-
Deep Multi-Emitter Spectrum Occupancy Mapping that is Robust to the Number of Sensors, Noise and Threshold
Authors:
Abbas Termos,
Bertrand Hochwald
Abstract:
One of the primary goals in spectrum occupancy mapping is to create a system that is robust to assumptions about the number of sensors, occupancy threshold (in dBm), sensor noise, number of emitters and the propagation environment. We show that such a system may be designed with neural networks using a process of aggregation to allow a variable number of sensors during training and testing. This p…
▽ More
One of the primary goals in spectrum occupancy mapping is to create a system that is robust to assumptions about the number of sensors, occupancy threshold (in dBm), sensor noise, number of emitters and the propagation environment. We show that such a system may be designed with neural networks using a process of aggregation to allow a variable number of sensors during training and testing. This process transforms the variable number of measurements into approximate log-likelihood ratios (LLRs), which are fed as a fixed-resolution image into a neural network. The use of LLR's provides robustness to the effects of noise and occupancy threshold. In other words, a system may be trained for a nominal number of sensors, threshold and noise levels, and still operate well at various other levels without retraining. Our system operates without knowledge of the number of emitters and does not explicitly attempt to estimate their number or power. Receiver operating curves with realistic propagation environments using topographic maps with commercial network design tools show how performance of the neural network varies with the environment. The use of very low-resolution sensors in this system can still yield good performance.
△ Less
Submitted 11 February, 2023; v1 submitted 27 November, 2022;
originally announced December 2022.
-
A Training-Based Mutual Information Lower Bound for Large-Scale Systems
Authors:
Xiangbo Meng,
Kang Gao,
Bertrand M. Hochwald
Abstract:
We provide a mutual information lower bound that can be used to analyze the effect of training in models with unknown parameters. For large-scale systems, we show that this bound can be calculated using the difference between two derivatives of a conditional entropy function. The bound does not require explicit estimation of the unknown parameters. We provide a step-by-step process for computing t…
▽ More
We provide a mutual information lower bound that can be used to analyze the effect of training in models with unknown parameters. For large-scale systems, we show that this bound can be calculated using the difference between two derivatives of a conditional entropy function. The bound does not require explicit estimation of the unknown parameters. We provide a step-by-step process for computing the bound, and provide an example application. A comparison with known classical mutual information bounds is provided.
△ Less
Submitted 30 July, 2021;
originally announced August 2021.
-
Analyzing Training Using Phase Transitions in Entropy---Part I: General Theory
Authors:
Kang Gao,
Bertrand Hochwald
Abstract:
We analyze phase transitions in the conditional entropy of a sequence caused by a change in the conditional variables. Such transitions happen, for example, when training to learn the parameters of a system, since the transition from the training phase to the data phase causes a discontinuous jump in the conditional entropy of the measured system response. For large-scale systems, we present a met…
▽ More
We analyze phase transitions in the conditional entropy of a sequence caused by a change in the conditional variables. Such transitions happen, for example, when training to learn the parameters of a system, since the transition from the training phase to the data phase causes a discontinuous jump in the conditional entropy of the measured system response. For large-scale systems, we present a method of computing a bound on the mutual information obtained with one-shot training, and show that this bound can be calculated using the difference between two derivatives of a conditional entropy. The system model does not require Gaussianity or linearity in the parameters, and does not require worst-case noise approximations or explicit estimation of any unknown parameters. The model applies to a broad range of algorithms and methods in communication, signal processing, and machine learning that employ training as part of their operation.
△ Less
Submitted 6 January, 2021; v1 submitted 2 December, 2020;
originally announced December 2020.
-
Training-Based Equivalence Relations in Large-Scale Quantized Communication Systems
Authors:
Kang Gao,
Xiangbo Meng,
J. Nicholas Laneman,
Jonathan Chisum,
Ralf Bendlin,
Aditya Chopra,
Bertrand Hochwald
Abstract:
We show that a quantized large-scale system with unknown parameters and training signals can be analyzed by examining an equivalent system with known parameters by modifying the signal power and noise variance in a prescribed manner. Applications to training in wireless communications and signal processing are shown. In wireless communications, we show that the optimal number of training signals c…
▽ More
We show that a quantized large-scale system with unknown parameters and training signals can be analyzed by examining an equivalent system with known parameters by modifying the signal power and noise variance in a prescribed manner. Applications to training in wireless communications and signal processing are shown. In wireless communications, we show that the optimal number of training signals can be significantly smaller than the number of transmitting elements. Similar conclusions can be drawn when considering the symbol error rate in signal processing applications, as long as the number of receiving elements is large enough. We show that a linear analysis of training in a quantized system can be accurate when the thermal noise is high or the system is operating near its saturation rate.
△ Less
Submitted 4 August, 2021; v1 submitted 2 December, 2020;
originally announced December 2020.
