Wind profiler: Difference between revisions
m robot Adding: uk:Профайлер вітру |
m Disambiguated: RASS → Radio acoustic sounding system using Dab solver |
||
Line 1: | Line 1: | ||
[[Image:Wind_Profiler.jpg||thumb|250px|right|A radar wind profiler.]][[Image:Sodar_triton.jpg|right|250px|thumb|The TRITON transportable [[SODAR]] system used to measure wind profiles from [[Second Wind (company)| Second Wind]].]]A '''wind profiler''' is a type of weather observing equipment that uses [[radar]] or sound waves ([[SODAR]]) to detect the [[wind]] [[wind speed|speed]] and [[wind direction|direction]] at various elevations above the ground. Readings are made at each kilometer above sea level, up to the extent of the troposphere (i.e., between 8 and 17 km above mean sea level). Above this level there is inadequate water vapor present to produce a radar "bounce." The data synthesized from wind direction and speed is very useful to meteorological forecasting and timely reporting for flight planning. A twelve hour history of data is available through [[NOAA]] websites. |
[[Image:Wind_Profiler.jpg||thumb|250px|right|A radar wind profiler.]][[Image:Sodar_triton.jpg|right|250px|thumb|The TRITON transportable [[SODAR]] system used to measure wind profiles from [[Second Wind (company)| Second Wind]].]]A '''wind profiler''' is a type of weather observing equipment that uses [[radar]] or sound waves ([[SODAR]]) to detect the [[wind]] [[wind speed|speed]] and [[wind direction|direction]] at various elevations above the ground. Readings are made at each kilometer above sea level, up to the extent of the troposphere (i.e., between 8 and 17 km above mean sea level). Above this level there is inadequate water vapor present to produce a radar "bounce." The data synthesized from wind direction and speed is very useful to meteorological forecasting and timely reporting for flight planning. A twelve hour history of data is available through [[NOAA]] websites. |
||
==Radar |
==Radar wind profiler== |
||
[[Pulse-Doppler radar]] wind profilers operate using principles similar to those used by Doppler |
[[Pulse-Doppler radar]] wind profilers operate using principles similar to those used by Doppler |
||
Line 9: | Line 9: | ||
vertical and oriented orthogonal to one another to measure the horizontal components of the air's |
vertical and oriented orthogonal to one another to measure the horizontal components of the air's |
||
motion. A UHF profiler includes subsystems to control the radar's transmitter, receiver, signal |
motion. A UHF profiler includes subsystems to control the radar's transmitter, receiver, signal |
||
processing, and [[ |
processing, and [[Radio Acoustic Sounding System]] (RASS), if provided, as well as data telemetry and remote control. |
||
The radar transmits an |
The radar transmits an |
||
Line 72: | Line 72: | ||
==References== |
==References== |
||
* Official NOAA wind profiler search page |
* Official NOAA wind profiler search page <ref>http://www.profiler.noaa.gov/npn/profiler.jsp</ref> See real time (and 12 hour history) graphic displays of wind direction and speed from ground level up to 17 KM above sea level (at 1 KM intervals). Click on any star or dot, then click on "get plot" at left. |
||
{{USGovernment|sourceURL=[http://www.epa.gov/scram001/guidance/met/mmgrma.pdf Meteorological Monitoring Guidance for Regulatory Modeling Applications]}} |
{{USGovernment|sourceURL=[http://www.epa.gov/scram001/guidance/met/mmgrma.pdf Meteorological Monitoring Guidance for Regulatory Modeling Applications]}} |
||
Revision as of 20:32, 30 November 2010
![](http://upload.wikimedia.org/wikipedia/commons/thumb/1/1b/Wind_Profiler.jpg/250px-Wind_Profiler.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/dd/Sodar_triton.jpg/250px-Sodar_triton.jpg)
A wind profiler is a type of weather observing equipment that uses radar or sound waves (SODAR) to detect the wind speed and direction at various elevations above the ground. Readings are made at each kilometer above sea level, up to the extent of the troposphere (i.e., between 8 and 17 km above mean sea level). Above this level there is inadequate water vapor present to produce a radar "bounce." The data synthesized from wind direction and speed is very useful to meteorological forecasting and timely reporting for flight planning. A twelve hour history of data is available through NOAA websites.
