-
Targeted Drug Delivery: Algorithmic Methods for Collecting a Swarm of Particles with Uniform External Forces
Authors:
Aaron T. Becker,
Sándor P. Fekete,
Li Huang,
Phillip Keldenich,
Linda Kleist,
Dominik Krupke,
Christian Rieck,
Arne Schmidt
Abstract:
We investigate algorithmic approaches for targeted drug delivery in a complex, maze-like environment, such as a vascular system. The basic scenario is given by a large swarm of micro-scale particles (''agents'') and a particular target region (''tumor'') within a system of passageways. Agents are too small to contain on-board power or computation and are instead controlled by a global external for…
▽ More
We investigate algorithmic approaches for targeted drug delivery in a complex, maze-like environment, such as a vascular system. The basic scenario is given by a large swarm of micro-scale particles (''agents'') and a particular target region (''tumor'') within a system of passageways. Agents are too small to contain on-board power or computation and are instead controlled by a global external force that acts uniformly on all particles, such as an applied fluidic flow or electromagnetic field. The challenge is to deliver all agents to the target region with a minimum number of actuation steps.
We provide a number of results for this challenge. We show that the underlying problem is NP-complete, which explains why previous work did not provide provably efficient algorithms. We also develop several algorithmic approaches that greatly improve the worst-case guarantees for the number of required actuation steps. We evaluate our algorithmic approaches by numerous simulations, both for deterministic algorithms and searches supported by deep learning, which show that the performance is practically promising.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
On the Connectivity of the Flip Graph of Plane Spanning Paths
Authors:
Linda Kleist,
Peter Kramer,
Christian Rieck
Abstract:
Flip graphs of non-crossing configurations in the plane are widely studied objects, e.g., flip graph of triangulations, spanning trees, Hamiltonian cycles, and perfect matchings. Typically, it is an easy exercise to prove connectivity of a flip graph. In stark contrast, the connectivity of the flip graph of plane spanning paths on point sets in general position has been an open problem for more th…
▽ More
Flip graphs of non-crossing configurations in the plane are widely studied objects, e.g., flip graph of triangulations, spanning trees, Hamiltonian cycles, and perfect matchings. Typically, it is an easy exercise to prove connectivity of a flip graph. In stark contrast, the connectivity of the flip graph of plane spanning paths on point sets in general position has been an open problem for more than 16 years.
In order to provide new insights, we investigate certain induced subgraphs. Firstly, we provide tight bounds on the diameter and the radius of the flip graph of spanning paths on points in convex position with one fixed endpoint. Secondly, we show that so-called suffix-independent paths induce a connected subgraph. Consequently, to answer the open problem affirmatively, it suffices to show that each path can be flipped to some suffix-independent path. Lastly, we investigate paths where one endpoint is fixed and provide tools to flip to suffix-independent paths. We show that these tools are strong enough to show connectivity of the flip graph of plane spanning paths on point sets with at most two convex layers.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Dispersive Vertex Guarding for Simple and Non-Simple Polygons
Authors:
Sándor P. Fekete,
Joseph S. B. Mitchell,
Christian Rieck,
Christian Scheffer,
Christiane Schmidt
Abstract:
We study the Dispersive Art Gallery Problem with vertex guards: Given a polygon $\mathcal{P}$, with pairwise geodesic Euclidean vertex distance of at least $1$, and a rational number $\ell$; decide whether there is a set of vertex guards such that $\mathcal{P}$ is guarded, and the minimum geodesic Euclidean distance between any two guards (the so-called dispersion distance) is at least $\ell$.
W…
▽ More
We study the Dispersive Art Gallery Problem with vertex guards: Given a polygon $\mathcal{P}$, with pairwise geodesic Euclidean vertex distance of at least $1$, and a rational number $\ell$; decide whether there is a set of vertex guards such that $\mathcal{P}$ is guarded, and the minimum geodesic Euclidean distance between any two guards (the so-called dispersion distance) is at least $\ell$.
We show that it is NP-complete to decide whether a polygon with holes has a set of vertex guards with dispersion distance $2$. On the other hand, we provide an algorithm that places vertex guards in simple polygons at dispersion distance at least $2$. This result is tight, as there are simple polygons in which any vertex guard set has a dispersion distance of at most $2$.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
Guarding Polyominoes under $k$-Hop Visibility
Authors:
Omrit Filtser,
Erik Krohn,
Bengt J. Nilsson,
Christian Rieck,
Christiane Schmidt
Abstract:
We study the Art Gallery Problem under $k$-hop visibility in polyominoes. In this visibility model, two unit squares of a polyomino can see each other if and only if the shortest path between the respective vertices in the dual graph of the polyomino has length at most $k$.
