-
Distributed Precoding for Satellite-Terrestrial Integrated Networks Without Sharing CSIT: A Rate-Splitting Approach
Authors:
Doseon Kim,
Sungyoon Cho,
Wonjae Shin,
Jeonghun Park,
Dong Ku Kim
Abstract:
Satellite-terrestrial integrated networks (STINs) are promising architecture for providing global coverage. In STINs, full frequency reuse between a satellite and a terrestrial base station (BS) is encouraged for aggressive spectrum reuse, which induces non-negligible amount of interference. To address the interference management problem in STINs, this paper proposes a novel distributed precoding…
▽ More
Satellite-terrestrial integrated networks (STINs) are promising architecture for providing global coverage. In STINs, full frequency reuse between a satellite and a terrestrial base station (BS) is encouraged for aggressive spectrum reuse, which induces non-negligible amount of interference. To address the interference management problem in STINs, this paper proposes a novel distributed precoding method. Key features of our method are: i) a rate-splitting (RS) strategy is incorporated for efficient interference management and ii) the precoders are designed in a distributed way without sharing channel state information between a satellite and a terrestrial BS. Specifically, to design the precoders in a distributed fashion, we put forth a spectral efficiency decoupling technique, that disentangles the total spectral efficiency function into two distinct terms, each of which is dependent solely on the satellite's precoder and the terrestrial BS's precoder, respectively. Then, to resolve the non-smoothness raised by the RS strategy, we approximate the spectral efficiency expression as a smooth function by using the LogSumExp technique; thereafter we develop a generalized power iteration inspired optimization algorithm built based on the first-order optimality condition. Simulation results demonstrate that the proposed method offers considerable spectral efficiency gains compared to the existing methods.
△ Less
Submitted 20 August, 2024; v1 submitted 12 September, 2023;
originally announced September 2023.
-
Beam Squint in Ultra-wideband mmWave Systems: RF Lens Array vs. Phase-Shifter-Based Array
Authors:
Sang-Hyun Park,
Byoungnam Kim,
Dong Ku Kim,
Linglong Dai,
Kai-Kit Wong,
Chan-Byoung Chae
Abstract:
In this article, we discuss the potential of radio frequency (RF) lens for ultra-wideband millimeter-wave (mmWave) systems. In terms of the beam squint, we compare the proposed RF lens antenna with the phase shifter-based array for hybrid beamforming. To reduce the complexities for fully digital beamforming, researchers have come up with RF lens-based hybrid beamforming. The use of mmWave systems,…
▽ More
In this article, we discuss the potential of radio frequency (RF) lens for ultra-wideband millimeter-wave (mmWave) systems. In terms of the beam squint, we compare the proposed RF lens antenna with the phase shifter-based array for hybrid beamforming. To reduce the complexities for fully digital beamforming, researchers have come up with RF lens-based hybrid beamforming. The use of mmWave systems, however, causes an increase in bandwidth, which gives rise to the beam squint phenomenon. We first find the causative factors for beam squint in the dielectric RF lens antenna. Based on the beamforming gain at each frequency, we verify that, in a specific situation, RF lens can be free of the beam squint effect. We use 3D electromagnetic analysis software to numerically interpret the beam squint of each antenna type. Based on the results, we present the degraded spectral efficiency by system-level simulations with 3D indoor ray tracing. Finally, to verify our analysis, we fabricate an actual RF lens antenna and demonstrate the real performance using a mmWave, NI PXIe, software-defined radio system.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Secure Transmission for Hierarchical Information Accessibility in Downlink MU-MIMO
Authors:
Kanguk Lee,
Jinseok Choi,
Dong Ku Kim,
Jeonghun Park
Abstract:
Physical layer security is a useful tool to prevent confidential information from wiretapping. In this paper, we consider a generalized model of conventional physical layer security, referred to as hierarchical information accessibility (HIA). A main feature of the HIA model is that a network has a hierarchy in information accessibility, wherein decoding feasibility is determined by a priority of…
▽ More
