Azure HDInsight double encryption for data at rest
This article discusses methods for encryption of data at rest in Azure HDInsight clusters. Data encryption at rest refers to encryption on managed disks (data disks, OS disks and temporary disks) attached to HDInsight cluster virtual machines.
This document doesn't address data stored in your Azure Storage account. Your clusters may have one or more attached Azure Storage accounts where the encryption keys could also be Microsoft-managed or customer-managed, but the encryption service is different. For more information about Azure Storage encryption, see Azure Storage encryption for data at rest.
Einführung
There are three main managed disk roles in Azure: the data disk, the OS disk, and the temporary disk. For more information about different types of managed disks, see Introduction to Azure managed disks.
HDInsight supports multiple types of encryption in two different layers:
- Server Side Encryption (SSE) - SSE is performed by the storage service. In HDInsight, SSE is used to encrypt OS disks and data disks. It is enabled by default. SSE is a layer 1 encryption service.
- Encryption at host using platform-managed key - Similar to SSE, this type of encryption is performed by the storage service. However, it is only for temporary disks and is not enabled by default. Encryption at host is also a layer 1 encryption service.
- Encryption at rest using customer managed key - This type of encryption can be used on data and temporary disks. It is not enabled by default and requires the customer to provide their own key through Azure key vault. Encryption at rest is a layer 2 encryption service.
These types are summarized in the following table.
Cluster type | OS Disk (Managed disk) | Data disk (Managed disk) | Temp data disk (Local SSD) |
---|---|---|---|
Kafka, HBase with Accelerated writes | Layer 1: SSE Encryption by default | Layer 1: SSE Encryption by default, Layer 2: Optional encryption at rest using CMK | Layer 1: Optional Encryption at host using PMK, Layer 2: Optional encryption at rest using CMK |
All other clusters (Spark, Interactive, Hadoop, HBase without Accelerated writes) | Layer 1: SSE Encryption by default | K.A. | Layer 1: Optional Encryption at host using PMK, Layer 2: Optional encryption at rest using CMK |
Encryption at rest using Customer-managed keys
Customer-managed key encryption is a one-step process handled during cluster creation at no additional cost. All you need to do is to authorize a managed identity with Azure Key Vault and add the encryption key when you create your cluster.
Both data disks and temporary disks on each node of the cluster are encrypted with a symmetric Data Encryption Key (DEK). The DEK is protected using the Key Encryption Key (KEK) from your key vault. The encryption and decryption processes are handled entirely by Azure HDInsight.
For OS disks attached to the cluster VMs only one layer of encryption (PMK) is available. It is recommended that customers avoid copying sensitive data to OS disks if having a CMK encryption is required for their scenarios.
If the key vault firewall is enabled on the key vault where the disk encryption key is stored, the HDInsight regional Resource Provider IP addresses for the region where the cluster will be deployed must be added to the key vault firewall configuration. This is necessary because HDInsight is not a trusted Azure key vault service.
You can use the Azure portal or Azure CLI to safely rotate the keys in the key vault. When a key rotates, the HDInsight cluster starts using the new key within minutes. Enable the Soft Delete key protection features to protect against ransomware scenarios and accidental deletion. Key vaults without this protection feature aren't supported.
Get started with customer-managed keys
To create a customer-managed key enabled HDInsight cluster, we'll go through the following steps:
- Create managed identities for Azure resources
- Create Azure Key Vault
- Create key
- Create access policy
- Create HDInsight cluster with customer-managed key enabled
- Rotating the encryption key
Each step is explained in one of the following sections in detail.
Create managed identities for Azure resources
Create a user-assigned managed identity to authenticate to Key Vault.
See Create a user-assigned managed identity for specific steps. For more information on how managed identities work in Azure HDInsight, see Managed identities in Azure HDInsight. Be sure to save the managed identity resource ID for when you add it to the Key Vault access policy.
