© 2018-2021 The original authors.
Copies of this document may be made for your own use and for distribution to others, provided that you do not charge any fee for such copies and further provided that each copy contains this Copyright Notice, whether distributed in print or electronically. |
Preface
The Spring Data JDBC project applies core Spring concepts to the development of solutions that use JDBC databases aligned with Domain-driven design principles. We provide a “template” as a high-level abstraction for storing and querying aggregates.
This document is the reference guide for Spring Data JDBC Support. It explains the concepts and semantics and syntax..
This section provides some basic introduction. The rest of the document refers only to Spring Data JDBC features and assumes the user is familiar with SQL and Spring concepts.
1. Learning Spring
Spring Data uses Spring framework’s core functionality, including:
While you need not know the Spring APIs, understanding the concepts behind them is important. At a minimum, the idea behind Inversion of Control (IoC) should be familiar, and you should be familiar with whatever IoC container you choose to use.
The core functionality of the JDBC Aggregate support can be used directly, with no need to invoke the IoC services of the Spring Container.
This is much like JdbcTemplate
, which can be used "'standalone'" without any other services of the Spring container.
To leverage all the features of Spring Data JDBC, such as the repository support, you need to configure some parts of the library to use Spring.
To learn more about Spring, you can refer to the comprehensive documentation that explains the Spring Framework in detail. There are a lot of articles, blog entries, and books on the subject. See the Spring framework home page for more information.
2. Requirements
The Spring Data JDBC binaries require JDK level 8.0 and above and Spring Framework 5.3.10 and above.
In terms of databases, Spring Data JDBC requires a dialect to abstract common SQL functionality over vendor-specific flavours. Spring Data JDBC includes direct support for the following databases:
-
DB2
-
H2
-
HSQLDB
-
MariaDB
-
Microsoft SQL Server
-
MySQL
-
Oracle
-
Postgres
If you use a different database then your application won’t startup. The dialect section contains further detail on how to proceed in such case.
3. Additional Help Resources
Learning a new framework is not always straightforward. In this section, we try to provide what we think is an easy-to-follow guide for starting with the Spring Data JDBC module. However, if you encounter issues or you need advice, feel free to use one of the following links:
- Community Forum
-
Spring Data on Stack Overflow is a tag for all Spring Data (not just Document) users to share information and help each other. Note that registration is needed only for posting.
- Professional Support
-
Professional, from-the-source support, with guaranteed response time, is available from Pivotal Sofware, Inc., the company behind Spring Data and Spring.
4. Following Development
For information on the Spring Data JDBC source code repository, nightly builds, and snapshot artifacts, see the Spring Data JDBC homepage. You can help make Spring Data best serve the needs of the Spring community by interacting with developers through the Community on Stack Overflow. If you encounter a bug or want to suggest an improvement, please create a ticket on the Spring Data issue tracker. To stay up to date with the latest news and announcements in the Spring eco system, subscribe to the Spring Community Portal. You can also follow the Spring blog or the project team on Twitter (SpringData).
5. Project Metadata
-
Release repository: https://repo.spring.io/libs-release
-
Milestone repository: https://repo.spring.io/libs-milestone
-
Snapshot repository: https://repo.spring.io/libs-snapshot
6. New & Noteworthy
This section covers the significant changes for each version.
6.1. What’s New in Spring Data JDBC 2.3
-
Support for streaming results.
-
Support for specifying projection types as the return type or using generics and providing a Class parameter to query methods.
6.2. What’s New in Spring Data JDBC 2.2
-
Page
andSlice
support for derived queries.
6.3. What’s New in Spring Data JDBC 2.1
-
Dialect for Oracle databases.
-
Support for
@Value
in persistence constructors.
6.4. What’s New in Spring Data JDBC 2.0
-
Optimistic Locking support.
-
Support for
PagingAndSortingRepository
. -
Full Support for H2.
-
All SQL identifiers know get quoted by default.
-
Missing columns no longer cause exceptions.
6.5. What’s New in Spring Data JDBC 1.1
-
@Embedded
entities support. -
Store
byte[]
asBINARY
. -
Dedicated
insert
method in theJdbcAggregateTemplate
. -
Read only property support.
6.6. What’s New in Spring Data JDBC 1.0
-
Basic support for
CrudRepository
. -
@Query
support. -
MyBatis support.
-
Id generation.
-
Event support.
-
Auditing.
-
CustomConversions
.
Unresolved directive in index.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/dependencies.adoc[leveloffset=+1] Unresolved directive in index.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/repositories.adoc[leveloffset=+1]
Reference Documentation
7. JDBC Repositories
This chapter points out the specialties for repository support for JDBC.This builds on the core repository support explained in [repositories]. You should have a sound understanding of the basic concepts explained there.
