Effect of fluoride varnish in combination with simulated oral environment on enamel-bracket shear bond strength

To determine the effect of fluoride varnish application combined with a simulated oral environment prior to bracket bonding on the shear bond strength (SBS) between brackets and tooth enamel. Sixty de-identified, extracted teeth were grouped to either receive or not receive fluoride varnish and then stored for 7 days at 37 °C in phosphate-buffered saline (PBS) solution or PBS combined with three 15-min cycles/day in a demineralizing solution to simulate pH variation following meals. Subsequently, brackets were bonded and after 24-h dark cure at 37 °C, debonded using shear forces in a simulated oral environment. The maximum shear force was used to calculate SBS, and the adhesive remnant index (ARI) was determined by image analysis of photos of the bracket mesh pad after debonding. A statistically higher SBS (10.16 MPa) was observed when fluoride varnish was applied prior to storage in PBS + demineralizing solution compared to SBS (6.38 MPa) following storage in the same solution without varnish application. Based on 37% effect size, this difference is also clinically relevant. In contrast, no significant differences in SBS were observed with varnish application combined with PBS with no demineralizing solution or between storage solution alone. Moreover, there was no significant difference in ARI due to varnish combined with either storage method or storage solution only. Results suggest varnish application prior to bracket bonding in combination with simulated oral environment that included acid exposure is beneficial in maintaining higher SBS between bracket and enamel. Despite higher SBS, adhesive remaining on enamel did not increase.