CopyObject
Creates a copy of an object that is already stored in Amazon S3.
Note
You can store individual objects of up to 5 TB in Amazon S3. You create a copy of your object up to 5 GB in size in a single atomic action using this API. However, to copy an object greater than 5 GB, you must use the multipart upload Upload Part - Copy (UploadPartCopy) API. For more information, see Copy Object Using the REST Multipart Upload API.
You can copy individual objects between general purpose buckets, between directory buckets, and between general purpose buckets and directory buckets.
Note
-
Amazon S3 supports copy operations using Multi-Region Access Points only as a destination when using the Multi-Region Access Point ARN.
-
Directory buckets - For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format
https://bucket_name.s3express-az_id.region.amazonaws.com/key-name
. Path-style requests are not supported. For more information, see Regional and Zonal endpoints in the Amazon S3 User Guide. -
VPC endpoints don't support cross-Region requests (including copies). If you're using VPC endpoints, your source and destination buckets should be in the same AWS Region as your VPC endpoint.
Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account. For more information about how to enable a Region for your account, see Enable or disable a Region for standalone accounts in the AWS Account Management Guide.
Important
Amazon S3 transfer acceleration does not support cross-Region copies. If you request a
cross-Region copy using a transfer acceleration endpoint, you get a 400 Bad
Request
error. For more information, see Transfer
Acceleration.
- Authentication and authorization
-
Alle
CopyObject
requests must be authenticated and signed by using IAM credentials (access key ID and secret access key for the IAM identities). All headers with thex-amz-
prefix, includingx-amz-copy-source
, must be signed. For more information, see REST Authentication.Directory buckets - You must use the IAM credentials to authenticate and authorize your access to the
CopyObject
API operation, instead of using the temporary security credentials through theCreateSession
API operation.AWS CLI or SDKs handles authentication and authorization on your behalf.
- Permissions
-
You must have read access to the source object and write access to the destination bucket.
-
General purpose bucket permissions - You must have permissions in an IAM policy based on the source and destination bucket types in a
CopyObject
operation.-
If the source object is in a general purpose bucket, you must have
s3:GetObject
permission to read the source object that is being copied. -
If the destination bucket is a general purpose bucket, you must have
s3:PutObject
permission to write the object copy to the destination bucket.
-
-
Directory bucket permissions - You must have permissions in a bucket policy or an IAM identity-based policy based on the source and destination bucket types in a
CopyObject
operation.-
If the source object that you want to copy is in a directory bucket, you must have the
s3express:CreateSession
permission in theAction
element of a policy to read the object. By default, the session is in theReadWrite
mode. If you want to restrict the access, you can explicitly set thes3express:SessionMode
condition key toReadOnly
on the copy source bucket. -
If the copy destination is a directory bucket, you must have the
s3express:CreateSession
permission in theAction
element of a policy to write the object to the destination. Thes3express:SessionMode
condition key can't be set toReadOnly
on the copy destination bucket.
For example policies, see Example bucket policies for S3 Express One Zone and AWS Identity and Access Management (IAM) identity-based policies for S3 Express One Zone in the Amazon S3 User Guide.
-
-
- Response and special errors
-
When the request is an HTTP 1.1 request, the response is chunk encoded. When the request is not an HTTP 1.1 request, the response would not contain the
Content-Length
. You always need to read the entire response body to check if the copy succeeds.-
If the copy is successful, you receive a response with information about the copied object.
-
A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. A
200 OK
response can contain either a success or an error.-
If the error occurs before the copy action starts, you receive a standard Amazon S3 error.
-
If the error occurs during the copy operation, the error response is embedded in the
200 OK
response. For example, in a cross-region copy, you may encounter throttling and receive a200 OK
response. For more information, see Resolve the Error 200 response when copying objects to Amazon S3. The 200 OK
status code means the copy was accepted, but it doesn't mean the copy is complete. Another example is when you disconnect from Amazon S3 before the copy is complete, Amazon S3 might cancel the copy and you may receive a200 OK
response. You must stay connected to Amazon S3 until the entire response is successfully received and processed.If you call this API operation directly, make sure to design your application to parse the content of the response and handle it appropriately. If you use AWS SDKs, SDKs handle this condition. The SDKs detect the embedded error and apply error handling per your configuration settings (including automatically retrying the request as appropriate). If the condition persists, the SDKs throw an exception (or, for the SDKs that don't use exceptions, they return an error).
