Akers Mill
| Akers Mill | |
|---|---|
 Ruined Foundation Flagstones of Akers Mill | |
| Standort | Cobb, Georgia, USA |
| Nearest city | Atlanta, GA |
History
Akers Mill, was a complex of at least two 19th Century mills along Rottenwood Creek in Cobb County, Georgia. The gristmill built into the bank overlooking the creek, with six terraces each acting as an individual floor in the mill operation. The mills developed shortly before the Civil War, were sold to the Akers family in 1873 and in turn were utilized for the production of flour and meal for their Atlanta area grocery stores. The Akers' cut out and graded new roads to the mill and also farmed the nearby land. Additionally, they employed about 60 people and constructed housing in a small village south of the mills.
Production
The gristmill's location on the banks of the creek, allowed it to take advantage of it's natural water power. Rottenwood Creek's flow reached 720 cfm (Cubic Feet per Minute) during that time. On March 25, 1880, an article in the Marietta Journal reported, Akers Mill had installed a new process of milling that increased from 39 to 43 pounds the amount of flour extracted from a bushel of wheat. Additionally, they were able to provide a finer grade of flour for consumption. The flour mill was capable of producing 200 barrels (195 pounds each) of flour daily, while the corn mill could produce 1,500 bushels of corn meal in the same period. The flour meal was power by a 36-inch turbine, supplemented by an 80-horsepower engine in the event water was scarce. Also, the 1880 Census records indicate the first mill's turbine was under a 23 foot head and the second mill's was below a 26 foot head.
Present
Akers Mill went underwent bankruptcy in 1879 and closed sometime afterwards. As, the Atlanta area grew the forgotten gristmill became derelicit and on August 15, 1978 it's remnants were protected by the National Park Service, as part of the Chattahoochee River National Recreation Area. In early 1990s, an archeological survey investigation was done on the area as part of the Kennedy Parkway Project. The intact terraces and deposits allowed the archeological study to address the internal technological structure of the mill, a historical dimension rarely recovered archeologically since technological equipment was normally removed from mill buildings prior to their demolition or collapse. A limited recovery was done on an area of the site that could not be saved, however it seemed part of a domestic occupation, rather than the primary industrial use. Currently, the terraces and the old flagstone foundations remain standing near the Rottenwood Creek Multi-Use Trail on the waterway. Modern-day Akers Mill Road is the namesake of the former mill and is located below it's intersection with Cumberland Boulevard.
References
The Riverkeeper's Guide to the Chattahoochee. Fred Brown, Sherri M. L. Smith. 1997