List of Standard
List of Standard
/MTD
(1 2010 )
PROGRAMME OF WORK
(AS ON 1 APRIL 2010)
()
Metallurgical Engineering Department
(MTD)
, 9
~ 110 002
B U R E A U O F I N D I A N S T A N D A R D S
MANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG,
NEW DELHI 110002
2
CONTENTS
COMMITTEE WISE PROGRAMME OF WORK OF
METALLURGICAL ENGINEERING DEPARTMENT
Sl.No. Sectional Committee Page
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
MTD 1 General Metallurgical Standards (Disbanded)..
MTD 2 Methods of Chemical Analysis of Ferrous Metals (Disbanded)
MTD 3 Mechanical Testing of Metals.
MTD 4 Wrought Steel Products..
MTD 5 Ferro Alloys
MTD 6 Pig Iron and Cast Iron..
MTD 7 Light Metals and Their Alloys..
MTD 8 Copper and Copper Alloys .
MTD 9 Lead, Zinc, Cadmium, Tin, Antimony and Their Alloys..
MTD 10 Precious Metals
MTD 11 Welding General ..
MTD 12 Welding Applications
MTD 13 Ores and Raw Materials.
MTD 14 Foundry.
MTD 15 Refractories..
MTD 16 Alloy Steels and Forgings..
MTD 17 Steel Castings (merged with MTD 14)
MTD 19 Steel Tubes, Pipes and Fittings
MTD 21 Non-Destructive Testing
MTD 22 Metallography and Heat Treatment.
MTD 24 Corrosion Protection and Finishes (merged with MTD 20).
MTD 25 Powder Metallurgical Materials and Products
MTD 26 Industrial Fuel Fired Furnaces .
MTD 27 Special Metals and Alloys (Disbanded) ..
MTD 28 Methods of Chemical Analysis of Non-Ferrous Metals (Disbanded)
MTD 29 Methods of Chemical Analysis of Ores, Minerals and Allied
Materials for Metallurgical Industry (merged with MTD 13)
MTD 30 Sponge Iron and Smelting Reduction
MTD 32 Metal Containers
MTD 33 Nano -Technology Sectional Committee
List of Indian Standards Under Dual Number System (Annex I)
List of Indian Standards Withdrawn/Superseded (Annex II)..
List of Licences Relating to Indian Standards of MTDC (Annex III)..
List of ISO TC where MTD is participating member (P member) is given.
in Annex IV
Indian Standards Published in Hindi/Billingual Indian Standards (Annex V)..
1
6
14
18
22
28
34
38
41
45
48
55
61
66
74
77
81
84
91
95
96
98
101
102
107
116
120
123
3
FOREWORD
This programme of work is prepared by all Standards formulating departments of Bureau of Indian Standards
to indicate the latest position standards and draft standards at different stages of processing. It is prepared
Sectional Committee wise and arranged in the sequential order of the Committee Number.
This document covers the programme of work of Metallurgical Engineering Division Council (MTDC) with its
scope as under:
`Standardization in the field of metallurgy and metallurgical engineering including ferrous and non-
ferrous metals, alloys and their products, ores and minerals, foundry, refractories, powder metallurgy,
heat treatment, corrosion protection, metallic and non-metallic coating (excluding paints, pigments
and enameling) and welding (excluding electrical welding equipment) and Nanomaterials and
technologies
This document covers designation of the Sectional Committee, its Scope, Number and title of the
published/draft standards, date of reaffirmation, number of Amendments issued, new items on programme etc.
An `* before IS No. has been used to indicate that the standard is under revision and `** has been used to
indicate standards to be taken up for revision. Below a published standard wherever `ISO.. standard number
is given, it implies that the Indian Standard given above is under dual number system with the relevant ISO
standard. Further to facilitate tracking on the data base, national number in 9000 series have been used for
new items on programme. This should not be confused with document number.
List of Indian Standard with dual numbers (adopted ISO standards is given in Annex I).
A list of withdrawn/superseded standards relating to this Division is given in Annex II. The list of licences
relating to MTDC standard is given in Annex III. The list of ISO TC where MTD is a participating member (P
member) is given in Annex IV. The list of Indian Standards published in Hindi/Billingual is given in Annex IV.
In adoption, the department has published the following special Publications:
SP Handbook of manual metal-arc welding for welders
SP 1:1967 Comparison of Indian and overseas standards on aluminium alloy castings
SP 6(7):1972 Simple welded girders
SP 12:1975 ISI Handbook for gas welders
SP 14:1976 Index to steel designation
SP 17:1979 Index to IS 1956 Glossary of terms relating to iron and steel
SP 37(Pt 3):1987 Handbook for refractories : Pt 3 Refractories for cement kiln system
It is hoped that this publication will provide the user community a convenient tool for obtaining the latest
information about new and upcoming standards in the field of Metal and Metallurgy.
For any other clarification, please write to:
Head,
Metallurgical Engineering Department,
Bureau of Indian Standards,
9 Bahadur Shah Zafar Marg,
New Delhi 110 002
Email: [email protected]
Fax: 011-23231085
Phone: 011 - 23231085
4
MTD 3 MECHANICAL TESTING OF METALS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of mechanical testing of metals
LIAISON
ISO/TC 164 Mechanical testing of metals
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1403(Part 1):1993 Mechanical testing of metals - Reverse bend test Part 1 Apr 2009
/ ISO 7799:1985 Sheet & strip (second revision)
2 IS 1499:1977 Method for charpy impact test (U-notch) for metals (first Apr 2009 1
revision)
3 IS 1500:2005 Method for Brinell hardness test for metallic materials
/ ISO 6506-1:1999 (third revision)
4 IS 1501:2002 Method for Vickers hardness test for metallic materials Jul 2007
/ ISO 6507-1:1997 (third revision) (Superseding IS 1501(Part 1):1984, IS
1501(Part 2):1984, IS 1501 (Part 3):1987, IS 10927 (Part
1):1984, IS 10927(Part 2):1984 and IS 10927(Part
3):1991
5 IS 1586:2000 Method for Rockwell hardness test for metallic material Jan 2006
(Scales A-B-C-D-E-F-G-H-K) (third revision)
(Superseding IS 3754, IS 3804, IS 5072, IS 5073 and IS
5076)
6 IS 1598:1977 Method for izod impact test of metals (first revision) Apr 2009
7 IS 1599:1985 Method for bend test (second revision) (Superseding IS Jan 2006
| ISO 7438:2005 1692:1974, IS 3260:1960 and IS 4598:1968)
8 IS 1608:2005 Metallic materials - Tensile testing at ambient temperature
/ ISO 6892:1998 (third revision)
9 IS 1716:1985 Method for reverse bend test for metallic wire (second Jan 2006
| ISO 7801:1984 revision) (Superseding IS 6878:1973)
10 IS 1717:1985 Method for simple torsion test for wire (second revision) Jan 2006
| ISO 7800:2003 (Superseding IS 4176:1971 and IS 6253:1971)
11 IS 1754:2002 Method for verification of vickers hardness testing Jul 2007
/ ISO 6507-2:1997 machines (third revision) (Amalgating IS 1754(Part 1 &
2):1986)
12 IS 1755:1983 Method for wrapping test for metallic wire (first revision) Jan 2006
| ISO 7802:1983 (Superseding IS 3398:1965 and IS 4168:1967)
13 IS 1757:1988 Method for charpy impact test (V notch) for metallic Apr 2009 1
material (second revision)
14 * IS 1828(Part 1):2005 Metallic materials - Verifications of static uniaxial testing
/ ISO 7500-1 : 1986 machines Part 1 Tensile testing machines (third revision)
15 IS 1828(Part 2):2002 Metaliic materials -verification of static unuaxial testing Jul 2007
/ ISO 7500-2:1996 machines-Tension creep testing machine verification of
the applied load
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
5
16 IS 2281:2005 Method for verification of Brinell hardness testing
/ ISO 6506-2:1999 machines (third revision)
17 IS 2328:2005 Metallic materials - Tube- Flattening test (second revision)
/ ISO 8492:1998
18 IS 2329:2005 Metallic materials - Tube (in full section) - Bend test
/ ISO 8491:1998 (second revision)
19 IS 2330:1986 Method for flanging test on metallic tubes (first revision) Apr 2009
20 IS 2335:2005 Metallic materials - Tube drift expanding test (second
/ ISO 8493:1998 revision)
21 IS 2854:1990 Determination of young's modulus,tangent modulus and Jan 2006
chord modulus - Test method (first revision)
22 IS 2855:1991 Thermostat metals - Determination of flexivity (first Apr 2009
revision)
23 IS 3394:1985 Method for accelerated life test of electrical resistance Jan 2006
alloys for heating elements (first revision)
24 IS 3407(Part 1):1983 Method for creep testing of steel at elevated temperature Jan 2006
Part I Tensile creep testing (first revision) (Superseding
IS 3408:1965)
25 IS 3407(Part 2):1983 Part 2 Tensile creep stress rupture testing (first revision) Jan 2006
(Superseding IS 3409:1965)
26 IS 3410:1993 Metallic materials - Determination of linear thermal Apr 2009
expansion (first revision)
27 IS 3711:1990 Wrought steel - Selection and preparation of samples Jan 2006
and test pieces for mechanical tests (first revision)
28 IS 3766:1977 Method for calibration of pandulum impact testing Apr 2009 2
machines for testing metals (first revision)
29 IS 3803(Part 1):1989 Steel - Conversion of elongation values Part I Carbon & Jan 2006
/ ISO 2566-1 : 1984 low alloy steels (second revision)
30 IS 3803(Part 2):1989 Part 2 Austenitic steels (second revision) Jan 2006
/ ISO 2566-2 : 1984
31 IS 4132:2005 Method for calibration of standardized blocks to be used
/ ISO 6506-3:1999 for Brinell hardness testing machines (second revision)
32 IS 4133:2002 Method for calibration of standardized blocks to be used Jul 2007
/ ISO 6507-3:1997 for Vickers hardness testing machines (second revision)
33 IS 4169:1988 Method for calibration of force-proving instruments used Apr 2009
for the verification of uniaxial testing machines (first
revision)
34 * IS 4258:1982 Hardness conversion tables for metallic materials (first Apr 2009 1
revision)
35 IS 5069:1982 Glossary of terms relating to methods of mechanical Apr 2009
| ISO 6929 testing of metals (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
6
36 IS 5070:1985 Method for beam unnotched impact test for grey cast Jan 2006
| ISO 946:1975 iron (first revision)
37 IS 5074:1969 Method for axial load fatigue testing of steel Jan 2006
| 1099:1975
38 IS 5075:1985 Method of rotating bar bending fatigue testing of metals Jan 2006
| ISO 1143:1975 (first revision)
39 IS 5242:1979 Method of test for determining shear strength of metals Jan 2006
(first revision)
40 IS 6243:1985 Method of hydrogen embrittlement test for copper (first Jan 2006
| ISO 2626:1973 revision)
41 IS 6885:1973 Method for Knoop hardness testing of metals Jan 2006
42 IS 6886:1973 Method for dynamic force calibration of axial load fatigue Jan 2006
testing machines by means of a strain gauge technique
43 IS 7095:1973 Method for verification of Knoop hardness testing Jan 2006
machines
44 IS 7096:1981 Method for scleroscope hardness testing for metallic Jan 2006
materials (first revision)
45 IS 7097:1973 Method for calibration of standardized blocks for Jan 2006
verification of Knoop hardness testing machines
46 IS 7172:1984 Method for verification of scleroscope hardness testing Jan 2006
machines (first revision)
47 IS 8632:1977 Method for identification of test-piece axes Apr 2009
| ISO 3785:1976
48 IS 10166:1982 Method for calibration of standardized test block for Jan 2006
verification of scleroscope hardness testing equipments
49 IS 10167:1982 Method for upsetting test on metallic materials Jan 2006
50 IS 10175(Part 1):1993 Mechanical testing of metals -Modified erichsen cupping Apr 2009
/ ISO 8490:1986 test - sheet and strip Pt 1 Thickness upto 2 mm (first
revision)
51 IS 10180:1982 Method for plain strain fracture toughness testing of Jan 2006
metals
52 IS 10181:1982 Method for determination of magnetic permeability of iron Jan 2006
and steel
53 IS 10623:1983 Drop weight tear test on ferritic steels and line pipe Jan 2006
54 IS 10636(Part 1):1983 Measurement of abrasive wear properties of metallic Jan 2006
materials Part I Test method for gouging abrasion
resistance (Jaw crusher test)
55 IS 10636(Part 2):1983 Part2 Test method for high stress abrasion Jan 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
7
56 IS 10636(Part 3):1983 Part 3 Test method for low stress abrasion Jan 2006
57 IS 11083:1984 Method for evaluation of friction and wear properties of Jan 2006
materials against steel surface
58 IS 11240:1985 Method for falling weight test on metallic materials Jan 2006
59 IS 11999:2007 Method for determination of plastic strain ratio 'r' for
/ ISO 10113:1991 steel sheets (first revision)
60 IS 12260:1987 Method for ring expanding test on metallic tubes Apr 2009
/ ISO 8495 : 1986
61 IS 12261:1987 Method for reverse torsion test for metallic wire Apr 2009
62 IS 12278:1988 Method for ring tensile test on metallic tubes Apr 2009
63 IS 12514:1988 Method for torsional stress fatigue testing Apr 2009
64 IS 12872:1990 Metallic materials - Verification of extensometers used Jan 2006
| ISO 9513 : 1989 used in uniaxial testing
65 IS 13237:1991 Metallic foils - Tension testing Apr 2009
66 IS 13838:1993 Mechanical testing of metals - Determination of poisson's Jan 2006
Ratios
67 IS 15420:2003 Metallic materials-charpy pendulum impact test - Apr 2009
preparation and characterization of charpy V-reference
test pieces for verification of test machines
68 IS 15756:2007 Metallic materials - Sheet and strip - Determination of
/ 10275:1993 tensile stain hardening exponent
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 3(4685) Metallic materials - Wire - Simple torsion test (third
/ ISO 7800:2003 revision of IS 1717)
2 DOC.MTD 3(4688) Metallic materials - Calibration of extensometers used in
/ ISO 9513:1999 uniaxial testing (first revision of IS 12872)
3 DOC.MTD 3(4689) Metallic materials - Tube - Flanging test (second revision
/ ISO 8494:1998 of IS 2330)
4 DOC.MTD 3(4691) Metallic materials - Tube- Ring tensile test (first revision
/ ISO 8496:1998 of IS 12278)
5 DOC.MTD 3(4891) Metallic Materials -lenoop hardness test Part 1 Test
/ 4545-1:2005 Method (third revision of IS 6885)
6 DOC.MTD 3(4892) Metallic materials - knoop hardness test Part 2:
/ 4545-2:2005 Verification and calibration of testing machines
7 DOC.MTD 3(4893) Metallic materials - knoop hardness test Part 3:
/ 4545-3:2005 Calibration of reference blocks
8 DOC.MTD 3(4894) Metallic Materials - Knoop hardness test Part 4 Table of
/ 4545-4:2005 hardness values
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
8
9 DOC.MTD 3(4895) Metallic materials - Conversion of hardness values
/ ISO 18265:2003 (second revision of IS 4258)
10 DOC.MTD 3(4896) Steel and steel products - Location and preparation of
/ ISO 377:1997 samples and test pieces for mechanical testing (second
revision of IS 3711)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.MTD 3(4684) Metallic materials - Bend test (third revision of IS 1599)
/ ISO 7438:2005
2 DOC.MTD 3(4687) Metallic materials - Sheet and strip - Erichsen cupping
/ ISO 20482:2003 test (second revision of IS 10175)
3 DOC.MTD 3(4897) Metallic Materials - Rockwell hardness test Part 1 Test
/ 6508-1:2005 Method (Scales A, B ,C ,D ,E ,F, G, H, K, N, T (fourth
revision of IS 1586 )
4 DOC.MTD 3(4898) Metallic materils - Rockwell hardness test Part 2
/ 6508-2:2005 Verification and calibration of testing machines ( scales
A, B, C, D, E,, F, H, K, N, T )
5 DOC.MTD 3(4899) Metallic materials - Rockwell hardness test Part 3:
/ 6508-3:2005 Calibration of reference blocks (scales A, B,C, D ,E, F, G,
.H,K,N,T)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
9
MTD 4 WROUGHT STEEL PRODUCTS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of steel and wrought steel products including
chemical/instrumental analysis, classification, designation and coding of steels
LIAISON
ISO/TC 17 Steel
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 SP 14 : 1976 Index to classification of steel Feb 2008
2 SP 17 : 1979 Index to glossary of terms relating to iron and steel Feb 2008
3 IS 228(Part 1):1987 Methods of chemical analysis of steels (part 1) Feb 2008 1
Determination of carbon by volumetric method (for
carbon 0.05 to 2.50 percent) (third revision)
4 IS 228(Part 2):1987 Part 2 Determination of Manganese in plain carbon and Feb 2008
low alloy steels by arsenite method (third revision)
5 IS 228(Part 3):1987 Part 3 Determination of phosphorus by alkalimetric Feb 2008
method (third revision)
6 IS 228(Part 4):1987 Part 4 Determination of total carbon by gravimetric Feb 2008
method (for carbon greaterthan or equal to 0.1 percent)
(third revision)
7 IS 228(Part 8):1989 Part 8 Determination of silicon by gravimetric method (for Nov 2009
silicon 0.05 to 0.50percent) (third revision)
8 IS 228(Part 9):1989 Part 9 Determination of sulphur in plain carbon steels by Nov 2009
evolution method (forsulphur 0.01 to 0.25 percent) (third
revision)
9 IS 228(Part 14):1988 Part 14 Determination of carbon by thermal conductivity Nov 2009
method (for ca rbon 0.005 to 2.000 percent)
10 IS 228(Part 17):1998 Part 17 Determination of nitrogen by thermal conductivity Nov 2005
method (for nitrogen upto 0.4 percent)
11 IS 228(Part 19):1998 Part 19 Determination of nitrogen by steam distillation Nov 2005
12 IS 228(Part 20):2003 Methods of chemical analysis of steels Part 20 Dec 2008
Determination of carbon and sulphur by infra-red
absorption method
13 IS 228(Part 21):2003 Methods of chemical analysis of steel Part 21 Dec 2008
Determination of copper by spectrometric method (for
copper 0.02 to 0.5 percent) (Revision of IS 228)
14 IS 228(Part 22):2003 Methods of chemical analysis of steels Part 22 Dec 2008
Determination of total hydrogen in steel by thermal
conductivity method
15 IS 228(Part 23):2003 Methods of chemical analysis of steel Part 23 Dec 2008
Determination of nitrogen in steel by optical emission
spectrometer
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
10
16 IS 228(Part 24):2003 Methods of chemical analysis of steel Part 24 Dec 2008
Determination of nitrogen steel blby inert gas fusion-
thermal conductivity method
17 IS 277:2003 Galvanized steel sheet (plain and corrugated )(sixth Dec 2008 3
revision)
18 IS 279:1981 Galvanized steel wire for telegraph and telephone Nov 2009 2
purposes (third revision)
19 IS 280:2006 Mild steel wire for general engineering purposes (fourth
revision)
20 IS 412:1975 Expanded metal steel sheets for general purposes Jan 2007 1
(second revision)
21 IS 513:2008 Cold-rolled low carbon steel sheets and strips (fifth
revision)
22 IS 648:2006 Cold rolled non-oriented electrical steel sheet and strip - 2
| IEC 60404-8-4:1998 Fully processed type - Specification (fifth revision)
23 IS 649:1997 Methods for testing steel sheets for magnetic circuits of Jan 2007 1
power electrical apparatus (second revision)
24 IS 1029:1970 Hot-rolled steel strip (baling) (first revision) Feb 2008 2
25 IS 1079:2009 Hot-rolled carbon steel sheet and strip (sixth revision)
26 IS 1136:2008 Preferred sizes for wrought metal products (second
revision)
27 * IS 1148:1982 Hot-rolled rivet bars (upto 40 mm dia) for structural Nov 2009 1
purposes (third revision)
28 IS 1149:1982 High tensile steel rivet bars for structural purposes (third Nov 2009
revision)
29 IS 1387:1993 General requirments for the supply of metallurgical Feb 2008
materials (second revision)
30 IS 1673:1984 Mild steel wire cold heading quality (second revision) Nov 2005
31 * IS 1762(Part 1):1974 Code for designation of steels, Part I Based on lettter Feb 2008
symbols (first revision)
32 IS 1812:1982 Carbon steel wire for the manufacture of wood screws Jan 2007
(second revision)
33 IS 1835:1976 Round steel wire for ropes (third revision) Jan 2007 2
34 IS 1956(Part 2):1976 Glossary of terms relating to iron and steel Part 2 Steel Feb 2008
making (first revision)
35 IS 1956(Part 3):1975 Hot rolled steel products (excluding sheet and strip) Feb 2008 3
36 IS 1956(Part 4):1975 Steel sheet and strip Feb 2008 4
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
11
37 IS 1956(Part 5):1976 Bright steel bar and steel wire Feb 2008 3
38 IS 1990:2009 Steel rivet and stay bars for boilers (second revision)
39 IS 1993:2006 Cold reduced electrolytic tin plate (fourth revision)
/ ISO 11949:1995
40 IS 2002:2009 Steel plates for pressure vessels for intermediate & high
temperature service including boilers (third revision)
41 IS 2041:2009 Steel plates for pressure vessels used at moderate and
low temperature (third revision)
42 IS 2049:1978 Colour code for the identification of wrought steels for Feb 2008 1
general engineering purposes (first revision)
43 IS 2062:2006 Hot rolled low, medium and high tensile structural steel 1
(sixth revision)
44 IS 2100:1970 Steel billets, bars and sections for boilers (first revision) Jan 2007
45 IS 2255:1977 Mild steel wire rod for the manufacture of machine Jan 2007 1
screws (by cold heading process)(second revision)
46 IS 2385:1977 Hot-rolled mild steel sheet and strip in coil form for cold- Jan 2007 1
reduced tinplate and cold-reduced blackplate (first
revision )
47 IS 2507:1975 Cold-rolled steel strips for springs (first revision) Nov 2005 2
48 IS 2549:1994 Code of classification of processed ferrous scrap (first Feb 2008 2
revision)
49 IS 2589:1975 Hard drawn steel wire for upholstery springs (first Jan 2007 1
revision)
50 IS 2591:1982 Dimensions for hot rolled bars for threaded components Jan 2007
(second revision)
51 IS 2830:1992 Carbon steel cast billet ingots,billets,blooms and slabs for Feb 2008 3
re-rolling into steel for general structural purposes
(second revision) (Superseding IS 6914:1978)
52 IS 2831:2000 Carbon steel cast billet ingots, billets, blooms and slabs Nov 2005 2
for re-rolling into low tensile structural steel (third
revision) (Superseding IS 6915:1978)
53 IS 2879:1998 Mild steel for metal arc welding electrodes (fourth Feb 2008 2
revision)
54 IS 3024:2006 Grain orinted electrical steel sheet and strip (second 1
| IEC 60404-8-7:1998 revision)
55 IS 3039:1988 Structural steel for construction of hulls of ships(second Jan 2007
revision)
56 IS 3195:1992 Steel for the manufacture of volute and helical springs Jan 2007 2
(for railway rolling stock) (third revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
12
57 IS 3298:1981 Mild steel rivet bars for shipbuilding (first revision) Jan 2007
58 IS 3431:1982 Steel for the manufacture of volute, helical and laminated Jan 2007 2
springs for automotive suspension (second revision)
59 IS 3502:1994 Steel chequered plates (second revision) Feb 2008 3
60 IS 3885(Part 1):1992 Steel for the manufacture of laminated springs (railway Jan 2007 1
rolling stock) Part 1 Flat Sections (second revision)
61 IS 3885(Part 2):1992 Steel for manufacture of laminated springs (railway Jan 2007 1
rolling stock) Part 2 Rib and groove sections (second
revision)
62 IS 3975:1999 Low carbon galvanized steel wires, formed wires and Nov 2009
tapes for armouring of cables (fourth revision)
63 IS 4072:1975 Steel for spring washers (first revision) Jan 2007 2
64 IS 4223:1975 Steel wire for umbrella ribs (first revision) Jan 2007
65 IS 4224:1972 Steel wire for office staples, pins and clips (first revision) Jan 2007 1
66 IS 4454(Part 1):2001 Steel wires for mechanical springs, Part 1 Cold drawn Nov 2005 1
| ISO 8458-1&2:1998 steel unalloyed steel wire (third revision)
67 IS 4454(Part 2):2001 Part 2 Oil hardened and tempered steel wire (second Nov 2005
| ISO 8458-3:1998 revision) (Superseding IS 4454(Pt 3):1975)
68 IS 4454(Part 4):2001 Part 4 Stainless steel wire (second revision) Nov 2005 1
| ISO 6931-1:1989
69 IS 4824:2006 Bead wire for tyres (second revision) Jan 2007
70 IS 5478:1969 Thermostat metal sheet and strip Feb 2008
71 IS 5872:1990 Cold rolled steel strips (box strappings) (second revision) Nov 2005
72 IS 5986:2002 Hot rolled steel flat products for structural forming and Dec 2008
flanging purposes (second revision)
73 IS 6226(Part 1):1994 Recommendations for apparatus for chemicals analysis Nov 2009
of metals,Part 1 Apparatusfor determination of carbon by
direct combustion (first revision)
74 IS 6226(Part 2):1987 Part 2 Determination on of sulphur by direct combustion Feb 2008
75 IS 6240:2008 Hot rolled steel plate (up to 6mm ) sheet and strip for the
manufacture of low pressure liquifiable gas cylinder and
liquefied petroleum gas (LPG) containers for automotive
use (fourth revision)
76 IS 6902:1973 Steel wire for spokes Jan 2007 2
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
4
13
77 IS 6967:1973 Steel for electrically welded round link chains Jan 2007
78 IS 7072:1973 Glossary of terms relating to emission spectroscopy Jan 2007
79 IS 7226:1974 Cold rolled medium, high carbon and low alloy steel strip Jan 2007
for general engineering purposes
80 IS 7283:1992 Hot rolled bars for production of bright bars and Jan 2007
machined parts for enginner ing applications (first
revision)
81 IS 7452:2002 Hot-rolled structural steel plates - Tolerances on
/ ISO 7452:2002 dimensions and shape
82 IS 7557:1982 Steel wire (upto 20 mm) for the manufacture of cold Jan 2007
forged rivets (first revision)
83 IS 7598:1990 Classification of steels (first revision) Feb 2008
| ISO 4948(Pt 1 & 2)
84 IS 7887:1992 Mild steel wire rods for general engineering purposes Jan 2007 1
(first revision)
85 IS 7904:1995 High carbon steel wire rods (first revision) Jan 2007
86 IS 8052:2006 Steel ingots,billets and blooms for the production of
spings, rivets and screws for general engineering
applications - Specification (second revision)
87 IS 8510(Part 1-3):1977 Tinned steel wire for banding of armatures and rotors Jan 2007
88 IS 8563:1977 Half round mild steel wire for the manufacture of split pins Jan 2007
89 IS 8564:1977 Steel wire for nipples for spokes Jan 2007
90 IS 8565:1977 Heald wire Jan 2007
91 IS 8566:1977 Steel wire for reeds Jan 2007
92 IS 8910:1978 General technical delivery requirements for steel and Nov 2005
| ISO 404:1992 steel products
93 IS 8917:1978 Steel plates for galvanizing pots Jan 2007
94 IS 8951:2001 Steel cast-billet ingots ,billets and blooms for production Nov 2005
of high carbon steel wire rods -Specification (first
revision)
95 IS 8952:1995 Steel ingots,blooms and billets for production of mild steelNov 2005
wire rods for general engineering purposes (first
revision)
96 IS 9442:1980 Hot rolled steel plates, sheets and strips for manufacture Jan 2007
of agricultural tillage discs
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
5
14
97 IS 9476:1980 Cold rolled steel strips for carbon steel razor blades Jan 2007
98 IS 9485:1980 Cold-reduced and hot-rolled carbon steel sheet for Jan 2007
porcelain enamelling
99 IS 9550:2001 Bright steel bars (first revision) Nov 2005
100 IS 9962:1981 Steel wires for needles Jan 2007 1
101 IS 10206:1982 Methods of sampling steel wires Feb 2008
102 IS 10340:1982 Glossary of terms for cold-reduced tinplate and cold- Feb 2008 1
reduced blackplate
103 IS 10748:2004 Hot-rolled steel strip for welded tubes and pipes (second Nov 2009
revision)
104 IS 10794:1984 Mild steel wire for cottor pins Jan 2007
105 IS 11513:1985 Hot-rolled carbon steel strip for cold rolling purpose Nov 2005 3
106 IS 11587:1986 Structural weather resistant steels Jan 2007
| ISO 4952:2003
107 IS 11951:1995 Cold reduced blackplate in coil form for the prod of
/ 11951:1995 tinplate or electroytic chromium/chromium oxide- coated
steel
108 IS 12262:1988 Trapezoidal steel wires for spring washers Jan 2007
109 IS 12313:1988 Hot dip terene coated carbon steel sheet Jan 2007 1
| ISO 4999:2005
110 IS 12367:1988 Cold-rolled carbon steel strips/coils for manufacture of Jan 2007
welded tubes
111 IS 12457:1988 Code of practice for evaluation repairs and acceptance Jan 2007
| ISO 7788:1985 limits of surface defects in steel plates, and wide flats
112 IS 12591:2006 Cold-reduced electrolytic chromium/chromium oxide Jan 2007
/ ISO 11950:1995 coated steel (first revision)
113 IS 13566:1992 Recommended practice of pickling by H2SO4 levelling Jan 2007
and oiling of LPG sheets
114 IS 13752:1993 Guidelines for reporting sequence of elements in steel & Feb 2008
pig iron and mechanical properties in steel
115 IS 14246:1995 Continuously pre-painted galvanised steel sheets and Nov 2005
coils
116 IS 14491:1997 Low carbon high strength cold rolled steel sheets and Jan 2007
| ISO 13887:2004 coils for cold forming
117 IS 14650:1999 Carbon steel cast billet ingots, billets, blooms and slabs Nov 2009 1
for re rolling purposes
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
15
118 IS 15103:2002 Fire resistant steel Feb 2008
119 IS 15391:2003 Cold rolled non-oriented electrical steel and strip Feb 2008 2
| IEC 60404-8-2&3:1998 delivered in semi processed state
120 IS 15647:2006 Hot rolled steel narrow width strip for welded tubes &
pipes
121 IS 16160:2005 Continuously hot rolled steel sheet products -
/ ISO 16160:2005 Dimensional and shape tolerances
122 IS 16162:2005 Continuously cold-rolled steel sheet products -
/ ISO 16162:2005 Dimensional and shape tolerances
123 IS 16163:2005 Continuously hot dipped coated steel steel products
/ ISO 16163:2005 dimensional & shape tolerances
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 4(4839) Third revision of IS 3502
2 DOC.MTD 4(4773) Steel wire rod - dimensions and tolerances
/ ISO 16124:2004
3 DOC.MTD 4(4851) Steel rivet bars (medium and high tensile) for structural
purposes (fourth revision of IS 1148)
4 DOC.MTD 4(4854) Compendium of method of chemical analysis of steels
5 DOC.MTD 4(4855) Hot-dip 55% alumnium zinc alloy metallic coated steel
sheet & strip (plain)
6 DOC.MTD 4(4856) Pre-painted 55% aluminium zinc alloy metallic coated
steel strip & sheet (plain)
7 DOC.MTD 4(4885) Structural steel (ordinary quality)
8 DOC.MTD 4(4888) General technical delivery requirements for steel and
/ ISO 404:1992 steel products (first revision of IS 8910)
9 DOC.MTD 4(4889) Steel & Steel products - Inspection Documents
