-
Application-Oriented Co-Design of Motors and Motions for a 6DOF Robot Manipulator
Authors:
Adrian Stein,
Yebin Wang,
Yusuke Sakamoto,
Bingnan Wang,
Huazhen Fang
Abstract:
This work investigates an application-driven co-design problem where the motion and motors of a six degrees of freedom robotic manipulator are optimized simultaneously, and the application is characterized by a set of tasks. Unlike the state-of-the-art which selects motors from a product catalogue and performs co-design for a single task, this work designs the motor geometry as well as motion for…
▽ More
This work investigates an application-driven co-design problem where the motion and motors of a six degrees of freedom robotic manipulator are optimized simultaneously, and the application is characterized by a set of tasks. Unlike the state-of-the-art which selects motors from a product catalogue and performs co-design for a single task, this work designs the motor geometry as well as motion for a specific application. Contributions are made towards solving the proposed co-design problem in a computationally-efficient manner. First, a two-step process is proposed, where multiple motor designs are identified by optimizing motions and motors for multiple tasks one by one, and then are reconciled to determine the final motor design. Second, magnetic equivalent circuit modeling is exploited to establish the analytic mapping from motor design parameters to dynamic models and objective functions to facilitate the subsequent differentiable simulation. Third, a direct-collocation-based differentiable simulator of motor and robotic arm dynamics is developed to balance the computational complexity and numerical stability. Simulation verifies that higher performance for a specific application can be achieved with the multi-task method, compared to several benchmark co-design methods.
△ Less
Submitted 4 October, 2023;
originally announced October 2023.
-
Optimization of Velocity Ramps with Survival Analysis for Intersection Merge-Ins
Authors:
Tim Puphal,
Malte Probst,
Yiyang Li,
Yosuke Sakamoto,
Julian Eggert
Abstract:
We consider the problem of correct motion planning for T-intersection merge-ins of arbitrary geometry and vehicle density. A merge-in support system has to estimate the chances that a gap between two consecutive vehicles can be taken successfully. In contrast to previous models based on heuristic gap size rules, we present an approach which optimizes the integral risk of the situation using parame…
▽ More
We consider the problem of correct motion planning for T-intersection merge-ins of arbitrary geometry and vehicle density. A merge-in support system has to estimate the chances that a gap between two consecutive vehicles can be taken successfully. In contrast to previous models based on heuristic gap size rules, we present an approach which optimizes the integral risk of the situation using parametrized velocity ramps. It accounts for the risks from curves and all involved vehicles (front and rear on all paths) with a so-called survival analysis. For comparison, we also introduce a specially designed extension of the Intelligent Driver Model (IDM) for entering intersections. We show in a quantitative statistical evaluation that the survival method provides advantages in terms of lower absolute risk (i.e., no crash happens) and better risk-utility tradeoff (i.e., making better use of appearing gaps). Furthermore, our approach generalizes to more complex situations with additional risk sources.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
Bipedal Robot Running: Human-like Actuation Timing Using Fast and Slow Adaptations
Authors:
Yusuke Sakurai,
Tomoya Kamimura,
Yuki Sakamoto,
Shohei Nishii,
Kodai Sato,
Yuta Fujiwara,
Akihito Sano
Abstract:
We have been developing human-sized biped robots based on passive dynamic mechanisms. In human locomotion, the muscles activate at the same rate relative to the gait cycle during running. To achieve adaptive running for robots, such characteristics should be reproduced to yield the desired effect, In this study, we designed a central pattern generator (CPG) involving fast and slow adaptation to ac…
▽ More
We have been developing human-sized biped robots based on passive dynamic mechanisms. In human locomotion, the muscles activate at the same rate relative to the gait cycle during running. To achieve adaptive running for robots, such characteristics should be reproduced to yield the desired effect, In this study, we designed a central pattern generator (CPG) involving fast and slow adaptation to achieve human-like running using a simple spring-mass model and our developed bipedal robot, which is equipped with actuators that imitate the human musculoskeletal system. Our results demonstrate that the CPG-based controller with fast and slow adaptations, and a adjustable actuator control timing can reproduce human-like running. The results suggest that the CPG contributes to the adjustment of the muscle activation timing in human running.
△ Less
Submitted 13 March, 2024; v1 submitted 1 March, 2023;
originally announced March 2023.
-
A Principled Approach to Failure Analysis and Model Repairment: Demonstration in Medical Imaging
Authors:
Thomas Henn,
Yasukazu Sakamoto,
Clément Jacquet,
Shunsuke Yoshizawa,
Masamichi Andou,
Stephen Tchen,
Ryosuke Saga,
Hiroyuki Ishihara,
Katsuhiko Shimizu,
Yingzhen Li,
Ryutaro Tanno
Abstract:
Machine learning models commonly exhibit unexpected failures post-deployment due to either data shifts or uncommon situations in the training environment. Domain experts typically go through the tedious process of inspecting the failure cases manually, identifying failure modes and then attempting to fix the model. In this work, we aim to standardise and bring principles to this process through an…
▽ More
Machine learning models commonly exhibit unexpected failures post-deployment due to either data shifts or uncommon situations in the training environment. Domain experts typically go through the tedious process of inspecting the failure cases manually, identifying failure modes and then attempting to fix the model. In this work, we aim to standardise and bring principles to this process through answering two critical questions: (i) how do we know that we have identified meaningful and distinct failure types?; (ii) how can we validate that a model has, indeed, been repaired? We suggest that the quality of the identified failure types can be validated through measuring the intra- and inter-type generalisation after fine-tuning and introduce metrics to compare different subtyping methods. Furthermore, we argue that a model can be considered repaired if it achieves high accuracy on the failure types while retaining performance on the previously correct data. We combine these two ideas into a principled framework for evaluating the quality of both the identified failure subtypes and model repairment. We evaluate its utility on a classification and an object detection tasks. Our code is available at https://github.com/Rokken-lab6/Failure-Analysis-and-Model-Repairment
△ Less
Submitted 25 September, 2021;
originally announced September 2021.
-
Collective Creativity: Where we are and where we might go
Authors:
Lixiu Yu,
Jeffrey V. Nickerson,
Yasuaki Sakamoto
Abstract:
Creativity is individual, and it is social. The social aspects of creativity have become of increasing interest as systems have emerged that mobilize large numbers of people to engage in creative tasks. We examine research related to collective intelligence and differentiate work on collective creativity from other collective activities by analyzing systems with respect to the tasks that are perfo…
▽ More
Creativity is individual, and it is social. The social aspects of creativity have become of increasing interest as systems have emerged that mobilize large numbers of people to engage in creative tasks. We examine research related to collective intelligence and differentiate work on collective creativity from other collective activities by analyzing systems with respect to the tasks that are performed and the outputs that result. Three types of systems are discussed: games, contests and networks. We conclude by suggesting how systems that generate collective creativity can be improved and how new systems might be constructed.
△ Less
Submitted 16 April, 2012;
originally announced April 2012.