7.1. Why Spring Data JDBC?
The main persistence API for relational databases in the Java world is certainly JPA, which has its own Spring Data module. Why is there another one?
JPA does a lot of things in order to help the developer. Among other things, it tracks changes to entities. It does lazy loading for you. It lets you map a wide array of object constructs to an equally wide array of database designs.
This is great and makes a lot of things really easy. Just take a look at a basic JPA tutorial. But it often gets really confusing as to why JPA does a certain thing. Also, things that are really simple conceptually get rather difficult with JPA.
Spring Data JDBC aims to be much simpler conceptually, by embracing the following design decisions:
-
If you load an entity, SQL statements get run. Once this is done, you have a completely loaded entity. No lazy loading or caching is done.
-
If you save an entity, it gets saved. If you do not, it does not. There is no dirty tracking and no session.
-
There is a simple model of how to map entities to tables. It probably only works for rather simple cases. If you do not like that, you should code your own strategy. Spring Data JDBC offers only very limited support for customizing the strategy with annotations.
7.2. Domain Driven Design and Relational Databases.
All Spring Data modules are inspired by the concepts of “repository”, “aggregate”, and “aggregate root” from Domain Driven Design. These are possibly even more important for Spring Data JDBC, because they are, to some extent, contrary to normal practice when working with relational databases.
An aggregate is a group of entities that is guaranteed to be consistent between atomic changes to it.
A classic example is an Order
with OrderItems
.
A property on Order
(for example, numberOfItems
is consistent with the actual number of OrderItems
) remains consistent as changes are made.
References across aggregates are not guaranteed to be consistent at all times. They are guaranteed to become consistent eventually.
Each aggregate has exactly one aggregate root, which is one of the entities of the aggregate. The aggregate gets manipulated only through methods on that aggregate root. These are the atomic changes mentioned earlier.
A repository is an abstraction over a persistent store that looks like a collection of all the aggregates of a certain type.
For Spring Data in general, this means you want to have one Repository
per aggregate root.
In addition, for Spring Data JDBC this means that all entities reachable from an aggregate root are considered to be part of that aggregate root.
Spring Data JDBC assumes that only the aggregate has a foreign key to a table storing non-root entities of the aggregate and no other entity points toward non-root entities.
In the current implementation, entities referenced from an aggregate root are deleted and recreated by Spring Data JDBC. |
You can overwrite the repository methods with implementations that match your style of working and designing your database.
7.3. Getting Started
An easy way to bootstrap setting up a working environment is to create a Spring-based project in STS or from Spring Initializr.
First, you need to set up a running database server. Refer to your vendor documentation on how to configure your database for JDBC access.
To create a Spring project in STS:
-
Go to File → New → Spring Template Project → Simple Spring Utility Project, and press Yes when prompted. Then enter a project and a package name, such as
org.spring.jdbc.example
. -
Add the following to the
pom.xml
filesdependencies
element:<dependencies> <!-- other dependency elements omitted --> <dependency> <groupId>org.springframework.data</groupId> <artifactId>spring-data-jdbc</artifactId> <version>2.3.0-SNAPSHOT</version> </dependency> </dependencies>
-
Change the version of Spring in the pom.xml to be
<spring.framework.version>5.3.10</spring.framework.version>
-
Add the following location of the Spring Milestone repository for Maven to your
pom.xml
such that it is at the same level of your<dependencies/>
element:<repositories> <repository> <id>spring-milestone</id> <name>Spring Maven MILESTONE Repository</name> <url>https://repo.spring.io/libs-milestone</url> </repository> </repositories>
The repository is also browseable here.
7.4. Examples Repository
There is a GitHub repository with several examples that you can download and play around with to get a feel for how the library works.
7.5. Annotation-based Configuration
The Spring Data JDBC repositories support can be activated by an annotation through Java configuration, as the following example shows:
@Configuration
@EnableJdbcRepositories (1)
class ApplicationConfig extends AbstractJdbcConfiguration { (2)
@Bean
DataSource dataSource() { (3)
EmbeddedDatabaseBuilder builder = new EmbeddedDatabaseBuilder();
return builder.setType(EmbeddedDatabaseType.HSQL).build();
}
@Bean
NamedParameterJdbcOperations namedParameterJdbcOperations(DataSource dataSource) { (4)
return new NamedParameterJdbcTemplate(dataSource);
}
@Bean
TransactionManager transactionManager(DataSource dataSource) { (5)
return new DataSourceTransactionManager(dataSource);
}
}
1 | @EnableJdbcRepositories creates implementations for interfaces derived from Repository |
2 | AbstractJdbcConfiguration provides various default beans required by Spring Data JDBC |
3 | Creates a DataSource connecting to a database.
