Costuming:TB Scout trooper: Difference between revisions
m (Removed protection from "Costuming:TB Scout trooper") |
m (Changed protection level for "Costuming:TB Scout trooper" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
||
(21 intermediate revisions by 4 users not shown) | |||
Line 18: | Line 18: | ||
*Bolts are either flat or have concave centers | *Bolts are either flat or have concave centers | ||
*Helmet is true to the shape of original screen used helmet. | *Helmet is true to the shape of original screen used helmet. | ||
*A return edge is present on the visor. | |||
*Earholes are cut out -- mesh or paint is not acceptable: | *Earholes are cut out -- mesh or paint is not acceptable: | ||
**Area behind earholes inside the helmet is blacked out, either with paint or tape. No interior white should show from the outside of the helmet when worn.| | **Area behind earholes inside the helmet is blacked out, either with paint or tape. No interior white should show from the outside of the helmet when worn.| | ||
Line 24: | Line 25: | ||
**“Sticker” snouts are not acceptable. | **“Sticker” snouts are not acceptable. | ||
*Helmet bolts are [https://origin-wiki.501st.com/mw501/images/9/97/Bolt1.jpg Gray 3M bolts or other replicas] with concave centers. (Visible bolt head diameter of 22mm). | *Helmet bolts are [https://origin-wiki.501st.com/mw501/images/9/97/Bolt1.jpg Gray 3M bolts or other replicas] with concave centers. (Visible bolt head diameter of 22mm). | ||
*Rear lower right of helmet has 7 to 8 indents. | |||
*Optional: For the 'Back and Cap' style bucket constructions, fill the seam around the top of the dome so it is not visible. | *Optional: For the 'Back and Cap' style bucket constructions, fill the seam around the top of the dome so it is not visible. | ||
*Optional: A white chin cup is present in the helmet.|}} | *Optional: A white chin cup is present in the helmet.|}} | ||
Line 30: | Line 32: | ||
{{CRLtemplate-onelevel|File:TB_scout_flightsuit.png|Flight Suit| | {{CRLtemplate-onelevel|File:TB_scout_flightsuit.png|Flight Suit| | ||
*The undersuit is a one or two-piece black textile suit, such as a military flight | *The undersuit is a one or two-piece black textile suit, such as a military flight suit, industrial work clothing (coveralls), or similar suit modified appropriately. | ||
*A [https://origin-wiki.501st.com/mw501/images/a/a2/Collar.png Mandarin-style collar] closure flap covers the neck area | *Collar: | ||
**A [https://origin-wiki.501st.com/mw501/images/a/a2/Collar.png Mandarin-style collar] closure flap covers the neck area; OR | |||
**Collar may be left [https://origin-wiki.501st.com/mw501/images/d/d4/Open_collar_closeup.png open]. | |||
***If collar is left open, trooper's neck must be covered with a black garment such as a neck seal, gaiter or long balaclava. | |||
***Collar must be folded; open mandarin collars are not allowed. | |||
***Neck covering must be worn UNDER the collar. | |||
*A suede or faux suede [https://origin-wiki.501st.com/mw501/images/3/36/Butt_flap.png "butt flap"] attaches above the waist hidden by the cummerbund, rectangular in shape. The flap is slightly narrower than the width of the trooper and stops just above the bottom of the trooper's backside. | *A suede or faux suede [https://origin-wiki.501st.com/mw501/images/3/36/Butt_flap.png "butt flap"] attaches above the waist hidden by the cummerbund, rectangular in shape. The flap is slightly narrower than the width of the trooper and stops just above the bottom of the trooper's backside. | ||
*Suede or faux suede [https://origin-wiki.501st.com/mw501/images/5/57/Thigh_patches_and_straps.png thigh patches] extend over the flight suit crotch and down the front finishing above the knee. | *Suede or faux suede [https://origin-wiki.501st.com/mw501/images/5/57/Thigh_patches_and_straps.png thigh patches] extend over the flight suit crotch and down the front finishing above the knee. | ||
