-
Modeling phonon-mediated quasiparticle poisoning in superconducting qubit arrays
Authors:
Eric Yelton,
Clayton P. Larson,
Vito Iaia,
Kenneth Dodge,
Guglielmo La Magna,
Paul G. Baity,
Ivan V. Pechenezhskiy,
Robert McDermott,
Noah Kurinsky,
Gianluigi Catelani,
Britton L. T. Plourde
Abstract:
Correlated errors caused by ionizing radiation impacting superconducting qubit chips are problematic for quantum error correction. Such impacts generate quasiparticle (QP) excitations in the qubit electrodes, which temporarily reduce qubit coherence significantly. The many energetic phonons produced by a particle impact travel efficiently throughout the device substrate and generate quasiparticles…
▽ More
Correlated errors caused by ionizing radiation impacting superconducting qubit chips are problematic for quantum error correction. Such impacts generate quasiparticle (QP) excitations in the qubit electrodes, which temporarily reduce qubit coherence significantly. The many energetic phonons produced by a particle impact travel efficiently throughout the device substrate and generate quasiparticles with high probability, thus causing errors on a large fraction of the qubits in an array simultaneously. We describe a comprehensive strategy for the numerical simulation of the phonon and quasiparticle dynamics in the aftermath of an impact. We compare the simulations with experimental measurements of phonon-mediated QP poisoning and demonstrate that our modeling captures the spatial and temporal footprint of the QP poisoning for various configurations of phonon downconversion structures. We thus present a path forward for the operation of superconducting quantum processors in the presence of ionizing radiation.
△ Less
Submitted 2 August, 2024; v1 submitted 23 February, 2024;
originally announced February 2024.
-
Quantum-centric Supercomputing for Materials Science: A Perspective on Challenges and Future Directions
Authors:
Yuri Alexeev,
Maximilian Amsler,
Paul Baity,
Marco Antonio Barroca,
Sanzio Bassini,
Torey Battelle,
Daan Camps,
David Casanova,
Young Jai Choi,
Frederic T. Chong,
Charles Chung,
Chris Codella,
Antonio D. Corcoles,
James Cruise,
Alberto Di Meglio,
Jonathan Dubois,
Ivan Duran,
Thomas Eckl,
Sophia Economou,
Stephan Eidenbenz,
Bruce Elmegreen,
Clyde Fare,
Ismael Faro,
Cristina Sanz Fernández,
Rodrigo Neumann Barros Ferreira
, et al. (102 additional authors not shown)
Abstract:
Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of…
▽ More
Computational models are an essential tool for the design, characterization, and discovery of novel materials. Hard computational tasks in materials science stretch the limits of existing high-performance supercomputing centers, consuming much of their simulation, analysis, and data resources. Quantum computing, on the other hand, is an emerging technology with the potential to accelerate many of the computational tasks needed for materials science. In order to do that, the quantum technology must interact with conventional high-performance computing in several ways: approximate results validation, identification of hard problems, and synergies in quantum-centric supercomputing. In this paper, we provide a perspective on how quantum-centric supercomputing can help address critical computational problems in materials science, the challenges to face in order to solve representative use cases, and new suggested directions.
△ Less
Submitted 12 September, 2024; v1 submitted 14 December, 2023;
originally announced December 2023.
-
Characterizing Niobium Nitride Superconducting Microwave Coplanar Waveguide Resonator Array for Circuit Quantum Electrodynamics in Extreme Conditions
Authors:
Paniz Foshat,
Paul Baity,
Sergey Danilin,
Valentino Seferai,
Shima Poorgholam-Khanjari,
Hua Feng,
Oleg A. Mukhanov,
Matthew Hutchings,
Robert H. Hadfield,
Muhammad Imran,
Martin Weides,
Kaveh Delfanazari
Abstract:
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplana…
▽ More
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays, with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor (Qi) decreases from Qi ~ 1.07*10^6 in a high power regime (< nph > = 27000) to Qi ~ 1.36 *10^5 in single photon regime at temperature T = 100 mK. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature dependence internal quality factor and frequency tuning of the coplanar waveguide resonators to characterise the quasiparticle density of NbN. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measure the resonators' resonance frequency and internal quality factor at single photon regime in response to in-plane magnetic fields B||. We verify that Qi stays well above 10^4 up to B|| = 240 mT in the photon number < nph > = 1.8 at T = 100 mK. Our results may pave the way for realising robust microwave superconducting circuits for circuit quantum electrodynamics (cQED) at high magnetic fields necessary for fault-tolerant quantum computing, and ultrasensitive quantum sensing.
△ Less
Submitted 4 June, 2023;
originally announced June 2023.
