Perchloromethyl mercaptan

(Redirected from Perchloromethylmercaptan)

Perchloromethyl mercaptan is the organosulfur compound with the formula CCl3SCl. It is mainly used as an intermediate for the synthesis of dyes and fungicides (captan, folpet). It is a colorless oil, although commercial samples are yellowish. It is insoluble in water but soluble in organic solvents. It has a foul, unbearable, acrid odor. Perchloromethyl mercaptan is the original name. The systematic name is trichloromethanesulfenyl chloride, because the compound is a sulfenyl chloride, not a mercaptan.[3]

Perchloromethyl mercaptan
Skeletal formula of perchloromethyl mercaptan
Space-filling model of the perchloromethyl mercaptan molecule
Names
Preferred IUPAC name
Trichloromethyl thiohypochlorite
Other names
Trichloromethane sulfenyl chloride

Trichloromethyl sulfur chloride

Clairsit
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.008.948 Edit this at Wikidata
EC Number
  • 209-840-4
RTECS number
  • PB0370000
UNII
UN number 1670
  • InChI=1S/CCl4S/c2-1(3,4)6-5 checkY
    Key: RYFZYYUIAZYQLC-UHFFFAOYSA-N checkY
  • InChI=1S/CCl4S/c2-1(3,4)6-5
  • ClC(Cl)(Cl)SCl
Properties
CCl4S
Molar mass 185.87 g·mol−1
Appearance Oily, yellow liquid
Odor disagreeable, acrid odor
Density 1.72 g/cm3
Melting point −44 °C (−47 °F; 229 K)
Boiling point 147 to 148 °C (297 to 298 °F; 420 to 421 K)
Insoluble, reacts
log P 3.47 (estimated)
Vapor pressure 0.4 kPa (at 20 °C)
Hazards
GHS labelling:
GHS05: CorrosiveGHS06: ToxicGHS07: Exclamation mark
Danger
H301, H311, H312, H314, H330, H335
P260, P261, P264, P270, P271, P280, P284, P301+P310, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P320, P321, P322, P330, P361, P363, P403+P233, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
0
2
Lethal dose or concentration (LD, LC):
82.6 mg/kg (rat, oral)[2]
11 ppm (rat, 1 hr)
16 ppm (rat, 1 hr)
9 ppm (mouse, 3 hr)
38 ppm (mouse, 2 hr)
11 ppm (rat, 1 hr)[2]
388 ppm (human, 10 min)
46 ppm (mouse, 10 min)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 0.1 ppm (0.8 mg/m3)[1]
REL (Recommended)
TWA 0.1 ppm (0.8 mg/m3)[1]
IDLH (Immediate danger)
10 ppm[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

History

edit

It was used as a chemical warfare agent by the French in the 1915 battle of Champagne. Shortly thereafter, wartime use was abandoned due to the clear warning properties, the decomposition in the presence of iron and steel, and the easy removal of the vapor by charcoal.[4]

Preparation

edit

The method to prepare perchloromethyl mercaptan was first described by Rathke in 1873[3] and is still used. Carbon disulfide is chlorinated using an iodine catalyst. The following equations operate most efficiently at temperatures below about 30 °C

CS2 + 3 Cl2 → CCl3SCl + SCl2
2 CS2 + 5 Cl2 → 2 CCl3SCl + S2Cl2

At higher temperatures, the chlorination gives carbon tetrachloride and additional sulfur chlorides.[5] The formation of byproducts can be suppressed by performing the reaction in the presence of diketones.[6] Another byproduct is thiophosgene. The more volatile byproducts such as carbon tetrachloride and sulfur dichloride can be removed by distillation. The separation of perchloromethyl mercaptan from S2Cl2 by distillation is challenging since their boiling points are very close. Another byproduct that forms is hexachloroethane. Innovations in the basic Rathke method have been reported.[6]

Reactivity

edit

The compound slowly hydrolyzes:[6]

CSCl4 + 2 H2O → CO2 + 4 HCl + 18 S8

The compound is corrosive to most metals. It reacts with iron, evolving carbon tetrachloride. Perchloromethyl mercaptan is oxidized by nitric acid to trichloromethanesulfonyl chloride (Cl3CSO2Cl), a white solid.[4]

Toxicity

edit
Animal Oral Inhalation Intraperitoneal Intravenous Skin Eyes
Rat 82,6 mg/kg 11 ppm/1h 25 mg/kg
Mouse 40 mg/kg 296 g/m3/2h 10 mg/kg 56 mg/kg
Rabbit 1410 mg/kg
Guinea Pig 500 μL/kg 50 μg/24h[7]

When it is heated or in a fire, it will emit toxic and corrosive gases. It is also very toxic by inhalation or skin absorption.[3]

At least two mechanisms could account for the toxicity of perchloromethyl mercaptan, as hypothesized by Althoff (1973). The first mechanism is a reaction between perchloromethyl mercaptan and biological functional groups such as hydroxyl, sulfhydryl, amino and carboxyl groups. This results in an inactivation of key enzymes. A second general pathway reaction is the hydrolysis to give hydrochloric acid.[3]

References

edit
  1. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0489". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ a b c "Perchloromethyl mercaptan". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ a b c d Committee on Acute Exposure Guideline Levels, Committee on Toxicology, National Research Council, (2011), Acute Exposure Guideline Levels for Selected Airborne Chemicals.
  4. ^ a b Sosnovsky, George "The chemistry of trichloromethanesulfenyl chloride" Chemical Reviews 1958, volume 58, 509-40. doi:10.1021/cr50021a003
  5. ^ Manchiu D. S. Lay, Mitchell W. Sauerhoff And Donald R. Saunders "Carbon Disulfide" in Ullmann's Encyclopedia Of Industrial Chemistry, 2000, Wiley-VCH, Weinheim. doi:10.1002/14356007.a05_185
  6. ^ a b c Greco, C., (1978), Production of perchloromethyl mercaptan, Stauffer ChemicalCompany, Westport, Conn.
  7. ^ Catalog of Chemical Suppliers, Custom Synthesis Companies and Equipment Manufactures.
edit