Line 38: | Line 45: | ||
*The suit is free of any visible labels, logos, zippers or pockets.| | *The suit is free of any visible labels, logos, zippers or pockets.| | ||
*Undersuit is tailored to the wearer. | *Undersuit is tailored to the wearer. | ||
*Collar does not extend over the chest armor. | |||
*Thigh straps measure 2 inches wide (50mm). | *Thigh straps measure 2 inches wide (50mm). | ||
*Thigh patches are real suede. | *Thigh patches are real suede. | ||
Line 46: | Line 54: | ||
*Black elastic secures the armor around upper arm. | *Black elastic secures the armor around upper arm. | ||
*These pieces are free of any adornment.| | *These pieces are free of any adornment.| | ||
*Armor is secured around | *Armor is secured around sleeve with a 1/2 inch (12mm) or smaller (e.g. 1/4 inch, elastic cord, etc.) black elastic strap. | ||
*Bottom corners are rounded. | *Bottom corners are rounded. | ||
*Height of shoulder bell approximates screen used sources. | *Height of shoulder bell approximates screen used sources. | ||
Line 56: | Line 64: | ||
*Black elastic is used to secure the armor around upper arm.| | *Black elastic is used to secure the armor around upper arm.| | ||
*Film-accurate "T-bit" detail is mounted to armor. | *Film-accurate "T-bit" detail is mounted to armor. | ||
*Armor is secured around the arm with a 50mm ( 2") black elastic strap.|}} | *Armor is secured around the arm with a 50mm ( 2") black elastic strap.|}} | ||
Line 74: | Line 81: | ||
{{CRLtemplate-onelevel|File:TB_scout_vest.jpg|Vest| | {{CRLtemplate-onelevel|File:TB_scout_vest.jpg|Vest| | ||
*Made out of black, matte finish, heavy weight cotton fabric. | *Made out of black, matte finish, heavy weight cotton fabric. | ||
* | *Sleeves are padded and ribbed. | ||
*The sleeves end just below the bottom edge of the shoulder armor. | *The sleeves end just below the bottom edge of the shoulder armor. | ||
*Vest has a much wider neck opening than the flight suit. | *Vest has a much wider neck opening than the flight suit. | ||
Line 81: | Line 88: | ||
*Optional: Codpiece may be attached to the [https://origin-wiki.501st.com/mw501/images/7/77/Vest_and_codpiece.png front of the vest], with the codpiece strap going between the trooper's legs and connecting to the back of the vest.| | *Optional: Codpiece may be attached to the [https://origin-wiki.501st.com/mw501/images/7/77/Vest_and_codpiece.png front of the vest], with the codpiece strap going between the trooper's legs and connecting to the back of the vest.| | ||
*The vest is separate from the flight suit and cummerbund. | *The vest is separate from the flight suit and cummerbund. | ||
*Vest sleeves have the appearance of being raglan (ie, the connection seam is at the collar of the vest, not the shoulder) | |||
*Vest sleeves do not flare when worn with shoulder bells. | *Vest sleeves do not flare when worn with shoulder bells. | ||
*Vest sleeves extend no further than 1.5 inches past the bottom edge of the shoulder bell.|}} | *Vest sleeves extend no further than 1.5 inches past the bottom edge of the shoulder bell.|}} | ||
Line 91: | Line 99: | ||
*Shoulder bridge covers, covering the join between the front and back of the armor, are made of white cotton webbing or elastic. | *Shoulder bridge covers, covering the join between the front and back of the armor, are made of white cotton webbing or elastic. | ||
**Covers are between .5 inch and 1 inch wide. | **Covers are between .5 inch and 1 inch wide. | ||
*Side under arm chest/back straps are made from | *Side under arm chest/back straps are made from 38mm (1.5") white cotton webbing. | ||
