-
arXiv:2312.11248
[pdf]
quant-ph
cond-mat.mes-hall
cond-mat.str-el
cond-mat.supr-con
physics.app-ph
Quantized conductance in split gate superconducting quantum point contacts with InGaAs semiconducting two-dimensional electron systems
Authors:
Kaveh Delfanazari,
Jiahui Li,
Yusheng Xiong,
Pengcheng Ma,
Reuben K. Puddy,
Teng Yi,
Ian Farrer,
Sachio Komori,
Jason W. A. Robinson,
Llorenc Serra,
David A. Ritchie,
Michael J. Kelly,
Hannah J. Joyce,
Charles G. Smith
Abstract:
Quantum point contact or QPC -- a constriction in a semiconducting two-dimensional (2D) electron system with a quantized conductance -- has been found as the building block of novel spintronic, and topological electronic circuits. They can also be used as readout electronic, charge sensor or switch in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a C…
▽ More
Quantum point contact or QPC -- a constriction in a semiconducting two-dimensional (2D) electron system with a quantized conductance -- has been found as the building block of novel spintronic, and topological electronic circuits. They can also be used as readout electronic, charge sensor or switch in quantum nanocircuits. A short and impurity-free constriction with superconducting contacts is a Cooper pairs QPC analogue known as superconducting quantum point contact (SQPC). The technological development of such quantum devices has been prolonged due to the challenges of maintaining their geometrical requirement and near-unity superconductor-semiconductor interface transparency. Here, we develop advanced nanofabrication, material and device engineering techniques and report on an innovative realisation of nanoscale SQPC arrays with split gate technology in semiconducting 2D electron systems, exploiting the special gate tunability of the quantum wells, and report the first experimental observation of conductance quantization in hybrid InGaAs-Nb SQPCs. We observe reproducible quantized conductance at zero magnetic fields in multiple quantum nanodevices fabricated in a single chip and systematically investigate the quantum transport of SQPCs at low and high magnetic fields for their potential applications in quantum metrology, for extremely accurate voltage standards, and fault-tolerant quantum technologies.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments
Authors:
J. Balibrea Correa,
J. Lerendegui-Marco,
V. Babiano-Suarez,
C. Domingo-Pardo,
I. Ladarescu,
A. Tarifeño-Saldivia,
V. Alcayne,
D. Cano-Ott,
E. González-Romero,
T. Martínez,
E. Mendoza,
A. Pérez de Rada,
J. Plaza del Olmo,
A. Sánchez-Caballero,
A. Casanovas,
F. Calviño,
S. Valenta,
O. Aberle,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
M. Bacak,
C. Beltrami,
S. Bennett,
A. P. Bernardes
, et al. (109 additional authors not shown)
Abstract:
One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects…
▽ More
One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Characterisation of the Temperature-dependent Dark Rate of Hamamatsu R7081-100 10" Photomultiplier Tubes
Authors:
Steve T. Wilson,
Samuel Fargher,
Robert J. Foster,
Matthew Malek,
Matthew Needham,
Andrew Scarff,
Gary D. Smith
Abstract:
Dark noise is a dominant background in photomultiplier tubes (PMTs), which are commonly used in liquid-filled particle detectors for single-photon detection to see the results of particle interactions. A major contribution to dark noise is thermionic emission from the photocathode. The dark noise of Hamamatsu R7081-100 PMTs is characterised in a temperature and purity controlled water tank, with t…
▽ More
Dark noise is a dominant background in photomultiplier tubes (PMTs), which are commonly used in liquid-filled particle detectors for single-photon detection to see the results of particle interactions. A major contribution to dark noise is thermionic emission from the photocathode. The dark noise of Hamamatsu R7081-100 PMTs is characterised in a temperature and purity controlled water tank, with the thermionic emission contribution isolated. The results suggest that the intrinsic dark rate of PMTs does not depend on the medium, but does follow Richardson's law of thermionic emission. There are external contributions to the overall observed PMT count rate identified, but the intrinsic PMT dark rate in water matches that measured in air.
△ Less
Submitted 27 November, 2023; v1 submitted 19 June, 2023;
originally announced June 2023.
-
Acceptance tests of Hamamatsu R7081 photomultiplier tubes
Authors:
O. A. Akindele,
A. Bernstein,
S. Boyd,
J. Burns,
M. Calle,
J. Coleman,
R. Collins,
A. Ezeribe,
J. He,
G. Holt,
K. Jewkes,
R. Jones,
L. Kneale,
P. Lewis,
M. Malek,
C. Mauger,
A. Mitra,
F. Muheim,
M. Needham,
S. Paling,
L. Pickard,
S. Quillin,
J. Rex,
P. R. Scovell,
T. Shaw
, et al. (7 additional authors not shown)
Abstract:
Photomultiplier tubes (PMTs) are traditionally an integral part of large underground experiments as they measure the light emission from particle interactions within the enclosed detection media. The BUTTON experiment will utilise around 100 PMTs to measure the response of different media suitable for rare event searches. A subset of low-radioactivity 10-inch Hamamatsu R7081 PMTs were tested, char…
▽ More
Photomultiplier tubes (PMTs) are traditionally an integral part of large underground experiments as they measure the light emission from particle interactions within the enclosed detection media. The BUTTON experiment will utilise around 100 PMTs to measure the response of different media suitable for rare event searches. A subset of low-radioactivity 10-inch Hamamatsu R7081 PMTs were tested, characterised, and compared to manufacture certification. This manuscript describes the laboratory tests and analysis of gain, peak-to-valley ratio and dark rate of the PMTs to give an understanding of the charge response, signal-to-noise ratio and dark noise background as an acceptance test of the suitability of these PMTs for water-based detectors. Following the evaluation of these tests, the PMT performance agreed with the manufacturer specifications. These results are imperative for modeling the PMT response in detector simulations and providing confidence in the performance of the devices once installed in the detector underground.
△ Less
Submitted 27 July, 2023; v1 submitted 16 June, 2023;
originally announced June 2023.
-
Electronic specific heat capacities and entropies from density matrix quantum Monte Carlo using Gaussian process regression to find gradients of noisy data
Authors:
William Z. Van Benschoten,
Laura Weiler,
Gabriel J. Smith,
Songhang Man,
Taylor DeMello,
James J. Shepherd
Abstract:
We present a machine learning approach to calculating electronic specific heat capacities for a variety of benchmark molecular systems. Our models are based on data from density matrix quantum Monte Carlo, which is a stochastic method that can calculate the electronic energy at finite temperature. As these energies typically have noise, numerical derivatives of the energy can be challenging to fin…
▽ More
We present a machine learning approach to calculating electronic specific heat capacities for a variety of benchmark molecular systems. Our models are based on data from density matrix quantum Monte Carlo, which is a stochastic method that can calculate the electronic energy at finite temperature. As these energies typically have noise, numerical derivatives of the energy can be challenging to find reliably. In order to circumvent this problem, we use Gaussian process regression to model the energy and use analytical derivatives to produce the specific heat capacity. From there, we also calculate the entropy by numerical integration. We compare our results to cubic splines and finite differences in a variety of molecules whose Hamiltonians can be diagonalized exactly with full configuration interaction. We finally apply this method to look at larger molecules where exact diagonalization is not possible and make comparisons with more approximate ways to calculate the specific heat capacity and entropy.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
The role of elastic instability on the self-assembly of particle chains in simple shear flow
Authors:
Matthew G. Smith,
Graham M. Gibson,
Andreas Link,
Anand Raghavan,
Andrew Clarke,
Thomas Franke,
Manlio Tassieri
Abstract:
Flow-Induced Self-Assembly (FISA) is the phenomena of particle chaining in viscoelastic fluids while experiencing shear flow. FISA has a large number of applications across many fields including material science, food processing and biomedical engineering. Nonetheless, this phenomena is currently not fully understood and little has been done in literature so far to investigate the possible effects…
▽ More
Flow-Induced Self-Assembly (FISA) is the phenomena of particle chaining in viscoelastic fluids while experiencing shear flow. FISA has a large number of applications across many fields including material science, food processing and biomedical engineering. Nonetheless, this phenomena is currently not fully understood and little has been done in literature so far to investigate the possible effects of the shear-induced elastic instability. In this work, a bespoke cone and plate shear cell is used to provide new insights on the FISA dynamics. In particular, we have fine tuned the applied shear rates to investigate the chaining phenomenon of micron-sized spherical particles suspended into a viscoelastic fluid characterised by a distinct onset of elastic instability. This has allowed us to reveal three phenomena never reported in literature before, i.e.: (I) the onset of the elastic instability is strongly correlated with an enhancement of FISA; (II) particle chains break apart when a constant shear is applied for `sufficiently' long-time (i.e. much longer than the fluids' longest relaxation time). This latter point correlates well with the outcomes of parallel superposition shear measurements, which (III) reveal a fading of the elastic component of the suspending fluid during continuous shear flows.
