|
|
|
| Grand Admiral Thrawn — Rebels Animated
|
|
Model ID-42010, Photo by Vanya Yount
|
|
|
| Visit the Gallery for this Costume for more models and parts views.
|
|
|
|
Description: Grand Admiral Thrawn — Rebels Animated
Prefix: ID
Detachment: Imperial Officer Corps
Context: Disney's SW Rebels
Grand Admiral Thrawn, military genius and the commander of the Seventh Fleet, oversaw the Galactic Empire's efforts to destroy the rebellion growing in the Lothal sector. He believes in the importance of understanding an enemy's culture, art, and philosophy to defeat them.
|
|
|
|
For 501st membership only the requirements in black need to be met.
The Imperial Officer Corps defines additional, optional levels of costuming excellence. In the page below, requirements for Level 2 “Executor” are listed in blue. Requirements for Level 3 “Imperator” are listed in red.
|
|
This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
- This document is not intended to be a detailed how-to on costume construction; rather a visual guide to be used for 501st costume approval. Details on construction may be found on the respective costume detachment web forum.
- GMLs uncertain about an aspect of submitted costume shall post questions in the appropriate DL/GML peer review section of the Legion forum.
- Measurements given in this document are intended to be approximate and generalized; not criteria for approval.
- Requirements for all 501st costumes are proportional to the wearer in scale, fit and size.
- Text descriptions are only one part of the guideline. GMLs and costumers must consider both text and pictures (CRL and Reference) when reviewing the costume.
|
|
|
| Required Costume Components
|
|
The following costume components are present and appear as described below.
|
|
|
|
Hair and Skin Appearance
- All exposed skin is colored a light to medium blue.
- Hair is dark blue
- The arching widow's peak is combed back at the sides and top. In the back, the hair is off of the neck.
- Makeup is contoured and shaded as to give an angular appearance on the cheeks, forehead, and jaw.
|
OPTIONAL Level two certification (if applicable):
- There is thin line of red shading underneath the eyes, following the bottom eye rim.
- The eyebrows are the same shade as the hair.
|
OPTIONAL Level three certification (if applicable):
- Short sideburns curve toward the cheek and end where the cheek contouring begins.
- Lips have a slight fleshy or pink-grey colored tone under a sheer blue.
|
|
|
|
Tunic, White
- Tunic is made from a medium to heavy weight white suiting material.
- Tunic is double-breasted with a left over right closure on the tapered yoke.
- Yoke comes up across the shoulder to the top shoulder seam.
- The standing collar has square corners, that closes snug, flush, and includes a white modesty panel behind the closure.
- Sleeves are long, and at the bicep there is a seam on each sleeve forming a (U shaped) bell curve.
- Two code cylinder pockets located on the outside breast panels of the tunic intersect the bell curve on the biceps.
- The back of the tunic has two seams that run vertically and parallel to the shoulder seam, meeting the front yoke seam
- Tunic is constructed with no top-stitching (stitches visible on the exterior surface of fabric).
|
OPTIONAL Level two certification (if applicable):
- There is no fitting dart in the center of the yoke.
- Tunic is secured on the right side by snaps or buttons, not using hook and loop fasteners (Velcro).
- Tunic is lined.
|
OPTIONAL Level three certification (if applicable):
- The bicep bell curve seam is demarcated and emphasized more than any other seams in the tunic. (Perhaps by thickening seam allowance, perhaps by utilizing a slot seam.)
- The bicep bell curve seam ends exactly where the code cylinder pocket opening begins.
|
|
|
|
Collar Rank Insignia
- There is a rank Insignia on each collar.
- One bar followed by one outward facing triangle.
- Rank is Grey or Silver, and edged with a black outline.
- Insignia is one of the following: an iron on applique material, embroidered, a cloth patch, or a pin. If a pin is used, it should be fastened flush to the collar.
|
OPTIONAL Level two certification (if applicable):
- Rank Insignia must have very thin and flat appearance.
|
|
|
|
Epaulets
- Dark yellow, yellow-gold or gold colored strips, firmly attached on the edge of each shoulder.
