Radio over fiber

Radio over Fiber (RoF) refers to a technology whereby light is modulated by a radio signal and transmitted over an optical fiber link to facilitate wireless access. Although radio transmission over fiber is used for multiple purposes, such as in cable television (CATV) networks and in satellite base stations, the term RoF is usually applied when this is done for wireless access.

In RoF systems, wireless signals are transported in optical form between a central station and a set of base stations before being radiated through the air. Each base station is adapted to communicate over a radio link with at least one user's mobile station located within the radio range of said base station.

RoF transmission systems are usually classified into two main categories (RF-over-Fiber ; IF-over-Fiber) depending on the frequency range of the radio signal to be transported.

a) In RF-over-Fiber architecture, a data-carrying RF (Radio Frequency) signal with a high frequenty (usually greater than 10 GHz) is imposed on a lightwave signal before being transported over the optical link. Therefore, wireless signals are optically distributed to base stations directly at high frequencies and converted to from optical to electrical domain at the base stations before being amplified and radiated by an antenna. As a result, no frequency up/down conversion is required at the various base station, thereby resulting in simple and rather cost-effective implementation is enabled at the base stations.

b) In IF-over-Fiber architecture, an IF (Intermediate Frequency) radio signal with a lower frequency (less than 10 GHz) is used for modulating light before being transported over the optical link. Therefore, wireless signals are transported at intermediate frequency over the optical.

Advantages of Radio-over-Fiber

Low Attenuation

It is a well known fact that signals transmitted on optical fiber attenuate much less that other medium, especially when compared to wireless medium. By using optical fiber, the signal will travel further reducing the need of repeaters.

Low Complexity

RoF makes use of the concept of a Remote Station (RS). This station only consists an optical-to-electrical (O/E) ( and an optional frequency up or down converter), amplifiers, and the antenna. This means that the resource management and signal generation circuitry of the Base Station can be moved to a centralized location and shared between several remote stations, thus simplifying the architecture.

Lower Cost

Simpler structure of remote base station means lower cost of infrastructure, lower power consumption by devices and simpler maintenance all contributed to lowering the overall installation and maintenance cost. Further reduction can also be made by use of low cost Graded Index Polymer Optical Fiber (GIPOF)

Future Proof

Fiber Optics are designed to handle gigabits speeds which means they will be able to handle speeds offered by future generations of networks for years to come. RoF technology is also protocol and bit-rate transparent, hence, can be employed to use any current and future technologies.

Applications of Radio-over-fiber

Access to dead zones

An important application of RoF is its use to provide wireless coverage in the area where wireless backhaul link is not possible. These zones can be areas inside a structure such as a tunnel, areas behind buildings, Mountainous places or secluded areas such a jungle.

FTTA (Fiber to the Antenna)

By using an optical connection directly to the antenna, the equipment vendor can gain several advantages like low line losses, immunity to lightening strikes/electric discharges and reduced complexity of base station by attaching light weight Optical-to-Electrical (O/E) converter directly to antenna.