△ Less
Submitted 8 December, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
The Qweak High Performance LH2 Target
Authors:
J. Brock,
S. Covrig Dusa,
J. Dunne,
C. Keith,
D. Meekins,
J. Pierce,
G. R. Smith,
A. Subedi
Abstract:
A high-power liquid hydrogen target was built for the Jefferson Lab Qweak experiment, which measured the tiny parity-violating asymmetry in $\vec{e}$p scattering at an incident energy of 1.16 GeV, and a Q$^2 = 0.025$ GeV$^{2}$. To achieve the luminosity of $1.7 \times 10^{39}$ cm$^{-2}$ s$^{-1}$, a 34.5 cm-long target was used with a beam current of 180 $μ$A. The ionization energy-loss deposited b…
▽ More
A high-power liquid hydrogen target was built for the Jefferson Lab Qweak experiment, which measured the tiny parity-violating asymmetry in $\vec{e}$p scattering at an incident energy of 1.16 GeV, and a Q$^2 = 0.025$ GeV$^{2}$. To achieve the luminosity of $1.7 \times 10^{39}$ cm$^{-2}$ s$^{-1}$, a 34.5 cm-long target was used with a beam current of 180 $μ$A. The ionization energy-loss deposited by the beam in the target was 2.1 kW. The target temperature was controlled to within $\pm$0.02 K and the target noise (density fluctuations) near the experiment's beam helicity-reversal rate of 960 Hz was only 53 ppm. The 58 liquid liter target achieved a head of 11.4 m (7.6 kPa) and a mass flow of 1.2 $\pm$ 0.3 kg/s (corresponding to a volume flow of 17.4 $\pm$ 3.8 l/s) at the nominal 29 Hz rotation frequency of the recirculating centrifugal pump. We describe aspects of the design, operation, and performance of this target, the highest power LH2 target ever used in an electron scattering experiment to date.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
The human factor: results of a small-angle scattering data analysis Round Robin
Authors:
Brian R. Pauw,
Glen J. Smales,
Andy S. Anker,
Daniel M. Balazs,
Frederick L. Beyer,
Ralf Bienert,
Wim G. Bouwman,
Ingo Breßler,
Joachim Breternitz,
Erik S Brok,
Gary Bryant,
Andrew J. Clulow,
Erin R. Crater,
Frédéric De Geuser,
Alessandra Del Giudice,
Jérôme Deumer,
Sabrina Disch,
Shankar Dutt,
Kilian Frank,
Emiliano Fratini,
Elliot P. Gilbert,
Marc Benjamin Hahn,
James Hallett,
Max Hohenschutz,
Martin Hollamby
, et al. (24 additional authors not shown)
Abstract:
A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of pop…
▽ More
A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of populations in the dilute dispersions, with half of the population mean entries within 1.5% and half of the population width entries within 40%, respectively. Due to the added complexity of the structure factor, much fewer people submitted answers on the powder datasets. For those that did, half of the entries for the means and widths were within 44% and 86% respectively. This Round Robin experiment highlights several causes for the discrepancies, for which solutions are proposed.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Phenomenological analysis of simple ion channel block in large populations of uncoupled cardiomyocytes
Authors:
Radostin D. Simitev,
Antesar Al Dawoud,
Muhamad H. N. Aziz,
Rachel Myles,
Godfrey L. Smith
Abstract:
Current understanding of arrhythmia mechanisms and design of anti-arrhythmic drug therapies hinges on the assumption that myocytes from the same region of a single heart have similar, if not identical, action potential waveforms and drug responses. On the contrary, recent experiments reveal significant heterogeneity in uncoupled healthy myocytes both from different hearts as well as from identical…
▽ More
Current understanding of arrhythmia mechanisms and design of anti-arrhythmic drug therapies hinges on the assumption that myocytes from the same region of a single heart have similar, if not identical, action potential waveforms and drug responses. On the contrary, recent experiments reveal significant heterogeneity in uncoupled healthy myocytes both from different hearts as well as from identical regions within a single heart. In this work, a methodology is developed for quantifying the individual electrophysiological properties of large numbers of uncoupled cardiomyocytes under ion channel block in terms of the parameters values of a conceptual fast-slow model of electrical excitability. The approach is applied to a population of nearly 500 rabbit ventricular myocytes for which action potential duration (APD) before and after the application of the drug nifedipine was experimentally measured (Lachaud et al., 2022, Cardiovasc. Res.). To this end, drug action is represented by a multiplicative factor to an effective ion conductance, a closed form asymptotic expression for APD is derived and inverted to determine model parameters as functions of APD and dAPD (drug-induced change in APD) for each myocyte. Two free protocol-related quantities are calibrated to experiment using an adaptive-domain procedure based on an original assumption of optimal excitability. The explicit APD expression and the resulting set of model parameter values allow (a) direct evaluation of conditions necessary to maintain fixed APD or dAPD, (b) predictions of the proportion of cells remaining excitable after drug application, (c) predictions of stimulus period dependency and (d) predictions of dose-response curves, the latter being in agreement with additional experimental data.
△ Less
Submitted 17 January, 2023;
originally announced January 2023.
-
Nusselt number scaling in horizontal convection
Authors:
Navid C. Constantinou,
Cesar B. Rocha,
Stefan G. Llewellyn Smith,
William R. Young
Abstract:
We report a numerical study of horizontal convection (HC) at Prandtl number $Pr = 1$, with both no-slip and free-slip boundary conditions. We obtain 2D and 3D solutions and determine the relation between the Rayleigh number $Ra$ and the Nusselt number $Nu$. In 2D we vary $Ra$ between $0$ and $10^{14}$. In the range $10^6 \le Ra \le 10^{10}$ the $Nu$-$Ra$ relation is $Nu \sim Ra^{1/5}$. With $Ra$ g…
▽ More
We report a numerical study of horizontal convection (HC) at Prandtl number $Pr = 1$, with both no-slip and free-slip boundary conditions. We obtain 2D and 3D solutions and determine the relation between the Rayleigh number $Ra$ and the Nusselt number $Nu$. In 2D we vary $Ra$ between $0$ and $10^{14}$. In the range $10^6 \le Ra \le 10^{10}$ the $Nu$-$Ra$ relation is $Nu \sim Ra^{1/5}$. With $Ra$ greater than about $10^{11}$ we find a 2D regime with $Nu \sim Ra^{1/4}$ over three decades, up to the highest 2D $Ra$. In 3D, with maximum $Ra = 10^{11.5}$, we find only $Nu \sim Ra^{1/5}$. These results apply to both free slip and no slip boundary conditions. The $Nu \sim Ra^{1/4}$ regime has a double boundary layer (BL): there is a thin BL with thickness $\sim Ra^{-1/4}$ nested inside a thicker BL with thickness $\sim Ra^{-1/5}$. The $Ra^{-1/4}$ BL thickness, which determines $Nu$, coincides with the Kolmogorov and Batchelor scales of HC.
Numerical and theoretical results indicate that 3D HC is qualitatively and quantitatively similar to 2D HC. At the same $Ra$, the 3D $Nu$ exceeds the 2D $Nu$ by less than $20$%, i.e., there is very little 3D enhancement of heat transport. Boundary conditions are more important than dimensionality: the 2D free-slip solutions have larger $Nu$ than 3D no-slip solutions. Using the mechanical energy power integral of HC we show that the mean square vorticity of 3D HC is nearly equal to that of 2D HC at the same $Ra$. Thus vorticity amplification by strain-mediated vortex stretching does not operate in 3D HC.
△ Less
Submitted 7 June, 2023; v1 submitted 8 January, 2023;
originally announced January 2023.
-
Machine learning opens a doorway for microrheology with optical tweezers in living systems
Authors:
Matthew G. Smith,
Jack Radford,
Eky Febrianto,
Jorge Ramírez,
Helen O'Mahony,
Andrew B. Matheson,
Graham M. Gibson,
Daniele Faccio,
Manlio Tassieri
Abstract:
It has been argued [Tassieri, \textit{Soft Matter}, 2015, \textbf{11}, 5792] that linear microrheology with optical tweezers (MOT) of living systems ``\textit{is not an option}'', because of the wide gap between the observation time required to collect statistically valid data and the mutational times of the organisms under study. Here, we have taken a first step towards a possible solution of thi…
▽ More
It has been argued [Tassieri, \textit{Soft Matter}, 2015, \textbf{11}, 5792] that linear microrheology with optical tweezers (MOT) of living systems ``\textit{is not an option}'', because of the wide gap between the observation time required to collect statistically valid data and the mutational times of the organisms under study. Here, we have taken a first step towards a possible solution of this problem by exploiting modern machine learning (ML) methods to reduce the duration of MOT measurements from several tens of minutes down to one second. This has been achieved by focusing on the analysis of computer simulated trajectories of an optically trapped particle suspended in a set of Newtonian fluids having viscosity values spanning three orders of magnitude, i.e. from $10^{-3}$ to $1$ Pa$\cdot$s. When the particle trajectory is analysed by means of conventional statistical mechanics principles, we explicate for the first time in literature the relationship between the required duration of MOT experiments ($T_m$) and the fluids relative viscosity ($η_r$) to achieve an uncertainty as low as $1\%$; i.e., $T_m\cong 17η_r^3$ minutes. This has led to further evidences explaining why conventional MOT measurements commonly underestimate the materials' viscoelastic properties, especially in the case of high viscous fluids or soft-solids such as gels and cells. Finally, we have developed a ML algorithm to determine the viscosity of Newtonian fluids that uses feature extraction on raw trajectories acquired at a kHz and for a duration of only one second, yet capable of returning viscosity values carrying an error as low as $\sim0.3\%$ at best; hence the opening of a doorway for MOT in living systems.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
The CERN n TOF NEAR station for astrophysics- and application-related neutron activation measurements
Authors:
N. Patronis,
A. Mengoni,
N. Colonna,
M. Cecchetto,
C. Domingo-Pardo,
O. Aberle,
J. Lerendegui-Marco,
G. Gervino,
M. E. Stamati,
S. Goula,
A. P. Bernardes,
M. Mastromarco,
A. Manna,
R. Vlastou,
C. Massimi,
M. Calviani,
V. Alcayne,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
V. Babiano-Suarez,
M. Bacak,
J. Balibrea,
C. Beltrami,
S. Bennett
, et al. (108 additional authors not shown)
Abstract:
A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to th…
▽ More
A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to the NEAR station through a hole in the shielding wall of the target, inside which a collimator is inserted. The new area is complemented with a γ-ray spectroscopy laboratory, the GEAR station, equipped with a high efficiency HPGe detector, for the measurement of the activity resulting from irradiation of a sample in the NEAR station. The use of a moderator/filter assembly is envisaged, in order to produce a neutron beam of Maxwellian shape at different thermal energies, necessary for the measurement of Maxwellian Averaged Cross Sections of astrophysical interest. A new fast-cycling activation technique is also being investigated, for measurements of reactions leading to isotopes of very short half life.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Non-reciprocal emissivity, partial coherence, and amplification of internal energy from photon recycling when thermal radiation is sourced within matter
Authors:
Geoff B Smith,
Angus R Gentle,
Matthew D Arnold
Abstract:
Photons excited into ground state modes at finite temperature display partitioning among photon phases, lifetimes and distances travelled since creation. These distributions set the distance from an interface a created photon has some chance of emission. Excited photons at each frequency have a phase velocity set by each mode propagation index which determines mode density and internal energy cont…
▽ More
Photons excited into ground state modes at finite temperature display partitioning among photon phases, lifetimes and distances travelled since creation. These distributions set the distance from an interface a created photon has some chance of emission. Excited photons at each frequency have a phase velocity set by each mode propagation index which determines mode density and internal energy contribution. All photons emitted after striking an interface obliquely are refracted. Their exit intensities are then irreversible except when weak internal attenuation occurs. At low temperature attenuation index is small so reversibility is approximate. As temperature rises refraction direction varies. Total emission remains reversible after transitioning through a non equilibrium state with no other heat inputs. In equilibrium the densities of excitations that create and annihilate photons are in balance with photon densities while emissivity depends on both indices and internal incident direction. Modelled exit intensities from pure water and crystalline silica contain strong resonant intensities and match data accurately. Intrinsic resonances formed within liquids and compounds are due to photon modes hybridising with localized excitations, including molecular oscillations and the anharmonic component of lattice distortions. They explain the many resonant spectral intensities seen in remote sensing. Each hybrid oscillator is a photonic virtual bound state whose energy fluctuates between levels separated by mode energy. Refraction induces solid angle changes and often anomalous refraction while thermal recycling of internally reflected photons modifies intensities and internal energy. Enhanced internal heat flux from phonon drag by photon density gradients under an external temperature gradient is also predicted.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Opportunities and Limitations in Broadband Sensing
Authors:
Anthony M. Polloreno,
Jacob L. Beckey,
Joshua Levin,
Ariel Shlosberg,
James K. Thompson,
Michael Foss-Feig,
David Hayes,
Graeme Smith
Abstract:
We consider estimating the magnitude of a monochromatic AC signal that couples to a two-level sensor. For any detection protocol, the precision achieved depends on the signal's frequency and can be quantified by the quantum Fisher information. To study limitations in broadband sensing, we introduce the integrated quantum Fisher information and derive inequality bounds that embody fundamental trade…
▽ More
We consider estimating the magnitude of a monochromatic AC signal that couples to a two-level sensor. For any detection protocol, the precision achieved depends on the signal's frequency and can be quantified by the quantum Fisher information. To study limitations in broadband sensing, we introduce the integrated quantum Fisher information and derive inequality bounds that embody fundamental tradeoffs in any sensing protocol. These inequalities show that sensitivity in one frequency range must come at a cost of reduced sensitivity elsewhere. For many protocols, including those with small phase accumulation and those consisting of $π$-pulses, we find the integrated Fisher information scales linearly with $T$. We also find protocols with substantial phase accumulation can have integrated QFI that grows quadratically with $T$, which is optimal. These protocols may allow the very rapid detection of a signal with unknown frequency over a very wide bandwidth.