-
Circle fit optimization for resonator quality factor measurements: point redistribution for maximal accuracy
Authors:
Paul G. Baity,
Connor Maclean,
Valentino Seferai,
Joe Bronstein,
Yi Shu,
Tania Hemakumara,
Martin Weides
Abstract:
The control of material loss mechanisms is playing an increasingly important role for improving coherence times of superconducting quantum devices. Such material losses can be characterized through the measurement of planar superconducting resonators, which reflect losses through the resonance's quality factor $Q_l$. The resonance quality factor consists of both internal (material) losses as well…
▽ More
The control of material loss mechanisms is playing an increasingly important role for improving coherence times of superconducting quantum devices. Such material losses can be characterized through the measurement of planar superconducting resonators, which reflect losses through the resonance's quality factor $Q_l$. The resonance quality factor consists of both internal (material) losses as well as coupling losses when resonance photons escape back into the measurement circuit. The combined losses are then described as $Q_l^{-1} = \mathrm{Re}\{Q_c^{-1}\} + Q_i^{-1}$, where $Q_c$ and $Q_i$ reflect the coupling and internal quality factors of the resonator, respectively. To separate the relative contributions of $Q_i$ and $Q_c$ to $Q_l$, diameter-correcting circle fits use algebraic or geometric means to fit the resonance signal on the complex plane. However, such circle fits can produce varied results, so to address this issue, we use a combination of simulation and experiment to determine the reliability of a fitting algorithm across a wide range of quality factor values from $Q_i\ll Q_c$ to $Q_c\ll Q_i$. In addition, we develop a novel measurement protocol that can not only reduce fitting errors by factors $\gtrsim 2$ but also mitigates the influence of the measurement background on the fit results. This technique can be generalized for other resonance systems beyond superconducting resonators.
△ Less
Submitted 24 November, 2023; v1 submitted 16 January, 2023;
originally announced January 2023.
-
Quantum computing hardware in the cloud: Should a computational chemist care?
Authors:
A. Rossi,
P. G. Baity,
V. M. Schäfer,
M. Weides
Abstract:
Within the last decade much progress has been made in the experimental realisation of quantum computing hardware based on a variety of physical systems. Rapid progress has been fuelled by the conviction that sufficiently powerful quantum machines will herald enormous computational advantages in many fields, including chemical research. A quantum computer capable of simulating the electronic struct…
▽ More
Within the last decade much progress has been made in the experimental realisation of quantum computing hardware based on a variety of physical systems. Rapid progress has been fuelled by the conviction that sufficiently powerful quantum machines will herald enormous computational advantages in many fields, including chemical research. A quantum computer capable of simulating the electronic structures of complex molecules would be a game changer for the design of new drugs and materials. Given the potential implications of this technology, there is a need within the chemistry community to keep abreast with the latest developments as well as becoming involved in experimentation with quantum prototypes. To facilitate this, here we review the types of quantum computing hardware that have been made available to the public through cloud services. We focus on three architectures, namely superconductors, trapped ions and semiconductors. For each one we summarise the basic physical operations, requirements and performance. We discuss to what extent each system has been used for molecular chemistry problems and highlight the most pressing hardware issues to be solved for a chemistry-relevant quantum advantage to eventually emerge.
△ Less
Submitted 31 May, 2021; v1 submitted 5 February, 2021;
originally announced February 2021.
-
Coherent superconducting qubits from a subtractive junction fabrication process
Authors:
Alexander Stehli,
Jan David Brehm,
Tim Wolz,
Paul Baity,
Sergey Danilin,
Valentino Seferai,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides
Abstract:
Josephson tunnel junctions are the centerpiece of almost any superconducting electronic circuit, including qubits. Typically, the junctions for qubits are fabricated using shadow evaporation techniques to reduce dielectric loss contributions from the superconducting film interfaces. In recent years, however, sub-micron scale overlap junctions have started to attract attention. Compared to shadow m…
▽ More
Josephson tunnel junctions are the centerpiece of almost any superconducting electronic circuit, including qubits. Typically, the junctions for qubits are fabricated using shadow evaporation techniques to reduce dielectric loss contributions from the superconducting film interfaces. In recent years, however, sub-micron scale overlap junctions have started to attract attention. Compared to shadow mask techniques, neither an angle dependent deposition nor free-standing bridges or overlaps are needed, which are significant limitations for wafer-scale processing. This comes at the cost of breaking the vacuum during fabrication, but simplifies integration in multi-layered circuits, implementation of vastly different junction sizes, and enables fabrication on a larger scale in an industrially-standardized process. In this work, we demonstrate the feasibility of a subtractive process for fabrication of overlap junctions. In an array of test contacts, we find low aging of the average normal state resistance of only 1.6\% over 6 months. We evaluate the coherence properties of the junctions by employing them in superconducting transmon qubits. In time domain experiments, we find that both, the qubit life- and coherence time of our best device, are on average greater than $20\,\si{\micro\second}$. Finally, we discuss potential improvements to our technique. This work paves the way towards a more standardized process flow with advanced materials and growth processes, and constitutes an important step for large scale fabrication of superconducting quantum circuits.
△ Less
Submitted 28 September, 2020; v1 submitted 30 June, 2020;
originally announced June 2020.