Physical layer security is a useful tool to prevent confidential information from wiretapping. In this paper, we consider a generalized model of conventional physical layer security, referred to as hierarchical information accessibility (HIA). A main feature of the HIA model is that a network has a hierarchy in information accessibility, wherein decoding feasibility is determined by a priority of users. Under this HIA model, we formulate a sum secrecy rate maximization problem with regard to precoding vectors. This problem is challenging since multiple non-smooth functions are involved into the secrecy rate to fulfill the HIA conditions and also the problem is non-convex. To address the challenges, we approximate the minimum function by using the LogSumExp technique, thereafter obtain the first-order optimality condition. One key observation is that the derived condition is cast as a functional eigenvalue problem, where the eigenvalue is equivalent to the approximated objective function of the formulated problem. Accordingly, we show that finding a principal eigenvector is equivalent to finding a local optimal solution. To this end, we develop a novel method called generalized power iteration for HIA (GPI-HIA). Simulations demonstrate that the GPI-HIA significantly outperforms other baseline methods in terms of the secrecy rate.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Demo: MmWave Lens MIMO
Authors:
Sang-Hyun Park,
Dongsoo Jun,
Byoungnam Kim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
In fifth-generation (5G) communication, the RF lens antenna is introduced with advantages of high antenna gain and low hardware cost in analog/digital hybrid beamforming technology. In this paper, we design and manufacture the appropriate RF lens antenna for mmWave communication identified in simulation analysis and present a real-time mmWave lens MIMO testbed. Furthermore, in conventional phase-s…
▽ More
In fifth-generation (5G) communication, the RF lens antenna is introduced with advantages of high antenna gain and low hardware cost in analog/digital hybrid beamforming technology. In this paper, we design and manufacture the appropriate RF lens antenna for mmWave communication identified in simulation analysis and present a real-time mmWave lens MIMO testbed. Furthermore, in conventional phase-shift MIMO, beam-squint, a problem caused by the wideband of mmWave communication, is estimated with the fabricated RF lens antenna.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Ultrareliable and Low-Latency Communication Techniques for Tactile Internet Services
Authors:
Kwang Soon Kim,
Dong Ku Kim,
Chan-Byoung Chae,
Sunghyun Choi,
Young-Chai Ko,
Jonghyun Kim,
Yeon-Geun Lim,
Minho Yang,
Sundo Kim,
Byungju Lim,
Kwanghoon Lee,
Kyung Lin Ryu
Abstract:
This paper presents novel ultrareliable and low-latency communication (URLLC) techniques for URLLC services, such as Tactile Internet services. Among typical use-cases of URLLC services are tele-operation, immersive virtual reality, cooperative automated driving, and so on. In such URLLC services, new kinds of traffic such as haptic information including kinesthetic information and tactile informa…
▽ More
This paper presents novel ultrareliable and low-latency communication (URLLC) techniques for URLLC services, such as Tactile Internet services. Among typical use-cases of URLLC services are tele-operation, immersive virtual reality, cooperative automated driving, and so on. In such URLLC services, new kinds of traffic such as haptic information including kinesthetic information and tactile information need to be delivered in addition to high-quality video and audio traffic in traditional multimedia services. Further, such a variety of traffic has various characteristics in terms of packet sizes and data rates with a variety of requirements of latency and reliability. Furthermore, some traffic may occur in a sporadic manner but require reliable delivery of packets of medium to large sizes within a low latency, which is not supported by current state-of-the-art wireless communication systems and is very challenging for future wireless communication systems. Thus, to meet such a variety of tight traffic requirements in a wireless communication system, novel technologies from the physical layer to the network layer need to be devised. In this paper, some novel physical layer technologies such as waveform multiplexing, multiple access scheme, channel code design, synchronization, and full-duplex transmission for spectrally-efficient URLLC are introduced. In addition, a novel performance evaluation approach, which combines a ray-tracing tool and system-level simulation, is suggested for evaluating the performance of the proposed schemes. Simulation results show the feasibility of the proposed schemes providing realistic URLLC services in realistic geographical environments, which encourages further efforts to substantiate the proposed work.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
RF Lens-Embedded Antenna Array for mmWave MIMO: Design and Performance
Authors:
Yae Jee Cho,
Gee-Yong Suk,
Byoungnam Kim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmW…
▽ More