- The strips are matte or metallic in finish and made with a semi-rigid to rigid material.
- Positioned across the collar bone where the shoulder begins, between the shoulder seam and yoke seam.
- The strips do not overlap the seams they sit between.
|
OPTIONAL Level two certification (if applicable):
- The lower limit of the strip, in positioning, should run parallel to the lowest point of the center of the collar.
|
OPTIONAL Level three certification (if applicable):
- Fits perfectly flush to the tunic.
- Have a metallic sheen.
|
|
|
|
Rank Bar
- Worn on the left side of the tunic over the heart.
- Rank consists of two rows of colored plastic tiles mounted on ametal or metal like bar.
- Bottom Row – Three blue, followed by three red tiles.
- Top Row – Three blue, followed by three yellow tiles.
- Bar is one strip with four rounded corners.
- Bar is approximately 5 inches long and 2 inches in height.
- Bar is grey or silver in color and has a metallic sheen.
- Rank tile dimensions are appropriate and proportional to the sizing of the bar to allow for equidistant and even spacing from each other and the border of the bar.
|
OPTIONAL Level two certification (if applicable):
|
|
|
|
Code Cylinders, Rebels
- (4) Code Cylinders, 2 in each pocket.
- Modified Silver "chalk holder" tube with a short clip and blue top.
- Dosimeter Style: True Dosimeter with correct clip and Blue top is also acceptable.
- Clip is silver in color.
|
OPTIONAL Level two certification (if applicable):
- Must be Rebels style code cylinder with correct Rebels style clip and blue caps.
|
|
|
|
Belt
- The belt is constructed from a non-textured leather or a leather-like material.
- Approximately 2" (50.8 mm) and 3" (76.2 mm) wide.
- There are no loops on the belt.
- A single large snap or rivet is visible to the left of the buckle, snap may be raised to a semi conical shape.
- The buckle is constructed from a horizontally brushed metal, or metal looking material.
- Buckle is adorned with a Rebel’s Era Imperial Code Disk off centered at the top.
|
OPTIONAL Level two certification (if applicable):
- Belt does not have grooves.
- Belt is made of leather.
|
|
|
|
Holster
- Black in color and constructed from leather or leather like material.
- When possible the holster is made from same material as the belt.
- Holster has one belt loop, made of the same material as the holster.
- The holster is long enough to extend past the hem of the tunic.
|
OPTIONAL Level two certification (if applicable):
- The Holster is attached to the belt by a 1/2” metal stud.
|
|
|
|
Trousers, White
- Fabric is made from medium to heavy weight white suiting material identical to the tunic.
- Straight legged in style.
- Trousers are worn neatly tucked into boots with no blousing.
- Visible pockets are not allowed.
|
|
|
|
Boots
- Knee-high, black, riding style, lace-less, smooth non-textured, leather or leather-like material.
- There are no buckles, snap tabs or decoration.
- Boots have conservative heels.
- A single stretch panel or zipper may be present, they are to be hidden on the inner part of the boot shaft.
- Not visible from the front, side or back.
- The top of the boots are flat style.
|
OPTIONAL Level two certification (if applicable):
- Boots do not have a zipper.
|
OPTIONAL Level three certification (if applicable):
- Consists of tubular black shin armor sitting over black ankle boots.
- This is similar to that seen on Agent Kallus, but tighter, without the grey strip, and black soles instead of grey.
- No visible means of attachment.
- No visible seam.
- Finish and shade of shin armor and boots must be identical
|
|
|
| Optional Accessories
|
|
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use.
|
|
|
|
Eye Color
- Red theatrical contact lenses.
- While encouraged to complete the look of this character, the contact lens requirement will be waived for 501st acceptance, if the applicant cannot wear contact lenses for health related reasons.
- All persons wishing to utilize contact lenses are encouraged to first see their optometrist for a fitting.
|
OPTIONAL Level two certification (if applicable):
|
|
|
|
Pistol
- Accurate Rebels' Era Imperial Officer's Pistol.
|
|
|
This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.
.jpg)