In this paper, we show that the VC dimension of this problem is $3$ in simple polyominoes, and $4$ in polyominoes with hole…
▽ More
We study the Art Gallery Problem under $k$-hop visibility in polyominoes. In this visibility model, two unit squares of a polyomino can see each other if and only if the shortest path between the respective vertices in the dual graph of the polyomino has length at most $k$.
In this paper, we show that the VC dimension of this problem is $3$ in simple polyominoes, and $4$ in polyominoes with holes. Furthermore, we provide a reduction from Planar Monotone 3Sat, thereby showing that the problem is NP-complete even in thin polyominoes (i.e., polyominoes that do not a contain a $2\times 2$ block of cells). Complementarily, we present a linear-time $4$-approximation algorithm for simple $2$-thin polyominoes (which do not contain a $3\times 3$ block of cells) for all $k\in \mathbb{N}$.
△ Less
Submitted 15 January, 2024; v1 submitted 1 August, 2023;
originally announced August 2023.
-
The Lawn Mowing Problem: From Algebra to Algorithms
Authors:
Sándor P. Fekete,
Dominik Krupke,
Michael Perk,
Christian Rieck,
Christian Scheffer
Abstract:
For a given polygonal region $P$, the Lawn Mowing Problem (LMP) asks for a shortest tour $T$ that gets within Euclidean distance 1/2 of every point in $P$; this is equivalent to computing a shortest tour for a unit-diameter cutter $C$ that covers all of $P$. As a generalization of the Traveling Salesman Problem, the LMP is NP-hard; unlike the discrete TSP, however, the LMP has defied efforts to ac…
▽ More
For a given polygonal region $P$, the Lawn Mowing Problem (LMP) asks for a shortest tour $T$ that gets within Euclidean distance 1/2 of every point in $P$; this is equivalent to computing a shortest tour for a unit-diameter cutter $C$ that covers all of $P$. As a generalization of the Traveling Salesman Problem, the LMP is NP-hard; unlike the discrete TSP, however, the LMP has defied efforts to achieve exact solutions, due to its combination of combinatorial complexity with continuous geometry.
We provide a number of new contributions that provide insights into the involved difficulties, as well as positive results that enable both theoretical and practical progress. (1) We show that the LMP is algebraically hard: it is not solvable by radicals over the field of rationals, even for the simple case in which $P$ is a $2\times 2$ square. This implies that it is impossible to compute exact optimal solutions under models of computation that rely on elementary arithmetic operations and the extraction of $k$th roots, and explains the perceived practical difficulty. (2) We exploit this algebraic analysis for the natural class of polygons with axis-parallel edges and integer vertices (i.e., polyominoes), highlighting the relevance of turn-cost minimization for Lawn Mowing tours, and leading to a general construction method for feasible tours. (3) We show that this construction method achieves theoretical worst-case guarantees that improve previous approximation factors for polyominoes. (4) We demonstrate the practical usefulness \emph{beyond polyominoes} by performing an extensive practical study on a spectrum of more general benchmark polygons: We obtain solutions that are better than the previous best values by Fekete et al., for instance sizes up to $20$ times larger.
△ Less
Submitted 3 July, 2023;
originally announced July 2023.
-
Reconfiguration of a 2D Structure Using Spatio-Temporal Planning and Load Transferring
Authors:
Javier Garcia,
Michael Yannuzzi,
Peter Kramer,
Christian Rieck,
Sándor P. Fekete,
Aaron T. Becker
Abstract:
We present progress on the problem of reconfiguring a 2D arrangement of building material by a cooperative group of robots. These robots must avoid collisions, deadlocks, and are subjected to the constraint of maintaining connectivity of the structure. We develop two reconfiguration methods, one based on spatio-temporal planning, and one based on target swapping, to increase building efficiency. T…
▽ More
We present progress on the problem of reconfiguring a 2D arrangement of building material by a cooperative group of robots. These robots must avoid collisions, deadlocks, and are subjected to the constraint of maintaining connectivity of the structure. We develop two reconfiguration methods, one based on spatio-temporal planning, and one based on target swapping, to increase building efficiency. The first method can significantly reduce planning times compared to other multi-robot planners. The second method helps to reduce the amount of time robots spend waiting for paths to be cleared, and the overall distance traveled by the robots.