-
Training for Channel Estimation in Nonlinear Multi-Antenna Transceivers
Authors:
Kang Gao,
J. Nicholas Laneman,
N. J. Estes,
Jonathan Chisum,
Bertrand Hochwald
Abstract:
Recent efforts to obtain high data rates in wireless systems have focused on what can be achieved in systems that have nonlinear or coarsely quantized transceiver architectures. Estimating the channel in such a system is challenging because the nonlinearities distort the channel estimation process. It is therefore of interest to determine how much training is needed to estimate the channel suffici…
▽ More
Recent efforts to obtain high data rates in wireless systems have focused on what can be achieved in systems that have nonlinear or coarsely quantized transceiver architectures. Estimating the channel in such a system is challenging because the nonlinearities distort the channel estimation process. It is therefore of interest to determine how much training is needed to estimate the channel sufficiently well so that the channel estimate can be used during data communication. We provide a way to determine how much training is needed by deriving a lower bound on the achievable rate in a training-based scheme that can be computed and analyzed even when the number of antennas is very large. This lower bound can be tight, especially at high SNR. One conclusion is that the optimal number of training symbols may paradoxically be smaller than the number of transmitters for systems with coarsely-quantized transceivers. We show how the training time can be strongly dependent on the number of receivers, and give an example where doubling the number of receivers reduces the training time by about 37 percent.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
New equivalent model of quantizer with noisy input and its application for ADC resolution determination in an uplink MIMO receiver
Authors:
Arkady Molev-Shteiman,
Xiao-Feng Qi,
Laurence Mailaender,
Narayan Prasad,
Bertrand Hochwald
Abstract:
When a quantizer input signal is the sum of the desired signal and input white noise, the quantization error is a function of total input signal. Our new equivalent model splits the quantization error into two components: a non-linear distortion (NLD) that is a function of only the desired part of input signal (without noise), and an equivalent out-put white noise. This separation is important bec…
▽ More
When a quantizer input signal is the sum of the desired signal and input white noise, the quantization error is a function of total input signal. Our new equivalent model splits the quantization error into two components: a non-linear distortion (NLD) that is a function of only the desired part of input signal (without noise), and an equivalent out-put white noise. This separation is important because these two terms affect MIMO system performance differently. This paper introduces our model, and applies it to determine the minimal Analog-to-Digital Converter (ADC) resolution necessary to operate a conventional MIMO receiver with negligible performance degradation. We also provide numerical simulations to confirm the theory. Broad ramifications of our model are further demonstrated in two companion papers presenting low-complexity suppression of the NLD arising from insufficient ADC resolution, and a digital dithering that significantly reduces the MIMO transmitter Digital-to-Analog Converters (DAC) resolution requirement.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
Capacity of Multiple One-Bit Transceivers in a Rayleigh Environment
Authors:
Kang Gao,
J. Nicholas Laneman,
Bertrand Hochwald
Abstract:
We analyze the channel capacity of a system with a large number of one-bit transceivers in a classical Rayleigh environment with perfect channel information at the receiver. With $M$ transmitters and $N=αM$ receivers, we derive an expression of the capacity per transmitter $\mathcal{C}$, where $\mathcal{C}\leq\min(1,α)$, as a function of $α$ and signal-to-noise ratio (SNR) $ρ$, when $M\to\infty$.…
▽ More
We analyze the channel capacity of a system with a large number of one-bit transceivers in a classical Rayleigh environment with perfect channel information at the receiver. With $M$ transmitters and $N=αM$ receivers, we derive an expression of the capacity per transmitter $\mathcal{C}$, where $\mathcal{C}\leq\min(1,α)$, as a function of $α$ and signal-to-noise ratio (SNR) $ρ$, when $M\to\infty$. We show that our expression is a good approximation for small $M$, and provide simple approximations of $\mathcal{C}$ for various ranges of $α$ and SNR $ρ$. We conclude that at high SNR, $\mathcal{C}$ reaches its upper limit of one only if the ratio $α>1.24$. Expressions for determining when $\mathcal{C}$ "saturates" as a function of $α$ and $ρ$ are given.
△ Less
Submitted 21 April, 2018;
originally announced April 2018.
