Showing 1–34 of 34 results for author: Mezzavilla, M

Channel Modeling for FR3 Upper Mid-band via Generative Adversarial Networks

Authors: Yaqi Hu, Mingsheng Yin, Marco Mezzavilla, Hao Guo, Sundeep Rangan

Abstract: The upper mid-band (FR3) has been recently attracting interest for new generation of mobile networks, as it provides a promising balance between spectrum availability and coverage, which are inherent limitations of the sub 6GHz and millimeter wave bands, respectively. In order to efficiently design and optimize the network, channel modeling plays a key role since FR3 systems are expected to operat… ▽ More The upper mid-band (FR3) has been recently attracting interest for new generation of mobile networks, as it provides a promising balance between spectrum availability and coverage, which are inherent limitations of the sub 6GHz and millimeter wave bands, respectively. In order to efficiently design and optimize the network, channel modeling plays a key role since FR3 systems are expected to operate at multiple frequency bands. Data-driven methods, especially generative adversarial networks (GANs), can capture the intricate relationships among data samples, and provide an appropriate tool for FR3 channel modeling. In this work, we present the architecture, link state model, and path generative network of GAN-based FR3 channel modeling. The comparison of our model greatly matches the ray-tracing simulated data. △ Less

Submitted 25 April, 2024; originally announced April 2024.

Cellular Wireless Networks in the Upper Mid-Band

Authors: Seongjoon Kang, Marco Mezzavilla, Sundeep Rangan, Arjuna Madanayake, Satheesh Bojja Venkatakrishnan, Gregory Hellbourg, Monisha Ghosh, Hamed Rahmani, Aditya Dhananjay

Abstract: The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. The upper mid-band can thus provide a powerful and complementary frequency range to balanc… ▽ More The upper mid-band - roughly from 7 to 24 GHz - has attracted considerable recent interest for new cellular services. This frequency range has vastly more spectrum than the highly congested bands below 7 GHz while offering more favorable propagation and coverage than the millimeter wave (mmWave) frequencies. The upper mid-band can thus provide a powerful and complementary frequency range to balance coverage and capacity. Realizing the full potential of these bands, however, will require fundamental changes to the design of cellular systems. Most importantly, spectrum will likely need to be shared with incumbents including communication satellites, military RADAR, and radio astronomy. Also, the upper mid-band is simply a vast frequency range. Due to this wide bandwidth, combined with the directional nature of transmission and intermittent occupancy of incumbents, cellular systems will need to be agile to sense and intelligently use large spatial and frequency degrees of freedom. This paper attempts to provide an initial assessment of the feasibility and potential gains of wideband cellular systems operating in the upper mid-band. The study includes: (1) a system study to assess potential gains of multi-band systems in a representative dense urban environment and illustrate the value of wide band system with dynamic frequency selectivity; (2) an evaluation of potential cross interference between satellites and terrestrial cellular services and interference nulling to reduce that interference; and (3) design and evaluation of a compact multi-band antenna array structure. Leveraging these preliminary results, we identify potential future research directions to realize next-generation systems in these frequencies. △ Less

Submitted 6 March, 2024; v1 submitted 6 September, 2023; originally announced September 2023.

Comments: 18 pages

Wireless Channel Prediction in Partially Observed Environments

Authors: Mingsheng Yin, Yaqi Hu, Tommy Azzino, Seongjoon Kang, Marco Mezzavilla, Sundeep Rangan

Abstract: Site-specific radio frequency (RF) propagation prediction increasingly relies on models built from visual data such as cameras and LIDAR sensors. When operating in dynamic settings, the environment may only be partially observed. This paper introduces a method to extract statistical channel models, given partial observations of the surrounding environment. We propose a simple heuristic algorithm t… ▽ More Site-specific radio frequency (RF) propagation prediction increasingly relies on models built from visual data such as cameras and LIDAR sensors. When operating in dynamic settings, the environment may only be partially observed. This paper introduces a method to extract statistical channel models, given partial observations of the surrounding environment. We propose a simple heuristic algorithm that performs ray tracing on the partial environment and then uses machine-learning trained predictors to estimate the channel and its uncertainty from features extracted from the partial ray tracing results. It is shown that the proposed method can interpolate between fully statistical models when no partial information is available and fully deterministic models when the environment is completely observed. The method can also capture the degree of uncertainty of the propagation predictions depending on the amount of region that has been explored. The methodology is demonstrated in a robotic navigation application simulated on a set of indoor maps with detailed models constructed using state-of-the-art navigation, simultaneous localization and mapping (SLAM), and computer vision methods. △ Less

Submitted 2 July, 2022; originally announced July 2022.

Network-Aware 5G Edge Computing for Object Detection: Augmenting Wearables to "See" More, Farther and Faster

Authors: Zhongzheng Yuan, Tommy Azzino, Yu Hao, Yixuan Lyu, Haoyang Pei, Alain Boldini, Marco Mezzavilla, Mahya Beheshti, Maurizio Porfiri, Todd Hudson, William Seiple, Yi Fang, Sundeep Rangan, Yao Wang, J. R. Rizzo

Abstract: Advanced wearable devices are increasingly incorporating high-resolution multi-camera systems. As state-of-the-art neural networks for processing the resulting image data are computationally demanding, there has been growing interest in leveraging fifth generation (5G) wireless connectivity and mobile edge computing for offloading this processing to the cloud. To assess this possibility, this pape… ▽ More Advanced wearable devices are increasingly incorporating high-resolution multi-camera systems. As state-of-the-art neural networks for processing the resulting image data are computationally demanding, there has been growing interest in leveraging fifth generation (5G) wireless connectivity and mobile edge computing for offloading this processing to the cloud. To assess this possibility, this paper presents a detailed simulation and evaluation of 5G wireless offloading for object detection within a powerful, new smart wearable called VIS4ION, for the Blind-and-Visually Impaired (BVI). The current VIS4ION system is an instrumented book-bag with high-resolution cameras, vision processing and haptic and audio feedback. The paper considers uploading the camera data to a mobile edge cloud to perform real-time object detection and transmitting the detection results back to the wearable. To determine the video requirements, the paper evaluates the impact of video bit rate and resolution on object detection accuracy and range. A new street scene dataset with labeled objects relevant to BVI navigation is leveraged for analysis. The vision evaluation is combined with a detailed full-stack wireless network simulation to determine the distribution of throughputs and delays with real navigation paths and ray-tracing from new high-resolution 3D models in an urban environment. For comparison, the wireless simulation considers both a standard 4G-Long Term Evolution (LTE) carrier and high-rate 5G millimeter-wave (mmWave) carrier. The work thus provides a thorough and realistic assessment of edge computing with mmWave connectivity in an application with both high bandwidth and low latency requirements. △ Less

Submitted 15 April, 2022; v1 submitted 25 December, 2021; originally announced December 2021.