△ Less
Submitted 3 March, 2023; v1 submitted 10 March, 2022;
originally announced March 2022.
-
Extracting Quantitative Dielectric Properties from Pump-Probe Spectroscopy
Authors:
Arjun Ashoka,
Ronnie R. Tamming,
Aswathy V. Girija,
Hope Bretscher,
Sachin Dev Verma,
Shang-Da Yang,
Chih-Hsuan Lu,
Justin M. Hodgkiss,
David Ritchie,
Chong Chen,
Charles G. Smith,
Christoph Schnedermann,
Michael B. Price,
Kai Chen,
Akshay Rao
Abstract:
Optical pump-probe spectroscopy is a powerful tool for the study of non-equilibrium electronic dynamics and finds wide applications across a range of fields, from physics and chemistry to material science and biology. However, a shortcoming of conventional pump-probe spectroscopy is that photoinduced changes in transmission, reflection and scattering can simultaneously contribute to the measured d…
▽ More
Optical pump-probe spectroscopy is a powerful tool for the study of non-equilibrium electronic dynamics and finds wide applications across a range of fields, from physics and chemistry to material science and biology. However, a shortcoming of conventional pump-probe spectroscopy is that photoinduced changes in transmission, reflection and scattering can simultaneously contribute to the measured differential spectra, leading to ambiguities in assigning the origin of spectral signatures and ruling out quantitative interpretation of the spectra. Ideally, these methods would measure the underlying dielectric function (or the complex refractive index) which would then directly provide quantitative information on the transient excited state dynamics free of these ambiguities. Here we present and test a model independent route to transform differential transmission or reflection spectra, measured via conventional optical pump-probe spectroscopy, to changes in the quantitative transient dielectric function. We benchmark this method against changes in the real refractive index measured using time-resolved Frequency Domain Interferometry in prototypical inorganic and organic semiconductor films. Our methodology can be applied to existing and future pump-probe data sets, allowing for an unambiguous and quantitative characterisation of the transient photoexcited spectra of materials. This in turn will accelerate the adoption of pump-probe spectroscopy as a facile and robust materials characterisation and screening tool.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Surface production of negative ions from pulse-biased nitrogen doped diamond within a low-pressure deuterium plasma
Authors:
Gregory J. Smith,
Lenny Tahri,
Jocelyn Achard,
Riadh Issaoui,
Timo Gans,
James P. Dedrick,
Gilles Cartry
Abstract:
The production of negative ions is of significant interest for applications including mass spectrometry, materials surface processing, and neutral beam injection for magnetic confined fusion. Neutral beam injection sources maximise negative ion production through the use of surface production processes and low work function metals, which introduce complex engineering. Investigating materials and t…
▽ More
The production of negative ions is of significant interest for applications including mass spectrometry, materials surface processing, and neutral beam injection for magnetic confined fusion. Neutral beam injection sources maximise negative ion production through the use of surface production processes and low work function metals, which introduce complex engineering. Investigating materials and techniques to avoid the use of low work function metals is of interest to broaden the application of negative ion sources and simplify future devices. In this study, we use pulsed sample biasing to investigate the surface production of negative ions from nitrogen doped diamond. The use of a pulsed bias allows for the study of insulating samples in a preserved surface state at temperatures between 150$^{\circ}$C and 700$^{\circ}$C in a 2 Pa, 130 W, (n$_e$ $\sim$ $10^9$ cm$^{-3}$, T$_e$ $\sim$ 0.6 eV) inductively coupled deuterium plasma. The negative ion yield during the application of a pulsed negative bias is measured using a mass spectrometer and found to be approximately 20% higher for nitrogen doped diamond compared to non-doped diamond. It is also shown that the pulsed sample bias has a lower peak negative ion yield compared to a continuous sample bias, which suggests that the formation of an optimum ratio of defects on its surface can be favourable for negative ion production.
△ Less
Submitted 2 August, 2021;
originally announced August 2021.
-
The Stefan-Boltzmann constant re-visited for photons thermally generated within matter
Authors:
G. B. Smith,
A. R. Gentle,
M. D. Arnold
Abstract:
The Stefan-Boltzmann constant arose from photon densities inside a cavity, but inside matter photon mode densities are material specific. Photon speeds are governed by the mode they occupy, so mode densities can be expressed in terms of speed. Cavity intensities at temperature \(T_{K}\) combined \(\left[\frac {8πk^4}{c^3h^3}\right] T_{K }^4\) with \(({π^4}/{15})\). A material dependent number from…
▽ More
The Stefan-Boltzmann constant arose from photon densities inside a cavity, but inside matter photon mode densities are material specific. Photon speeds are governed by the mode they occupy, so mode densities can be expressed in terms of speed. Cavity intensities at temperature \(T_{K}\) combined \(\left[\frac {8πk^4}{c^3h^3}\right] T_{K }^4\) with \(({π^4}/{15})\). A material dependent number from summation of internal photon spectral energy densities replaces \(\frac {π^4}{15}\). Spectral densities are presented for water, germanium and silver. Output intensity combines revised hemispherical emittance \(ε_{Q,H}\) based on these densities, with universal factor \(\left[\frac {8πk^4}{c^3h^3}\right] T_{K }^4\). Emitted radiance after interface internal reflectance of directionally invariant internal radiance elements defines \(ε_{Q,H}\). Predicted internal densities are verifiable using measured external spectral intensities, provided refraction upon exit is accounted for in emissivity, which the Kirchhoff rule neglects. Virtual bound state photon resonances are predicted in dielectrics and observed.
△ Less
Submitted 20 July, 2021;
originally announced July 2021.
