-
Pilot-Based SFO Estimation for Bistatic Integrated Sensing and Communication
Authors:
Lucas Giroto de Oliveira,
Yueheng Li,
Silvio Mandelli,
David Brunner,
Marcus Henninger,
Xiang Wan,
Tie Jun Cui,
Thomas Zwick,
Benjamin Nuss
Abstract:
Enabling bistatic radar sensing within the context of integrated sensing and communication (ISAC) for future sixth generation mobile networks demands strict synchronization accuracy, which is particularly challenging to be achieved with over-the-air synchronization. Existing algorithms handle time and frequency offsets adequately, but provide insufficiently accurate sampling frequency offset (SFO)…
▽ More
Enabling bistatic radar sensing within the context of integrated sensing and communication (ISAC) for future sixth generation mobile networks demands strict synchronization accuracy, which is particularly challenging to be achieved with over-the-air synchronization. Existing algorithms handle time and frequency offsets adequately, but provide insufficiently accurate sampling frequency offset (SFO) estimates that result in degradation of obtained radar images in the form of signal-to-noise ratio loss and migration of range and Doppler shift. This article introduces an SFO estimation algorithm named tilt inference of time offset (TITO) for orthogonal frequency-division multiplexing (OFDM)-based ISAC. Using available pilot subcarriers, TITO obtains channel impulse response estimates and extracts information on the SFO-induced delay migration to a dominant reference path with constant range, Doppler shift, and angle between transmit and receive ISAC nodes. TITO then adaptively selects the delay estimates that are only negligibly impaired by SFO-induced intersymbol interference, ultimately employing them to estimate the SFO. Assuming a scenario without a direct line-of-sight (LoS) between the aforementioned transmitting and receiving ISAC nodes, a system concept with a relay reflective intelligent surface (RIS) is used to create the aforementioned reference path is proposed. Besides a mathematical derivation of accuracy bounds, simulation and measurements at 26.2 GHz are presented to demonstrate TITO's superiority over existing methods in terms of SFO estimation accuracy and robustness.
△ Less
Submitted 10 July, 2024;
originally announced July 2024.
-
Feasibility of Non-Line-of-Sight Integrated Sensing and Communication at mmWave
Authors:
Paolo Tosi,
Marcus Henninger,
Lucas Giroto de Oliveira,
Silvio Mandelli
Abstract:
One rarely addressed direction in the context of Integrated Sensing and Communication (ISAC) is non-line-of-sight (NLOS) sensing, with the potential to enable use cases like intrusion detection and to increase the value that wireless networks can bring. However, ISAC networks impose challenges for sensing due to their communication-oriented design. For instance, time division duplex transmission c…
▽ More
One rarely addressed direction in the context of Integrated Sensing and Communication (ISAC) is non-line-of-sight (NLOS) sensing, with the potential to enable use cases like intrusion detection and to increase the value that wireless networks can bring. However, ISAC networks impose challenges for sensing due to their communication-oriented design. For instance, time division duplex transmission creates spectral holes in time, resulting in spectral replicas in the radar image. To counteract this, we evaluate different channel state information processing strategies and discuss their tradeoffs. We further propose an ensemble of techniques to detect targets in NLOS conditions. Our approaches are validated with experiments using a millimeter wave ISAC proof of concept in a factory-like environment. The results show that target detection in NLOS is generally possible with ISAC.
△ Less
Submitted 31 July, 2024; v1 submitted 18 June, 2024;
originally announced June 2024.