Comments: Published in: IEEE Access ( Volume: 10)

What Will the Future of UAV Cellular Communications Be? A Flight from 5G to 6G

Authors: Giovanni Geraci, Adrian Garcia-Rodriguez, M. Mahdi Azari, Angel Lozano, Marco Mezzavilla, Symeon Chatzinotas, Yun Chen, Sundeep Rangan, Marco Di Renzo

Abstract: What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailin… ▽ More What will the future of UAV cellular communications be? In this tutorial article, we address such a compelling yet difficult question by embarking on a journey from 5G to 6G and sharing a large number of realistic case studies supported by original results. We start by overviewing the status quo on UAV communications from an industrial standpoint, providing fresh updates from the 3GPP and detailing new 5G NR features in support of aerial devices. We then show the potential and the limitations of such features. In particular, we demonstrate how sub-6 GHz massive MIMO can successfully tackle cell selection and interference challenges, we showcase encouraging mmWave coverage evaluations in both urban and suburban/rural settings, and we examine the peculiarities of direct device-to-device communications in the sky. Moving on, we sneak a peek at next-generation UAV communications, listing some of the use cases envisioned for the 2030s. We identify the most promising 6G enablers for UAV communication, those expected to take the performance and reliability to the next level. For each of these disruptive new paradigms (non-terrestrial networks, cell-free architectures, artificial intelligence, reconfigurable intelligent surfaces, and THz communications), we gauge the prospective benefits for UAVs and discuss the main technological hurdles that stand in the way. All along, we distil our numerous findings into essential takeaways, and we identify key open problems worthy of further study. △ Less

Submitted 11 May, 2021; originally announced May 2021.

Millimeter Wave Channel Modeling via Generative Neural Networks

Authors: William Xia, Sundeep Rangan, Marco Mezzavilla, Angel Lozano, Giovanni Geraci, Vasilii Semkin, Giuseppe Loianno

Abstract: Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative mod… ▽ More Statistical channel models are instrumental to design and evaluate wireless communication systems. In the millimeter wave bands, such models become acutely challenging; they must capture the delay, directions, and path gains, for each link and with high resolution. This paper presents a general modeling methodology based on training generative neural networks from data. The proposed generative model consists of a two-stage structure that first predicts the state of each link (line-of-sight, non-line-of-sight, or outage), and subsequently feeds this state into a conditional variational autoencoder that generates the path losses, delays, and angles of arrival and departure for all its propagation paths. Importantly, minimal prior assumptions are made, enabling the model to capture complex relationships within the data. The methodology is demonstrated for 28GHz air-to-ground channels in an urban environment, with training datasets produced by means of ray tracing. △ Less

Submitted 25 August, 2020; originally announced August 2020.

Comments: Submitted to IEEE GLOBECOM 2020 Workshop on Wireless Propagation Channels for 5G and B5G

Enabling Remote Whole-Body Control with 5G Edge Computing

Authors: Huaijiang Zhu, Manali Sharma, Kai Pfeiffer, Marco Mezzavilla, Jia Shen, Sundeep Rangan, Ludovic Righetti

Abstract: Real-world applications require light-weight, energy-efficient, fully autonomous robots. Yet, increasing autonomy is oftentimes synonymous with escalating computational requirements. It might thus be desirable to offload intensive computation--not only sensing and planning, but also low-level whole-body control--to remote servers in order to reduce on-board computational needs. Fifth Generation (5… ▽ More Real-world applications require light-weight, energy-efficient, fully autonomous robots. Yet, increasing autonomy is oftentimes synonymous with escalating computational requirements. It might thus be desirable to offload intensive computation--not only sensing and planning, but also low-level whole-body control--to remote servers in order to reduce on-board computational needs. Fifth Generation (5G) wireless cellular technology, with its low latency and high bandwidth capabilities, has the potential to unlock cloud-based high performance control of complex robots. However, state-of-the-art control algorithms for legged robots can only tolerate very low control delays, which even ultra-low latency 5G edge computing can sometimes fail to achieve. In this work, we investigate the problem of cloud-based whole-body control of legged robots over a 5G link. We propose a novel approach that consists of a standard optimization-based controller on the network edge and a local linear, approximately optimal controller that significantly reduces on-board computational needs while increasing robustness to delay and possible loss of communication. Simulation experiments on humanoid balancing and walking tasks that includes a realistic 5G communication model demonstrate significant improvement of the reliability of robot locomotion under jitter and delays likely to experienced in 5G wireless links. △ Less

Submitted 18 August, 2020; originally announced August 2020.

Towards 6G Networks: Use Cases and Technologies

Authors: Marco Giordani, Michele Polese, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) off… ▽ More Reliable data connectivity is vital for the ever increasingly intelligent, automated and ubiquitous digital world. Mobile networks are the data highways and, in a fully connected, intelligent digital world, will need to connect everything, from people to vehicles, sensors, data, cloud resources and even robotic agents. Fifth generation (5G) wireless networks (that are being currently deployed) offer significant advances beyond LTE, but may be unable to meet the full connectivity demands of the future digital society. Therefore, this article discusses technologies that will evolve wireless networks towards a sixth generation (6G), and that we consider as enablers for several potential 6G use cases. We provide a full-stack, system-level perspective on 6G scenarios and requirements, and select 6G technologies that can satisfy them either by improving the 5G design, or by introducing completely new communication paradigms. △ Less

Submitted 4 February, 2020; v1 submitted 28 March, 2019; originally announced March 2019.