/ ISO 10474:1991
10 DOC.MTD 4(4890) Steel & iron sampling and preparation of samples for the
/ ISO 14284:1996 determination of chemical composition
11 DOC.MTD 4(4906) Draft amendment No, 1 to IS 280:2006
12 DOC.MTD 4(4923) Structural steels for buildings and structures with
improved seismic resistance
DRAFT STANDARD COMPLETED WIDE CIRCULATION
1 DOC.MTD 4(4852) Designation system for steels - steel names based on
letter symbols [second revision of IS 1762 (Pt 1)]
* INDICATES STANDRDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
16
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.MTD 4(4939) Third revision of IS 5986
2 DOC.MTD 4(4937) Draft Amendment No. 2 to IS 2879:1998 Mild steel for
meal arc welding electrodes (third revision)
3 DOC.MTD 4(4850) Method for chemical analysis of steels, Part 20
Determination of carbon and sulphur by infra-steel
absorption method (for carbon 0.005 to 2.1% and
sulphur 0.0005 to 0.35%) (third revision of IS 228(Part 20)
4 DOC.MTD 4(4859) Coated steel sheets for automotive applications
5 DOC.MTD 4(4938) First Revision of IS 11513
6 DOC.MTD 4(4940) Draft Amendment No. 1 to IS 15103:2002
7 DOC.MTD 4(5003) Cold reduced tinplate and cold reduced blackplate
Ordinary quality
8 DOC.MTD 4(5004) High tensile strength plat rolled steel plate (upto 6 mm),
steel and strip for the manufacture of welded gas
cylinder
9 DOC.MTD 4(5005) Hot rolled medium & high tensile structural steel (seventh
revision of IS 2062)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
17
MTD 5 FERRO ALLOYS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of ferro alloys and other metallic additions used for
iron steel making including their chemical/instrumental analysis
LIAISON
ISO/TC 132 Ferroalloys
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1110:1990 Ferrosilicon (fourth revision) Mar 2009 1
2 IS 1170:1992 Ferrochromium (second revision) Mar 2009 1
3 IS 1171:1996 Ferromanganese (fourth revision) Mar 2009
4 IS 1466:1985 Ferrovanadium (third revision) Mar 2009
5 IS 1467:1993 Ferrotungsten ( third revision) Mar 2009
6 IS 1468:2000 Ferro titanium ( fourth revision) Mar 2009
7 IS 1469:1993 Ferromolybdenum ( fourth revision ) Mar 2009
8 IS 1470:1990 Silicomanganese (Third revision) Mar 2009 1
9 IS 1471:1988 Ferrophosphorous (second revision) Mar 2009
10 IS 1559:2003 Chemical analysis of Ferrosilicon-Magnesium Alloy - Part
1 Determination of silicon gravimetric method (Revision of
IS 1559)
11 * IS 1559:1961 Methods of chemical analysis of ferro alloys Sep 2007
12 IS 1559(Part 1):1988 Methods of chemical analysis of ferro silicon Part 1 Mar 2009
Determination of silicon (second revision)
13 IS 1559(Part 2):1982 Part 2 Determination of carbon (first revision) Sep 2007
14 IS 1559(Part 3):1982 Part 3 Determination of sulphur (first revision) Sep 2007
15 IS 1559(Part 4):1982 part 4 Determination of phosphorus (first revision) Sep 2007
16 IS 1559(Part 5):2003 Chemical anlaysis of ferrosilicon, Part 5 Determination of Mar 2009
aluminium in ferrosilicon (Aluminium 0.05 to 1.75%)
(second revision of IS 1559)
17 IS 1559(Part 6):1982 Part 6 Determination of calcium (first revision) Sep 2007
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
18
18 IS 1559(Part 7):1982 Part 7 Determination of manganese (first revision) Sep 2007
19 IS 2017:1967 Methods of Chemical analysis of metallic manganese Sep 2007
20 * IS 2018:1998 Methods of chemical analysis of calcium silicon (second Sep 2007
revision)
21 IS 2020(Part 1):1968 Methods of chemical analysis of silico chromium Part 1 Sep 2007
analysis of silicon and chromium
22 IS 2021:1993 Metallic manganese(second revision) Mar 2009
23 IS 2022:1997 Calcium silicon (third revision) Mar 2009
24 IS 2023:1993 Metallic chromium (second revision) Mar 2009
25 IS 2024:1988 Ferrosilicochromium (third revision) Mar 2009
26 IS 2085:1962 Code for designation of ferro alloys Sep 2007
27 IS 2277:1964 Methods of chemical analysis of metallic silicon Sep 2007
28 IS 2301:2000 Metallic silicon (second revision) Mar 2009
29 IS 2391:1970 Foundry nickel (first revision) Mar 2009
30 IS 2782:1964 Primary nickel Sep 2005 1
31 * IS 3011:1973 Ferrosilicozirconium (first revision) Sep 2005
32 IS 3012:1985 Chromemanganese ( first revision ) Sep 2005
33 IS 3013:1991 Ferroboron ( Third revision) Sep 2005
34 IS 3014:1993 Ferroniobium (Ferrocolumbium) (second revision) Mar 2009
35 IS 3295(Part 1):1969 Method of chemical analysis of ferroboron Part 1 Mar 2009
Analysis of carbon, silicon and aluminium
36 IS 3295(Part 2):1970 Part 2 Determination of boron Mar 2009 1
37 IS 4182:1988 Misch metal (first revision) Mar 2009
38 IS 4409:1973 Ferronickel (first revision) Sep 2005 1
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
19
39 IS 5632:1970 Wolframite concentrate Sep 2005
40 IS 5633:1973 Vanadium pentoxide (first revision) Sep 2005
41 IS 5634:1987 Molybdenum oxide (technical)(first revision) Sep 2005
42 IS 7148:1980 Ferro alloys for welding industry Sep 2005 1
43 IS 7965:1976 Niobium (Columbium) Sep 2005
44 IS 11945:1987 Charge chrome Sep 2005
45 IS 12614(Part 1):1988 Method of chemical analysis of ferro molybdenum Mar 2009
Part 1 Determination of molybdenum
46 IS 12614(Part 2):1988 Part 2 Determination of total carbon Mar 2009
47 IS 12614(Part 3):1988 Part 3 Determination of siliconON Mar 2009
48 IS 12614(Part 4):1988 Part 4 Determination of sulphur Mar 2009
49 IS 12614(Part 5):1988 Part 5 Determination of phosphorus Mar 2009
50 IS 12614(Part 6):1988 Part 6 Determination of copper Mar 2009
51 IS 12614(Part 7):1988 Part 7 Determination of aluminium Mar 2009
52 IS 12908:1990 Ferroaluminium Mar 2009
53 IS 13164:1991 Ferrosilicomagnesium Sep 2005
54 * IS 13452(Part 1):1992 Methods of chemical analysis of ferrochromium Sep 2007
Part 1 Determination of silicon in high carbon
ferrochromium by gravimetiric method
55 * IS 13452(Part 2):1992 Part 2 Determination of silicon in low carbon Sep 2007
ferrochromium by gravimetric method
56 * IS 13452(Part 3):1992 Part 3 Determination of phosphorus in low carbon Sep 2007
ferrochromium by spectrometricmethod
57 * IS 13452(Part 4):1992 Part 4 Determination of total sulphur in low carbon and Sep 2007
high carbon ferrochromium by direct combustion method
58 * IS 13452(Part 5):1992 Part 5 Determination of chromium in high carbon Mar 2009
ferrochromium chargechrome by dichromate titration
(first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
20
59 * IS 13452(Part 6):1997 Part 6 Determination of chromium in low carbon ferro Sep 2007
chromium
60 * IS 13452(Part 7):2003 Chemical analysis of ferrochromium Part 7 Determination Mar 2009
of phosphorus in ferrochromium/chargechrome by
alkalimetric method
61 * IS 13840(Part 1):1993 Chemical analysis of ferro titanium Part 1 Determination Mar 2009
of carbon by direct combustion gravimetric method
62 * IS 13840(Part 2):1993 Part 2 Determination of silicon by gravimetric method Mar 2009
63 * IS 13840(Part 3):1993 Part 3 Determination of titanium by cupferron Mar 2009
(gravimetric) method
64 * IS 13840(Part 4):1998 Part 4 Determination of aluminium by phosphate method Mar 2009
65 * IS 13840(Part 5):1998 Part 5 Determinations of sulphur by direct combusion Mar 2009
method
66 * IS 13840(Part 6):1998 Part 6 Determination of titanium by x-ray fluorescence Mar 2009
technique
67 IS 13938(Part 1):1994 Chemical analysis of ferromanganese Part 1 Mar 2009
Determination of silicon by gravimetric method
68 IS 13938(Part 3):1993 Chemical analysis of ferromanganese Part 3 Mar 2009
Determination of phosphorous by volumetric (alkalimetric)
method
69 IS 13938(Part 4):1994 Chemical Analysis of Ferromangnese, Part-4 Mar 2009
Determination of Total Sulpher by direct Combustion
Method
70 IS 14529:2004 Chemical analysis of ferro silicon magnesium alloy (first
revision)
71 IS 15396:2003 Chemical analysis of ferro silicon zirconium alloy
72 IS 15765:2008 Method of sampling ferro alloys for sieve analysis and
size determination
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.MTD 5(4802) Ferromanganese - Specification (fifth revision of IS 1170)
2 DOC.MTD 5(4803) Silimanganese - Specification (fourth revision of IS 1470)
PRODUCT 28
METHODS OF TEST 18
CODE OF PRACTICES 8
OTHERS 18
TOTAL : 72
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
21
MTD 6 PIG IRON AND CAST IRON SECTIONAL COMMITTEE
SCOPE - Standardization in the field of pig iron, various types of cast iron and castings
LIAISON
ISO/TC 5 Ferrous metal pipes and metallic fittings
ISO/TC 25 Cast iron and pig iron
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 210:2009 Grey iron castings (fifth revision)
(Superseding IS 6331:1967)
2 IS 1536:2001 Centrifugally cast (spun) iron pressure pipes for water, Jul 2006 3
gas and sewage (fourth revision)
3 IS 1537:1976 Vertically cast iron pressure pipes for water, gas and May 2005 5
sewage (first revision)
4 IS 1538:1993 Cast iron fittings for pressure pipes for water, gas and Nov 2009 3
sewage (third revision)
5 IS 1729:2002 Cast iron/ductile iron drainage pipes and pipe fittings for Nov 2007 2
ground non-pressure pipe line socket and spigot series
(second revision)
6 IS 1865:1991 Iron castings with spheroidal or nodular graphite (third May 2005
revision)
7 IS 1879:1987 Malleable cast iron pipe fittings (second revision) May 2005 8
8 IS 1956(Part 7):1976 Glossary of terms relating to Iron & Steel- Part 7 Wrought Aug 2008 2
iron
9 IS 2084:1991 Code for designation of pig iron (second revision) Jul 2006
10 IS 2749:1974 Austenitic iron castings (first revision) May 2005
11 IS 3005(Part 1):1979 Grey cast iron ingot moulds, stools and slag ladles Part 1Nov 2007
Bottom stools for large size ingot mould weighing 8
tonnes and higher (first revision)
12 IS 3005(Part 2):1979 Part 2 Grey cast iron ingot moulds of mass more than 8 May 2005
tonnes (first revision)
13 IS 3005(Part 3):1982 Part 3 Grey cast iron ingot moulds of mass more than May 2005
one tonne and up to 8 tonnes (first revision)
14 IS 3005(Part 4):1984 Part 4 Grey cast iron ingot moulds of mass up to 1 tonne May 2005
(first revision)
15 IS 3355:1974 Grey iron castings for elevated temperatures for non- May 2005
pressure containing parts (first revision)
16 IS 3516:1966 Cast iron pipe flanges and flanged fittings for petroleum May 2005 1
industry
17 IS 3896:1961 Comparison of Indian and overseas standards for iron May 2005
castings
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
22
18 IS 3896(Part 1):1978 Comparison of Indian and overseas standards for iron May 2005
castings Part 1 Grey iron castings (first revision)
19 IS 3896(Part 2):1985 Comparison of Indian and overseas standards for iron May 2005
castings (first revision) Part 2 Spheroidal Graphite Iron
Castings
20 IS 3989:2009 Centrifugally cast (spun) iron spigot and socket
soil,waste ventilating and rain water pipes, fittings, and
accessories (third revision)
21 IS 4771:1985 Abrasion-resistant iron castings (second revision) May 2005
22 IS 5519:1979 Deviations for untoleranced dimensions and mass of May 2005
grey iron castings (first revision)
23 IS 5531:1988 Cast iron specials for asbestos-cement pressure pipes Nov 2007
for water, gas and sewage (second revision)
24 IS 5787:1986 Spheroidal or nodular graphite iron castings for paper mill Jul 2006 1
dryer rolls (first revision)
25 IS 5788:1986 Iron castings with spheroidal or nodular graphite for May 2005 1
pressure containing partsfor use at elevated
temperatures (first revision)
26 IS 5789:1993 Austenitic spheroidal graphite iron casting for pressure Nov 2009
containing parts suitable for low-temperature service
(first revision)
27 IS 6163:1978 Centrifugaly cast (spun) iron low pressure pipes for May 2005
water, gas and sewage (first revision)
28 IS 6331:1987 Automotive grey iron castings (first revision) May 2005 1
(Superseded by IS 210:2009)
29 IS 6418:1971 Cast iron and malleable cast iron flanges for general May 2005
engineering purposes
30 IS 6629:1972 Cast iron rolls May 2005
31 IS 7181:1986 Horizontally cast iron double flanged pipes for water, May 2005 2
gas and sewage (first revision)
32 IS 7520:1974 Corrosion resistant high silicon iron castings May 2005
33 IS 7925:1976 Low alloy types of abrasion resistant iron castings Nov 2009
34 * IS 8329:2000 Centrifuglly cast (spun) ductile iron pressure pipes for May 2005 1
water, gas and sewage (third revision)
35 IS 8349:1977 Deviations for untoleranced dimensions of malleable iron May 2005
castings
36 IS 8350:1977 Deviations for untoleranced dimensions of spheroidal or May 2005 1
nodular graphite iron castings
37 IS 8794:1988 Cast iron detachable joints for use with asbestos cement Nov 2007 2
pressure pipes (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
23
38 IS 9321:1979 Material for alloy cast iron valve seat inserts May 2005
39 * IS 9523:2000 Ductile iron fittings for pressure pipes for water,gas and May 2005
sewage (first revision)
40 IS 9630:1980 Recommended practice for production of spheriodal Nov 2009 1
graphite
41 IS 10207:1982 Methods of sampling grey iron and malleable iron castingsMay 2005
42 IS 10292:1988 Dimensional requirements for rubber sealing rings for Nov 2007
C.I.D. joints in asbestoscement piping (first revision)
43 IS 10299:1982 Cast iron saddle pieces for service connection from May 2005
asbestos cement pressure pipes
44 IS 11606:1986 Methods of sampling cast iron pipes & fittings May 2005
45 IS 12308(Part 1):1987 Method for chemical analysis of cast iron and pig iron Nov 2007
Part 1 Determination of total carbon by thermal
conductivity method (for carbon1.00 to 4.50 percent)
46 IS 12308(Part 2):1987 Part 2 Determination of sulphur by iodimetric titration afterNov 2007
combustion (for sulphur 0.005 to 0.25 percent)
47 IS 12308(Part 3):1987 Part 3 Determination of manganese by periodic Nov 2007
spectrophotometric method (for manganese 0.1 to 2.5
percent)
48 IS 12308(Part 4):1988 Part 4 Determination of total carbon, graphitic carbon and Nov 2009
combined carbon by gravimetric method
49 IS 12308(Part 5):1991 Part 5 Determination of phosphorus by alkalimetric Jul 2006
method (for phosphorus 0.01 to 0.50 percent)
50 IS 12308(Part 6):1991 Part 6 Determination of silicon by gravimetric method (for Jul 2006
silicon 0.1 to 6.0 percent)
51 IS 12308(Part 8):1997 Part 8 Determination of chromium by per sulphate Nov 2007
oxidation method (for chromium0.1 to 28 percent)
52 IS 12308(Part 9):1993 Part 9 Determination of molybdenum by thiocynate Nov 2009
(spectrometric) method (for molybdenum 0.01 to 1.0
percent)
53 IS 12308(Part 10):1991 Part 10 determination of managanese (upto 7.0 percent) Jul 2006
by arsenite(volumetric )method
54 IS 12308(Part 11):1991 Part 11 Determination of total carbon by the direct Jul 2006
combustion volumetric method (for carbon 1.50 to 4.50
percent)
55 IS 12308(Part 12):1992 Part 12 Determination of copper by atomic absorption Nov 2007
spectrometric method (for copper 0.01 to 0.5 percent)
56 IS 12308(Part 13):1992 Part 13 Determination of magnesium by atomic absorptin Nov 2007
spectrometric method (for magnesium upto 0.1 percent)
57 IS 12308(Part 14):1993 Part 14 Determination of titanium by hydrogen per oxide Nov 2009
(spectrophotometric) method (for titanium upto 0.25
percent)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
24
58 IS 12820:2004 Dimensional requirements of rubber gaskets for Nov 2009
mechanical joints and push-on joits for use with cast iron
pipes and fittings for carrying water, gas and sewage
(first revision)
59 IS 12987:1991 Cast iron detachable joints for use with asbestos cement May 2005
pressure pipes (light duty)
60 IS 12988:1991 Dimensional requirements for rulbber sealing rings for May 2005
CID joints in asbestos cement piping for light duty AC pipes
61 IS 13382:2004 Cast iron specials for mechanical and push-on flexible Nov 2009
joints for pressure pipelines for water, gas and sewage
- Specification (first revision)
62 IS 13502:1992 Pig iron May 2005
63 IS 14329:1995 Malleable iron castings May 2005
64 IS 15338:2003 Spectrometric analysis of cast iron by direct reducing Aug 2008
optical emission vacuum spectrometer - Point to plane
technique
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 6(4800) Habless cerntifugally cast (spun) iron pipes, fittings and
accessories - spigot series
2 DOC.MTD 6(4832) Malleable cast iron pipe fittings - Specification (third
revision of IS 1879)
PRODUCT 29
METHODS OF TEST 6
CODE OF PRACTICES 1
TERMINOLOGY 1
OTHERS 27
TOTAL : 64
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
25
MTD 7 LIGHT METALS AND THEIR ALLOYS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of aluminium, magnesium, titanium and and their
alloys and products (other than structural sections) including their chemical
instrumental analysis
LIAISON
ISO/TC 79 Light metals and their alloys
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 SP 1 : 1967 Comparision of Indian and overseas standards on Dec 2007
aluminium alloy castings
2 IS 21:1992 Wrought aluminium and aluminium alloys for manufacture Oct 2006 1
of utensils (fourth revision)
3 IS 23:1980 Primary aluminium ingots for remelting for aircraft Oct 2006
purposes (third revision)
4 IS 202:1981 Aluminium casting alloy ingots and casting for aircraft Oct 2006 1
purposes (third revision)
5 IS 504:1963 Methods of chemical analysis of aluminium and its alloys Mar 2010
(revised)
6 IS 504(Part 1):2002 Methods of Chemical analysis of aluminium and its alloys Dec 2007
Part 1 Determination of silicon (first revision)
7 IS 504(Part 2):2000 Part 2 Determination of iron (first revision) Dec 2007
8 IS 504(Part 3):2003 Part 3 Determination of copper (first revision) Dec 2007
9 IS 504(Part 4):2002 Part 4 Determination of zinc (first revision) Dec 2007
10 IS 504(Part 5):2002 Part 5 Determination of manganese (first revision) Dec 2007
11 IS 504(Part 6):2002 Part 6 Determination of magnesium (first revision) Dec 2007
12 IS 504(Part 7):2002 Methods of chemical analysis of aluminium and its alloys Dec 2007
Part 7 Determination of nickel (first revision)
13 IS 504(Part 8):2002 Part 8 Determination of chromium (first revision) Dec 2007
14 IS 504(Part 9):2002 Part 9 Determination of tin (first revision) Dec 2007
15 IS 504(Part 10):2002 Part 10 Determination of antimony (first revision) Dec 2007
16 IS 504(Part 11):2002 Part 11 Determination of titanium (first revision) Dec 2007
17 IS 504(Part 12):2002 Part 12 Determination of vanadium (first revision) Dec 2007
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
26
18 IS 504(Part 13):2003 Part 13 Determination of Sodium Dec 2007
19 IS 504(Part 14):2003 Part 14 Determination of Berrileum Dec 2007
20 IS 504(Part 15):2003 Part 15 Determination of Zirconium Dec 2007
21 IS 504(Part 16):2003 Part 16 Determination of Lithium Dec 2007
22 IS 617:1994 Aluminium and aluminium alloy ingots and castings for Mar 2010 1
general engineering purposes (third revision)
(Superseded IS 20:1977)
23 IS 733:1983 Wrought aluminium and aluminium alloy bars, rods and Oct 2006 1
sections for general engineering purposes (third revision)
24 IS 734:1975 Wrought aluminium and aluminium alloys,forging stock Oct 2006
and forgings for general engineering purposes (second
revision)
25 IS 736:1986 Wrought aluminium and aluminium alloy plate for general Oct 2006
engineering purposes (third revision)
26 IS 737:2008 Wrought aluminium and aluminium alloy sheet and strip
for general engineering purposes (fourth revision)
27 IS 738:1994 Wrought aluminium alloys, drawn tube for general Mar 2010
engineering purposes (third revision)
28 IS 739:1992 Wrought aluminium and aluminium alloy wire for general Oct 2006
engineering purposes (third revision)
29 IS 740:1977 Wrought aluminium and aluminium alloy rivet stock for Oct 2006
general engineering purposes (second revision)
30 IS 1253:1992 Aluminium for use in iron and steel manufacture (third Oct 2006
revision)
31 IS 1254:2007 Corrugated aluminium sheet (fourth revision)
32 IS 1284:1975 Wrought aluminium alloy bolt and screw stock for general Oct 2006
engineering purposes (second revision)
33 IS 1285:2002 Wrought aluminium and aluminium alloys - Extruded Dec 2007
round tube and hollow sections for general engineering
purposes (third revision)
34 IS 1820:1979 Recommended shapes and sizes for aluminium notched Oct 2006
bars and ingots for remelting purposes (first revision)
35 IS 2047:1992 Aluminium alloy hardeners (Master alloys) (second Oct 2006 1
revision)
36 IS 2066:1962 Coding and classification for non-ferrous scrap metals Mar 2010
and residues
37 IS 2067:1975 Wrought aluminium wire for electrical purposes (first Dec 2007 1
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
27
38 IS 2304:1962 Procedure for inspection and testing of light metals Oct 2006
(aluminium and magnesium) and their alloy ingots and
castings for aircraft purposes
39 IS 2479:1981 Colour code for the identification of aluminium and Oct 2006
aluminium alloys for general engineering purposes
(second revision)
40 IS 2525:1982 Dimensions for wrought aluminium and aluminium alloys, Oct 2006
wire (first revision)
41 IS 2590:1987 Primary aluminium ingots for remelting for general Oct 2006
engineering purposes (second revision)
42 IS 2673:2002 Dimensions for wrought aluminium and aluminium alloys Dec 2007
extruded round tube (second revision)
43 IS 2676:1981 Dimension for wrought aluminium and aluminium alloy Oct 2006
sheet and strip (first revision)
44 IS 2677:1979 Dimensions for wrought aluminium and aluminium alloys, Oct 2006
plates and hot rolled sheets (first revision)
45 IS 2678:1987 Dimensions and tolerances for wrought aluminium and Oct 2006
aluminium alloy drawn roundtube (second revision)
46 IS 3420:1976 Procedure for inspection and testing of aluminium alloy Oct 2006
sheets and strips for aircraft purposes (first revision)
47 IS 3436:1978 Aluminium clad aluminium alloy sheet and strip for Oct 2006
aircraft purposes (Alloy 24345) (first revision)
48 IS 3577:1992 Wrought aluminium and aluminium alloys rivet, bolt and Oct 2006
screw stock - Dimensionsand tolerances (first revision)
49 IS 3704:1966 Methods for sampling of light metals and their alloy Oct 2006
products
50 IS 3965:1981 Dimensions for wrought aluminium and aluminium alloy Oct 2006 1
bar, rod and section (first revision)
51 IS 4026:2007 Aluminium ingots billets and wire bars (EC grade) (fourth
revision)
52 IS 5047(Part 1):1986 Glossary of terms relating to aluminium and aluminium Oct 2006
alloys Part 1 Unwrought and wrught metals (second
revision)
53 IS 5047(Part 2):1979 Part 2 Plant and operations, thermal treatment, control Oct 2006
and testing, finishing
54 IS 5047(Part 3):1979 Part 3 Geometric properties and toolerances, structural Oct 2006
and surface defects
55 IS 5052:1993 Aluminium and its alloys - Temper designations (first Dec 2007
revision)
56 IS 5082:1998 Wrought aluminium and aluminium alloy bars, rods, tubes Dec 2007 2
and sections for electrical applications (second revision)
57 IS 5425(Part 1):1969 Methods of chemical analysis of misch metal Part 1 Dec 2007
Determination of cerium
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
28
58 IS 5425(Part 2):1984 Part 2 Determination of total rare earths Dec 2007
59 IS 5425(Part 3):1987 Part 3 Determination of iron Mar 2010
60 IS 5425(Part 4):1987 Part 4 Determination of aluminium Mar 2010
61 IS 5425(Part 5):1987 Part 5 Determination of carbon Mar 2010
62 IS 5484:1997 EC grade aluminium rod produced by continuous casting Oct 2006 1
and rolling (first revision)
63 IS 6051:1970 Code for designation of aluminium and its alloys Mar 2010
64 IS 6477:1983 Dimensions for wrought aluminium and aluminium alloys, Mar 2010
extruded hollow section (first revision)
65 IS 6694:1999 Magnesium ingot for remelting (second revision) Mar 2010
66 IS 6751:1972 Aluminium alloy castings and strips for bearings Mar 2010
67 IS 6754:1972 Aluminium alloy ingots for bearings Mar 2010
68 IS 7092(Part 1):1992 Aluminium alloy tubes for irrigation purposes Part 1 Oct 2006
Welded tubes (second revision)
69 IS 7092(Part 2):1987 Part 2 Extruded tubes (second revision) Oct 2006 2
70 IS 7428:1974 Aluminium alloy extruded bars, rods and sections (for Oct 2006
aircraft purposes) (Alloy24345)
71 IS 7429:1974 Procedure for inspecction and testing of aluminium and Oct 2006
aluminium alloy extrudedbars, rods and sections (for
aircraft purposes)
72 IS 7658:1975 Spectrographic analysis of aluminium Mar 2010
73 IS 7670:2002 Aluminium alloy forging stock and forgings (for parts Dec 2007
operated at elevated temperatures) for aerospace
applications (Alloy 22588) (first revision)
74 IS 7674:1975 Procedure for inspection and testing of aluminium and Oct 2006
aluminium alloy forging stock and forgings for aircraft
purposes
75 IS 7793:1975 Aluminium alloys for IC engine pistons Oct 2006 1
76 IS 7882:1975 Aluminium alloy sheet and strip for aircraft purposes Mar 2010
(Alloy 19000)
77 IS 7883:1975 Aluminium-manganese sheet and strip for aircraft Mar 2010
purposes (Alloy 31000)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
29
78 IS 7902:2001 Aluminium alloy forging stock and forgings (Alloy 24345) Dec 2007
for aircraft purposes (first revision)
79 IS 8474:1977 Procedure for inspection and testing of aluminium and Oct 2006
aluminium alloy wires (for rivets) for aircraft purposes
80 IS 8513:1977 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010 1
purposes (Alloy 55000)
81 IS 8514:1977 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010 1
purposes (Alloy 24530)
82 IS 8515:1977 Aluminium wire for cold forged rivets for aircraft Mar 2010 1
purposes (Alloy 19500)
83 IS 8560:1977 Aluminium clad aluminium alloy sheet and strip for aircraftMar 2010
purposes (Alloy 24530)
84 IS 8561:1977 Aluminium alloy clad sheet and strip for aircraft purposes Mar 2010
(Alloy 76528)
85 IS 8936:1978 Aluminium alloy for wire for cold forged rivets for aircraft Oct 2006
purposes (Alloy 24350)
86 IS 8937:1978 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010
purposes (Alloy 22500)
87 IS 8938:1978 Aluminium alloy wire for cold forged rivets for aircraft Mar 2010
purposes(Alloy 24345)
88 IS 9612:1980 Aluminium tubes for refrigeration purposes Oct 2006
89 IS 9997:1991 Aluminium alloy redraw rods for electrical purposes (first Oct 2006 1
revision)
90 IS 10257:1982 Aluminium foil stock Mar 2010
91 IS 10259:1982 General conditions for delivery and inspection of Mar 2010
aluminium and aluminium alloyproducts
92 IS 11035:1984 Methods for spectrographic analysis of wrought Mar 2010
aluminium alloys
93 IS 11804:1986 Code of practice for manufacture of aluminium alloy Oct 2006
pressure die castings
94 IS 11861:1986 Titanium and titanium alloy strip, sheet and plate Mar 2010
95 IS 11890:1987 High purity aluminium ingot for remelting for special Oct 2006
applications
96 IS 11901:1986 Titanium sponge Mar 2010
97 IS 11902:1986 Titanium and titanium alloy bars and billets Mar 2010
98 IS 11998:1987 Aluminium for the manufacture of alloys for IC engine Oct 2006
pistons
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
30
99 IS 12308(Part 7):1991 Part 7 Determination of nickel by dimethyl glyoxime Oct 2006
(gravimetric) method(for nickel 0.5 to 36 percent)
100 IS 12389:1988 Seamless and welded titanium and titanium alloy fitting Mar 2010
101 IS 12442:1988 Seamless and welded titanium and titanium alloy tubes Mar 2010
for condensers and heat exchangers
102 IS 12644:1989 Titaniium and titanium alloy pipe, seamless and welded Mar 2010
103 IS 12828:1989 Recommended practice for descaling and cleaning Mar 2010
titanium and titanium alloy surfaces
104 IS 14712:1999 Wrought Aluminium and its alloy chequered tread sheets Mar 2010 1
for general engineeringpurposes
105 IS 15392:2003 Aluminium & Aluminium alloy bare foil for food packaging Dec 2007
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.MTD 7(4981) Aluminium and Aluminium alloy foil for pharmacentical
packaging
2 DOC.MTD 7(4799) Poly laminated aluminium cable wrap
DRAFT STANDARD COMPLETED WIDE CIRCULATION
1 DOC.MTD 7(4753) Primary aluminium ingots for remelting for general
engineering purposes (third revision of iS 2590)
2 DOC.MTD 7(4754) Wrought aluminium and aluminium alloys - Chemical
composition and form of products - Part 1 Chemical
Composition
3 DOC.MTD 7(4755) Aluminium and aluminium alloy - Wrought products -
Temper designation (second revision of IS 5052)
PRODUCT 52
METHODS OF TEST 15
CODE OF PRACTICES 7
TERMINOLOGY 4
DIMENSION 8
SYMBOLS 1
OTHERS 18
TOTAL : 105
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
31
MTD 8 COPPER AND COPPER ALLOYS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of copper and copper alloys and products and their
chemical/instrumental analysis
LIAISON
ISO/TC 26 Copper and copper alloys
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 28:1985 Phosphor bronze ingots and castings (fourth revision) Apr 2006 1
2 IS 191:2007 Copper (fourth revision)
3 IS 288:1981 Arsenical copper rods for boiler stay bolts and rivets Apr 2006 1
(second revision)
4 IS 291:1989 Naval brass rods and sections for machining purposes Apr 2006
(third revision)
5 IS 292:1983 Leaded brass ingots and castings (second revision) Apr 2009 1
6 IS 304:1981 High tensile brass ingots and castings (second revision) Apr 2006
7 IS 305:1981 Aluminium bronze ingots and castings (second revision) Apr 2006
8 IS 306:1983 Tin bronze ingots and castings (third revision) Apr 2009 1
9 IS 318:1981 Leaded tin bronze ingots and castings (second revision) Apr 2006 2
10 IS 319:2007 Free cutting brass bars, rods and sections (fifth revision)
11 IS 320:1980 High tensile brass rods and sections (other than forgings Apr 2006 1
stock) (second revision)