-
Active terahertz modulator and slow light metamaterial devices with hybrid graphene-superconductor photonic integrated circuits
Authors:
Samane Kalhor,
Stephan J. Kindness,
Robert Wallis,
Harvey E. Beere,
Majid Ghanaatshoar,
Riccardo Degl'Innocenti,
Michael J. Kelly,
Stephan Hofmann,
Charles G. Smith,
Hannah J. Joyce,
David A. Ritchie,
Kaveh Delfanazari
Abstract:
Metamaterial photonic integrated circuits with arrays of hybrid graphene-superconductor coupled split-ring resonators (SRR) capable of modulating and slowing down terahertz (THz) light are introduced and proposed. The hybrid device optical responses, such as electromagnetic induced transparency (EIT) and group delay, can be modulated in several ways. First, it is modulated electrically by changing…
▽ More
Metamaterial photonic integrated circuits with arrays of hybrid graphene-superconductor coupled split-ring resonators (SRR) capable of modulating and slowing down terahertz (THz) light are introduced and proposed. The hybrid device optical responses, such as electromagnetic induced transparency (EIT) and group delay, can be modulated in several ways. First, it is modulated electrically by changing the conductivity and carrier concentrations in graphene. Alternatively, the optical response can be modified by acting on the device temperature sensitivity, by switching Nb from a lossy normal phase to a low-loss quantum mechanical phase below the transition temperature (Tc) of Nb. Maximum modulation depths of 57.3 % and 97.61 % are achieved for EIT and group delay at the THz transmission window, respectively. A comparison is carried out between the Nb-graphene-Nb coupled SRR-based devices with those of Au-graphene-Au SRRs and a significant enhancement of the THz transmission, group delay, and EIT responses are observed when Nb is in the quantum mechanical phase. Such hybrid devices with their reasonably large and tunable slow light bandwidth pave the way for the realization of active optoelectronic modulators, filters, phase shifters, and slow light devices for applications in chip-scale quantum communication and quantum processing.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
OrbNet Denali: A machine learning potential for biological and organic chemistry with semi-empirical cost and DFT accuracy
Authors:
Anders S. Christensen,
Sai Krishna Sirumalla,
Zhuoran Qiao,
Michael B. O'Connor,
Daniel G. A. Smith,
Feizhi Ding,
Peter J. Bygrave,
Animashree Anandkumar,
Matthew Welborn,
Frederick R. Manby,
Thomas F. Miller III
Abstract:
We present OrbNet Denali, a machine learning model for electronic structure that is designed as a drop-in replacement for ground-state density functional theory (DFT) energy calculations. The model is a message-passing neural network that uses symmetry-adapted atomic orbital features from a low-cost quantum calculation to predict the energy of a molecule. OrbNet Denali is trained on a vast dataset…
▽ More
We present OrbNet Denali, a machine learning model for electronic structure that is designed as a drop-in replacement for ground-state density functional theory (DFT) energy calculations. The model is a message-passing neural network that uses symmetry-adapted atomic orbital features from a low-cost quantum calculation to predict the energy of a molecule. OrbNet Denali is trained on a vast dataset of 2.3 million DFT calculations on molecules and geometries. This dataset covers the most common elements in bio- and organic chemistry (H, Li, B, C, N, O, F, Na, Mg, Si, P, S, Cl, K, Ca, Br, I) as well as charged molecules. OrbNet Denali is demonstrated on several well-established benchmark datasets, and we find that it provides accuracy that is on par with modern DFT methods while offering a speedup of up to three orders of magnitude. For the GMTKN55 benchmark set, OrbNet Denali achieves WTMAD-1 and WTMAD-2 scores of 7.19 and 9.84, on par with modern DFT functionals. For several GMTKN55 subsets, which contain chemical problems that are not present in the training set, OrbNet Denali produces a mean absolute error comparable to those of DFT methods. For the Hutchison conformers benchmark set, OrbNet Denali has a median correlation coefficient of R^2=0.90 compared to the reference DLPNO-CCSD(T) calculation, and R^2=0.97 compared to the method used to generate the training data (wB97X-D3/def2-TZVP), exceeding the performance of any other method with a similar cost. Similarly, the model reaches chemical accuracy for non-covalent interactions in the S66x10 dataset. For torsional profiles, OrbNet Denali reproduces the torsion profiles of wB97X-D3/def2-TZVP with an average MAE of 0.12 kcal/mol for the potential energy surfaces of the diverse fragments in the TorsionNet500 dataset.
△ Less
Submitted 2 July, 2021; v1 submitted 1 July, 2021;
originally announced July 2021.
-
Entropy transfer from a quantum particle to a classical coherent light field
Authors:
John P. Bartolotta,
Simon B. Jäger,
Jarrod T. Reilly,
Matthew A. Norcia,
James K. Thompson,
Graeme Smith,
Murray J. Holland
Abstract:
In the field of light-matter interactions, it is often assumed that a classical light field that interacts with a quantum particle remains almost unchanged and thus contains nearly no information about the manipulated particles. To investigate the validity of this assumption, we develop and theoretically analyze a simple Gedankenexperiment which involves the interaction of a coherent state with a…
▽ More
In the field of light-matter interactions, it is often assumed that a classical light field that interacts with a quantum particle remains almost unchanged and thus contains nearly no information about the manipulated particles. To investigate the validity of this assumption, we develop and theoretically analyze a simple Gedankenexperiment which involves the interaction of a coherent state with a quantum particle in an optical cavity. We quantify the resulting alteration of the light field by measuring the fidelity of its initial and equilibrium states. Using Bayesian inference, we demonstrate the information transfer through photon measurements. In addition, we employ the concepts of quantum entropy and mutual information to quantify the entropy transfer from the particle to the light field. In the weak coupling limit, we validate the usually assumed negligible alteration of the light field and entropy transfer. In the strong coupling limit, however, we observe that the information of the initial particle state can be fully encoded in the light field, even for large photon numbers. Nevertheless, we show that spontaneous emission is a sufficient mechanism for removing the entropy initially stored in the particle. Our analysis provides a deeper understanding of the entropy exchange between quantum matter and classical light.
△ Less
Submitted 8 May, 2021;
originally announced May 2021.
-
Addendum: Action potential propagation and block in a model of atrial tissue with myocyte-fibroblast coupling
Authors:
Peter Mortensen,
Hao Gao,
Godfrey Smith,
Radostin D. Simitev
Abstract:
The analytical theory of our earlier study (Mortensen et al. (2021), Mathematical Medicine and Biology, 38(1), pp. 106-131) is extended to address the outstanding cases of fibroblast barrier distribution and myocyte strait distribution. In particular, closed-form approximations to the resting membrane potential and to the critical parameter values for propagation are derived for these two non-unif…
▽ More
The analytical theory of our earlier study (Mortensen et al. (2021), Mathematical Medicine and Biology, 38(1), pp. 106-131) is extended to address the outstanding cases of fibroblast barrier distribution and myocyte strait distribution. In particular, closed-form approximations to the resting membrane potential and to the critical parameter values for propagation are derived for these two non-uniform fibroblast distributions and are in good agreement with numerical estimates.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Finite rotating and translating vortex sheets
Authors:
Bartosz Protas,
Stefan G. Llewellyn Smith,
Takashi Sakajo
Abstract:
We consider the rotating and translating equilibria of open finite vortex sheets with endpoints in two-dimensional potential flows. New results are obtained concerning the stability of these equilibrium configurations which complement analogous results known for unbounded, periodic and circular vortex sheets. First, we show that the rotating and translating equilibria of finite vortex sheets are l…
▽ More
We consider the rotating and translating equilibria of open finite vortex sheets with endpoints in two-dimensional potential flows. New results are obtained concerning the stability of these equilibrium configurations which complement analogous results known for unbounded, periodic and circular vortex sheets. First, we show that the rotating and translating equilibria of finite vortex sheets are linearly unstable. However, while in the first case unstable perturbations grow exponentially fast in time, the growth of such perturbations in the second case is algebraic. In both cases the growth rates are increasing functions of the wavenumbers of the perturbations. Remarkably, these stability results are obtained entirely with analytical computations. Second, we obtain and analyze equations describing the time evolution of a straight vortex sheet in linear external fields. Third, it is demonstrated that the results concerning the linear stability analysis of the rotating sheet are consistent with the infinite-aspect-ratio limit of the stability results known for Kirchhoff's ellipse (Love 1893; Mitchell & Rossi 2008) and that the solutions we obtained accounting for the presence of external fields are also consistent with the infinite-aspect-ratio limits of the analogous solutions known for vortex patches.
△ Less
Submitted 15 June, 2021; v1 submitted 23 January, 2021;
originally announced January 2021.
-
Imaging neutron capture cross sections: i-TED proof-of-concept and future prospects based on Machine-Learning techniques
Authors:
V. Babiano-Suárez,
J. Lerendegui-Marco,
J. Balibrea-Correa,
L. Caballero,
D. Calvo,
I. Ladarescu,
C. Domingo-Pardo,
F. Calviño,
A. Casanovas,
A. Tarifeño-Saldivia,
V. Alcayne,
C. Guerrero,
M. A. Millán-Callado,
M. T. Rodríguez González,
M. Barbagallo,
O. Aberle,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
M. Bacak,
S. Bennett,
E. Berthoumieux,
J. Billowes,
D. Bosnar,
A. Brown
, et al. (110 additional authors not shown)
Abstract:
i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background reje…
▽ More
i-TED is an innovative detection system which exploits Compton imaging techniques to achieve a superior signal-to-background ratio in ($n,γ$) cross-section measurements using time-of-flight technique. This work presents the first experimental validation of the i-TED apparatus for high-resolution time-of-flight experiments and demonstrates for the first time the concept proposed for background rejection. To this aim both $^{197}$Au($n,γ$) and $^{56}$Fe($n, γ$) reactions were measured at CERN n\_TOF using an i-TED demonstrator based on only three position-sensitive detectors. Two \cds detectors were also used to benchmark the performance of i-TED. The i-TED prototype built for this study shows a factor of $\sim$3 higher detection sensitivity than state-of-the-art \cds detectors in the $\sim$10~keV neutron energy range of astrophysical interest. This paper explores also the perspectives of further enhancement in performance attainable with the final i-TED array consisting of twenty position-sensitive detectors and new analysis methodologies based on Machine-Learning techniques.
△ Less
Submitted 18 December, 2020;
originally announced December 2020.
-
Linear embedding of nonlinear dynamical systems and prospects for efficient quantum algorithms
Authors:
Alexander Engel,
Graeme Smith,
Scott E. Parker
Abstract:
The simulation of large nonlinear dynamical systems, including systems generated by discretization of hyperbolic partial differential equations, can be computationally demanding. Such systems are important in both fluid and kinetic computational plasma physics. This motivates exploring whether a future error-corrected quantum computer could perform these simulations more efficiently than any class…
▽ More
The simulation of large nonlinear dynamical systems, including systems generated by discretization of hyperbolic partial differential equations, can be computationally demanding. Such systems are important in both fluid and kinetic computational plasma physics. This motivates exploring whether a future error-corrected quantum computer could perform these simulations more efficiently than any classical computer. We describe a method for mapping any finite nonlinear dynamical system to an infinite linear dynamical system (embedding) and detail three specific cases of this method that correspond to previously-studied mappings. Then we explore an approach for approximating the resulting infinite linear system with finite linear systems (truncation). Using a number of qubits only logarithmic in the number of variables of the nonlinear system, a quantum computer could simulate truncated systems to approximate output quantities if the nonlinearity is sufficiently weak. Other aspects of the computational efficiency of the three detailed embedding strategies are also discussed.
△ Less
Submitted 10 June, 2021; v1 submitted 11 December, 2020;
originally announced December 2020.