△ Less
Submitted 7 March, 2024; v1 submitted 16 November, 2022;
originally announced November 2022.
-
A Closer Cut: Computing Near-Optimal Lawn Mowing Tours
Authors:
Sándor P. Fekete,
Dominik Krupke,
Michael Perk,
Christian Rieck,
Christian Scheffer
Abstract:
For a given polygonal region $P$, the Lawn Mowing Problem (LMP) asks for a shortest tour $T$ that gets within Euclidean distance 1 of every point in $P$; this is equivalent to computing a shortest tour for a unit-disk cutter $C$ that covers all of $P$. As a geometric optimization problem of natural practical and theoretical importance, the LMP generalizes and combines several notoriously difficult…
▽ More
For a given polygonal region $P$, the Lawn Mowing Problem (LMP) asks for a shortest tour $T$ that gets within Euclidean distance 1 of every point in $P$; this is equivalent to computing a shortest tour for a unit-disk cutter $C$ that covers all of $P$. As a geometric optimization problem of natural practical and theoretical importance, the LMP generalizes and combines several notoriously difficult problems, including minimum covering by disks, the Traveling Salesman Problem with neighborhoods (TSPN), and the Art Gallery Problem (AGP).
In this paper, we conduct the first study of the Lawn Mowing Problem with a focus on practical computation of near-optimal solutions. We provide new theoretical insights: Optimal solutions are polygonal paths with a bounded number of vertices, allowing a restriction to straight-line solutions; on the other hand, there can be relatively simple instances for which optimal solutions require a large class of irrational coordinates. On the practical side, we present a primal-dual approach with provable convergence properties based on solving a special case of the TSPN restricted to witness sets. In each iteration, this establishes both a valid solution and a valid lower bound, and thereby a bound on the remaining optimality gap. As we demonstrate in an extensive computational study, this allows us to achieve provably optimal and near-optimal solutions for a large spectrum of benchmark instances with up to 2000 vertices.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Efficiently Reconfiguring a Connected Swarm of Labeled Robots
Authors:
Sándor P. Fekete,
Peter Kramer,
Christian Rieck,
Christian Scheffer,
Arne Schmidt
Abstract:
When considering motion planning for a swarm of $n$ labeled robots, we need to rearrange a given start configuration into a desired target configuration via a sequence of parallel, collision-free robot motions. The objective is to reach the new configuration in a minimum amount of time; an important constraint is to keep the swarm connected at all times. Problems of this type have been considered…
▽ More
When considering motion planning for a swarm of $n$ labeled robots, we need to rearrange a given start configuration into a desired target configuration via a sequence of parallel, collision-free robot motions. The objective is to reach the new configuration in a minimum amount of time; an important constraint is to keep the swarm connected at all times. Problems of this type have been considered before, with recent notable results achieving constant stretch for not necessarily connected reconfiguration: If mapping the start configuration to the target configuration requires a maximum Manhattan distance of $d$, the total duration of an overall schedule can be bounded to $\mathcal{O}(d)$, which is optimal up to constant factors. However, constant stretch could only be achieved if disconnected reconfiguration is allowed, or for scaled configurations (which arise by increasing all dimensions of a given object by the same multiplicative factor) of unlabeled robots.
We resolve these major open problems by (1) establishing a lower bound of $Ω(\sqrt{n})$ for connected, labeled reconfiguration and, most importantly, by (2) proving that for scaled arrangements, constant stretch for connected reconfiguration can be achieved. In addition, we show that (3) it is NP-complete to decide whether a makespan of 2 can be achieved, while it is possible to check in polynomial time whether a makespan of 1 can be achieved.
△ Less
Submitted 24 July, 2024; v1 submitted 22 September, 2022;
originally announced September 2022.
-
The Dispersive Art Gallery Problem
Authors:
Christian Rieck,
Christian Scheffer
Abstract:
We introduce a new variant of the art gallery problem that comes from safety issues. In this variant we are not interested in guard sets of smallest cardinality, but in guard sets with largest possible distances between these guards. To the best of our knowledge, this variant has not been considered before. We call it the Dispersive Art Gallery Problem. In particular, in the dispersive art gallery…
▽ More
We introduce a new variant of the art gallery problem that comes from safety issues. In this variant we are not interested in guard sets of smallest cardinality, but in guard sets with largest possible distances between these guards. To the best of our knowledge, this variant has not been considered before. We call it the Dispersive Art Gallery Problem. In particular, in the dispersive art gallery problem we are given a polygon $\mathcal{P}$ and a real number $\ell$, and want to decide whether $\mathcal{P}$ has a guard set such that every pair of guards in this set is at least a distance of $\ell$ apart.
