽ More
A fully-digital wideband joint communication-radar (JCR) with a multiple-input-multiple-output (MIMO) architecture at the millimeter-wave (mmWave) band will enable high joint communication and radar performance with enhanced design flexibility. A quantized receiver with few-bit analog-to-digital converters (ADCs) will enable a practical JCR solution with reduced power consumption for futuristic portable devices and autonomous vehicles. In this paper, we present a joint communication-radar proof-of-concept platform, named JCR70, to evaluate and demonstrate the performance of these JCR systems using real channel measurements in the 71-76 GHz band. We develop this platform by extending a mmWave communication set-up with an additional full-duplex radar receiver and by capturing the MIMO JCR channel using a moving antenna on a sliding rail. To characterize the JCR performance of our developed tested, we conduct several indoor and outdoor experiments and apply traditional as well as advanced processing algorithms on the measured data. Additionally, we compare the performance of our JCR70 platform with the INRAS Radarbook, which is a state-of-the-art automotive radar evaluation platform at 77 GHz. The results demonstrate that a quantized receiver with 2-4 bit ADCs generally performed quite close to the high-resolution ADC for a signal-to-noise ratio of up to 5 dB. Our JCR70 platform with a fully digital JCR waveform at 73 GHz and 2 GHz bandwidth achieved higher resolution capability than the Radarbook due to higher bandwidth and larger synthesized antenna aperture.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
InFocus: A spatial coding technique to mitigate misfocus in near field LoS beamforming
Authors:
Nitin Jonathan Myers,
Robert W. Heath Jr
Abstract:
Phased arrays, commonly used in IEEE 802.11ad and 5G radios, are capable of focusing radio frequency signals in a specific direction or a spatial region. Beamforming achieves such directional or spatial concentration of signals and enables phased array-based radios to achieve high data rates. Designing beams for millimeter wave and terahertz communication using massive phased arrays, however, is c…
▽ More
Phased arrays, commonly used in IEEE 802.11ad and 5G radios, are capable of focusing radio frequency signals in a specific direction or a spatial region. Beamforming achieves such directional or spatial concentration of signals and enables phased array-based radios to achieve high data rates. Designing beams for millimeter wave and terahertz communication using massive phased arrays, however, is challenging due to hardware constraints and the wide bandwidth in these systems. For example, beams which are optimal at the center frequency may perform poor in wideband communication systems where the radio frequencies differ substantially from the center frequency. The poor performance in such systems is due to differences in the optimal beamformers corresponding to distinct radio frequencies within the wide bandwidth. Such a mismatch leads to a misfocus effect in near field systems and the beam squint effect in far field systems. In this paper, we investigate the misfocus effect and propose InFocus, a low complexity technique to construct beams that are well suited for massive wideband phased arrays. The beams are constructed using a carefully designed frequency modulated waveform in the spatial dimension. For the special case of beamforming along the boresight of an array, this waveform is analogous to the frequency modulated continuous wave (FMCW) chirp signal in radar. InFocus mitigates beam misfocus and beam squint when applied to near field and far field systems. Simulation results indicate that InFocus enables massive wideband phased array-based radios to achieve higher data rates than comparable beamforming solutions.
△ Less
Submitted 8 March, 2021; v1 submitted 8 June, 2020;
originally announced June 2020.
-
Scheduling Observers Over a Shared Channel with Hard Delivery Deadlines
Authors:
Rebal Jurdi,
Jeffrey G. Andrews,
Robert W. Heath Jr
Abstract:
We abstract the core logical functions from applications that require ultra-low-latency wireless communications to provide a novel definition for reliability. Real-time applications -- such as intelligent transportation, remote surgery, and industrial automation -- involve a significant element of control and decision making. Such systems involve three logical components: observers (e.g. sensors)…
▽ More
We abstract the core logical functions from applications that require ultra-low-latency wireless communications to provide a novel definition for reliability. Real-time applications -- such as intelligent transportation, remote surgery, and industrial automation -- involve a significant element of control and decision making. Such systems involve three logical components: observers (e.g. sensors) measuring the state of an environment or dynamical system, a centralized executive (e.g. controller) deciding on the state, and agents (e.g. actuators) that implement the executive's decisions. The executive harvests the observers' measurements and decides on the short-term trajectory of the system by instructing its agents to take appropriate actions. All observation packets (typically uplink) and action packets (typically downlink) must be delivered by hard deadlines to ensure the proper functioning of the controlled system. In-full on-time delivery cannot be guaranteed in wireless systems due to inherent uncertainties in the channel such as fading and unpredictable interference; accordingly, the executive will have to drop some packets. We develop a novel framework to formulate the observer selection problem (OSP) through which the executive schedules a sequence of observations that maximize its knowledge about the current state of the system. To solve this problem efficiently yet optimally, we devise a branch-and-bound algorithm that systematically prunes the search space. Our work is different from existing work on real-time communications in that communication reliability is not conveyed by packet loss or error rate, but rather by the extent of the executive's knowledge about the state of the system it controls.