-
-
- Charge
-
The copy request charge is based on the storage class and Region that you specify for the destination object. The request can also result in a data retrieval charge for the source if the source storage class bills for data retrieval. If the copy source is in a different region, the data transfer is billed to the copy source account. For pricing information, see Amazon S3 pricing
. - HTTP Host header syntax
-
Directory buckets - The HTTP Host header syntax is
Bucket_name.s3express-az_id.region.amazonaws.com
.
The following operations are related to CopyObject
:
Request Syntax
PUT /Key+
HTTP/1.1
Host: Bucket
.s3.amazonaws.com
x-amz-acl: ACL
Cache-Control: CacheControl
x-amz-checksum-algorithm: ChecksumAlgorithm
Content-Disposition: ContentDisposition
Content-Encoding: ContentEncoding
Content-Language: ContentLanguage
Content-Type: ContentType
x-amz-copy-source: CopySource
x-amz-copy-source-if-match: CopySourceIfMatch
x-amz-copy-source-if-modified-since: CopySourceIfModifiedSince
x-amz-copy-source-if-none-match: CopySourceIfNoneMatch
x-amz-copy-source-if-unmodified-since: CopySourceIfUnmodifiedSince
Expires: Expires
x-amz-grant-full-control: GrantFullControl
x-amz-grant-read: GrantRead
x-amz-grant-read-acp: GrantReadACP
x-amz-grant-write-acp: GrantWriteACP
x-amz-metadata-directive: MetadataDirective
x-amz-tagging-directive: TaggingDirective
x-amz-server-side-encryption: ServerSideEncryption
x-amz-storage-class: StorageClass
x-amz-website-redirect-location: WebsiteRedirectLocation
x-amz-server-side-encryption-customer-algorithm: SSECustomerAlgorithm
x-amz-server-side-encryption-customer-key: SSECustomerKey
x-amz-server-side-encryption-customer-key-MD5: SSECustomerKeyMD5
x-amz-server-side-encryption-aws-kms-key-id: SSEKMSKeyId
x-amz-server-side-encryption-context: SSEKMSEncryptionContext
x-amz-server-side-encryption-bucket-key-enabled: BucketKeyEnabled
x-amz-copy-source-server-side-encryption-customer-algorithm: CopySourceSSECustomerAlgorithm
x-amz-copy-source-server-side-encryption-customer-key: CopySourceSSECustomerKey
x-amz-copy-source-server-side-encryption-customer-key-MD5: CopySourceSSECustomerKeyMD5
x-amz-request-payer: RequestPayer
x-amz-tagging: Tagging
x-amz-object-lock-mode: ObjectLockMode
x-amz-object-lock-retain-until-date: ObjectLockRetainUntilDate
x-amz-object-lock-legal-hold: ObjectLockLegalHoldStatus
x-amz-expected-bucket-owner: ExpectedBucketOwner
x-amz-source-expected-bucket-owner: ExpectedSourceBucketOwner
URI Request Parameters
The request uses the following URI parameters.
- Bucket
-
The name of the destination bucket.
Directory buckets - When you use this operation with a directory bucket, you must use virtual-hosted-style requests in the format
Bucket_name.s3express-az_id.region.amazonaws.com
. Path-style requests are not supported. Directory bucket names must be unique in the chosen Availability Zone. Bucket names must follow the formatbucket_base_name--az-id--x-s3
(for example,DOC-EXAMPLE-BUCKET--usw2-az1--x-s3
). For information about bucket naming restrictions, see Directory bucket naming rules in the Amazon S3 User Guide.Access points - When you use this action with an access point, you must provide the alias of the access point in place of the bucket name or specify the access point ARN. When using the access point ARN, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the AWS SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
Note
Access points and Object Lambda access points are not supported by directory buckets.
S3 on Outposts - When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com
. When you use this action with S3 on Outposts through the AWS SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.Required: Yes
- Cache-Control
-
Specifies the caching behavior along the request/reply chain.
- Content-Disposition
-
Specifies presentational information for the object. Indicates whether an object should be displayed in a web browser or downloaded as a file. It allows specifying the desired filename for the downloaded file.
- Content-Encoding
-
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
Note
For directory buckets, only the
aws-chunked
value is supported in this header field. - Content-Language
-
The language the content is in.
- Content-Type
-
A standard MIME type that describes the format of the object data.