-
Action potential propagation and block in a model of atrial tissue with myocyte-fibroblast coupling
Authors:
Peter Mortensen,
Hao Gao,
Godfrey Smith,
Radostin D. Simitev
Abstract:
The electrical coupling between myocytes and fibroblasts and the spacial distribution of fibroblasts within myocardial tissues are significant factors in triggering and sustaining cardiac arrhythmias but their roles are poorly understood. This article describes both direct numerical simulations and an asymptotic theory of propagation and block of electrical excitation in a model of atrial tissue w…
▽ More
The electrical coupling between myocytes and fibroblasts and the spacial distribution of fibroblasts within myocardial tissues are significant factors in triggering and sustaining cardiac arrhythmias but their roles are poorly understood. This article describes both direct numerical simulations and an asymptotic theory of propagation and block of electrical excitation in a model of atrial tissue with myocyte-fibroblast coupling. In particular, three idealised fibroblast distributions are introduced: uniform distribution, fibroblast barrier and myocyte strait, all believed to be constituent blocks of realistic fibroblast distributions. Primary action potential biomarkers including conduction velocity, peak potential and triangulation index are estimated from direct simulations in all cases. Propagation block is found to occur at certain critical values of the parameters defining each idealised fibroblast distribution and these critical values are accurately determined. An asymptotic theory proposed earlier is extended and applied to the case of a uniform fibroblast distribution. Biomarker values are obtained from hybrid analytical-numerical solutions of coupled fast-time and slow-time periodic boundary value problems and compare well to direct numerical simulations. The boundary of absolute refractoriness is determined solely by the fast-time problem and is found to depend on the values of the myocyte potential and on the slow inactivation variable of the sodium current ahead of the propagating pulse. In turn, these quantities are estimated from the slow-time problem using a regular perturbation expansion to find the steady state of the coupled myocyte-fibroblast kinetics. The asymptotic theory gives a simple analytical expression that captures with remarkable accuracy the block of propagation in the presence of fibroblasts.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Multi-task learning for electronic structure to predict and explore molecular potential energy surfaces
Authors:
Zhuoran Qiao,
Feizhi Ding,
Matthew Welborn,
Peter J. Bygrave,
Daniel G. A. Smith,
Animashree Anandkumar,
Frederick R. Manby,
Thomas F. Miller III
Abstract:
We refine the OrbNet model to accurately predict energy, forces, and other response properties for molecules using a graph neural-network architecture based on features from low-cost approximated quantum operators in the symmetry-adapted atomic orbital basis. The model is end-to-end differentiable due to the derivation of analytic gradients for all electronic structure terms, and is shown to be tr…
▽ More
We refine the OrbNet model to accurately predict energy, forces, and other response properties for molecules using a graph neural-network architecture based on features from low-cost approximated quantum operators in the symmetry-adapted atomic orbital basis. The model is end-to-end differentiable due to the derivation of analytic gradients for all electronic structure terms, and is shown to be transferable across chemical space due to the use of domain-specific features. The learning efficiency is improved by incorporating physically motivated constraints on the electronic structure through multi-task learning. The model outperforms existing methods on energy prediction tasks for the QM9 dataset and for molecular geometry optimizations on conformer datasets, at a computational cost that is thousand-fold or more reduced compared to conventional quantum-chemistry calculations (such as density functional theory) that offer similar accuracy.
△ Less
Submitted 1 December, 2020; v1 submitted 5 November, 2020;
originally announced November 2020.
-
Design of the ALPS II Optical System
Authors:
M. Diaz Ortiz,
J. Gleason,
H. Grote,
A. Hallal,
M. T. Hartman,
H. Hollis,
K. S. Isleif,
A. James,
K. Karan,
T. Kozlowski,
A. Lindner,
G. Messineo,
G. Mueller,
J. H. Poeld,
R. C. G. Smith,
A. D. Spector,
D. B. Tanner,
L. -W. Wei,
B. Willke
Abstract:
The Any Light Particle Search II (ALPS II) is an experiment currently being built at DESY in Hamburg, Germany, that will use a light-shining-through-a-wall (LSW) approach to search for axion-like particles. ALPS II represents a significant step forward for these types of experiments as it will use 24 superconducting dipole magnets, along with dual, high-finesse, 122 m long optical cavities. This p…
▽ More
The Any Light Particle Search II (ALPS II) is an experiment currently being built at DESY in Hamburg, Germany, that will use a light-shining-through-a-wall (LSW) approach to search for axion-like particles. ALPS II represents a significant step forward for these types of experiments as it will use 24 superconducting dipole magnets, along with dual, high-finesse, 122 m long optical cavities. This paper gives the first comprehensive recipe for the realization of the idea, proposed over 30 years ago, to use optical cavities before and after the wall to increase the power of the regenerated photon signal. The experiment is designed to achieve a sensitivity to the coupling between axion-like particles and photons down to g=2e-11 1/GeV for masses below 0.1 meV, more than three orders of magnitude beyond the sensitivity of previous laboratory experiments. The layout and main components that define ALPS II are discussed along with plans for reaching design sensitivity. An accompanying paper (Hallal, et al [1]) offers a more in-depth description of the heterodyne detection scheme, the first of two independent detection systems that will be implemented in ALPS II.
△ Less
Submitted 21 December, 2021; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Enhancing surface production of negative ions using nitrogen doped diamond in a deuterium plasma
Authors:
Gregory J. Smith,
James Ellis,
Roba Moussaoui,
Cédric Pardanaud,
Céline Martin,
Jocelyn Achard,
Riadh Issaoui,
Timo Gans,
James P. Dedrick,
Gilles Cartry
Abstract:
The production of negative ions is of significant interest for applications including mass spectrometry, particle acceleration, material surface processing, and neutral beam injection for magnetic confinement fusion. Methods to improve the efficiency of the surface production of negative ions, without the use of low work function metals, are of interest for mitigating the complex engineering chall…
▽ More
The production of negative ions is of significant interest for applications including mass spectrometry, particle acceleration, material surface processing, and neutral beam injection for magnetic confinement fusion. Methods to improve the efficiency of the surface production of negative ions, without the use of low work function metals, are of interest for mitigating the complex engineering challenges these materials introduce. In this study we investigate the production of negative ions by doping diamond with nitrogen. Negatively biased ($-20$ V or $-130$ V), nitrogen doped micro-crystalline diamond films are introduced to a low pressure deuterium plasma (helicon source operated in capacitive mode, 2 Pa, 26 W) and negative ion energy distribution functions (NIEDFs) are measured via mass spectrometry with respect to the surface temperature (30$^{\circ}$C to 750$^{\circ}$C) and dopant concentration. The results suggest that nitrogen doping has little influence on the yield when the sample is biased at $-130$ V, but when a relatively small bias voltage of $-20$ V is applied the yield is increased by a factor of 2 above that of un-doped diamond when its temperature reaches 550$^{\circ}$C. The doping of diamond with nitrogen is a new method for controlling the surface production of negative ions, which continues to be of significant interest for a wide variety of practical applications.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Evaluating the leeway coefficient for different ocean drifters using operational models
Authors:
Graig Sutherland,
Nancy Soontiens,
Fraser Davidson,
Gregory C. Smith,
Natacha Bernier,
Hauke Blanken,
Douglas Schillinger,
Guillaume Marcotte,
Johannes Röhrs,
Knut-Frode Dagestad,
Kai H. Christensen,
Oyvind Breivik
Abstract:
The water following characteristics of six different drifter types are investigated using two different operational marine environmental prediction systems: one produced by Environment and Climate Change Canada (ECCC) and the other produced by the Norwegian Meteorological Institute (METNO). These marine prediction systems include ocean circulation models, atmospheric models, and surface wave model…
▽ More
The water following characteristics of six different drifter types are investigated using two different operational marine environmental prediction systems: one produced by Environment and Climate Change Canada (ECCC) and the other produced by the Norwegian Meteorological Institute (METNO). These marine prediction systems include ocean circulation models, atmospheric models, and surface wave models. Two leeway models are tested for use in drift object prediction: an implicit leeway model where the Stokes drift is implicit in the leeway coefficient, and an explicit leeway model where the Stokes drift is provided by the wave model. Both leeway coefficients are allowed to vary in direction and time in order to perfectly reproduce the observed drifter trajectory. This creates a time series of the leeway coefficients which exactly reproduce the observed drifter trajectories. Mean values for the leeway coefficients are consistent with previous studies which utilized direct observations of the leeway. For all drifters and models, the largest source of variance in the leeway coefficient occurs at the inertial frequency and the evidence suggests it is related to uncertainties in the ocean inertial currents.
△ Less
Submitted 19 May, 2020;
originally announced May 2020.
-
The CECAM Electronic Structure Library and the modular software development paradigm
Authors:
Micael J. T. Oliveira,
Nick Papior,
Yann Pouillon,
Volker Blum,
Emilio Artacho,
Damien Caliste,
Fabiano Corsetti,
Stefano de Gironcoli,
Alin M. Elena,
Alberto Garcia,
Victor M. Garcia-Suarez,
Luigi Genovese,
William P. Huhn,
Georg Huhs,
Sebastian Kokott,
Emine Kucukbenli,
Ask H. Larsen,
Alfio Lazzaro,
Irina V. Lebedeva,
Yingzhou Li,
David Lopez-Duran,
Pablo Lopez-Tarifa,
Martin Luders,
Miguel A. L. Marques,
Jan Minar
, et al. (12 additional authors not shown)
Abstract:
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu…
▽ More
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers.
△ Less
Submitted 24 June, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Highly-Chirped Bragg Gratings for Integrated Silica Spectrometers
Authors:
James W. Field,
Sam A. Berry,
Rex H. S. Bannerman,
Devin H. Smith,
Corin B. E. Gawith,
Peter G. R. Smith,
James C. Gates
Abstract:
A blazed chirped Bragg grating in a planar silica waveguide device was used to create an integrated diffractive element for a spectrometer. The grating diffracts light from a waveguide and creates a wavelength dependent focus in a manner similar to a bulk diffraction grating spectrometer. An external imaging system is used to analyse the light, later device iterations plan to integrate detectors t…
▽ More
A blazed chirped Bragg grating in a planar silica waveguide device was used to create an integrated diffractive element for a spectrometer. The grating diffracts light from a waveguide and creates a wavelength dependent focus in a manner similar to a bulk diffraction grating spectrometer. An external imaging system is used to analyse the light, later device iterations plan to integrate detectors to make a fully integrated spectrometer. Devices were fabricated with grating period chirp rates in excess of 100nm/mm, achieving a focal length of 5.5mm. Correction of coma aberrations resulted in a device with a footprint of 20mm x 10mm, a peak FWHM resolution of 1.8nm, a typical FWHM resolution of 2.6nm and operating with a 160nm bandwidth centered at 1550nm.