-
Beamforming with Multiple One-Bit Wireless Transceivers
Authors:
Kang Gao,
J. Nicholas Laneman,
Bertrand Hochwald
Abstract:
Classical beamforming techniques rely on highly linear transmitters and receivers to allow phase-coherent combining at the transmitter and receiver. The transmitter uses beamforming to steer signal power towards the receiver, and the receiver uses beamforming to gather and coherently combine the signals from multiple receiver antennas. When the transmitters and receivers are instead constrained fo…
▽ More
Classical beamforming techniques rely on highly linear transmitters and receivers to allow phase-coherent combining at the transmitter and receiver. The transmitter uses beamforming to steer signal power towards the receiver, and the receiver uses beamforming to gather and coherently combine the signals from multiple receiver antennas. When the transmitters and receivers are instead constrained for power and cost reasons to be non-linear one-bit devices, the potential advantages and performance metrics associated with beamforming are not as well understood. We define beamforming at the transmitter as a codebook design problem to maximize the minimum distance between codewords. We define beamforming at the receiver as the maximum likelihood detector of the transmitted codeword. We show that beamforming with one-bit transceivers is a constellation design problem, and that we can come within a few dB SNR of the capacity attained by linear transceivers.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Beamforming Codebook Compensation for Beam Squint with Channel Capacity Constraint
Authors:
Mingming Cai,
J. Nicholas Laneman,
Bertrand Hochwald
Abstract:
Analog beamforming with phased arrays is a promising technique for 5G wireless communication in millimeter wave bands. A beam focuses on a small range of angles of arrival or departure and corresponds to a set of fixed phase shifts across frequency due to practical hardware constraints. In switched beamforming, a discrete codebook consisting of multiple beams is used to cover a larger angle range.…
▽ More
Analog beamforming with phased arrays is a promising technique for 5G wireless communication in millimeter wave bands. A beam focuses on a small range of angles of arrival or departure and corresponds to a set of fixed phase shifts across frequency due to practical hardware constraints. In switched beamforming, a discrete codebook consisting of multiple beams is used to cover a larger angle range. However, for sufficiently large bandwidth, the gain provided by the phased array is frequency dependent even if the radiation pattern of the antenna elements is frequency independent, an effect called beam squint. This paper shows that the beam squint reduces channel capacity of a uniform linear array (ULA). The beamforming codebook is designed to compensate for the beam squint by imposing a channel capacity constraint. For example, our codebook design algorithm can improve the channel capacity by 17.8% for a ULA with 64 antennas operating at bandwidth of 2.5 GHz and carrier frequency of 73 GHz. Analysis and numerical examples suggest that a denser codebook is required to compensate for the beam squint compared to the case without beam squint. Furthermore, the effect of beam squint is shown to increase as bandwidth increases, and the beam squint limits the bandwidth given the number of antennas in the array.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Beampattern-Based Tracking for Millimeter Wave Communication Systems
Authors:
Kang Gao,
Mingming Cai,
Ding Nie,
Bertrand Hochwald,
J. Nicholas Laneman,
Huang Huang,
Kunpeng Liu
Abstract:
We present a tracking algorithm to maintain the communication link between a base station (BS) and a mobile station (MS) in a millimeter wave (mmWave) communication system, where antenna arrays are used for beamforming in both the BS and MS. Downlink transmission is considered, and the tracking is performed at the MS as it moves relative to the BS. Specifically, we consider the case that the MS ro…
▽ More
We present a tracking algorithm to maintain the communication link between a base station (BS) and a mobile station (MS) in a millimeter wave (mmWave) communication system, where antenna arrays are used for beamforming in both the BS and MS. Downlink transmission is considered, and the tracking is performed at the MS as it moves relative to the BS. Specifically, we consider the case that the MS rotates quickly due to hand movement. The algorithm estimates the angle of arrival (AoA) by using variations in the radiation pattern of the beam as a function of this angle. Numerical results show that the algorithm achieves accurate beam alignment when the MS rotates in a wide range of angular speeds. For example, the algorithm can support angular speeds up to 800 degrees per second when tracking updates are available every 10 ms.
△ Less
Submitted 15 December, 2016;
originally announced December 2016.
-
RadioHound: A Pervasive Sensing Network for Sub-6 GHz Dynamic Spectrum Monitoring
Authors:
Nikolaus Kleber,
Jonathan Chisum,
Aaron Striegel,
Bertrand Hochwald,
Abbas Termos,
J. Nicholas Laneman,
Zuohui Fu,
John Merritt
Abstract:
We design a custom spectrum sensing network, called RadioHound, capable of tuning from 25 MHz to 6 GHz, which covers nearly all widely-deployed wireless activity. We describe the system hardware and network infrastructure in detail with a view towards driving the cost, size, and power usage of the sensors as low as possible. The system estimates the spatial variation of radio-frequency power from…
▽ More
We design a custom spectrum sensing network, called RadioHound, capable of tuning from 25 MHz to 6 GHz, which covers nearly all widely-deployed wireless activity. We describe the system hardware and network infrastructure in detail with a view towards driving the cost, size, and power usage of the sensors as low as possible. The system estimates the spatial variation of radio-frequency power from an unknown random number of sources. System performance is measured by computing the mean square error against a simulated radio-frequency environment. We find that the system performance depends heavily on the deployment density of the sensors. Consequently, we derive an expression for the sensor density as a function of environmental characteristics and confidence in measurement quality.
