MAG-7

Techno Arms MAG-7
MAG-7M1 (US civilian-legal version)
Typ	Pump-action shotgun
Place of origin	Südafrika
Production history
Designed	1995
Variants	MAG-7 MAG-7M1
Specifications
Mass	4 kg (8.2 lb)
Length	550 mm (21.6 in)
Barrel length	320 mm (12.6 in)
Cartridge	12 gauge x 60 mm cartridges
Action	Pump-action
Effective firing range	40 m (45 yd)
Feed system	5 cartridge removable box magazine

The MAG-7 is a pump-action shotgun manufactured by Techno Arms PTY of South Africa since 1995.

History and design

MAG-7M1 modified as a short-barreled shotgun, to original design specifications.

The MAG-7 was developed as a close quarters combat (CQB) weapon, which would combine the aspects of a compact submachine gun and a pump shotgun.

For ease of reloading, a magazine system is ideal. With the traditional pump-action mechanism located under the barrel, there is no convenient forward location for a magazine. This leaves the bullpup layout or a pistol-like arrangement of placing the magazine within the pistol grip as possible locations. It was found that the standard 12-gauge shotgun shell at 70 mm was too long to comfortably hold in the desired pistol grip mounting.

However, it was also found that at the ranges being considered for this weapon, the standard shotgun shells had too much power. This led to the development of a shorter round, 60 mm long (2.36 inch as opposed to 2.75) with both the desired power and size. The use of the MAG-7 with these cartridges yields an effective range of 45 yards (41.1 m), although they have a proven lethality to 90 yards (82 m). The MAG-7 also has a detachable, top-folding sheet metal stock.

There were two models initially manufactured—the original MAG-7, and civilian-legal model, called the MAG-7 M1. The M1 features a longer barrel and fixed wooden stock to extend the barrel to 18 inches (46 cm) and the overall length to 26 inches (66 cm) to meet the requirements of the National Firearms Act, and of the gun laws of many other countries. In this non-NFA configuration, however, the original concept of the weapon as an extremely compact hard-hitting tool for CQB and backup is defeated.

Service

Although the design concept was geared towards law enforcement and military close quarters combat scenarios, there was inadequate demand for the weapon due to some problematic design issues in its conception. One such design feature was safety lever on the left side of the stamped steel receiver, above the pistol grip. The actuation of this lever is not possible without removing the left arm from the pump, and is difficult if the operator is wearing gloves. The same problem exists for the slide lock button. These problems were mainly found in the early models exported to the United States of America. The company then focused its attention on these issues and were solved by reducing the resistance of the safety lever and over-ride slide lock button. The user can now operate both levers effectively and easily without taking the left hand off the pump. Another issue that plagued the MAG-7 was the 7.7 Kgf trigger pull. It was also addressed by the manufacturer and reduced to an industry standard 3.5Kgf

Proprietary ammunition

The original 12 gauge × 60 mm cartridges are difficult to obtain, however Aguila Ammunition Company of Mexico's "Mini-Shells" can be substituted but will not function 100% with the MAG-7 magazine. 3 rounds can be usually be loaded and fired with some reliability. Standard 12 gauge cartridges can also be modified to comply with the 60 mm chamber requirement. Techno Arms also stocks these cartridges from No 5, AAA, SSG and the riot rubber bullet.

Current status

The manufacturer, Techno Arms (PTY) Ltd., located in Modderfontein, Gauteng, South Africa, as of March 2012 is active and is marketing the MAG-7 in three versions: the standard MAG-7, the civilian-legal MAG-7 M1, and the M7 Dual Riot, a combination weapon based upon the standard MAG-7, with a fixed metal stock and an up-mounted 37mm single-shot less-lethal launcher with tilting barrel, extremely reminiscent of the widely popular South-African Milkor Stopper 37/38 mm riot gun, which Techno Arms now also manufactures.

See also

• List of shotguns

External links

• Official site