Comments: The paper has been accepted for publication at the IEEE Communications Magazine, 2020

Understanding End-to-End Effects of Channel Dynamics in Millimeter Wave 5G New Radio

Authors: Christopher Slezak, Menglei Zhang, Marco Mezzavilla, Sundeep Rangan

Abstract: A critical challenge for wireless communications in the millimeter wave (mmWave) bands is blockage. MmWave signals suffer significant penetration losses from many common materials and objects, and small changes in the position of obstacles in the environment can cause large variations in the channel quality. This paper provides a measurement-based study of the effects of human blockage on an end-t… ▽ More A critical challenge for wireless communications in the millimeter wave (mmWave) bands is blockage. MmWave signals suffer significant penetration losses from many common materials and objects, and small changes in the position of obstacles in the environment can cause large variations in the channel quality. This paper provides a measurement-based study of the effects of human blockage on an end-to-end application over a mmWave cellular link. A phased array system is used to measure the channel in multiple directions almost simultaneously in a realistic indoor scenario. The measurements are integrated into a detailed ns-3 simulation that models both the latest 3GPP New Radio beam search procedure as well as the internet protocol stack. The measurement-based simulation illustrates how recovery from blockage depends on the path diversity and beam search. △ Less

Submitted 25 June, 2018; originally announced June 2018.

Will TCP work in mmWave 5G Cellular Networks?

Authors: Menglei Zhang, Michele Polese, Marco Mezzavilla, Jing Zhu, Sundeep Rangan, Shivendra Panwar, Michele Zorzi

Abstract: The vast available spectrum in the millimeter wave (mmWave) bands offers the possibility of multi-Gbps data rates for fifth generation (5G) cellular networks. However, mmWave capacity can be highly intermittent due to the vulnerability of mmWave signals to blockages and delays in directional searching. Such highly variable links present unique challenges for adaptive control mechanisms in transpor… ▽ More The vast available spectrum in the millimeter wave (mmWave) bands offers the possibility of multi-Gbps data rates for fifth generation (5G) cellular networks. However, mmWave capacity can be highly intermittent due to the vulnerability of mmWave signals to blockages and delays in directional searching. Such highly variable links present unique challenges for adaptive control mechanisms in transport layer protocols and end-to-end applications. This paper considers the fundamental question of whether TCP - the most widely used transport protocol - will work in mmWave cellular systems. The paper provides a comprehensive simulation study of TCP considering various factors such as the congestion control algorithm, including the recently proposed TCP BBR, edge vs. remote servers, handover and multi- connectivity, TCP packet size and 3GPP-stack parameters. We show that the performance of TCP on mmWave links is highly dependent on different combinations of these parameters, and identify the open challenges in this area. △ Less

Submitted 6 October, 2018; v1 submitted 14 June, 2018; originally announced June 2018.

Comments: 7 pages, 4 figures, 2 tables. To be published in the IEEE Communication Magazine

milliProxy: a TCP Proxy Architecture for 5G mmWave Cellular Systems

Authors: Michele Polese, Marco Mezzavilla, Menglei Zhang, Jing Zhu, Sundeep Rangan, Shivendra Panwar, Michele Zorzi

Abstract: TCP is the most widely used transport protocol in the internet. However, it offers suboptimal performance when operating over high bandwidth mmWave links. The main issues introduced by communications at such high frequencies are (i) the sensitivity to blockage and (ii) the high bandwidth fluctuations due to Line of Sight (LOS) to Non Line of Sight (NLOS) transitions and vice versa. In particular,… ▽ More TCP is the most widely used transport protocol in the internet. However, it offers suboptimal performance when operating over high bandwidth mmWave links. The main issues introduced by communications at such high frequencies are (i) the sensitivity to blockage and (ii) the high bandwidth fluctuations due to Line of Sight (LOS) to Non Line of Sight (NLOS) transitions and vice versa. In particular, TCP has an abstract view of the end-to-end connection, which does not properly capture the dynamics of the wireless mmWave link. The consequence is a suboptimal utilization of the available resources. In this paper we propose a TCP proxy architecture that improves the performance of TCP flows without any modification at the remote sender side. The proxy is installed in the Radio Access Network, and exploits information available at the gNB in order to maximize throughput and minimize latency. △ Less

Submitted 7 December, 2017; originally announced December 2017.

Comments: 7 pages, 6 figures, 2 tables, presented at the 2017 51st Asilomar Conference on Signals, Systems and Computers, Pacific Grove, CA, 2017

End-to-End Simulation of 5G mmWave Networks

Authors: Marco Mezzavilla, Menglei Zhang, Michele Polese, Russell Ford, Sourjya Dutta, Sundeep Rangan, Michele Zorzi

Abstract: Due to its potential for multi-gigabit and low latency wireless links, millimeter wave (mmWave) technology is expected to play a central role in 5th generation cellular systems. While there has been considerable progress in understanding the mmWave physical layer, innovations will be required at all layers of the protocol stack, in both the access and the core network. Discrete-event network simul… ▽ More Due to its potential for multi-gigabit and low latency wireless links, millimeter wave (mmWave) technology is expected to play a central role in 5th generation cellular systems. While there has been considerable progress in understanding the mmWave physical layer, innovations will be required at all layers of the protocol stack, in both the access and the core network. Discrete-event network simulation is essential for end-to-end, cross-layer research and development. This paper provides a tutorial on a recently developed full-stack mmWave module integrated into the widely used open-source ns--3 simulator. The module includes a number of detailed statistical channel models as well as the ability to incorporate real measurements or ray-tracing data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and highly customizable, making it easy to integrate algorithms or compare Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example. The module is interfaced with the core network of the ns--3 Long Term Evolution (LTE) module for full-stack simulations of end-to-end connectivity, and advanced architectural features, such as dual-connectivity, are also available. To facilitate the understanding of the module, and verify its correct functioning, we provide several examples that show the performance of the custom mmWave stack as well as custom congestion control algorithms designed specifically for efficient utilization of the mmWave channel. △ Less

Submitted 5 February, 2018; v1 submitted 8 May, 2017; originally announced May 2017.