- Expires
-
The date and time at which the object is no longer cacheable.
- Key
-
The key of the destination object.
Length Constraints: Minimum length of 1.
Required: Yes
- x-amz-acl
-
The canned access control list (ACL) to apply to the object.
When you copy an object, the ACL metadata is not preserved and is set to
privat
by default. Only the owner has full access control. To override the default ACL setting, specify a new ACL when you generate a copy request. For more information, see Using ACLs.If the destination bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept
PUT
requests that don't specify an ACL orPUT
requests that specify bucket owner full control ACLs, such as thebucket-owner-full-control
canned ACL or an equivalent form of this ACL expressed in the XML format. For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.Note
-
If your destination bucket uses the bucket owner enforced setting for Object Ownership, all objects written to the bucket by any account will be owned by the bucket owner.
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
Valid Values:
private | public-read | public-read-write | authenticated-read | aws-exec-read | bucket-owner-read | bucket-owner-full-control
-
- x-amz-checksum-algorithm
-
Indicates the algorithm that you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
When you copy an object, if the source object has a checksum, that checksum value will be copied to the new object by default. If the
CopyObject
request does not include thisx-amz-checksum-algorithm
header, the checksum algorithm will be copied from the source object to the destination object (if it's present on the source object). You can optionally specify a different checksum algorithm to use with thex-amz-checksum-algorithm
header. Unrecognized or unsupported values will respond with the HTTP status code400 Bad Request
.Note
For directory buckets, when you use AWS SDKs,
CRC32
is the default checksum algorithm that's used for performance.Valid Values:
CRC32 | CRC32C | SHA1 | SHA256
- x-amz-copy-source
-
Specifies the source object for the copy operation. The source object can be up to 5 GB. If the source object is an object that was uploaded by using a multipart upload, the object copy will be a single part object after the source object is copied to the destination bucket.
You specify the value of the copy source in one of two formats, depending on whether you want to access the source object through an access point:
-
For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object
reports/january.pdf
from the general purpose bucketawsexamplebucket
, useawsexamplebucket/reports/january.pdf
. The value must be URL-encoded. To copy the objectreports/january.pdf
from the directory bucketawsexamplebucket--use1-az5--x-s3
, useawsexamplebucket--use1-az5--x-s3/reports/january.pdf
. The value must be URL-encoded. -
For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format
arn:aws:s3:<Region>:<account-id>:accesspoint/<access-point-name>/object/<key>
. For example, to copy the objectreports/january.pdf
through access pointmy-access-point
owned by account123456789012
in Regionus-west-2
, use the URL encoding ofarn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf
. The value must be URL encoded.Note
-
Amazon S3 supports copy operations using Access points only when the source and destination buckets are in the same AWS Region.
-
Access points are not supported by directory buckets.
Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format
arn:aws:s3-outposts:<Region>:<account-id>:outpost/<outpost-id>/object/<key>
. For example, to copy the objectreports/january.pdf
through outpostmy-outpost
owned by account123456789012
in Regionus-west-2
, use the URL encoding ofarn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf
. The value must be URL-encoded. -
If your source bucket versioning is enabled, the
x-amz-copy-source
header by default identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use theversionId
query parameter. Specifically, append?versionId=<version-id>
to the value (for example,awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893
). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.If you enable versioning on the destination bucket, Amazon S3 generates a unique version ID for the copied object. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the
x-amz-version-id
response header in the response.If you do not enable versioning or suspend it on the destination bucket, the version ID that Amazon S3 generates in the
x-amz-version-id
response header is always null.Note
Directory buckets - S3 Versioning isn't enabled and supported for directory buckets.
Pattern:
\/.+\/.+
Required: Yes
-
- x-amz-copy-source-if-match
-
Copies the object if its entity tag (ETag) matches the specified tag.
If both the
x-amz-copy-source-if-match
andx-amz-copy-source-if-unmodified-since
headers are present in the request and evaluate as follows, Amazon S3 returns200 OK
and copies the data:-
x-amz-copy-source-if-match
condition evaluates to true -
x-amz-copy-source-if-unmodified-since
condition evaluates to false
-
- x-amz-copy-source-if-modified-since
-
Copies the object if it has been modified since the specified time.
