Dye laser: Difference between revisions
No edit summary |
rv please place comments of this nature on the appropriate talk page |
||
Line 1: | Line 1: | ||
[[Image:Starfield Optical Range - sodium laser.jpg|thumb|left|300px|A [[dye laser]] used at the [[Starfire Optical Range]] for [[LIDAR]] and [[laser guide star]] experiments is tuned to the [[Fraunhofer lines|sodium D line]] and used to excite sodium atoms [[sodium layer|in the upper atmosphere]].]] |
[[Image:Starfield Optical Range - sodium laser.jpg|thumb|left|300px|A [[dye laser]] used at the [[Starfire Optical Range]] for [[LIDAR]] and [[laser guide star]] experiments is tuned to the [[Fraunhofer lines|sodium D line]] and used to excite sodium atoms [[sodium layer|in the upper atmosphere]].]] |
||
A '''dye laser''' is a [[laser]] that uses an [[organic compound|organic]] [[dye]] as a lasing medium, usually as a [[liquid]] [[solution]]. Compared to [[gas]]es and most [[solid-state]] lasing media, a dye can usually be used for a much wider range of [[wavelength]]s. The wide bandwidth make them particularly suitable for [[tunable laser]]s and pulsed lasers. Moreover, the dye can be replaced by another type in order to generate different wavelengths with the same laser, although this usually requires replacing other optical components in the laser as well. |
|||
==Construction== |
==Construction== |
Revision as of 07:01, 21 May 2006
A dye laser is a laser that uses an organic dye as a lasing medium, usually as a liquid solution. Compared to gases and most solid-state lasing media, a dye can usually be used for a much wider range of wavelengths. The wide bandwidth make them particularly suitable for tunable lasers and pulsed lasers. Moreover, the dye can be replaced by another type in order to generate different wavelengths with the same laser, although this usually requires replacing other optical components in the laser as well.
Bauwesen
Since organic dyes tend to degrade under the influence of light, the dye solution is normally circulated from a large reservoir. The dye solution can be flowing through a cuvette, i.e., a glass container, or be as a dye jet, i.e., as a sheet-like stream in open air from a specially-shaped nozzle. With a dye jet, one avoids reflection losses from the glass surfaces and contamination of the walls of the cuvette. These advantages come at the cost of a more-complicated alignment.
Chemicals used
Some of the dyes are Rhodamine 6G, fluorescein, coumarin, stilbene, umbelliferone, tetracene, malachite green, and others.
Adamantane is added to some dyes to prolong their life.
Cycloheptatriene and cyclooctatetraene (COT) can be added as triplet quenchers for rhodamine G, increasing the laser output power. Output power of 1.4 kilowatt at 585 nm was achieved using Rhodamine 6G with COT in methanol-water solution.