|
|
|
| Jango Fett
|
|
|
Model BH-412 & BH-62950, Photo by Arturo Delgado, Reggie Montgomery
|
|
|
| Visit the Gallery for this Costume for more models and parts views.
|
|
|
|
For 501st membership, only the requirements in black need to be met.
The Bounty Hunters’ Guild defines an additional optional level of costuming excellence. In the page below, requirements for Level 2, referred to as “Infamous”, are listed in blue. These optional requirements are meant for those who strive to meet the highest level of screen accuracy. Please visit the BHG web site for a full description of these standards.
|
|
|
This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
- This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
- GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
- Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
- Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
- Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.
|
|
|
|
General Construction Notes
- The version of the character represented is based off Star Wars: Episode II "Attack of the Clones".
- All armor is silver in color (except certain areas of the helmet).
- All components closely match the Jango Fett Color Palette. (Jango Fett Color Palette)
- Armor is constructed from rigid materials such as plastic, PVC, fiberglass or metal.
- Armor has the appearance of thickness and depth.
- All weathering closely matches visual references from SW: Episode II "Attack of the Clones".
|
|
|
| Required Costume Components
|
|
The following costume components are present and appear as described below.
|
|
|
|
Helmet
- There are two versions of helmet:
- Dented – A small dent is located to the top wearer’s left of the helmet. This helmet can be worn with the JT-12 “Arena Jetpack” or the Z-6 “Classic Jetpack”.
- Non-Dented – No dent is present and this helmet can ONLY be worn with the Z-6 “Classic Jetpack”.
- Helmet has a dark colored, full one piece "T" visor.
- Helmet has a rangefinder and stalk on the right side.
- The mandibles and head band are a medium blue color.
- The upper cheeks, ear pieces and rangefinder are a darker blue color.
- Both blues match the visual references as closely as possible in similar lighting.
- The dome, lower cheeks, key slot area and the back of the helmet are silver in color.
- The helmet is weathered to match visual references as closely as possible.
- (2) 1/8 inch parallel strips extend around the dome, just above the blue band, and stop on either side of the right earpiece attachment.
- Auto pin-striping is recommended.
- The keyhole slots in the rear of helmet are cut out clean and backed with dark mesh, fabric or screening underneath.
- The ear cap on the rangefinder side of the helmet is attached so that it almost closes the gap between the top and bottom half and so that it sits lower than the piece that's formed into the helmet itself.
|
OPTIONAL Level two certification (if applicable):
- A dark gray or slate blue, vinyl or leather gasket attaches underneath and inside the helmet sealing it to the neck.
- The silver cheeks are rounded at the top, unlike the more tapered cheeks of Boba Fett.
|
|
|
|
Chest Armor
- Consists of collar armor, left and right breast plates, a center diamond and an abdominal plate.
- Left breast plate has two indented horizontal bars.
- The lower one is wider and positioned as shown in visual references.
- Center diamond plate between breast plates has an indented vertical rectangle as shown in visual references.
- Chest Armor attaches securely to the front of the vest with no visual means of attachment.
|
|
|
|
Shoulder Armor
- Shoulder Armor has eight points and curves around the upper arm.
- Armor attaches securely to the shoulders of the vest.
|
|
|
|
Back Armor
- Back Armor encompasses the mid and upper back areas, wrapping over the shoulders and around the sides.
- Back Armor has two rectangular slots, over the shoulder blades, to allow for the Jetpack straps to feed through.
- Back Armor attaches securely to the back of the vest.
|
|
|
|
Flak Vest
- Vest is charcoal grey or dark bluish grey in color.
- Vest is made of leather or similar material.
- Vest allows for the attachment of chest, back, belly, shoulder and collar armor.
- Vest closes down the left side and on the left shoulder.
- Vest has piping on the seams of the neck, shoulder and arm openings.
- Shoulders do not flare outward like wings.
- Back of vest has cut slits to allow the Jetpack harness straps to feed through.
- Vest is long enough to be worn under the girth belt.
|
|
|
|
Flightsuit
- Flightsuit is light "blurple" or slate blue in color.