Comments: 25 pages, 16 figures, submitted to IEEE Communications Surveys and Tutorials (revised Jan. 2018)

ns-3 Implementation of the 3GPP MIMO Channel Model for Frequency Spectrum above 6 GHz

Authors: Menglei Zhang, Michele Polese, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: Communications at mmWave frequencies will be a key enabler of the next generation of cellular networks, due to the multi-Gbps rate that can be achieved. However, there are still several problems that must be solved before this technology can be widely adopted, primarily associated with the interplay between the variability of mmWave links and the complexity of mobile networks. An end-to-end networ… ▽ More Communications at mmWave frequencies will be a key enabler of the next generation of cellular networks, due to the multi-Gbps rate that can be achieved. However, there are still several problems that must be solved before this technology can be widely adopted, primarily associated with the interplay between the variability of mmWave links and the complexity of mobile networks. An end-to-end network simulator represents a great tool to assess the performance of any proposed solution to meet the stringent 5G requirements. Given the criticality of channel propagation characteristics at higher frequencies, we present our implementation of the 3GPP channel model for the 6-100 GHz band for the ns-3 end-to-end 5G mmWave module, and detail its associated MIMO beamforming architecture. △ Less

Submitted 15 February, 2017; originally announced February 2017.

Improved Handover Through Dual Connectivity in 5G mmWave Mobile Networks

Authors: Michele Polese, Marco Giordani, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: The millimeter wave (mmWave) bands offer the possibility of orders of magnitude greater throughput for fifth generation (5G) cellular systems. However, since mmWave signals are highly susceptible to blockage, channel quality on any one mmWave link can be extremely intermittent. This paper implements a novel dual connectivity protocol that enables mobile user equipment (UE) devices to maintain phys… ▽ More The millimeter wave (mmWave) bands offer the possibility of orders of magnitude greater throughput for fifth generation (5G) cellular systems. However, since mmWave signals are highly susceptible to blockage, channel quality on any one mmWave link can be extremely intermittent. This paper implements a novel dual connectivity protocol that enables mobile user equipment (UE) devices to maintain physical layer connections to 4G and 5G cells simultaneously. A novel uplink control signaling system combined with a local coordinator enables rapid path switching in the event of failures on any one link. This paper provides the first comprehensive end-to-end evaluation of handover mechanisms in mmWave cellular systems. The simulation framework includes detailed measurement-based channel models to realistically capture spatial dynamics of blocking events, as well as the full details of MAC, RLC and transport protocols. Compared to conventional handover mechanisms, the study reveals significant benefits of the proposed method under several metrics. △ Less

Submitted 17 July, 2017; v1 submitted 15 November, 2016; originally announced November 2016.

Comments: 16 pages, 13 figures, to appear on the 2017 IEEE JSAC Special Issue on Millimeter Wave Communications for Future Mobile Networks

The Bufferbloat Problem over Intermittent Multi-Gbps mmWave Links

Authors: Menglei Zhang, Marco Mezzavilla, Jing Zhu, Sundeep Rangan, Shivendra Panwar

Abstract: Due to massive available spectrum in the millimeter wave (mmWave) bands, cellular systems in these frequencies may provides orders of magnitude greater capacity than networks in conventional lower frequency bands. However, due to high susceptibility to blocking, mmWave links can be extremely intermittent in quality. This combination of high peak throughputs and intermittency can cause significant… ▽ More Due to massive available spectrum in the millimeter wave (mmWave) bands, cellular systems in these frequencies may provides orders of magnitude greater capacity than networks in conventional lower frequency bands. However, due to high susceptibility to blocking, mmWave links can be extremely intermittent in quality. This combination of high peak throughputs and intermittency can cause significant challenges in end-to-end transport-layer mechanisms such as TCP. This paper studies the particularly challenging problem of bufferbloat. Specifically, with current buffering and congestion control mechanisms, high throughput-high variable links can lead to excessive buffers incurring long latency. In this paper, we capture the performance trends obtained while adopting two potential solutions that have been proposed in the literature: Active queue management (AQM) and dynamic receive window. We show that, over mmWave links, AQM mitigates the latency but cannot deliver high throughput. The main reason relies on the fact that the current congestion control was not designed to cope with high data rates with sudden change. Conversely, the dynamic receive window approach is more responsive and therefore supports higher channel utilization while mitigating the delay, thus representing a viable solution. △ Less

Submitted 7 November, 2016; originally announced November 2016.

An Efficient Uplink Multi-Connectivity Scheme for 5G mmWave Control Plane Applications

Authors: Marco Giordani, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular systems. However, links in mmWave networks are susceptible to blockage and may suffer from rapid variations in quality. Connectivity to multiple cells - at mmWave and/or traditional frequencies - is considered essential for robust communication. One of the challeng… ▽ More The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular systems. However, links in mmWave networks are susceptible to blockage and may suffer from rapid variations in quality. Connectivity to multiple cells - at mmWave and/or traditional frequencies - is considered essential for robust communication. One of the challenges in supporting multi-connectivity in mmWaves is the requirement for the network to track the direction of each link in addition to its power and timing. To address this challenge, we implement a novel uplink measurement system that, with the joint help of a local coordinator operating in the legacy band, guarantees continuous monitoring of the channel propagation conditions and allows for the design of efficient control plane applications, including handover, beam tracking and initial access. We show that an uplink-based multi-connectivity approach enables less consuming, better performing, faster and more stable cell selection and scheduling decisions with respect to a traditional downlink-based standalone scheme. Moreover, we argue that the presented framework guarantees (i) efficient tracking of the user in the presence of the channel dynamics expected at mmWaves, and (ii) fast reaction to situations in which the primary propagation path is blocked or not available. △ Less

Submitted 21 July, 2017; v1 submitted 16 October, 2016; originally announced October 2016.

Comments: Submitted for publication in IEEE Transactions on Wireless Communications (TWC)

Hybrid Spectrum Sharing in mmWave Cellular Networks

Authors: Mattia Rebato, Federico Boccardi, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging m… ▽ More While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging mmWave technologies. In this paper, we introduce a new hybrid spectrum access scheme for mmWave networks, where data is aggregated through two mmWave carriers with different characteristics. In particular, we consider the case of a hybrid spectrum scheme between a mmWave band with exclusive access and a mmWave band where spectrum is pooled between multiple operators. To the best of our knowledge, this is the first study proposing hybrid spectrum access for mmWave networks and providing a quantitative assessment of its benefits. Our results show that this approach provides major advantages with respect to traditional fully licensed or fully unlicensed spectrum access schemes, though further work is needed to achieve a more complete understanding of both technical and non technical implications. △ Less

Submitted 27 July, 2017; v1 submitted 5 October, 2016; originally announced October 2016.