-
Bistatic OFDM-based ISAC with Over-the-Air Synchronization: System Concept and Performance Analysis
Authors:
David Brunner,
Lucas Giroto de Oliveira,
Charlotte Muth,
Silvio Mandelli,
Marcus Henninger,
Axel Diewald,
Yueheng Li,
Mohamad Basim Alabd,
Laurent Schmalen,
Thomas Zwick,
Benjamin Nuss
Abstract:
Integrated sensing and communication (ISAC) has been defined as one goal for 6G mobile communication systems. In this context, this article introduces a bistatic ISAC system based on orthogonal frequency-division multiplexing (OFDM). While the bistatic architecture brings advantages such as not demanding full duplex operation with respect to the monostatic one, the need for synchronizing transmitt…
▽ More
Integrated sensing and communication (ISAC) has been defined as one goal for 6G mobile communication systems. In this context, this article introduces a bistatic ISAC system based on orthogonal frequency-division multiplexing (OFDM). While the bistatic architecture brings advantages such as not demanding full duplex operation with respect to the monostatic one, the need for synchronizing transmitter and receiver is imposed. In this context, this article introuces a bistatic ISAC signal processing framework where an incoming OFDM-based ISAC signal undergoes over-the-air synchronization based on preamble symbols and pilots. Afterwards, bistatic radar processing is performed using either only pilot subcarriers or the full OFDM frame. The latter approach requires estimation of the originally transmitted frame based on communication processing and therefore error-free communication, which can be achieved via appropriate channel coding. The performance and limitations of the introduced system based on both aforementioned approaches are assessed via an analysis of the impact of residual synchronization mismatches and data decoding failures on both communication and radar performances. Finally, the performed analyses are validated by proof-of-concept measurement results.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
GAN-based Massive MIMO Channel Model Trained on Measured Data
Authors:
Florian Euchner,
Janina Sanzi,
Marcus Henninger,
Stephan ten Brink
Abstract:
Wireless channel models are a commonly used tool for the development of wireless telecommunication systems and standards. The currently prevailing geometry-based stochastic channel models (GSCMs) were manually specified for certain environments in a manual process requiring extensive domain knowledge, on the basis of channel measurement campaigns. By taking into account the stochastic distribution…
▽ More
Wireless channel models are a commonly used tool for the development of wireless telecommunication systems and standards. The currently prevailing geometry-based stochastic channel models (GSCMs) were manually specified for certain environments in a manual process requiring extensive domain knowledge, on the basis of channel measurement campaigns. By taking into account the stochastic distribution of certain channel properties like Rician k-factor, path loss or delay spread, they model the distribution of channel realizations. Instead of this manual process, a generative machine learning model like a generative adversarial network (GAN) may be used to automatically learn the distribution of channel statistics. Subsequently, the GAN's generator may be viewed as a channel model that can replace conventional stochastic or raytracer-based models. We propose a GAN architecture for a massive MIMO channel model, and train it on measurement data produced by a distributed massive MIMO channel sounder.
△ Less
Submitted 8 March, 2024;
originally announced March 2024.
-
Antenna Array Design for Mono-Static ISAC
Authors:
Alexander Felix,
Silvio Mandelli,
Marcus Henninger,
Stephan ten Brink
Abstract:
Mono-static sensing operations in ISAC perform joint beamforming between transmitter and receiver. However, in contrast to pure radar systems, ISAC requires to fulfill communications tasks and to retain the corresponding design constraints for at least one half-duplex antenna array. This shifts the available degrees of freedom to the design of the second half-duplex array, that completes the mono-…
▽ More
Mono-static sensing operations in ISAC perform joint beamforming between transmitter and receiver. However, in contrast to pure radar systems, ISAC requires to fulfill communications tasks and to retain the corresponding design constraints for at least one half-duplex antenna array. This shifts the available degrees of freedom to the design of the second half-duplex array, that completes the mono-static sensing setup of the 6G ISAC system. Consequently, although it is still possible to achieve the gains foreseen by the radar sparse array literature, it is necessary to adapt these considerations to the new ISAC paradigm.
In this work, we propose a model to evaluate the angular capabilities of a mono-static setup, constrained to the shape of the communications array and its topology requirements in wireless networks. Accordingly, we enhance the joint angular capabilities by utilizing a sparse element topology of the sensing array with the same number of elements. Our analysis is validated by simulation experiments, confirming the value of our model in providing system designers with a tool to drastically improve the trade-off between angular capabilities for sensing and the cost of the deployed hardware.
△ Less
Submitted 8 May, 2024; v1 submitted 19 February, 2024;
originally announced February 2024.