△ Less
Submitted 17 August, 2020; v1 submitted 12 February, 2020;
originally announced February 2020.
-
Leveraging Sensing at the Infrastructure for mmWave Communication
Authors:
Anum Ali,
Nuria González-Prelcic,
Robert W. Heath Jr.,
Amitava Ghosh
Abstract:
Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will b…
▽ More
Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will be part of future smart cities) for mmWave communication. We provide numerical and measurement results to demonstrate that information from these infrastructure sensors reduces the mmWave array configuration overhead. Finally, we outline future research directions to help materialize the use of infrastructure sensors for mmWave communication.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Optimization of Power Transfer Efficiency and Energy Efficiency for Wireless-Powered Systems with Massive MIMO
Authors:
Talha Ahmed Khan,
Ali Yazdan,
Robert W. Heath Jr
Abstract:
Massive MIMO is attractive for wireless information and energy transfer due to its ability to focus energy towards desired spatial locations. In this paper, the overall power transfer efficiency (PTE) and the energy efficiency (EE) of a wireless-powered massive MIMO system is investigated where a multi-antenna base-station (BS) uses wireless energy transfer to charge single-antenna energy harvesti…
▽ More
Massive MIMO is attractive for wireless information and energy transfer due to its ability to focus energy towards desired spatial locations. In this paper, the overall power transfer efficiency (PTE) and the energy efficiency (EE) of a wireless-powered massive MIMO system is investigated where a multi-antenna base-station (BS) uses wireless energy transfer to charge single-antenna energy harvesting users on the downlink. The users may exploit the harvested energy to transmit information to the BS on the uplink. The overall system performance is analyzed while accounting for the nonlinear nature of practical energy harvesters. First, for wireless energy transfer, the PTE is characterized using a scalable model for the BS circuit power consumption. The PTE-optimal number of BS antennas and users are derived. Then, for wireless energy and information transfer, the EE performance is characterized. The EE-optimal BS transmit power is derived in terms of the key system parameters such as the number of BS antennas and the number of users. As the number of antennas becomes large, increasing the transmit power improves the energy efficiency for moderate to large number of antennas. Simulation results suggest that it is energy efficient to operate the system in the massive antenna regime.
△ Less
Submitted 18 September, 2019;
originally announced September 2019.
-
Analysis of Intelligent Vehicular Relaying in Urban 5G+ Millimeter-Wave Cellular Deployments
Authors:
Vitaly Petrov,
Dmitri Moltchanov,
Sergey Andreev,
Robert W. Heath Jr
Abstract:
The capability of smarter networked devices to dynamically select appropriate radio connectivity options is especially important in the emerging millimeter-wave (mmWave) systems to mitigate abrupt link blockage in complex environments. To enrich the levels of diversity, mobile mmWave relays can be employed for improved connection reliability. These are considered by 3GPP for on-demand densificatio…
▽ More
The capability of smarter networked devices to dynamically select appropriate radio connectivity options is especially important in the emerging millimeter-wave (mmWave) systems to mitigate abrupt link blockage in complex environments. To enrich the levels of diversity, mobile mmWave relays can be employed for improved connection reliability. These are considered by 3GPP for on-demand densification on top of the static mmWave infrastructure. However, performance dynamics of mobile mmWave relaying is not nearly well explored, especially in realistic conditions, such as urban vehicular scenarios. In this paper, we develop a mathematical framework for the performance evaluation of mmWave vehicular relaying in a typical street deployment. We analyze and compare alternative connectivity strategies by quantifying the performance gains made available to smart devices in the presence of mmWave relays. We identify situations where the use of mmWave vehicular relaying is particularly beneficial. Our methodology and results can support further standardization and deployment of mmWave relaying in more intelligent 5G+ "all-mmWave" cellular networks.