This is required by the following two bean methods. |
4 | Creates the NamedParameterJdbcOperations used by Spring Data JDBC to access the database. |
5 | Spring Data JDBC utilizes the transaction management provided by Spring JDBC. |
The configuration class in the preceding example sets up an embedded HSQL database by using the EmbeddedDatabaseBuilder
API of spring-jdbc
.
The DataSource
is then used to set up NamedParameterJdbcOperations
and a TransactionManager
.
We finally activate Spring Data JDBC repositories by using the @EnableJdbcRepositories
.
If no base package is configured, it uses the package in which the configuration class resides.
Extending AbstractJdbcConfiguration
ensures various beans get registered.
Overwriting its methods can be used to customize the setup (see below).
This configuration can be further simplified by using Spring Boot.
With Spring Boot a DataSource
is sufficient once the starter spring-boot-starter-data-jdbc
is included in the dependencies.
Everything else is done by Spring Boot.
There are a couple of things one might want to customize in this setup.
7.5.1. Dialects
Spring Data JDBC uses implementations of the interface Dialect
to encapsulate behavior that is specific to a database or its JDBC driver.
By default, the AbstractJdbcConfiguration
tries to determine the database in use and register the correct Dialect
.
This behavior can be changed by overwriting jdbcDialect(NamedParameterJdbcOperations)
.
If you use a database for which no dialect is available, then your application won’t startup. In that case, you’ll have to ask your vendor to provide a Dialect
implementation. Alternatively, you can:
-
Implement your own
Dialect
. -
Implement a
JdbcDialectProvider
returning theDialect
. -
Register the provider by creating a
spring.factories
resource underMETA-INF
and perform the registration by adding a line
org.springframework.data.jdbc.repository.config.DialectResolver$JdbcDialectProvider=<fully qualified name of your JdbcDialectProvider>
7.6. Persisting Entities
Saving an aggregate can be performed with the CrudRepository.save(…)
method.
If the aggregate is new, this results in an insert for the aggregate root, followed by insert statements for all directly or indirectly referenced entities.
If the aggregate root is not new, all referenced entities get deleted, the aggregate root gets updated, and all referenced entities get inserted again. Note that whether an instance is new is part of the instance’s state.
This approach has some obvious downsides. If only few of the referenced entities have been actually changed, the deletion and insertion is wasteful. While this process could and probably will be improved, there are certain limitations to what Spring Data JDBC can offer. It does not know the previous state of an aggregate. So any update process always has to take whatever it finds in the database and make sure it converts it to whatever is the state of the entity passed to the save method. |
Unresolved directive in jdbc.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/object-mapping.adoc[leveloffset=+2]
7.6.1. Supported Types in Your Entity
The properties of the following types are currently supported:
-
All primitive types and their boxed types (
int
,float
,Integer
,Float
, and so on) -
Enums get mapped to their name.
-
String
-
java.util.Date
,java.time.LocalDate
,java.time.LocalDateTime
, andjava.time.LocalTime
-
Arrays and Collections of the types mentioned above can be mapped to columns of array type if your database supports that.
-
Anything your database driver accepts.
-
References to other entities. They are considered a one-to-one relationship, or an embedded type. It is optional for one-to-one relationship entities to have an
id
attribute. The table of the referenced entity is expected to have an additional column named the same as the table of the referencing entity. You can change this name by implementingNamingStrategy.getReverseColumnName(PersistentPropertyPathExtension path)
. Embedded entities do not need anid
. If one is present it gets ignored. -
Set<some entity>
is considered a one-to-many relationship. The table of the referenced entity is expected to have an additional column named the same as the table of the referencing entity. You can change this name by implementingNamingStrategy.getReverseColumnName(PersistentPropertyPathExtension path)
. -
Map<simple type, some entity>
is considered a qualified one-to-many relationship. The table of the referenced entity is expected to have two additional columns: One named the same as the table of the referencing entity for the foreign key and one with the same name and an additional_key
suffix for the map key. You can change this behavior by implementingNamingStrategy.getReverseColumnName(PersistentPropertyPathExtension path)
andNamingStrategy.getKeyColumn(RelationalPersistentProperty property)
, respectively. Alternatively you may annotate the attribute with@MappedCollection(idColumn="your_column_name", keyColumn="your_key_column_name")
-
List<some entity>
is mapped as aMap<Integer, some entity>
.
The handling of referenced entities is limited. This is based on the idea of aggregate roots as described above. If you reference another entity, that entity is, by definition, part of your aggregate. So, if you remove the reference, the previously referenced entity gets deleted. This also means references are 1-1 or 1-n, but not n-1 or n-m.
If you have n-1 or n-m references, you are, by definition, dealing with two separate aggregates.
References between those may be encoded as simple id
values, which map properly with Spring Data JDBC.
A better way to encode these is to make them instances of AggregateReference
.
An AggregateReference
is a wrapper around an id value which marks that value as a reference to a different aggregate.
Also, the type of that aggregate is encoded in a type parameter.