12 IS 407:1981 Brass tubes for general purposes (third revision) Apr 2006 2
13 IS 410:1977 Cold rolled brass sheet, strip and foil (third revision) Apr 2006 1
14 IS 422:1981 Brass sheet and strip for the manufacture of utensils Apr 2006
(second revision)
15 IS 440:1964 Methods of chemical analysis of copper (revised) Apr 2006
16 IS 531:1981 Leaded brass strips for instrument parts (second Apr 2006
revision)
17 IS 613:2000 Copper rods and bars for electrical purposes (third Apr 2006 1
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
32
18 IS 1028:1987 Silicon bronze ingots and castings (second revision) Apr 2009
19 IS 1264:1997 Brass gravity die castings (ingots and castings) (fourth Apr 2009 1
revision)
20 IS 1408:1968 Recommended procedure for inspection of copper-base Apr 2006
alloy sand castings (first revision)
21 IS 1458:1965 Railway bronze ingots and casting (revised) Apr 2006 4
22 IS 1545:1994 Solid drawn copper and copper alloy tubes for Apr 2006
condenser and heat exc hangers - Specification (third
revision)
23 IS 1897:2008 Copper strip for electrical purposes (third revision)
24 IS 2283:2000 Nickel silver sheet, strip and foil (second revision) Apr 2006
25 IS 2305:1988 Method for mercurous nitrate test for copper and copper Apr 2009
alloys (first revision)
26 IS 2376:1963 Colour code for the identification of copper & copper Apr 2006
alloys
27 IS 2378:1974 Code for designation of copper and copper alloys (first Apr 2006
revision)
28 IS 2451:1994 Nickel silver ingots and castings for cutlery and hollow- Apr 2006 1
ware (first revision)
29 IS 2501:1995 Solid drawn copper tubes for general engineering Apr 2006
purposes (third revision)
30 IS 2704:1983 Brass wires for cold-headed and machined parts (first Apr 2009 1
revision)
31 IS 2768:1982 Copper alloy strip for bullet envelope (first revision) Apr 2009
32 IS 2826:1986 Dimensions and tolerances for copper and copper alloy Apr 2006
rods and bars for generalengineering purposes (third
revision)
33 IS 3051:1988 Dimensions and tolerances for wrought copper and Apr 2006
copper alloy plate (first revision)
34 IS 3052:1986 Dimensions and tolerances for wrought copper and Apr 2006
copper alloy sheet, strip and foil for general engineering
purposes (second revision)
35 IS 3091:1999 Aluminium bronze ingots and castings for overhead Apr 2009
fittings in electrical traction (First Revision)
36 IS 3167:1982 Cap copper alloy strip (first revision) Apr 2009
37 IS 3168:1981 Brass strip and foil for deep drawing (first revision) Apr 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
33
38 IS 3186:1965 Methods of chemical analysis of cadmium copper Apr 2006
39 IS 3187:1965 Methods of chemical analysis of copper-nickel zinc alloys Apr 2006
40 IS 3288(Part 1):1986 Glossary of terms for copper and copper alloys Part 1 Apr 2006
Materials (third revision)
41 IS 3288(Part 2):1986 Part 2 Unwrought form and cast form Apr 2006
42 IS 3288(Part 3):1986 Part 3 Wrought forms Apr 2006
43 IS 3288(Part 4):1986 Part 4 Processing Apr 2006
44 IS 3288(Part 5):1986 Part 5 Heat treatment Apr 2006
45 IS 3288(Part 6):1986 Part 6 Finishes Apr 2006
46 IS 3288(Part 7):1986 Part 7 Dimensional surfaces and structural characterstics Apr 2006
47 IS 3288(Part 8):1986 Part 8 Packing Apr 2006
48 IS 3331:2007 Copper and brass strips/foils for radiator cores (second
revision)
49 IS 3685:1966 Methods of chemical analysis of brasses Apr 2006
50 IS 3863:1966 Methods of chemical analysis of copper-tellurium alloys Apr 2006
51 IS 4027(Part 1):1987 Methods of chemical analysis of bronzes Part 1 Apr 2006
Determination of copper and leadby electrolytic method
(first revision)
52 IS 4027(Part 2):1987 Part 2 Determination of manganese-photometric method Apr 2006
(first revision)
53 IS 4027(Part 3):1987 Part 3 Determination of phosphorus by volumetric Apr 2006
method (first revision)
54 IS 4027(Part 4):1987 Part 4 Determination of nickel-dimethylglyoxime Apr 2006
photometric method (first revision)
55 IS 4027(Part 5):1987 Part 5 Determination of tin-iodimetric method (first Apr 2006
revision)ethod (first revision)
56 IS 4027(Part 6):1987 Part 6 Determination of zinc by complexometric (EDTA) Apr 2006
method (first revision)
57 IS 4027(Part 7):1990 Part 7 Determination of antimony by Rhodamine B Dec 2007
spectrophotometric method (firsr revision)
58 IS 4027(Part 8):1991 Part 8 Determination of iron (first revision) Dec 2007
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
34
59 IS 4027(Part 9):1991 Part 9 Determination of aluminium by AAS method (first Dec 2007
revision)
60 IS 4027(Part 10):2000 Part 10 Determination of silicon Apr 2006
61 IS 4027(Part 11):2000 Part 11 Determination of Lead- Ethylenediamine Apr 2006
Tetraacetic acid (EDTA) - Titrimetric method
62 IS 4076:1983 Hard brass wires for springs and other special purposes Apr 2009 1
(first revision)
63 IS 4131:1967 Nickel copper alloy castings Apr 2006
64 IS 4170:1967 Brass rods for general engineering purposes Apr 2006 2
65 IS 4171:1983 Copper rods and bars for general engineering purposes Apr 2009 1
(first revision)
66 IS 4412:1981 Copper wires for general engineering purposes (first Apr 2006 1
revision)
67 IS 4413:1981 Brass wires for general engineering purposes (first Apr 2006 1
revision)
68 IS 4519:1977 Dimensions for copper commutator bars (first revision) Apr 2006
69 IS 4548(Part 1):1967 Methods of chemical analysis of copper gold brazing Apr 2006
alloys Part 1 Analysis of gold and copper
70 IS 4646(Part 1):1968 Methods of chemical analysis of copper phosphorus Dec 2007
brazing alloys, Part 1 Analysis for silver and copper
71 IS 4646(Part 2):1976 Part 2 Determination of phosphorusnation of phosphorus Dec 2007
72 IS 4667(Part 1):1968 Methods of chemical analysis of silver copper brazing Dec 2007
alloys Part 1 Analysis for silver and copper
73 IS 4667(Part 2):1969 Part 2 Determination of silver, copper and tin Dec 2007
74 IS 4667(Part 3):2001 Part 3 Determination of nickel, cadmium and zinc Nov 2005
75 IS 4667(Part 4):2001 Part 4 Determination of copper, cadmium and zinc by Nov 2005 1
electrolytic method
76 IS 5053:1969 Dimensions for wrought copper and copper alloy rods Apr 2006
for fasteners
77 IS 5493:1981 Dimensions for wrought copper and copper alloy tubes Apr 2006
(first revision)
78 IS 5743:1991 Copper master alloys - (first revision) Apr 2006
79 IS 5744:1991 Copper alloy screwed ferrules for condenser, heater Apr 2006 1
and cooler tubes (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
35
80 IS 5885:1977 Copper for commutator bars (first revision) Apr 2006
81 IS 6912:2005 Copper and copper alloy forging stock and forgings
(second revision) (Superseding IS 3488:1980)
82 IS 7608:1987 Phosphor bronze wire for general engineering purposes Apr 2006 1
(first revision)
83 IS 7811:1985 Phosphor bronze rods and bars (first revision) Apr 2006 4
84 IS 7814:2005 Phosphor bronze sheet and strip (second revision)
85 IS 8328:2007 Free cutting copper bars, rods and sections (first
revision)
86 IS 8362:1977 Copper and copper alloy rolled plates for condensers Apr 2006
and heat exchangers
87 IS 8364:1989 Free cutting brass wire (first revision) Apr 2006
88 IS 8365:1991 Copper alloys for spot and seam resistance welding Apr 2006
electrodes (first revision)
89 IS 8631:1977 Copper base alloys for marine propellers Apr 2006
90 IS 8859:1978 Cast copper tuyere Apr 2006
91 IS 9682:1980 Recommended procedure for inspection of cast copper Apr 2006
tuyeres
92 IS 9713:1983 Hot rolled electrolytic copper wire rod for electrical Apr 2009
conductors (first revision)
93 IS 9805:1981 High conductivity copper castings Apr 2006
94 IS 9861:1981 Dimensions for wrought copper and copper alloy wires Apr 2006
for general engineering purposes
95 IS 10569:2005 Aluminnium bronze rods and bars (first revision)
96 IS 10709:1983 Brass wires for fourdrinier cloth Apr 2009 1
97 IS 10710:1983 Phosphor bronze wires used for fourdrinier cloth Apr 2009 2
98 IS 10742:1983 Cast gun metal rods and bars Apr 2009 1
99 IS 10757:1983 Nickel silver rods and bars Apr 2009 1
100 IS 10773:1995 Copper tubes for refrigeration purposes (first revision) Apr 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
36
101 IS 11109:1984 Silicon brass ingots and castings Apr 2006
102 IS 12228:1987 Method for scale adhesion test for oxygen free copper Apr 2006
/ ISO 4746 : 1977
103 IS 12443:1988 Rolled brass plates for general engineering purposes Apr 2009
104 IS 12444:1988 Continuously cast and rolled electrolytic copper wire Apr 2009 2
rods for electrical conductors
105 IS 12558:1988 Recommended shape, size and mass of copper and Apr 2009
copper alloy ingots for remelting purposes
106 IS 14340:1996 Brass for current carrying parts in electrical wiring Apr 2006
accessories
107 IS 14810:2000 Copper tubes for plumbing Apr 2006
108 IS 14811:2000 Rolled copper plate, sheet, strip and coils for general Apr 2006
engineering purposes (Superseding IS 1550, IS 1972 & IS
3487)
DRAFT STANDARD COMPLETED WIDE CIRCULATION
1 DOC.MTD 8(4984) Phosphor bronze rods and bars ( second revision of IS
7811)
PRODUCT 59
METHODS OF TEST 19
CODE OF PRACTICES 3
TERMINOLOGY 8
DIMENSION 8
OTHERS 11
TOTAL : 108
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
37
MTD 9 LEAD, ZINC, CADMIUM, TIN, ANTIMONY OTHER NON-FERROUS SPECIAL METALS
AND THEIR ALLOYS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of lead, zinc, cadmium, tin, antimony , nickel,
molebednum tungsten and other special non-ferrous metals (excluding light
metals) and their alloys including their chemical/instrumental analysis
LIAISON
ISO/TC 18 Zinc and zinc alloys
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 25:1979 Antifriction bearing alloys (third revision) May 2008
2 IS 26:1992 Tin ingot (fourth revision) May 2008
3 IS 27:1992 Pig lead (fourth revision) May 2008 1
4 IS 193:2000 Soft solder (fifth revision) Jan 2005 1
5 IS 209:1992 Zinc ingot (fourth revision) May 2007 1
6 IS 211:1992 Antimony ingot (fourth revision) May 2008
7 IS 403:1964 Methods of chemical analysis of lead and antimonial lead Jan 2005
(revised)
8 IS 404(Part 1):1993 Lead pipes Part 1 For other than chemical purposes May 2008
(third revision)
9 IS 404(Part 2):1993 Part 2 For chemical purposes (third revision) May 2008
10 IS 405(Part 1):1992 Lead sheet and strips Part 1 For chemical industries May 2008
(third revision)
11 IS 405(Part 2):1992 Part 2 For other than chemical purposes (third revision) May 2008 2
12 IS 406:1964 Methods of chemical analysis of slab zinc (spelter) Jan 2005
(revised)
13 IS 713:1981 Zinc base alloy ingots for die casting (second revision) May 2008
14 IS 742:1981 Zinc base alloy die castings (second revision) May 2008
15 IS 998(Part 1):1983 Methods of chemical analysis of solders (soft and rosin May 2008
cored) Part 1 Determination of tin and antimony (first
revision)
16 IS 998(Part 2):1983 Part 2 Determination of iron,copper and arsenic (first May 2008
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
38
17 IS 998(Part 3):1983 Part 3 Determination of cadmium, zinc, aluminium, May 2008
bismuth and nickel (first revision)
18 IS 999:1959 Method of chemical analysis of brazing solder May 2008
19 IS 1047:1965 Methods of chemical analysis of antimony (revised) Jan 2005
20 IS 1409:1959 Methods of chemical analysis of antifriction bearing alloys Jan 2005
21 IS 1654:1992 Lead antimony alloys (third revision) May 2008
22 IS 1655:1991 Zinc alloys - Code of practice for manufacture of Apr 2006
pressure die castings (secondrevision)
23 IS 1817:1961 Methods of sampling non-ferrous metals for chemical Jan 2005
Analysis
24 IS 1921:2005 Flux-cored solder wire (second revision)
25 IS 1940:1969 Methods of chemical analysis of tin ingot (first revision) Jan 2005
26 IS 1952:1963 Methods of chemical analysis of nickel anodes Jan 2005 1
27 IS 2258:1981 Rolled zinc plate, sheet and strip (second revision) May 2008
28 IS 2390:1967 Methods for chemical analysis of foundry nickel Jan 2005
29 IS 2599:1983 Methods for spectrographic analysis of high purity zinc Jan 2005
and zinc base alloys for die casting (first revision)
30 IS 2600(Part 1):1988 Methods of chemical analysis of zinc and zinc base May 2008
alloys for die castings Part 1 Determination of copper,
iron, nickel, tin and thallium by spectrophotometric method
(first revision)
31 IS 2600(Part 2):1988 Part 2 Determination of copper,iron, lead and cadmium May 2008
by atomic absorption spectrophotometric method (first
revision)
32 IS 2600(Part 3):1993 Part 3 Determination of Indium by atomic absorption May 2008
spectrometry method (first revision)
33 IS 2600(Part 4):1993 Part 4 - Determination of chromium by spectrophotometricMay 2008
method
34 IS 2766(Part 1):1968 Methods of chemical analysis of primary nickel Jan 2005
35 IS 3717:1977 Refined secondary lead (first revision) May 2008
36 IS 4280:1992 Refined secondary tin ingot (second revision) May 2008
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
39
37 IS 4354(Part 1):1967 Methods of chemical analysis of magnesium, aluminium Jan 2005
brazing alloys, Part 1 Analysis of aluminium, manganese,
zinc and silicon
38 IS 4699:1984 Refined secondary zinc (first revision) Apr 2006 2
39 IS 5479:1985 Solders for jointing aluminium and aluminium alloys (first Apr 2006
revision)
40 IS 6344:2006 Cadmium metal (second revision)
41 IS 6516:1972 Methods for chemical analysis of tin and lead in Jan 2005
secondary tin
42 IS 8097:1976 Methods of chemical analysis of soft solders for jointing Jan 2005
aluminium and aluminium alloys
43 IS 8439:1977 Methods for sampling of lead and lead alloys May 2008
44 IS 8475:1977 Lead based antifriction bearing alloy for heavy duty May 2008
applications
45 IS 8812(Part 1):1978 Methods for chemical analysis of hard solders for jointing May 2008
aluminium and aluminium alloys, Part 1 Determination of
silver, copper, zinc, antimony ,arsenic, iron and bismuth
46 IS 8812(Part 2):1982 Part 2 Determination of aluminium May 2008
47 IS 8816:1978 Methods for selection and preparation of samples for Jan 2005
spectrographic analysis ofzinc and zinc alloy ingots
48 IS 11516:2005 Soft solder for electronic applications (first revision)
49 IS 11900:1986 Tungsten rods and tungsten wire for lamps and electron Jan 2005
devices
50 IS 12445:1988 Molybdenum plate, sheet, strip and foil Jan 2005
51 IS 12447:1988 Zinc wire for sprayed zinc coatings May 2008 1
52 IS 12465:1988 Molybdenum wires for lighting and electronic application Nov 2005
53 IS 13229:1991 Zinc for galvanizing May 2008 2
54 IS 13350:1992 Molybdenum rod Jan 2005
55 IS 13351:1992 Thoriated tungsten wires and rods Jan 2005
56 IS 13923:1993 Lead seal May 2007 1
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
40
57 IS 13963(Part 1):1994 Chemical analysis of cadmium metal - Part 1 May 2008
Determination of copper, zinc, leadand iron
58 IS 13963(Part 2):1994 Chemical analysis of cadmium metal Part 2 May 2008
Determination of nickel, arsenic, antimony and
thallium by spectrometric methods
59 IS 14644(Part 1):1998 Nikel alloys - Flame atomic absorption spectrometric Jan 2005
/ ISO 7530-1-1:1990 analysis method - Part 1 General requirements and
sample dissolution
60 IS 14644(Part 2):1998 Part 2 Determination of cobalt content Jan 2005
/ ISO 7530-2:1990
61 IS 14644(Part 3):1998 Part 3 Determination of chromium content Jan 2005
/ ISO 7530-3:1990
62 IS 14644(Part 4):1998 Part 4 Determination of copper content Jan 2005
/ ISO 7530-4:1990
63 IS 14644(Part 5):1998 Part 5 Determination of iron content Jan 2005
/ ISO 7530-5:1990
64 IS 14644(Part 6):1998 Part 6 Determination of manganese content Jan 2005
/ ISO 7530-6:1990
65 IS 14644(Part 7):2000 Part 7 Determination of aluminium content Jan 2005
/ ISO 7530 -7:1992
66 IS 14644(Part 8):2000 Part 8 Determination of silicon content Jan 2005
/ ISO 7530-8:1992
67 IS 14644(Part 9):2000 Part 9 Determination of vanadium content Jan 2005
/ ISO 7530-9:1993
68 IS 14651:1999 Multifilamentary Nb-Ti super conducting wires Jan 2005
69 IS 14688:1999 Lead-Antimony alloy bricks for radiation shielding Jan 2005
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.MTD 9(5014) Draft Amendment no. 1 to IS 26:1992 Antifriction bearing
alloys (third revision)
2 DOC.MTD 9(5015) Draft Amendment no. 3 to IS 13229:1991 Lead Seal
3 DOC.MTD 9(5016) Draft Amendment no. 1 to IS 3717 : 1977 Refined
secondary lead ( first revision )
PRODUCT 30
METHODS OF TEST 20
CODE OF PRACTICES 3
OTHERS 16
TOTAL : 69
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
41
MTD 10 PRECIOUS METALS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of precious metals
LIAISON
ISO/TC 174
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 639:1982 Gold leaf (second revision) Nov 2009
2 IS 964:1956 Methods for chemical analysis of silver solder Mar 2009
3 IS 1417:1999 Gold and Gold alloys-jewellery/Artefacts -Fineness and Feb 2004 2
Marking-Specification (third revision)
4 IS 1418:2009 Method for assaying of gold in gold bullions gold alloys Feb 2004
and jewellary/artefacts -Cupellation (Fire assay) method
(second revision)
5 IS 1953:1973 Methods of chemical analysis of silver anodes (first Nov 2005
revision)
6 IS 2112:2003 Grades of silver and silver alloys (first revision) Feb 2009 3
7 IS 2113:2002 Methods for assaying of silver in silver and silver Sep 2007 1
alloys (first revision)
8 IS 2270:1965 Method for assaying of platinum and platinum alloys Nov 2005
9 IS 2271:1967 Recommended method for spectrographic analysis of Nov 2005
platinum
10 IS 2275:1984 Grades of platinum (first revision) Nov 2005
11 IS 2279:1980 Fine silver bar, sheet, wire, granules and token (first Nov 2009
revision)
12 IS 2767:1984 Gold thread (silver base)(first revison) Nov 2005
13 IS 2790:1999 Guidelines for manufacture of 23.3, 22, 21, 18, 14, 12 Feb 2009
and 9 carat gold (firstrevision)
14 IS 3088:1967 Method for assaying of fine grade palladium Nov 2005
15 IS 3095:1999 Gold solders for use in manufacture of jewellery - Nov 2009 1
Specifiction (second revision)
16 IS 3096:2003 Fine grade palladium - Specification (first revision) Feb 2009
17 IS 3110:1982 Silver leaf (first revision) Nov 2005
18 IS 3111:1984 Silver thread (first revision) Nov 2005
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
42
19 IS 3112:1984 Gold and silver embroidery materials (first revision) Nov 2005
20 IS 3571:1985 Dental gold solders (first revision) Nov 2005
21 IS 3578:1985 Dental gold alloy wire (first revision) Nov 2005
22 IS 3610:1985 Dental gold foil (first revision) Nov 2005
23 IS 4134:1967 Recommended colour classification of rough diamonds Nov 2005
24 IS 4703:1968 Methods of chemical analysis of silver-manganese Nov 2005
brazing alloys
25 IS 4704:1985 Silver tin dental amalgam alloy (first revision) Nov 2005 1
26 IS 4705:1985 Dental mercury (first revison) Nov 2005
27 IS 4799:1985 Dental casting gold alloys, non-porcelain bonding (first Nov 2005
revision)
28 IS 5954:1985 Dental white gold alloys (first revision) Nov 2005
29 IS 6018:1993 Platinum, platinum rhodium catalyst gauges (first revision)Nov 2009
30 IS 6019:1993 Platinum dish (first revision) Nov 2009
31 IS 6170:1971 Platinum crucible and lid Nov 2009
32 IS 6683:1998 Diameters of wires for platinum group metals and their Nov 2009
alloys (First Revision)
33 IS 6882:1973 Platinum electrodes Nov 2009
34 IS 6889:2000 Method for chemical analysis of silver tin dental amalgam Nov 2009 1
alloy (first revision)
35 IS 6890(Part 1):1989 Method for chemical analysis of dental gold alloys Part 1 Nov 2009
Determination of gold, silver, palladium and platinum (First
Revision)
36 IS 6890(Part 2):1975 Part 2 Determination of nickel and zinc Nov 2009
37 IS 7225:1985 Dental cobalt chromium casting alloy (first revision) Nov 2005
38 IS 7255(Part 1):1974 Methods of chemical analysis of solders for use in Nov 2009
goldware Part 1 Determination of gold, silver and copper
39 IS 7255(Part 2):1977 Part 2 Determination of cadmium and zinc by Nov 2009
polarographic method
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
43
40 IS 7562:1974 Gold cladding Nov 2009
41 IS 8858:1978 Methods for spectrographic analysis of fine silver ingot Nov 2005
(grades 9999 and 999)
42 IS 8929:1978 High purity gold wire for electrical contacts Nov 2009
43 IS 9443:1980 Guidelines for marking purity of silver on silver Nov 2009
articles/ornaments
44 IS 9925:1981 Method for determination of gold and silver in gold and Nov 2009
silver thread and embroidery materials
45 IS 11095:1984 Bi-metallic strips and bars with precious metal on Nov 2009
phosphor bronze base for electrical contacts
46 IS 12144:1987 Fine silver wire for electrical contacts Nov 2009
47 IS 13600:1992 Chemical analysis of silver palladium alloys Nov 2009
48 IS 14741:1998 Colour of gold alloys - Definition, range of colour and Nov 2005
/ ISO 8654:1987 designation
49 IS 15329:2003 Platinum and platinum alloys, jewellery/artefacts -
Fineness and marking - Specification
50 IS 15766(Part 2):2007 Grading polished diamond Part 2 Test methods
51 IS 15766(Part 1):2007 Part 1 Classification
52 IS 15820:2009 General requirements for component or assaying &
hallmarking centre
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 10(4866) Jewellery - Ring sizes - Definition, measurement and
designation (ISO 8653:1986)
2 DOC.MTD 10(4887) Jewellery - Gold alloy coating (ISO 10713)
3 DOC.MTD 10(4970) Jewellery - Determination of platinum in platinum
jewellery alloys inductively coupled plasma (ICP) solution
- spectrometric method using yttrium as internal standard
element (adoption of ISO 11494:2008)
4 DOC.MTD 10(4971) Jewellery - determination of palladium in palladium -
jewellery alloys inductively coupled plasma (ICP) solution
spectrometric method usng yttrium as internal standard
element (adoption of ISO 11495:2006)
PRODUCT 24
METHODS OF TEST 12
DIMENSION 1
OTHERS 15
TOTAL : 52
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
44
MTD 11 WELDING GENERAL SECTIONAL COMMITTEE
SCOPE - Standardization in the field of welding fundamental consubles , equipment
(other than electrical) testing training safety etc.
LIAISON
ISO/TC 44 Welding and allied processes
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 ** IS 812:1957 Glossary of terms relating to welding and cutting of metalsSep 2008
2 IS 813:1986 Scheme of symbols for welding (revised) Sep 2008
3 IS 814:2004 Covered electrodes for manual metal arc welding of 1
carbon and carbon manganese steel (sixth revision)
4 IS 817:1966 Code of practice for training and testing of metal arc Sep 2008
welders (revised)
5 IS 817(Part 1):1992 Part 1 Manual metal arc welding (second revision) Sep 2008
6 IS 817(Part 2):1996 Part 2 Oxyfuel welding (second revision) Sep 2008
7 IS 818:1968 Code of practice for safety and health requirements in Sep 2008
electric and gas weldingand cutting operations (first
revision)
8 IS 822:1970 Code of procedure for inspection of welds Sep 2008
9 * IS 1179:1967 Equipment for eye and face protection during welding Sep 2008 1
(first revision)
10 IS 1278:1972 Filler rods and wires for gas welding (second revision) Sep 2008 2
11 IS 1393:1961 Code of practice for training and testing of oxy acetylene Sep 2008
welders
12 IS 1395:1982 Low and medium alloy steel covered electrodes for Sep 2008
manual metal arc welding (third revision)
13 IS 2927:1975 Specification for brazing alloys (first revision) Sep 2008 1
14 IS 3016:1982 Code of practice for fire precautions in welding and Mar 2006
cutting operations (firstrevision)
15 IS 3600(Part 1):1985 Methods of testing fusion welded joints and weld metal in Sep 2008
steel (second revision) Part 1 Cruciform fillet weld
tensile test
16 IS 3600(Part 2):1985 Part 2 Beam impact (charpy V-notch) test Sep 2008
17 IS 3600(Part 3):2009 Part 3 Transverse tensile test on butt welds Mar 2006
/ 4136:2001
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
45
18 IS 3600(Part 4):1984 Part 4 Longitudinal tensile test on cylindrical weld metal Mar 2006
test pieces on butt welds
19 IS 3600(Part 5):1983 Part 5 Transverse root and face bend test on butt welds Mar 2006
/ ISO 5173:1981 (second revision)
20 IS 3600(Part 6):1983 Part 6 Transverse side bend test on butt welds (second Sep 2008
/ ISO 5177:1984 revision)
21 IS 3600(Part 7):1985 Part 7 Longitudinal root and face bend test on butt welds Sep 2008
22 IS 3600(Part 8):1985 Part 8 Nick break test and fillet weld fracture test Sep 2008
23 IS 3600(Part 9):1985 Part 9 Macro and micro examination Sep 2008
24 *IS 3613:1974 Acceptance tests for wire flux combination for Mar 2006 1
submerged arc welding (first revision)
25 IS 4943:1968 Assessment of butt and fillet fusion welds in steel sheet, Sep 2008
plate and pipe
26 IS 4972:1968 Resistance spot welding electrodes Sep 2008
27 IS 5206:1983 Covered electrodes for manual metal arc welding of Sep 2008
stainless steel and other similar high alloy steels (first
revision)
28 IS 5511:1991 Covered electrodes for manual metal arc welding of cast Sep 2008 1
iron_(first revision)
29 IS 5687:1970 Glossary of terms relating to welding of plastics Sep 2008
30 IS 5856:1991 Corrosion and heat resisting chromium-nickel steel solid Sep 2008
welding rods, bare electrodes (first revision)
31 IS 5857:1970 Nickel and nickel alloy bare solid welding rods and Sep 2008
electrodes
32 IS 5897:1985 Aluminium and aluminium alloy welding rods and wires Sep 2008
and magnesium alloy welding rods (first revision)
33 IS 5898:1970 Copper and copper alloy bare solid welding rods and Sep 2008
electrodes
34 IS 5922:1970 Qualifying tests for welders engaged in aircraft welding Sep 2008 1
35 IS 6016:1982 Hose connection for welding and cutting equipment (first Mar 2006
revision)
36 * IS 6419:1996 Welding rods and bare electrodes for gas shielded arc Mar 2010
welding of structural steel (First revision)
37 IS 6431:1971 Tolerances on dimensions of plates cut by flame Sep 2008
38 IS 6560:1996 Molybdenum and chromium-molybdenum low alloy steel Mar 2010
welding rods and bare electrodes for gas shielded arc
welding (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
46
39 *IS 6901:2009 Specification for pressure regulators for gas cylinders Mar 2006 2
/ 2503:1998 used in welding, cutting and related processes (first
revision)
40 IS 7273:1974 Method of testing fusion welded joints in aluminium and Sep 2008
aluminium alloys
41 * IS 7280:1974 Bare wire electrodes for submerged arc welding of Sep 2008 1
structural steels
42 IS 7303:1974 Covered electrodes for surfacing of metal by manual arc Sep 2008
welding
43 IS 7307(Part 1):1974 Approval tests for welding procedures Part 1 fusion Sep 2008
welding of steel
44 IS 7310(Part 1):1974 Approval tests for welders working to approved welding Mar 2006
procedures Part 1 fusion welding of steel
45 IS 7318(Part 1):1974 Approval tests for welders when welding procedure Sep 2008
approval is not required Part 1 Fusion welding of steel
46 IS 7318(Part 2):1974 Part 2 TIG or MIG welding of aluminium and its alloys Sep 2008
47 * IS 7653:1975 Manual blow pipes for welding and cutting Sep 2008
48 IS 8363:1976 Bare wire electrodes for electroslag welding of steels Sep 2008
49 IS 8484:1998 Metal powders welding electrodes (first revision) Mar 2010
50 IS 8666:1977 Copper and copper alloy covered electrodes for manual Sep 2008
metal arc welding
51 IS 8736:1977 Nickel and nickel alloy covered electrodes for metal arc Sep 2008
welding
52 IS 9495:1980 Test for brazeability of brazing alloys Sep 2008
53 **IS 10793:1983 Classification of defects in metallic fusion welds with Mar 2006
/ ISO 6520:1982 explanations
54 * IS 10803:1984 Method of sampling and preparation of weld pad for Mar 2006
chemical analysis of weld metal from covered electrodes
for manual metal arc welding
55 IS 10811:1984 Oxygen and acetylene manifold regulators for welding, Mar 2006
cutting and related processes
56 IS 10842:1984 Testing and evaluation procedure for Y groove Mar 2006
crackability test
57 IS 11368(Part 1):1985 Comparison of Indian and overseas classification and Sep 2008 1
coding of welding filler materials Part 1 Flux coated mild
steel and medium tensile steel electrodes for manual
metal arc welding
58 ** IS 11802:1986 Method of determination of diffusible hydrogen content of Sep 2008
deposited weld metalfrom covered electrodes in
welding mild and low alloy steels
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
47
59 IS 13007:1991 Tungston electrodes for inert gas shielded arc welding Sep 2008
| 6848:1984 and for plasma cutting and welding
60 IS 13043:1991 Covered manual metal arc welding electrodes - Sep 2008
| 2401:1972 Determination of efficiency , metal recovery and
depositin co-efficient
61 IS 13851:1993 Storage and redrying of covered electrodes before use - Mar 2006
recommendations
62 IS 15387:2003 Resistance Spot Welding - Male Electrode Caps Sep 2008
/ ISO 5830:1984
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 11(4741) Gas welding equipment - Hose connections for
equipment welding, cutting and allied processes (ISO
3253) (second revision IS 6016)
2 DOC.MTD 11(4739) Specification for classification and acceptance tests for
bare solid wire electrodes and wire-flux combination for
submerged arc welding of structural steel
3 DOC.MTD 11(4742) Destructive tests on welds in metallic materials -
Transverse tensile test (ISO 4136) (First revision of IS
3600)
PRODUCT 22
METHODS OF TEST 14
CODE OF PRACTICES 3
TERMINOLOGY 2
DIMENSION 1
OTHERS 20
TOTAL : 62
INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
48
MTD 12 WELDING APPLICATIONS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of joining, surfaceing, repairing and thermal cutting
application by arc welding, soldering, brazing friction welding, explosive,
ultrasonic welding etc.