△ Less
Submitted 16 August, 2019;
originally announced August 2019.
-
Message passing-based link configuration in short range millimeter wave systems
Authors:
Nitin Jonathan Myers,
Jarkko Kaleva,
Antti Tölli,
Robert W. Heath Jr
Abstract:
Millimeter wave (mmWave) communication in typical wearable and data center settings is short range. As the distance between the transmitter and the receiver in short range scenarios can be comparable to the length of the antenna arrays, the common far field approximation for the channel may not be applicable. As a result, dictionaries that result in a sparse channel representation in the far field…
▽ More
Millimeter wave (mmWave) communication in typical wearable and data center settings is short range. As the distance between the transmitter and the receiver in short range scenarios can be comparable to the length of the antenna arrays, the common far field approximation for the channel may not be applicable. As a result, dictionaries that result in a sparse channel representation in the far field setting may not be appropriate for short distances. In this paper, we develop a novel framework to exploit the structure in short range mmWave channels. The proposed method splits the channel into several subchannels for which the far field approximation can be applied. Then, the structure within and across different subchannels is leveraged using message passing. We show how information about the antenna array geometry can be used to design message passing factors that incorporate structure across successive subchannels. Simulation results indicate that our framework can be used to achieve better beam alignment with fewer channel measurements when compared to standard compressed sensing-based techniques that do not exploit structure across subchannels.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.
-
Adaptive Virtual Waveform Design for Millimeter-Wave Joint Communication-Radar
Authors:
Preeti Kumari,
Sergiy A. Vorobyov,
Robert W. Heath Jr
Abstract:
Joint communication and radar (JCR) waveforms with fully digital baseband generation and processing can now be realized at the millimeter-wave (mmWave) band. Prior work has proposed a mmWave wireless local area network (WLAN)-based JCR that exploits the WLAN preamble for radars. The performance of target velocity estimation, however, was limited. In this paper, we propose a virtual waveform design…
▽ More
Joint communication and radar (JCR) waveforms with fully digital baseband generation and processing can now be realized at the millimeter-wave (mmWave) band. Prior work has proposed a mmWave wireless local area network (WLAN)-based JCR that exploits the WLAN preamble for radars. The performance of target velocity estimation, however, was limited. In this paper, we propose a virtual waveform design for an adaptive mmWave JCR. The proposed system transmits a few non-uniformly placed preambles to construct several receive virtual preambles for enhancing velocity estimation accuracy, at the cost of only a small reduction in the communication data rate. We evaluate JCR performance trade-offs using the Cramer-Rao Bound (CRB) metric for radar estimation and a novel distortion minimum mean square error (MMSE) metric for data communication. Additionally, we develop three different MMSE-based optimization problems for the adaptive JCR waveform design. Simulations show that an optimal virtual (non-uniform) waveform achieves a significant performance improvement as compared to a uniform waveform. For a radar CRB constrained optimization, the optimal radar range of operation and the optimal communication distortion MMSE (DMMSE) are improved. For a communication DMMSE constrained optimization with a high DMMSE constraint, the optimal radar CRB is enhanced. For a weighted MMSE average optimization, the advantage of the virtual waveform over the uniform waveform is increased with decreased communication weighting. Comparison of MMSE-based optimization with traditional virtual preamble count-based optimization indicated that the conventional solution converges to the MMSE-based one only for a small number of targets and a high signal-to-noise ratio.
△ Less
Submitted 10 April, 2019;
originally announced April 2019.