In this paper, we study the vertex guard variant of this problem for the class of polyominoes. We consider rectangular visibility and distances as geodesics in the $L_1$-metric. Our results are as follows. We give a (simple) thin polyomino such that every guard set has minimum pairwise distances of at most $3$. On the positive side, we describe an algorithm that computes guard sets for simple polyominoes that match this upper bound, i.e., the algorithm constructs worst-case optimal solutions. We also study the computational complexity of computing guard sets that maximize the smallest distance between all pairs of guards within the guard sets. We prove that deciding whether there exists a guard set realizing a minimum pairwise distance for all pairs of guards of at least $5$ in a given polyomino is NP-complete. We were also able to find an optimal dynamic programming approach that computes a guard set that maximizes the minimum pairwise distance between guards in tree-shaped polyominoes, i.e., computes optimal solutions. Because the shapes constructed in the NP-hardness reduction are thin as well (but have holes), this result completes the case for thin polyominoes.
△ Less
Submitted 8 September, 2023; v1 submitted 21 September, 2022;
originally announced September 2022.
-
Connected Reconfiguration of Polyominoes Amid Obstacles using RRT*
Authors:
Javier Garcia,
Michael Yannuzzi,
Peter Kramer,
Christian Rieck,
Aaron T. Becker
Abstract:
This paper investigates the use of a sampling-based approach, the RRT*, to reconfigure a 2D set of connected tiles in complex environments, where multiple obstacles might be present. Since the target application is automated building of discrete, cellular structures using mobile robots, there are constraints that determine what tiles can be picked up and where they can be dropped off during reconf…
▽ More
This paper investigates the use of a sampling-based approach, the RRT*, to reconfigure a 2D set of connected tiles in complex environments, where multiple obstacles might be present. Since the target application is automated building of discrete, cellular structures using mobile robots, there are constraints that determine what tiles can be picked up and where they can be dropped off during reconfiguration. We compare our approach to two algorithms as global and local planners, and show that we are able to find more efficient build sequences using a reasonable number of samples, in environments with varying densities of obstacles.
△ Less
Submitted 26 October, 2022; v1 submitted 4 July, 2022;
originally announced July 2022.
-
Connected Coordinated Motion Planning with Bounded Stretch
Authors:
Sándor P. Fekete,
Phillip Keldenich,
Ramin Kosfeld,
Christian Rieck,
Christian Scheffer
Abstract:
We consider the problem of connected coordinated motion planning for a large collective of simple, identical robots: From a given start grid configuration of robots, we need to reach a desired target configuration via a sequence of parallel, collision-free robot motions, such that the set of robots induces a connected grid graph at all integer times. The objective is to minimize the makespan of th…
▽ More
We consider the problem of connected coordinated motion planning for a large collective of simple, identical robots: From a given start grid configuration of robots, we need to reach a desired target configuration via a sequence of parallel, collision-free robot motions, such that the set of robots induces a connected grid graph at all integer times. The objective is to minimize the makespan of the motion schedule, i.e., to reach the new configuration in a minimum amount of time. We show that this problem is NP-complete, even for deciding whether a makespan of 2 can be achieved, while it is possible to check in polynomial time whether a makespan of 1 can be achieved. On the algorithmic side, we establish simultaneous constant-factor approximation for two fundamental parameters, by achieving constant stretch for constant scale. Scaled shapes (which arise by increasing all dimensions of a given object by the same multiplicative factor) have been considered in previous seminal work on self-assembly, often with unbounded or logarithmic scale factors; we provide methods for a generalized scale factor, bounded by a constant. Moreover, our algorithm achieves a constant stretch factor: If mapping the start configuration to the target configuration requires a maximum Manhattan distance of $d$, then the total duration of our overall schedule is $\mathcal{O}(d)$, which is optimal up to constant factors.
△ Less
Submitted 13 October, 2023; v1 submitted 25 September, 2021;
originally announced September 2021.
-
Particle-Based Assembly Using Precise Global Control
Authors:
Jakob Keller,
Christian Rieck,
Christian Scheffer,
Arne Schmidt
Abstract:
In micro- and nano-scale systems, particles can be moved by using an external force like gravity or a magnetic field. In the presence of adhesive particles that can attach to each other, the challenge is to decide whether a shape is constructible. Previous work provides a class of shapes for which constructibility can be decided efficiently when particles move maximally into the same direction ind…
▽ More
In micro- and nano-scale systems, particles can be moved by using an external force like gravity or a magnetic field. In the presence of adhesive particles that can attach to each other, the challenge is to decide whether a shape is constructible. Previous work provides a class of shapes for which constructibility can be decided efficiently when particles move maximally into the same direction induced by a global signal.
