Mercedes-Benz M102 engine
This article needs additional citations for verification. (December 2009) |
Mercedes-Benz M102 engine | |
---|---|
Übersicht | |
Manufacturer | Mercedes-Benz |
Production | 1980–1993 |
Layout | |
Configuration | Straight-4 |
Displacement |
|
Cylinder bore |
|
Piston stroke |
|
Valvetrain | |
Compression ratio | 10.5:1 |
Combustion | |
Fuel system | 175 CDT Carburetor Multi-point fuel injection |
Management | Bosch KE-Jetronic |
Fuel type | Gasoline |
Cooling system | Water-cooled |
Output | |
Power output | 63–173 kW (86–235 PS; 84–232 bhp) |
Torque output | 154–245 N⋅m (114–181 lb⋅ft) |
Dimensions | |
Dry weight | 118 kg (260 lb) |
Chronology | |
Predecessor | Mercedes-Benz M115 engine |
Successor | Mercedes-Benz M111 engine |
The M102 engine family is a inline-four gasoline automobile engine family built by Mercedes-Benz in the 1980s and early 1990s. It is a relatively oversquare engine with a large bore and short stroke compared to the M115 engine which was used during the same timeframe.
M102.910
[edit]Used in the W201 190E 1.8 from 1990 onwards (badged as 180E in Australia from 1991 to 1993). Cubic capacity: 1,797 cc (1.8 L). Power output: 80 kW (109 PS; 107 bhp). Torque: 154 N⋅m (114 lb⋅ft)
Applications:
- 1990–1993 W201 180E and 190E 1.8
M102.920
[edit]The M102.920 was a 2.0 L engine with an bore and stroke 89 mm × 80.25 mm (3.50 in × 3.16 in). Equipped with carburetor 175 CDT. Cubic capacity: 1,997 cc (2.0 L). Power output: 80 kW (109 PS; 107 bhp). Swedish and Swiss market models developed 98 PS (72 kW) at 5000 rpm thanks to their stricter emissions regulations.[1]
Applications:
M102.921
[edit]Similar to M102.920, but less power due to a different camshaft and different carburetor. Power Output: 66 kW (90 PS; 89 bhp)
Applications:
- 1983–1985 W201 190 (201.022)
M102.922
[edit]An update of the M102.920 engine for use in the W124 chassis, Cubic capacity: 1,997 cc (2.0 L). Power output: 80 kW (109 PS; 107 bhp). During 1989 the bore was shrunk by 0.05 mm (0.0020 in), bringing the displacement down to 1996 cc. This change was applied across the board of all 2.0 and 2.3-litre M102 engines as part of running updates carried out between 1988 and 1990.
Applications:
- 1985–1992 W124 200
M102.924
[edit]Similar to M102.921, different carburetor, single-belt drive for alternator, power steering pump and air-conditioning compressor (where fitted). Hydraulic aided valvetrain. Power output: 77 kW (105 PS; 103 bhp).
Application
- 1986–1990 W201 190 (201.023)
M102.938
[edit]Low compression version of M102.921. Power output: 63 kW (86 PS; 84 bhp).
Application
M102.939
[edit]Low compression version of M102.920. Power output: 74 kW (101 PS; 99 bhp).
Application
M102.961
[edit]A 2.0 L multi-point fuel-injected (KE-Jetronic) variation of the M102.921. An "E" was added to the model of the vehicle (standing for "einspritzung", the German word for fuel injection). This engine is identified by TSZ ignition and multiple belts for the alternator, power steering and air conditioning compressor (where fitted). Cubic capacity: 1,997 cc (2.0 L). Power output: 90 kW (122 PS; 121 bhp)
Application
- 1983–1985 W201 190E
- 1984 Apal Francochamps
M102.962
[edit]An update to the M102.961 introduced in 1985. This is identified by the EZL ignition system and a single accessory drive belt. Cubic capacity: 1,997 cc (2.0 L). Power output: 87–90 kW (118-122 PS; 117-120 bhp)
Applications:
- 1985–1993 W201 190E
M102.963
[edit]2.0–litre version with KE-Jetronic fuel injection. Cubic capacity: 1,996 cc (2.0 L). Power output: 90 kW (122 PS; 121 bhp)
Applications:
- 1985–1992 W124 200E.
M102.964
[edit]2.0–litre version with KE-Jetronic fuel injection for the italian W460. Cubic capacity: 1,997 cc (2.0 L). Power output: 90 kW (122 PS; 121 bhp)
Applications:
- 1986–1989 W460 200GE.
M102.980
[edit]The M102.980 was a 2.3 L version with a 95.5 mm (3.76 in) bore and the same 80.25 mm (3.16 in) stroke. Engine weight was 118 kg (260 lb). Used K-Jetronic fuel injection. Cubic capacity: 2,299 cc (2.3 L). Power output: 100 kW (136 PS; 134 bhp)
Applications:
- 1980–1986 W123 230E
- 1980–1986 W123 230CE
- 1980–1986 W123 230TE
M102.981
[edit]The M102.981 was a 2.3 L version with a 95.5 mm (3.76 in) bore and the same 80.25 mm (3.16 in) stroke. Cubic capacity: 2,299 cc (2.3 L). Power output: 92 kW (125 PS; 123 bhp)
Applications:
- 1979–1989 W460 230GE Geländewagen
M102.982
[edit]Similar to the M102.980 version, but with the newer KE-Jetronic system from Bosch. Cubic capacity: 2,299 cc (2.3 L). Power output: 97 kW (132 PS; 130 bhp)
Applications:
- 1985–1992 W124 230E
- 1985–1992 W124 230CE
- 1985–1992 W124 230TE
M102.983
[edit]A 16-valve version of the M102.985 with cylinder head designed by Cosworth.Cubic capacity: 2,299 cc (2.3 L). Power output: 138 kW (188 PS; 185 bhp); USA: 125 kW (170 PS; 168 bhp)
Applications:
- 1986–1987 W201 190E 2.3-16
- 1985–1989 Isdera Spyder 033i 2.3-16V
M102.985
[edit]An 8-valve M102 with a displacement of 2.3 L used in the W201 chassis with KE-Jetronic fuel injection. Cubic capacity: 2,299 cc (2.3 L). Power output: 97 kW (132 PS; 130 bhp)
Applications:
- 1985–1992 W201 190 E 2.3
M102.990
[edit]An update of the 16-valve version with increased capacity (2.5 L) and stiffening ribs, still with a cylinder head designed by Cosworth. Cubic capacity: 2,498 cc (2.5 L). Power output: 150 kW (204 PS; 201 bhp)
Applications:
- 1988–1993 W201 190E 2.5-16
M102.991
[edit]An update of the 2.5 16-valve version, with shorter stroke and larger bore. H beam rods and piston cooling jets. Cubic capacity: 2,463 cc (2.5 L). Power output: 147 kW (200 PS; 197 bhp)
Applications:
M102.992
[edit]An update of the 102.991 version with removal of four crankshaft counterweights and even more stiffening ribs for higher RPMs. Single timing chain, oil pump with separate drive chain. Bigger intake manifold, camshaft and exhaust system. Higher compression ratio 10.5:1. Cubic capacity: 2,463 cc (2.5 L). Power output: 173 kW (235 PS; 232 bhp)
Applications:
See also
[edit]References
[edit]- ^ Hogsten, Dag E. (1982-10-06). "Prestige till varje pris" [Prestige at any cost]. Teknikens Värld (in Swedish). Vol. 34, no. 21. Stockholm, Sweden: Specialtidningsförlaget AB. p. 26.