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmWave demonstrates promising performance in achieving high gain and directivity by using phase shifters at the analog processing block. What remains a problem, however, is the actual implementation of mmWave beamforming systems; to fabricate such a system is costly and complex. With the aim of reducing such cost and complexity, this article presents actual prototypes of the lens antenna as an effective device to be used in the future 5G mmWave hybrid beamforming systems. Using a lens as a passive phase shifter enables beamforming without the heavy network of active phase shifters, while gain and directivity are achieved by the energy-focusing property of the lens. Proposed in this article are two types of lens antennas, one for static and the other for mobile usage. Their performance is evaluated using measurements and simulation data along with link-level analysis via a software defined radio (SDR) platform. Results show the promising potential of the lens antenna for its high gain and directivity, and its improved beam-switching feasibility compared to when a lens is not used. System-level evaluations reveal the significant throughput enhancement in both real indoor and outdoor environments. Moreover, the lens antenna's design issues are also discussed by evaluating different lens sizes.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
-
Compact Full Duplex MIMO Radios in D2D Underlaid Cellular Networks: From System Design to Prototype Results
Authors:
MinKeun Chung,
Min Soo Sim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
This paper considers the implementation and application possibilities of a compact full duplex multiple-input multiple-output (MIMO) architecture where direct communication exists between users, e.g., device-to-device (D2D) and cellular link coexisting on the same spectrum. For the architecture of the compact full duplex radio, we combine an analog self-interference canceler based dual-polarizatio…
▽ More
This paper considers the implementation and application possibilities of a compact full duplex multiple-input multiple-output (MIMO) architecture where direct communication exists between users, e.g., device-to-device (D2D) and cellular link coexisting on the same spectrum. For the architecture of the compact full duplex radio, we combine an analog self-interference canceler based dual-polarization with high cross-polarization discrimination (XPD) and Long Term Evolution (LTE)-based per-subcarrier digital self-interference canceler. While we consider the compactness and power efficiency of an analog solution, we focus on the digital canceler design with robustness to a frequency-selective channel and high compatibility with a conventional LTE system. For an over-the-air wireless experiment of full duplex testbed with a two-user-pair, we implement a full duplex MIMO physical layer (PHY), supporting 20 MHz bandwidth, on an FPGA-based software-defined radio platform. Further, we propose a novel timing synchronization method to construct a more viable full duplex MIMO link. By having the full duplex link prototype fully operating in real-time, we present the first characterization of the proposed compact full duplex MIMO performance depending on the transmit power of the full duplex node. We also show the link quality between nodes. One of the crucial insights of this work is that the full duplex operation of a user is capable of acquiring the throughput gain if the user has self-interference capability with guaranteed performance.
△ Less
Submitted 17 March, 2017; v1 submitted 19 December, 2016;
originally announced December 2016.
-
Cramer-Rao Lower Bound for DoA Estimation with RF Lens-Embedded Antenna Array
Authors:
Jae-Nam Shim,
Hongseok Park,
GeeYong Suk,
Chan-Byoung Chae,
Dong Ku Kim
Abstract:
In this paper, we consider the Cramer-Rao lower bound (CRLB) for estimation of a lens-embedded antenna array with deterministic parameters. Unlike CRLB of uniform linear array (ULA), it is noted that CRLB for direction of arrival (DoA) of lens-embedded antenna array is dominated by not only angle but characteristics of lens. Derivation is based on the approximation that amplitude of received signa…
▽ More
In this paper, we consider the Cramer-Rao lower bound (CRLB) for estimation of a lens-embedded antenna array with deterministic parameters. Unlike CRLB of uniform linear array (ULA), it is noted that CRLB for direction of arrival (DoA) of lens-embedded antenna array is dominated by not only angle but characteristics of lens. Derivation is based on the approximation that amplitude of received signal with lens is approximated to Gaussian function. We confirmed that parameters needed to design a lens can be derived by standard deviation of Gaussian, which represents characteristic of received signal, by simulation of beam propagation method. Well-designed lens antenna shows better performance than ULA in terms of estimating DoA. This is a useful derivation because, result can be the guideline for designing parameters of lens to satisfy certain purpose.
