Jump to content

Carriage control tape: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
usage conventions
→‎Conventions: Added picture of new tapes before punching and looping.
 
(13 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{short description|Loop of punched tape used to synchronize fast vertical page motion in line printers}}
[[File:IBM 1403 carriage control tape.agr.jpg|thumb|Carriage control tape on an [[IBM 1403]] printer. One channel punch is visible in this photo.]]
[[File:IBM 1403 carriage control tape.jpg|thumb|Carriage control tape on an [[IBM 1403]] printer. One channel punch is visible in this photo.]]
A '''carriage control tape''' was a loop of [[punched tape]] that was used to synchronize rapid vertical page movement in most [[IBM]] and many other [[line printer]]s from [[unit record equipment|unit record]] days through the 1970s. The tape loop was as long as the length of a single page. A pin wheel moved the tape accurately using holes in the center of the tape. A hole punched in one of the other channels represented a particular position on the page. Channel one was typically used to indicate the top of the page and might be the only channel used. Another channel might indicate the summary line on an invoice, enabling rapid skipping to that line. IBM provides a special manual punch that allowed accurate placement of the channel punches. Skipping occurred under computer control, but a form feed switch on the printer control panel allowed a manual skip to the top of the page. The tapes could be easily changed when new, continuously fed forms were loaded into the printer.
A '''carriage control tape''' was a loop of [[punched tape]] that was used to synchronize rapid vertical page movement in most [[IBM]] and many other [[line printer]]s from [[unit record equipment|unit record]] days through the 1960s. The tape loop was as long as the length of a single page. A pin wheel moved the tape accurately using holes in the center of the tape. A hole punched in one of the other channels represented a particular position on the page. Channel one was typically used to indicate the top of the page and might be the only channel used. Another channel might indicate the summary line on an invoice, enabling rapid skipping to that line. IBM provides a special manual punch that allowed accurate placement of the channel punches. Skipping occurred under computer control, but a form feed switch on the printer control panel allowed a manual skip to the top of the page. The tapes could be easily changed when new, continuously fed forms were loaded into the printer.


==Forms control buffer==
==Forms control buffer==
Newer printers starting with the 3211<ref>{{cite book
Newer printers use a "forms control buffer" (FCB), which is an electronic image of the physical carriage control tape. A job can request a specific FCB for a printout, and it will be loaded before printing is started, eliminating operator intervention.
| title = IBM 3211 Printer and 3811 Control Unit - Component Description
| id = GA24-3543-0
| date = June 1980
| edition = First
| section = Program-Controlled Carriage
| page = 5
| url = http://bitsavers.org/pdf/ibm/3811/GA24-3543-0_3211_Printer_and_3811_Control_Unit_Component_Description_Jun70.pdf
| access-date = September 19, 2023
}}
</ref> use a "forms control buffer" (FCB), which is an electronic image of the physical carriage control tape. A job can request a specific FCB for a printout, and it will be loaded before printing is started, eliminating operator intervention.


==Conventions==
==Conventions==
Conventionally, channel 1 indicates the top of the page, and a new page is started with a "skip to channel 1" command. Channel 9 is positioned a few lines above the end of the page, so a system that could sense the printer status while printing would, for example, have room to print a page footer or totals. Channel 12 indicates the last printable line of the form.<ref>{{cite web|title=IBM 1403 Printer|url=http://www.ibm1130.net/functional/Printers.html|website=ibm1130.net|accessdate=Feb 3, 2018}}</ref> These are only conventions, however, and applications are free to establish their own standards.
Conventionally, channel 1 indicates the top of the form (the first printable line on a page, often but not necessarily the first line of the page), and a new form is started with a "skip to channel 1" command (skipping is much faster than line spacing). Channel 9 is positioned a few lines above the end of the page, so a system that could sense the printer status while printing would, for example, have room to print a page footer or totals. Channel 12 indicates the last printable line of the form.<ref>{{cite web|title=IBM 1403 Printer|url=http://www.ibm1130.net/functional/Printers.html|website=ibm1130.net|accessdate=Feb 3, 2018}}</ref> These are only conventions, however, and applications are free to establish their own standards.