If both the
x-amz-copy-source-if-none-match
andx-amz-copy-source-if-modified-since
headers are present in the request and evaluate as follows, Amazon S3 returns the412 Precondition Failed
response code:-
x-amz-copy-source-if-none-match
condition evaluates to false -
x-amz-copy-source-if-modified-since
condition evaluates to true
-
- x-amz-copy-source-if-none-match
-
Copies the object if its entity tag (ETag) is different than the specified ETag.
If both the
x-amz-copy-source-if-none-match
andx-amz-copy-source-if-modified-since
headers are present in the request and evaluate as follows, Amazon S3 returns the412 Precondition Failed
response code:-
x-amz-copy-source-if-none-match
condition evaluates to false -
x-amz-copy-source-if-modified-since
condition evaluates to true
-
- x-amz-copy-source-if-unmodified-since
-
Copies the object if it hasn't been modified since the specified time.
If both the
x-amz-copy-source-if-match
andx-amz-copy-source-if-unmodified-since
headers are present in the request and evaluate as follows, Amazon S3 returns200 OK
and copies the data:-
x-amz-copy-source-if-match
condition evaluates to true -
x-amz-copy-source-if-unmodified-since
condition evaluates to false
-
- x-amz-copy-source-server-side-encryption-customer-algorithm
-
Specifies the algorithm to use when decrypting the source object (for example,
AES256
).If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
Note
This functionality is not supported when the source object is in a directory bucket.
- x-amz-copy-source-server-side-encryption-customer-key
-
Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be the same one that was used when the source object was created.
If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
Note
This functionality is not supported when the source object is in a directory bucket.
- x-amz-copy-source-server-side-encryption-customer-key-MD5
-
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
If the source object for the copy is stored in Amazon S3 using SSE-C, you must provide the necessary encryption information in your request so that Amazon S3 can decrypt the object for copying.
Note
This functionality is not supported when the source object is in a directory bucket.
- x-amz-expected-bucket-owner
-
The account ID of the expected destination bucket owner. If the account ID that you provide does not match the actual owner of the destination bucket, the request fails with the HTTP status code
403 Forbidden
(access denied). - x-amz-grant-full-control
-
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
Note
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
-
- x-amz-grant-read
-
Allows grantee to read the object data and its metadata.
Note
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
-
- x-amz-grant-read-acp
-
Allows grantee to read the object ACL.
Note
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
-
- x-amz-grant-write-acp
-
Allows grantee to write the ACL for the applicable object.
Note
-
This functionality is not supported for directory buckets.
-
This functionality is not supported for Amazon S3 on Outposts.
-
- x-amz-metadata-directive
-
Specifies whether the metadata is copied from the source object or replaced with metadata that's provided in the request. When copying an object, you can preserve all metadata (the default) or specify new metadata. If this header isn’t specified,
COPY
is the default behavior.General purpose bucket - For general purpose buckets, when you grant permissions, you can use the
s3:x-amz-metadata-directive
condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Amazon S3 condition key examples in the Amazon S3 User Guide.Note
x-amz-website-redirect-location
is unique to each object and is not copied when using thex-amz-metadata-directive
header. To copy the value, you must specifyx-amz-website-redirect-location
in the request header.Valid Values:
COPY | REPLACE
- x-amz-object-lock-legal-hold
-
Specifies whether you want to apply a legal hold to the object copy.
Note
This functionality is not supported for directory buckets.
Valid Values:
ON | OFF
- x-amz-object-lock-mode
-
The Object Lock mode that you want to apply to the object copy.
Note
This functionality is not supported for directory buckets.
Valid Values:
GOVERNANCE | COMPLIANCE
- x-amz-object-lock-retain-until-date
-
The date and time when you want the Object Lock of the object copy to expire.
Note
This functionality is not supported for directory buckets.
- x-amz-request-payer
-
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.
Note
This functionality is not supported for directory buckets.
Valid Values:
requester
- x-amz-server-side-encryption
-
The server-side encryption algorithm used when storing this object in Amazon S3 (for example,
AES256
,aws:kms
,aws:kms:dsse
). Unrecognized or unsupported values won’t write a destination object and will receive a400 Bad Request
response.Amazon S3 automatically encrypts all new objects that are copied to an S3 bucket. When copying an object, if you don't specify encryption information in your copy request, the encryption setting of the target object is set to the default encryption configuration of the destination bucket. By default, all buckets have a base level of encryption configuration that uses server-side encryption with Amazon S3 managed keys (SSE-S3). If the destination bucket has a default encryption configuration that uses server-side encryption with AWS Key Management Service (AWS KMS) keys (SSE-KMS), dual-layer server-side encryption with AWS KMS keys (DSSE-KMS), or server-side encryption with customer-provided encryption keys (SSE-C), Amazon S3 uses the corresponding KMS key, or a customer-provided key to encrypt the target object copy.
