AKS Legacy Container Networking Interfaces (CNI)
In Azure Kubernetes Service (AKS), while Azure CNI Overlay and Azure CNI Pod Subnet are recommended for most scenarios, legacy networking models such as Azure CNI Node Subnet and kubenet are still available and supported. These legacy models offer different approaches to pod IP address management and networking, each with its own set of capabilities and considerations. This article provides an overview of these legacy networking options, detailing their prerequisites, deployment parameters, and key characteristics to help you understand their roles and how they can be used effectively within your AKS clusters.
Prerequisites
The following prerequisites are required for Azure CNI Node Subnet and kubenet:
The virtual network for the AKS cluster must allow outbound internet connectivity.
AKS clusters can't use
169.254.0.0/16
,172.30.0.0/16
,172.31.0.0/16
, or192.0.2.0/24
for the Kubernetes service address range, pod address range, or cluster virtual network address range.The cluster identity used by the AKS cluster must have at least Network Contributor permissions on the subnet within the virtual network. If you want to define a custom role instead of using the built-in Network Contributor role, the following permissions are required:
Microsoft.Network/virtualNetworks/subnets/join/action
Microsoft.Network/virtualNetworks/subnets/read
Microsoft.Authorization/roleAssignments/write
The subnet assigned to the AKS node pool can't be a delegated subnet.
- AKS doesn't apply Network Security Groups (NSGs) to its subnet and doesn't modify any of the NSGs associated with that subnet. If you provide your own subnet and add NSGs associated with that subnet, make sure the security rules in the NSGs allow traffic within the node CIDR range. For more information, see Network security groups.
Note
Kubenet isn't available for Windows Server containers. To use Windows Server node pools, you need to use Azure CNI.
Azure CNI Node Subnet
With Azure Container Networking Interface (CNI), every pod gets an IP address from the subnet and can be accessed directly. Systems in the same virtual network as the AKS cluster see the pod IP as the source address for any traffic from the pod. Systems outside the AKS cluster virtual network see the node IP as the source address for any traffic from the pod. These IP addresses must be unique across your network space and must be planned in advance. Each node has a configuration parameter for the maximum number of pods that it supports. The equivalent number of IP addresses per node are then reserved up front for that node. This approach requires more planning, and often leads to IP address exhaustion or the need to rebuild clusters in a larger subnet as your application demands grow.
With Azure CNI Node Subnet, each pod receives an IP address in the IP subnet and can communicate directly with other pods and services. Your clusters can be as large as the IP address range you specify. However, you must plan the IP address range in advance, and all the IP addresses are consumed by the AKS nodes based on the maximum number of pods they can support. Advanced network features and scenarios such as virtual nodes or Network Policies (either Azure or Calico) are supported with Azure CNI.
Deployment parameters
When you create an AKS cluster, the following parameters are configurable for Azure CNI networking:
Virtual network: The virtual network into which you want to deploy the Kubernetes cluster. You can create a new virtual network or use an existing one. If you want to use an existing virtual network, make sure it's in the same location and Azure subscription as your Kubernetes cluster. For information about the limits and quotas for an Azure virtual network, see Azure subscription and service limits, quotas, and constraints.
Subnet: The subnet within the virtual network where you want to deploy the cluster. You can add new subnets into the virtual network during the cluster creation process. For hybrid connectivity, the address range shouldn't overlap with any other virtual networks in your environment.
Azure Network Plugin: When Azure network plugin is used, the internal LoadBalancer service with "externalTrafficPolicy=Local" can't be accessed from VMs with an IP in clusterCIDR that doesn't belong to AKS cluster.
Kubernetes service address range: This parameter is the set of virtual IPs that Kubernetes assigns to internal services in your cluster. This range can't be updated after you create your cluster. You can use any private address range that satisfies the following requirements:
- Must not be within the virtual network IP address range of your cluster.
- Must not overlap with any other virtual networks with which the cluster virtual network peers.
- Must not overlap with any on-premises IPs.
- Must not be within the ranges
169.254.0.0/16
,172.30.0.0/16
,172.31.0.0/16
, or192.0.2.0/24
.
While it's possible to specify a service address range within the same virtual network as your cluster, we don't recommend it. Overlapping IP ranges can result in unpredictable behavior. For more information, see the FAQ. For more information on Kubernetes services, see Services in the Kubernetes documentation.