-
Channel Estimation for Orthogonal Time Frequency Space (OTFS) Massive MIMO
Authors:
Wenqian Shen,
Linglong Dai,
Jianping An,
Pingzhi Fan,
Robert W. Heath, Jr
Abstract:
Orthogonal time frequency space (OTFS) modulation outperforms orthogonal frequency division multiplexing (OFDM) in high-mobility scenarios. One challenge for OTFS massive MIMO is downlink channel estimation due to the large number of base station antennas. In this paper, we propose a 3D structured orthogonal matching pursuit algorithm based channel estimation technique to solve this problem. First…
▽ More
Orthogonal time frequency space (OTFS) modulation outperforms orthogonal frequency division multiplexing (OFDM) in high-mobility scenarios. One challenge for OTFS massive MIMO is downlink channel estimation due to the large number of base station antennas. In this paper, we propose a 3D structured orthogonal matching pursuit algorithm based channel estimation technique to solve this problem. First, we show that the OTFS MIMO channel exhibits 3D structured sparsity: normal sparsity along the delay dimension, block sparsity along the Doppler dimension, and burst sparsity along the angle dimension. Based on the 3D structured channel sparsity, we then formulate the downlink channel estimation problem as a sparse signal recovery problem. Simulation results show that the proposed algorithm can achieve accurate channel state information with low pilot overhead.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Non-Stationarities in Extra-Large Scale Massive MIMO
Authors:
Elisabeth De Carvalho,
Anum Ali,
Abolfazl Amiri,
Marko Angjelichinoski,
Robert W. Heath Jr
Abstract:
Massive MIMO, a key technology for increasing area spectral efficiency in cellular systems, was developed assuming moderately sized apertures. In this paper, we argue that massive MIMO systems behave differently in large-scale regimes due to spatial non-stationarity. In the large-scale regime, with arrays of around fifty wavelengths, the terminals see the whole array but non-stationarities occur b…
▽ More
Massive MIMO, a key technology for increasing area spectral efficiency in cellular systems, was developed assuming moderately sized apertures. In this paper, we argue that massive MIMO systems behave differently in large-scale regimes due to spatial non-stationarity. In the large-scale regime, with arrays of around fifty wavelengths, the terminals see the whole array but non-stationarities occur because different regions of the array see different propagation paths. At even larger dimensions, which we call the extra-large scale regime, terminals see a portion of the array and inside the first type of non-stationarities might occur. We show that the non-stationarity properties of the massive MIMO channel changes several important MIMO design aspects. In simulations, we demonstrate how non-stationarity is a curse when neglected but a blessing when embraced in terms of computational load and multi-user transceiver design.
△ Less
Submitted 7 October, 2019; v1 submitted 7 March, 2019;
originally announced March 2019.
-
Spatial Channel Covariance Estimation for Hybrid Architectures Based on Tensor Decompositions
Authors:
Sungwoo Park,
Anum Ali,
Nuria González-Prelcic,
Robert W. Heath Jr
Abstract:
Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance…
▽ More
Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance estimation method based on higher-order tensor decomposition for spatially sparse time-varying frequency-selective channels. The proposed method leverages the fact that the channel can be represented as a low-rank higher-order tensor. We also derive the Cramér-Rao lower bound on the estimation accuracy of the proposed method. Numerical results and theoretical analysis show that the proposed tensor-based approach achieves higher estimation accuracy in comparison with prior compressive-sensing-based approaches or conventional angle-of-arrival estimation approaches. Simulation results reveal that the proposed approach becomes more beneficial at low signal-to-noise (SNR) region.
△ Less
Submitted 17 February, 2019;
originally announced February 2019.
-
Framework for a Perceptive Mobile Network using Joint Communication and Radar Sensing
Authors:
Md. Lushanur Rahman,
J. Andrew Zhang,
Xiaojing Huang,
Y. Jay Guo,
Robert W. Heath Jr
Abstract:
In this paper, we develop a framework for a novel perceptive mobile/cellular network that integrates radar sensing function into the mobile communication network. We propose a unified system platform that enables downlink and uplink sensing, sharing the same transmitted signals with communications. We aim to tackle the fundamental sensing parameter estimation problem in perceptive mobile networks,…
▽ More
In this paper, we develop a framework for a novel perceptive mobile/cellular network that integrates radar sensing function into the mobile communication network. We propose a unified system platform that enables downlink and uplink sensing, sharing the same transmitted signals with communications. We aim to tackle the fundamental sensing parameter estimation problem in perceptive mobile networks, by addressing two key challenges associated with sophisticated mobile signals and rich multipath in mobile networks. To extract sensing parameters from orthogonal frequency division multiple access (OFDMA) and spatial division multiple access (SDMA) communication signals, we propose two approaches to formulate it to problems that can be solved by compressive sensing techniques. Most sensing algorithms have limits on the number of multipath signals for their inputs. To reduce the multipath signals, as well as removing unwanted clutter signals, we propose a background subtraction method based on simple recursive computation, and provide a closed-form expression for performance characterization. The effectiveness of these methods is validated in simulations.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
MIMO Beampattern and Waveform Design with Low Resolution DACs
Authors:
Amine Mezghani,
Robert W. Heath
Abstract:
Digital beamforming and waveform generation techniques in MIMO radar offer enormous advantages in terms of flexibility and performance compared to conventional radar systems based on analog implementations. To allow for such fully digital design with an efficient hardware complexity, we consider the use of low resolution digital-to-analog converters (DACs) while maintaining a separate radio-freque…
▽ More
Digital beamforming and waveform generation techniques in MIMO radar offer enormous advantages in terms of flexibility and performance compared to conventional radar systems based on analog implementations. To allow for such fully digital design with an efficient hardware complexity, we consider the use of low resolution digital-to-analog converters (DACs) while maintaining a separate radio-frequency chain per antenna. A sum of squared residuals (SSR) formulation for the beampattern and spectral shaping problem is solved based on the Generalized Approximate Message Passing (GAMP) algorithm. Numerical results demonstrate good performance in terms of spectral shaping as well as cross-correlation properties of the different probing waveforms even with just 2-bit resolution per antenna.