**Optional: Straps may be off-white if using off-white pouches/drop box straps. | **Optional: Straps may be off-white if using off-white pouches/drop box straps. | ||
**Optional: | **Optional: 38mm (1.5 inch) white elastic material is acceptable provided the color matches. | ||
**Optional: Shoulder bridges match color or pouches and drop box straps.|}} | **Optional: Shoulder bridges match color or pouches and drop box straps.|}} | ||
Line 107: | Line 115: | ||
*Only 1, 4 or 6 "rank bars" on tank are acceptable: | *Only 1, 4 or 6 "rank bars" on tank are acceptable: | ||
**If tank has [https://databank.501st.com/mw501/images/6/67/ROTJ_pouches_tank.png extra trapezoid detail] on the center tank pin striping, only 4 thick rank bars are acceptable. | **If tank has [https://databank.501st.com/mw501/images/6/67/ROTJ_pouches_tank.png extra trapezoid detail] on the center tank pin striping, only 4 thick rank bars are acceptable. | ||
*Tank topper detail is secured to the top of the tank with a single silver colored 1/8th (3mm) rivet and visible washer. | *Tank topper detail is secured to the top of the tank with a single silver colored 1/8th (3mm) rivet and [https://origin-wiki.501st.com/mw501/images/3/3e/Tank_greeblie.jpg visible washer]. | ||
*Tank has properly placed 1/8th inch pin striping. | *Tank has properly placed 1/8th inch pin striping. | ||
*Tank has a single silver colored 1/8th (3mm) rivet placed in the [https://databank.501st.com/mw501/images/d/d1/TB_bottom_tank_rivet.jpg bottom center of the tank]. | *Tank has a single silver colored 1/8th (3mm) rivet placed in the [https://databank.501st.com/mw501/images/d/d1/TB_bottom_tank_rivet.jpg bottom center of the tank]. | ||
Line 171: | Line 179: | ||
**Hose is capped off on both sides with two white, circular caps. | **Hose is capped off on both sides with two white, circular caps. | ||
*On either end of hose is a black drill-style belt clip used to attach detonator to main belt. | *On either end of hose is a black drill-style belt clip used to attach detonator to main belt. | ||
*The | *The face of the thermal detonator has a short side and a long side: | ||
** | **On the [https://origin-wiki.501st.com/mw501/images/d/db/Td_configs.jpg long side] is a black rectangular thermal detonator [https://databank.501st.com/mw501/images/f/f4/TB_TD_Greeb.jpeg greeblie], either prongs up or prongs down; | ||
**On the [https://origin-wiki.501st.com/mw501/images/d/db/Td_configs.jpg short side] is a round black greeblie; | |||
**On the | **If thermal detonator face is symmetrical (sides are even), greeblies may go on either side. | ||
*Detonator box is gloss white or semi-gloss and may be lightly weathered.| | *Detonator box is gloss white or semi-gloss and may be lightly weathered.| | ||
*Thermal Detonator end caps are concave and not flat.|}} | *Thermal Detonator end caps are concave and not flat. | ||
*Thermal Detonator face must have a short side and a long side; symmetrical TDs are not permitted.|}} | |||
Line 182: | Line 191: | ||
*Gloss white or semi-gloss and may be lightly weathered. | *Gloss white or semi-gloss and may be lightly weathered. | ||
*Black elastic is used to secure the armor around the leg.| | *Black elastic is used to secure the armor around the leg.| | ||
*Knee armor | *Knee armor strap may be 12mm (1/2 inch) or 20mm (3/4 inch) wide and passes through the side slots of the knee armor. | ||
* | *OPTIONAL: Knee armor has an additional [https://databank.501st.com/mw501/images/7/73/TB_knee_side.jpg upper strap] that is 12mm (1/2 inch) wide and is riveted to the top sides of the knee armor with two (2) 1/8th (3mm) silver-colored rivets.|}} | ||
{{CRLtemplate-onelevel|File:TB_scout_boots.jpeg|Boots| | {{CRLtemplate-onelevel|File:TB_scout_boots.jpeg|Boots| | ||
Line 198: | Line 206: | ||
*The boot sole is a single color with no visible stitching. | *The boot sole is a single color with no visible stitching. | ||