Kubernetes DNS service IP address: The IP address for the cluster's DNS service. This address must be within the Kubernetes service address range. Don't use the first IP address in your address range. The first address in your subnet range is used for the kubernetes.default.svc.cluster.local address.
Kubenet
AKS clusters use kubenet and create an Azure virtual network and subnet for you by default. With kubenet, nodes get an IP address from the Azure virtual network subnet. Pods receive an IP address from a logically different address space to the Azure virtual network subnet of the nodes. Network address translation (NAT) is then configured so the pods can reach resources on the Azure virtual network. The source IP address of the traffic is NAT'd to the node's primary IP address. This approach greatly reduces the number of IP addresses you need to reserve in your network space for pods to use.
You can configure the maximum pods deployable to a node at cluster creation time or when creating new node pools. If you don't specify maxPods
when creating new node pools, you receive a default value of 110 for kubenet.
Overview of kubenet networking with your own subnet
In many environments, you have defined virtual networks and subnets with allocated IP address ranges, and you use these resources to support multiple services and applications. To provide network connectivity, AKS clusters can use kubenet (basic networking) or Azure CNI (advanced networking).
With kubenet, only the nodes receive an IP address in the virtual network subnet. Pods can't communicate directly with each other. Instead, User Defined Routing (UDR) and IP forwarding handle connectivity between pods across nodes. UDRs and IP forwarding configuration is created and maintained by the AKS service by default, but you can bring your own route table for custom route management if you want. You can also deploy pods behind a service that receives an assigned IP address and load balances traffic for the application. The following diagram shows how the AKS nodes receive an IP address in the virtual network subnet, but not the pods:
Azure supports a maximum of 400 routes in a UDR, so you can't have an AKS cluster larger than 400 nodes. AKS virtual nodes and Azure Network Policies aren't supported with kubenet. Calico Network Policies are supported.
Limitations & considerations for kubenet
- An additional hop is required in the design of kubenet, which adds minor latency to pod communication.
- Route tables and user-defined routes are required for using kubenet, which adds complexity to operations.
- For more information, see Customize cluster egress with a user-defined routing table in AKS and Customize cluster egress with outbound types in AKS.
- Direct pod addressing isn't supported for kubenet due to kubenet design.
- Unlike Azure CNI clusters, multiple kubenet clusters can't share a subnet.
- AKS doesn't apply Network Security Groups (NSGs) to its subnet and doesn't modify any of the NSGs associated with that subnet. If you provide your own subnet and add NSGs associated with that subnet, you must ensure the security rules in the NSGs allow traffic between the node and pod CIDR. For more details, see Network security groups.
- Eigenschaften not supported on kubenet include:
Note
Some of the system pods such as konnectivity within the cluster use the host node IP address rather than an IP from the overlay address space. The system pods will only use the node IP and not an IP address from the virtual network.
IP address availability and exhaustion
A common issue with Azure CNI is that the assigned IP address range is too small to then add more nodes when you scale or upgrade a cluster. The network team also might not be able to issue a large enough IP address range to support your expected application demands. As a compromise, you can create an AKS cluster that uses kubenet and connect to an existing virtual network subnet. This approach lets the nodes receive defined IP addresses without the need to reserve a large number of IP addresses up front for any potential pods that could run in the cluster.
With kubenet, you can use a much smaller IP address range and support large clusters and application demands. For example, with a /27 IP address range on your subnet, you can run a 20-25 node cluster with enough room to scale or upgrade. This cluster size can support up to 2,200-2,750 pods (with a default maximum of 110 pods per node). The maximum number of pods per node that you can configure with kubenet in AKS is 250.
The following basic calculations compare the difference in network models:
- kubenet: A simple /24 IP address range can support up to 251 nodes in the cluster. Each Azure virtual network subnet reserves the first three IP addresses for management operations. This node count can support up to 27,610 pods, with a default maximum of 110 pods per node.
- Azure CNI: That same basic /24 subnet range can only support a maximum of 8 nodes in the cluster. This node count can only support up to 240 pods, with a default maximum of 30 pods per node.
Note
These maximums don't take into account upgrade or scale operations. In practice, you can't run the maximum number of nodes the subnet IP address range supports. You must leave some IP addresses available for scaling or upgrading operations.
Virtual network peering and ExpressRoute connections
You can use Azure virtual network peering or ExpressRoute connections with Azure CNI and kubenet to provide on-premises connectivity. Make sure you plan your IP addresses carefully to prevent overlap and incorrect traffic routing. For example, many on-premises networks use a 10.0.0.0/8 address range that's advertised over the ExpressRoute connection. We recommend creating your AKS clusters in Azure virtual network subnets outside of this address range, such as 172.16.0.0/16.
