-
Performance Optimization of High-Conflict Transactions within the Hyperledger Fabric Blockchain
Authors:
Alexandros Stoltidis,
Kostas Choumas,
Thanasis Korakis
Abstract:
Hyperledger Fabric (HLF) is a secure and robust blockchain (BC) platform that supports high-throughput and low-latency transactions. However, it encounters challenges in managing conflicting transactions that negatively affect throughput and latency. This paper proposes a novel solution to address these challenges and improve performance, especially in applications incorporating extensive volumes…
▽ More
Hyperledger Fabric (HLF) is a secure and robust blockchain (BC) platform that supports high-throughput and low-latency transactions. However, it encounters challenges in managing conflicting transactions that negatively affect throughput and latency. This paper proposes a novel solution to address these challenges and improve performance, especially in applications incorporating extensive volumes of highly conflicting transactions. Our solution involves reallocating the Multi-Version Concurrency Control (MVCC) of the validation phase to a preceding stage in the transaction flow to enable early detection of conflicting transactions. Specifically, we propose and evaluate two innovative modifications, called Orderer Early MVCC (OEMVCC) and OEMVCC with Execution Avoidance (OEMVCC-EA). Our experimental evaluation results demonstrate significant throughput and latency improvements, providing a practical solution for high-conflict applications that demand high performance and scalability.
△ Less
Submitted 30 July, 2024; v1 submitted 29 July, 2024;
originally announced July 2024.
-
eWake: A Novel Architecture for Semi-Active Wake-Up Radios Attaining Ultra-High Sensitivity at Extremely-Low Consumption
Authors:
Giannis Kazdaridis,
Nikos Sidiropoulos,
Ioannis Zografopoulos,
Thanasis Korakis
Abstract:
In this work we propose a new scheme for semi-passive Wake-Up Receiver circuits that exhibits remarkable sensitivity beyond -70 dBm, while state-of-the-art receivers illustrate sensitivity of up to -55 dBm. The receiver employs the typical principle of an envelope detector that harvests RF energy from its antenna, while it employs a nano-power operation amplifier to intensify the obtained signal p…
▽ More
In this work we propose a new scheme for semi-passive Wake-Up Receiver circuits that exhibits remarkable sensitivity beyond -70 dBm, while state-of-the-art receivers illustrate sensitivity of up to -55 dBm. The receiver employs the typical principle of an envelope detector that harvests RF energy from its antenna, while it employs a nano-power operation amplifier to intensify the obtained signal prior to the final decoding that is realized with the aid of a comparator circuit. It operates at the 868 MHz ISM band using OOK signals propagated through LoRa transceivers, while also supporting addressing capabilities in order to awake only the specified network's nodes. The power expenditure of the developed receiver is as low as 580 nA, remaining at the same power consumption levels as the state-of-the-art implementations.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Directional Initial Access for Millimeter Wave Cellular Systems
Authors:
C. Nicolas Barati,
S. Amir Hosseini,
Marco Mezzavilla,
Sundeep Rangan,
Thanasis Korakis,
Shivendra S. Panwar,
Michele Zorzi
Abstract:
The millimeter wave (mmWave) bands have recently attracted considerable interest for next-generation cellular systems due to the massive available bandwidths at these frequencies. However, a key challenge in designing mmWave cellular systems is initial access -- the procedure by which a mobile establishes an initial link-layer connection to a base station cell. MmWave communication relies on highl…
▽ More
The millimeter wave (mmWave) bands have recently attracted considerable interest for next-generation cellular systems due to the massive available bandwidths at these frequencies. However, a key challenge in designing mmWave cellular systems is initial access -- the procedure by which a mobile establishes an initial link-layer connection to a base station cell. MmWave communication relies on highly directional transmissions and the initial access procedure must thus provide a mechanism by which initial transmission directions can be searched in a potentially large angular space. Design options are compared considering different scanning and signaling procedures to evaluate access delay and system overhead. The channel structure and multiple access issues are also considered. The analysis demonstrates significant benefits of low-resolution fully digital architectures in comparison to single stream analog beamforming.
△ Less
Submitted 28 July, 2016; v1 submitted 19 November, 2015;
originally announced November 2015.