AggregateReference
class Person {
@Id long id;
AggregateReference<Person, Long> bestFriend;
}
// ...
Person p1, p2 = // some initialization
p1.bestFriend = AggregateReference.to(p2.id);
7.6.2. NamingStrategy
When you use the standard implementations of CrudRepository
that Spring Data JDBC provides, they expect a certain table structure.
You can tweak that by providing a NamingStrategy
in your application context.
7.6.3. Custom table names
When the NamingStrategy does not matching on your database table names, you can customize the names with the @Table
annotation.
The element value
of this annotation provides the custom table name.
The following example maps the MyEntity
class to the CUSTOM_TABLE_NAME
table in the database:
@Table("CUSTOM_TABLE_NAME")
class MyEntity {
@Id
Integer id;
String name;
}
7.6.4. Custom column names
When the NamingStrategy does not matching on your database column names, you can customize the names with the @Column
annotation.
The element value
of this annotation provides the custom column name.
The following example maps the name
property of the MyEntity
class to the CUSTOM_COLUMN_NAME
column in the database:
class MyEntity {
@Id
Integer id;
@Column("CUSTOM_COLUMN_NAME")
String name;
}
The @MappedCollection
annotation can be used on a reference type (one-to-one relationship) or on Sets, Lists, and Maps (one-to-many relationship).
idColumn
element of the annotation provides a custom name for the foreign key column referencing the id column in the other table.
In the following example the corresponding table for the MySubEntity
class has a NAME
column, and the CUSTOM_MY_ENTITY_ID_COLUMN_NAME
column of the MyEntity
id for relationship reasons:
class MyEntity {
@Id
Integer id;
@MappedCollection(idColumn = "CUSTOM_MY_ENTITY_ID_COLUMN_NAME")
Set<MySubEntity> subEntities;
}
class MySubEntity {
String name;
}
When using List
and Map
you must have an additional column for the position of a dataset in the List
or the key value of the entity in the Map
.
This additional column name may be customized with the keyColumn
Element of the @MappedCollection
annotation:
class MyEntity {
@Id
Integer id;
@MappedCollection(idColumn = "CUSTOM_COLUMN_NAME", keyColumn = "CUSTOM_KEY_COLUMN_NAME")
List<MySubEntity> name;
}
class MySubEntity {
String name;
}
7.6.5. Embedded entities
Embedded entities are used to have value objects in your java data model, even if there is only one table in your database.
In the following example you see, that MyEntity
is mapped with the @Embedded
annotation.
The consequence of this is, that in the database a table my_entity
with the two columns id
and name
(from the EmbeddedEntity
class) is expected.
However, if the name
column is actually null
within the result set, the entire property embeddedEntity
will be set to null according to the onEmpty
of @Embedded
, which null
s objects when all nested properties are null
.
Opposite to this behavior USE_EMPTY
tries to create a new instance using either a default constructor or one that accepts nullable parameter values from the result set.
class MyEntity {
@Id
Integer id;
@Embedded(onEmpty = USE_NULL) (1)
EmbeddedEntity embeddedEntity;
}
class EmbeddedEntity {
String name;
}
1 | Null s embeddedEntity if name in null .
Use USE_EMPTY to instantiate embeddedEntity with a potential null value for the name property. |
If you need a value object multiple times in an entity, this can be achieved with the optional prefix
element of the @Embedded
annotation.
This element represents a prefix and is prepend for each column name in the embedded object.
Make use of the shortcuts
|
Embedded entities containing a Collection
or a Map
will always be considered non empty since they will at least contain the empty collection or map.
Such an entity will therefore never be null
even when using @Embedded(onEmpty = USE_NULL).
Unresolved directive in jdbc.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/is-new-state-detection.adoc[leveloffset=+2]
7.6.6. ID Generation
Spring Data JDBC uses the ID to identify entities.
The ID of an entity must be annotated with Spring Data’s @Id
annotation.
When your data base has an auto-increment column for the ID column, the generated value gets set in the entity after inserting it into the database.
One important constraint is that, after saving an entity, the entity must not be new any more.
Note that whether an entity is new is part of the entity’s state.
With auto-increment columns, this happens automatically, because the ID gets set by Spring Data with the value from the ID column.
If you are not using auto-increment columns, you can use a BeforeSave
listener, which sets the ID of the entity (covered later in this document).
7.6.7. Optimistic Locking
Spring Data JDBC supports optimistic locking by means of a numeric attribute that is annotated with
@Version
on the aggregate root.
Whenever Spring Data JDBC saves an aggregate with such a version attribute two things happen:
The update statement for the aggregate root will contain a where clause checking that the version stored in the database is actually unchanged.
If this isn’t the case an OptimisticLockingFailureException
will be thrown.