For more information, see Compare network models and their support scopes.
Azure CNI Pod Subnet frequently asked questions
Can I deploy VMs in my cluster subnet?
Yes for Azure CNI Node Subnet, the VMs can be deployed in the same subnet as the AKS cluster.
What source IP do external systems see for traffic that originates in an Azure CNI-enabled pod?
Systems in the same virtual network as the AKS cluster see the pod IP as the source address for any traffic from the pod. Systems outside the AKS cluster virtual network see the node IP as the source address for any traffic from the pod. But for Azure CNI dynamic IP allocation, no matter the connection is inside the same virtual network or cross virtual networks, the pod IP is always the source address for any traffic from the pod. This is because the Azure CNI for dynamic IP allocation implements Microsoft Azure Container Networking infrastructure, which gives end-to-end experience. Hence, it eliminates the use of
ip-masq-agent
, which is still used by traditional Azure CNI.Can I configure per-pod network policies?
Yes, Kubernetes network policy is available in AKS. To get started, see Secure traffic between pods by using network policies in AKS.
Is the maximum number of pods deployable to a node configurable?
By default, AKS clusters use kubenet and create a virtual network and subnet. With kubenet, nodes get an IP address from a virtual network subnet. Network address translation (NAT) is then configured on the nodes, and pods receive an IP address "hidden" behind the node IP. This approach reduces the number of IP addresses that you need to reserve in your network space for pods to use.
With Azure Container Networking Interface (CNI), every pod gets an IP address from the subnet and can be accessed directly. Systems in the same virtual network as the AKS cluster see the pod IP as the source address for any traffic from the pod. Systems outside the AKS cluster virtual network see the node IP as the source address for any traffic from the pod. These IP addresses must be unique across your network space and must be planned in advance. Each node has a configuration parameter for the maximum number of pods that it supports. The equivalent number of IP addresses per node are then reserved up front for that node. This approach requires more planning, and often leads to IP address exhaustion or the need to rebuild clusters in a larger subnet as your application demands grow.
Can I deploy VMs in my cluster subnet?
Yes. But for Azure CNI for dynamic IP allocation, the VMs cannot be deployed in pod's subnet.
What source IP do external systems see for traffic that originates in an Azure CNI-enabled pod?
Systems in the same virtual network as the AKS cluster see the pod IP as the source address for any traffic from the pod. Systems outside the AKS cluster virtual network see the node IP as the source address for any traffic from the pod.
But for Azure CNI for dynamic IP allocation, no matter the connection is inside the same virtual network or cross virtual networks, the pod IP is always the source address for any traffic from the pod. This is because the Azure CNI for dynamic IP allocation implements Microsoft Azure Container Networking infrastructure, which gives end-to-end experience. Hence, it eliminates the use of
ip-masq-agent
, which is still used by traditional Azure CNI.Can I use a different subnet within my cluster virtual network for the Kubernetes service address range?
It's not recommended, but this configuration is possible. The service address range is a set of virtual IPs (VIPs) that Kubernetes assigns to internal services in your cluster. Azure Networking has no visibility into the service IP range of the Kubernetes cluster. The lack of visibility into the cluster's service address range can lead to issues. It's possible to later create a new subnet in the cluster virtual network that overlaps with the service address range. If such an overlap occurs, Kubernetes could assign a service an IP that's already in use by another resource in the subnet, causing unpredictable behavior or failures. By ensuring you use an address range outside the cluster's virtual network, you can avoid this overlap risk. Yes, when you deploy a cluster with the Azure CLI or a Resource Manager template. See Maximum pods per node.
Can I use a different subnet within my cluster virtual network for the Kubernetes service address range?
It's not recommended, but this configuration is possible. The service address range is a set of virtual IPs (VIPs) that Kubernetes assigns to internal services in your cluster. Azure Networking has no visibility into the service IP range of the Kubernetes cluster. The lack of visibility into the cluster's service address range can lead to issues. It's possible to later create a new subnet in the cluster virtual network that overlaps with the service address range. If such an overlap occurs, Kubernetes could assign a service an IP that's already in use by another resource in the subnet, causing unpredictable behavior or failures. By ensuring you use an address range outside the cluster's virtual network, you can avoid this overlap risk.
Azure Kubernetes Service