Create Azure Key Vault
Create a key vault. See Create Azure Key Vault for specific steps.
HDInsight only supports Azure Key Vault. If you have your own key vault, you can import your keys into Azure Key Vault. Remember that the key vault must have Soft delete enabled. For more information about importing existing keys, visit About keys, secrets, and certificates.
Create key
From your new key vault, navigate to Settings > Keys > + Generate/Import.
Provide a name, then select Create. Maintain the default Key Type of RSA.
When you return to the Keys page, select the key you created.
Select the version to open the Key Version page. When you use your own key for HDInsight cluster encryption, you need to provide the key URI. Copy the Key identifier and save it somewhere until you're ready to create your cluster.
Create access policy
From your new key vault, navigate to Settings > Access policies > + Add Access Policy.
From the Add access policy page, provide the following information:
Property Description Key Permissions Select Get, Unwrap Key, and Wrap Key. Secret Permissions Select Get, Set, and Delete. Select principal Select the user-assigned managed identity you created earlier. Select Add.
Select Save.
Create cluster with customer-managed key disk encryption
You're now ready to create a new HDInsight cluster. Customer-managed keys can only be applied to new clusters during cluster creation. Encryption can't be removed from customer-managed key clusters, and customer-managed keys can't be added to existing clusters.
Beginning with the November 2020 release, HDInsight supports the creation of clusters using both versioned and version-less key URIs. If you create the cluster with a version-less key URI, then the HDInsight cluster will try to perform key auto-rotation when the key is updated in your Azure Key Vault. If you create the cluster with a versioned key URI, you will have to perform a manual key rotation as discussed in Rotating the encryption key.
For clusters created before the November 2020 release, you will have to perform key rotation manually using the versioned key URI.
VM types that support disk encryption
Size | vCPU | Memory: GiB |
---|---|---|
Standard_D4a_v4 | 4 | 16 |
Standard_D8a_v4 | 8 | 32 |
Standard_D16a_v4 | 16 | 64 |
Standard_D32a_v4 | 32 | 128 |
Standard_D48a_v4 | 48 | 192 |
Standard_D64a_v4 | 64 | 256 |
Standard_D96a_v4 | 96 | 384 |
Standard_E64is_v3 | 64 | 432 |
Standard_E20s_V3 | 20 | 160 |
Standard_E2s_V3 | 2 | 16 |
Standard_E2a_v4 | 2 | 16 |
Standard_E4a_v4 | 4 | 32 |
Standard_E8a_v4 | 8 | 64 |
Standard_E16a_v4 | 16 | 128 |
Standard_E20a_v4 | 20 | 160 |
Standard_E32a_v4 | 32 | 256 |
Standard_E48a_v4 | 48 | 384 |
Standard_E64a_v4 | 64 | 512 |
Standard_E96a_v4 | 96 | 672 |
Standard_DS3_v2 | 4 | 14 |
Standard_DS4_v2 | 8 | 28 |
Standard_DS5_v2 | 16 | 56 |
Standard_DS12_v2 | 4 | 28 |
Standard_DS13_v2 | 8 | 56 |
Standard_DS14_v2 | 16 | 112 |
Using the Azure portal
During cluster creation, you can either use a versioned key, or a versionless key in the following way:
- Versioned - During cluster creation, provide the full Key identifier, including the key version. For example,
https://contoso-kv.vault.azure.net/keys/myClusterKey/46ab702136bc4b229f8b10e8c2997fa4
. - Versionless - During cluster creation, provide only the Key identifier. For example,
https://contoso-kv.vault.azure.net/keys/myClusterKey
.
You also need to assign the managed identity to the cluster.