Also the version attribute gets increased both in the entity and in the database so a concurrent action will notice the change and throw an OptimisticLockingFailureException
if applicable as described above.
This process also applies to inserting new aggregates, where a null
oder 0
version indicates a new instance and the increased instance afterwards marks the instance as not new anymore, making this work rather nicely with cases where the id is generated during object construction for example when UUIDs are used.
During deletes the version check also applies but no version is increased.
7.7. Query Methods
This section offers some specific information about the implementation and use of Spring Data JDBC.
Most of the data access operations you usually trigger on a repository result in a query being run against the databases. Defining such a query is a matter of declaring a method on the repository interface, as the following example shows:
interface PersonRepository extends PagingAndSortingRepository<Person, String> {
List<Person> findByFirstname(String firstname); (1)
List<Person> findByFirstnameOrderByLastname(String firstname, Pageable pageable); (2)
Slice<Person> findByLastname(String lastname, Pageable pageable); (3)
Page<Person> findByLastname(String lastname, Pageable pageable); (4)
Person findByFirstnameAndLastname(String firstname, String lastname); (5)
Person findFirstByLastname(String lastname); (6)
@Query("SELECT * FROM person WHERE lastname = :lastname")
List<Person> findByLastname(String lastname); (7)
@Query("SELECT * FROM person WHERE lastname = :lastname")
Stream<Person> streamByLastname(String lastname); (8)
}
1 | The method shows a query for all people with the given lastname .
The query is derived by parsing the method name for constraints that can be concatenated with And and Or .
Thus, the method name results in a query expression of SELECT … FROM person WHERE firstname = :firstname . |
2 | Use Pageable to pass offset and sorting parameters to the database. |
3 | Return a Slice<Person> . Selects LIMIT+1 rows to determine whether there’s more data to consume. ResultSetExtractor customization is not supported. |
4 | Run a paginated query returning Page<Person> . Selects only data within the given page bounds and potentially a count query to determine the total count. ResultSetExtractor customization is not supported. |
5 | Find a single entity for the given criteria.
It completes with IncorrectResultSizeDataAccessException on non-unique results. |
6 | In contrast to <3>, the first entity is always emitted even if the query yields more result documents. |
7 | The findByLastname method shows a query for all people with the given last name. |
8 | The streamByLastname method returns a Stream , which makes values possible as soon as they are returned from the database. |
The following table shows the keywords that are supported for query methods:
Keyword | Sample | Logical result |
---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Query derivation is limited to properties that can be used in a WHERE clause without using joins.
|
7.7.1. Query Lookup Strategies
The JDBC module supports defining a query manually as a String in a @Query
annotation or as named query in a property file.
Deriving a query from the name of the method is is currently limited to simple properties, that means properties present in the aggregate root directly. Also, only select queries are supported by this approach.
7.7.2. Using @Query
The following example shows how to use @Query
to declare a query method:
interface UserRepository extends CrudRepository<User, Long> {
@Query("select firstName, lastName from User u where u.emailAddress = :email")
User findByEmailAddress(@Param("email") String email);
}
For converting the query result into entities the same RowMapper
is used by default as for the queries Spring Data JDBC generates itself.
The query you provide must match the format the RowMapper
expects.
Columns for all properties that are used in the constructor of an entity must be provided.
Columns for properties that get set via setter, wither or field access are optional.
Properties that don’t have a matching column in the result will not be set.
The query is used for populating the aggregate root, embedded entities and one-to-one relationships including arrays of primitive types which get stored and loaded as SQL-array-types.
Separate queries are generated for maps, lists, sets and arrays of entities.
Spring fully supports Java 8’s parameter name discovery based on the -parameters compiler flag.
By using this flag in your build as an alternative to debug information, you can omit the @Param annotation for named parameters.
|
Spring Data JDBC supports only named parameters. |
7.7.3. Named Queries
If no query is given in an annotation as described in the previous section Spring Data JDBC will try to locate a named query.
There are two ways how the name of the query can be determined.
The default is to take the domain class of the query, i.e. the aggregate root of the repository, take its simple name and append the name of the method separated by a .
.
Alternatively the @Query
annotation has a name
attribute which can be used to specify the name of a query to be looked up.
Named queries are expected to be provided in the property file META-INF/jdbc-named-queries.properties
on the classpath.
The location of that file may be changed by setting a value to @EnableJdbcRepositories.namedQueriesLocation
.
Streaming Results
When you specify Stream as the return type of a query method, Spring Data JDBC returns elements as soon as they become available. When dealing with large amounts of data this is suitable for reducing latency and memory requirements.
The stream contains an open connection to the database.
To avoid memory leaks, that connection needs to be closed eventually, by closing the stream.
The recommended way to do that is a try-with-resource clause
.
It also means that, once the connection to the database is closed, the stream cannot obtain further elements and likely throws an exception.