△ Less
Submitted 27 August, 2020; v1 submitted 24 January, 2020;
originally announced January 2020.
-
The Nusselt numbers of horizontal convection
Authors:
Cesar. B. Rocha,
Navid C. Constantinou,
Stefan G. Llewellyn Smith,
William R. Young
Abstract:
We consider the problem of horizontal convection in which non-uniform buoyancy, $b_{\rm s}(x,y)$, is imposed on the top surface of a container and all other surfaces are insulating. Horizontal convection produces a net horizontal flux of buoyancy, $\mathbf{J}$, defined by vertically and temporally averaging the interior horizontal flux of buoyancy. We show that…
▽ More
We consider the problem of horizontal convection in which non-uniform buoyancy, $b_{\rm s}(x,y)$, is imposed on the top surface of a container and all other surfaces are insulating. Horizontal convection produces a net horizontal flux of buoyancy, $\mathbf{J}$, defined by vertically and temporally averaging the interior horizontal flux of buoyancy. We show that $\overline{\mathbf{J}\cdot\mathbf{\nabla}b_{\rm s}}=-κ\langle|\boldsymbol{\nabla}b|^2\rangle$; overbar denotes a space-time average over the top surface, angle brackets denote a volume-time average and $κ$ is the molecular diffusivity of buoyancy $b$. This connection between $\mathbf{J}$ and $κ\langle|\boldsymbol{\nabla}b|^2\rangle$ justifies the definition of the horizontal-convective Nusselt number, $Nu$, as the ratio of $κ\langle|\boldsymbol{\nabla}b|^2\rangle$ to the corresponding quantity produced by molecular diffusion alone. We discuss the advantages of this definition of $Nu$ over other definitions of horizontal-convective Nusselt number currently in use. We investigate transient effects and show that $κ\langle|\boldsymbol{\nabla}b|^2\rangle$ equilibrates more rapidly than other global averages, such as the domain averaged kinetic energy and bottom buoyancy. We show that $κ\langle|\boldsymbol{\nabla} b|^2\rangle$ is essentially the volume-averaged rate of Boussinesq entropy production within the enclosure. In statistical steady state, the interior entropy production is balanced by a flux of entropy through the top surface. This leads to an equivalent "surface Nusselt number", defined as the surface average of vertical buoyancy flux through the top surface times the imposed surface buoyancy $b_{\rm s}(x,y)$. In experiments it is likely easier to evaluate the surface entropy flux, rather than the volume integral of $|\mathbf{\nabla}b|^2$ demanded by $κ\langle|\mathbf{\nabla}b|^2\rangle$.
△ Less
Submitted 24 March, 2020; v1 submitted 11 December, 2019;
originally announced December 2019.
-
Review and new concepts for neutron-capture measurements of astrophysical interest
Authors:
C. Domingo-Pardo,
V. Babiano-Suarez,
J. Balibrea-Correa,
L. Caballero,
I. Ladarescu,
J. Lerendegui-Marco,
J. L. Tain,
F. Calviño,
A. Casanovas,
A. Segarra,
A. E. Tarifeño-Saldivia,
C. Guerrero,
M. A. Millán-Callado,
J. M. Quesada,
M. T. Rodríguez-González,
O. Aberle,
V. Alcayne,
S. Amaducci,
J. Andrzejewski,
L. Audouin,
M. Bacak,
M. Barbagallo,
S. Bennett,
E. Berthoumieux,
D. Bosnar
, et al. (106 additional authors not shown)
Abstract:
The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on t…
▽ More
The idea of slow-neutron capture nucleosynthesis formulated in 1957 triggered a tremendous experimental effort in different laboratories worldwide to measure the relevant nuclear physics input quantities, namely ($n,γ$) cross sections over the stellar temperature range (from few eV up to several hundred keV) for most of the isotopes involved from Fe up to Bi. A brief historical review focused on total energy detectors will be presented to illustrate how, advances in instrumentation have led, over the years, to the assessment and discovery of many new aspects of $s$-process nucleosynthesis and to the progressive refinement of theoretical models of stellar evolution. A summary will be presented on current efforts to develop new detection concepts, such as the Total-Energy Detector with $γ$-ray imaging capability (i-TED). The latter is based on the simultaneous combination of Compton imaging with neutron time-of-flight (TOF) techniques, in order to achieve a superior level of sensitivity and selectivity in the measurement of stellar neutron capture rates.
△ Less
Submitted 16 November, 2019;
originally announced November 2019.
-
Zn-indiffused diced ridge waveguides in MgO:PPLN generating 1 watt 780 nm SHG at 70% efficiency
Authors:
Sam A. Berry,
Lewis G. Carpenter,
Alan C. Gray,
Peter G. R. Smith,
Corin B. E. Gawith
Abstract:
We present a metallic zinc indiffused diced ridge waveguide in magnesium doped periodically poled lithium niobate (MgO:PPLN) capable of generating over 1 W of 780 nm with 70% efficiency. Our 40 mm long waveguide has near circular fundamental mode output with diameter 10.4 um and insertion loss of -1.17 dB. Using a commercial 2 W EDFA-based system, the SHG output power did not exhibit roll-off at m…
▽ More
We present a metallic zinc indiffused diced ridge waveguide in magnesium doped periodically poled lithium niobate (MgO:PPLN) capable of generating over 1 W of 780 nm with 70% efficiency. Our 40 mm long waveguide has near circular fundamental mode output with diameter 10.4 um and insertion loss of -1.17 dB. Using a commercial 2 W EDFA-based system, the SHG output power did not exhibit roll-off at maximum available pump power.
△ Less
Submitted 10 December, 2019; v1 submitted 11 November, 2019;
originally announced November 2019.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab -- 2018 update to PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo,
A. Shahinyan
, et al. (100 additional authors not shown)
Abstract:
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework…
▽ More
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework used to design the BDX experiment. Using a common Monte Carlo framework for the test and the proposed experiment, we optimized the selection cuts to maximize the reach considering simultaneously the signal, cosmic-ray background (assessed in Catania test with BDX-Proto) and beam-related backgrounds (irreducible NC and CC neutrino interactions as determined by simulation). Our results confirmed what was presented in the original proposal: with 285 days of a parasitic run at 65 $μ$A (corresponding to $10^{22}$ EOT) the BDX experiment will lower the exclusion limits in the case of no signal by one to two orders of magnitude in the parameter space of dark-matter coupling versus mass.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
Directionally Accelerated Detection of an Unknown Second Reactor with Antineutrinos for Mid-Field Nonproliferation Monitoring
Authors:
D. L. Danielson,
O. A. Akindele,
M. Askins,
M. Bergevin,
A. Bernstein,
J. Burns,
A. Carroll,
J. Coleman,
R. Collins,
C. Connor,
D. F. Cowen,
F. Dalnoki-Veress,
S. Dazeley,
M. V. Diwan,
J. Duron,
S. T. Dye,
J. Eisch,
A. Ezeribe,
V. Fischer,
R. Foster,
K. Frankiewicz,
C. Grant,
J. Gribble,
J. He,
C. Holligan
, et al. (45 additional authors not shown)
Abstract:
When monitoring a reactor site for nuclear nonproliferation purposes, the presence of an unknown or hidden nuclear reactor could be obscured by the activities of a known reactor of much greater power nearby. Thus when monitoring reactor activities by the observation of antineutrino emissions, one must discriminate known background reactor fluxes from possible unknown reactor signals under investig…
▽ More
When monitoring a reactor site for nuclear nonproliferation purposes, the presence of an unknown or hidden nuclear reactor could be obscured by the activities of a known reactor of much greater power nearby. Thus when monitoring reactor activities by the observation of antineutrino emissions, one must discriminate known background reactor fluxes from possible unknown reactor signals under investigation. To quantify this discrimination, we find the confidence to reject the (null) hypothesis of a single proximal reactor, by exploiting directional antineutrino signals in the presence of a second, unknown reactor. In particular, we simulate the inverse beta decay (IBD) response of a detector filled with a 1 kT fiducial mass of Gadolinium-doped liquid scintillator in mineral oil. We base the detector geometry on that of WATCHMAN, an upcoming antineutrino monitoring experiment soon to be deployed at the Boulby mine in the United Kingdom whose design and deployment will be detailed in a forthcoming white paper. From this simulation, we construct an analytical model of the IBD event distribution for the case of one $4\mathrm{\ GWt}\pm2\%$ reactor 25 km away from the detector site, and for an additional, unknown, 35 MWt reactor 3 to 5 km away. The effects of natural-background rejection cuts are approximated. Applying the model, we predict $3σ$ confidence to detect the presence of an unknown reactor within five weeks, at standoffs of 3 km or nearer. For more distant unknown reactors, the $3σ$ detection time increases significantly. However, the relative significance of directional sensitivity also increases, providing up to an eight week speedup to detect an unknown reactor at 5 km away. Therefore, directionally sensitive antineutrino monitoring can accelerate the mid-field detection of unknown reactors whose operation might otherwise be masked by more powerful reactors in the vicinity.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Quantum Algorithm for the Vlasov Equation
Authors:
Alexander Engel,
Graeme Smith,
Scott E. Parker
Abstract:
The Vlasov-Maxwell system of equations, which describes classical plasma physics, is extremely challenging to solve, even by numerical simulation on powerful computers. By linearizing and assuming a Maxwellian background distribution function, we convert the Vlasov-Maxwell system into a Hamiltonian simulation problem. Then for the limiting case of electrostatic Landau damping, we design and verify…
▽ More
The Vlasov-Maxwell system of equations, which describes classical plasma physics, is extremely challenging to solve, even by numerical simulation on powerful computers. By linearizing and assuming a Maxwellian background distribution function, we convert the Vlasov-Maxwell system into a Hamiltonian simulation problem. Then for the limiting case of electrostatic Landau damping, we design and verify a quantum algorithm, appropriate for a future error-corrected universal quantum computer. While the classical simulation has costs that scale as $\mathcal{O}(N_v t)$ for a velocity grid with $N_v$ grid points and simulation time $t$, our quantum algorithm scales as $\mathcal{O}(\text{polylog}(N_v) t/δ)$ where $δ$ is the measurement error, and weaker scalings have been dropped. Extensions, including electromagnetics and higher dimensions, are discussed. A quantum computer could efficiently handle a high-resolution, six-dimensional phase-space grid, but the $1/δ$ cost factor to extract an accurate result remains a difficulty. This paper provides insight into the possibility of someday achieving efficient plasma simulation on a quantum computer.