LIAISON
ISO/TC 44 Welding and allied processes
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 * SP: ISI Handbook of manual metal-arc welding for welders Sep 2008
2 * SP 12 : 1975 ISI Handbook for gas welders Sep 2008
3 * SP 6(7) : 1972 Handbook for structural engineers simple welded girders Nov 2003
4 IS 816:1969 Code of practice for use of metal arc welding for general Sep 2008 1
construction in mildsteel (first revision)
5 IS 819:1957 Code of practice for resistance spot welding for light Sep 2008
assemblies in mild steel
6 IS 1024:1999 Code of practice for use of welding in bridges and Feb 2005
structures subject to dynamic loading (first revision)
7 IS 1261:1959 Code of practice for seam welding in mild steel Sep 2008 1
8 IS 1323:1982 Code of practice for oxy-acetylene welding for structural Sep 2008
work in mild steels (second revision)
9 IS 2751:1979 Recommended practice for welding of mild steel plain Sep 2008
and deformed bars for reinforced construction (first
revision)
10 * IS 2811:1987 Recommendations for manual tungsten inert gas arc Sep 2008
welding of stainless steel (first revision)
11 * IS 2812:1993 Recommendations for manual tungsten inert gas arc Sep 2008
welding of aluminium and aluminium alloys (first revision)
12 IS 3023:1965 Recommended practice for building up by metal spraying Sep 2008
13 IS 3525:1998 Metal arc welding for hull constructions of merchant Sep 2008
ships in carbon and carbon-manganese steels (second
revision)
14 IS 4353:1995 Submerged arc welding of mild steel and low alloy steels Mar 2006
- Recommendations (first revision)
15 IS 5139:1995 Repair of cast iron castings by oxy-acetlene and manual Mar 2006
metal arc welding - Recommendations (first revision)
16 IS 5530:2005 Recommendations for production rectification and repair Sep 2008
of steel castings by metal arc welding process (second
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
49
17 IS 6409:1971 Code of practice for oxy-acetylene flame cleaning Sep 2008
18 IS 6916:1973 Code of practice for fabrication welding of steel castings Sep 2008
19 IS 8002:1976 Recommended procedure for welding of flexible PVC Sep 2008
20 IS 8004:1976 Recommended procedure for welding of rigid PVC Sep 2008
21 IS 8455:1977 Recommended procedure for welding of polythlene Sep 2008
22 IS 8987:1978 Recommended practice for air carbon arc gauging and Sep 2008
cutting
23 IS 9006:1978 Recommended practice for welding of clad steels Sep 2008
24 IS 9417:1989 Recommendations for welding cold worked bars for Sep 2008
reinforced concrete construction (first revision)
25 IS 9524:1980 Recommended procedure for repair welding of steel Jun 2007 1
components by aluminothermic process
26 IS 9595:1996 Metal arc welding of carbon and carbon manganese Jun 2007
steels - Recommendations (first revision)
27 IS 10178:1995 CO2 gas shielded metal arc welding of structural steels - Mar 2006
Recommendations (firstrevision)
28 IS 10186:1982 Recommendations for manual tungsten inert gas arc Sep 2008
welding of copper and copper alloys
29 IS 10234:1982 Recommendations for general pipeline welding Sep 2008
30 * IS 10801:1984 Recommended procedure for heat treatment of welded Sep 2008
fabrications
31 * IS 11991:1986 Recommended practice for flash butt welding of tubes, Sep 2008
rods and other sections in carbon and alloy steel
32 IS 14289:1995 Manual tungsten inert gas arc welding of nickel and Mar 2006
nickel alloys - Recommendations
33 IS 14419:1996 Acceptance standards for radiographic examination of Sep 2008
welds for ships - Recommendations
34 IS 15326(Part 1):2003 Quality requirement for welding -Fusion welding of Sep 2008
/ ISO 3834(Pt 1):1994 metallic material Part 1 Guidelines for selection and use
35 IS 15326(Part 2):2003 Quality requirement for welding -Fusion welding of Sep 2008
/ ISO 3834(Pt 2):1994 metallic material Part 2 Comprehensive quality
requirements
36 IS 15326(Part 3):2003 Quality requirement for welding -Fusion welding of Sep 2008
/ ISO 3834(Pt 3):1994 metallic material Part 3 Standards quality requirements
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
50
37 IS 15326(Part 4):2003 Quality requirement for welding -Fusion welding of Sep 2008
/ ISO 3834(Pt 4):1994 metallic material Part 4 Elementary quality requirements
38 IS 15327:2003 Welding coordination - Tasks and responsibility Sep 2008
/ ISO 14731:1997
39 IS 15728:2006 Welding - Friction welding of metallic materials Sep 2008
/ 15620:2000
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.MTD 12(4958) Recommended practice for building up by thermal
spraying (first revision of IS 3023)
2 DOC.MTD 12(4959) Recommended practice for manual tungsten inert gas
welding of copper and copper alloys (first revision of IS
10186)
CODE OF PRACTICES 24
OTHERS 15
TOTAL : 39
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
51
MTD 13 ORES AND RAW MATERIALS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of ores and raw materials for metallurgical industry
including their chemical instrumental analysis
LIAISON
ISO/TC 65 Manganse and chromium ores
ISO/TC 102 Iron ores
ISO/TC 129 Aluminium ores and minerals
MTD 2, 29
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1335:1979 Methods for direct determination of alumina in refractory Oct 2006
materials (first revision)
2 * IS 1405:1982 Methods of sampling of iron ores (second revision) Nov 2008
3 * IS 1449:1976 Methods of sampling of mannganese ore (first revision) Nov 2008
4 IS 1472:1977 Methods of sampling ferro alloys for determination of Oct 2006 1
chemical composition (first revision)
5 IS 1473:2004 Methods of chemical analysis of manganese ores(first
revision)
6 * IS 1493:1959 Methods of chemical analysis of iron ores Oct 2006
7 IS 1493(Part 1):1981 Methods of chemical analysis of iron ores Part 1 Oct 2006
Determination of common constituents
8 IS 1493(Part 3):1987 Part 3 Determination of titanium, chromium, vanadium, Oct 2006
calcium and magnesium by atomic absorption
spectrophotometry
9 IS 1493(Part 4):1988 Part 4 Determination of aluminium by atomic absorption Oct 2006
spectrophotomety
10 IS 1493(Part 5):1990 Part 5 Determination of copper content atomic absorption Oct 2006
/ ISO 4693:1986 spectrometric method
11 IS 1493(Part 6):1990 Part 6 Determination of sodium and/or potassium Oct 2006
/ ISO 6831:1986 contents-Flame atomic abssorption spectrometric method
12 IS 1493(Part 7):1993 Part 7 Determination of lead and or zinc content - Flame Oct 2006
/ ISO 8753:1987 atomic absorption spectrometric method (first revision)
13 IS 1493(Part 8):1993 Part 8 Determination of arsenic content - Molybdenum Oct 2006
/ ISO 7834:1987 blue spectrophotometric method (first revision)
14 IS 1527:1972 Methods for chemical analysis of high silica refractory Oct 2006
materials (first revision)
15 IS 1760(Part 1):1991 Methods of chemical analysis of limestone, dolomite and Oct 2006
allied materials Part 1 Determination of loss on ignition
(first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
52
16 IS 1760(Part 2):1991 Part 2 Determination of silica (first revision) Oct 2006
17 IS 1760(Part 3):1992 Part 3 Determination of iron oxide, alumina, calcium oxide Oct 2006
and magnesia (first revision)
18 IS 1760(Part 4):1991 Part 4 Determination of carbon dioxide (first revision) Oct 2006
19 IS 1760(Part 5):1991 Part 5 Determination of chlorides (first revision) Oct 2006
20 * IS 1760(Part 6):2001 Part 6 Determination of free silica (first revision) Oct 2006
21 IS 1917(Part 1):1991 Chemical analysis of quartzite and high silica sand Part 1 Oct 2006
Determination of loss on ignition (first revision)
22 IS 1917(Part 2):1991 Part 2 Determination of sodium and potassium by flame Oct 2006
photometry (first revision)
23 IS 1917(Part 3):1992 Part 3 Determination of silica (first revision) Aug 2005
24 IS 1917(Part 4):1991 Part 4 Determination of aluminium by AAS method (first Oct 2006
revision)
25 IS 1917(Part 5):1992 Part 5 determination of iron by AAS method (first Aug 2005
revision)
26 IS 1917(Part 6):1992 Part 6 Determination of calcium and magnesium by atomicAug 2005
absorption spectrometric method (first revision)
27 * IS 1917(Part 7):2001 Part 7 Determination of titania (first revision) Oct 2006
28 IS 1999:1987 Methods of sampling bauxite (first revision) Nov 2008
29 IS 2000(Part 1):1985 Methods of chemical analysis of bauxite Part 1 Oct 2006
Determination of loss on ignition(first revision)
30 IS 2000(Part 2):1985 Part 2 Determination of silica (first revision)vision) Oct 2006
31 IS 2000(Part 3):1985 Part 3 Determination of alumina (first revision) Oct 2006
32 IS 2000(Part 4):1985 Part 4 Determination of ferric oxide (first revision) Oct 2006
33 IS 2000(Part 5):1985 Part 5 Determination of titania (first revision) Oct 2006
34 IS 2000(Part 6):1985 Part 6 Determination of vanadium (first revision) Oct 2006
35 IS 2000(Part 7):2001 Part 7 Determination of phosphorus pentroxide (first Oct 2006
revision)
36 IS 2000(Part 8):1989 Part 8 Determination of manganese by atomic absorption Oct 2006
spectrophotometric method (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
53
37 IS 2000(Part 9):1989 Part 9 Determination of magnesiuum and calcium by Oct 2006
atomic absorption spectrophotometric method (first
revision)
38 IS 2109:1982 Methods of sampling of dolomite, limestone and other Nov 2008
allied materias (first revision)
39 IS 2245:1962 Methods of sampling quartizite Nov 2008 1
40 IS 2246:1963 Methods of sampling of fluorspar (flourite) Aug 2005 1
41 IS 2411:1963 Methods of chemical analysis of fluorspar (fluorite) Oct 2006
42 IS 3191:1968 Methods of sampling of cryolite and aluminium trifluoride Aug 2005
43 IS 3200:2001 Methods of chemical analysis of cryolite (first revision) Oct 2007 1
44 IS 4104:1967 Method of chemical analysis of rutile Oct 2006
45 IS 4129:1967 Methods of chemical analysis of aluminium trifluoride Oct 2006 1
46 IS 4156:1967 Methods for sampling of barytes Aug 2005 1
47 IS 4166:1967 Methods of sampling of ilmenite and rutile Aug 2005
48 IS 4574:1989 Flourspar for use in metallurgical industries (second Nov 2008
revision)
49 IS 4763:2006 Manganese ore for production of ferromanganese
(second revision)
50 IS 5442:1992 Classification of haematite iron ore (second revision) Nov 2008
51 IS 5534:1969 Method for determination of specific surface area of Nov 2008
powder ore samples
52 IS 5842:1986 Method for measuring bulk density of iron oxides: lump Nov 2008 1
ores,sinter and pellets(first revision) (superseding IS
5483)
53 IS 5893:1989 Cryolite for use in aluminium industry for the aluminium Nov 2008
industry (first revision)
54 IS 5953:1985 Specification for bauxite for use in the production of Nov 2008
alumina for the aluminium industry (first revision)
55 IS 6495:1984 Method of tumbler test for iron oxides:lump ores,sinter Nov 2008
and pellets (first revision)
56 IS 6744(Part 1):1972 Methods of chemical analysis of ilemenite Oct 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
54
57 IS 7659(Part 1):1975 Reagents and standard solutions for use in chemical Oct 2006
analysis of metals, ores and minerals Part 1 volumetric
solution
58 IS 8167:1989 Method for determination of reducibility index of iron ore Aug 2005 1
oxides, lumps oore, sinter and pillets (first revision)
59 IS 8562:1977 Methods of sampling chrome ore Aug 2005
60 IS 8604:1977 Determination of compression strength of iron ore pellets Nov 2008
after reduction
61 IS 8624:1995 Method for determination of swelling index of iron ore Oct 2006
pellets (first revision)
62 IS 8625:1986 Determination of crushing strength of iron ore pellets Nov 2008 1
(first revision)
63 IS 9101:1979 Methods of sampling iron ore pellets Nov 2008
64 IS 9386:1979 Methods for chemical analysis of rock phosphate Oct 2006
65 IS 9592:1989 Aluminium trifluoride for use in aluminium industry (first Nov 2008 1
revision)
66 IS 9660:2001 Methods for determination of softening - melting Oct 2006
characteristics of iron ore lumps/pellets/sinter (first
revision)
67 IS 9959:1981 Guidelines for iron ore sinters for iron making in blast Nov 2008
furnace
68 IS 9963:1981 Determination of shatter index of iron ore lumps, sinter Nov 2008 1
and pellets
69 * IS 10085:2003 Methods for chemical analysis of zircon flour or sand Nov 2008
(first revision)
70 IS 10345:2004 Flux grade limestone for use in steel plants (second
revision)
71 IS 10346:2004 Flux grade dolomite for use in steel plants (second
revision)
72 IS 10816:1984 Methods of sampling zinc and lead concentrates Nov 2008
73 IS 10817:1984 Bauxite for refractory industry Nov 2008
74 IS 10818:1984 Chromite for metallurgical industry Nov 2008
75 IS 10819:1999 Chromite for refractory industry (first revision) Aug 2005
76 IS 10823:2006 Methods for determination of thermal degradation
index(TDI) and reduction degradation index(RDI) of iron
oxides:lump ore,sinter and pellets Section 1 Static
degradation test Section 2 Dynamic degradation test
(second revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
55
77 IS 11211:1984 Methods of sampling rock phosphate Nov 2008
78 IS 11281:2005 Manganese ore for use in iron and steel making (first Nov 2008
revision)
79 IS 11282:2000 Guidelines for laboratory pot-grate sintering test for iron Aug 2005
ore fines(first revision)
80 IS 11283:1985 Determination of softening point of iron oxides (in Nov 2008 1
powder form):lump ore,sinterand pellets
81 IS 11292:1985 Determination of relative reducibility of iron oxides:lump Nov 2008
ore,sinter and pellets
82 IS 11321:1985 Graphite for graphite crucibles Nov 2008
83 IS 11336:1985 Guidelines for heat hardened iron ore pellets for iron Nov 2008
making in blast furnaces
84 IS 11348:1989 Iron ore pellets - Apparent specific gravity, true specific Nov 2008
gravity and porosity - Method for determination apparent
(first revision)
85 IS 11373:1985 Guidelines for laboratory disc pelletisation test for iron Aug 2005
ore pellets
86 IS 11607:1986 Methods of sampling iron ore sinters Nov 2008
87 IS 11690:1986 Methods of moisture determination of iron ore lot Nov 2008
88 IS 11894:1986 Classification of magnetite iron ores, Nov 2008
89 IS 11895:1986 Classification of manganese ore, ferruginous manganese Nov 2008
ore, silicious manganese ore and magniferrous iron ore
90 IS 11896:1986 Determination of apparent specific gravity, true specific Nov 2008
gravity and apparent porosity of iron ore lump and sinter
91 IS 11897:1986 Guidelines for methods to be adopted for minerelogical Nov 2008
identification of iron oxides: lump ore, sinter and pellets
92 IS 12107(Part 1):1987 Methods of chemical analysis of alumino-silicate Oct 2006
refractory materials Part 1 Determination of loss on ignition
93 IS 12107(Part 2):1987 Part 2 Determination of silica Oct 2006
94 IS 12107(Part 3):1987 Part 3 Determination of aluminium Oct 2006
95 IS 12107(Part 4):1987 Part 4 Determination of phosphorus Oct 2006
96 IS 12107(Part 5):1987 Part 5 Determination of titanium Oct 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
56
97 IS 12107(Part 6):1987 Part 6 Determination of iron Oct 2006
98 IS 12107(Part 7):1987 Part 7 Determination of manganese Oct 2006
99 IS 12107(Part 8):1987 Part 8 Determination of calcium and magnesium Oct 2006
100 IS 12107(Part 9):1987 Part 9 Determination of sodium and potassium by flame Oct 2006
photometry
101 IS 12107(Part 10):2001 Part 10 Determination of iron, manganese, calcium and Oct 2006
magnesium by AAS method
102 IS 12394:1988 Method for Weathering test on iron ore sinter Nov 2008
103 IS 12550:1988 Methods of determining particle size distribution of iron Nov 2008 2
ore fines
104 * IS 12595:1989 Classification of terminology for exploration of mineral Mar 2003
deposits
105 IS 12596:1989 Manganese ore sinter for blending for ferromanganese Mar 2003
production
106 IS 12667(Part 1):1989 Methods of chemical analysis of chromite sand Part 1 Oct 2006
Determination of silica
107 IS 12667(Part 2):1989 Part 2 Determination of iron Oct 2006
108 IS 12667(Part 3):1989 Part 3 Determination of chromium Oct 2006
109 IS 12667(Part 4):1989 Part 4 Determination of calcium oxide Oct 2006
110 IS 12871:1989 Copper concentrates - Methods of sampling Aug 2005
111 * IS 13054:1991 Quartzite/quartz for the production of ferroalloys Nov 2008
112 IS 13344:1992 Method for checking the bias of sampling of ores Nov 2008
113 IS 13676:1993 Quartzite for iron making in blast furnace Nov 2008
114 IS 13751:1993 Tungsten for hard metal industry Nov 2008 1
115 IS 14296:1995 Dolomite for refractory industry Aug 2005
116 IS 14301:1995 Kyanite for refractory industry Aug 2005
117 IS 14302:1995 Beach sand silimanite for refractory industry Aug 2005
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
57
118 IS 14303:1995 Magnesite for refractory industry Aug 2005
119 IS 14713:1999 Synthetic Alumina & Mulite grains for refractory industry Aug 2005
120 IS 14852:2000 Graphite for refractory industry Aug 2005
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 13(4667) Metods of sampling of iron ores (second revision of IS
1405)
2 DOC.MTD 13(4668) Methods of sampling of manganese ore (first revision of
IS 1449:1976)
3 DOC.MTD 13(4972) Copper, lead, zinc and nickel concentrates - Sampling
/ ISO 12743:2006 procedure for determination of metal and moisture content
4 DOC.MTD 13(4993) Iron ores - Experimental methods for checking the bias of
Sampling
PRODUCT 14
METHODS OF TEST 60
OTHERS 46
TOTAL : 120
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
58
MTD 14 FOUNDRY AND STEEL CASTING SECTIONAL COMMITTEE
SCOPE -Standardization in the field of foundry materials, foundry practice and steel
castings
LIAISON
ISO/TC 17/SC 11 Steel castings
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 276:2000 Austenitic manganese steel castings (fifth revision) Mar 2005
2 IS 1030:1998 Carbon steel castings for general engineering Feb 2004
purposes(fifth revision)
3 IS 1280:1975 Foundry moulding boxes of steel construction (second Dec 2008 1
revision)
4 IS 1305:1984 Graphite for use in foundry coatings (third revision) Mar 2005 2
5 IS 1513:1980 Wooden Pattern equipment for foundries (second Dec 2008 2
revision)
6 IS 1752:1973 Coal dust for use in cast iron foundry (second revision) Mar 2005
7 IS 1811:1984 Methods of sampling foundry sands (first revision) Mar 2005
8 * IS 1918:1966 Methods of physical tests for foundry sands Dec 2008
9 IS 1987:2002 High silica sand for use in foundry (second revision) Dec 2007
10 IS 2644:1994 High tensile steel castings (fourth revision) Mar 2005
11 IS 2707:1996 Carbon steel castings for surface hardening (fourth Dec 2007 1
revision)
12 IS 2708:1993 1.5 Percent manganese steel castings for general Feb 2004
engineerig purposes (third revision)
13 IS 2763:1999 Glossary of terms relating to foundry technology Dec 2008
14 IS 2856:1999 Carbon steel castings for pressure containing parts Feb 2004
suitable for fusion welding (fourth revision)
15 IS 2985:1990 Steel castings for ships structure (third revision) Mar 2005
16 IS 2986:1990 Steel castings for marine engines and boilers (second Mar 2005 1
revision)
17 IS 3018:1977 Standard silica sand for raw material testing in foundries Dec 2008
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
59
18 IS 3038:2006 Martensitic Stainless Steel and Alloy Steel Castings For
Pressure Containing Parts Suitable For High Temperature
Service(fourth Revision)
19 IS 3339:1975 Silica flour for use in foundries (first revision) Dec 2008
20 IS 3343:1965 Natural moulding sand for use in foundries Dec 2008
21 IS 3444:1999 Corrosion resistant alloy steel and nickel base castings Feb 2004
for general applicatis (third revision)
22 IS 4269:1981 Dextrin for use in foundries (first revision) Dec 2008
23 IS 4475(Part 1):1986 Crane-suspended ladles for foundries Part 1 Dec 2008
Straight/taper sided geared ladles 0.25 to 10 tonnes for
iron and steel foundries (second revision)
24 IS 4475(Part 2):1986 Cylindrical geared ladles 0.25 to 3.0 tonnes for iron Dec 2008
foundries (second revision)
25 IS 4475(Part 3):1989 Part 3 Straight/taper sided ladles 0.25 to 3.0 tonnes Dec 2008
capacities for S.G. Iron foundries (second revision)
26 IS 4475(Part 4):1988 Part 4 Taper sided non geared ladles 15 to 50 tonnes Dec 2008
capacities for iron and steel foundries
27 IS 4491:1994 Steel castings for high magnetic permeability (third Feb 2004
revision)
28 IS 4522:1986 Heat resistant alloy steel and nickel base castings Mar 2005
(second revision)
29 IS 4604:1975 Pattern plates for machine moulding boxes (first revision) Dec 2008
30 IS 4606:1983 Steel shots for use in foundries (first revision) Dec 2008 1
31 IS 4683:1968 Chilled iron shot and grit for use in foundries Dec 2008
32 IS 4843:1968 Code for designation of ferrous castings Jul 2003
33 IS 4896:1992 One percent chromium steel castings for resistance to Dec 2007
abrasion (second revision)
34 IS 4897:1994 Deviations on untoleranced dimensions and mass of Feb 2004
steel castings (third revision)
35 IS 4898:1989 Steel castings for case carburizing (second revision) Feb 2004 1
36 IS 4899:2006 Ferritic and martensitic steel casting for use at low
temperature (third rev ision)
37 IS 4981:1984 Guide pins for foundry pattern plates (second revision) Dec 2008 1
38 IS 4982:1984 Closing pins for foundry moulding boxes (second Dec 2008 1
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
60
39 IS 5032:1983 Recommended sizes of cupola furnace for foundry Mar 2005
(second revision)
40 * IS 5303:1974 Zircon flour for use in foundries (first revision) Dec 2008
41 IS 5824:1970 Lancets for use in foundries Dec 2008
42 IS 5841:1970 Flutted core cleaners for use in foundries Dec 2008
43 IS 5850:1970 Star (triangular) cutters for use in foundries Dec 2008
44 IS 5873:1970 Steel cut-wire shots for use in foundries Dec 2008
45 IS 5904:1978 Steel chaplets for use in ferrous foundries (first revision) Dec 2008
46 IS 5981:1986 Sleekers for use in foundries (first revision) Dec 2008
47 IS 5988:1970 Spring dowel sleeves (light and heavy patterns) for use Dec 2008
in foundries
48 IS 6013:1970 Trowels for use in foundries Mar 2005
49 IS 6079:1989 Low alloy cast steel grinding media (second revision) Feb 2004 1
50 IS 6366:1971 Sprue plugs for use in foundries Mar 2005
51 IS 6376:1986 Pattern lifting pins and hooks for use in foundries (first Dec 2008
revision)
52 IS 6377:1971 Mellets for use in foundries Dec 2008
53 IS 6378:1986 Pattern lifting and rapping plates (first revision) Dec 2008
54 IS 6401:1986 Dowel pins for use in foundries (first revision) Dec 2008
55 IS 6443:1971 Lifters and cleaners for use in foundries Jul 2006
56 IS 6447:1986 Vent wires for use in foundries (first revision) Dec 2008
57 IS 6482:1971 Tempers and rammers for use in foundries Mar 2005
58 IS 6601:1987 Permissible deviations in chemical composition for Feb 2004 1
products analysis of steelcastings (first revision)
59 * IS 6773:2008 Sodium silicate for use in foundries (second revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
61
60 IS 6788:1973 Chromite sand for use in foundries Dec 2008
61 IS 6907:1992 Steel castings - Method of sampling (first revision) Dec 2007
62 IS 7295:1974 Chamotte Dec 2008
63 IS 7297:1974 Olivine sand and flour for use in steel foundries Dec 2008
64 IS 7547:1987 Steel Nails used as internal chills in steel castings (first Dec 2008
revision)
65 IS 7806:1993 Martensitic and austenitic high alloy steel castings for Feb 2004
high temperature service (second revision)
66 IS 7899:2006 Alloy steel castings suitable for pressure services (third
revision)
67 IS 8092:1992 Code for inspection of surface quality of steel castings Dec 2007
for valves, fittings and other piping components (visual
method) (first revision)
68 IS 8228:1976 Bauxite sand Dec 2008
69 IS 8246:1976 Liquid resins for use in shell process in foundries Dec 2008
70 IS 8250:1988 Foundry parting agents (first revision) Dec 2008
71 IS 8779:1978 Core gums (sodium silicate based) for use in foundries Dec 2008
72 * IS 8785:1978 Carbon dioxide core binder system (binder and Dec 2008
breakdown agent) for use in foundries
73 IS 8800:1997 Technical delivery conditions for steel castings Dec 2007 1
(excluding investment casting) (third revision)
74 IS 8939:1978 Code of practice for use of oxygen in Iron Steel,and Dec 2008
non-ferrous metal foundries
75 IS 8988:1978 Bauxite powder for foundry washes Dec 2008
76 IS 9007:1978 Zircon sand for use in foundries Dec 2008
77 IS 9008:1978 Core repairing paste for use in foundries Dec 2008
78 IS 9009:1992 Foundry core oils (first revision) Jul 2006
79 IS 9139:1979 Malleable iron shots and grits for use in foundries Dec 2008 1
80 IS 9541:1987 Cast CTC segments (first revision) Dec 2007
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
62
81 IS 9565:1995 Acceptance standards for ultrasonic inspection of steel Mar 2005
castings(second revision)
82 IS 9661:1980 Hand shank ladles Dec 2008
83 IS 9674:1980 Test Methods for fluid self hardening sand Dec 2008 1
84 * IS 10032:1981 Organic no bake binders for use in foundries Dec 2008
85 IS 10033:1991 Zircon and Graphite based core and mould washes Dec 2008
(First Revision)
86 IS 10034:1981 Basic requirement for equipment for determining moistureDec 2008
content in foundry sand
87 IS 10091:1981 Iron oxide powder for use in foundries Dec 2008
88 IS 10094:1998 Code of practice for pattern making by using expanded Feb 2004
polystyrene material (first revision)
89 IS 10214:1982 Methods of sampling bentonite Dec 2008
90 IS 10343:1999 Carbon and low alloy steel investment castings for Feb 2004
general applications (first revision)
91 IS 10469:1983 Antipiping compound for foundry Mar 2005
92 IS 10487:1983 Sand rammer Mar 2005
93 IS 10498:1983 Apparatus for determining permeability of foundry sand Dec 2008
94 IS 10504:1983 Exothermic feeding aid for foundry Mar 2005
95 IS 10518:1983 Snap flask moulding boxes and jackets Dec 2008
96 IS 10724:1990 Acceptancce standard for magnetic particle testing of Mar 2005
steel casting (first revision)
97 IS 10774:1993 Specification for corrosion resistant high alloy and nickel Feb 2004 1
base investment castings for general applications (first
revision)
98 IS 10979:1984 Powder resins for use in shell process in foundries Dec 2008
99 IS 11099:1984 Universal sand testing machines Mar 2005 1
100 IS 11166:1993 Permissible deviations on dimensions, surface Feb 2004
roughness and mass of steel castings made with
investment casting process (first revision)
101 IS 11266:1985 Flake resins for use in shell process in foundries Dec 2008
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
63
102 IS 11286:1995 Corrosion resistant high alloy steel nickel base and Mar 2005 1
Cobalt base investment castings for severe applications
103 IS 11709:2007 Technical delivery conditions for investment castings of
steel (second revision)
104 IS 11732:1995 Acceptance standards for dye penetrant inspection of Mar 2005
steel castings (first revision)
105 IS 11758:1994 Precipitation hardening stainless steel castings (first Mar 2005 1
revision)
106 IS 12006:1987 Metal pattern and epoxy resin pattern equipment for Dec 2008
foundries
107 IS 12117:1996 Norms for classification of steel foundries for quality Dec 2007
assurance (first revision)
108 IS 12272:1987 Divided blast cupola furnace Feb 2003
109 IS 12424:1988 Hot box resin for use in foundries Dec 2008
110 IS 12446:2007 Bentonite for use in foundries(first revision)
111 IS 12799:1989 Recommended practice for impregnation of castings Mar 2005
112 IS 12880:1989 Guidelines for controlling foundry rejection Mar 2005
113 IS 12938:1990 Acceptance standards for radiographic inspection of Mar 2005
steel castings
114 IS 12968:1991 Steel castings for crankshafts for marine engines Dec 2007
115 IS 13100:1991 Pitch powder for use in cast iron foundry Dec 2008
116 IS 13126:1991 Silicon carbide chills Dec 2008
117** IS 13505:1992 Centrifugally cast high alloy steel and nickel base tubing Dec 2007
for pressure application at high temperature
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 14(4603) Extheromic and insulating sleeves for use in foundries
PRODUCT 91
METHODS OF TEST 2
CODE OF PRACTICES 7
TERMINOLOGY 1
DIMENSION 1
OTHERS 15
TOTAL : 117
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
64
MTD 15 REFRACTORIES SECTIONAL COMMITTEE
SCOPE - Standardization in the field of refractories
LIAISON
ISO/TC 33 Refractories
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 * SP 37 : 1987 Handbook for refractories Part 3 Cement Kiln Systems Nov 2007
2 IS 8:1994 High heat duty fireclay refractories (fifth revision) Aug 2006
3 IS 195:2005 Fireclay mortar for laying fireclay refractory bricks
(third revision)
4 IS 483:1972 Fireclay refractories for oil-fired boiler furnaces of naval Nov 2007
ships (first revision)
5 IS 484:1980 Silica refractories for general purposes (second revision) Nov 2007
6 IS 1292:1991 Silica mortar for laying silica bricks in furnaces (first Nov 2007
revision)