Radar wind profiler
Pulse-Doppler radar wind profilers operate using principles similar to those used by Doppler sodars, except that electromagnetic (EM) signals are used rather than acoustic signals to remotely sense winds aloft. In a typical implementation, the radar can sample along each of five beams: one is aimed vertically to measure vertical velocity, and four are tilted off vertical and oriented orthogonal to one another to measure the horizontal components of the air's motion. A UHF profiler includes subsystems to control the radar's transmitter, receiver, signal processing, and Radio Acoustic Sounding System (RASS), if provided, as well as data telemetry and remote control.
The radar transmits an electromagnetic pulse along each of the antenna's pointing directions. The duration of the transmission determines the length of the pulse emitted by the antenna, which in turn corresponds to the volume of air illuminated (in electrical terms) by the radar beam. Small amounts of the transmitted energy are scattered back (referred to as backscattering) toward and received by the radar. Delays of fixed intervals are built into the data processing system so that the radar receives scattered energy from discrete altitudes, referred to as range gates. The Doppler frequency shift of the backscattered energy is determined, and then used to calculate the velocity of the air toward or away from the radar along each beam as a function of altitude. The source of the backscattered energy (radar “targets”) is small-scale turbulent fluctuations that induce irregularities in the radio refractive index of the atmosphere. The radar is most sensitive to scattering by turbulent eddies whose spatial scale is ½ the wavelength of the radar, or approximately 16 centimeters (cm) for a UHF profiler.
A profiler's (and sodar's) ability to measure winds is based on the assumption that the turbulent eddies that induce scattering are carried along by the mean wind. The energy scattered by these eddies and received by the profiler is orders of magnitude smaller than the energy transmitted. However, if sufficient samples can be obtained, then the amplitude of the energy scattered by these eddies can be clearly identified above the background noise level, then the mean wind speed and direction within the volume being sampled can be determined. The radial components measured by the tilted beams are the vector sum of the horizontal motion of the air toward or away from the radar and any vertical motion present in the beam. Using appropriate trigonometry, the three-dimensional meteorological velocity components (u,v,w) and wind speed and wind direction are calculated from the radial velocities with corrections for vertical motions.
A boundary-layer radar wind profiler can be configured to compute averaged wind profiles for periods ranging from a few minutes to an hour. Boundary-layer radar wind profilers are often configured to sample in more than one mode. For example, in a “low mode,” the pulse of energy transmitted by the profiler may be 60 m in length. The pulse length determines the depth of the column of air being sampled and thus the vertical resolution of the data. In a “high mode,” the pulse length is increased, usually to 100 m or greater. The longer pulse length means that more energy is being transmitted for each sample, which improves the signal-to-noise ratio (SNR) of the data. Using a longer pulse length increases the depth of the sample volume and thus decreases the vertical resolution in the data. The greater energy output of the high mode increases the maximum altitude to which the radar wind profiler can sample, but at the expense of coarser vertical resolution and an increase in the altitude at which the first winds are measured. When radar wind profilers are operated in multiple modes, the data are often combined into a single overlapping data set to simplify postprocessing and data validation procedures.[1]
Notes
- ^ Bailey, Desmond T. (2000) [1987]. "Upper-air Monitoring". Meteorological Monitoring Guidance for Regulatory Modeling Applications (PDF). John Irwin. Research Triangle Park, NC: United States Environmental Protection Agency. pp. 9–9 to 9–11. EPA-454/R-99-005.
{{cite book}}
: Unknown parameter|month=
ignored (help); Unknown parameter|origmonth=
ignored (help)
References
- Official NOAA wind profiler search page [1] See real time (and 12 hour history) graphic displays of wind direction and speed from ground level up to 17 KM above sea level (at 1 KM intervals). Click on any star or dot, then click on "get plot" at left.
This article incorporates text from this source, which is in the public domain: Meteorological Monitoring Guidance for Regulatory Modeling Applications