Custom RowMapper
You can configure which RowMapper
to use, either by using the @Query(rowMapperClass = ….)
or by registering a RowMapperMap
bean and registering a RowMapper
per method return type.
The following example shows how to register DefaultQueryMappingConfiguration
:
@Bean
QueryMappingConfiguration rowMappers() {
return new DefaultQueryMappingConfiguration()
.register(Person.class, new PersonRowMapper())
.register(Address.class, new AddressRowMapper());
}
When determining which RowMapper
to use for a method, the following steps are followed, based on the return type of the method:
-
If the type is a simple type, no
RowMapper
is used.Instead, the query is expected to return a single row with a single column, and a conversion to the return type is applied to that value.
-
The entity classes in the
QueryMappingConfiguration
are iterated until one is found that is a superclass or interface of the return type in question. TheRowMapper
registered for that class is used.Iterating happens in the order of registration, so make sure to register more general types after specific ones.
If applicable, wrapper types such as collections or Optional
are unwrapped.
Thus, a return type of Optional<Person>
uses the Person
type in the preceding process.
Using a custom RowMapper through QueryMappingConfiguration , @Query(rowMapperClass=…) , or a custom ResultSetExtractor disables Entity Callbacks and Lifecycle Events as the result mapping can issue its own events/callbacks if needed.
|
Modifying Query
You can mark a query as being a modifying query by using the @Modifying
on query method, as the following example shows:
@Modifying
@Query("UPDATE DUMMYENTITY SET name = :name WHERE id = :id")
boolean updateName(@Param("id") Long id, @Param("name") String name);
You can specify the following return types:
-
void
-
int
(updated record count) -
boolean
(whether a record was updated)
Unresolved directive in jdbc.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/repository-projections.adoc[leveloffset=+2]
7.8. MyBatis Integration
The CRUD operations and query methods can be delegated to MyBatis. This section describes how to configure Spring Data JDBC to integrate with MyBatis and which conventions to follow to hand over the running of the queries as well as the mapping to the library.
7.8.1. Configuration
The easiest way to properly plug MyBatis into Spring Data JDBC is by importing MyBatisJdbcConfiguration
into you application configuration:
@Configuration
@EnableJdbcRepositories
@Import(MyBatisJdbcConfiguration.class)
class Application {
@Bean
SqlSessionFactoryBean sqlSessionFactoryBean() {
// Configure MyBatis here
}
}
As you can see, all you need to declare is a SqlSessionFactoryBean
as MyBatisJdbcConfiguration
relies on a SqlSession
bean to be available in the ApplicationContext
eventually.
7.8.2. Usage conventions
For each operation in CrudRepository
, Spring Data JDBC runs multiple statements.
If there is a SqlSessionFactory
in the application context, Spring Data checks, for each step, whether the SessionFactory
offers a statement.
If one is found, that statement (including its configured mapping to an entity) is used.
The name of the statement is constructed by concatenating the fully qualified name of the entity type with Mapper.
and a String
determining the kind of statement.
For example, if an instance of org.example.User
is to be inserted, Spring Data JDBC looks for a statement named org.example.UserMapper.insert
.
When the statement is run, an instance of [MyBatisContext
] gets passed as an argument, which makes various arguments available to the statement.
The following table describes the available MyBatis statements:
Name | Purpose | CrudRepository methods that might trigger this statement | Attributes available in the MyBatisContext |
---|---|---|---|
|
Inserts a single entity. This also applies for entities referenced by the aggregate root. |
|
|
|
Updates a single entity. This also applies for entities referenced by the aggregate root. |
|
|
|
Deletes a single entity. |
|
|
|
Deletes all entities referenced by any aggregate root of the type used as prefix with the given property path. Note that the type used for prefixing the statement name is the name of the aggregate root, not the one of the entity to be deleted. |
|
|
|
Deletes all aggregate roots of the type used as the prefix |
|
|
|
Deletes all entities referenced by an aggregate root with the given propertyPath |
|
|
|
Selects an aggregate root by ID |
|
|
|
Select all aggregate roots |
|
|
|
Select a set of aggregate roots by ID values |
|
|
|
Select a set of entities that is referenced by another entity. The type of the referencing entity is used for the prefix. The referenced entities type is used as the suffix. This method is deprecated. Use |
Alle |
|
|
Select a set of entities that is referenced by another entity via a property path. |
Alle |
|
|
Select all aggregate roots, sorted |
|
|
|
Select a page of aggregate roots, optionally sorted |
|
|
|
Count the number of aggregate root of the type used as prefix |
|
|
7.9. Lifecycle Events
Spring Data JDBC triggers events that get published to any matching ApplicationListener
beans in the application context.