When you perform a
CopyObject
operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.With server-side encryption, Amazon S3 encrypts your data as it writes your data to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption in the Amazon S3 User Guide.
Note
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (
AES256
) is supported.Valid Values:
AES256 | aws:kms | aws:kms:dsse
- x-amz-server-side-encryption-aws-kms-key-id
-
Specifies the AWS KMS ID (Key ID, Key ARN, or Key Alias) to use for object encryption. All GET and PUT requests for an object protected by AWS KMS will fail if they're not made via SSL or using SigV4. For information about configuring any of the officially supported AWS SDKs and AWS CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
Note
This functionality is not supported when the destination bucket is a directory bucket.
- x-amz-server-side-encryption-bucket-key-enabled
-
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS Key Management Service (AWS KMS) keys (SSE-KMS). If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object.
Setting this header to
true
causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS. Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
Note
This functionality is not supported when the destination bucket is a directory bucket.
- x-amz-server-side-encryption-context
-
Specifies the AWS KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs. This value must be explicitly added to specify encryption context for
CopyObject
requests.Note
This functionality is not supported when the destination bucket is a directory bucket.
- x-amz-server-side-encryption-customer-algorithm
-
Specifies the algorithm to use when encrypting the object (for example,
AES256
).When you perform a
CopyObject
operation, if you want to use a different type of encryption setting for the target object, you can specify appropriate encryption-related headers to encrypt the target object with an Amazon S3 managed key, a KMS key, or a customer-provided key. If the encryption setting in your request is different from the default encryption configuration of the destination bucket, the encryption setting in your request takes precedence.Note
This functionality is not supported when the destination bucket is a directory bucket.
- x-amz-server-side-encryption-customer-key
-
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded. Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm
header.Note
This functionality is not supported when the destination bucket is a directory bucket.
- x-amz-server-side-encryption-customer-key-MD5
-
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
Note
This functionality is not supported when the destination bucket is a directory bucket.
- x-amz-source-expected-bucket-owner
-
The account ID of the expected source bucket owner. If the account ID that you provide does not match the actual owner of the source bucket, the request fails with the HTTP status code
403 Forbidden
(access denied). - x-amz-storage-class
-
If the
x-amz-storage-class
header is not used, the copied object will be stored in theSTANDARD
Storage Class by default. TheSTANDARD
storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class.Note
-
Directory buckets - For directory buckets, only the S3 Express One Zone storage class is supported to store newly created objects. Unsupported storage class values won't write a destination object and will respond with the HTTP status code
400 Bad Request
. -
Amazon S3 on Outposts - S3 on Outposts only uses the
OUTPOSTS
Storage Class.
You can use the
CopyObject
action to change the storage class of an object that is already stored in Amazon S3 by using thex-amz-storage-class
header. For more information, see Storage Classes in the Amazon S3 User Guide.Before using an object as a source object for the copy operation, you must restore a copy of it if it meets any of the following conditions:
-
The storage class of the source object is
GLACIER
oderDEEP_ARCHIVE
. -
The storage class of the source object is
INTELLIGENT_TIERING
and it's S3 Intelligent-Tiering access tier isArchive Access
oderDeep Archive Access
.
For more information, see RestoreObject and Copying Objects in the Amazon S3 User Guide.
Valid Values:
STANDARD | REDUCED_REDUNDANCY | STANDARD_IA | ONEZONE_IA | INTELLIGENT_TIERING | GLACIER | DEEP_ARCHIVE | OUTPOSTS | GLACIER_IR | SNOW | EXPRESS_ONEZONE
-
- x-amz-tagging
-
The tag-set for the object copy in the destination bucket. This value must be used in conjunction with the
x-amz-tagging-directive
if you chooseREPLACE
for thex-amz-tagging-directive
. If you chooseCOPY
for thex-amz-tagging-directive
, you don't need to set thex-amz-tagging
header, because the tag-set will be copied from the source object directly. The tag-set must be encoded as URL Query parameters.The default value is the empty value.