△ Less
Submitted 19 October, 2016;
originally announced October 2016.
-
Effect of Wideband Beam Squint on Codebook Design in Phased-Array Wireless Systems
Authors:
Mingming Cai,
Kang Gao,
Ding Nie,
Bertrand Hochwald,
J. Nicholas Laneman,
Huang Huang,
Kunpeng Liu
Abstract:
Analog beamforming with phased arrays is a promising technique for 5G wireless communication at millimeter wave frequencies. Using a discrete codebook consisting of multiple analog beams, each beam focuses on a certain range of angles of arrival or departure and corresponds to a set of fixed phase shifts across frequency due to practical hardware considerations. However, for sufficiently large ban…
▽ More
Analog beamforming with phased arrays is a promising technique for 5G wireless communication at millimeter wave frequencies. Using a discrete codebook consisting of multiple analog beams, each beam focuses on a certain range of angles of arrival or departure and corresponds to a set of fixed phase shifts across frequency due to practical hardware considerations. However, for sufficiently large bandwidth, the gain provided by the phased array is actually frequency dependent, which is an effect called beam squint, and this effect occurs even if the radiation pattern of the antenna elements is frequency independent. This paper examines the nature of beam squint for a uniform linear array (ULA) and analyzes its impact on codebook design as a function of the number of antennas and system bandwidth normalized by the carrier frequency. The criterion for codebook design is to guarantee that each beam's minimum gain for a range of angles and for all frequencies in the wideband system exceeds a target threshold, for example 3 dB below the array's maximum gain. Analysis and numerical examples suggest that a denser codebook is required to compensate for beam squint. For example, 54% more beams are needed compared to a codebook design that ignores beam squint for a ULA with 32 antennas operating at a carrier frequency of 73 GHz and bandwidth of 2.5 GHz. Furthermore, beam squint with this design criterion limits the bandwidth or the number of antennas of the array if the other one is fixed.
△ Less
Submitted 22 September, 2016; v1 submitted 11 September, 2016;
originally announced September 2016.
-
Bandwidth Analysis of Multiport Radio-Frequency Systems
Authors:
Ding Nie,
Bertrand M. Hochwald
Abstract:
When multiple radio-frequency sources are connected to multiple loads through a passive multiport matching network, perfect power transfer to the loads across all frequencies is generally impossible. In this two-part paper, we provide analyses of bandwidth over which power transfer is possible. Our principal tools include broadband multiport matching upper bounds, presented herein, on the integral…
▽ More
When multiple radio-frequency sources are connected to multiple loads through a passive multiport matching network, perfect power transfer to the loads across all frequencies is generally impossible. In this two-part paper, we provide analyses of bandwidth over which power transfer is possible. Our principal tools include broadband multiport matching upper bounds, presented herein, on the integral over all frequency of the logarithm of a suitably defined power loss ratio. In general, the larger the integral, the larger the bandwidth over which power transfer can be accomplished. We apply these bounds in several ways: We show how the number of sources and loads, and the coupling between loads, affect achievable bandwidth. We analyze the bandwidth of networks constrained to have certain architectures. We characterize systems whose bandwidths scale as the ratio between the numbers of loads and sources.
The first part of the paper presents the bounds and uses them to analyze loads whose frequency responses can be represented by analytical circuit models. The second part analyzes the bandwidth of realistic loads whose frequency responses are available numerically. We provide applications to wireless transmitters where the loads are antennas being driven by amplifiers. The derivations of the bounds are also included.
△ Less
Submitted 15 March, 2017; v1 submitted 7 September, 2015;
originally announced September 2015.
-
Achieving Near-Capacity at Low SNR on a Multiple-Antenna Multiple-User Channel
Authors:
Chau Yuen,
Bertrand M. Hochwald
Abstract:
We analyze the sensitivity of the capacity of a multi-antenna multi-user system to the number of users being served. We show analytically that, for a given desired sum-rate, the extra power needed to serve a subset of the users at low SNR (signal-to-noise ratio) can be very small, and is generally much smaller than the extra power needed to serve the same subset at high SNR. The advantages of se…
▽ More
We analyze the sensitivity of the capacity of a multi-antenna multi-user system to the number of users being served. We show analytically that, for a given desired sum-rate, the extra power needed to serve a subset of the users at low SNR (signal-to-noise ratio) can be very small, and is generally much smaller than the extra power needed to serve the same subset at high SNR. The advantages of serving only subsets of the users are many: multi-user algorithms have lower complexity, reduced channel-state information requirements, and, often, better performance. We provide guidelines on how many users to serve to get near-capacity performance with low complexity. For example, we show how in an eight-antenna eight-user system we can serve only four users and still be approximately 2 dB from capacity at very low SNR.
△ Less
Submitted 20 June, 2008;
originally announced June 2008.