△ Less
Submitted 17 December, 2019; v1 submitted 22 July, 2019;
originally announced July 2019.
-
Development of a High Rate Front-end ASIC for X-ray Spectroscopy and Diffraction Applications
Authors:
Emerson Vernon,
Gianluigi De Geronimo,
Jonathan Baldwin,
Wei Chen,
Jack Fried,
Gabriele Giacomini,
Anthony Kuczewski,
John Kuczewski,
Joe Mead,
Antonino Miceli,
John S. Okasinski,
Don Pinelli,
Orlando Quaranta,
Abdul K. Rumaiz,
Peter Siddons,
Graham Smith,
Milutin Stanacevic,
Russell Woods
Abstract:
We developed a new front-end application specific integrated circuit (ASIC) for the upgrade of the Maia x-ray microprobe. The ASIC instruments 32 configurable front-end channels that perform either positive or negative charge amplification, pulse shaping, peak amplitude and time extraction along with buffered analog storage. At a gain of 3.6 V/fC, 1 $μ$s peaking time and a temperature of 248 K, an…
▽ More
We developed a new front-end application specific integrated circuit (ASIC) for the upgrade of the Maia x-ray microprobe. The ASIC instruments 32 configurable front-end channels that perform either positive or negative charge amplification, pulse shaping, peak amplitude and time extraction along with buffered analog storage. At a gain of 3.6 V/fC, 1 $μ$s peaking time and a temperature of 248 K, an electronic resolution of 13- and 10 electrons rms was measured with and without a SDD sensor respectively. A spectral resolution of 170 eV FWHM at 5.9 keV was obtained with an $^{55}$Fe source. The channel linearity was better than $\pm$ 1 % with rate capabilities up to 40 kcps. The ASIC was fabricated in a commercial 250 nm process with a footprint of 6.3 mm x 3.9 mm and dissipates 167 mW of static power.
△ Less
Submitted 13 May, 2019;
originally announced May 2019.
-
Radio-frequency reflectometry of a quantum dot using an ultra-low-noise SQUID amplifier
Authors:
F. J. Schupp,
F. Vigneau,
Y. Wen,
A. Mavalankar,
J. Griffiths,
G. A. C. Jones,
I. Farrer,
D. A. Ritchie,
C. G. Smith,
L. C. Camenzind,
L. Yu,
D. M. Zumbühl,
G. A. D. Briggs,
N. Ares,
E. A. Laird
Abstract:
Fault-tolerant spin-based quantum computers will require fast and accurate qubit readout. This can be achieved using radio-frequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The…
▽ More
Fault-tolerant spin-based quantum computers will require fast and accurate qubit readout. This can be achieved using radio-frequency reflectometry given sufficient sensitivity to the change in quantum capacitance associated with the qubit states. Here, we demonstrate a 23-fold improvement in capacitance sensitivity by supplementing a cryogenic semiconductor amplifier with a SQUID preamplifier. The SQUID amplifier operates at a frequency near 200 MHz and achieves a noise temperature below 600 mK when integrated into a reflectometry circuit, which is within a factor 120 of the quantum limit. It enables a record sensitivity to capacitance of 0.07 aF/\sqrt{Hz}. The setup is used to acquire charge stability diagrams of a gate-defined double quantum dot in a short time with a signal-to-noise ration of about 38 in 1 microsecond of integration time.
△ Less
Submitted 29 June, 2020; v1 submitted 12 October, 2018;
originally announced October 2018.
-
High-birefringence direct UV-written waveguides for heralded single-photon sources at telecommunication wavelengths
Authors:
Matthew T. Posner,
T. Hiemstra,
Paolo L. Mennea,
Rex H. S. Bannerman,
Ulrich B. Hoff,
Andreas Eckstein,
W. Steven Kolthammer,
Ian A. Walmsley,
Devin H. Smith,
James C. Gates,
Peter G. R. Smith
Abstract:
Direct UV-written waveguides are fabricated in silica-on-silicon with birefringence of $(4.9 \pm 0.2) \times 10^{-4}$, much greater than previously reported in this platform. We show that these waveguides are suitable for the generation of heralded single photons at telecommunication wavelengths by spontaneous four-wave mixing. A pulsed pump field at 1060 nm generates pairs of photons in highly de…
▽ More
Direct UV-written waveguides are fabricated in silica-on-silicon with birefringence of $(4.9 \pm 0.2) \times 10^{-4}$, much greater than previously reported in this platform. We show that these waveguides are suitable for the generation of heralded single photons at telecommunication wavelengths by spontaneous four-wave mixing. A pulsed pump field at 1060 nm generates pairs of photons in highly detuned, spectrally uncorrelated modes near 1550 nm and 800 nm. Waveguide-to-fiber coupling efficiencies of 78-91% are achieved for all fields. Waveguide birefringence is controlled through dopant concentration of $\mathrm{GeCl_4}$ and $\mathrm{BCl_3}$ using the flame hydrolysis deposition process. The technology provides a route towards the scalability of silica-on-silicon integrated components for photonic quantum experiments.
△ Less
Submitted 30 May, 2018;
originally announced May 2018.
-
Modular Linear Optical Circuits
Authors:
Paolo L. Mennea,
William R. Clements,
Devin H. Smith,
James C. Gates,
Benjamin J. Metcalf,
Rex H. S. Bannerman,
Roel Burgwal,
Jelmer J. Renema,
W. Steven Kolthammer,
Ian A. Walmsley,
Peter G. R. Smith
Abstract:
We propose and demonstrate a modular architecture for reconfigurable on-chip linear-optical circuits. Each module contains 10 independent phase-controlled Mach-Zehnder interferometers; several such modules can be connected to each other to build large reconfigurable interferometers. With this architecture, large interferometers are easier to build and characterize than with traditional, bespoke, m…
▽ More
We propose and demonstrate a modular architecture for reconfigurable on-chip linear-optical circuits. Each module contains 10 independent phase-controlled Mach-Zehnder interferometers; several such modules can be connected to each other to build large reconfigurable interferometers. With this architecture, large interferometers are easier to build and characterize than with traditional, bespoke, monolithic designs. We demonstrate our approach by fabricating three modules in the form of UV-written silica-on-silicon chips. We characterize these chips, connect them to each other, and implement a wide range of linear optical transformations. We envisage that this architecture will enable many future experiments in quantum optics.
△ Less
Submitted 12 March, 2018;
originally announced March 2018.
-
First-order symmetry-adapted perturbation theory for multiplet splittings
Authors:
Konrad Patkowski,
Piotr S. Żuchowski,
Daniel G. A. Smith
Abstract:
We present a symmetry-adapted perturbation theory (SAPT) for the interaction of two high-spin open-shell molecules (described by their restricted open-shell Hartree-Fock determinants) resulting in low-spin states of the complex. The previously available SAPT formalisms, except for some system-specific studies for few-electron complexes, were restricted to the high-spin state of the interacting sys…
▽ More
We present a symmetry-adapted perturbation theory (SAPT) for the interaction of two high-spin open-shell molecules (described by their restricted open-shell Hartree-Fock determinants) resulting in low-spin states of the complex. The previously available SAPT formalisms, except for some system-specific studies for few-electron complexes, were restricted to the high-spin state of the interacting system. Thus, the new approach provides, for the first time, a SAPT-based estimate of the splittings between different spin states of the complex. We have derived and implemented the lowest-order SAPT term responsible for these splittings, that is, the first-order exchange energy. We show that within the so-called S2 approximation commonly used in SAPT (neglecting effects that vanish as fourth or higher powers of intermolecular overlap integrals), the first-order exchange energies for all multiplets are linear combinations of two matrix elements: a diagonal exchange term that determines the spin-averaged effect and a {\em spin-flip term} responsible for the splittings between the states. The numerical factors in this linear combination are determined solely by the Clebsch-Gordan coefficients: accordingly, the S2 approximation implies a Heisenberg Hamiltonian picture with a single coupling strength parameter determining all the splittings. The new approach is cast into both molecular-orbital and atomic-orbital expressions: the latter enable an efficient density-fitted implementation. We test the newly developed formalism on several open-shell complexes ranging from diatomic systems (Li+H, Mn+Mn,...) to the phenalenyl dimer.
△ Less
Submitted 12 January, 2018;
originally announced January 2018.
-
Harnessing electro-optic correlations in an efficient mechanical converter
Authors:
A. P. Higginbotham,
P. S. Burns,
M. D. Urmey,
R. W. Peterson,
N. S. Kampel,
B. M. Brubaker,
G. Smith,
K. W. Lehnert,
C. A. Regal
Abstract:
An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but developing a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-opt…
▽ More
An optical network of superconducting quantum bits (qubits) is an appealing platform for quantum communication and distributed quantum computing, but developing a quantum-compatible link between the microwave and optical domains remains an outstanding challenge. Operating at $T < 100$ mK temperatures, as required for quantum electrical circuits, we demonstrate a mechanically-mediated microwave-optical converter with 47$\%$ conversion efficiency, and use a feedforward protocol to reduce added noise to 38 photons. The feedforward protocol harnesses our discovery that noise emitted from the two converter output ports is strongly correlated because both outputs record thermal motion of the same mechanical mode. We also discuss a quantum feedforward protocol that, given high system efficiencies, allows quantum information to be transferred even when thermal phonons enter the mechanical element faster than the electro-optic conversion rate.