△ Less
Submitted 13 December, 2016;
originally announced December 2016.
-
Nonlinear Self-Interference Cancellation for Full-Duplex Radios: From Link- and System-Level Performance Perspectives
Authors:
Min Soo Sim,
MinKeun Chung,
Dongkyu Kim,
Jaehoon Chung,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
One of the promising technologies for LTE Evolution is full-duplex radio, an innovation is expected to double the spectral efficiency. To realize full-duplex in practice, the main challenge is overcoming self-interference, and to do so, researchers have developed self-interference cancellation techniques. Since most wireless transceivers use power amplifiers, especially in cellular systems, resear…
▽ More
One of the promising technologies for LTE Evolution is full-duplex radio, an innovation is expected to double the spectral efficiency. To realize full-duplex in practice, the main challenge is overcoming self-interference, and to do so, researchers have developed self-interference cancellation techniques. Since most wireless transceivers use power amplifiers, especially in cellular systems, researchers have revealed the importance of nonlinear self-interference cancellation. In this article, we first explore several nonlinear digital self-interference cancellation techniques. We then propose a low complexity pre-calibration-based nonlinear digital self-interference cancellation technique. Next we discuss issues about reference signal allocation and the overhead of each technique. For performance evaluations, we carry out extensive measurements through a real-time prototype and link-/system-level simulations. For link-level analysis, we measure the amount of cancelled self-interference for each technique. We also evaluate system-level performances through 3D ray-tracing-based simulations. Numerical results confirm the significant performance improvement over a half-duplex system even in interference-limited indoor environments.
△ Less
Submitted 14 February, 2017; v1 submitted 7 July, 2016;
originally announced July 2016.
-
Degrees of Freedom of Full-Duplex Cellular Networks with Reconfigurable Antennas at Base Station
Authors:
Minho Yang,
Sang-Woon Jeon,
Dong Ku Kim
Abstract:
Full-duplex (FD) cellular networks are considered in which a FD base station (BS) simultaneously supports a set of half-duplex (HD) downlink (DL) users and a set of HD uplink (UL) users. The transmitter and the receiver of the BS are equipped with reconfigurable antennas, each of which can choose its transmit or receive mode from several preset modes. Under the no self-interference assumption aris…
▽ More
Full-duplex (FD) cellular networks are considered in which a FD base station (BS) simultaneously supports a set of half-duplex (HD) downlink (DL) users and a set of HD uplink (UL) users. The transmitter and the receiver of the BS are equipped with reconfigurable antennas, each of which can choose its transmit or receive mode from several preset modes. Under the no self-interference assumption arisen from FD operation at the BS, the sum degrees of freedom (DoF) of FD cellular networks is investigated for both no channel state information at the transmit side (CSIT) and partial CSIT. In particular, the sum DoF is completely characterized for no CSIT model and an achievable sum DoF is established for the partial CSIT model, which improves the sum DoF of the conventional HD cellular networks. For both no CSIT and partial CSIT models, the results show that the FD BS with reconfigurable antennas can double the sum DoF even in the presence of user-to-user interference as both the numbers of DL and UL users and preset modes increase. It is further demonstrated that such DoF improvement indeed yields the sum rate improvement at the finite and operational signal-to-noise ratio regime.
△ Less
Submitted 14 November, 2016; v1 submitted 27 April, 2016;
originally announced April 2016.
-
A Desired PAR-Achieving Precoder Design for Multi-User MIMO OFDM based on Concentration of Measure
Authors:
Hyun-Su Cha,
Dong Ku Kim
Abstract:
For multi-user multiple-input and multiple-output (MIMO) wireless communications in orthogonal frequency di- vision multiplexing systems, we propose a MIMO precoding scheme providing a desired peak-to-average power ratio (PAR) at the minimum cost that is defined as received SNR degradation. By taking advantage of the concentration of measure, we formulate a convex problem with constraint on the de…
▽ More
For multi-user multiple-input and multiple-output (MIMO) wireless communications in orthogonal frequency di- vision multiplexing systems, we propose a MIMO precoding scheme providing a desired peak-to-average power ratio (PAR) at the minimum cost that is defined as received SNR degradation. By taking advantage of the concentration of measure, we formulate a convex problem with constraint on the desired PAR. Consequently, the proposed scheme almost exactly achieves the desired PAR on average, and asymptotically attains the desired PAR at the 0.001 point of its complementary cumulative distribution function, as the number of subcarriers increases.