Journal ref: IEEE Transactions on Cognitive Communications and Networking, vol. 3, no. 2, pp. 155-168 (June 2017)

Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration

Authors: Michele Polese, Marco Mezzavilla, Michele Zorzi

Abstract: Communications at frequencies above 10 GHz (the mmWave band) are expected to play a major role for the next generation of cellular networks (5G), because of the potential multi-gigabit, ultra-low latency performance of this technology. mmWave frequencies however suffer from very high isotropic pathloss, which may result in cells with a much smaller coverage area than current LTE macrocells. High d… ▽ More Communications at frequencies above 10 GHz (the mmWave band) are expected to play a major role for the next generation of cellular networks (5G), because of the potential multi-gigabit, ultra-low latency performance of this technology. mmWave frequencies however suffer from very high isotropic pathloss, which may result in cells with a much smaller coverage area than current LTE macrocells. High directionality techniques will be used to improve signal quality and extend coverage area, along with a high density deployment of mmWave base stations (BS). However, when propagation conditions are hard and it is difficult to provide high quality coverage with mmWave BS, it is necessary to rely on previous generation LTE base stations, which make use of lower frequencies (900 MHz - 3.5 GHz), which are less sensitive to blockage and experience lower pathloss. In order to provide ultra-reliable services to mobile users there is a need for network architectures that tightly and seamlessly integrate the LTE and mmWave Radio Access Technologies. In this paper we will present two possible alternatives for this integration and show how simulation tools can be used to assess and compare their performance. △ Less

Submitted 19 July, 2016; originally announced July 2016.

Comments: This paper was accepted for presentation at the ninth EAI SIMUtools 2016 conference, August 22 - 23, 2016, Prague, Czech Republic

Hybrid Spectrum Access for mmWave Networks

Authors: Mattia Rebato, Federico Boccardi, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging m… ▽ More While spectrum at millimeter wave (mmWave) frequencies is less scarce than at traditional frequencies below 6 GHz, still it is not unlimited, in particular if we consider the requirements from other services using the same band and the need to license mmWave bands to multiple mobile operators. Therefore, an efficient spectrum access scheme is critical to harvest the maximum benefit from emerging mmWave technologies. In this paper, motivated by previous results where spectrum pooling was proved to be more feasible at high mmWave frequencies, we study the performance of a hybrid spectrum scheme where exclusive access is used at frequencies in the 20/30 GHz range while spectrum pooling/unlicensed spectrum is used at frequencies around 70 GHz. Our preliminary results show that hybrid spectrum access is a promising approach for mmWave networks, and motivate further studies to achieve a more complete understanding of both technical and non technical implications. △ Less

Submitted 2 May, 2016; originally announced May 2016.

Comments: Accepted at 15th Annual Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET), 2016

Multi-Connectivity in 5G mmWave Cellular Networks

Authors: Marco Giordani, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular wireless systems. However, links in mmWave networks are highly susceptible to blocking and may suffer from rapid variations in quality. Connectivity to multiple cells - both in the mmWave and in the traditional lower frequencies - is thus considered essential for r… ▽ More The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular wireless systems. However, links in mmWave networks are highly susceptible to blocking and may suffer from rapid variations in quality. Connectivity to multiple cells - both in the mmWave and in the traditional lower frequencies - is thus considered essential for robust connectivity. However, one of the challenges in supporting multi-connectivity in the mmWave space is the requirement for the network to track the direction of each link in addition to its power and timing. With highly directional beams and fast varying channels, this directional tracking may be the main bottleneck in realizing robust mmWave networks. To address this challenge, this paper proposes a novel measurement system based on (i) the UE transmitting sounding signals in directions that sweep the angular space, (ii) the mmWave cells measuring the instantaneous received signal strength along with its variance to better capture the dynamics and, consequently, the reliability of a channel/direction and, finally, (iii) a centralized controller making handover and scheduling decisions based on the mmWave cell reports and transmitting the decisions either via a mmWave cell or conventional microwave cell (when control signaling paths are not available). We argue that the proposed scheme enables efficient and highly adaptive cell selection in the presence of the channel variability expected at mmWave frequencies. △ Less

Submitted 30 April, 2016; originally announced May 2016.

Comments: Accepted at 15th Annual Mediterranean Ad Hoc Networking Workshop (MED-HOC-NET), 2016

Comparative Analysis of Initial Access Techniques in 5G mmWave Cellular Networks

Authors: Marco Giordani, Marco Mezzavilla, Nicolas Barati, Sundeep Rangan, Michele Zorzi

Abstract: The millimeter wave frequencies (roughly above 10 GHz) offer the availability of massive bandwidth to greatly increase the capacity of fifth generation (5G) cellular wireless systems. However, to overcome the high isotropic pathloss at these frequencies, highly directional transmissions will be required at both the base station (BS) and the mobile user equipment (UE) to establish sufficient link b… ▽ More The millimeter wave frequencies (roughly above 10 GHz) offer the availability of massive bandwidth to greatly increase the capacity of fifth generation (5G) cellular wireless systems. However, to overcome the high isotropic pathloss at these frequencies, highly directional transmissions will be required at both the base station (BS) and the mobile user equipment (UE) to establish sufficient link budget in wide area networks. This reliance on directionality has important implications for control layer procedures. Initial access in particular can be significantly delayed due to the need for the BS and the UE to find the initial directions of transmission. This paper provides a survey of several recently proposed techniques. Detection probability and delay analysis is performed to compare various techniques including exhaustive and iterative search. We show that the optimal strategy depends on the target SNR regime. △ Less

Submitted 30 April, 2016; originally announced May 2016.