Note
Directory buckets - For directory buckets in a
CopyObject
operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a501 Not Implemented
status code. When the destination bucket is a directory bucket, you will receive a501 Not Implemented
response in any of the following situations:-
When you attempt to
COPY
the tag-set from an S3 source object that has non-empty tags. -
When you attempt to
REPLACE
the tag-set of a source object and set a non-empty value tox-amz-tagging
. -
When you don't set the
x-amz-tagging-directive
header and the source object has non-empty tags. This is because the default value ofx-amz-tagging-directive
isCOPY
.
Because only the empty tag-set is supported for directory buckets in a
CopyObject
operation, the following situations are allowed:-
When you attempt to
COPY
the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object. -
When you attempt to
REPLACE
the tag-set of a directory bucket source object and set thex-amz-tagging
value of the directory bucket destination object to empty. -
When you attempt to
REPLACE
the tag-set of a general purpose bucket source object that has non-empty tags and set thex-amz-tagging
value of the directory bucket destination object to empty. -
When you attempt to
REPLACE
the tag-set of a directory bucket source object and don't set thex-amz-tagging
value of the directory bucket destination object. This is because the default value ofx-amz-tagging
is the empty value.
-
- x-amz-tagging-directive
-
Specifies whether the object tag-set is copied from the source object or replaced with the tag-set that's provided in the request.
The default value is
COPY
.Note
Directory buckets - For directory buckets in a
CopyObject
operation, only the empty tag-set is supported. Any requests that attempt to write non-empty tags into directory buckets will receive a501 Not Implemented
status code. When the destination bucket is a directory bucket, you will receive a501 Not Implemented
response in any of the following situations:-
When you attempt to
COPY
the tag-set from an S3 source object that has non-empty tags. -
When you attempt to
REPLACE
the tag-set of a source object and set a non-empty value tox-amz-tagging
. -
When you don't set the
x-amz-tagging-directive
header and the source object has non-empty tags. This is because the default value ofx-amz-tagging-directive
isCOPY
.
Because only the empty tag-set is supported for directory buckets in a
CopyObject
operation, the following situations are allowed:-
When you attempt to
COPY
the tag-set from a directory bucket source object that has no tags to a general purpose bucket. It copies an empty tag-set to the destination object. -
When you attempt to
REPLACE
the tag-set of a directory bucket source object and set thex-amz-tagging
value of the directory bucket destination object to empty. -
When you attempt to
REPLACE
the tag-set of a general purpose bucket source object that has non-empty tags and set thex-amz-tagging
value of the directory bucket destination object to empty. -
When you attempt to
REPLACE
the tag-set of a directory bucket source object and don't set thex-amz-tagging
value of the directory bucket destination object. This is because the default value ofx-amz-tagging
is the empty value.
Valid Values:
COPY | REPLACE
-
- x-amz-website-redirect-location
-
If the destination bucket is configured as a website, redirects requests for this object copy to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. This value is unique to each object and is not copied when using the
x-amz-metadata-directive
header. Instead, you may opt to provide this header in combination with thex-amz-metadata-directive
header.Note
This functionality is not supported for directory buckets.
Request Body
The request does not have a request body.
Response Syntax
HTTP/1.1 200
x-amz-expiration: Expiration
x-amz-copy-source-version-id: CopySourceVersionId
x-amz-version-id: VersionId
x-amz-server-side-encryption: ServerSideEncryption
x-amz-server-side-encryption-customer-algorithm: SSECustomerAlgorithm
x-amz-server-side-encryption-customer-key-MD5: SSECustomerKeyMD5
x-amz-server-side-encryption-aws-kms-key-id: SSEKMSKeyId
x-amz-server-side-encryption-context: SSEKMSEncryptionContext
x-amz-server-side-encryption-bucket-key-enabled: BucketKeyEnabled
x-amz-request-charged: RequestCharged
<?xml version="1.0" encoding="UTF-8"?>
<CopyObjectResult>
<ETag>string</ETag>
<LastModified>timestamp</LastModified>
<ChecksumCRC32>string</ChecksumCRC32>
<ChecksumCRC32C>string</ChecksumCRC32C>
<ChecksumSHA1>string</ChecksumSHA1>
<ChecksumSHA256>string</ChecksumSHA256>
</CopyObjectResult>
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The response returns the following HTTP headers.
