-
Large Scale Masked Autoencoding for Reducing Label Requirements on SAR Data
Authors:
Matt Allen,
Francisco Dorr,
Joseph A. Gallego-Mejia,
Laura Martínez-Ferrer,
Anna Jungbluth,
Freddie Kalaitzis,
Raúl Ramos-Pollán
Abstract:
Satellite-based remote sensing is instrumental in the monitoring and mitigation of the effects of anthropogenic climate change. Large scale, high resolution data derived from these sensors can be used to inform intervention and policy decision making, but the timeliness and accuracy of these interventions is limited by use of optical data, which cannot operate at night and is affected by adverse w…
▽ More
Satellite-based remote sensing is instrumental in the monitoring and mitigation of the effects of anthropogenic climate change. Large scale, high resolution data derived from these sensors can be used to inform intervention and policy decision making, but the timeliness and accuracy of these interventions is limited by use of optical data, which cannot operate at night and is affected by adverse weather conditions. Synthetic Aperture Radar (SAR) offers a robust alternative to optical data, but its associated complexities limit the scope of labelled data generation for traditional deep learning. In this work, we apply a self-supervised pretraining scheme, masked autoencoding, to SAR amplitude data covering 8.7\% of the Earth's land surface area, and tune the pretrained weights on two downstream tasks crucial to monitoring climate change - vegetation cover prediction and land cover classification. We show that the use of this pretraining scheme reduces labelling requirements for the downstream tasks by more than an order of magnitude, and that this pretraining generalises geographically, with the performance gain increasing when tuned downstream on regions outside the pretraining set. Our findings significantly advance climate change mitigation by facilitating the development of task and region-specific SAR models, allowing local communities and organizations to deploy tailored solutions for rapid, accurate monitoring of climate change effects.
△ Less
Submitted 2 December, 2023; v1 submitted 1 October, 2023;
originally announced October 2023.
-
A Low-cost Through-metal Communication System for Sensors in Metallic Pipes
Authors:
Hongzhi Guo,
Marlin Prince,
Javionn Ramsey,
Jarvis Turner,
Marcus Allen,
Chevel Samuels,
Jordan Atta Nuako
Abstract:
Metallic pipes and other containers are widely used to store and transport toxic gases and liquids. Various sensors have been designed to monitor the environment inside metallic pipes and containers, such as pressure, liquid-level, and chemical sensors. Moreover, sensors are also used to inspect and detect pipe leakages. However, sensors are usually placed outside of metallic pipes and containers…
▽ More
Metallic pipes and other containers are widely used to store and transport toxic gases and liquids. Various sensors have been designed to monitor the environment inside metallic pipes and containers, such as pressure, liquid-level, and chemical sensors. Moreover, sensors are also used to inspect and detect pipe leakages. However, sensors are usually placed outside of metallic pipes and containers and use ultrasound to monitor the internal unseen environment. This is mainly due to the fact that internal sensors cannot communicate with external data sinks without cables, but using cables can dramatically affect the metal-sealed structure. Wireless communication is desirable to communicate with internal sensors, but it experiences high attenuation losses since metal can block wireless signals due to its high conductivity. This paper develops a low-cost through-metal communication system prototype using off-the-shelf electronic components. The system is fully reconfigurable, and arbitrary modulation and coding schemes can be implemented. We design the transmit module which includes a signal processing microcontroller, an amplifier, and a transmit coil, and the receive module which includes a receive coil, an amplifier, and a microcontroller with demodulation algorithms and bit-error-rate (BER) calculations. The performance of the prototype is evaluated using various symbol rates, distances, and transmission power. The results show that the communication system can achieve a 500 bps data rate with 0.01 BER and 3.4 cm communication range when penetrating an Aluminum pipe with 7 mm thickness.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Waveforms and End-to-End Efficiency in RF Wireless Power Transfer Using Digital Radio Transmitter
Authors:
Nachiket Ayir,
Taneli Riihonen,
Markus Allén,
Marcelo Fabián Trujillo Fierro
Abstract:
We study radio-frequency (RF) wireless power transfer (WPT) using a digital radio transmitter for applications where alternative analog transmit circuits are impractical. An important paramter for assessing the viability of an RF WPT system is its end-to-end efficiency. In this regard, we present a prototype test-bed comprising a software-defined radio (SDR) transmitter and an energy harvesting re…
▽ More
We study radio-frequency (RF) wireless power transfer (WPT) using a digital radio transmitter for applications where alternative analog transmit circuits are impractical. An important paramter for assessing the viability of an RF WPT system is its end-to-end efficiency. In this regard, we present a prototype test-bed comprising a software-defined radio (SDR) transmitter and an energy harvesting receiver with a low resistive load; employing an SDR makes our research meaningful for simultaneous wireless information and power transfer (SWIPT). We analyze the effect of clipping and non-linear amplification at the SDR on multisine waveforms. Our experiments suggest that when the DC input power at the transmitter is constant, high peak-to-average power ratio (PAPR) multisine are unsuitable for RF WPT over a flat-fading channel, due to their low average radiated power. The results indicate that the end-to-end efficiency is positively correlated to the average RF power of the waveform, and that it reduces with increasing PAPR. Consequently, digital modulations such as phase-shift keying (PSK) and quadrature amplitude modeulation (QAM) yield better end-to-end efficiency than multisines. Moreover, the end-to-end efficiency of PSK and QAM signals is invariant of the transmission bit rate. An in-depth analysis of the end-to-end efficiency of WPT reveals that the transmitter efficiency is lower than the receiver efficiency. Furthermore, we study the impact of a reflecting surface on the end-to-end efficiency of WPT, and assess the transmission quality of the information signals by evaluating their error vector magnitude (EVM) for SWIPT. Overall, the experimental observations of end-to-end efficiency and EVM suggest that, while employing an SDR transmitter with fixed DC input power, a baseband quadrature PSK signal is most suitable for SWIPT at large, among PSK and QAM signals.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
Experimental assessment of polynomial nonlinear state-space and nonlinear-mode models for near-resonant vibrations
Authors:
Maren Scheel,
Gleb Kleyman,
Ali Tatar,
Matthew R. W. Brake,
Simon Peter,
Jean-Philippe Noël,
Matthew S. Allen,
Malte Krack
Abstract:
In the present paper, two existing nonlinear system identification methodologies are used to identify data-driven models. The first methodology focuses on identifying the system using steady-state excitations. To accomplish this, a phase-locked loop controller is implemented to acquire periodic oscillations near resonance and construct a nonlinear-mode model. This model is based on amplitude-depen…
▽ More
In the present paper, two existing nonlinear system identification methodologies are used to identify data-driven models. The first methodology focuses on identifying the system using steady-state excitations. To accomplish this, a phase-locked loop controller is implemented to acquire periodic oscillations near resonance and construct a nonlinear-mode model. This model is based on amplitude-dependent modal properties, i.e. does not require nonlinear basis functions. The second methodology exploits uncontrolled experiments with broadband random inputs to build polynomial nonlinear state-space models using advanced system identification tools. The methods are applied to two experimental test rigs, a magnetic cantilever beam and a free-free beam with a lap joint. The respective models of both methods and both specimens are then challenged to predict dynamic, near-resonant behavior observed under different sine and sine-sweep excitations. The vibration prediction of the nonlinear-mode and state-space models clearly highlight the capabilities and limitations of the models. The nonlinear-mode model, by design, yields a perfect match at resonance peaks and high accuracy in close vicinity. However, it is limited to well-spaced modes and sinusoidal excitation. The state-space model covers a wider dynamic range, including transient excitations. However, the real-life nonlinearities considered in this study can only be approximated by polynomial basis functions. Consequently, the identified state-space models are found to be highly input-dependent, in particular for sinusoidal excitations where they are found to lead to a low predictive capability.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.
