The presence of large quantities of Prosopis juliflora (PJ) fibers in natural habitats presents substantial threats to the environment and economies of numerous developing countries. Utilizing natural fibers in polymer composites can effectively enhance their characteristics. The primary objective of this study is to create a composite material by combining Prosopis Juliflora (PJ) fiber with a polylactic matrix that has been combined with zinc oxide nanofillers. The fabrication process will involve the hand layup technique. In order to have a comprehensive understanding of the mechanical characteristics, thermal behavior, and thermal stability of the PJ composite, it is necessary to undertake additional investigations. The results showed that the inclusion of zinc oxide filler enhanced the tensile strength (67.29 MPa), flexural strength (64.27 MPa), compressive strength (56.79 MPa), and impact energy (34 J) in sample S5. Additionally, the thermal properties, including thermal conductivity, thermal expansion, and short-term heat resistant capacity, were also improved by the addition of zinc oxide filler in sample S5. The deterioration temperature of the PJ composite was determined to be between 312 and 342 °C using thermogravimetric analysis. The failure mode of the PJ composite was investigated using scanning electron microscopy.
Keywords: Environmental Engineering, Microscopy, Natural composite; Sustainable materials.
© 2024 Published by Elsevier Ltd.