- x-amz-copy-source-version-id
-
Version ID of the source object that was copied.
Note
This functionality is not supported when the source object is in a directory bucket.
- x-amz-expiration
-
If the object expiration is configured, the response includes this header.
Note
This functionality is not supported for directory buckets.
- x-amz-request-charged
-
If present, indicates that the requester was successfully charged for the request.
Note
This functionality is not supported for directory buckets.
Valid Values:
requester
- x-amz-server-side-encryption
-
The server-side encryption algorithm used when you store this object in Amazon S3 (for example,
AES256
,aws:kms
,aws:kms:dsse
).Note
For directory buckets, only server-side encryption with Amazon S3 managed keys (SSE-S3) (
AES256
) is supported.Valid Values:
AES256 | aws:kms | aws:kms:dsse
- x-amz-server-side-encryption-aws-kms-key-id
-
If present, indicates the ID of the AWS Key Management Service (AWS KMS) symmetric encryption customer managed key that was used for the object.
Note
This functionality is not supported for directory buckets.
- x-amz-server-side-encryption-bucket-key-enabled
-
Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with AWS Key Management Service (AWS KMS) keys (SSE-KMS).
Note
This functionality is not supported for directory buckets.
- x-amz-server-side-encryption-context
-
If present, indicates the AWS KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
Note
This functionality is not supported for directory buckets.
- x-amz-server-side-encryption-customer-algorithm
-
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to confirm the encryption algorithm that's used.
Note
This functionality is not supported for directory buckets.
- x-amz-server-side-encryption-customer-key-MD5
-
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide the round-trip message integrity verification of the customer-provided encryption key.
Note
This functionality is not supported for directory buckets.
- x-amz-version-id
-
Version ID of the newly created copy.
Note
This functionality is not supported for directory buckets.
The following data is returned in XML format by the service.
- CopyObjectResult
-
Root level tag for the CopyObjectResult parameters.
Required: Yes
- ChecksumCRC32
-
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Type: String
- ChecksumCRC32C
-
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Type: String
- ChecksumSHA1
-
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Type: String
- ChecksumSHA256
-
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
Type: String
- ETag
-
Returns the ETag of the new object. The ETag reflects only changes to the contents of an object, not its metadata.
Type: String
- LastModified
-
Creation date of the object.
Type: Timestamp
Errors
- ObjectNotInActiveTierError
-
The source object of the COPY action is not in the active tier and is only stored in Amazon S3 Glacier.
HTTP Status Code: 403
Examples
Sample Request for general purpose buckets
This example copies my-image.jpg
into the bucket
bucket,
with the key name my-second-image.jpg
.
PUT /my-second-image.jpg HTTP/1.1 Host: bucket.s3.<Region>.amazonaws.com Date: Wed, 28 Oct 2009 22:32:00 GMT x-amz-copy-source: /bucket/my-image.jpg Authorization: authorization string
Sample Response for general purpose buckets
This example illustrates one usage of CopyObject.
HTTP/1.1 200 OK x-amz-id-2: eftixk72aD6Ap51TnqcoF8eFidJG9Z/2mkiDFu8yU9AS1ed4OpIszj7UDNEHGran x-amz-request-id: 318BC8BC148832E5 x-amz-copy-source-version-id: 3/L4kqtJlcpXroDTDmJ+rmSpXd3dIbrHY+MTRCxf3vjVBH40Nr8X8gdRQBpUMLUo x-amz-version-id: QUpfdndhfd8438MNFDN93jdnJFkdmqnh893 Date: Wed, 28 Oct 2009 22:32:00 GMT Connection: close Server: AmazonS3 <CopyObjectResult> <LastModified>2009-10-12T17:50:30.000Z</LastModified> <ETag>"9b2cf535f27731c974343645a3985328"</ETag> </CopyObjectResult>
Sample Request for general purpose buckets: Copying a specified version of an object
The following request copies the my-image.jpg
key with the specified
version ID, copies it into the bucket
bucket, and gives it the
my-second-image.jpg
key.
PUT /my-second-image.jpg HTTP/1.1 Host: bucket.s3.<Region>.amazonaws.com Date: Wed, 28 Oct 2009 22:32:00 GMT x-amz-copy-source: /bucket/my-image.jpg?versionId=3/L4kqtJlcpXroDTDmJ+rmSpXd3dIbrHY+MTRCxf3vjVBH40Nr8X8gdRQBpUMLUo Authorization: authorization string
Success Response for general purpose buckets: Copying a versioned object into a version-enabled bucket
The following response shows that an object was copied into a target bucket where versioning is enabled.