-
Directional Cell Discovery in Millimeter Wave Cellular Networks
Authors:
C. Nicolas Barati,
S. Amir Hosseini,
Sundeep Rangan,
Pei Liu,
Thanasis Korakis,
Shivendra S. Panwar,
Theodore S. Rappaport
Abstract:
The acute disparity between increasing bandwidth demand and available spectrum, has brought millimeter wave (mmW) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for high isotropic path loss. This reliance on directional beamforming, however, complic…
▽ More
The acute disparity between increasing bandwidth demand and available spectrum, has brought millimeter wave (mmW) bands to the forefront of candidate solutions for the next-generation cellular networks. Highly directional transmissions are essential for cellular communication in these frequencies to compensate for high isotropic path loss. This reliance on directional beamforming, however, complicates initial cell search since the mobile and base station must jointly search over a potentially large angular directional space to locate a suitable path to initiate communication. To address this problem, this paper proposes a directional cell discovery procedure where base stations periodically transmit synchronization signals, potentially in time-varying random directions, to scan the angular space. Detectors for these signals are derived based on a Generalized Likelihood Ratio Test (GLRT) under various signal and receiver assumptions. The detectors are then simulated under realistic design parameters and channels based on actual experimental measurements at 28~GHz in New York City. The study reveals two key findings: (i) digital beamforming can significantly outperform analog beamforming even when the digital beamforming uses very low quantization to compensate for the additional power requirements; and (ii) omni-directional transmissions of the synchronization signals from the base station generally outperforms random directional scanning.
△ Less
Submitted 21 April, 2015; v1 submitted 20 April, 2014;
originally announced April 2014.
-
Evolution of IEEE 802.11 compatible standards and impact on Energy Consumption
Authors:
Stratos Keranidis,
Giannis Kazdaridis,
Nikos Makris,
Thanasis Korakis,
Iordanis Koutsopoulos,
Leandros Tassiulas
Abstract:
Over the last decade, the IEEE 802.11 has emerged as the most popular protocol in the wireless domain. Since the release of the first standard version, several amendments have been introduced in an effort to improve its throughput performance, with the most recent one being the IEEE 802.11n extension. In this work, we present detailed experimentally obtained measurements that evaluate the energy e…
▽ More
Over the last decade, the IEEE 802.11 has emerged as the most popular protocol in the wireless domain. Since the release of the first standard version, several amendments have been introduced in an effort to improve its throughput performance, with the most recent one being the IEEE 802.11n extension. In this work, we present detailed experimentally obtained measurements that evaluate the energy efficiency of the base standard in comparison with the latest 802.11n version. Moreover, we investigate the impact of various MAC layer enhancements, both vendor specific and standard compliant ones, on the energy consumption of wireless transceivers and total nodes as well. Results obtained under a wide range of settings, indicate that the latest standard enables reduction of energy expenditure, by more than 75%, when combined with innovative frame aggregation mechanisms.
△ Less
Submitted 8 August, 2013;
originally announced August 2013.
-
STiCMAC: A MAC Protocol for Robust Space-Time Coding in Cooperative Wireless LANs
Authors:
Pei Liu,
Chun Nie,
Thanasis Korakis,
Elza Erkip,
Shivendra Panwar,
Francesco Verde,
Anna Scaglione
Abstract:
Relay-assisted cooperative wireless communication has been shown to have significant performance gains over the legacy direct transmission scheme. Compared with single relay based cooperation schemes, utilizing multiple relays further improves the reliability and rate of transmissions. Distributed space-time coding (DSTC), as one of the schemes to utilize multiple relays, requires tight coordinati…
▽ More
Relay-assisted cooperative wireless communication has been shown to have significant performance gains over the legacy direct transmission scheme. Compared with single relay based cooperation schemes, utilizing multiple relays further improves the reliability and rate of transmissions. Distributed space-time coding (DSTC), as one of the schemes to utilize multiple relays, requires tight coordination between relays and does not perform well in a distributed environment with mobility. In this paper, a cooperative medium access control (MAC) layer protocol, called \emph{STiCMAC}, is designed to allow multiple relays to transmit at the same time in an IEEE 802.11 network. The transmission is based on a novel DSTC scheme called \emph{randomized distributed space-time coding} (\emph{R-DSTC}), which requires minimum coordination. Unlike conventional cooperation schemes that pick nodes with good links, \emph{STiCMAC} picks a \emph{transmission mode} that could most improve the end-to-end data rate. Any station that correctly receives from the source can act as a relay and participate in forwarding. The MAC protocol is implemented in a fully decentralized manner and is able to opportunistically recruit relays on the fly, thus making it \emph{robust} to channel variations and user mobility. Simulation results show that the network capacity and delay performance are greatly improved, especially in a mobile environment.
△ Less
Submitted 21 September, 2011; v1 submitted 19 May, 2011;
originally announced May 2011.