*Boot stitching is white. | *Boot stitching is white. | ||
*Boots that are constructed too wrinkled (i.e not stretched/fitted correctly prior to gluing) or poor in appearance will be refused.|}} | *Boots that are constructed too wrinkled (i.e not stretched/fitted correctly prior to gluing) or poor in appearance will be refused. | ||
*Dogbone ends above the toe strip on both sides. | |||
*The toe strip is approximately 1/2 inch in height. | |||
*Dogbone shape conforms to the original screen used boot; there is a concave curve along the bottom edge.|}} | |||
{{CRLtemplate-onelevel|File:TB_scout_holster.jpeg|Holster| | {{CRLtemplate-onelevel|File:TB_scout_holster.jpeg|Holster| | ||
Line 214: | Line 225: | ||
*Scope eyepiece has stepped circular grooves like the original. | *Scope eyepiece has stepped circular grooves like the original. | ||
*Scope has no actual lens. | *Scope has no actual lens. | ||
*No decals representing cross hairs or similar. | *No decals representing cross hairs or similar.|}} | ||
* | |||
{{CRLtemplate-onelevel|File:TK_anh_stunt_neckseal.jpeg|Neck Seal| | |||
*Black fabric only; no rubberized or leather parts. | |||
*Trapunto-quilted ribbing. | |||
*Conceals the entire neck. | |||
*Must be worn under the collar of the undersuit.| | |||
*Neck seal has a velcro closure. | |||
*Closure is no wider than .5 inches (12mm).|}} | |||
{{CRLtemplate-onelevel|File:Generic-dlt19.jpeg|DLT-19 Heavy Blaster Rifle| | {{CRLtemplate-onelevel|File:Generic-dlt19.jpeg|DLT-19 Heavy Blaster Rifle| |
Revision as of 19:24, 2 August 2023
![]() |
Scout Trooper: Return Of The Jedi |
![]() |
Model TB 16080 , Photo by Marcel Andretzki |
Visit the Gallery for this Costume for more models and parts views. |
![]() |
Description: Scout Trooper Trained to operate in all conditions, Scout Troopers are the Imperial Army's advance eyes in any situation. Sometimes called Biker Scouts for their primary method of transport, the Aratech 74-Z Speeder Bike, Scouts have been deployed in theaters ranging from the sub-freezing temperatures of Hoth to the temperate climates of the moon of Endor. |
This Visual Guide has been reviewed by the detachment staff and the LMO team and is certified for use as a minimum approval guideline for GMLs. GMLs are free to approve this costume type.
|
Required Costume Components | |
The following costume components are present and appear as described below. | |
![]() |
Helmet
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Balaclava
|
|
![]() |
Flight Suit
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Upper Arm Armor
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Vest
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Back Armor
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Thermal Detonator
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Knee Armor
|
OPTIONAL Level two certification (if applicable):
| |
![]() |
Holster
|
OPTIONAL Level two certification (if applicable):
| |
Optional Accessories | |
Items below are optional costume accessories. These items are not required for approval, but if present appear as described below. If adding in an accessory after initial approval, the item still needs to be submitted to local GML for approval before use. | |
|
This document and all of the images within were created by and are the property of the 501st Legion. Other media owned by Lucasfilm Ltd and Disney are used under authorization. All other uses are prohibited. The 501st Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While it is not sponsored by Lucasfilm Ltd., it follows generally accepted ground rules for Star Wars fan groups. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. Copyright and Trademark Lucasfilm Ltd. All rights reserved. Used under authorization.