- Flightsuit is double sleeved with long inner sleeves going under the forearm gauntlets and the shorter outer sleeves stopping just above the elbow.
- The seams of both sleeves run in a frontal line from the shoulder, down the bicep and forearm.
- Knee and Lower Leg Armor attach to the legs.
- Hook and loop fastener or snaps are recommended.
- Pants do not droop over the boots and tighten up around the knees and ankles.
|
OPTIONAL Level two certification (if applicable):
- Flightsuit has button holes on either side of the knee to allow for knee straps to go through and secure inside the pants.
|
|
|
|
Gauntlets
- Gauntlets are hinged on the inside of the forearm and close on the outside.
- Gauntlets have five blue hoses weathered to match visual references as closely as possible.
- Three on the right, two on the left.
- All five hoses are tucked under the short sleeve of the flight suit and attached securely.
- The right gauntlet contains the following components as shown on visual references:
- Two toggle switches on upper outside section.
- Four forward facing darts in front of middle section.
- Two small slightly protruding darts in front of lower section (over wrist opening).
- Larger grappling dart with 1-3 "blades" protruding from side housing
- Two hose connecters at rear of housing and an upper tapering section with a third hose connector.
- The right gauntlet has four square pattern indentations on lower section as shown in visual reference.
- The left gauntlet has a rocket securely attached.
- Left gauntlet has black and silver parallel bands in alternating pattern running the length of the missile.
- The rear cylinder is black in color and the front tapered section is gold with a black point as shown in the visual references.
- The tip of the black point is gold in color.
- The construction of the left gauntlet includes the following details:
- A small silver and black switch on the inside of the section holding the rocket.
- A red LED light behind this switch.
- Two black buttons sitting on top of the flamethrower assembly on the outside of the gauntlet.
- Two vertically stacked nozzles that protrude from the front of the flamethrower assembly.
- Two hose connectors at the rear of the flamethrower assembly.
- Three square pattern indentations on the lower gauntlet section as show in visual references.
|
|
|
|
Gloves
- Gloves are Navy Blue in color.
- Gloves are made of a thin, soft leather or similar material.
- Gloves are long enough to tuck in underneath the gauntlets.
|
|
|
|
Z-6 Classic Jetpack
- Jetpack options include the Z-6 "Classic Pack", or the JT-12 "Arena Pack".
- The standard colors for the jetpack are: medium blue, silver, white, black, yellow-orange, and red.
- Jetpack has the following main components:
- One center tank and two side fuel tanks.
- "Piano Keys" stretching horizontally at the top of the main body on each side of the center raised strip.
- One center missile.
- Two side mounted thrusters / nozzles.
- One beacon light and one stabilizer.
- Jetpack attaches snugly against the Back Armor via two black shoulder straps which exit the Back Armor through two slots located near the shoulder blades.
- All patterns, colors and weathering match visual references as closely as possible.
- Lettering symbols and pin-striping (either hand painted or decals) match visual references as closely as possible.
|
OPTIONAL Level two certification (if applicable):
- Jetpack beacon is illuminated with a white light.
- Jetpack attaches to the harness via two black plastic clips that exit the rear of the Jetpack.
|
|
|
|
JT-12 Arena Pack
- Jetpack options include the Z-6 "Classic Pack", or the JT-12 "Arena Pack".
- The colors for the arena pack are: silver, dark blue and light blue.
- In place of the larger rocket found on the standard jetpack, the arena pack has a smaller cone shaped missile.
- The thrusters are located under the fuel tanks.
- Jetpack attaches snugly against the Back Armor via two black shoulder straps which exit the Back Armor through two slots located near the shoulder blades.
- All patterns, colors and weathering to match visual references as closely as possible.
|
OPTIONAL Level two certification (if applicable):
- Jetpack attaches to the harness via two black plastic clips that exit the rear of the Jetpack.
|
|
|
|
Girth Belt
- Girth Belt is made of leather or similar materials.
- Belt is brown in color.
- Girth Belt is made of horizontal rows of 1/4" braid and is approximately 5" wide.