7 IS 1522:1998 Fireclay glass tank blocks (second revision) Nov 2007
8 IS 1523:1972 Bottom pouring refractories for steel plants (first Nov 2007
revision)
9 IS 1524:1968 Refractory sleeves (first revision) Nov 2007
10 IS 1525:1968 Ladle refractories for steel plants (first revision) Nov 2007
11 IS 1526:1960 Sizes and shapes for firebricks Nov 2007 1
12 ** IS 1528(Part 1):1980 Methods of sampling and physical tests for refractory Feb 2009
materials Part 1 Determination of pyrometric cone
equivalent (PCE) or softening point (second revision)
13 ** IS 1528(Part 2):1974 Determination of refractoriness under load (first revision) Feb 2009
14 ** IS 1528(Part 3):1983 Determination of spalling resistance (second revision) Feb 2009
15 ** IS 1528(Part 4):1974 Determination of cold crushing strength (first revision) Feb 2009 1
16 IS 1528(Part 5):2007 Methods of sampling and physical tests for refractory
/ ISO 5014:1997 materials Part 5 Method for determination of modulus of
rupture at ambient temperature of dense and insulating
shaped refractory products (third revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
1
65
17 ** IS 1528(Part 6):1974 Determination of permanent change after reheating (first Nov 2007
revision)
18 ** IS 1528(Part 7):1974 Method of sampling and criteria for conformity (first Feb 2009
revision)
19 ** IS 1528(Part 8):1974 Determination of apparent porosity (first revision) Feb 2009 1
20 IS 1528(Part 9):2007 Part 9 Determination of true density (fourth revision)
/ ISO 5018:1983
21 ** IS 1528(Part 10):1974 Determination of size of refractory bricks (first revision) Feb 2009
22 IS 1528(Part 11):1993 Determination of wrapage (second revision) Sep 2004
23 IS 1528(Part 12):2007 Part 12 Method for determination of bulk density and true
/ ISO 5016:1997 porosity of shaped insulating refractory products
(second revision)
24 IS 1528(Part 13):2007 Part 13 Determination of resistance to carbon monoxide
/ ISO 12676:2000 (second revision)
25 ** IS 1528(Part 14):1974 Sieve analysis (first revision) Feb 2009
26 IS 1528(Part 15):2007 Part 15 Method for determination of bulk density,
/ ISO 5017:1998 apparent porosity and true porosity of dense shaped
refractory products (first revision)
27 IS 1528(Part 16):2007 Part 16 Determination of thermal conductivity according
/ ISO 8894-2:1990 to hot-wire method (parallel)
28 IS 1528(Part 17):1993 Determination of cold crushing strength of shaped Sep 2004
/ ISO 8895:1986 insulating refractory products
29 IS 1528(Part 18):1993 Determination of creep in compression Sep 2004
/ ISO 3187:1989
30 ** IS 1528(Part 19):1991 Determination of thermal expansion Feb 2009
31 IS 1528(Part 20):1993 Determination of modulus of rupture at elevated Sep 2004
/ ISO 5013:1985 temperature
32 IS 1528(Part 21):2007 Part 21 Determination of thermal conductivity according
/ ISO 8894-1:1987 to hot-wire method (cross-assay)
33 IS 1528(Part 22):2007 Part 22 Method for Determination of permeability to gases
/ ISO 8841:1991 of dense shaped refractory products
34 IS 1529:1971 Blast furnace refractories for steel plants (first revision) Nov 2007 1
35 IS 1748:1981 Sizes of graphite crucibles (first revision) Nov 2007
36 IS 1749:2005 Burnt magnesite refractories - Specification (third Nov 2007
revision)
37 IS 1750:1995 Dead burnt pea magnesite (third revision) Aug 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
66
38 IS 1751:1984 Fireclay cupola refrectories (second revision) Nov 2007
39 IS 2042:2006 Insulating bricks - Specification (second revision) Feb 2002 1
40 IS 2043:1984 Siliceous fireclay refreatories (first revision) Nov 2007
41 IS 2044:2005 Silimanite refractories for glass melting tank furnaces
(second revision)
42 IS 3304:2005 Specification for Burnt magnesite-chrome refractories Nov 2007
for general purposes (first revision)
43 IS 3305:2005 Specification for Burnt chrome-magnesite refractories Nov 2007
for general purposes(first revision)
44 IS 4041:2006 Glossary of terms relating to refractory materials (first
/ ISO 836:2001 revision)
45 IS 4564:1968 Fireclay nozzles Nov 2007
46 IS 4565:1968 Fireclay stoppers Nov 2007
47 IS 4801:1980 Chemically-bonded magnesite-chrome refractories for Nov 2007
roof lining (first revision)
48 IS 4812:1996 Silica refractories for coke oven (second revision) Aug 2006
49 IS 4813:1980 Chemically-bonded chrome-magnesite refractories for Nov 2007
general purposes (first revision)
50 IS 4814:1980 Chemically-bonded magnesite-chrome refractories for Nov 2007
general purposes (first revision)
51 IS 5495:1969 Sizes and shapes for firebricks (300 mm and higher Nov 2007 1
sizes)
52 IS 6727:1972 Fireclay checker bricks for open hearth furnace Nov 2007
53 IS 6728:1972 Recuperator tubes, tiles and collars for soaking pits in Nov 2007
steel plants
54 IS 7199:2008 Blast furnace stove refractories Nov 2007
55 IS 8953:2006 Specificaiton for 62 percent alumina bricks and blocks Nov 2007
for blast furnaces (first revision)
56 IS 8966:1978 Megnesite nozzles Nov 2007
57 IS 8977:1978 Clay bonded graphite crucibles Nov 2007
58 IS 9010:1978 Super heat duty fireclay refractories Nov 2007
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
67
59 IS 9929:1981 Method of determining life of graphite crucibles Nov 2007
60 IS 9930:2005 Zircon refractories for glass furnace application (first
revision)
61 ** IS 10047:1981 Methods for testing refractory ramming masses Feb 2009
62 IS 10551:2005 Zircon mullite refractories for glass furnace
applications (first revision)
63 ** IS 10570:1983 Methods for testing refractory castables Feb 2009
64 IS 10607:1983 Refractories for cement rotary kilns Nov 2007
65 IS 11036:1984 Graphite stopper heads Nov 2007
66 ** IS 11452:1985 Method of testing air-setting refractory mortars Feb 2009
67 IS 12847:1997 Carbon bonded silicon carbide crucibles (first revision) Nov 2007
68 IS 12893:2006 Pyrometric reference cones for laboratory use of Nov 2007
/ ISO 1146:1988 specification (first revision)
69 IS 12951:2006 Specification for mica Insulation Bricks for High Nov 2007
temperature application (first revision)
70 IS 13150:1991 Silica mortars for laying silica bricks in coke ovens Nov 2007
71 IS 13173:1991 Code of practice for handling and usage of graphite and Nov 2007
silicon carbide crucibles
72 IS 13185:1991 Method of test for determination of drying shrinkage of Nov 2007
refractory mortars
73 IS 14313:1995 70 Percent alumina bricks - specification Aug 2006
74 IS 14374:1996 Refractories for chimney - Recommendation Aug 2006
75 IS 14406:1996 Refractories for forge and heat treatment furnaces _ Aug 2006
Recommendations
76 IS 14447:1997 Refractories for use in foundry industry - Nov 2007
Recommendations
77 IS 15507:2004 Basic insulating coating material for application in tundish
at steel plants - Specification
78 IS 15508:2004 Refractory mass (Basic Gunning) for Steel Plant
Application - Specification
79 IS 15541:2005 Specification for low cement and ultra low cement
castable for general purposes
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
68
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 15(4842) Method of sampling and physical tests for refractory
materials Pt 1 Determination of pyrometric cone
equivalent (PCE) or softening poing (first revision of IS
1528(Pt 1)
2 DOC.MTD 15(4843) Part 2 Determination of refractoriness under load
(second revision of IS 1528(Pt 2)
3 DOC.MTD 15(4844) Part 3 Determination of spaling resistance (second
revision of IS 1528(Pt 3)
4 DOC.MTD 15(4845) Determination of cold crushing strength of dense shaped
refractory products (second revision of IS 1528(Pt 4)
5 DOC.MTD 15(4846) Part 6 Determination of permanent linear change after
reheating for shaped insulating & dense refractories
(second revision)
6 DOC.MTD 15(4847) Method of sampling and criteria for conformity (second
revision of IS 1528(Part 7)
7 DOC.MTD 15(4848) Method of testing refractory castables
8 DOC.MTD 15(4857) Specification for high alumina refractory cement
9 DOC.MTD 15(4861) Method of test for dense shaped refractory product -
Part 23 Determination of resistance to abrasion at
ambient temperature
PRODUCT 35
METHODS OF TEST 23
CODE OF PRACTICES 2
TERMINOLOGY 1
DIMENSION 3
OTHERS 15
TOTAL : 79
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
69
MTD 16 ALLOY STEELS AND FORGING SECTIONAL COMMITTEE
SCOPE - Standardization in the field of alloy & special steels and forging
including/chemcal/instrumental analysis, classification designaiton and coding
of related steels MTD 4, ISO/TC 17 Steel, SC 4 and SC &
LIAISON
MTD 1 and 4, ISO/TC 17 Steel
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 228(Part 5):1987 Part 5 Determination of nickel by dimethyl glyoxime May 2009
(gravimetric) method (for nickel greater than or equal to
0.1 percent (third revision)
2 IS 228(Part 6):1987 Part 6 Determination of chromium by persulphate May 2009
oxidation method (for chromium greater than or equal to
0.1 percent) (third revision)
3 IS 228(Part 7):1990 Part 7 Determination of molybdenum by alpha- May 2006
benzoinoxime method (for molybdenum greater than 1
percent) (third revision)
4 IS 228(Part 10):1989 Part 10 Determination of molybdenum by thiocynate May 2009
(photometric) method in low and high alloy steels (for
molybdenum 0.01 to 1.5 percent) (third revision)
5 IS 228(Part 11):1990 Part 11 Determination of total silicon by reduced May 2009
molybdosilicate spectro photometric method in carbon
steels and low alloy steels (for silicon 0.01 to 0.05
percent) (third revision)
6 IS 228(Part 12):2001 Part 12 Determination of manganese by periodate May 2009
spectrophotometric method in low and high alloy steels
(for manganese 0.01 to 2.0 percent) (fourth revision)
7 IS 228(Part 13):1982 Part 13 Determination of arsenic May 2009
8 IS 228(Part 15):1992 Part 15 Determination of copper by thiosulphate iodide May 2009
method (for copper 0.05to 5 percent)
9 IS 228(Part 16):1992 Part 16 Determination of tungsten by spectrophotometric May 2009
method (for tungsten 0.1 to 2 percent)
10 IS 228(Part 18):1998 Part 18 Determination of oxygen by instrumental method May 2006
11 IS 963:1958 Chrome molybdenum steel bars and rods for aircraft May 2009 2
purposes
12 IS 1570(Part 1):1978 Schedules for wrought steels Part 1 Steels specified by Jun 2004 1
tensile and/or yield properties (first revision)
13 IS 1570(Part 2/Sec 1):1979 Schedules for wrought steels Part 2 Carbon steels May 2006
(unalloyed steels) Section I Wrought products (other than
wire) with specified chemical composition and related
properties (first revision)
14 IS 1570(Part 2/Sec 2):1988 Schedules for wrought steels Part 2 Carbon steels May 2009
(unalloyed steels) Section IICarbon steel wires with
related properties (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
1
70
15 IS 1570(Part 3):1979 Schedules for wrought steels Part 3 Carbon and carbon May 2009
manganese free cutting steels (first revision)
16 IS 1570(Part 4):1988 Schedules for wrought steels Part 4 Alloy steels (Alloy May 2006
constructional and spring steels) with specified chemical
composition andd mechanical properties(firstrevision)
17 IS 1570(Part 5):1985 Schedules for wrought steels Part 5 Stainless and heat May 2009
resisting steels (secondrevision)
18 IS 1570(Part 6):1996 Schedules for wrought steels Pt 6 Carbon and alloy tool May 2006
steels (first revision)
19 IS 1570(Part 7):1992 Schedule for wrought steels Part 7 Steels for elevated May 2009
temperature service (creep resistant steels)
20 IS 1870:1965 Comparison of Indian and overseas standards for May 2009
wrought steels for general engineering purposes
21 IS 1871:1965 Commentary on Indian Standard schedules for wrought May 2006
steels for general engineering purposes
22 IS 1871(Part 1):1987 Commentary on Indian Standard Schedules for wrought May 2009
steels Part 1 Steels specified by Tensile and/or yield
properties (Complementary to IS 1570(Part 1):1978) (first
revision)
23 IS 1871(Part 2):1987 Commentary on Indin Standard Schedules for wrought May 2009
steels Part 2 Carbon steels (unalloyed steels)
(Complementary to IS 1570 Part 2):1979) (first revision)
24 IS 1871(Part 3):1987 Commentary on Indian Standard Schedules for woruhgt May 2009
steels Part 3 Carbon and carbon-manganese free cutting
steels_(complementary to IS 1570(part
3):1979)(firstrevision)
25 IS 1875:1992 Carbon steel billets, blooms, slabs and bars for forgings May 2009 2
(fifth revision)
26 IS 1956(Part 6):1976 Forging (including drop forging) May 2006 2
27 IS 2004:1991 Carbon steel forgings for general engineering purposes May 2006
(third revision)
28 IS 2611:1964 Carbon chromium molybdenum steel forgings for high May 2006
temperature services
29 IS 3261:1980 Carbon steel forgings for shipbuilding industry (first May 2006
revision)
30 IS 3445:1992 Forged steel rolls (First Revision) May 2009
31 IS 3469(Part 1-3):1974 Tolerances for closed die steel forgings (first revision) May 2006
32 IS 3479:1966 General requirements for steel drop, upset and press May 2006
forgings
33 IS 3739:1987 Dimensional tolerances for carbon and alloy May 2006
constructional steel products (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
71
34 *IS 3748:1990 Tool and die steels (second revision) (Superseding IS May 2006
3749)
35 * IS 3930:1994 Flame and induction hardening steels (second revision) May 2009
36 IS 4367:1991 Alloy steel forgings for general industrial use (first May 2009 1
revision)
37 IS 4368:1967 Alloy steel billets, blooms and slabs for forging for May 2009 1
general engineering purposes
38 IS 4397:1999 Cold rolled carbon steel strip for ball and roller bearing May 2009 1
cages (first revision)
39 * IS 4398:1994 Carbon chromium steel for the manufacture of May 2009
ball ,rollers and bearing races (second revision)
40 IS 4430:1979 Mould steels (first revision) May 2009 2
41 * IS 4431:1978 Carbon and carbon manganese free cutting steels (first May 2009 2
revision)
42 * IS 4432:1988 Case hardening steels(first revision) May 2009
43 IS 4882:1979 Low carbon steel wire for rivets for use in bearing May 2009 2
industry (first revision)
44 IS 5489:1975 Carburizing steels for use in bearing industry (first May 2009 2
revision)
45 * IS 5517:1993 Steels for hardening and tempering (second revision) May 2009
46 IS 5518:1996 Steels for die blocks for drop forging (second revision) May 2006
47 IS 5522:1992 Stainless steel sheets and strips for utensils (second May 2009
revision)
48 IS 5651:1987 Steels for pneumatic tools (first revision) Jan 2000 2
49 IS 6527:1995 Stainless steel wire rod (first revision) 50 1990
50 IS 6528:1995 Stainless steel wire (first revision) May 2006
51 IS 6529:1996 Stainless steel blooms, billets and slabs for forging (first May 2006
revision)
52 IS 6603:2001 Stainless steel bars and flats (first revision) May 2009
53 IS 6911:1992 Stainless steel plate, sheet and strip (first revision) May 2009 1
54 * IS 7291:1981 High speed tool steels (first revision) May 2009
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
3
72
55 * IS 7494:1981 Steel for valves for internal combustion engines (first May 2009
revision)
56 IS 8748:1978 Forged/rolled CTC segments May 2006 1
57 IS 8811:1998 Method for spectrographic analysis of plain Carbon and May 2006
low alloy Steels by the point to plane spark technique
(first revision)
58 IS 9100:1979 Methods of sampling steel forgings May 2006
59 IS 9175(Part 1):1979 Rationalized steels for the automobile and ancillary May 2009
industry, Part I chemical composition
60 IS 9175(Part 2):1985 Rationalized steels for the automobile mechanical and May 2009
physical properties Part 2 15C8 Grade steel
61 IS 9175(Part 3):1985 25C8 Grade Steel May 2009
62 IS 9175(Part 4):1985 30C8 Grade Steel May 2009
63 IS 9175(Part 5):1985 35C8 Grade Steel May 2009
64 IS 9175(Part 6):1986 40C8 Grade Steel May 2009
65 IS 9175(Part 7):1986 45C8 Grade steel May 2009
66 IS 9175(Part 8):1985 55C8 Grade steel May 2009
67 IS 9175(Part 9):1985 11C10S25 Grade steel May 2009
68 IS 9175(Part 10):1985 14C14S14 Grade steel May 2009
69 IS 9175(Part 11):1985 25C12S14 Grade steel May 2009
70 IS 9175(Part 12):1988 35C16Mo35Si5 Grade steel May 2009
71 IS 9175(Part 13):1987 40C15S12 Grade steel May 2009
72 IS 9175(Part 15):1987 37C15 Grade steel May 2009
73 IS 9175(Part 16):1987 35Mn6Mo3 Grade steel May 2009
74 IS 9175(Part 17):1987 35Mn6Mo4 Grade steel May 2009
75 IS 9175(Part 18):1987 15Cr3 Grade steel Jun 2004
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
73
76 IS 9175(Part 19):1986 46Mn5Cr4 Grade steel May 2009
77 IS 9175(Part 20):1986 20MnCr5 Grade steel May 2009
78 IS 9175(Part 21):1987 40Cr4 Grade steel May 2009
79 IS 9175(Part 22):1987 40Cr4Mo3 Grade steel May 2009
80 IS 9175(Part 23):1987 25Cr13Mo6 Grade steel May 2009
81 IS 9175(Part 24):1987 35NiSCr2 Grade steel May 2009
82 IS 9175(Part 25):1987 15Ni5Cr4Mol Grade steel May 2009
83 IS 9175(Part 26):1986 16Ni3Cr2 Grade steel May 2009
84 IS 9175(Part 27):1987 15Ni7Cr4Mo2 Grade steel May 2009
85 IS 9175(Part 28):1987 40Ni6Cr4Mo3 Grade steel May 2009
86 IS 9175(Part 29):1987 40Ni10Cr3Mo6 Grade steel May 2009
87 IS 9175(Part 30):1987 20Ni7CrMo2 Grade steel May 2009
88 IS 9175(Part 31):1987 20Ni7Mo2 Grade steel May 2009
89 IS 9175(Part 32):1987 20NiCrMo2 Grade steel May 2009
90 IS 9175(Part 33):1988 42Cr6V10 Grade steel May 2009
91 IS 9175(Part 34):1986 14CrNi6 Grade steel May 2009
92 IS 9294:1979 Cold rolled stainless steel strips for razor blades May 2009 2
93 IS 9516:1980 Heat resisting steel May 2009 1
94 IS 9683:1980 Carbon and low alloy steel forgings for fired and unfired May 2006
pressure vessels
95 IS 9684:1980 Technical conditions for the supply of hot rolled billets May 2006
blooms, slabs and bars for closed die forgings
96 IS 9879:1998 Method for spectrographic analysis of austenitic and
ferritic Stainless steels by the point to plane technique
(first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
74
97 IS 10604(Part 1):1983 Machining allowances and tolerances for open die steel May 2006
forgings Part 1 carbon and low alloy steel forgings
98 IS 10604(Part 2):1983 Machining allowances and tolerances for open die steel May 2006
forgings Part 2 High alloy steel forgings
99 IS 10631:1983 Stainless steel for welding electrode core wire May 2009
100 IS 10632(Part 1):1983 Non Magnetic stainless steels for electrical applications May 2009
Part 1 General requirements
101 IS 10632(Part 2):1983 Specific requirements for binding wire May 2009
102 IS 10632(Part 3):1983 Specific requirements for sheets, strips and plates for May 2009
electrical appliances
103 * IS 11169(Part 1):1984 Steels for cold heading/cold extrusion application Part 1 May 2009
Wrought carbon and low alloy steels
104 IS 11169(Part 2):1988 Steels forcold heading/cold extrusion Part 2 Stainless May 2009
steel
105 IS 11185:1984 Technical supply conditions for hot rolled and forged May 2009 1
steel bars for use in machine tool industry
106 IS 11946:1987 Soft magnetic iron strips May 2006
107 IS 11947:1987 Soft magnetic iron rods, bars, flats and sections May 2006
108 IS 11952:1986 Steels for piston pins (Gudgeon pins) May 2009
109 IS 12045:1987 Alloys used in electrical resistance metallic heating May 2006
elements
110 IS 12145:1987 Quenched and tempered alloy steel forgings for Mar 2001
pressure vessels
111 IS 12146:1987 Carbon manganese steel forgings for pressure vessels May 2006
112 IS 12390:1988 Iron nickel alloy 36 for ceramic sealing May 2009
113 IS 12391:1988 Iron nickel controlled expansion sealing alloys May 2009
114 IS 12549:1988 Iron nickel cobalt sealing alloys May 2009
115 IS 12658:1989 Grinding media rolled/forged carbon and carbon- May 2006
chromium steels
116 IS 12836:1989 36-Nickel iron soft magnetic rods May 2009
117 IS 12881:1990 36-Nickel iron soft magnetic striips May 2009
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
75
118 IS 12882:1990 48-Nickel iron soft magnetic strip May 2009
119 IS 13352:1992 Stock for forgings produced f rom continuously bast May 2009
billets , blooms, slabs andbars - specification
120 IS 13387:1992 Tool steel forgings for metal forming May 2009 1
121 IS 13795(Part 1):1993 Glossary of terms for special alloys Part 1 Soft magnetic May 2009
marterials
122 IS 14331:1995 Steels for high temperature bolting applications May 2006
123 IS 14652:1999 18% Nickel maraging steel bars & rods May 2006
124 IS 14698:1999 Carbon and low alloy billets, blooms and slabs for May 2006
manufacture of shell bodies af shots used in defence
services - Specification
DRAFT STANDARD COMPLETED WIDE CIRCULATION
1 DOC.MTD 16(4925) Low nickel austenitic stainless steel sheet & strip for
utensils and kitchen appliances - Specification
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.MTD 16(5021) Specification for carbon and carbon manganese free
/ 683-9 cutting steel (second revision of IS 4431 by adopting ISO
683-9)
2 DOC.MTD 16(5019) Specification for case hardening steel (second revision
/ 683-11 of IS 4432 by adopting ISO 683-11)
3 DOC.MTD 16(5020) Specification for steels for valves for internal combustion
/ 683-15 enginees (second revision of IS 749 by adopting
ISO683-15)
4 DOC.MTD 16(5022) Steels for hardening and tempering-specification (third
/ 683-1 revision of IS 5517 by adopting ISO 683-1)
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION
1 IS 11169(Part 1):1984 Steels for cold heading/cold extrusion application Part 1 -
/ 4954 Wrought carbon and low alloy steels
2 IS 3748:1990 Tool and die steels (second revision) (Superseding IS
/ 4957 3749)
3 IS 3930:1994 Flame and induction hardening steels (second revision)
/ 17212
4 IS 4398:1984 Carbon chromium steel for te manufcture of ball, rollers
/ 683-17 and bearing races (second revision)
5 IS 4431:1978 Carbon and carbon manganese free cutting steels
/ 683-9 (first revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
76
6 IS 4432:1998 Case hardening steels (first revision)
/ 683-II
7 IS 5517:1993 Steel for hardening and tempering ( second revision)
/ 683-1
8 IS 7494:1981 Steel for valves for internal combustion engines
/ 683-15 (first revision)
PRODUCT 79
METHODS OF TEST 9
CODE OF PRACTICES 1
TERMINOLOGY 2
DIMENSION 5
OTHERS 28
TOTAL : 124
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
77
MTD 19 STEEL TUBES, PIPES AND FITTINGS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of steel tubes, pipes and fittings including
classification, designation and coding of steel tubes
LIAISON
ISO/TC 5 Ferrous metal pipes and metallic fittings
ISO/TC 17 Steel
ISO/TC 67/SC 2 Pipeline transportation system
ISO/TC 67/SC 5 Casing, tubing and drilling pipe
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1161:1998 Steel tubes for structural purposes (fourth revision) Mar 2009 3
2 IS 1239(Part 1):2004 Steel Tubes, tubulars and other wrought steel fittings - Feb 2010 3
Specification (Part 1) Steel tubes (Sixth revision)
3 IS 1239(Part 2):1992 Mild steel tubes, tubulars and other wrought steel fittings, Mar 2009 6
Part 2 Mild steeltubulars and other wrought steel pipe
fittings (fourth revision)
4 IS 1956(Part 8):1976 Glossary of terms relating to iron and steel - Part 8 - Mar 2009
Steel tubes and pipes
5 IS 1978:1982 Line pipe (second revision) Mar 2009 2
6 IS 1979:1985 High test line pipe (second revision) Mar 2009
7 IS 2039(Part 1-3):1991 Steel tubes for bicycle and allied purposes (second Mar 2009 1
revision)
8 IS 2416:1986 Boiler and supherheater tubes for marine and naval Mar 2009 1
purposes (first revision)
9 IS 3074:2005 Steel tubes for automotive purposes (second revision) 1
10 IS 3589:2001 Steel pipes for water and sewage (168.3 to 2540 mm Nov 2006 3
outside diameter) (third revision)
11 IS 3601:2006 Steel tubes for mechanical and general engineering
purposes (second revision)
12 IS 4270:2001 Steel tubes used for water wells (third revision) Nov 2006 1
13 IS 4711:2008 Methods for sampling of steel pipes, tubes and fittings
(second revision)
14 IS 4712:1984 Forged steel,socket-welding fittings (first revision) Mar 2009 1
15 IS 4923:1997 Hollow steel sections for structural use (second revision) Mar 2009 4
16 IS 5429:1979 Dimensions for steel tubes for automotive purposes (first Mar 2009
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
78
17 IS 5433:1969 Oil well steel casing pipes and couplings Mar 2009
18 IS 5504:1997 Spiral welded pipes (first revision) Mar 2009 3
19 IS 6286:1971 Seamless and welded steel pipes for sub-zero Mar 2009 1
temperature service
20 IS 6392:1971 Steel pipe flanges Mar 2009 1
21 IS 6630:1985 Seamless ferritic alloy steel pipes for high temperature Mar 2009
steam service (first revision)
22 IS 6631:1972 Steel pipes for hydraulic purposes Mar 2009 1
23 IS 6647:1972 Drill pipes for use in oil or natural gas wells Mar 2009 1
24 IS 6913:1973 Stainless steel tubes for the food and beverage industry Mar 2009
25 IS 7138:1973 Steel tubes for furniture purposes Mar 2009 2
26 IS 7174:1974 Carbon steel tubes for use on board ships for working Mar 2009 1
pressure 0.7 to 1.7 N/mm
27 IS 8036:1976 Mild steel transformer cooling tubes Mar 2009 2
28 IS 8119:1976 Copper brazed steel tubing Mar 2009 1
29 IS 9158:1979 Cold-drawn high pressure fluid power cylinder tubes Mar 2009 1
30 IS 9295:1983 Steel tubes for idlers for belt conveyors (first revision) Mar 2009 2
31 IS 10577:1982 Lancing pipes Mar 2009 1
32 IS 11428(Part 1-3):1985 Wrought carbon steel butt welding pipe fittings Mar 2009
33 IS 11714(Part 1-5):1986 Steel tubes for heat exchangers Mar 2009
34 IS 11722:1986 Thin walled flexible quick coupling pipes Mar 2009 3
35 IS 12620:1989 Seamless steel tubes for manufacturing high pressure Mar 2009
gas cylinders
36 IS 12791:1989 High carbon chromium (bearing) steel tubes for the Mar 2009
manufacture of bearing races
37 IS 13197:1991 Grooved couplings - Specification Mar 2009
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
79
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 19(4829) Petroleum and natural gas industries - steel pipe for
pipeline transporation systems (adoption to ISO
3183:2007)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.MTD 19(4999) Steel tubes, tubular and other wrought steel fittings Part
2 Steel pipe fittings (fifth revision of IS 1239 (Part 2 )
PRODUCT 28
CODE OF PRACTICES 1
TERMINOLOGY 1
DIMENSION 2
OTHERS 5
TOTAL : 37
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
3
80
MTD 21 NON-DESTRUCTIVE TESTING SECTIONAL COMMITTEE
SCOPE - Standardization in the field of non-destructive testing
LIAISON
ISO/TC 135 Non-destructive testing
MTD 11 & 17
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1182:1983 Recommended practice for radiographic examination of Feb 2010
fusion welded butt joints in steel plates (second revision)
2 IS 2417:2003 Glossary of terms relating to ultrasonic testing (second Aug 2008
revision)
3 IS 2478:1991 Glossary of terms relating to industrial radiography Feb 2010
(second revision)
4 IS 2595:2008 Code of practice for radiographic testing (second
revision)
5 IS 2953:1985 Glossary of terms used for interpretation of welds and Feb 2010
castings radiographs (first revision)
6 IS 3415:1998 Glossary of terms used in magnetic particle flaw Aug 2008
detection (second revision)
7 IS 3657:1978 Radiographic image quality indicators(first revision) Feb 2010
8 IS 3658:1999 Code of practice for liquid penetrant flaw detection Feb 2010
(second revision)
9 IS 3664:1981 Code of practice for ultrasonic pulse echo testings by Aug 2008
contact and immersion methods (first revision)
10 IS 3703:2004 Code of practice for magnetic particle flaw detection Feb 2010
(second revision)
11 IS 4225:2004 Recommended practice for straight beam ultrasonic Feb 2010
testing of steel plates (second revision)
12 IS 4260:2004 Recommended practice for ultrasonic testing of butt
welds in ferritic steel (third revision)
13 IS 4853:1982 Recommended practice for radiographic inspection of Aug 2008
fusion welded butt joints in steel pipes (first revision)
14 IS 4904:2006 Calibration blocks for use in ultrasonic non-destructive
testing (fourth revision)
15 * IS 5334:2003 Code of practice for magnetic particle flaw detection of Aug 2008
welds (first revision)
16 IS 6394:2006 Code of practice for ultrasonic testing of seamless
metallic tubular products by contact and immersion
methods (second revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
81
17 IS 6398:1983 Code of practice for eddy current testing of ferrous Feb 2010
seamless pipes and tubes (first revision)
18 IS 6410:1991 Specification for magentic flaw detection inks and Feb 2010
powders (first revision)
19 IS 6752:1991 Code of practice for magnetic particle flaw detection of Feb 2010
ferrous pipes and tubes (first revision)
20 IS 7343:1986 Code of practice for ultrasonic testing of ferrous welded Feb 2010
pipes and tubular products (first revision)
21 IS 7666:1988 Recommended procedure for ultrasonic examination of Feb 2010 1
ferritic castings of carbon and low alloy steel (first
revision)
22 IS 7743:2006 Recommended practice for magnetic particle testing and