-
CRAP Part II: Clutter Removal with Continuous Acquisitions Under Phase Noise
Authors:
Marcus Henninger,
Silvio Mandelli,
Artjom Grudnitsky,
Stephan ten Brink
Abstract:
The mitigation of clutter is an important research branch in Integrated Sensing and Communication (ISAC), one of the emerging technologies of future cellular networks. In this work, we extend our previously introduced method Clutter Removal with Acquisitions Under Phase Noise (CRAP) by means to track clutter over time. This is necessary in scenarios that require high reliability but can change dyn…
▽ More
The mitigation of clutter is an important research branch in Integrated Sensing and Communication (ISAC), one of the emerging technologies of future cellular networks. In this work, we extend our previously introduced method Clutter Removal with Acquisitions Under Phase Noise (CRAP) by means to track clutter over time. This is necessary in scenarios that require high reliability but can change dynamically, like safety applications in factory floors. To that end, exponential smoothing is leveraged to process new measurements and previous clutter information in a unique matrix using the singular value decomposition, allowing adaptation to changing environments in an efficient way.We further propose a singular value threshold based on the Marchenko-Pastur distribution to select the meaningful clutter components. Results from both simulations and measurements show that continuously updating the clutter components with new acquisitions according to our proposed algorithm Smoothed CRAP (SCRAP) enables coping with dynamic clutter environments and facilitates the detection of sensing targets.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Multi-Target Localization in Multi-Static Integrated Sensing and Communication Deployments
Authors:
Maximilian Bauhofer,
Silvio Mandelli,
Marcus Henninger,
Thorsten Wild,
Stephan ten Brink
Abstract:
In future wireless communication networks, existing active localization will gradually evolve into more sophisticated (passive) sensing functionalities. One main enabler for this process is the merging of information collected from the network's nodes, sensing the environment in a multi-static deployment. The current literature considers single sensing node systems and/or single target scenarios,…
▽ More
In future wireless communication networks, existing active localization will gradually evolve into more sophisticated (passive) sensing functionalities. One main enabler for this process is the merging of information collected from the network's nodes, sensing the environment in a multi-static deployment. The current literature considers single sensing node systems and/or single target scenarios, mainly focusing on specific issues pertaining to hardware impairments or algorithmic challenges. In contrast, in this work we propose an ensemble of techniques for processing the information gathered from multiple sensing nodes, jointly observing an environment with multiple targets. A scattering model is used within a flexibly configurable framework to highlight the challenges and issues with algorithms used in this distributed sensing task. We validate our approach by supporting it with detailed link budget evaluations, considering practical millimeter-wave systems' capabilities. Our numerical evaluations are performed in an indoor scenario, sweeping a variety of parameter to analyze the KPIs sensitivity with respect to each of them. The proposed algorithms to fuse information by multiple nodes show significant gains in terms of targets' localization performance, with up to 35\% for the probability of detection, compared to the baseline with a mono-static setup.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
CRAP: Clutter Removal with Acquisitions Under Phase Noise
Authors:
Marcus Henninger,
Silvio Mandelli,
Artjom Grudnitsky,
Thorsten Wild,
Stephan ten Brink
Abstract:
The emergence of Integrated Sensing and Communication (ISAC) in future 6G networks comes with a variety of challenges to be solved. One of those is clutter removal, which should be applied to remove the influence of unwanted components, scattered by the environment, in the acquired sensing signal. While legacy radar systems already implement different clutter removal algorithms, ISAC requires tech…
▽ More
The emergence of Integrated Sensing and Communication (ISAC) in future 6G networks comes with a variety of challenges to be solved. One of those is clutter removal, which should be applied to remove the influence of unwanted components, scattered by the environment, in the acquired sensing signal. While legacy radar systems already implement different clutter removal algorithms, ISAC requires techniques that are tailored to the envisioned use cases and the specific challenges that communications deployments bring along, like phase noise due to clock errors between transmitter and receiver. To that end, in this work we introduce Clutter Removal with Acquisitions Under Phase Noise (CRAP). We propose to vectorize the time-frequency channel acquired in a radio frame in a high-dimensional space. In an offline clutter acquisition step, singular value decomposition is used to determine the major clutter components. At runtime, the clutter is then estimated and removed by a subspace projection of the acquired radio frame onto the clutter components.
Simulation results prove that CRAP offers benefits over prior art techniques robust to phase noise. In particular, our proposal does not suppress zero Doppler information, thereby enabling the detection of slow targets. Moreover, we show CRAP's real-time applicability in a millimeter-wave ISAC proof of concept, where a pedestrian is tracked in a cluttered lab environment.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Survey on Integrated Sensing and Communication Performance Modeling and Use Cases Feasibility
Authors:
Silvio Mandelli,
Marcus Henninger,
Maximilian Bauhofer,
Thorsten Wild
Abstract:
As the research community starts to address the* key features of 6G cellular standards, one of the agreed bridge topics to be studied already in 5G advanced releases is Integrated Sensing and Communication (ISAC). The first efforts of the research community are focusing on ISAC enablers, fundamental limits, and first demonstrators, that show that the time has come for the deployment of sensing fun…
▽ More
As the research community starts to address the* key features of 6G cellular standards, one of the agreed bridge topics to be studied already in 5G advanced releases is Integrated Sensing and Communication (ISAC). The first efforts of the research community are focusing on ISAC enablers, fundamental limits, and first demonstrators, that show that the time has come for the deployment of sensing functionalities in cellular standards. This survey paper takes a needed step towards ISAC deployment, providing an analytical toolkit to model cellular systems' sensing performance, accounting for both their fundamental and practical constraints. We then elaborate on the likely features of 6G systems to provide the feasible sensing key performance indicators (KPIs) in the frequency ranges spanned by cellular networks, including the potential new bands available in 6G, the Frequency Range 3 (FR3). We further validate our framework by visually investigating ISAC constraints with simulation examples. Finally, we assess the feasibility of few selected scenarios that can be enabled by ISAC, highlighting in each of them the limiting factor and, thus, which gaps should be filled by the research and standardization communities in the next years.