Using Azure CLI
The following example shows how to use Azure CLI to create a new Apache Spark cluster with disk encryption enabled. For more information, see Azure CLI az hdinsight create. The parameter encryption-key-version
is optional.
az hdinsight create -t spark -g MyResourceGroup -n MyCluster \
-p "HttpPassword1234!" --workernode-data-disks-per-node 2 \
--storage-account MyStorageAccount \
--encryption-key-name SparkClusterKey \
--encryption-key-version 00000000000000000000000000000000 \
--encryption-vault-uri https://MyKeyVault.vault.azure.net \
--assign-identity MyMSI
Using Azure Resource Manager templates
The following example shows how to use an Azure Resource Manager template to create a new Apache Spark cluster with disk encryption enabled. For more information, see What are ARM templates?. The resource manager template property diskEncryptionKeyVersion
is optional.
This example uses PowerShell to call the template.
$templateFile = "azuredeploy.json"
$ResourceGroupName = "MyResourceGroup"
$clusterName = "MyCluster"
$password = ConvertTo-SecureString 'HttpPassword1234!' -AsPlainText -Force
$diskEncryptionVaultUri = "https://MyKeyVault.vault.azure.net"
$diskEncryptionKeyName = "SparkClusterKey"
$diskEncryptionKeyVersion = "00000000000000000000000000000000"
$managedIdentityName = "MyMSI"
New-AzResourceGroupDeployment `
-Name mySpark `
-TemplateFile $templateFile `
-ResourceGroupName $ResourceGroupName `
-clusterName $clusterName `
-clusterLoginPassword $password `
` -sshPassword $password `
-diskEncryptionVaultUri $diskEncryptionVaultUri `
-diskEncryptionKeyName $diskEncryptionKeyName `
-diskEncryptionKeyVersion $diskEncryptionKeyVersion `
-managedIdentityName $managedIdentityName
The contents of the resource management template, azuredeploy.json
:
{
"$schema": "https://schema.management.azure.com/schemas/2019-04-01/deploymentTemplate.json#",
"contentVersion": "0.9.0.0",
"parameters": {
"clusterName": {
"type": "string",
"metadata": {
"description": "The name of the HDInsight cluster to create."
}
},
"clusterLoginUserName": {
"type": "string",
"defaultValue": "admin",
"metadata": {
"description": "These credentials can be used to submit jobs to the cluster and to log into cluster dashboards."
}
},
"clusterLoginPassword": {
"type": "securestring",
"metadata": {
"description": "The password must be at least 10 characters in length and must contain at least one digit, one non-alphanumeric character, and one upper or lower case letter."
}
},
"location": {
"type": "string",
"defaultValue": "[resourceGroup().location]",
"metadata": {
"description": "The location where all azure resources will be deployed."
}
},
"sshUserName": {
"type": "string",
"defaultValue": "sshuser",
"metadata": {
"description": "These credentials can be used to remotely access the cluster."
}
},
"sshPassword": {
"type": "securestring",
"metadata": {
"description": "The password must be at least 10 characters in length and must contain at least one digit, one non-alphanumeric character, and one upper or lower case letter."
}
},
"headNodeSize": {
"type": "string",
"defaultValue": "Standard_D12_v2",
"metadata": {
"description": "The VM size of the head nodes."
}
},
"workerNodeSize": {
"type": "string",
"defaultValue": "Standard_D13_v2",
"metadata": {
"description": "The VM size of the worker nodes."
}
},
"diskEncryptionVaultUri": {
"type": "string",
"metadata": {
"description": "The Key Vault DNSname."
}
},
"diskEncryptionKeyName": {
"type": "string",
"metadata": {
"description": "The Key Vault key name."
}
},
"diskEncryptionKeyVersion": {
"type": "string",
"metadata": {
"description": "The Key Vault key version for the selected key."
}
},
"managedIdentityName": {
"type": "string",
"metadata": {
"description": "The user-assigned managed identity."