<gallery>
<gallery>
Line 13: Line 24:


File:IBM1403controltape.jpg|Close up of carriage control tape.
File:IBM1403controltape.jpg|Close up of carriage control tape.

File:IBM printer carriage control tapes.jpg|New tapes before punching and 'looping'. Usually supplied in boxes of 25 as shown.

</gallery>
</gallery>


Line 20: Line 34:
* [https://web.archive.org/web/20100809095516/http://www.bitsavers.org/pdf/ibm/cardProc/22-5765-7_407oper_1953.pdf IBM 407 manual p.129 ff]
* [https://web.archive.org/web/20100809095516/http://www.bitsavers.org/pdf/ibm/cardProc/22-5765-7_407oper_1953.pdf IBM 407 manual p.129 ff]
* [http://www.ibm1130.net/functional/Printers.html Excerpt on printing from IBM 1130 manual]
* [http://www.ibm1130.net/functional/Printers.html Excerpt on printing from IBM 1130 manual]
* [http://www.computerhistory.org/collections/accession/X608.85 Rack for holding carriage tapes at [[Computer History Museum]]]
* [http://www.computerhistory.org/collections/accession/X608.85 Rack for holding carriage tapes] at [[Computer History Museum]]
* {{US patent|3094261}}
* {{US patent|3094261}}


==External links==
==External links==
* Two IBM carriage control tape punches in the Computer History Museum collection: [http://www.computerhistory.org/collections/catalog/102674771], [http://www.computerhistory.org/collections/catalog/102668343]
* Two IBM carriage control tape punches in the Computer History Museum collection: [http://www.computerhistory.org/collections/catalog/102674771], [http://www.computerhistory.org/collections/catalog/102668343]
* Another image of a carriage control tape punch at ibmcolletables.com: [http://ibmcollectable.com/albums/album127/tape_punch_tape.jpg]
* Several images of a carriage control tape punch at reddit: [https://www.reddit.com/r/IBM/comments/ewqj2f/ibm_192726_printer_carriage_control_tape_key/]


[[Category:IBM printers]]
[[Category:IBM printers]]
[[Category:Computer storage tape media]]

Latest revision as of 17:15, 4 December 2023

Carriage control tape on an IBM 1403 printer. One channel punch is visible in this photo.

A carriage control tape was a loop of punched tape that was used to synchronize rapid vertical page movement in most IBM and many other line printers from unit record days through the 1960s. The tape loop was as long as the length of a single page. A pin wheel moved the tape accurately using holes in the center of the tape. A hole punched in one of the other channels represented a particular position on the page. Channel one was typically used to indicate the top of the page and might be the only channel used. Another channel might indicate the summary line on an invoice, enabling rapid skipping to that line. IBM provides a special manual punch that allowed accurate placement of the channel punches. Skipping occurred under computer control, but a form feed switch on the printer control panel allowed a manual skip to the top of the page. The tapes could be easily changed when new, continuously fed forms were loaded into the printer.

Forms control buffer

[edit]

Newer printers starting with the 3211[1] use a "forms control buffer" (FCB), which is an electronic image of the physical carriage control tape. A job can request a specific FCB for a printout, and it will be loaded before printing is started, eliminating operator intervention.

Conventions

[edit]

Conventionally, channel 1 indicates the top of the form (the first printable line on a page, often but not necessarily the first line of the page), and a new form is started with a "skip to channel 1" command (skipping is much faster than line spacing). Channel 9 is positioned a few lines above the end of the page, so a system that could sense the printer status while printing would, for example, have room to print a page footer or totals. Channel 12 indicates the last printable line of the form.[2] These are only conventions, however, and applications are free to establish their own standards.

Sources

[edit]
  1. ^ "Program-Controlled Carriage". IBM 3211 Printer and 3811 Control Unit - Component Description (PDF) (First ed.). June 1980. p. 5. GA24-3543-0. Retrieved September 19, 2023.
  2. ^ "IBM 1403 Printer". ibm1130.net. Retrieved Feb 3, 2018.
[edit]
  • Two IBM carriage control tape punches in the Computer History Museum collection: [1], [2]
  • Several images of a carriage control tape punch at reddit: [3]