△ Less
Submitted 15 June, 2023; v1 submitted 11 May, 2023;
originally announced May 2023.
-
6G Integrated Sensing and Communication: From Vision to Realization
Authors:
Thorsten Wild,
Artjom Grudnitsky,
Silvio Mandelli,
Marcus Henninger,
Junqing Guan,
Frank Schaich
Abstract:
Integrated sensing and communications (ISAC) will be deployed into cellular communication systems possibly already with 5G-A and surely in 6G. This paper discusses ISAC use cases, key technology building blocks for system design with solutions and open research questions. Furthermore, we introduce our proof-of-concept (PoC) based on commercially available 5G communications hardware at mm-Wave freq…
▽ More
Integrated sensing and communications (ISAC) will be deployed into cellular communication systems possibly already with 5G-A and surely in 6G. This paper discusses ISAC use cases, key technology building blocks for system design with solutions and open research questions. Furthermore, we introduce our proof-of-concept (PoC) based on commercially available 5G communications hardware at mm-Wave frequencies, with sensing-specific algorithmic extensions. This new ISAC PoC can perform jointly high data-rate communications and OFDM radar sensing in the same frequency band. Initial pedestrian detection results are shown, indicating the practicability of ISAC in future cellular networks. The results also indicate our achievable sensing range and provide hints to the achievable range estimation accuracy, based on the stability of the PoC system communications hardware.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Probabilistic 5G Indoor Positioning Proof of Concept with Outlier Rejection
Authors:
Marcus Henninger,
Traian E. Abrudan,
Silvio Mandelli,
Maximilian Arnold,
Stephan Saur,
Veli-Matti Kolmonen,
Siegfried Klein,
Thomas Schlitter,
Stephan ten Brink
Abstract:
The continuously increasing bandwidth and antenna aperture available in wireless networks laid the foundation for developing competitive positioning solutions relying on communications standards and hardware. However, poor propagation conditions such as non-line of sight (NLOS) and rich multipath still pose many challenges due to outlier measurements that significantly degrade the positioning perf…
▽ More
The continuously increasing bandwidth and antenna aperture available in wireless networks laid the foundation for developing competitive positioning solutions relying on communications standards and hardware. However, poor propagation conditions such as non-line of sight (NLOS) and rich multipath still pose many challenges due to outlier measurements that significantly degrade the positioning performance. In this work, we introduce an iterative positioning method that reweights the time of arrival (ToA) and angle of arrival (AoA) measurements originating from multiple locators in order to efficiently remove outliers. In contrast to existing approaches that typically rely on a single locator to set the time reference for the time difference of arrival (TDoA) measurements corresponding to the remaining locators, and whose measurements may be unreliable, the proposed iterative approach does not rely on a reference locator only. The resulting robust position estimate is then used to initialize a computationally efficient gradient search to perform maximum likelihood position estimation. Our proposal is validated with an experimental setup at 3.75 GHz with 5G numerology in an indoor factory scenario, achieving an error of less than 50 cm in 95% of the measurements. To the best of our knowledge, this paper describes the first proof of concept for 5G-based joint ToA and AoA localization.
△ Less
Submitted 18 July, 2022;
originally announced July 2022.