△ Less
Submitted 23 December, 2018; v1 submitted 15 November, 2018;
originally announced November 2018.
-
Multibeam for Joint Communication and Sensing Using Steerable Analog Antenna Arrays
Authors:
J. Andrew Zhang,
Xiaojing Huang,
Y. Jay Guo,
Jinhong Yuan,
Robert W. Heath Jr
Abstract:
Beamforming has great potential for joint communication and sensing (JCAS), which is becoming a demanding feature on many emerging platforms such as unmanned aerial vehicles and smart cars. Although beamforming has been extensively studied for communication and radar sensing respectively, its application in the joint system is not straightforward due to different beamforming requirements by commun…
▽ More
Beamforming has great potential for joint communication and sensing (JCAS), which is becoming a demanding feature on many emerging platforms such as unmanned aerial vehicles and smart cars. Although beamforming has been extensively studied for communication and radar sensing respectively, its application in the joint system is not straightforward due to different beamforming requirements by communication and sensing. In this paper, we propose a novel multibeam framework using steerable analog antenna arrays, which allows seamless integration of communication and sensing. Different to conventional JCAS schemes that support JCAS using a single beam, our framework is based on the key innovation of multibeam technology: providing fixed subbeam for communication and packet-varying scanning subbeam for sensing, simultaneously from a single transmitting array. We provide a system architecture and protocols for the proposed framework, complying well with modern packet communication systems with multicarrier modulation. We also propose low-complexity and effective multibeam design and generation methods, which offer great flexibility in meeting different communication and sensing requirements. We further develop sensing parameter estimation algorithms using conventional digital Fourier transform and 1D compressive sensing techniques, matching well with the multibeam framework. Simulation results are provided and validate the effectiveness of our proposed framework, beamforming design methods and the sensing algorithms.
△ Less
Submitted 6 October, 2018;
originally announced October 2018.
-
Online Learning for Position-Aided Millimeter Wave Beam Training
Authors:
Vutha Va,
Takayuki Shimizu,
Gaurav Bansal,
Robert W. Heath Jr
Abstract:
Accurate beam alignment is essential for beam-based millimeter wave communications. Conventional beam sweeping solutions often have large overhead, which is unacceptable for mobile applications like vehicle-to-everything. Learning-based solutions that leverage sensor data like position to identify good beam directions are one approach to reduce the overhead. Most existing solutions, though, are su…
▽ More
Accurate beam alignment is essential for beam-based millimeter wave communications. Conventional beam sweeping solutions often have large overhead, which is unacceptable for mobile applications like vehicle-to-everything. Learning-based solutions that leverage sensor data like position to identify good beam directions are one approach to reduce the overhead. Most existing solutions, though, are supervised-learning where the training data is collected beforehand. In this paper, we use a multi-armed bandit framework to develop online learning algorithms for beam pair selection and refinement. The beam pair selection algorithm learns coarse beam directions in some predefined beam codebook, e.g., in discrete angles separated by the 3dB beamwidths. The beam refinement fine-tunes the identified directions to match the peak of the power angular spectrum at that position. The beam pair selection uses the upper confidence bound (UCB) with a newly proposed risk-aware feature, while the beam refinement uses a modified optimistic optimization algorithm. The proposed algorithms learn to recommend good beam pairs quickly. When using 16x16 arrays at both the transmitter and receiver, it can achieve on average 1dB gain over the exhaustive search (over 271x271 beam pairs) on the unrefined codebook within 100 time-steps with a training budget of only 30 beam pairs.
△ Less
Submitted 12 January, 2019; v1 submitted 9 September, 2018;
originally announced September 2018.