For example, the following listener gets invoked before an aggregate gets saved:
@Bean
ApplicationListener<BeforeSaveEvent<Object>> loggingSaves() {
return event -> {
Object entity = event.getEntity();
LOG.info("{} is getting saved.", entity);
};
}
If you want to handle events only for a specific domain type you may derive your listener from AbstractRelationalEventListener
and overwrite one or more of the onXXX
methods, where XXX
stands for an event type.
Callback methods will only get invoked for events related to the domain type and their subtypes so you don’t require further casting.
class PersonLoadListener extends AbstractRelationalEventListener<Person> {
@Override
protected void onAfterLoad(AfterLoadEvent<Person> personLoad) {
LOG.info(personLoad.getEntity());
}
}
The following table describes the available events:
Event | When It Is Published |
---|---|
Before an aggregate root gets deleted. |
|
After an aggregate root gets deleted. |
|
Before an aggregate root gets converted into a plan for executing SQL statements, but after the decision was made if the aggregate is new or not, i.e. if an update or an insert is in order. This is the correct event if you want to set an id programmatically. |
|
Before an aggregate root gets saved (that is, inserted or updated but after the decision about whether if it gets updated or deleted was made). |
|
After an aggregate root gets saved (that is, inserted or updated). |
|
After an aggregate root gets created from a database |
Lifecycle events depend on an ApplicationEventMulticaster , which in case of the SimpleApplicationEventMulticaster can be configured with a TaskExecutor , and therefore gives no guarantees when an Event is processed.
|
7.9.1. Store-specific EntityCallbacks
Spring Data JDBC uses the EntityCallback
API for its auditing support and reacts on the following callbacks:
EntityCallback |
When It Is Published |
---|---|
Before an aggregate root gets deleted. |
|
After an aggregate root gets deleted. |
|
Before an aggregate root gets converted into a plan for executing SQL statements, but after the decision was made if the aggregate is new or not, i.e. if an update or an insert is in order. This is the correct callback if you want to set an id programmatically. |
|
Before an aggregate root gets saved (that is, inserted or updated but after the decision about whether if it gets updated or deleted was made). |
|
After an aggregate root gets saved (that is, inserted or updated). |
|
After an aggregate root gets created from a database |
Unresolved directive in jdbc.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/entity-callbacks.adoc[leveloffset=+1]
7.10. Custom Conversions
Spring Data JDBC allows registration of custom converters to influence how values are mapped in the database. Currently, converters are only applied on property-level.
7.10.1. Writing a Property by Using a Registered Spring Converter
The following example shows an implementation of a Converter
that converts from a Boolean
object to a String
value:
import org.springframework.core.convert.converter.Converter;
@WritingConverter
public class BooleanToStringConverter implements Converter<Boolean, String> {
@Override
public String convert(Boolean source) {
return source != null && source ? "T" : "F";
}
}
There are a couple of things to notice here: Boolean
and String
are both simple types hence Spring Data requires a hint in which direction this converter should apply (reading or writing).
By annotating this converter with @WritingConverter
you instruct Spring Data to write every Boolean
property as String
in the database.
7.10.2. Reading by Using a Spring Converter
The following example shows an implementation of a Converter
that converts from a String
to a Boolean
value:
@ReadingConverter
public class StringToBooleanConverter implements Converter<String, Boolean> {
@Override
public Boolean convert(String source) {
return source != null && source.equalsIgnoreCase("T") ? Boolean.TRUE : Boolean.FALSE;
}
}
There are a couple of things to notice here: String
and Boolean
are both simple types hence Spring Data requires a hint in which direction this converter should apply (reading or writing).
By annotating this converter with @ReadingConverter
you instruct Spring Data to convert every String
value from the database that should be assigned to a Boolean
property.
7.10.3. Registering Spring Converters with the JdbcConverter
class MyJdbcConfiguration extends AbstractJdbcConfiguration {
// …
@Override
protected List<?> userConverters() {
return Arrays.asList(new BooleanToStringConverter(), new StringToBooleanConverter());
}
}
In previous versions of Spring Data JDBC it was recommended to directly overwrite AbstractJdbcConfiguration.jdbcCustomConversions() .
This is no longer necessary or even recommended, since that method assembles conversions intended for all databases, conversions registered by the Dialect used and conversions registered by the user.
If you are migrating from an older version of Spring Data JDBC and have AbstractJdbcConfiguration.jdbcCustomConversions() overwritten conversions from your Dialect will not get registered.
|
7.10.4. JdbcValue
Value conversion uses JdbcValue
to enrich values propagated to JDBC operations with a java.sql.Types
type.
Register a custom write converter if you need to specify a JDBC-specific type instead of using type derivation.
This converter should convert the value to JdbcValue
which has a field for the value and for the actual JDBCType
.
Unresolved directive in jdbc-custom-conversions.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/custom-conversions.adoc[leveloffset=+3]
7.11. Logging
Spring Data JDBC does little to no logging on its own.