-
Sampling and Reconstructing Angular Domains with Uniform Arrays
Authors:
Silvio Mandelli,
Marcus Henninger,
Jinfeng Du
Abstract:
The surge of massive antenna arrays in wireless networks calls for the adoption of analog/hybrid array solutions, where multiple antenna elements are driven by a common radio front end to form a beam along a specific angle in order to maximize the beamforming gain. Many heuristics have been proposed to sample the angular domain by trading off between sampling step size and overhead, where arbitrar…
▽ More
The surge of massive antenna arrays in wireless networks calls for the adoption of analog/hybrid array solutions, where multiple antenna elements are driven by a common radio front end to form a beam along a specific angle in order to maximize the beamforming gain. Many heuristics have been proposed to sample the angular domain by trading off between sampling step size and overhead, where arbitrarily small angular step size is only attainable with infinite sampling overhead. We show that, for uniform linear and rectangular arrays, lossless reconstruction of the array's angular responses at arbitrary angular precision is possible using a finite number of samples without resorting to assumptions of angular sparsity. The proposed method, sampling and reconstructing angular domain (SARA), defines how many and which angles to be sampled and the corresponding reconstruction. This general solution to scan the angular domain can therefore be applied not only to beam acquisition and channel estimation, but also to radio imaging techniques, making it a candidate for future integrated sensing and communications (ISAC). Extensive simulation results for target detection and radio imaging have demonstrated clear advantages of SARA versus other considered baselines, both in terms of angular reconstruction performance and computational complexity.
△ Less
Submitted 3 July, 2023; v1 submitted 17 February, 2022;
originally announced February 2022.
-
A Computationally Efficient 2D MUSIC Approach for 5G and 6G Sensing Networks
Authors:
Marcus Henninger,
Silvio Mandelli,
Maximilian Arnold,
Stephan ten Brink
Abstract:
Future cellular networks are intended to have the ability to sense the environment by utilizing reflections of transmitted signals. Multi-dimensional sensing brings along the crucial advantage of being able to resort to multiple domains to resolve targets, enhancing detection capabilities compared to 1D estimation. However, estimating parameters jointly in 5G New Radio (NR) systems poses the chall…
▽ More
Future cellular networks are intended to have the ability to sense the environment by utilizing reflections of transmitted signals. Multi-dimensional sensing brings along the crucial advantage of being able to resort to multiple domains to resolve targets, enhancing detection capabilities compared to 1D estimation. However, estimating parameters jointly in 5G New Radio (NR) systems poses the challenge of limiting the computational complexity while preserving a high resolution. To that end, we make us of channel state information (CSI) decimation for MUltiple SIgnal Classification (MUSIC)-based joint range-angle of arrival (AoA) estimation. We further introduce multi-peak search routines to achieve additional detection capability improvements. Simulation results with orthogonal frequency-division multiplexing (OFDM) signals show that we attain higher detection probabilities for closely spaced targets than with 1D range-only estimation. Moreover, we demonstrate that for our considered 5G setup, we are able to significantly reduce the required number of computations due to CSI decimation.
△ Less
Submitted 20 May, 2022; v1 submitted 30 April, 2021;
originally announced April 2021.
-
WGAN-based Autoencoder Training Over-the-air
Authors:
Sebastian Dörner,
Marcus Henninger,
Sebastian Cammerer,
Stephan ten Brink
Abstract:
The practical realization of end-to-end training of communication systems is fundamentally limited by its accessibility of the channel gradient. To overcome this major burden, the idea of generative adversarial networks (GANs) that learn to mimic the actual channel behavior has been recently proposed in the literature. Contrarily to handcrafted classical channel modeling, which can never fully cap…
▽ More
The practical realization of end-to-end training of communication systems is fundamentally limited by its accessibility of the channel gradient. To overcome this major burden, the idea of generative adversarial networks (GANs) that learn to mimic the actual channel behavior has been recently proposed in the literature. Contrarily to handcrafted classical channel modeling, which can never fully capture the real world, GANs promise, in principle, the ability to learn any physical impairment, enabled by the data-driven learning algorithm. In this work, we verify the concept of GAN-based autoencoder training in actual over-the-air (OTA) measurements. To improve training stability, we first extend the concept to conditional Wasserstein GANs and embed it into a state-of-the-art autoencoder-architecture, including bitwise estimates and an outer channel code. Further, in the same framework, we compare the existing three different training approaches: model-based pre-training with receiver finetuning, reinforcement learning (RL) and GAN-based channel modeling. For this, we show advantages and limitations of GAN-based end-to-end training. In particular, for non-linear effects, it turns out that learning the whole exploration space becomes prohibitively complex. Finally, we show that the training strategy benefits from a simpler (training) data acquisition when compared to RL-based training, which requires continuous transmitter weight updates. This becomes an important practical bottleneck due to limited bandwidth and latency between transmitter and training algorithm that may even operate at physically different locations.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.