△ Less
Submitted 1 November, 2016; v1 submitted 7 March, 2016;
originally announced March 2016.
-
Deep Neural Network for Real-Time Autonomous Indoor Navigation
Authors:
Dong Ki Kim,
Tsuhan Chen
Abstract:
Autonomous indoor navigation of Micro Aerial Vehicles (MAVs) possesses many challenges. One main reason is that GPS has limited precision in indoor environments. The additional fact that MAVs are not able to carry heavy weight or power consuming sensors, such as range finders, makes indoor autonomous navigation a challenging task. In this paper, we propose a practical system in which a quadcopter…
▽ More
Autonomous indoor navigation of Micro Aerial Vehicles (MAVs) possesses many challenges. One main reason is that GPS has limited precision in indoor environments. The additional fact that MAVs are not able to carry heavy weight or power consuming sensors, such as range finders, makes indoor autonomous navigation a challenging task. In this paper, we propose a practical system in which a quadcopter autonomously navigates indoors and finds a specific target, i.e., a book bag, by using a single camera. A deep learning model, Convolutional Neural Network (ConvNet), is used to learn a controller strategy that mimics an expert pilot's choice of action. We show our system's performance through real-time experiments in diverse indoor locations. To understand more about our trained network, we use several visualization techniques.
△ Less
Submitted 26 November, 2015; v1 submitted 15 November, 2015;
originally announced November 2015.
-
Smart Small Cell with Hybrid Beamforming for 5G: Theoretical Feasibility and Prototype Results
Authors:
Jinyoung Jang,
MinKeun Chung,
Hae Gwang Hwang,
Yeon-Geun Lim,
Hong-jib Yoon,
TaeckKeun Oh,
Byung-Wook Min,
Yongshik Lee,
Kwang Soon Kim,
Chan-Byoung Chae,
Dong Ku Kim
Abstract:
In this article, we present a real-time three dimensional (3D) hybrid beamforming for fifth generation (5G) wireless networks. One of the key concepts in 5G cellular systems is the small cell network, which settles the high mobile traffic demand and provides uniform user-experienced data rates. The overall capacity of the small cell network can be enhanced with the enabling technology of 3D hybrid…
▽ More
In this article, we present a real-time three dimensional (3D) hybrid beamforming for fifth generation (5G) wireless networks. One of the key concepts in 5G cellular systems is the small cell network, which settles the high mobile traffic demand and provides uniform user-experienced data rates. The overall capacity of the small cell network can be enhanced with the enabling technology of 3D hybrid beamforming. This study validates the feasibility of the 3D hybrid beamforming, mostly for link-level performances, through the implementation of a realtime testbed using a software-defined radio (SDR) platform and fabricated antenna array. Based on the measured data, we also investigate system-level performances to verify the gain of the proposed smart small cell system over long term evolution (LTE) systems by performing system-level simulations based on a 3D ray-tracing tool.
△ Less
Submitted 12 March, 2016; v1 submitted 30 June, 2015;
originally announced June 2015.
-
Prototyping Real-Time Full Duplex Radios
Authors:
MinKeun Chung,
Min Soo Sim,
Jaeweon Kim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
In this article, we present a real-time full duplex radio system for 5G wireless networks. Full duplex radios are capable of opening new possibilities in contexts of high traffic demand where there are limited radio resources. A critical issue, however, to implementing full duplex radios, in real wireless environments, is being able to cancel self-interference. To overcome the self-interference ch…
▽ More
In this article, we present a real-time full duplex radio system for 5G wireless networks. Full duplex radios are capable of opening new possibilities in contexts of high traffic demand where there are limited radio resources. A critical issue, however, to implementing full duplex radios, in real wireless environments, is being able to cancel self-interference. To overcome the self-interference challenge, we prototype our design on a software-defined radio (SDR) platform. This design combines a dual-polarization antenna-based analog part with a digital self-interference canceller that operates in real-time. Prototype test results confirm that the proposed full-duplex system achieves about 1.9 times higher throughput than a half-duplex system. This article concludes with a discussion of implementationchallenges that remain for researchers seeking the most viable solution for full duplex communications.