Instead, the mechanics of JdbcTemplate
to issue SQL statements provide logging.
Thus, if you want to inspect what SQL statements are run, activate logging for Spring’s NamedParameterJdbcTemplate
oder MyBatis.
7.12. Transactionality
The methods of CrudRepository
instances are transactional by default.
For reading operations, the transaction configuration readOnly
flag is set to true
.
All others are configured with a plain @Transactional
annotation so that default transaction configuration applies.
For details, see the Javadoc of SimpleJdbcRepository
.
If you need to tweak transaction configuration for one of the methods declared in a repository, redeclare the method in your repository interface, as follows:
interface UserRepository extends CrudRepository<User, Long> {
@Override
@Transactional(timeout = 10)
List<User> findAll();
// Further query method declarations
}
The preceding causes the findAll()
method to be run with a timeout of 10 seconds and without the readOnly
flag.
Another way to alter transactional behavior is by using a facade or service implementation that typically covers more than one repository. Its purpose is to define transactional boundaries for non-CRUD operations. The following example shows how to create such a facade:
@Service
public class UserManagementImpl implements UserManagement {
private final UserRepository userRepository;
private final RoleRepository roleRepository;
@Autowired
public UserManagementImpl(UserRepository userRepository,
RoleRepository roleRepository) {
this.userRepository = userRepository;
this.roleRepository = roleRepository;
}
@Transactional
public void addRoleToAllUsers(String roleName) {
Role role = roleRepository.findByName(roleName);
for (User user : userRepository.findAll()) {
user.addRole(role);
userRepository.save(user);
}
}
The preceding example causes calls to addRoleToAllUsers(…)
to run inside a transaction (participating in an existing one or creating a new one if none are already running).
The transaction configuration for the repositories is neglected, as the outer transaction configuration determines the actual repository to be used.
Note that you have to explicitly activate <tx:annotation-driven />
or use @EnableTransactionManagement
to get annotation-based configuration for facades working.
Note that the preceding example assumes you use component scanning.
7.12.1. Transactional Query Methods
To let your query methods be transactional, use @Transactional
at the repository interface you define, as the following example shows:
@Transactional(readOnly = true)
interface UserRepository extends CrudRepository<User, Long> {
List<User> findByLastname(String lastname);
@Modifying
@Transactional
@Query("delete from User u where u.active = false")
void deleteInactiveUsers();
}
Typically, you want the readOnly
flag to be set to true, because most of the query methods only read data.
In contrast to that, deleteInactiveUsers()
uses the @Modifying
annotation and overrides the transaction configuration.
Thus, the method is with the readOnly
flag set to false
.
It is highly recommended to make query methods transactional. These methods might execute more then one query in order to populate an entity. Without a common transaction Spring Data JDBC executes the queries in different connections. This may put excessive strain on the connection pool and might even lead to dead locks when multiple methods request a fresh connection while holding on to one. |
It is definitely reasonable to mark read-only queries as such by setting the readOnly flag.
This does not, however, act as a check that you do not trigger a manipulating query (although some databases reject INSERT and UPDATE statements inside a read-only transaction).
Instead, the readOnly flag is propagated as a hint to the underlying JDBC driver for performance optimizations.
|
Unresolved directive in jdbc.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/auditing.adoc[leveloffset=+1]
7.13. JDBC Auditing
In order to activate auditing, add @EnableJdbcAuditing
to your configuration, as the following example shows:
@Configuration
@EnableJdbcAuditing
class Config {
@Bean
AuditorAware<AuditableUser> auditorProvider() {
return new AuditorAwareImpl();
}
}
If you expose a bean of type AuditorAware
to the ApplicationContext
, the auditing infrastructure automatically picks it up and uses it to determine the current user to be set on domain types.
If you have multiple implementations registered in the ApplicationContext
, you can select the one to be used by explicitly setting the auditorAwareRef
attribute of @EnableJdbcAuditing
.
Appendix
Appendix A: Glossary
- AOP
-
Aspect-Oriented Programming
- CRUD
-
Create, Read, Update, Delete - Basic persistence operations
- Dependency Injection
-
Pattern to hand a component’s dependency to the component from outside, freeing the component to lookup the dependent itself. For more information, see https://en.wikipedia.org/wiki/Dependency_Injection.
- JPA
-
Java Persistence API
- Spring
-
Java application framework — https://projects.spring.io/spring-framework
Unresolved directive in index.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/repository-namespace-reference.adoc[leveloffset=+1] Unresolved directive in index.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/repository-populator-namespace-reference.adoc[leveloffset=+1] Unresolved directive in index.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/repository-query-keywords-reference.adoc[leveloffset=+1] Unresolved directive in index.adoc - include::../../../../../spring-data-commons/src/main/asciidoc/repository-query-return-types-reference.adoc[leveloffset=+1]