inspection of steel forgings (first revision)
23 IS 7810:1999 Code of practice for radiographic examination of Feb 2010
resistance spot welds on aluminium and its alloys (first
revision)
24 IS 8780:2004 Code of practice for non destructive testing of steel Feb 2010
castings(first revision)
25 IS 8791:1978 Code of practice for ultrasonic flaw detection of ferritic Aug 2008
steel forgings
26 IS 8973:1991 Glossary of terms relating to leak detection techniques Feb 2010
(first revision)
27 IS 9902:2004 Recommended practice for leak testing (first revision) Feb 2010
28 IS 10543:1983 Method for dry powder magnetic particle testing Feb 2010
29 IS 11612:2004 Code of practice for eddy current testing of non-ferrous Feb 2010
seamless pipes and tubes (first revision)
30 IS 11626:2005 Recommended practice for ultrasonic testing and Feb 2010
acceptance for forging quality steel blooms (first revision)
31 IS 11630:2005 Method for ultrasonic testing of steel plates for pressure Feb 2010
vessels and special applications (first revision)
32 IS 11655:1986 Procedure for stray flux testing of ferrous magnetic Feb 2010
seamless steel tubular products
33 IS 12147:1987 Recommended practice for wet magnetic particle Aug 2008
examination
34 IS 12148:1987 Guidelines for requirements for non-destructive testing Aug 2008
agencies
35 * IS 12666:1988 Methods for performance assessment of ultrasonic flaw
detection equipment
36 IS 12666:1988 Methods for performance assessment of ultrasonic flaw Aug 2008
detection equipment
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
82
37 * IS 12666:1988 Methods for performance assessment of ultrasonic flaw
detection equipment
38 IS 12710:1989 Glossary of terms used in accoustic emission testing Feb 2010
39 IS 12782:1989 Guidelines for using thermography for monintoring of Feb 2010
industrial components
40 IS 12860:1989 Method for determination of metallic coating thickness by Feb 2010
X-ray fluorscence techniques
41 IS 12889:1989 Performance evaluation of liquid penetrants Feb 2010
42 IS 12965:1990 Glossary of terms used in eletromagnetic (eddy current) Feb 2010
testing
43 IS 13190:1991 Recommended practice for eddy current examinationn Feb 2010
by rotating probe method of round steel bars
44 IS 13805:2004 General standards for qualification and certification of Feb 2010
non destructive testing personnel (first revision)
45 IS 14669:1999 Thermal neutron radiography - Recommendations Feb 2010
46 IS 14670:1999 Recommended practice for aceustic emission inspection Feb 2010
during hydrostatic pressure testing of system
47 IS 14800:2000 Recommended practice for rorting of ferrous/non- Feb 2010
ferrous materials using electromagnetic (eddy current)
technique
48 IS 15404:2003 Recommended practice for measuring ultrasonic velocity Aug 2008
in materials
49 IS 15435:2003 Recommended practice for measuring thickness using Aug 2008
ultrasonic method
50 IS 15452:2004 Flaw size using DGS Method - Specification Feb 2010
51 IS 15468:2004 Performance evaluation of ultrasonic thickness gauge Feb 2010
52 IS 15531:2004 Recommended practice for ultrasonic testing of weld Feb 2010
fillets of non-linear joints
53 IS 15539:2004 Recommended practice for magnetic particle examinationFeb 2010
of steam turbine rotor blades
54 IS 15540:2004 Recommended practice for eddy current testing of Feb 2010
installed non-ferromagnetic heat exchangers tubing
using dual frequency method
55 IS 15643:2006 Code of practice for non-destructive examination of Feb 2010
ploymer based composite materials
56 IS 15775:2008 Glossary of terms for signal analysis related to non-
destructive testing
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
83
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 21(4997) Recommended practice for non-destructive testing of
concrete structure using impace-echo technique
2 DOC.MTD 21(4995) Recommended practice for wet magnetic partile testing
( IS 12147)
3 DOC.MTD 21(4994) Magnetic flow detection inks and powders -
Specifications (second revision of IS 6410)
4 DOC.MTD 21(4932) Non-destructive testing - Metallographic replica technique
of surface examination (adoption of ISO 3057)
5 DOC.MTD 21(4933) Non-destructive testing radiographic illuminators -
minimum requirements (adoption of ISO 5580)
PRODUCT 2
METHODS OF TEST 14
CODE OF PRACTICES 17
TERMINOLOGY 7
OTHERS 16
TOTAL : 56
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
84
MTD 22 METALLOGRAPHY AND HEAT-TREATMENT SECTIONAL COMMITTEE
SCOPE - Standardization in the field of metallography and heat-treatment of ferrous and
non-ferrous metals and alloys
LIAISON
MTD 4,6 & 16
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1956(Part 1):1976 Glossary of terms relating to iron and steel Part I General Dec 2007
metallurgy, heat treatment and testing (first revision)
2 IS 3848:1981 Method for end quench test for hardenability of steel Apr 2009
(first revision)
3 IS 4075:1985 Method for macrostreak flaw test for steel (first revision) Dec 2007
4 IS 4163:2004 Steel - Determination of content of nonmetallic inclusions
/ ISO 4967:1998 - Micrographic method using standard diagrams (third
revision)
5 IS 4748:1988 Method for estimating average grain size of metals (first Dec 2007
revision) (Superseding IS 2853)
6 IS 5699:1970 Method for chill testing of cast iron Apr 2009
7 IS 6396:2000 Method of measuring decarburized depth of steel Jan 2007
(second revision)
8 IS 6416:1988 Method of measuring case depth of steel (first revision) Dec 2007
9 IS 7739(Part 1):1975 Code of practice for preparation of metallurgical Mar 2003
specimens Part 1 General features
10 IS 7739(Part 2):1975 Electrolytic polishing Dec 2007
11 IS 7739(Part 3):1975 Aluminium and its alloys and their examination Dec 2007
12 IS 7739(Part 4):1975 Copper and its alloys and their examination Dec 2007
13 IS 7739(Part 5):1976 Iron and steel and their examination Dec 2007
14 IS 7739(Part 6):1975 Lead and its alloys and their examination Dec 2007
15 IS 7739(Part 7):1975 Magnesium and its alloys and their examination Dec 2007
16 IS 7739(Part 8):1975 Nickel and its alloys and their examination Dec 2007
17 IS 7739(Part 9):1975 Gold, silver, platinum, palladium and their alloys Dec 2007
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
85
18 IS 7739(Part 10):1975 Tin and its alloys and their examination Dec 2007
19 IS 7739(Part 11):1976 Zinc and its alloys and their examination Dec 2007
20 IS 7754:1975 Method for designation of microstructure of graphite in Dec 2007
cast iron
21 IS 8795:1978 Method for determining case depth of carburized steel by Dec 2007
fracture test
22 IS 8860:1978 Code of practice for heat treatment of aluminium alloys Dec 2007
23 IS 9415:1980 Method for determination of hardenability and grain size Jan 2007
of tool steels by penetration fracture test
24 IS 10138(Part 1):1992 Macroscopic method for determination of non-metallic Dec 2007
inclusion content in wrought steels Part 1 Blue fracture
test method (first revision)
25 IS 10138(Part 2):1983 Step machined test method Dec 2007
26 IS 10138(Part 3):1983 Magnetic particle inspection method Dec 2007
27 IS 11371:1985 Method for macroetch test for wrought steel products Dec 2007
28 IS 12037:1987 Macrographic examination by sulphur print (Baumann Jan 2007
method)
29 IS 12211:1987 Micrographic method for assessing the distribution of Jan 2007
carbides in tool steel and bearing steels using
photomicrographs
30 IS 12366:1988 Recommended practice for heat treatment for titanium Jan 2007
and titanium alloys
31 IS 12378:1988 Method of macroetch test for titanium alloys Jan 2007
32 IS 12573:1988 Macroetch test for wrought aluminium alloy products Jan 2007
33 IS 13015:1991 Macroetch testing, inspection and rating of steel products Dec 2007
34 IS 13417:1992 Code of practice for heat treatment of steels Dec 2007
35 IS 13484:1992 Macroetch test for copper alloys Dec 2007
36 IS 13605:1992 Method for macroetch test for zinc and zinc alloys Dec 2007
37 IS 13655:1993 Code of practice for heat treatment of steels cast iron Jan 2007
38 IS 13691:1993 Determination of total or effective thicknesses of thin Jan 2007
/ ISO 4970:1979 surfaces hardened layers
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
86
39 IS 14598:1998 Heat treatment of maraging steel - Code of practice Dec 2007
40 IS 15426:2004 Steel - Metallographic characterization of duplex grain
/ ISO 14250:2000 size and distributions
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 22(4849) Macroetch test for wrought aluminium alloy product (first
revision of IS 12573)
2 DOC.MTD 22(4858) Macroscopic method for assessing the content of non
metallic inclusion in wrought steel (first revision of IS
10138)
PRODUCT 1
METHODS OF TEST 19
CODE OF PRACTICES 15
TERMINOLOGY 1
OTHERS 4
TOTAL : 40
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
87
MTD 24 CORROSION PROTECTION AND FINISHES SECTIONAL COMMITTEE
SCOPE - Standardization in the field of corrosion, passivation and protection of metals,
metal products in different applications, characteristics of protective and
decorative metalic coatings, anodic oxide coatings, applied by electrolysis, hot
dipping, thermal spraying, chemical means their testing and inspection methods
LIAISON
MTD 20
ISO/TC 156 Corrosion of metals and alloys
ISO/TC 107 Metallic and other non-organic coatings
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 1067:1981 Electroplated coatings of silver for decorative and Mar 2006
protective purposes (secondrevision)
2 IS 1068:1993 Eletroplated coatings of nickle plus chromium and copper Mar 2006 1
plus nickel plus chromium (third revision)
3 IS 1327:1988 Methods of determination of mass of tin coatings of Mar 2006
tinplate (third revision)
4 IS 1337:1993 Electroplated coatings of hard chromium for engineering Mar 2006 1
purposes (third revision)
5 IS 1340:1977 Code of practice for chromate conversion coating on Mar 2006
zinc and cadmium coated articles and zinc base
alloys(first revision)
6 IS 1359:1992 Electroplated coatings of tin(third revision) Mar 2006
7 IS 1378:1987 Oxidized-copper finishes (third revision) Mar 2006
8 IS 1572:1986 Electroplated coatings of cadmium on iron and Mar 2006
steel(second revision)
9 IS 1573:1986 Electroplated coatings of zinc on iron and steel(second Mar 2006
revision)
10 IS 1771:1986 Electroplated coatings of silver and silver alloys for Mar 2006
general engineering purposes (second revision)
11 IS 1772:1973 Eletroplated coatings of copper(first revision) Mar 2006
12 IS 1773:1982 Electroplated coatings of brass Mar 2006 1
13 IS 1868:1996 Anodic coatings on aluminium and its alloys (third Mar 2006
revision)
14 IS 1958:1989 Nickel anodes for electroplating (second revision) Mar 2006 1
15 IS 1959:1994 Silver anodes for electroplating (second revision) Mar 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
88
16 IS 1985(Part 1):1980 Recommended practice for preparation of iron and steel Mar 2006
for electroplating Part 1 high carbon steel (first revision)
17 IS 1985(Part 2):1980 Part 2 Low carbon steel (first revision) Mar 2006
18 IS 1985(Part 3):1980 Part 3 Iron castings (first revision) Mar 2006
19 IS 1986:1981 Code of practice for hard chromium plating on iron and Mar 2006
steel for general engineering purposes (first revision)
20 IS 1992:1979 Electroplated coatings of lead(first revision) Mar 2006
21 IS 2384:1963 Tin anodes for electroplating Mar 2006 1
22 IS 2450:1963 Recommended practice for plating on aluminium and its Mar 2006
alloys
23 IS 2601:1987 Brass anodes for electroplating (first revision) Mar 2006
24 IS 2602:1989 Cadmium anodes for electroplating (first revision) Mar 2006
25 IS 2603:1983 Copper anodes for electroplating (first revision) Mar 2006
26 IS 2604:1988 Lead anodes for electroplating (second revision) Mar 2006
27 IS 2605:1985 Zinc anodes for electroplating (first revision) Mar 2006
28 IS 2606:1987 Alloy lead anodes for chromium plating (second revision) Mar 2006
29 IS 2629:1985 Recommended practice for hot-dip galvanizing on iron Mar 2006 3
and steel (first revision)
30 IS 2633:1986 Methods for testing uniformity of coating of zinc coated Mar 2006
articles (second revision)
31 IS 2679:1964 Recommendations for equipment for electroplating Mar 2006
32 IS 3194:1980 Recommended practice for cleaning of metals prior to Mar 2006
electroplating (first revision)
33 IS 3203:1982 Methods of testing local thickness of electroplated Mar 2006 1
coatings_(first revision)
34 IS 3266:1982 Electroplated coatings of gold for general engineering Mar 2006
purposes (first revision)
35 IS 3531:1997 Glossary of terms relating to corrosion of metals (second Jun 2007
revision)
36 IS 3554:1966 Glossary of terms relating to electroplating Mar 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
2
89
37 IS 3618:1966 Phosphate treatment of iron and steel for protection Jun 2007
against corrosion
38 IS 3655:1985 Recommended practice for electroplating (first revision) Mar 2006
39 IS 3656:1968 Code of recommended practice for mechanical polishing Mar 2006
of metals for electroplating
40 IS 3821:1973 Methods for determination of weight of coating on hot-dip Mar 2006
aluminized iron and steel articles
41 IS 4180:1967 Code of practice for corrosion protection of light gauge Jun 2007 1
steel sections used inbuilding
42 IS 4252:1982 Electroplated coatings of gold for decorative purposes Mar 2006
(first revision)
43 IS 4736:1986 Hot-dip zinc coatings on mild steel tubes (first revision) Mar 2006 4
44 IS 4759:1996 Hot-dip zinc coatings on structural steel and other allied Mar 2006 1
products (third revision)
45 IS 4777:1968 Performance tests for protection schemes used in Jun 2007
protection of light gauge steel against corrosion
46 IS 4826:1979 Hot-dipped galvanized coatings on round steel Mar 2006 3
wires(first revision)
47 IS 5523:1983 Method of testing anodic coating on aluminium and its Mar 2006
alloys (first revision)
48 IS 5528:1985 Method of testing corrosion resistance of electroplated Mar 2006
and anodized aluminium coating by copper accelerated
acetic acid salt spray (CASS) test (first revision)
49 IS 5555:1970 Code of procedure for conducting field studies on Jun 2007 1
atmospheric corrosion of metals
50 IS 5905:1989 Sprayed aluminium and zinc coatings on iron and steel Mar 2006
(first revision)
51 IS 5925:1978 Recommended practice for silver plating for general Mar 2006
engineering purposes
52 IS 6005:1998 Code of practice for phosphating of iron and steel Jun 2007
53 IS 6009:1970 Method for evaluation of results of accelerated corrosion Mar 2006
test
54 IS 6012:1992 Method for measurement of coating thickness by eddy Mar 2006
current (first revision)
55 IS 6057:1988 Hard anodic coatings on aluminium and aluminium alloys Mar 2006
(first revision)
56 IS 6158:1984 Recommended practice for safeguarding against Mar 2006 1
embrittlement of hot-dipped galvanized iron and steel
products (second revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
90
57 IS 6159:1998 Recommended practice for design and fabrication of Mar 2006
material prior to galvanizing (first revision)
58 IS 6586:1989 Recommended practice for metal spraying for protection Mar 2006
of iron steel (first revision)
59 IS 6651:1972 Anodized aluminium for automobile use Mar 2006
60 IS 6697:1988 Hot-dip aluminium coatings on ferrous parts (other than Mar 2006
sheet,strip and wire) for general purposes (first revision)
61 IS 6745:1972 Method for determination of mass of zinc coating on zinc Mar 2006 3
coated iron and steel articles
62 IS 6910:1985 Method of testing corrosion resistance of electroplated Mar 2006 1
and anodized aluminium coatings by acetic acid salt
spray (AAS) test (first revision)
63 IS 7088:1973 Recommended practice for anodizing of aluminium and itsMar 2006
alloys
64 IS 7808:1975 Code of procedure for conducting studies on Jun 2007
underground corrosion of metals
65 IS 8038:1985 Method of testing corrosion resistance of metallic and Mar 2006
other non organic coatings by corrodkote test (first
revision)
66 IS 8062:2006 Cathodic protection of burried pipeline/structure for 1
transportation of Natural Gas Oil and liquids - Code of
practice (first revision)
67 IS 8062(Part 2):1976 Code of practice for cathodic protection of steel Jun 2007
structures, Part 2 Underground pipelines
68 IS 8062(Part 3):1977 Code of practice for cathodic protection of steel Jun 2007
structure,part 3 Ship's hull
69 IS 8062(Part 4):1979 Code of practice for cathodic protection of steel Jun 2007
structures ,part 4 Galvanic protection of dockgates,
caissons, piers and jetties
70 IS 8221:1976 Code of practice for corrosion prevention of metals and Jun 2007
metal components in packages
71 IS 8375:1977 Method for checking continuity of anodized coatings Mar 2006
72 IS 8376:1988 Electroplated coatings of nickel plus chromium on plasticsMar 2006
for decorative purposes (first revision)
73 IS 8435:1977 Methods for measurement of thickness of metallic Mar 2006
coatings on plastics
74 IS 8436:1989 Methods for thermal cycling test for evaluation of Mar 2006
electroplated plastics (first revision)
75 IS 8508:1988 Code of practice for hot-dip aluminizing of iron and steel Mar 2006
(first revision)
76 IS 8554:1977 Method of checking insulation of anodized coating by Mar 2006
measurement of break down potential
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
91
77 IS 8602:1977 Method of tests for chromate coatings on zinc and Mar 2006
cadimium surfaces
78 IS 8629(Part 1):1977 Code of practice for protection of iron and steel Mar 2006 1
structures from atmospheric corrosion, part 1 General
principles of corrosion and its prevention
79 IS 8629(Part 2):1977 Code of practice for protection of iron and steel Mar 2006 1
structures from atmospheric corrosion Part 2
Pretreatment
80 IS 8629(Part 3):1977 Code of practice for protection of iron and steel Mar 2006 1
structures from atmospheric corrosion Part 3 Protection
schemes
81 IS 9077:1979 Code of practice for corrosion protection of steel Jun 2007
reinforcement in RB and RCC construction
82 IS 9172:1979 Recommended design practice for corrosion prevention Mar 2006
of steel structures
83 IS 9530:1980 Method of testing microhardness of electroplated coatingsMar 2006
84 IS 9531:1989 Recommended practice for preparation of copper and Mar 2006
copper-base alloys for electroplating (first revision)
85 IS 9838:1981 Method for determinattion of coating mass per unit area Mar 2006
of conversion coatings on metallic materials by
gravimetric method
86 IS 9839:1981 Chromate conversion coatings on electroplated zinc and Mar 2006
cadmium coatings
87 IS 9844:1981 Method of testing corrosion resistance of electroplated Mar 2006
and anodized aluminium coatings by neutral salt spray
test
88 IS 10117:2000 Code of practice for passivation of stainless steel Mar 2006
articles, industrial equipments and components including
pipe line (first revision)
89 IS 10173:1982 Recommended practice for preparation of zinc alloy die Mar 2006
castings for electroplating
90 IS 10209:1982 Electroplated coatings of tin-lead alloy (solder) Mar 2006
91 IS 10221:2008 Code of practice for coating and wrapping of
underground mild steel pipelines (first revision)
92 IS 10461(Part 1):1994 Method for determination of resistance to intergranular Mar 2006
corrosion of austeniticstainless steel Part 1 Corrosion
tests in nitric acid medium by measurement of loss in
mass (Huoy test) (first revision)
93 IS 10461(Part 2):1994 Method for determination of resistance to intergranular Jun 2007
corrosion of austeniticstainless steels, Part 2 copper
sulphate / sulphuric acid test(Monypenny straustest)
94 IS 10471:1983 Recommended practice for corrosion prevention in Jun 2007
electronic component and assemblies
95 IS 10493:1983 Corrosion protection tests for temporary corrosion Jun 2007
preventives
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
92
96 IS 11232:1985 Chromate conversion coatings on aluminium Jun 2007
97 IS 11268:1985 Method for estimation of loss of absorptive power of Mar 2006
anodic oxide coatings after sealing dye spot test with
prior acid treatment for anodized aluminium and itsalloys
98 IS 11579:1986 Recommended practice for chromate conversion Jun 2007
coatings on aluminium
99 IS 11598(Part 1):1986 Code of practice for corrosion protection in fertilizer Jun 2007
plants Part 1 Phosphoric acid plant
100 IS 11759:1986 Recommended practice for repair of damaged hot-dip Mar 2006
galvanized coatings
101 IS 11812:1986 Recommended practice for safeguarding against Mar 2006
warpage and distortion of hot-dipped galvanized articles
102 IS 11826:1986 Recommended practice for chemical colouring for Mar 2006
engineering components in general and for bicycle
components
103 IS 11857:1986 Anodized wrought aluminium for external ar chitectural Mar 2006
applications
104 IS 11864:1986 Recommended construction practice of apparatus for Mar 2006
spray cabinet for various salt spray tests
105 IS 12393:1988 Electroplated coatings of nickel Mar 2006
106 IS 12560:1988 Code of practice for cathodic protection of heat Mar 2006
exchangers and condensers
107 IS 12594:1988 Hot-dip zinc coating on structural steel bars for concrete Mar 2006
reinforcement
108 IS 12643:1989 Corrosion protection of steel by fiberglass reinforced Mar 2006
polyester lining code ofpractice
109 IS 12753:1989 Electrogalvanized coatings on round steel wire Mar 2006
110 IS 13147:1990 Blackoxide coatings on stainless steel parts Mar 2006
111 IS 13177:1991 Passivation of stainless steel parts Mar 2006
112 IS 13212:1991 Blackoxide coatings for iron and steel parts Mar 2006
113 IS 13515:1992 Rust converter Jun 2007
114 IS 13647:1993 Electroplated coatings of rhodium for engineering Mar 2006
purposes
115 IS 13677:1993 Electronless nickel - phosphorus coatings Mar 2006
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
93
116 IS 14126:1994 Metallic coatings - measurement of thickness - Mar 2006
/ ISO 2177:1985 coulometric method
117 * IS 14149:2008 Metallic and non-metallic coatings - Measurement of
/ ISO 3543:1981 thickness - Beta backscatter method (first revision)
118 IS 14191:1996 Corrosion of Metals and alloys - classification of Mar 2006
corrosivity of atmosphere
119 IS 14297:1995 Corrosion of metals and alloys - Corrositivity of Mar 2006
atmospheres-Determination ofcorrosion rate of standard
specimens for the evaluation of corrosivity
120 IS 14321:1995 Corrosion of metals and alloys - Recommended values Mar 2006
for the corrosivity categories of atmosphlures
121 IS 14322:1996 Corrosion of Metals and Alloys - Corrosivity of Mar 2006
atmosphere - Measurement of pollution - Methods
122 IS 14503:1998 Testing of phosphate coatings - Methods Mar 2006
123 IS 15337:2003 Coal tar based anticorrosion tape for protection of under Oct 2008
ground mild steel pipelines
124 IS 15659(Part 1):2006 Petroleum and natural gas industries - External coatings
for burried or submerged pipelines uses in pipeline
transporation of gas and liquid hydrocarbons
125 IS 15659(Part 2):2006 Petroleum and natural gas industries - External coatings
for burried or submerged pipelines used in pipeline
transporation of gas and liquid hydrocarbons
PRODUCT 33
METHODS OF TEST 25
CODE OF PRACTICES 42
TERMINOLOGY 2
OTHERS 23
TOTAL : 125
* INDICATES STANDARDS UNDER REVISION ** INICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
94
MTD 25 POWDER METALLURGICAL MATERIALS AND PRODUCTS SECTIONAL
COMMITTEE
SCOPE - Standardization in the field of powder metallurgical materials and products
LIAISON
ISO/TC 119 Powder metallurgy
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 4840:2006 Metallic powder - Determination of flow time by means of
/ ISO 4490:2001 a calibrated funnel (Hall flow meter) (second revision)
2 IS 4841:1982 Method for determination of density of sintered metallic Feb 2009
materials (first revision)
3 IS 4842:1982 Method for transverse testing of hardmetals (first Feb 2009
revision)
4 IS 4848:1981 Method for determination of apparent density of free Feb 2009
flowing powders for powder metallurgical purposes
(first revision)
5 IS 4857:2005 Metallic powders,excluding powders for hardmetals -
/ ISO 3927 : 2001 Determination of compressibility in uniaxial
compression(fourth revision)
6 * IS 5432:1982 Glossary of terms relating to powder metallurgy (first Feb 2009
revision)
7 IS 5461:1984 Method for sieve analysis of metal powders (first Feb 2009
revision)
8 * IS 5642:1991 Permeable sintered metal materials - Determination of Feb 2009
/ ISO 2738 : 1987 density,oil content,and open porosity (second revision)
9 IS 5644(Part 1):1993 Metallic powders - Determination of oxygen content by Feb 2009
/ ISO 4491-1:1997 reduction methods Part 1 General guidelines (third
revision)
10 IS 5644(Part 2):2005 Part 2 Loss of mass on hydrogen reduction (hydrogen
/ ISO 4491-2:1997 loss) (fourth revision)
11 IS 5644(Part 3):2005 Part 3 Hydrogen - Reducible oxygen (fourth revision)
/ ISO 4491-3:1997
12 IS 5644(Part 4):1993 Part 4 Total oxygen by reduction extraction (third revision)Feb 2009
/ ISO 4491-4:1989
13 IS 5652(Part 1):1993 Hardmetals - Rockwell hardness test (scale A) Part 1 Feb 2009
/ ISO 3738-1:1982 Test method (second revision)
14 IS 6492:1972 Methods for sampling of powders for powder Feb 2009
metallurgical purposes
15 IS 7438:1985 Method for test for acid-insoluble content in iron, copper, Feb 2009
tin, and bronze powders (first revision)
16 IS 7505:1985 Cobalt powder for hardmetals (first revision) Feb 2009
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
95
17 IS 7506:1987 Nickel powder (first revision) Feb 2009
18 IS 7512:2006 Method for the determination of average particle size of
metal powders by Fisher subsieve sizer
19 IS 7970:1987 Tantalum powder for capacitors (first revision) Feb 2009 1
20 IS 8367:1993 Tin powder (first revision) Feb 2009 1
21 * IS 8368:1985 Tungsten carbide powder for hardmetals (first revision) Feb 2009
22 * IS 8369:1985 Titanium carbide powder for hardmetals (first revision) Feb 2009
23 * IS 8370:1977 Iron powder for powder metallurgical aplications Feb 2009
24 IS 8392:1985 Tungsten powder for hardmetals (first revision) Feb 2009 1
25 * IS 8485:1977 Copper powder for powder metallurgical applications Feb 2009
26 IS 8871:2004 Metallic Powders - Determination of tap density (second
/ ISO 3953:1993 revision)
27 IS 8876:1978 Method for the determination of residue on chlorination of Feb 2009
tungsten metal powder
28 IS 10035:1993 Bronze powder for metallic filters (first revision) Feb 2009
29 IS 10385:1982 Method for determination of radial crushing strength of Feb 2009
sintered metal powder bearings
30 IS 11110:1984 Copper lead powder Feb 2009
31 IS 11111:1984 Leaded bronze powders Feb 2009
32 IS 11506:2004 Method for determination of lubricant content of
/ ISO 13944:1996 lubricated metallic powder by Soxhlet extraction (first
revision)
33 IS 11518:1985 Determination of (the magnetization) coercivity in Feb 2009
hardmetals
34 IS 11520:1985 Method for metallographic sample preparation of Feb 2009
hardmetals
35 IS 11627:1986 Method for determination of apparent density of metallic Feb 2009
powders by Scott volumeter
36 IS 11959:1987 Method for metallographic determination of Feb 2009
microstructure in hardmetals
37 IS 11960:1987 Methods for metallographic determination of apparent Feb 2009
porosity and uncombined carbon in hardmetals
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
96
38 IS 12279:2005 Sintered metal materials (excluding hardmetals) -
/ ISO 3325:1996 Determination of transverse rupture strength (first
revision)
39 IS 12286:1988 Method for determination of abrasive wear resistance of Feb 2009
hardmetals
40 IS 12473(Part 1):1988 Chemical analysis of hardmetals by flame atomic Feb 2009
absorption spectormetry Part I General requirements
41 IS 12473(Part 2):1988 Part 2 Determination of calcium, potassium, magnesium Feb 2009
and sodium in contents from 0.001 to 0.02 percent (m/m)
42 IS 12473(Part 3):1988 Part 3 Determination of cobalt,iron ,manganese and nickelFeb 2009
in contents from 0.01to 0.5 percent (m/m)
43 IS 12473(Part 4):1988 Part 4 Determination of molybdenum,titanium and Feb 2009
vanadium in contents from 0.01 to 0.5 percent (m/m)
44 IS 12473(Part 5):1988 Part 5 Determination of cobalt, iron, manganese, Feb 2009
molybdenum, nickel, titanium and vanadium in contents
from 0.5 to 2 percent (m/m)
45 IS 12473(Part 6):1988 Part 6 Determination of chromium in contents from 0.01 toFeb 2009
2 percent (m/m)
46 IS 12483:1988 Determination of titanium in hardmetals by Feb 2009
spectrophotometric method
47 IS 12513:1988 Determination of cobalt in hardmetals by potentiometric Feb 2009
method
48 IS 12539:1988 Determination of total carbon in hardmetals by gravimetricFeb 2009
method
49 IS 12548:1988 Determination of insoluble (free) carbon in hardmetals by Feb 2009
gravimetric method
50 IS 12570:1988 Method for determination of dimensional changes Feb 2009