-
Piecewise Digital Predistortion fo mmWave Active Antenna Arrays: Algorithms and Measurements
Authors:
Alberto Brihuega,
Mahmoud Abdelaziz,
Lauri Anttila,
Matias Turunen,
Markus Allén,
Thomas Eriksson,
Mikko Valkama
Abstract:
In this paper, we describe a novel framework for digital predistortion (DPD) based linearization of strongly nonlinear millimeter-wave active antenna arrays. Specifically, we formulate a piecewise (PW) closed-loop (CL) DPD solution and low-complexity gradient-adaptive parameter learning algorithms, together with a region partitioning method, that can efficiently handle deep compression of the PA u…
▽ More
In this paper, we describe a novel framework for digital predistortion (DPD) based linearization of strongly nonlinear millimeter-wave active antenna arrays. Specifically, we formulate a piecewise (PW) closed-loop (CL) DPD solution and low-complexity gradient-adaptive parameter learning algorithms, together with a region partitioning method, that can efficiently handle deep compression of the PA units. The impact of beamsteering on the DPD performance is studied, showing strong beam-dependence, thus necessitating frequent updating of the DPD. In order to facilitate fast adaptation, an inexpensive, non-iterative, pruning algorithm is introduced, which allows to significantly reduce the amount of model coefficients. The proposed methods are validated with extensive over-the-air RF measurements on a 64-element active antenna array transmitter operating at 28 GHz carrier frequency and transmitting a 400 MHz 5G New Radio (NR) standard-compliant orthogonal frequency division multiplexing waveform. The obtained results demonstrate the excellent linearization capabilities of the proposed solution, conforming to the new 5G NR requirements for frequency range 2 (FR2) in terms of both inband waveform quality and out-of-band emissions. The proposed PW-CL DPD is shown to outperform the state-of-the-art PW DPD based on the indirect learning architecture, as well as the classical single-polynomial based DPD solutions in terms of linearization performance and computational complexity by a clear margin.
△ Less
Submitted 30 April, 2020; v1 submitted 13 March, 2020;
originally announced March 2020.
-
Gradient-Adaptive Spline-Interpolated LUT Methods for Low-Complexity Digital Predistortion
Authors:
Pablo Pascual Campo,
Alberto Brihuega,
Lauri Anttila,
Matias Turunen,
Dani Korpi,
Markus Allén,
Mikko Valkama
Abstract:
In this paper, new digital predistortion (DPD) solutions for power amplifier (PA) linearization are proposed, with particular emphasis on reduced processing complexity in future 5G and beyond wideband radio systems. The first proposed method, referred to as the spline-based Hammerstein (SPH) approach, builds on complex spline-interpolated lookup table (LUT) followed by a linear finite impulse resp…
▽ More
In this paper, new digital predistortion (DPD) solutions for power amplifier (PA) linearization are proposed, with particular emphasis on reduced processing complexity in future 5G and beyond wideband radio systems. The first proposed method, referred to as the spline-based Hammerstein (SPH) approach, builds on complex spline-interpolated lookup table (LUT) followed by a linear finite impulse response (FIR) filter. The second proposed method, the spline-based memory polynomial (SMP) approach, contains multiple parallel complex spline-interpolated LUTs together with an input delay line such that more versatile memory modeling can be achieved. For both structures, gradient-based learning algorithms are derived to efficiently estimate the LUT control points and other related DPD parameters. Large set of experimental results are provided, with specific focus on 5G New Radio (NR) systems, showing successful linearization of multiple sub-6 GHz PA samples as well as a 28 GHz active antenna array, incorporating channel bandwidths up to 200 MHz. Explicit performance-complexity comparisons are also reported between the SPH and SMP DPD systems and the widely-applied ordinary memory-polynomial (MP) DPD solution. The results show that the linearization capabilities of the proposed methods are very close to that of the ordinary MP DPD, particularly with the proposed SMP approach, while having substantially lower processing complexity.
△ Less
Submitted 2 July, 2020; v1 submitted 4 July, 2019;
originally announced July 2019.
-
Earthquake Early Warning and Beyond: Systems Challenges in Smartphone-based Seismic Network
Authors:
Qingkai Kong,
Qin Lv,
Richard M. Allen
Abstract:
Earthquake Early Warning (EEW) systems can effectively reduce fatalities, injuries, and damages caused by earthquakes. Current EEW systems are mostly based on traditional seismic and geodetic networks, and exist only in a few countries due to the high cost of installing and maintaining such systems. The MyShake system takes a different approach and turns people's smartphones into portable seismic…
▽ More
Earthquake Early Warning (EEW) systems can effectively reduce fatalities, injuries, and damages caused by earthquakes. Current EEW systems are mostly based on traditional seismic and geodetic networks, and exist only in a few countries due to the high cost of installing and maintaining such systems. The MyShake system takes a different approach and turns people's smartphones into portable seismic sensors to detect earthquake-like motions. However, to issue EEW messages with high accuracy and low latency in the real world, we need to address a number of challenges related to mobile computing. In this paper, we first summarize our experience building and deploying the MyShake system, then focus on two key challenges for smartphone-based EEW (sensing heterogeneity and user/system dynamics) and some preliminary exploration. We also discuss other challenges and new research directions associated with smartphone-based seismic network.
△ Less
Submitted 19 January, 2019;
originally announced January 2019.