|
|
|
| Governor Arihnda Pryce
|
|
|
Model ID-87544 / ID-99889 , Photo by N/A
|
|
|
| Visit the Gallery for this Costume for more models and parts views.
|
|
|
|
Description: Governor Arihnda Pryce
Prefix: ID
Detachment: Imperial Officer Corps
Context: Star Wars Rebels
Arihnda Pryce was a female human who served as Governor of the Lothal sector fourteen years after the rise of the Galactic Empire.
NOTE: Arihnda Pryce Versions
Please note that there are two acceptable versions of the Arihnda Pryce costume. If one variant has already been approved, another variant will still need to be approved by the GML before use.
|
|
|
|
For 501st membership only the requirements in black need to be met.
The Imperial Officer Corps defines additional, optional levels of costuming excellence. In the page below, requirements for Level 2 “Executor” are listed in blue. Requirements for Level 3 “Imperator” are listed in red.
|
|
This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
- This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
- GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
- Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
- Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
- Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.
|
|
|
| Required Costume Components
|
|
The following costume components are present and appear as described below.
|
|
|
|
Hair and Appearance
- Hair is black and short in a bob-cut style.
- Wig or extensions may be utilized if high quality.
- Bangs end above the eyebrows.
- Optional:
- Tight lined black or dark eyeliner on top and bottom of the eye. All other makeup shall appear be natural.
|
OPTIONAL Level two certification (if applicable):
- Eyebrow color is the same as the hair.
- There is dark shading under the eyes.
- Eyebrows are sharply defined and shaped properly.
|
|
|
|
Tunic
- Fabric is a grey medium weight suiting material.
- Double-breasted with a left over right closure on the tapered yoke.
- Yoke comes up across the shoulder to the top shoulder seam.
- The standing collar has square corners.
- Collar closes snugly without visible fasteners and includes a modesty panel behind closure.
- Collar is adorned with two solid black triangular rank insignia.Collar edges are closed with two eye hooks.
- There are code cylinder pockets on both outside panels of the jacket from about half way between the top and bottom on the arm hole.
- Sleeves are long, and without decoration, cuffs or buttons.
- Princess seams in the back of the tunic are acceptable.
- Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric).
|
OPTIONAL Level two certification (if applicable):
- Sleeves contain 2 seams. One seam along the bottom and one along the back of the sleeve.
- Collar is approximately 1.25" (31.8 mm) tall.
- A central seam runs down the back of the tunic, with no princess seams.
- The yoke is void of any decoration or cuts.
- Sleeves contain one seam on the inner arm.
|
|
|
|
Collar Insignia
- There are two black black triangle shaped insignia's one on each side of the collar closure.
- Triangles point inwards toward the closure.
|
OPTIONAL Level two certification (if applicable):
- Insignia is an iron on applique, embroidered or cloth patch, or screen printed.
|
|
|
|
Trousers
- Fabric is a medium weight suiting material exactly matching the tunic and medium grey in color.
- Trousers have narrow stiff flares.
- Pockets are acceptable, although are not visible with the tunic on.
|
OPTIONAL Level two certification (if applicable):
- The flares on the jodhpurs mimic the shape of Pryce's flares.
|
|
|
|
Officer Boots
- Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
- There are no buckles, snap tabs or decoration.
- Boots have conservative heels.
- A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
- Not visible from the front, side or back.
- The top of the boots may be flat or Spanish Style, but not Cowboy or Super Hero (pointed at the front) style.
|
OPTIONAL Level two certification (if applicable):
- Boots do not have stretch panels or a zipper.
|
OPTIONAL Level three certification (if applicable):
- Boots are made of leather.
- Exact replicas of English riding (dress) boots or Equestrian boots.
|
|
|
|
Rank Bar
- Worn on the left side of the tunic over the heart.
- Rank consists of colored plastic tiles mounted on metal or metal looking bar.
- Each bar is approximately 1" (25.4 mm) height.
- Top bar has a small radius on the top right and left corner.
- Bottom bar has a small radius on the bottom right and left corner.
- Six blue tiles on the top bar.
- Three red tiles followed by three yellow tiles on the bottom bar.
|
OPTIONAL Level two certification (if applicable):
- Rank bar is one strip with four rounded corners NOT two separate bars as with OT rank bars; tiles are opaque.
|
|
|
|
Code Cylinders
- (2) Code Cylinders are worn.
- Modified Silver "chalk holder" tube with a short clip and blue top.
- Dosimeter Style: True Dosimeter with correct clip and Blue top.
- Clip is silver in color.
|
OPTIONAL Level two certification (if applicable):
- Must be Rebels style code cylinder with correct Rebels style clip and blue caps.
|
|
|
|
Gloves
- Black, wrist length gloves constructed of a non-textured leather or leather-like material.
- Enclosed fingers.
- No buckles, straps, or other decoration.
|
OPTIONAL Level two certification (if applicable):
- Gloves extend past the wearer's wrist several inches, covering the forearm while reaching or bending the arm.
|
|
|
|
Belt
- The belt is constructed from a non-textured leather or a leather-like material.
- Approximately 2" (50.8 mm) in width no more than approximately 3" (76.2 mm) wide.
- There are no loops on the belt.
- A single large snap or rivet is visible approximately 1" (25.4 mm) to the left of the buckle, snap can be raised to a semi conical shape.
- The buckle is constructed from a horizontally brushed metal, or metal looking material.
- Buckle has a raised metal code disk.
|
OPTIONAL Level two certification (if applicable):
- Belt does not have grooves.
|
|
|
|
Armor, Version Two Only
- This item is worn in conjunction with the Helmet and Holster.
- Officer chest piece is painted medium gray.
- Three knobs on the left side, just next-to the center depression: Red and 2 White.
- Lines on Armour: Right and left side lines run top across down to middle of chest and goes into the raised piece and the left side matches the right side.
- Raised middle piece attached to lights panels on right side
- Double Lines at bottom right side- Open ended rectangle that are closed on inside.
- Double lines at bottom Left side and ending in a point.
Back
- Red and 2 white lights from top to bottom on right side.
- Ribbed shoulder bridges connect the Back and Chest Armor.
- Box is raised off the back piece.
- 2 rear red-light bars.
|
|
|
|
Helmet, Version Two Only
- This item is worn in conjunction with the Holster and Chest Armor.
- Open face helmet consisting of a dome (with rim) and helmet flare.
- The helmet is painted a medium gray.
- 2 Line on top of Helmet. Lines run from Brow to Rim.
- There are 2 clasps for Goggles on both sides of the helmet.
- Clasp is between the top of helmet and the lip of the helmet where it touches the flare.
- Imperial Code Disks are positioned on both sides of the helmet flare.
- Black trim is covering the edge of the helmet skirt and forehead of the dome.
- Inside of the helmet is black.
|
|
|
|
Holster, Version Two Only
- Black in color, made of leather or leatherlike material and attached to the belt.
- This item is worn in conjunction with the Helmet and Chest Armor.
|
|
|
| Optional Accessories
|
|
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
|
|
|
|
Blue Contact Lenses
- Blue contact lenses.
- All persons utilizing contact lenses are encouraged to first see their optometrist for a fitting.
|
|
|
| Optional Accessories
|
|
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
|
|
|
|
Rk-3 Blaster
- Blaster matches details as seen in Rebels.
|
|
|
This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.