}
}
},
"variables": {
"defaultStorageAccount": {
"name": "[uniqueString(resourceGroup().id)]",
"type": "Standard_LRS"
}
},
"resources": [
{
"type": "Microsoft.Storage/storageAccounts",
"name": "[variables('defaultStorageAccount').name]",
"location": "[parameters('location')]",
"apiVersion": "2019-06-01",
"sku": {
"name": "[variables('defaultStorageAccount').type]"
},
"kind": "Storage",
"properties": {}
},
{
"apiVersion": "2018-06-01-preview",
"name": "[parameters('clusterName')]",
"type": "Microsoft.HDInsight/clusters",
"location": "[parameters('location')]",
"properties": {
"clusterVersion": "3.6",
"osType": "Linux",
"tier": "standard",
"clusterDefinition": {
"kind": "spark",
"componentVersion": {
"Spark": "2.3"
},
"configurations": {
"gateway": {
"restAuthCredential.isEnabled": true,
"restAuthCredential.username": "[parameters('clusterLoginUserName')]",
"restAuthCredential.password": "[parameters('clusterLoginPassword')]"
}
}
},
"storageProfile": {
"storageaccounts": [
{
"name": "[replace(replace(reference(resourceId('Microsoft.Storage/storageAccounts', variables('defaultStorageAccount').name), '2019-06-01').primaryEndpoints.blob,'https://',''),'/','')]",
"isDefault": true,
"container": "[parameters('clusterName')]",
"key": "[listKeys(resourceId('Microsoft.Storage/storageAccounts', variables('defaultStorageAccount').name), '2019-06-01').keys[0].value]"
}
]
},
"computeProfile": {
"roles": [
{
"name": "headnode",
"minInstanceCount": 1,
"targetInstanceCount": 2,
"hardwareProfile": {
"vmSize": "[parameters('headNodeSize')]"
},
"osProfile": {
"linuxOperatingSystemProfile": {
"username": "[parameters('sshUserName')]",
"password": "[parameters('sshPassword')]"
},
},
},
{
"name": "workernode",
"targetInstanceCount": 1,
"hardwareProfile": {
"vmSize": "[parameters('workerNodeSize')]"
},
"osProfile": {
"linuxOperatingSystemProfile": {
"username": "[parameters('sshUserName')]",
"password": "[parameters('sshPassword')]"
},
},
}
]
},
"minSupportedTlsVersion": "1.2",
"diskEncryptionProperties": {
"vaultUri": "[parameters('diskEncryptionVaultUri')]",
"keyName": "[parameters('diskEncryptionKeyName')]",
"keyVersion": "[parameters('diskEncryptionKeyVersion')]",
"msiResourceId": "[resourceID('Microsoft.ManagedIdentity/userAssignedIdentities/', parameters('managedIdentityName'))]"
}
},
"identity": {
"type": "UserAssigned",
"userAssignedIdentities": {
"[resourceID('Microsoft.ManagedIdentity/userAssignedIdentities/', parameters('managedIdentityName'))]": {}
}
}
}
]
}
Rotating the encryption key
You can change the encryption keys used on your running cluster, using the Azure portal or Azure CLI. For this operation, the cluster must have access to both the current key and the intended new key, otherwise the rotate key operation will fail. For clusters created after the November 2020 release you can choose if you want to your new key to have a version or not. For clusters created before the November 2020 release, you must use a versioned key when rotating the encryption key.
Using the Azure portal
To rotate the key, you need the base key vault URI. Once you've done that, go to the HDInsight cluster properties section in the portal and click on Change Key under Disk Encryption Key URL. Enter in the new key url and submit to rotate the key.
Using Azure CLI
The following example shows how to rotate the disk encryption key for an existing HDInsight cluster. For more information, see Azure CLI az hdinsight rotate-disk-encryption-key.
az hdinsight rotate-disk-encryption-key \
--encryption-key-name SparkClusterKey \
--encryption-key-version 00000000000000000000000000000000 \
--encryption-vault-uri https://MyKeyVault.vault.azure.net \
--name MyCluster \
--resource-group MyResourceGroup
FAQ for customer-managed key encryption
How does the HDInsight cluster access my key vault?