- Depending on the height of the person.
- Typically (20) to (22) rows of braids constitutes the average size girth belt.
- Belt attaches in rear.
- Heavy duty hook and loop fastener or lacing is recommended for durability.
- Girth Belt has a vertical brown leather loop, approximately three inches wide, covering the rear overlapping belt seam.
|
|
|
|
Ammo Belt
- Ammo Belt is made of leather or a similar sturdy material.
- Belt is brown in color.
Ammo Belt is approximately 2.5 inches wide.
- The end of belt is tapered and overlaps the other end in rear.
- Hook and loop fastener (or similar) attachment is recommended.
- Ammo Belt includes seven equally sized pouches, approximately 2.5 inches wide and 4.5 inches tall, attached to belt by loops.
- A separate vertical loop, approximately 3/4 inches wide, fits over the belt to the wearer's left against the left most pouch.
- Ammo Belt attaches in rear, over the braided belt, and the vertical leather loop.
|
|
|
|
Codpiece
- The codpiece covers the groin area and is triangular in shape.
- A raised section is centered on the cod piece.
- Codpiece is worn under all of the belts.
|
|
|
|
Thigh Armor
- Armor is curved to fit snugly over thighs.
- The "cut in" or concave detail along the top of the armor plate is worn on the outside of the thigh.
- Thigh Armor attaches securely on the thighs of the flightsuit.
|
|
|
|
Holsters
- Holsters are made of leather or similar sturdy material.
- Holsters are brown in color.
- Straps are approximately 1" inch wide and fastened underneath the rear of girth belt and through an angled loop on front, which sits on the Codpiece armor via two brass D rings and a leather (or vinyl) strip, which inserts into the armor loop.
- Straps are adjustable with 1/4 inch brass ball studs.
- Six studs in total are used.
- Two for rear straps, two for front straps and two more for leg straps.
- The shape of the holster matches the general shape of the blasters.
- The opening at the top is angled and slightly flared.
- The bottoms are tapered so that the blasters fit snugly.
|
|
|
|
Knee Armor
- Inner section forms an upside down "F" pattern as shown in reference images.
- Knee Armor has (2) silver colored darts on the outer side of each knee.
- Inner section has an upside down "F shaped pattern".
|
OPTIONAL Level two certification (if applicable):
- Knee Armor attaches securely to the front of the knees over the flightsuit using black nylon straps that enter the sides of the flightsuit, through button holes in the suit.
|
|
|
|
Lower Leg Armor
- Lower leg armor is shaped into an elongated tombstone style.
- A raised center area that tapers from the top to the bottom runs the length of the lower leg armor.
- Lower leg armor is curved to fit around the wearer's lower leg area.
- Lower Leg Armor attaches securely to the front of the shins over the flightsuit.
|
|
|
|
Foot Armor (Boot Caps)
- Boot armor covers the top of the boot, hiding laces if present.
- Boot armor is curved to fit over the boot and has a "tab" on each side.
- Boot armor has black nylon straps that snap on each side of the boot's heals.
- A piece of black leather or leather-like material wraps around the snap, covering it completely.
|
|
|
|
Boots
- Boots are made of black leather.
- Boot sole pattern matches, as closely as possible, to the movie costume.
- Most identifiable features include a high arch pattern on the inside of the sole.
- Four profile "swoops" between the sole and leather upper which is silver in color.
- Boots allow for secure attachment of Foot Armor on top of boot.
|
OPTIONAL Level two certification (if applicable):
- Boots have snaps attached to the sides of the heel area to allow the attachment of the Foot Armor straps.
- Film used boots (Kenneth Cole Pit Crew) or direct replicas with matching soles to above mentioned.
|
|
|
| Optional Accessories
|
|
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
|
|
|
|
Westar 34's
- Based on a scratch-built or a modified commercial toy Westar 34 pistol.
- Pistols are silver or chrome in color with a matte finish on the handles.
|
OPTIONAL Level two certification (if applicable):
- Pistols are machined metal and chrome plated OR are high quality enough to have the appearance of such.
|
|
|
This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.