associated with compacting and sintering of metallic
powders (excluding powders for hardmetals)
51 IS 12571:1988 Method for determination of green strength by Feb 2009
transverse rupture of rectangularcompacts of metallic
powder
52 IS 12783:1989 Hardmetals - Vickers hardness test Feb 2009
53 IS 13780:1993 Hardmetals - Compression test Feb 2009
/ ISO 4506:1979
54 IS 13781:1993 Permeable sintered metal materials - Determination of Feb 2009
/ ISO 4003:1977 bubble test pore size
55 IS 13782:1993 Permeable sintered metal materials - Determination of Feb 2009
/ ISO 4022:1987 fluid permeability
56 IS 13803:1993 Sintered metal materials and hardmetals - Determination Feb 2009
/ ISO 3312:1987 of young modulus
57 IS 15554:2004 Sintered metal material, excluding hard metal - Tensile
/ ISO 2740:1999 test piece
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
97
58 IS 15567:2005 Sintered metal material, excluding hard metal - Fatigue
/ ISO 3928:1999 test piece
59 IS 15574:2005 Sintered metal materials excluding hardmetals -
/ ISO 5754:1978 Unnotched impact test piece
60 IS 15585:2005 Sintered metal material - Specificaiton
/ ISO 5755:2001
61 IS 15703:2006 Sintered metal material, excluding hard metals -
/ 4498:2005 Determination of apparent hardness and microhardness
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 25(4818) Titanium carbide powder for hard metals (revision of IS
8269)
2 DOC.MTD 25(4828) Sintered ferrous materials, carburized or carbnitrited -
Determination and verification of case hardening depth
by a micro-hardness test (adoption to ISO 4507:2000)
DRAFT STANDARDS FINALIZED BUT NOT YET UNDER PRINT
1 DOC.MTD 25(4924) Sintered metal materials, excluding hardmetals - Tensile
led piece (Revision of IS 15554:2004/ISO 2740:1999 by
adoption of ISO 2740:2007)
DRAFT STANDARDS ISSUED IN WIDE CIRCULATION
1 DOC.MTD 25(4817) Tungsten carbide powder for hard metals (second
revision of IS 8368)
PRODUCT 12
METHODS OF TEST 33
CODE OF PRACTICES 2
TERMINOLOGY 1
OTHERS 13
TOTAL : 61
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
98
MTD 26 INDUSTRIAL FUEL-FIRED FURNACES SECTIONAL COMMITTEE
SCOPE - Standardization in the field of industrial fuel fired furnaces
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 8849:1991 Glossary of terms relating to fuel fired industrial furnaces Mar 2004
2 IS 9180:1991 Recommendatins for performance rating of fuel-fired Aug 2006
furnaces (first revision)
3 IS 9444:2007 Code of practice for installation of oil supply units for fuel
fired furnaces (first revision)
4 IS 9977:1998 Design and construction of box type forging furnaces - Mar 2004
Guidelines (first revision)
5 IS 10298:1982 Guidelines for design and construction of mould and core Aug 2006
drying ovens for foundries
6 IS 11462:1985 Mould and core sand dryers rotary type Aug 2006
7 IS 12368:1988 Guidelines for design and construction of hot air Aug 2006
Generators
8 IS 12392:1988 Code of practice for design manufacture and testing of Aug 2006
metallic recuperators
9 IS 12553:1988 Code of practice for design,construction,installation and Aug 2006
operation of industrial gas/oil burning equipment
10 IS 12826(Part 1):1989 Code of practice for ordering, testing and acceptance of Aug 2006
industrial furnaces Part 1 purchaser's data sheet for
ordering of industrial furnaces
11 IS 12826(Part 2):1990 Part 2 Supplier's data sheet for ordering of industrial Mar 2004
Furnaces
12 IS 12826(Part 3):1990 Part 3 Testing and aceptancce of industrial furnaces Mar 2004
13 IS 14245:1995 Protective atmosphere for heat treatment furnaces - Mar 2004
Recommendations
14 IS 14492:1997 Drying preheating and commissioning of furnace Mar 2004
installations, steam boilers, industrial kilns and chimneys -
Recommendations
15 IS 15562:2005 Design and construction of bogie hearth type heat
treatment furnaces - Guidelines
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 26(4729) Recommendations for performance rating of fuel - Fired
Furnances (second revision of IS 9180)
PRODUCT 1
CODE OF PRACTICES 5
TERMINOLOGY 1
OTHERS 8
TOTAL : 15
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
99
MTD 30 SPONGE IRON AND SMELTING REDUCTION SECTIONAL COMMITTEE
SCOPE - Standards in the field of sponge iron/direct reduced iron (DRI) and feedstock
for smelting reduction
LIAISON
PCD 7 Solid mineral fuel sectional committee
ISO/TC 102
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 10852:1984 Guidelines for storage and transportation of sponge Mar 2005
iron/direct reduced iron(DRI)
2 IS 11092:2001 Iron ore pellets for direct reduction processes (second May 2006
revision)
3 IS 11093:2001 Iron ore lumps for direct reduction processes (second May 2006
revision)
4 IS 11284:1985 Method of rotary tube test for iron bearing materials for Mar 2005 1
the manufacture of sponge iron/direct reduced iron(DRI )
5 IS 11285:2001 Various tests on raw materials to be used for coal based May 2006
direct rotary kiln direct reduction (first revision)
6 IS 11795:1996 Guidelines for ash softening studies on solid reductants Mar 2007 1
for direct reduction (first revision)
7 IS 11860:1998 Guidelines for non -coking coals for solid reductant Oct 2008 2
based direct reduction in rotary kilns(and other reactors
(first revision)
8 IS 12052:2007 Method for determination of re-oxidation rate of sponge
iron/direct reduced iron(DRI) in contact with humid air
and in direct contact with water (first revision)
9 IS 12263:1987 Method for determination of rigidity of sponge iron/DRI Oct 2008
during transportation and handling
10 IS 12381:1994 Methods of determination of coal (char) reactivity for Mar 2007
direct reduction processes (first revision)
11 IS 12668:1989 Melting characterstics of sponge iron/direct reduced iron Mar 2005
(DRI)
12 IS 12929:2007 Feedstock (iron oxides and natural gas) for gas based
direct reduction processes- guidelines (first revision)
(superseding IS 14373, 14405)
13 * IS 13885:2001 Non-Magnetics/char in sponge iron (DRI)-Methods of Mar 2007
determination (first revision)
14 IS 14719:1999 Density of hot briquetted iron (HBI) - Method for Mar 2005 1
determination
15 IS 14795:2000 Method for determination of clustering of feedstock for Mar 2005
DR process
16 IS 14796:2000 Feedstock for smelting reduction process - guidelines Mar 2005 1
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
100
17 IS 14797:2000 Classification of smelting reduction process Mar 2005 1
18 IS 14991:2001 Method of determination of coal char strengths Mar 2007
19 IS 15403:2003 Method for determination of sulphur present in sponge Mar 2005
iron after separation of non magnetic materials
20 IS 15774:2007 Sponge Iron/Direct Reduction Iron (DRI) hot briquettes
iron (HBI) and cold briquettes for steel making
(amelgmating IS 10812, IS 13839 and IS 13905)
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 30(4949) Guideline for storage and transporation of sponge iron,
direct reduced iron (DRI) and hot briquetted iron (HBI)
(first revision of IS 10852)
DRAFT STANDARDS APPROVED FOR WIDE CIRCULATION
1 DOC.MTD 30(4947) Magnetics in char from coal based sponge iron (DRI) -
Methods of determination
PRODUCT 3
METHODS OF TEST 7
OTHERS 10
TOTAL : 20
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
101
MTD 32 METAL CONTAINERS SECTIONAL COMMITTEE
SCOPE - Standardization in the field of metal containers
LIAISON
ISO/TC 52
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
1 IS 916:2000 18 litre square tins (fourth revision) Feb 2005
2 ** IS 1394:1984 Glossary of terms relating to metal containers (third Feb 2005 1
revision)
3 IS 1406:1995 Rectangular tins for liquids (fourth revision) Feb 2005
4 IS 1407:1980 Round paint tins (second revision) Feb 2005
5 ** IS 1783(Part 1):1993 Drums,large,fixed ends, Part 1 Grade A drums (third Feb 2005 2
revision)
6 ** IS 1783(Part 2):1988 Drums, large, fixed ends, Part 2 Grade B drums (third Feb 2005 1
revision)
7 IS 1784:1998 Screwed closures for drums (third revision) Feb 2005
8 ** IS 1994:1987 Crown closures (second revision) Feb 2005
9 IS 2034:1987 Round open top sanitary cans for butter and cheese Feb 2005
(first revision)
10 IS 2087:1988 Square tins for general purpose (third revision) Feb 2005 1
11 IS 2123:1977 Vial (goldie) seals (first revision) Sep 2006
12 IS 2134:1981 Round tins for general purposes (second revision) Feb 2005
13 IS 2471:1963 Methods of test for metal containers Feb 2005
14 IS 2474:1982 Metal closures for drums (first revision) Feb 2005 3
15 IS 2552:1989 Steel drums (galvanized and ungalvanized) (third Sep 2006 1
revision)
16 IS 3101:1995 Aluminium collapsible tubes (second revision) Sep 2006
17 IS 3259:1966 Methods of sampling of metal containers Feb 2005
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
102
18 IS 3286:1980 Round grease tins (first revision) Feb 2005
19 IS 3575:1993 Bitumen drums (third revision) Feb 2005 2
20 IS 3603:1988 Seamless aluminium bottles (first revision) Feb 2005
21 IS 3680:1987 Round printing ink containers (first revision) Feb 2005
22 IS 4638:1981 Seamless rectangular fish tins (first revision) Feb 2005
23 IS 5241:1987 Shoe polish containers (first revision) Feb 2005 1
24 IS 5682:1991 Open top drums and kegs (first revision) Feb 2005
25 IS 6941:1973 Method for sampling metal closures Sep 2006
26 IS 7182:1973 Methods of tests for aluminium collapsible tubes Sep 2006
27 IS 7852:1975 Eye ointment tubes, small Sep 2006
28 IS 8393:1977 Roll seal pilferproof closures Sep 2006 1
29 * IS 8449:1999 Non-returnable metal aerosol dispensers Feb 2005
30 IS 8469:1977 Methods of tests for flammability of aerosol products Sep 2006
31 IS 8932:1978 Preformed metal screw caps for glass containers Sep 2006
32 IS 8933:1978 Mess tins Feb 2005
33 IS 8996:1988 20 litre steel jerry cans (first revision) Feb 2005
34 IS 9209:1979 Methods of test for the compatibility of aerosol products Feb 2005
with the metal aerosol dispensers
35 IS 9396(Part 1):1987 Round open top sanitary cans for processed foods, Part Feb 2005
I Tinplate requirements(first revision)
36 IS 9396(Part 2):1987 Round open top sanitary cans for foods and drinks, Part Feb 2005
2 Sizes and general requirements (first revision)
37 IS 9445:1980 Aluminium containers for packing of liquid pesticides Feb 2005 1
(capacity 5 litres and above)
38 IS 9503:1988 Aluminium bottles for packing of liquid pesticides (first Feb 2005 1
revision)
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
103
39 IS 9634:1980 Aerosol valves - 25.4 mm diameter Feb 2005
40 IS 9635:1980 Methods for sampling of aerosol valves Feb 2005
41 IS 9976:1981 Method of sampling of open top sanitary (OTS) cans Feb 2005
42 IS 9991:1981 Condensed milk cans Feb 2005
43 IS 9992:1991 Round and rectangular tinplate cans for liquid pesticides Feb 2005 1
(first revision)
44 IS 10325:2000 Square tins-15 kg for ghee,vanaspati, edible oils and Feb 2005
bakery shortenings (second revision)
45 IS 10339:2000 Ghee, vanaspati ane edible oil tins (second revision) Feb 2005
46 IS 11078:1993 Open top sanitary cans for milk powder (first revision) Feb 2005
47 IS 11079:1984 Metal cans for pan masala and zarda Sep 2006
48 **IS 11104:1984 Glossary of terms relating to open top sanitary cans Sep 2006 1
49 IS 12219:1987 Methods of determination of gross-lidded capacity of Feb 2005
open top sanitary cans
50 IS 12340:1988 Round open top aluminium containers for liquid pesticidesFeb 2005 1
51 IS 13997:1994 Drums large open top Feb 2005 1
52 IS 14407:1996 Aluminium cans for bevereges Feb 2005
FINALISED DRAFTS UNDER PRINT
1 DOC.MTD 32(4912) Glossary of terms relating to open top sanitary cans
(first revision)
2 DOC.MTD 32(4943) Specification for Round open top sanitary cans for butter
and cheese (first revision)
3 DOC.MTD 32(4944) Specification for round open top sanitary cans for food
and drinks Part 2 Sizes and general requirements
(second revision)
4 DOC.MTD 32(4945) Round open top sanitary cans for milk powder
specification (second revision)
PRODUCT 39
METHODS OF TEST 4
CODE OF PRACTICES 1
TERMINOLOGY 1
OTHERS 7
TOTAL : 52
* INDICATES STANDARDS UNDER REVISION ** INDICATES STANDARDS TO BE REVISED
/ INDICATES DUAL NUMBER STANDARDS | INDICATES EQUIVALENT STANDARDS
104
MTD 33 NANOTECHNOLOGIES SECTIONAL COMMITTEE
SCOPE -Standardization in the field of Nanotechnologies
LIAISON
ISO/TC 229 Nanotechnologies
Sl. No. IS Number/ DOC Number Title Reaffirm No. of
Date Amd.
STANDARDS PUBLISHED
105
ANNEX I
STANDARD PREPARED UNDER DUAL NUMBERING SYSTEM
IS/ISO TITLE
1403(Pt 1):1993
(ISO 7759:1985)
Mechanical testing of metals Reverse bend test Part 1 Sheet and Strip (second
revision)
1493(Pt 5):1990
(ISO 4693:1986)
Method of chemical anlaysis of iron ores Part 5 Determination of copper content by
atomic absorption spectrometric method
1493(Pt 6):1990
(ISO 6831:1986)
Part 6 Determination of sodium and/or potassium contents Flame atomic absorption
spectrometric method
1493(Pt 7):1973
(ISO 8753:1989)
Part 7 Determination of lead or zinc content flame atomic absorption spectrophotometric
method (first revision)
1493(Pt 8):1993
(ISO 7834:1987)
Part 8 Determination of arsenic content Molybdenum blue spectrophotometric method
(first revision)
1500:2005
(ISO 6506-1:1999)
Method for brinell hardness test for metallic materials (third revision)
1501:2002
(ISO 6507-1:1987)
Method for Vickers hardness test for metallic materials (third revision)
1528(Pt 5):2007
(ISO 5014:1997)
Methods of sampling and physical tests for refractory materials, Part 5 Method for
determination of modulus of rupture at ambient temperature of dense and insulating
shaped refractory products (third revision)
1528(Pt 9):2007
ISO 5018:1983
Part 9 Determination of true density (fourth revision)
1528(Pt 12):2007
(ISO 5016:1997)
Methods of sampling and physical tests for refractory materials Part 12 Method for
determination of bulk density and true porosity of shaped insulating refractory products
(second revision)
1528(Pt 13):2007
ISO 12676:2000
Part 13 Determination of resistance to carbon monoxide (second revision)
1528(Pt 15):2007
(ISO 5017:1998)
Methods of sampling and physical tests for refractory materials Part 15 Method for
determination of bulk density, apparent porosity and true porosity of dense shaped
refractory products (first revision)
1528(Pt 16):2007
ISO 8894-2:1990
Methods of sampling and physical tests for refractory materials Part 16 Determination of
thermal conductivity according to hot-wire method (parallel) (first revision)
1528(Pt 17):1993
(ISO 8895:1986)
Part 17 Determination of cold crushing strength of shaped insulating refractory products
1528(Pt 18):1993
(ISO 3187:1989)
Part 18 Determination of creep in compression
1528(Pt 20):1993
(ISO 5013:1985)
Part 20 Determination of modulus of rupture at elevated temperature
1528(Pt 21):2007
ISO 8894-1:1987
Part 21 Determination of thermal conductivity according to hot-wire method (cross-array)
1528(Pt 22):2007
ISO 8841:1991
Part 22 Methods for determination of permeability to gases of dense shaped refractory
products
106
1608:2005
(ISO 6892:1998)
Metallic materials Tensile testing at ambient temperature (third revision)
1828(Pt 1):2005
(ISO 7500-1:1999)
Metallic materials verification of static uniaxial testing machines Part 1
Tension/Compression testing machines Verification and calibration of the force-
measuring system (third revision)
1828(Pt 2):2002
(ISO 7500-2:1996)
Part 2 Tension creep testing machines verification of applied load
1993:1993
(ISO 1111-1:1983)
Single cold-reduced tinplate and single cold reduced black plate electrolytic and hot
dipped tinplate sheets and black plate sheet (third revision)
2281:2005
(ISO 6506-2:1999)
Method for verification of brinell hardness testing machines (third revision)
2328:2005
(ISO 8492:1998)
Metallic materials Tube flattening test (second revision)
2329:2005
(ISO 8491:1986)
Metallic materials Tube (in full section) Bend test (second revision)
2335:2005
(ISO 8493:1998)
Metallic materials Tube drift expanding test (second revision)
3600(Pt 5):1983
(ISO 5173:1981)
Methods of testing of non-welding joints and weld metal I steel Part 5 Transverse root
and bend test on butt weld (second revision)
3600(Pt 6):1993
(ISO 5177:1981)
Part 6 Transverse side and bend test on butt weld (second revision)
3803(Pt 1):1989
(ISO 2566-1:1984)
Steel conversion of elongation value Part 1 Carbon and Low alloy steels (second
revision)
3803(Pt 2):1989
(ISO 2566-2:1984)
Steel conversion of elongation values Part 2 Austenitic steels (second revision)
4041:2006
(ISO 836:2001)
Terminology for refractories (first revision)
4132:2005
(ISO 6506-3:1999)
Method for calibration of standardized blocks to be used for brinell hardness testing
machines (second revision)
4133:2002
(ISO 6507-3:1997)
Method for calibration of standardized blocks to be used for Vickers hardness testing
machines (second revision)
4163:2004
(ISO 4967:1998)
Steel Determination of content of nonmetallic inclusions Micrographic method using
standard diagrams (third revision)
4857:2005
(ISO 3927:2001)
Metallic powders, excluding powders for hard metals Determination of compactibility
(compressibility) in uniaxial compression (fourth revision)
5642:1991
(ISO 2738:1987)
Permeable sintered metal materials Determination of density, oil content, and open
porosity (second revision)
5644(Pt 1):1993
(ISO 4491-1:1989)
Metallic powders Determination of oxygen content by reduction methods, Part 1
General guidelines (third revision)
5644(Pt 2):2005
(ISO 4491-2:1997)
Part 2 Loss of mass on hydrogen reduction (hydrogen loss) (fourth revision)
5644(Pt 3):2005
(ISO 4491-4:1989)
Part 3 Hydrogen reducible oxygen (fourth revision)
107
5644(Pt 4):1993
(ISO 4491-4:1989)
Part 4 Total oxygen by reduction extraction (third revision)
5652(Pt 1):1993
(ISO 3728:1993)
Hard metals- Rockwell hardness test (Scale A)
8871:2004
(ISO 3953:1993)
Metallic powders Determination of tap density (second revision)
9025:1993
(ISO 1111-2:1983)
Single cold-reduced tinplate and single cold-reduced black plate electrolytic tinplate coil
and black plate coil for subsequent cutting into sheet form (first revision)
10175(Pt 1):1993
(ISO 8490:1986)
Mechanical testing of metals Modified erichsen cupping test sheet and strip Pt 1
Thickness upto 2 mm (first revision)
10793:1983
(ISO 6520:1982)
Classification of imperfection in metallic fusion welds with explanations
11506:2004
(ISO 13944:1996)
Method for determination of lubricant content of lubricated metallic powder by soxhlet
extraction (first revision)
11999:2007
(ISO 10113)
Method for determination of plastic strain ration `r for sheet metals (first revision)
12228:1987
(ISO 8495:1986)
Scale adhesion test for oxygen free copper
12260:1987
(ISO 8495:1986)
Ring expanding test on metallic tubes
12279:2005
(ISO 3325:1996)
Sintered metal materials (excluding hardmetals) Determination of transverse strength
(first revision)
12872:1990
(ISO 9513:1989)
Metallic materials verification of extensometers used in uniaxial testing
12893:2006
(ISO 1146:1998)
Pyrometric reference cones for laboratory use Specification (first revision)
13007:1991
(ISO 6848:1984)
Tungsten electrodes for inert gas shielded arc welding and for plasma cutting and
welding
13043:1991
(ISO 2401:1972)
Covered manual metal arc welding electrodes Determination of efficiency, metal
recovery and deposition co-efficient
13691:1993
(ISO 4970:1979)
Steel Determination of total or effective thickness of thin surface hard metals layers
13780:1993
(ISO 4506:1979)
Hard metals Compression test
13781:1993
(ISO 4003:1977)
Permeable sintered metal materials Determination of bubble test pore size
13782:1993
(ISO 4022:1987)
Permeable sintered metal materials Determination of fluid permeability
13803:1993
(ISO 3312:1987)
Sintered metal materials and hard metals Determination of young modulus
13954:1994 (ISO
4977-1:1988)
Double cold-reduced electrolytic tin plate sheet
108
13955:1994
(ISO 4977-2:1988)
Double cold-reduced electrolytic tin plate sheet for subsequent cutting into sheets
14126:1994
(ISO 2177:1985)
Metallic coatings measurement of thickness coluometric method
14149:1994
(ISO 3543:1981)
Metallic and non-metallic coating measurement of thickness Beta backscatter method
14644(Pt 1):1998
(ISO 7530-1:1990)
Nickel alloys Flames atomic absorption spectrometric analysis Part 1 General
requirements and sample dissolution
14644(Pt 2):1998
(ISO 7530-2:1990)
Part 2 Determination of cobalt content
14644(Pt 3):1998
(ISO 7530-3:1990)
Part 3 Determination of chromium content
14644(Pt 4):1998
(ISO 7530-4:1990)
Part 4 Determination of copper content
14644(Pt 5):1998
(ISO 7530-5:1990)
Part 5 Determination iron content
14644(Pt 6):1998
(ISO 7530-6:1990)
Part 6 Determination of manganese content
14644(Pt 7):2000
(ISO 7530-7:1990)
Part 7 Determination of aluminium content
14644(Pt 8):2000
(ISO 7530-8:1990)
Part 8 Determination of silicon content
14644(Pt 9):2000
(ISO 7530-9:1990)
Part 9 Determination of vanadium content
14741:1998
(ISO 8654:1987)
Colours of gold alloys Definition, range of colours and designation
15326(Pt 1):2003
(ISO 3834-1:1994)
Quality requirements for welding Fusion welding of metallic materials Part 1 Guidelines
for selection and use
15326(Pt 2):2003
(ISO 3834-2:1994)
Part 2 Comprehensive quality requirements
15326(Pt 3):2003
(ISO 3834-3:1994)
Part 3 Standards quality requirements
15326(Pt 4):2003
(ISO 3834-4:1994)
Part 4 Elementary quality requirements
15327:2003
(ISO 14731:1997)
Welding coordination Tasks and responsibility
15387:2003
(ISO 5830:1984)
Resistance spot welding male electrode caps
15426:2004
(ISO 14250:2000)
Steel Metallographic characterization of duplex grain size and distributions
15554:2004
(ISO 2740:1999)
Sintered metal materials, excluding hard metals Tensile test piece
109
15567:2005
(ISO 3928:1999)
Sintered metal material, excluding hard metal Fatigue test piece
15574:2005
(ISO 5754:1978)
Sintered metal materials excluding hardmetals Unnotched impact test piece
15585:2005
(ISO 5755:2001)
Sintered metal materials - Specification
15728:2006
(ISO 15620:2000)
Welding friction welding of metallic materials
IS 15703:2006
ISO 4498:2005
Sintered metal materials, excluding hardmetals Determinaiton of apparent hardness
and microhardness
IS 15756:2007
ISO 10275:1993
Metallic Materials- Sheet and Strip Determination of Tensile Strain Hardening Exponent
IS 15839:2009
ISO 13520:2002
Determination of ferrite content in Austenitic stainless steel castings
IS/ISO 16160:2008 Continuous hot rolled steel sheet products Dimensional and shape tolerance
IS/ISO 16162:2008 Continuous cold-rolled steel sheet products Dimensional and shape tolerance
IS/ISO 16163:2008 Continuous hot dipped coated steel products dimensional & shape tolerances
110
ANNEX II
STANDARDS WITHDRAWN / SUPERSEDED
Sl. No. Committe No. IS No./ DOC Number Title
1 4 SP 2 : 1982 Comparison of Indian and overseas basic sizes for sheet and wire
(first revision)
2 15 IS 7:1980 Moderate heat duty fireclay refractories group B (Withdrawn)
3 7 IS 20:1977 Superseded by IS 617:1994
4 7 IS 22:1950 98 pecent aluminium notched bars and ingots for remelting purposes
(tentative)(Withdrawn) (see IS 2590)
5 11 IS 24:1956 Brazing solder (revised) (Superseded by IS 2927:1950)
6 7 IS 29:1950 Aluminium sheet and coils for aircraft purpose (Withdrawn)
7 7 IS 30:1953 Aluminium coated high-tensile aluminium alloy sheets and coils for
aircraft purposes (Withdrawn)
8 7 IS 31:1950 Aluminium manganese alloy sheets and coils (Withdrawn) (see IS
737:1986)
9 11 IS 192:1956 Silver solder (revised) (Superseded by IS 2927:1975)
10 15 IS 194:1950 Recommendations for refractories for railways (Withdrawn)
11 3 IS 223:1950 Tensile testing of metals (ferrous) (Withdrawn)
12 6 IS 224:1979 Foundry pig iron for general purposes (see IS 13502:1992)
13 6 IS 225:1969 Pig iron (charcoal) (second revision) (Withdrawn)
14 4 IS 226:1975 Structural steel (standard quality) (fifth revision) (Superseded by IS
2062:1992)
15 6 IS 227:1954 Malleable iron castings (Withdrawn) (see IS 2107 and 2108)
16 13 IS 372:1962 Manganese ore-battery grade (tentative) (Withdrawn) (see IS 1449 &
1473)
17 13 IS 373:1952 Manganese ore metallurgical grade (tentative) (Withdrawn)-(see IS
4763 and 1473)
18 24 IS 429:1954 Methods for testing weight and uniformity of coatings on galvanized
iron and steel wires and steel sheets (Superseded by IS 2633)
(Withdrawn)
19 9 IS 441:1955 Methods for chemical analysis of brasses and bronzes(Withdrawn)
20 32 IS 442:1954 Drums for paints (Superseded by IS 2552:1989)
21 15 IS 485:1954 Methods of sampling and testing of refractory materials (Tentative)
(Withdrawn)(see IS 1527, IS 1528 Part I to 14)
22 3 IS 497:1953 Tensile testing of metals (non-ferrous) (Withdrawn)
23 14 IS 503:1963 Alloy austenitic manganese steel castings (Withdrawn) (see IS 276)
24 4 IS 597:1978 Pack-rolled tinplate and pack rolled black plate (second revision)
25 32 IS 618:1956 Kegs (open top drums) for paints (Superseded by IS 2552:1989)
26 4 IS 727:1964 Hard drawn carbon steel wire for springs for general engineering
pruposes (revised) (Withdrawn)
27 24 IS 728:1956 Methods for determining of weight, thicikness and uniformity of coating
on galvanised articles other than wires and sheets (Superseded by IS
2633)
28 7 IS 735:1956 Wrought aluminium and aluminium alloys forging stock (for general
engineeing purposes ) (Superseded by IS 734:1975)
111
Sl. No. Committe No. IS No./ DOC Number Title
29 11 IS 815:1974 Classification coding of covered electrodes for metal arc welding of
structuralsteels (second revision) (Superseded by IS 814:1991)
30 11 IS 823:1964 Code of procedure for manual metal arc welding of mild steel
(Withdrawn)
31 4 IS 961:1975 Structural steel (high tensile) (second revision) (Superseded by IS
8500)
32 9 IS 998:1959 Methods of chemical analysis of soft solder (Withdrawn)
33 5 IS 1111:1964 Spiegeleisen (revised) (Withdrawn)
34 4 IS 1137:1990 Thicknesses of sheet and diameters of wire (first revision)
35 8 IS 1138:1958 Sizes of metal strip, sheet brass (round square)flats and plate for
structuraland general engineering purpose (Withdrawn)
36 11 IS 1181:1967 Qualifying tests for metal arc welders (engaged in welding structures
other than pipes ) (first revision) [(Superseded by IS 7318(Part 1):1974]
37 19 IS 1279:1958 Electrically welded mild steel boilers and superheater tubes for design
steam temperatuures not exceeding 155 degree centigrade or 850
degree centrigrade (Superseded by IS 1914)
38 2 IS 1338:1959 Specification for certified samples for metallurgical analysis
(withdrawan)
39 9 IS 1339:1992 Lead and lead alloys for sheathing of electric cables (third revision)
40 9 IS 1345:1960 Methods of chemical analysis of printing metal
41 9 IS 1357:1984 Printing type metal ingots (third revision)
42 8 IS 1385:1968 Phosphor bronze rods and bars, sheet and strip and wire (first
revision) (Superseded by IS 7608:1987, IS 7811:1985 and IS
7814:1985)
43 32 IS 1413:1970 Round vanaspati tins (first revision ) (Superseded by IS 10339:1988)
44 11 IS 1442:1964 Covered electrodes for metal arc welding of high tensile structural
steel (revised) (Superseded by IS 814)
45 3 IS 1501(Part 1):1984 Part 1 HV 5 to HV 100 (second revision) (Superseding IS 1810:1961,
IS 2866:1968and IS 9258:1979) (third revision)
46 3 IS 1501(Part 2):1984 Part 2 HV 0.2 to less than HV 5 (second revision)
47 3 IS 1501(Part 3):1987 Part 3 Less than HV 0.2 (second revision)
48 3 IS 1521:1972 Method for tensile testing of steel wire (first revision) (Superseded by
IS 1608:1995)
49 15 IS 1528(Part 8):1974 Determination of apparent porosity (first revision )
50 6 IS 1538(Part 1):1976 General requirements (superseded by IS 1538:1993)
51 6 IS 1538(Part 2):1976 Specific requirements for sockets and spigots of pipes (superseded
by IS 1538:1993)
52 6 IS 1538(Part 3):1976 Specific requirements for sockets of fittings (superseded by IS
1538:1993)
53 6 IS 1538(Part 4):1976 Specific requirements for flanges of pipes and fittings (superseded by
IS 1538:1993)
54 6 IS 1538(Part 5):1976 Specific requirements for raised flanges (Superseded by IS
1538:1993)
55 6 IS 1538(Part 6):1976 Specific requirements for standard flange drilling of flanged pipes and
fittings (Superseded by IS 1538:1993)
56 6 IS 1538(Part 7):1976 Specific requirements for flanged sockets (superseded by IS
1538:1993)
57 6 IS 1538(Part 8):1976 Specific requirments for flanged spigots (superseded by IS
1538:1993)
112
Sl. No. Committe No. IS No./ DOC Number Title
58 6 IS 1538(Part 9):1976 Specific requirements for collars (superseded by IS 1538:1993)
59 6 IS 1538(Part 10):1976 Specific requirements for double socket bends (superseded by IS
1538:1993)
60 6 IS 1538(Part 11):1976 Specific requirements for tees,all sockets (superseded by IS
1538:1993)
61 6 IS 1538(Part 12):1976 Specific requirements for double socket tee with flanged branch
(superseded byIS 1538:1993)
62 6 IS 1538(Part 13):1976 Specific requirements for crosses, all sockets (superseded by IS
1538:1993)