HTTP/1.1 200 OK x-amz-id-2: eftixk72aD6Ap51TnqcoF8eFidJG9Z/2mkiDFu8yU9AS1ed4OpIszj7UDNEHGran x-amz-request-id: 318BC8BC148832E5 x-amz-version-id: QUpfdndhfd8438MNFDN93jdnJFkdmqnh893 x-amz-copy-source-version-id: 09df8234529fjs0dfi0w52935029wefdj Date: Wed, 28 Oct 2009 22:32:00 GMT Connection: close Server: AmazonS3 <?xml version="1.0" encoding="UTF-8"?> <CopyObjectResult> <LastModified>2009-10-12T17:50:30.000Z</LastModified> <ETag>"9b2cf535f27731c974343645a3985328"</ETag> </CopyObjectResult>
Success Response for general purpose buckets: Copying a versioned object into a version-suspended bucket
The following response shows that an object was copied into a target bucket where
versioning is suspended. The parameter VersionId
does not appear.
HTTP/1.1 200 OK x-amz-id-2: eftixk72aD6Ap51TnqcoF8eFidJG9Z/2mkiDFu8yU9AS1ed4OpIszj7UDNEHGran x-amz-request-id: 318BC8BC148832E5 x-amz-copy-source-version-id: 3/L4kqtJlcpXroDTDmJ+rmSpXd3dIbrHY+MTRCxf3vjVBH40Nr8X8gdRQBpUMLUo Date: Wed, 28 Oct 2009 22:32:00 GMT Connection: close Server: AmazonS3 <?xml version="1.0" encoding="UTF-8"?> <CopyObjectResult> <LastModified>2009-10-28T22:32:00</LastModified> <ETag>"9b2cf535f27731c974343645a3985328"</ETag> </CopyObjectResult>
Sample Request for general purpose buckets: Copy from unencrypted object to an object encrypted with server-side encryption with customer-provided encryption keys
The following example specifies the HTTP PUT header to copy an unencrypted object to an object encrypted with server-side encryption with customer-provided encryption keys (SSE-C).
PUT /exampleDestinationObject HTTP/1.1 Host: example-destination-bucket.s3.<Region>.amazonaws.com x-amz-server-side-encryption-customer-algorithm: AES256 x-amz-server-side-encryption-customer-key: Base64(YourKey) x-amz-server-side-encryption-customer-key-MD5 : Base64(MD5(YourKey)) x-amz-metadata-directive: metadata_directive x-amz-copy-source: /example_source_bucket/exampleSourceObject x-amz-copy-source-if-match: etag x-amz-copy-source-if-none-match: etag x-amz-copy-source-if-unmodified-since: time_stamp x-amz-copy-source-if-modified-since: time_stamp <request metadata> Authorization: authorization string (see Authenticating Requests (AWS Signature Version 4)) Date: date
Sample Request for general purpose buckets: Copy from an object encrypted with SSE-C to an object encrypted with SSE-C
The following example specifies the HTTP PUT header to copy an object encrypted with server-side encryption with customer-provided encryption keys to an object encrypted with server-side encryption with customer-provided encryption keys for key rotation.
PUT /exampleDestinationObject HTTP/1.1 Host: example-destination-bucket.s3.<Region>.amazonaws.com x-amz-server-side-encryption-customer-algorithm: AES256 x-amz-server-side-encryption-customer-key: Base64(NewKey) x-amz-server-side-encryption-customer-key-MD5: Base64(MD5(NewKey)) x-amz-metadata-directive: metadata_directive x-amz-copy-source: /source_bucket/sourceObject x-amz-copy-source-if-match: etag x-amz-copy-source-if-none-match: etag x-amz-copy-source-if-unmodified-since: time_stamp x-amz-copy-source-if-modified-since: time_stamp x-amz-copy-source-server-side-encryption-customer-algorithm: AES256 x-amz-copy-source-server-side-encryption-customer-key: Base64(OldKey) x-amz-copy-source-server-side-encryption-customer-key-MD5: Base64(MD5(OldKey)) <request metadata> Authorization: authorization string (see Authenticating Requests (AWS Signature Version 4)) Date: date
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following: