From the course: Electronics Foundations: Basic Circuits
Schalten Sie den kompletten Kurs noch heute frei
Join today to access over 23,300 courses taught by industry experts.
Solution: Camera flash
From the course: Electronics Foundations: Basic Circuits
Solution: Camera flash
- This was my thought process for solving the challenge. I began by considering the first requirement, to select a resistor value that would charge the capacitor as quickly as possible while also limiting the amount of current from the battery to be 15 milliamps or less. I know that the voltage across the resistor will change as the capacitor charges. Initially, when the voltage across the capacitor is zero, the resistor will have 9 volts across it. Then as the capacitor charges and its voltage increases, the voltage across the resistor will decrease until it reaches zero. Since the largest voltage across the resistor will be 9 volts, I used Ohm's Law to find a resistor value that would allow a current of 15 milliamps, which gave me a resistance of 600 ohms. That's not a standard resistor value so I rounded up to 680 ohms because I have a resistor with that value in my box of parts. Substituting that back into Ohm's Law…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Inhalt
-
-
-
-
-
-
-
What is a capacitor?5m 26s
-
(Locked)
Types of capacitors4m 12s
-
(Locked)
Read capacitor values4m 21s
-
(Locked)
Capacitor characteristics2m 48s
-
(Locked)
Capacitors in parallel2m 1s
-
(Locked)
Capacitors in series3m 53s
-
(Locked)
RC circuits6m 52s
-
(Locked)
Challenge: Camera flash2m 42s
-
(Locked)
Solution: Camera flash3m 23s
-
-
-
-
-
-