△ Less
Submitted 17 September, 2019; v1 submitted 18 December, 2017;
originally announced December 2017.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab: an update on PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
M. Osipenko,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo
, et al. (101 additional authors not shown)
Abstract:
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around t…
▽ More
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around the dump. First, we have implemented the detailed BDX experimental geometry into a FLUKA simulation, in consultation with experts from the JLab Radiation Control Group. The FLUKA simulation has been compared directly to our GEANT4 simulations and shown to agree in regions of validity. The FLUKA interaction package, with a tuned set of biasing weights, is naturally able to generate reliable particle distributions with very small probabilities and therefore predict rates at the detector location beyond the planned shielding around the beam dump. Second, we have developed a plan to conduct measurements of the muon ux from the Hall-A dump in its current configuration to validate our simulations.
△ Less
Submitted 8 January, 2018; v1 submitted 5 December, 2017;
originally announced December 2017.
-
Design and Performance of the Spin Asymmetries of the Nucleon Experiment
Authors:
J. D. Maxwell,
W. R. Armstrong,
S. Choi,
M. K. Jones,
H. Kang,
A. Liyanage,
Z. -E. Meziani,
J. Mulholland,
L. Ndukum,
O. A. Rondon,
A. Ahmidouch,
I. Albayrak,
A. Asaturyan,
O. Ates,
H. Baghdasaryan,
W. Boeglin,
P. Bosted,
E. Brash,
J. Brock,
C. Butuceanu,
M. Bychkov,
C. Carlin,
P. Carter,
C. Chen,
J. -P. Chen
, et al. (80 additional authors not shown)
Abstract:
The Spin Asymmetries of the Nucleon Experiment (SANE) performed inclusive, double-polarized electron scattering measurements of the proton at the Continuous Electron Beam Accelerator Facility at Jefferson Lab. A novel detector array observed scattered electrons of four-momentum transfer $2.5 < Q^2< 6.5$ GeV$^2$ and Bjorken scaling $0.3<x<0.8$ from initial beam energies of 4.7 and 5.9 GeV. Employin…
▽ More
The Spin Asymmetries of the Nucleon Experiment (SANE) performed inclusive, double-polarized electron scattering measurements of the proton at the Continuous Electron Beam Accelerator Facility at Jefferson Lab. A novel detector array observed scattered electrons of four-momentum transfer $2.5 < Q^2< 6.5$ GeV$^2$ and Bjorken scaling $0.3<x<0.8$ from initial beam energies of 4.7 and 5.9 GeV. Employing a polarized proton target whose magnetic field direction could be rotated with respect to the incident electron beam, both parallel and near perpendicular spin asymmetries were measured, allowing model-independent access to transverse polarization observables $A_1$, $A_2$, $g_1$, $g_2$ and moment $d_2$ of the proton. This document summarizes the operation and performance of the polarized target, polarized electron beam, and novel detector systems used during the course of the experiment, and describes analysis techniques utilized to access the physics observables of interest.
△ Less
Submitted 21 December, 2017; v1 submitted 22 November, 2017;
originally announced November 2017.
-
Post-aragonite phases of CaCO$_{3}$ at lower mantle pressures
Authors:
Dean Smith,
Keith V. Lawler,
Miguel Martinez-Canales,
Austin W. Daykin,
Zachary Fussell,
G. Alexander Smith,
Christian Childs,
Jesse S. Smith,
Chris J. Pickard,
Ashkan Salamat
Abstract:
The stability, structure and properties of carbonate minerals at lower mantle conditions has significant impact on our understanding of the global carbon cycle and the composition of the interior of the Earth. In recent years, there has been significant interest in the behavior of carbonates at lower mantle conditions, specifically in their carbon hybridization, which has relevance for the storage…
▽ More
The stability, structure and properties of carbonate minerals at lower mantle conditions has significant impact on our understanding of the global carbon cycle and the composition of the interior of the Earth. In recent years, there has been significant interest in the behavior of carbonates at lower mantle conditions, specifically in their carbon hybridization, which has relevance for the storage of carbon within the deep mantle. Using high-pressure synchrotron X-ray diffraction in a diamond anvil cell coupled with direct laser heating of CaCO$_{3}$ using a CO$_{2}$ laser, we identify a crystalline phase of the material above 40 GPa $-$ corresponding to a lower mantle depth of around 1,000 km $-$ which has first been predicted by \textit{ab initio} structure predictions. The observed $sp^{2}$ carbon hybridized species at 40 GPa is monoclinic with $P2_{1}/c$ symmetry and is stable up to 50 GPa, above which it transforms into a structure which cannot be indexed by existing known phases. A combination of \textit{ab initio} random structure search (AIRSS) and quasi-harmonic approximation (QHA) calculations are used to re-explore the relative phase stabilities of the rich phase diagram of CaCO$_{3}$. Nudged elastic band (NEB) calculations are used to investigate the reaction mechanisms between relevant crystal phases of CaCO$_{3}$ and we postulate that the mineral is capable of undergoing $sp^{2}$-$sp^{3}$ hybridization change purely in the $P2_{1}/c$ structure $-$ forgoing the accepted post-aragonite $Pmmn$ structure.
△ Less
Submitted 17 January, 2018; v1 submitted 7 September, 2017;
originally announced September 2017.
-
Microbial mutualism at a distance: the role of geometry in diffusive exchanges
Authors:
François J. Peaudecerf,
Freddy Bunbury,
Vaibhav Bhardwaj,
Martin A. Bees,
Alison G. Smith,
Raymond E. Goldstein,
Ottavio A. Croze
Abstract:
The exchange of diffusive metabolites is known to control the spatial patterns formed by microbial populations, as revealed by recent studies in the laboratory. However, the matrices used, such as agarose pads, lack the structured geometry of many natural microbial habitats, including in the soil or on the surfaces of plants or animals. Here we address the important question of how such geometry m…
▽ More
The exchange of diffusive metabolites is known to control the spatial patterns formed by microbial populations, as revealed by recent studies in the laboratory. However, the matrices used, such as agarose pads, lack the structured geometry of many natural microbial habitats, including in the soil or on the surfaces of plants or animals. Here we address the important question of how such geometry may control diffusive exchanges and microbial interaction. We model mathematically mutualistic interactions within a minimal unit of structure: two growing reservoirs linked by a diffusive channel through which metabolites are exchanged. The model is applied to study a synthetic mutualism, experimentally parameterised on a model algal-bacterial co-culture. Analytical and numerical solutions of the model predict conditions for the successful establishment of remote mutualisms, and how this depends, often counterintutively, on diffusion geometry. We connect our findings to understanding complex behaviour in synthetic and naturally occurring microbial communities.
△ Less
Submitted 2 February, 2018; v1 submitted 5 August, 2017;
originally announced August 2017.
-
Experimental setup and procedure for the measurement of the 7Be(n,p)7Li reaction at n_TOF
Authors:
M. Barbagallo,
J. Andrzejewski,
M. Mastromarco,
J. Perkowski,
L. A. Damone,
A. Gawlik,
L. Cosentino,
P. Finocchiaro,
E. A. Maugeri,
A. Mazzone,
R. Dressler,
S. Heinitz,
N. Kivel,
D. Schumann,
N. Colonna,
O. Aberle,
S. Amaducci,
L. Audouin,
M. Bacak,
J. Balibrea,
F. Bečvář,
G. Bellia,
E. Berthoumieux,
J. Billowes,
D. Bosnar
, et al. (103 additional authors not shown)
Abstract:
Following the completion of the second neutron beam line and the related experimental area (EAR2) at the n_TOF spallation neutron source at CERN, several experiments were planned and performed. The high instantaneous neutron flux available in EAR2 allows to investigate neutron indiced reactions with charged particles in the exit channel even employing targets made out of small amounts of short-liv…
▽ More
Following the completion of the second neutron beam line and the related experimental area (EAR2) at the n_TOF spallation neutron source at CERN, several experiments were planned and performed. The high instantaneous neutron flux available in EAR2 allows to investigate neutron indiced reactions with charged particles in the exit channel even employing targets made out of small amounts of short-lived radioactive isotopes. After the successful measurement of the 7Be(n,α)α cross section, the 7Be(n,p)7Li reaction was studied in order to provide still missing cross section data of relevance for Big Bang Nucleosynthesis (BBN), in an attempt to find a solution to the cosmological Lithium abundance problem. This paper describes the experimental setup employed in such a measurement and its characterization.
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
The Effects of Orographic Geometry on Supercell Thunderstorms
Authors:
Galen M. Smith,
Yuh-Lang Lin
Abstract:
The effect of elongated bell-shaped mountain orientation on supercell thunderstorms is numerically investigated using the Bryan Cloud Model 1 (CM1). The orography is varied by three mountain heights and is varied in four different positions, effectively producing 12 different terrain configurations. It is found that the different orientations produce variations in the supercell life cycle with sho…
▽ More
The effect of elongated bell-shaped mountain orientation on supercell thunderstorms is numerically investigated using the Bryan Cloud Model 1 (CM1). The orography is varied by three mountain heights and is varied in four different positions, effectively producing 12 different terrain configurations. It is found that the different orientations produce variations in the supercell life cycle with shorter cycles for higher inflow rates. Furthermore, these cycles are associated with the storm reaching its minimum intensity just after a peak rain period. Moreover, the effect of stronger inflow was seen before direct storm-terrain interactions started. The higher inflow also played a significant role in increasing rainfall rate and areal extent, to the point that further convection, associated with the cold pool, was triggered adding to rainfall amount. Using a stricter form of the National Weather Service Tornado Detection Algorithm to investigate the tornadic nature of simulated supercells; it is found that terrain blocking effects are dominative and that elongating the terrain axis approximately parallel to the propagation vector produced the strongest potential to generate a tornadic supercell thunderstorm. Although the simulated case with the highest mountain produced the most tornadic thunderstorms it is seen that increasing the terrain height alone is not sufficient to make tornadogenesis more probable as more tornadic supercells were simulated with lower heights compared to moderate terrain heights.
△ Less
Submitted 2 March, 2016;
originally announced March 2016.
-
Orographic Effects on Supercell: Development and Structure, Intensity and Tracking
Authors:
Galen M. Smith,
Yuh-Lang Lin,
Yevgenii Rastigejev
Abstract:
Terrain effects on thunderstorms, which are conducive to tornado formation, are investigated.
Terrain effects on thunderstorms, which are conducive to tornado formation, are investigated.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.