HDInsight accesses your Azure Key Vault instance using the managed identity that you associate with the HDInsight cluster. This managed identity can be created before or during cluster creation. You also need to grant the managed identity access to the key vault where the key is stored.
Is this feature available for all clusters on HDInsight?
Customer-managed key encryption is available for all cluster types except Spark 2.1 and 2.2.
Can I use multiple keys to encrypt different disks or folders?
No, all managed disks and resource disks are encrypted by the same key.
What happens if the cluster loses access to the key vault or the key?
If the cluster loses access to the key, warnings will be shown in the Apache Ambari portal. In this state, the Change Key operation will fail. Once key access is restored, Ambari warnings will go away and operations such as key rotation can be successfully performed.
How can I recover the cluster if the keys are deleted?
Since only "Soft Delete" enabled keys are supported, if the keys are recovered in the key vault, the cluster should regain access to the keys. To recover an Azure Key Vault key, see Undo-AzKeyVaultKeyRemoval or az-keyvault-key-recover.
If a cluster is scaled up, will the new nodes support customer-managed keys seamlessly?
Yes. The cluster needs access to the key in the key vault during scale up. The same key is used to encrypt both managed disks and resource disks in the cluster.
Are customer-managed keys available in my location?
HDInsight customer-managed keys are available in all public clouds and national clouds.
Encryption at host using platform-managed keys
Enable in the Azure portal
Encryption at host can be enabled during cluster creation in the Azure portal.
Note
When encryption at host is enabled, you cannot add applications to your HDInsight cluster from the Azure marketplace.
This option enables encryption at host for HDInsight VMs temp data disks using PMK. Encryption at host is only supported on certain VM SKUs in limited regions and HDInsight supports the following node configuration and SKUs.
To understand the right VM size for your HDInsight cluster see Selecting the right VM size for your Azure HDInsight cluster. The default VM SKU for Zookeeper node when encryption at host is enabled will be DS2V2.
Enable using PowerShell
The following code snippet shows how you can create a new Azure HDInsight cluster that has encryption at host enabled using PowerShell. It uses the parameter -EncryptionAtHost $true
to enable the feature.
$storageAccountResourceGroupName = "Group"
$storageAccountName = "yourstorageacct001"
$storageAccountKey = Get-AzStorageAccountKey `
-ResourceGroupName $storageAccountResourceGroupName `
-Name $storageAccountName | %{ $_.Key1 }
$storageContainer = "container002"
# Cluster configuration info
$location = "East US 2"
$clusterResourceGroupName = "Group"
$clusterName = "your-hadoop-002"
$clusterCreds = Get-Credential
# If the cluster's resource group doesn't exist yet, run:
# New-AzResourceGroup -Name $clusterResourceGroupName -Location $location
# Create the cluster
New-AzHDInsightCluster `
-ClusterType Hadoop `
-ClusterSizeInNodes 4 `
-ResourceGroupName $clusterResourceGroupName `
-ClusterName $clusterName `
-HttpCredential $clusterCreds `
-Location $location `
-DefaultStorageAccountName "$storageAccountName.blob.core.contoso.net" `
-DefaultStorageAccountKey $storageAccountKey `
-DefaultStorageContainer $storageContainer `
-SshCredential $clusterCreds `
-EncryptionAtHost $true `
Enable using Azure CLI
The following code snippet shows how you can create a new Azure HDInsight cluster that has encryption at host enabled, using Azure CLI. It uses the parameter --encryption-at-host true
to enable the feature.
az hdinsight create -t spark -g MyResourceGroup -n MyCluster \\
-p "yourpass" \\
--storage-account MyStorageAccount --encryption-at-host true
Next steps
- For more information about Azure Key Vault, see What is Azure Key Vault.
- Overview of enterprise security in Azure HDInsight.