Comments: Accepted at 50th Annual Conference on Information Sciences and Systems (CISS), 2016

Channel Dynamics and SNR Tracking in Millimeter Wave Cellular Systems

Authors: Marco Giordani, Marco Mezzavilla, Aditya Dhananjay, Sundeep Rangan, Michele Zorzi

Abstract: The millimeter wave (mmWave) frequencies are likely to play a significant role in fifth-generation (5G) cellular systems. A key challenge in developing systems in these bands is the potential for rapid channel dynamics: since mmWave signals are blocked by many materials, small changes in the position or orientation of the handset relative to objects in the environment can cause large swings in the… ▽ More The millimeter wave (mmWave) frequencies are likely to play a significant role in fifth-generation (5G) cellular systems. A key challenge in developing systems in these bands is the potential for rapid channel dynamics: since mmWave signals are blocked by many materials, small changes in the position or orientation of the handset relative to objects in the environment can cause large swings in the channel quality. This paper addresses the issue of tracking the signal to noise ratio (SNR), which is an essential procedure for rate prediction, handover and radio link failure detection. A simple method for estimating the SNR from periodic synchronization signals is considered. The method is then evaluated using real experiments in common blockage scenarios combined with outdoor statistical models. △ Less

Submitted 19 April, 2016; originally announced April 2016.

Understanding Noise and Interference Regimes in 5G Millimeter-Wave Cellular Networks

Authors: Mattia Rebato, Marco Mezzavilla, Sundeep Rangan, Federico Boccardi, Michele Zorzi

Abstract: With the severe spectrum shortage in conventional cellular bands, millimeter-wave (mmWave) frequencies have been attracting growing attention for next-generation micro- and picocellular wireless networks. A fundamental and open question is whether mmWave cellular networks are likely to be noise- or interference-limited. Identifying in which regime a network is operating is critical for the design… ▽ More With the severe spectrum shortage in conventional cellular bands, millimeter-wave (mmWave) frequencies have been attracting growing attention for next-generation micro- and picocellular wireless networks. A fundamental and open question is whether mmWave cellular networks are likely to be noise- or interference-limited. Identifying in which regime a network is operating is critical for the design of MAC and physical-layer procedures and to provide insights on how transmissions across cells should be coordinated to cope with interference. This work uses the latest measurement-based statistical channel models to accurately assess the Interference-to-Noise Ratio (INR) in a wide range of deployment scenarios. In addition to cell density, we also study antenna array size and antenna patterns, whose effects are critical in the mmWave regime. The channel models also account for blockage, line-of-sight and non-line-of-sight regimes as well as local scattering, that significantly affect the level of spatial isolation. △ Less

Submitted 19 April, 2016; originally announced April 2016.

Transport Layer Performance in 5G mmWave Cellular

Authors: Menglei Zhang, Marco Mezzavilla, Russell Ford, Sundeep Rangan, Shivendra Panwar, Evangelos Mellios, Di Kong, Andrew Nix, Michele Zorzi

Abstract: The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain… ▽ More The millimeter wave (mmWave) bands are likely to play a significant role in next generation cellular systems due to the possibility of very high throughput thanks to the availability of massive bandwidth and high-dimensional antennas. Especially in Non-Line-of-Sight conditions, significant variations in the received RF power can occur as a result of the scattering from nearby building and terrain surfaces. Scattering objects come and go as the user moves through the local environment. At the higher end of the mmWave band, rough surface scatter generates cluster-based small-scale fading, where signal levels can vary by more than 20 dB over just a few wavelengths. This high level of channel variability may present significant challenges for congestion control. Using our recently developed end-to-end mmWave ns3-based framework, this paper presents the first performance evaluation of TCP congestion control in next-generation mmWave networks. Importantly, the framework can incorporate detailed models of the mmWave channel, beam- forming and tracking algorithms, and builds on statistical channel models derived from real measurements in New York City, as well as detailed ray traces. △ Less

Submitted 8 March, 2016; originally announced March 2016.

Resource Sharing in 5G mmWave Cellular Networks

Authors: Mattia Rebato, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: In this paper, we discuss resource sharing, a key dimension in mmWave network design in which spectrum, access and/or network infrastructure resources can be shared by multiple operators. It is argued that this sharing paradigm will be essential to fully exploit the tremendous amounts of bandwidth and the large number of antenna degrees of freedom available in these bands, and to provide statistic… ▽ More In this paper, we discuss resource sharing, a key dimension in mmWave network design in which spectrum, access and/or network infrastructure resources can be shared by multiple operators. It is argued that this sharing paradigm will be essential to fully exploit the tremendous amounts of bandwidth and the large number of antenna degrees of freedom available in these bands, and to provide statistical multiplexing to accommodate the highly variable nature of the traffic. In this paper, we investigate and compare various sharing configurations in order to capture the enhanced potential of mmWave communications. Our results reflect both the technical and the economical aspects of the various sharing paradigms. We deliver a number of key insights, corroborated by detailed simulations, which include an analysis of the effects of the distinctive propagation characteristics of the mmWave channel, along with a rigorous multi-antenna characterization. Key findings of this study include (i) the strong dependence of the comparative results on channel propagation and antenna characteristics, and therefore the need to accurately model them, and (ii) the desirability of a full spectrum and infrastructure sharing configuration, which may result in increased user rate as well as in economical advantages for both service provider. △ Less

Submitted 8 March, 2016; originally announced March 2016.

The Potential of Resource Sharing in 5G Millimeter-Wave Bands

Authors: Mattia Rebato, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: With the severe spectrum shortage in conventional cellular bands, the millimeter (mmWave) frequencies, roughly above 10~GHz, have been attracting growing attention for next-generation micro- and pico- cellular wireless networks. A fundamental and open question is how these bands should be used by cellular operators. Cellular spectrum has been traditionally allocated following an exclusive ownershi… ▽ More With the severe spectrum shortage in conventional cellular bands, the millimeter (mmWave) frequencies, roughly above 10~GHz, have been attracting growing attention for next-generation micro- and pico- cellular wireless networks. A fundamental and open question is how these bands should be used by cellular operators. Cellular spectrum has been traditionally allocated following an exclusive ownership model. However, in this paper we argue that the distinct nature of mmWave communication -- the massive bandwidth degrees of freedom, directional isolation and high susceptibility to blockage -- suggest that spectrum and infrastructure sharing between multiple operators may be necessary to exploit the full potential of these bands. High-level capacity analyses are presented that reveal significant possible gains under spectrum and infrastructure sharing, even under minimal coordination between operators. Moreover, we discuss how network technologies including software defined networks (SDNs) and network function virtualization (NFV) can easily enable resource sharing by having a programmable core entity provide transparent inter-operator access to the end user. △ Less

Submitted 24 February, 2016; originally announced February 2016.