△ Less
Submitted 18 December, 2016; v1 submitted 10 March, 2015;
originally announced March 2015.
-
The Feasibility of Interference Alignment for Reverse TDD Systems in MIMO Cellular Networks
Authors:
Kiyeon Kim,
Sang-Woon Jeon,
Janghoon Yang,
Dong Ku Kim
Abstract:
The feasibility conditions of interference alignment (IA) are analyzed for reverse TDD systems, i.e., one cell operates as downlink (DL) but the other cell operates as uplink (UL). Under general multiple-input and multiple-output (MIMO) antenna configurations, a necessary condition and a sufficient condition for one-shot linear IA are established, i.e., linear IA without symbol or time extension.…
▽ More
The feasibility conditions of interference alignment (IA) are analyzed for reverse TDD systems, i.e., one cell operates as downlink (DL) but the other cell operates as uplink (UL). Under general multiple-input and multiple-output (MIMO) antenna configurations, a necessary condition and a sufficient condition for one-shot linear IA are established, i.e., linear IA without symbol or time extension. In several example networks, optimal sum degrees of freedom (DoF) is characterized by the derived necessary condition and sufficient condition. For symmetric DoF within each cell, a sufficient condition is established in a more compact expression, which yields the necessary and sufficient condition for a class of symmetric DoF. An iterative construction of transmit and received beamforming vectors is further proposed, which provides a specific beamforming design satisfying one-shot IA. Simulation results demonstrate that the proposed IA not only achieve lager DoF but also significantly improve the sum rate in the practical signal-to-noise ratio (SNR) regime.
△ Less
Submitted 5 July, 2016; v1 submitted 16 October, 2014;
originally announced October 2014.
-
Linear Degrees of Freedom of MIMO Broadcast Channels with Reconfigurable Antennas in the Absence of CSIT
Authors:
Minho Yang,
Sang-Woon Jeon,
Dong Ku Kim
Abstract:
The K-user multiple-input and multiple-output (MIMO) broadcast channel (BC) with no channel state information at the transmitter (CSIT) is considered, where each receiver is assumed to be equipped with reconfigurable antennas capable of choosing a subset of receiving modes from several preset modes. Under general antenna configurations, the sum linear degrees of freedom (LDoF) of the K-user MIMO B…
▽ More
The K-user multiple-input and multiple-output (MIMO) broadcast channel (BC) with no channel state information at the transmitter (CSIT) is considered, where each receiver is assumed to be equipped with reconfigurable antennas capable of choosing a subset of receiving modes from several preset modes. Under general antenna configurations, the sum linear degrees of freedom (LDoF) of the K-user MIMO BC with reconfigurable antennas is completely characterized, which corresponds to the maximum sum DoF achievable by linear coding strategies. The LDoF region is further characterized for a class of antenna configurations. Similar analysis is extended to the K-user MIMO interference channels with reconfigurable antennas and the sum LDoF is characterized for a class of antenna configurations.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
An Approximation of the Outage Probability for Multi-hop AF Fixed Gain Relay
Authors:
Jun Kyoung Lee,
Janghoon Yang,
Dong Ku Kim
Abstract:
In this letter, we present a closed-form approximation of the outage probability for the multi-hop amplify-and-forward (AF) relaying systems with fixed gain in Rayleigh fading channel. The approximation is derived from the outage event for each hop. The simulation results show the tightness of the proposed approximation in low and high signal-to-noise ratio (SNR) region.
In this letter, we present a closed-form approximation of the outage probability for the multi-hop amplify-and-forward (AF) relaying systems with fixed gain in Rayleigh fading channel. The approximation is derived from the outage event for each hop. The simulation results show the tightness of the proposed approximation in low and high signal-to-noise ratio (SNR) region.
△ Less
Submitted 4 December, 2008;
originally announced December 2008.