In this paper we consider the single step model, i.e., a model in which each particle moves one unit step into the given direction. We restrict the assembly process such that at each single time step actually one particle is added to and moved within the workspace. We prove that deciding constructibility is NP-complete for three-dimensional shapes, and that a maximum constructible shape can be approximated. The same approximation algorithm applies for 2D. We further present linear-time algorithms to decide whether or not a tree-shape in 2D or 3D is constructible. Scaling a shape yields constructibility; in particular we show that the $2$-scaled copy of every non-degenerate polyomino is constructible. In the three-dimensional setting we show that the $3$-scaled copy of every non-degenerate polycube is constructible.
△ Less
Submitted 15 June, 2022; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Don't Rock the Boat: Algorithms for Balanced Dynamic Loading and Unloading
Authors:
Sándor P. Fekete,
Sven von Höveling,
Joseph S. B. Mitchell,
Christian Rieck,
Christian Scheffer,
Arne Schmidt,
James R. Zuber
Abstract:
We consider dynamic loading and unloading problems for heavy geometric objects. The challenge is to maintain balanced configurations at all times: minimize the maximal motion of the overall center of gravity. While this problem has been studied from an algorithmic point of view, previous work only focuses on balancing the final center of gravity; we give a variety of results for computing balanced…
▽ More
We consider dynamic loading and unloading problems for heavy geometric objects. The challenge is to maintain balanced configurations at all times: minimize the maximal motion of the overall center of gravity. While this problem has been studied from an algorithmic point of view, previous work only focuses on balancing the final center of gravity; we give a variety of results for computing balanced loading and unloading schemes that minimize the maximal motion of the center of gravity during the entire process. In particular, we consider the one-dimensional case and distinguish between loading and unloading. In the unloading variant, the positions of the intervals are given, and we search for an optimal unloading order of the intervals. We prove that the unloading variant is NP-complete and give a 2.7-approximation algorithm. In the loading variant, we have to compute both the positions of the intervals and their loading order. We give optimal approaches for several variants that model different loading scenarios that may arise, e.g., in the loading of a transport ship with containers.
△ Less
Submitted 17 January, 2018; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Tilt Assembly: Algorithms for Micro-Factories That Build Objects with Uniform External Forces
Authors:
Aaron T. Becker,
Sándor P. Fekete,
Phillip Keldenich,
Dominik Krupke,
Christian Rieck,
Christian Scheffer,
Arne Schmidt
Abstract:
We present algorithmic results for the parallel assembly of many micro-scale objects in two and three dimensions from tiny particles, which has been proposed in the context of programmable matter and self-assembly for building high-yield micro-factories. The underlying model has particles moving under the influence of uniform external forces until they hit an obstacle; particles can bond when bein…
▽ More
We present algorithmic results for the parallel assembly of many micro-scale objects in two and three dimensions from tiny particles, which has been proposed in the context of programmable matter and self-assembly for building high-yield micro-factories. The underlying model has particles moving under the influence of uniform external forces until they hit an obstacle; particles can bond when being forced together with another appropriate particle. Due to the physical and geometric constraints, not all shapes can be built in this manner; this gives rise to the Tilt Assembly Problem (TAP) of deciding constructibility. For simply-connected polyominoes $P$ in 2D consisting of $N$ unit-squares ("tiles"), we prove that TAP can be decided in $O(N\log N)$ time. For the optimization variant MaxTAP (in which the objective is to construct a subshape of maximum possible size), we show polyAPX-hardness: unless P=NP, MaxTAP cannot be approximated within a factor of $Ω(N^{\frac{1}{3}})$; for tree-shaped structures, we give an $O(N^{\frac{1}{2}})$-approximation algorithm. For the efficiency of the assembly process itself, we show that any constructible shape allows pipelined assembly, which produces copies of $P$ in $O(1)$ amortized time, i.e., $N$ copies of $P$ in $O(N)$ time steps. These considerations can be extended to three-dimensional objects: For the class of polycubes $P$ we prove that it is NP-hard to decide whether it is possible to construct a path between two points of $P$; it is also NP-hard to decide constructibility of a polycube $P$. Moreover, it is expAPX-hard to maximize a path from a given start point.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.