Initial Access in 5G mm-Wave Cellular Networks

Authors: Marco Giordani, Marco Mezzavilla, Michele Zorzi

Abstract: The massive amounts of bandwidth available at millimeter-wave frequencies (roughly above 10 GHz) have the potential to greatly increase the capacity of fifth generation cellular wireless systems. However, to overcome the high isotropic pathloss experienced at these frequencies, high directionality will be required at both the base station and the mobile user equipment to establish sufficient link… ▽ More The massive amounts of bandwidth available at millimeter-wave frequencies (roughly above 10 GHz) have the potential to greatly increase the capacity of fifth generation cellular wireless systems. However, to overcome the high isotropic pathloss experienced at these frequencies, high directionality will be required at both the base station and the mobile user equipment to establish sufficient link budget in wide area networks. This reliance on directionality has important implications for control layer procedures. Initial access in particular can be significantly delayed due to the need for the base station and the user to find the proper alignment for directional transmission and reception. This paper provides a survey of several recently proposed techniques for this purpose. A coverage and delay analysis is performed to compare various techniques including exhaustive and iterative search, and Context Information based algorithms. We show that the best strategy depends on the target SNR regime, and provide guidelines to characterize the optimal choice as a function of the system parameters. △ Less

Submitted 24 May, 2016; v1 submitted 24 February, 2016; originally announced February 2016.

Comments: 6 pages, 3 figures, 3 tables, 15 references, submitted to IEEE COMMAG 2016

A Framework for End-to-End Evaluation of 5G mmWave Cellular Networks in ns-3

Authors: Russell Ford, Menglei Zhang, Sourjya Dutta, Marco Mezzavilla, Sundeep Rangan, Michele Zorzi

Abstract: The growing demand for ubiquitous mobile data services along with the scarcity of spectrum in the sub-6 GHz bands has given rise to the recent interest in developing wireless systems that can exploit the large amount of spectrum available in the millimeter wave (mmWave) frequency range. Due to its potential for multi-gigabit and ultra-low latency links, mmWave technology is expected to play a cent… ▽ More The growing demand for ubiquitous mobile data services along with the scarcity of spectrum in the sub-6 GHz bands has given rise to the recent interest in developing wireless systems that can exploit the large amount of spectrum available in the millimeter wave (mmWave) frequency range. Due to its potential for multi-gigabit and ultra-low latency links, mmWave technology is expected to play a central role in 5th Generation (5G) cellular networks. Overcoming the poor radio propagation and sensitivity to blockages at higher frequencies presents major challenges, which is why much of the current research is focused at the physical layer. However, innovations will be required at all layers of the protocol stack to effectively utilize the large air link capacity and provide the end-to-end performance required by future networks. Discrete-event network simulation will be an invaluable tool for researchers to evaluate novel 5G protocols and systems from an end-to-end perspective. In this work, we present the first-of-its-kind, open-source framework for modeling mmWave cellular networks in the ns-3 simulator. Channel models are provided along with a configurable physical and MAC-layer implementation, which can be interfaced with the higher-layer protocols and core network model from the ns-3 LTE module to simulate end-to-end connectivity. The framework is demonstrated through several example simulations showing the performance of our custom mmWave stack. △ Less

Submitted 8 May, 2016; v1 submitted 22 February, 2016; originally announced February 2016.

ACM Class: I.6.5; I.6.7

Achieving Ultra-Low Latency in 5G Millimeter Wave Cellular Networks

Authors: Russell Ford, Menglei Zhang, Marco Mezzavilla, Sourjya Dutta, Sundeep Rangan, Michele Zorzi

Abstract: The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities of spectrum are available --- is a promising 5G candidate that may be able to rise to the occasion. However, while the mmWave bands can support massive peak… ▽ More The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities of spectrum are available --- is a promising 5G candidate that may be able to rise to the occasion. However, while the mmWave bands can support massive peak data rates, delivering these data rates on end-to-end service while maintaining reliability and ultra-low latency performance will require rethinking all layers of the protocol stack. This papers surveys some of the challenges and possible solutions for delivering end-to-end, reliable, ultra-low latency services in mmWave cellular systems in terms of the Medium Access Control (MAC) layer, congestion control and core network architecture. △ Less

Submitted 22 February, 2016; originally announced February 2016.

Frame Structure Design and Analysis for Millimeter Wave Cellular Systems

Authors: Sourjya Dutta, Marco Mezzavilla, Russell Ford, Menglei Zhang, Sundeep Rangan, Michele Zorzi

Abstract: The millimeter-wave (mmWave) frequencies have attracted considerable attention for fifth generation (5G) cellular communication as they offer orders of magnitude greater bandwidth than current cellular systems. However, the medium access control (MAC) layer may need to be significantly redesigned to support the highly directional transmissions, ultra-low latencies and high peak rates expected in m… ▽ More The millimeter-wave (mmWave) frequencies have attracted considerable attention for fifth generation (5G) cellular communication as they offer orders of magnitude greater bandwidth than current cellular systems. However, the medium access control (MAC) layer may need to be significantly redesigned to support the highly directional transmissions, ultra-low latencies and high peak rates expected in mmWave communication. To address these challenges, we present a novel mmWave MAC layer frame structure with a number of enhancements including flexible, highly granular transmission times, dynamic control signal locations, extended messaging and ability to efficiently multiplex directional control signals. Analytic formulae are derived for the utilization and control overhead as a function of control periodicity, number of users, traffic statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis can incorporate various front-end MIMO capability assumptions -- a critical feature of mmWave. Under realistic system and traffic assumptions, the analysis reveals that the proposed flexible frame structure design offers significant benefits over designs with fixed frame structures similar to current 4G long-term evolution (LTE). It is also shown that fully digital beamforming architectures offer significantly lower overhead compared to analog and hybrid beamforming under equivalent power budgets. △ Less

Submitted 20 August, 2016; v1 submitted 17 December, 2015; originally announced December 2015.

Comments: Submitted to IEEE Transactions for Wireless Communications

Directional Initial Access for Millimeter Wave Cellular Systems

Authors: C. Nicolas Barati, S. Amir Hosseini, Marco Mezzavilla, Sundeep Rangan, Thanasis Korakis, Shivendra S. Panwar, Michele Zorzi

Abstract: The millimeter wave (mmWave) bands have recently attracted considerable interest for next-generation cellular systems due to the massive available bandwidths at these frequencies. However, a key challenge in designing mmWave cellular systems is initial access -- the procedure by which a mobile establishes an initial link-layer connection to a base station cell. MmWave communication relies on highl… ▽ More The millimeter wave (mmWave) bands have recently attracted considerable interest for next-generation cellular systems due to the massive available bandwidths at these frequencies. However, a key challenge in designing mmWave cellular systems is initial access -- the procedure by which a mobile establishes an initial link-layer connection to a base station cell. MmWave communication relies on highly directional transmissions and the initial access procedure must thus provide a mechanism by which initial transmission directions can be searched in a potentially large angular space. Design options are compared considering different scanning and signaling procedures to evaluate access delay and system overhead. The channel structure and multiple access issues are also considered. The analysis demonstrates significant benefits of low-resolution fully digital architectures in comparison to single stream analog beamforming. △ Less

Submitted 28 July, 2016; v1 submitted 19 November, 2015; originally announced November 2015.

An MDP Model for Optimal Handover Decisions in mmWave Cellular Networks

Authors: Marco Mezzavilla, Sanjay Goyal, Shivendra Panwar, Sundeep Rangan, Michele Zorzi

Abstract: The new frontier in cellular networks is harnessing the enormous spectrum available at millimeter wave (mmWave) frequencies above 28 GHz. The challenging radio propagation characteristics at these frequencies, and the use of highly directional beamforming, lead to intermittent links between the base station (BS) and the user equipment (UE). In this paper, we revisit the problem of cell selection t… ▽ More The new frontier in cellular networks is harnessing the enormous spectrum available at millimeter wave (mmWave) frequencies above 28 GHz. The challenging radio propagation characteristics at these frequencies, and the use of highly directional beamforming, lead to intermittent links between the base station (BS) and the user equipment (UE). In this paper, we revisit the problem of cell selection to maintain an acceptable level of service, despite the underlying intermittent link connectivity typical of mmWave links. We propose a Markov Decision Process (MDP) framework to study the properties and performance of our proposed cell selection strategy, which jointly considers several factors such as dynamic channel load and link quality. We use the Value Iteration Algorithm (VIA) to solve the MDP, and obtain the optimal set of associations. We address the multi user problem through a distributed iterative approach, in which each UE characterizes the evolution of the system based on stationary channel distribution and cell selection statistics of other UEs. Through simulation results, we show that our proposed technique makes judicious handoff choices, thereby providing a significant improvement in the overall network capacity. Further, our technique reduces the total number of handoffs, thus lowering the signaling overhead, while providing a higher quality of service to the UEs. △ Less

Submitted 6 June, 2016; v1 submitted 1 July, 2015; originally announced July 2015.

Comments: 6 pages, to be appeared in the Proceedings of EUCNC 2016

5G mmWave Module for ns-3 Network Simulator

Authors: Marco Mezzavilla, Sourjya Dutta, Menglei Zhang, Mustafa Riza Akdeniz, Sundeep Rangan

Abstract: The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and mo… ▽ More The increasing demand of data, along with the spectrum scarcity, are motivating a urgent shift towards exploiting new bands. This is the main reason behind identifying mmWaves as the key disruptive enabling technology for 5G cellular networks. Indeed, utilizing new bands means facing new challenges; in this context, they are mainly related to the radio propagation, which is shorter in range and more sensitive to obstacles. The resulting key aspects that need to be taken into account when designing mmWave cellular systems are directionality and link intermittency. The lack of network level results motivated this work, which aims at providing the first of a kind open source mmWave framework, based on the network simulator ns-3. The main focus of this work is the modeling of customizable channel, physical (PHY) and medium access control (MAC) layers for mmWave systems. The overall design and architecture of the model are discussed in details. Finally, the validity of our proposed framework is corroborated through the simulation of a simple scenario. △ Less

Submitted 29 June, 2015; originally announced June 2015.

Dynamic Time-domain Duplexing for Self-backhauled Millimeter Wave Cellular Networks

Authors: Russell Ford, Felipe Gomez-Cuba, Marco Mezzavilla, Sundeep Rangan

Abstract: Millimeter wave (mmW) bands between 30 and 300 GHz have attracted considerable attention for next-generation cellular networks due to vast quantities of available spectrum and the possibility of very high-dimensional antenna ar-rays. However, a key issue in these systems is range: mmW signals are extremely vulnerable to shadowing and poor high-frequency propagation. Multi-hop relaying is therefore… ▽ More Millimeter wave (mmW) bands between 30 and 300 GHz have attracted considerable attention for next-generation cellular networks due to vast quantities of available spectrum and the possibility of very high-dimensional antenna ar-rays. However, a key issue in these systems is range: mmW signals are extremely vulnerable to shadowing and poor high-frequency propagation. Multi-hop relaying is therefore a natural technology for such systems to improve cell range and cell edge rates without the addition of wired access points. This paper studies the problem of scheduling for a simple infrastructure cellular relay system where communication between wired base stations and User Equipment follow a hierarchical tree structure through fixed relay nodes. Such a systems builds naturally on existing cellular mmW backhaul by adding mmW in the access links. A key feature of the proposed system is that TDD duplexing selections can be made on a link-by-link basis due to directional isolation from other links. We devise an efficient, greedy algorithm for centralized scheduling that maximizes network utility by jointly optimizing the duplexing schedule and resources allocation for dense, relay-enhanced OFDMA/TDD mmW networks. The proposed algorithm can dynamically adapt to loading, channel conditions and traffic demands. Significant throughput gains and improved resource utilization offered by our algorithm over the static, globally-synchronized TDD patterns are demonstrated through simulations based on empirically-derived channel models at 28 GHz. △ Less

Submitted 25 June, 2015; originally announced June 2015.

Comments: IEEE Workshop on Next Generation Backhaul/Fronthaul Networks - BackNets 2015