63 6 IS 1538(Part 14):1984 Specific requirements for double socket tapers (third revision)
(superseded byIS 1538:1993)
64 6 IS 1538(Part 15):1976 Specific requirements for caps (superseded by IS 1538:1993)
65 6 IS 1538(Part 16):1976 Specific requirements for plugs (superseded by IS 1593:1993)
66 6 IS 1538(Part 17):1976 Specific requirements for bell mouth pieces (superseded by IS
1538:1993)
67 6 IS 1538(Part 18):1976 Specific requirements for double flanged bends (superseded by IS
1538:1993)
68 6 IS 1538(Part 19):1976 Specific requirements for all flanged tees (superseded by IS
1538:1993)
69 6 IS 1538(Part 20):1976 Specific requirements for all flanged crosses (superseded by IS
1538:1993)
70 6 IS 1538(Part 21):1976 Specific requirements for double flanged tapers (superseded by IS
1538:1993)
71 6 IS 1538(Part 22):1976 Specific requirements for split puddle or body flanges (superseded by
IS 1538:1993)
72 6 IS 1538(Part 23):1976 Specific requirements for blank flanges (superseded by IS 1538:1993)
73 6 IS 1538(Part 24):1984 Specific requirements for all flanged radial tees (second revision)
(superseded by IS 1538:1993)
74 2 IS 1546:1960 Method for determination of arsenic in iron and steel (Withdrawn)
(see IS 228(Part 13):1982
75 32 IS 1549:1960 Steel drums and kegs (galvanized and ungalvanized) (Withdrawn)
(see IS 2552 :1989)
76 8 IS 1550:1967 Copper sheet and strip for utensils and for general purposes (first
revision) (Superseded by IS 14811:2000)
77 16 IS 1570:1961 Schedules for wrought steels for general engineering purposes
78 31 IS 1660(Part 2):1972 Cookery colanders [incorporated as IS 1660 (Part 1)]
79 31 IS 1660(Part 3):1972 Pans patty (jelly mould) for baking [incorporated in IS 1660(Part 1)]
80 31 IS 1660(Part 4):1977 General requirements [incorporated in IS 1660(Part 1)]
81 3 IS 1663:1972 Method for tensile testing of steel sheet and strri of thickness 0.5 mm
to 3 mm(first revision) (Superseded by IS 1608:1995)
82 3 IS 1692:1974 Method for simple bend testing of steel sheet and strip less than 3 mm
thick (first revision) (Superseded by IS 1599:1983)
83 3 IS 1754(Part 1):1986 Part I HV 0.2 to HV 100 (third revision)
84 3 IS 1754(Part 2):1986 Part 2 Less than HV 0.2 (second revision)
85 3 IS 1756:1974 Methods of modified arichsen cupping test for steel sheet and strip
(first revision ) (Superseded by IS 10175:1982)
113
Sl. No. Committe No. IS No./ DOC Number Title
86 29 IS 1760:1962 Methods of chemical analysis of limestone,dolomite and allied materials
(withdrawn)
87 32 IS 1783(Part 3):1983 Drums, large, fixed ends, Grade C drums (second revision)
(Withdrawn)
88 3 IS 1789:1961 Method for Brinell hardness test for grey cast iron (Superseded by IS
1500:1983)
89 3 IS 1790:1961 Method for brinell hardness test for light metals and their alloys
(Superseded by IS 1500:1983)
90 3 IS 1810:1961 Method for Vickers hardness test for light metals and their alloys
(superseded by IS 1501:1984)
91 3 IS 1816:1979 Method for tensile test for light metals and their alloys (first revision)
(Superseded by IS 1608:1995)
92 7 IS 1841:1978 EC grade aluminium rod produced by rolling (second revision)
(Withdrawn)
93 7 IS 1847:1961 99.7 percent primary aluminium notched bars and ingots for remelting
for aircraft purposes (Superseded by IS 23:1980)
94 3 IS 1894:1972 Method for tensile testing of steel tubes (first revision) (Superseded by
IS 1608:1995)
95 19 IS 1914(Part 1-4):1982 Carbon steel boilers tubes and superheater tubes (second revision)
96 13 IS 1917:1962 Method of chemical anlaysis of quartizite and high silica sand
97 8 IS 1972:1989 Copper plate, sheet and strip for industrial purposes (second
revision) (Superseded by IS 14811:2000)
98 4 IS 1977:1996 Low tensile structural steels (third revision)
99 13 IS 2000:1962 Method of chemical analysis of bauxite
100 4 IS 2040:1962 Steel bars for stays (Withdrawn) (see IS 1990:1973)
101 15 IS 2045:1962 Natural sillimanite blocks for glass melting tanks furnaces (Withdrawn)
102 4 IS 2073:1970 Specification for carbon steel black bars for production of machined
parts forgeneral engineering purposes (first revision) (Withdrawn)
(see IS 7283:1974)
103 3 IS 2078:1979 Method for tensile testing of grey cast iron (first revision) (Superseded
by IS1608:1995)
104 6 IS 2107:1977 Whiteheart malleable iron castings (Superseded by IS 14329:1995)
105 6 IS 2108:1977 Blackheart malleable iron castings (Superseded by IS 14329:1995)
106 10 IS 2278:1963 Fine gold bar, sheet, wire, granules and token (LAGDI or MOHUR)
(Withdrawn)
107 8 IS 2313:1963 Phosphor copper ingot (Withdrawn)
108 3 IS 2348:1963 Method for drift expanding test on copper and copper alloy tubes
(Superseded byIS 2335:1985)
109 8 IS 2371:1973 Solid drawn copper alloy tubes for condensers, evaporators, heaters
and cooler tubes using saline hard water (Withdrawn) (Superseded by
IS 1545:1982)
110 8 IS 2456:1963 Brass strip for pen nibs (withdrawn)
111 19 IS 2484:1979 Dimensions for steel tubes for bicycle purposes (withdrawn)
112 4 IS 2517:1963 Bright bars for threaded components (Withdrawn)
113 21 IS 2598:1966 Safety code for industrial radiographic practice
114
Sl. No. Committe No. IS No./ DOC Number Title
114 9 IS 2600:1964 Methods of chemical analysis of high purity zinc and zinc base alloys
for die casting (Withdrawn)
115 6 IS 2640:1977 Pearlitic malleable iron castings (superseded by IS 114329:1995)
116 3 IS 2654:1977 Method for tensile testing of copper and copper alloys (first revision)
(Superseded by IS 1608:1995)
117 3 IS 2655:1964 Method for tensile testing of copper and copper alloy tubes
(Superseded by IS 1608:1995)
118 3 IS 2656:1964 Method for tensile testing of copper and copper alloy wires
(Superseded by IS 1608:1995)
119 3 IS 2657:1964 Method for tensile testing of aluminium and aluminium alloy tube
(Superseded byIS 1608:1995)
120 3 IS 2658:1964 Method for tensile testing for aluminium and aluminium alloy wire
(Superseded by IS 1608:1995)
121 11 IS 2680:1964 Filler rods and wire for inert gas tungsten arc welding (Withdrawn)
(see IS 5856,,IS 5897, IS 6419 and IS 6560)
122 22 IS 2756:1965 Method for estimating the average grain size of wrought copper and
copper base alloys (Withdrawn) (see IS 4748)
123 6 IS 2841:1978 Pig iron for special purposes (Superseded by IS 13502:1992)
124 6 IS 2842:1980 Basic pig iron for steel making purposes (Superseded by IS
13502:1992)
125 22 IS 2853:1964 Methods of determining austenitic grain size in steel (Superseded by
IS 4748)
126 3 IS 2866:1968 Method for vickers hardness test for copper and copper alloys
(Superseded by IS1501(Pt 1):1984)
127 20 IS 2983:1971 Recommended practice for hot tinning of brassware (first revision)
(Withdrawn)
128 14 IS 3021:1975 Bentonite for use in foundries (Withdrawn) (see IS 12446:1988)
129 3 IS 3054:1965 Method for Brinell hardness test for copper and copper alloys
(Superseded by IS 1500:1983)
130 8 IS 3057:1965 Copper sheets for photo process engravings
131 29 IS 3200(Part 3):1991 Part 3 Determination of total aluminium by ccomplexometric method
(first revision)
132 29 IS 3200(Part 8):1992 Part 8 Determination of phosphorus pentroxide and silica
(first revision)
133 3 IS 3260:1965 Method for bend test for copper and copper alloys (Superseded by IS
1599:1975)
134 8 IS 3285:1965 Copper strip for electrical purposes withdrawn or rolled edged (above
150 mm width) (withdrawn) (Superseded by IS 1897:1983)
135 8 IS 3332:1965 Nickel silver strip and foil for telecommunication purposes
(Withdrawn) (Superseded by IS 2283:1981)
136 3 IS 3388:1965 Method for wrapping test for copper and copper alloy wire
(Superseded by IS 1755:1983)
137 3 IS 3408:1965 Method for non-interrupted creep testing of steel at elevated
temperature (Superseded by IS 3407(Part 1):1983
138 3 IS 3409:1965 Method for creep stress rupture testing of steel of elevated
temperature [Superseded by IS 3407 (Part 2):1983]
139 4 IS 3422:1966 Code of practice for packaging of steel and steel products for export
purposes (withdrawn)
115
Sl. No. Committe No. IS No./ DOC Number Title
140 7 IS 3435:1968 99 Percent secondary aluminium notched bars and ingots for
remelting
for aircraft purposes (Withdrawn)
141 6 IS 3486:1966 Cast iron spigot and socket drain pipes (Withdrawn)
142 8 IS 3487:1994 Copper-Cold rolled strip and foil for gaskets, washers and eyelets
(first revision) (Superseded by IS 14811 :2000)
143 8 IS 3488:1980 Brass bars, rods and sections suitable for forging (first revision)
(Supersededby IS 6912)
144 4 IS 3503:1966 Steel for marine boilers, pressure vessels and welded machinery
structures (withdrawn)
145 10 IS 3541:1981 Code of practice for manufacturers of 23.3 and lowe carat gold alloys
(first revision) (Superseded by IS 2740:1999)
146 19 IS 3609:1966 Chrome molybdenum steel, seamless, boiler and superheater tubes
147 14 IS 3666:1966 Tests for foundry core oils (Superseded by IS 9009:1992)
148 6 IS 3684:1966 Metals for casting moveable types (Withdrawn)
149 31 IS 3695:1966 Thick bottom aluminium utensils (Redesignated as IS 1660 Part VI)
150 4 IS 3747:1982 Hot rolled steel plates and sheets for flanging and pressing (first
revision) (Superseded by IS 5986:1992)
151 16 IS 3749:1978 Tool and die steels for cold work (first revision) (Superseded by IS
3748:1990)
152 3 IS 3754:1988 Method for calibration of standardized blocks to be used for Rockwell
hardness testing machines(Scales A-B-C-D-E-F-G-H-K) (first revision)
( Superseded by IS 1586 :2000)
153 3 IS 3804:1988 Method for calibration of Rockwell hardness testing machines (Scales
A-B-C-D-E-F-G-H-K)(first revision) (Superseded by IS 1586 :2000)
154 4 IS 3835:1966 Aluminized steel core wire for aluminium conductors (ACSR)
(withdrawn)
155 4 IS 3945:1966 Steel for naval purposes (withdrawn)
156 31 IS 3981:1967 Sigries (Withdrawn)
157 4 IS 4030:1973 Cold rolled carbon steel strip for general engineering purposes (first
revision) (Superseded by IS 513:1986)
158 8 IS 4077:1967 Copper-nickel shot (Withdrawn) (Superseded by IS 5743:1970)
159 31 IS 4136:1967 Aluminium Compartmental trays (Superseded by IS 1660(Part
6):1980)
160 14 IS 4140:1978 Limestone for use in foundries (first revision)
161 3 IS 4168:1967 Method for wrapping test of aluminium and aluminium alloy wire
(Superseded by IS 1717:1985)
162 3 IS 4176:1967 Method for simple torsion test of aluiminum and aluminium alloy wire
(Superseded by IS 1717:1985)
163 3 IS 4177:1967 Method for flattening test of aluminium and aluminium alloy tubes
(Superseded by IS 2328:1983)
164 19 IS 4310:1967 Weldable steel pipe fittings for marine purposes
165 14 IS 4331(Part 1):1980 Comparison of Indian and overseas standards for steel castings Part 1
Steel castings for general engineering purposes (first
revision)(Withdrawn)
166 18 IS 4369:1967 Steel bars for forgings (Withdrawn) (Superseded by IS 1875:1992)
167 14 IS 4476:1975 Crane-suspended hand-operated geared ladles for steel foundries
(first revision)(Superseded by IS 4475(Pt 1 - 4)
168 19 IS 4516:1968 Elliptical mild steel tubes
169 3 IS 4598:1968 Method for simple bend test for aluminium and aluminium alloy sheet
and strip of thickness betweenn 0.2 mm and 7 mm (Superseded by IS
1599:1985)
116
Sl. No. Committe No. IS No./ DOC Number Title
170 3 IS 4599:1968 Method for drift expanding test on aluminium and aluminium alloy
tubes (Superseded by IS 2335:1985)
171 3 IS 4713:1968 Method for determination off lower yield stress, proof stress and
proving test ffor steel at elevated temperatures (Superseded by IS
1608:1995)
172 15 IS 4812:1996 Silica refractor ies for coke oven (second revision)
173 31 IS 4823:1981 Brass table utensils (first revision) (Withdrawn)
174 4 IS 4855:1968 Bright steel bars for machining (Withdrawn) (Superseded by IS
7270:1974 and IS7271:1974)
175 18 IS 4901:1968 Code of practice forgings (Withdrawn) (Superseded by IS 7743)
176 19 IS 4922:1968 Seamless steel tubes (suitable for welding) for aircraft purposes
177 12 IS 4944:1968 Code of practice for welding at low ambient temperature (withdrawn)
178 6 IS 5020:1969 Hematite pig iron (Withdrawn) (Superseded by IS 13502:1992)
179 6 IS 5021:1969 Acid-resisting high-silica pig iron (withdrawn) (Superseded by IS
13502:1992)
180 3 IS 5071:1969 Method for flattening test for copper and copper alloy tubes of circular
section (Superseded by IS 2328:1983)
181 3 IS 5072:1988 Methods for Rockwell superficial hardness test (Scales 15N, 30N, 45N,
15T, 30Tand 45T) (first revision) (Superseded by IS 1586 :2000)
182 3 IS 5073:1988 Method for verification of Rockwell superficial hardness testing
machines (Scales 15N,30N,45N, 15T,30T and 45T) (first revision)
(Superseded by IS 1586 :2000)
183 3 IS 5076:1988 Method for calibration of standardized blocks to be used for rockwell
superficial hardness testing machines (Scales 15N,30N,45N,15T,30T
and 45T) (first revision) (Superseded by IS 1586 :2000)
184 31 IS 5136:1981 Brass serving utensils (first revision) (Withdrawn)
185 4 IS 5239:1969 Wire rod for the manufacture of aluminized steel core wire for
aluminium conductors (withdrawn)
186 24 IS 5243:1969 Tin coated finish for cooking utensils (Withdrawn)
187 4 IS 5272:1969 Carbon steel sheets for integral coaches (Superseded by IS
5986:1992)
188 24 IS 5274:1969 Recommended practice for hot dip tinning of plain carbon steels
(Withdrawn)
189 10 IS 5320:1969 Fine silver ingot (Withdrawn) (see IS 2229)
190 24 IS 5358:1969 Hot dip galvanized coatings on fasteners (Superseded by IS 1367(Part
13):1982
191 11 IS 5462:1969 Colour code for identification of covered electrodes and metal arc
welding (Withdrawn)
192 13 IS 5483:1969 Method for determination of specific gravity of iron ores, pellets and
sinters (Superseded by IS 11896:1986)
193 8 IS 5494:1969 Leaded brass sheets and strips for use in manufacture of tubewell
strainers (withdrawn)
194 3 IS 5619:1970 Recommendations for fatigue testing of metals_(withdrawn)
195 31 IS 5765:1970 Box,lunch, aluminium [Redesignated as IS 1660(Part VII)]
196 13 IS 5843:1970 Method of measuring the bulk density of iron ore and iron ore
agglomerates including sinters in a large container (applicable for size
over 40mm) (Superseded by IS 5842:1986)
117
Sl. No. Committe No. IS No./ DOC Number Title
197 7 IS 5902:1970 Aluminium and aluminium alloy rivet stock for cold forged rivets for
aircraft purposes (Withdrawn) (see IS 8513:1977,IS 8514:1977,IS
8515:1977,IS 8936:1978,IS 8937:1978 and IS 8938:1978)
198 7 IS 5909:1970 Aluminium and aluminium manganese alloy sheet and strip for aircraft
purposes (Withdrawn) (Superseded IS 7882:1975 and IS 7883:1975)
199 19 IS 5929:1970 Inspection and testing procedure for circular steel tubes for aircraft
purposes
200 4 IS 5993:1970 Aluminized steel wire for telegraph and telephone purposes
(withdrawn)
201 2 IS 6010:1971 Recommended practice for photographic processing in
spectrochemical analysis (withdrawan)
202 19 IS 6011:1970 Carbon steel tubes for use on board ships for pressure services
203 32 IS 6093:1971 Methods of determining the capacity and dimensions of hermetically
sealed metalfoodcontainers (superseded by IS 12219-1987)
204 11 IS 6227:1971 Code of practice for use of metal arc welding in tubular structure
(Superseded by IS 9595)
205 3 IS 6253:1971 Method for simple torsion testing of copper and copper alloy wire
(Superseded by IS 1717:1985)
206 8 IS 6517(Part 1):1972 Methods of chemical analysis of copper master alloys (Pt 1) -
Determination of copper nickel alloy
207 3 IS 6520:1972 Method for the determination of K-values of a tensile testing
system_(withdrawn)
208 3 IS 6878:1973 Method of reverse bend testing of copper and copper alloy wire
(Superseded by IS 1716:1985)
209 4 IS 6914:1978 Cast billets ingots and continuously cast billets for rolling into structural
steel(standard quality) (first revision) (Superseded by IS 2830:1992)
210 4 IS 6915: Cast billet ingots and continuously cast billets for rolling into structural
steel: ordinary quality (first revision) (Superseded by IS 2831)
211 32 IS 7024:1973 Ghee and edible oil tins (round and square) (Superseded by IS
10339:1988)
212 7 IS 7094:1984 Aluminium and aluminium alloy welded tube for general engineering
purposes (first revision) (withdrawn)
213 4 IS 7270:1974 Bright bars (standard quality) (Withdrawn) (Superseded by IS
9550:1980)
214 4 IS 7271:1974 Bright bars (ordinary/commerical quality) (withdrawn) (Superseded by
IS 9550)
215 21 IS 7281:1974 Code of practice for immersed ultrasonic testing by the reflection
method usingpulse longitudinal waves (Withdrawn) (Superseded by IS
3664)
216 4 IS 8051:1976 Steel ingots and billets for the production of volute, helical and
laminated springs for automotive suspension
217 4 IS 8053:1976 Steel ingots and billets for the production of steel wire for the
manufacture of wood screws
218 4 IS 8054:1976 Steel ingots and billets for productionjof laminated springs (railway
rolling stock) (superseded by IS 8052:1990)
219 4 IS 8055:1976 Steel ingots and billets for the production of spring washers
220 4 IS 8056:1976 Steel ingots and billets for the production of hard drawn steel wire for
upholstry springs
221 4 IS 8057:1976 Steel ingots and billets for the production of wire rod for the
manufacture of machine screws (by cold heading process)
222 3 IS 8285:1976 Method for tensile test of copper and copper alloy rolled flat product
(thickness less than 2.5 mm) (Superseded by IS 1608:1995)
223 4 IS 8500:1991 Structural steel - microalloyed (medium and high strength qualities)
(first revision)
118
Sl. No. Committe No. IS No./ DOC Number Title
224 10 IS 8844:1978 Guidelines for marking purity of gold on gold articles/ornaments
(Superseded byIS 1417:1999)
225 4 IS 9025:1993 Single cold reduced tinplate and single cold reduced black plate
electrolytic tinplate coil and blackplate coil for subsequent cutting into
sheet form (first revision)
226 3 IS 9258:1979 Method for vickers micro-hardness testing of metals [(Superseded by
IS 1501(Part 3:1984)]
227 21 IS 9346:1979 Recommended practice for certification of NDT personnel for ultrasonic
examination (Superseded by IS 13805:1993)
228 4 IS 9467:1980 Steel ingots and billets for production of rivet bars for structural
purposes
229 4 IS 9468:1980 Steel ingots and billets for production of mild steel rivet bars for ship
building
230 4 IS 9477:1980 Steel ingots and billets for hot rolled bars for the production of bright
bars
231 14 IS 9731:1980 Steel castings for general engineering purposes (Withdrawn)
232 2 IS 10113:1982 Recommended practice for calibration of emulsion for photographic
photometry (withdrawan)
233 25 IS 10441:1991 Mettalic powders- Determination of apparent density- oscillating funnel
method (first revision) (Withdrawn)
234 3 IS 10588:1983 Tables of Brinell hardness values for use in test made on flat surfaces
235 4 IS 10723:1983 Aluminium silicon bronze rods and bars
236 4 IS 10789:1984 Hot rolled micro alloyed steel plate sheet and strip for manufacturers
of low liquifiable gas cylinders (Superseded by IS 6240:1999)
237 30 IS 10812:1992 Classification of sponge iron/direct reduced iron (DRI) fines/briquettes
for steel making (first revision) (Superseded by IS 15774:2007)
238 3 IS 10927(Part 1):1984 Tables of Vickers hardness values for use in tests made on flat
surface Part 1 HV 5 to HV 100
239 3 IS 10927(Part 2):1984 Part 2 HV 0.2 to less than 5
240 3 IS 10927(Part 3):1991 Part 3 Less than HV 0.2
241 7 IS 11040:1984 Dimensions for wrought aluminium and aluminium alloys,welded tube
(withdrawn)
242 32 IS 11258:1985 10- and 20 kg square tins for vanaspati ghee and edible oils
(Withdrawn)
243 25 IS 12216:1987 Tantalum cavbide powder (withdrawn)
244 25 IS 12217:1987 Niobium carbide powder (withdrawn)
245 30 IS 13839:1993 Specification for sponge iron/direct reduced iron (DRI) fines/briquettes
for steel making (Superseded by IS 15774:2007)
246 30 IS 13905:1993 Hot briquetted sponge iron (HBI) for steel making (superseded by
IS 15744:2007)
247 4 IS 13954:1994 Double cold-reduced electrolytic tinplate sheet
248 4 IS 13955:1994 Double cold reduced electrolytic tinplate coil for subsequent cutting
into sheets
249 9 IS 13982:1994 Zinc Alloy for Hot Dip Coatings- Zinc-5 Percent Aluminium- Mischmetal
Alloy- Specification
250 30 IS 14373:1996 Determination of sticking of iron ores used in direct reduction by gaseous
reducing agent (superseded by 12929:2007)
251 15 IS 14374:1996 Refractories for chimney-Recommendation
252 30 IS 14405:1996 Determination of disintegration of DR feedstock (iron ore and pellets) using
gaseous reductants in a shaft reactor (superseded by IS 12929:2007)
253 15 IS 14406:1996 Refractories for forge and heat treatment furnaces-Recommendation
253 30 IS 14718:1999 Method for determination of impact index of HBI
119
ANNEX III
LIST OF INDIAN STANDARDS, NUMBERS AND VALID LICENCES COVERED UNDER CERTIFICATION
AS ON 1 APRIL 2010
(Product wise Alphabetically )
Sl. IS No. Title of the Specification No. incences
No.
________________________________________________________________________________________
Alloy Steels and Forgings Sectional Committee- MTD 16
1. 1875:1992 Carbon steel billets, blooms, slabs and bars for 5
forgings
2. 2004: 1991 Carbon steel forgings for general engineering 1
purposes
3. 4432:1988 Case hardening steel 1
4. 5517:1993 Steels for hardening and tempering 1
Corrosion Protection and Finishes MTD 24
5. 1337:1993 Electroplated coatings of hard chromium 1
on iron and steel
Ferrous Castings:
Cast Iron- MTD 6
6. 1536:2001 Pressure pipes for water gas and sewage-
centrifugally cast (spun) iron pipes 10
7. 1537:1976 Vertically cast iron pressure pipes for water, gas, 2
sewage
8. 1538:1993 Cast iron fittings for pressure pipes for water, 13
gas sewage
9. 1729:2002 Cast iron/ductile iron drainage pipes and pipe fittings 35
for over ground non pressure pipeline socket and spigot
series
10. 1879:1987 Pipe fittings Malleable cast iron 134
11. 3989:1984 Centrifugally cast (spun) iron spigot and socket 11
soil, waste and ventilating pipes, fittings and
accessories
12. 5531:1988 Cast iron specials for asbestos-cement 7
pressure pipes for water, gas and sewage
13. 7181:1986 Cast iron double flanged pipes for water, gas and 20
Sewage Horizontally
14. 8329:2000 Centrifugally cast (spun) ductile iron pressure 5
pipes for water, gas and sewage
15. 8794:1988 Pipes (pressure)- cast iron detachable joints for 40
use with asbestos cement
16. 9523:2000 Ductile iron fittings for pressure pipes for water, gas 13
and sewage
17. 13382:2004 Cast iron specials for mechanical & push on
flexible joints for pressure pipes lines for water, gas 1
and sewage
18. 13502:1992 Pig iron 1
120
Metal Containers MTD 32
19. 916:2000 Tins 18 litre square 7
20. 1783(Pt. 1) Drums, large, fixed ends grade A drums 25
1993
21. 1783(Pt. 2) Drums, large, fixed ends grade B drums 33
1988
22. 1784:1998 Closures (screwed) for drums 3
23 2552:1989 Drums (steel) (galvanized and ungalvanized) 2
24. 3575:1993 Drums Bitumen 26
25. 9396(Pt. 1) Open top sanitary cans (round) for processed 1
1987 foods Tinplate requirements
26. 10325:2000 Square tins 15 kg for ghee, vanaspati, edible 12
oils and bakery shortenings
27. 13997:1994 Drums, large open top 13
Non Ferrous Metals and Their Alloys:
Copper and Copper Alloys MTD 8
28. 410:1977 Copper alloys brass Cold rolled sheet, 1
strip and foil
29. 1897:1983 Copper strips for electrical purposes for ETP
Grade of (A) thickness 1 mm to 10 1
30. 7452:1990 Hot rolled steel sections for doors, windows &
ventilators 8
Light Metals and their alloys, MTD 7
31. 21:1992 Wrought Alloys and its alloys sheets and 1
strip for utensils
Precious Metals MTD 10
32. 1417:1999 Gold and gold alloys Jewellery artefacts 7248
fineness and marking
33. 2112:2003 Grades of silver and silver alloys (first revison) 498
Steel Tubes, Pipes and Fittings, MTD 19
34. 1161:1998 Structural purpose steel tubes 93
35. 1239(Pt 1): Mild Steel tubes, tubular and other wrought 121
:2004 steel fittings
36. 1239(Pt 2): Mild Steel tubes, tubular and other wrought 15
:1992 steel fittings- Mild steel tubular and other
wrought steel pipe fittings
37. 1978:1982 Line pipes 15
38. 3589:2001 Water, gas and sewage steel pipes( 168.3 to 80
2032mm (OD) seamless or electrically welded
39. 3601:2006 Steel tubes for mechanical and General Engineering 39
purposes
40. 4270:2001 Steel tubes used for water wells 36
41. 4923:1997 Hollow steel sections for structural use 30
42. 5504:1997 Spiral welded pipes 10
43. 6392:1971 Steel pipe flanges 6
121
44. 9295:1983 Idlers for belt conveyers steel tubes 22
45. 10577:1982 Lancing pipes 1
46. 11722: 1986 Thin walled flexible quick coupling 1
pipes
Steel Castings, MTD14
47. 276:2000 Austenitic Manganese Steel Castings 1
Welding MTD 11
48. 814:2004 Covered electrodes for manual metal arc welding 142
of carbon and carbon manganese steels
49. 6901:1988 Pressure regulators for gas cylinders used in 9
welding cutting and related processes
50. 7653:1975 Manual blow pipes for welding and cutting 7
Wrought Steel-MTD 4
51. 277:2003 Galvanized steel sheets (plain and corrugated) 34
52. 280:2006 Mild steel wire for general engineering purposes 23
53. 513:1994 Cold rolled low carbon steel sheets and strips 11
54. 648:2006 Non oriented electrical steel sheets and strips 3
for magnetic circuits
55. 1079:1994 Hot rolled carbon steel sheet and strip 8
56. 1993:2006 Single cold-reduced tinplate and single cold 3
reduced block plate electrolytic and hot dipped
tinplate sheet and black plate sheet
57. 2002:1992 Steel plates for pressure vessels for intermediate 6
and high temperature service including boiler
58. 2062:2006 Steel for general structural purposes 248
59. 2830:1992 Carbon steel cast billet ingots, billets,blooms and 277
and slabs for re-rolling into steel for general
structural purposes
60. 2831:2001 Carbon steel billets, blooms and slabs for re-rolling 54
into structural steel (ordinary quality)
61. 2879:1998 Mild steel for metal arc welding electrode core wire 9
62. 3502:1994 Steel chequered plates 2
63. 3975:1999 Mild steel wires, formed wires and tapes for 26
armoring of cables
64. 4454(Part 1) Steels wires for cold formed springs 2
2001
65. 5872:1990 Cold rolled steel strips (box strapping) 2
66. 5986:2002 Hot rolled steel plates, sheets, strips and flats 8
for flanging and forming operations
67. 6240:2008 Hot rolled steel plate (upto 6 mm)sheet and strip 7
for manufacture of low pressure liquifiable gas
cylinder
68. 7283:1992 Hot rolled bars for production of bright bars and 1
mechanical parts for engineering purposes
69. 7887:1992 Mild steel wire rods for general engineering 14
purposes
70. 10748:2004 Hot rolled steel strips for welded tubes and pipes 15
71. 11513:1985 Hot rolled carbon steel strip for cold rolling
purposes 6
122
72. 14650:1999 Carbon steel cast billet, ingots, billet, blooms & 20
slabs for re-rolling purpose
73. 15391:2003 Cold rolled non-oriented electrical steel and strip 2
Delivered I semi-processed state
74. 15647:2006 Hot rolled steel narrow strip for welded tubes & pipes 2
123
ANNEX IV
ISO TECHNICAL COMMITTEES DEALT BY METALLURGICAL ENGINEERING DEPARTMENT
ISO TC TITLE INDIAS MEMBER
BODY STATUS
5 FERROUS METAL PIPES AND METALLIC FITTINGS P
SC 1 Steel Tubes P
SC 2 Cast Iron Pipes, Fittings and Their Joints P
SC 5 Threaded or Plain and Butt Welding Fittings Threads P
Gauging of Threads
SC 10 Metallic flanges and their joints O
SC 11 Metal hoses and expansion joints O
17 STEEL P
SC 1 Methods of determination of chemical composition O
SC 3 Steel for Structural Purposes P
SC 4 Heat Treatable and Alloy Steel O
SC 7 Method of Testing (Other than Mechanical Tests
And Chemical Analysis)
SC 9 Tinplate and blackplate P
SC 10 Steel for Pressure Purposes P
SC 11 Steel Castings P
SC 12 Continuous Mill Flat Products P
SC 16 Steels for Reinforcement and Pre Stressing of concrete O
SC 17 Steel Wire Rod and Wire Products P
SC 19 Technical Delivery Condition for Steel Tubes
For Pressure Purposes P
18 ZINC AND ZINC ALLOYS O
25 CAST IRON AND PIG IRON P
SC 1 Malleable Cast Iron P
SC 2 Spheroidal Graphite, ferritic-perlitic and austenitic cast
Iron P
SC 3 Grey Cast Iron (revision ISO/R 185 P
26 COPPER AND COPPER ALLOYS O
33 REFRACTORIES P
44 WELDING AND ALLIED PROCESSES O
SC 3 Welding consumables O
SC 5 Testing and Inspection of Welds P
SC 6 Resistance welding P
SC 7 Representation and terms O
SC 8 Equipment for gas welding, cutting and allied processes O
124
SC 10 Unification of Requirements in the Field of O
Metal Welding
SC 12 Soldering and brazing materials O
52 LIGHT GAUGE METAL CONTAINERS O
SC 4 Open top containers O
SC 5 General use containters O
SC 6 Aerosol containers O
67 MATERIAL, EQUIPMENT AND OFFSHORE STRUCTURES FOR P
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
SC 2 Pipeline transportation system P
SC 5 Casing tubing & drill pipe P
79 LIGHT METALS AND THEIR ALLOYS O
SC 1 Methods of chemical and spectro-chemical analysis O
SC 4 Unalloyed (refined) aluminium ingots O
SC 5 Magnesium and alloys of cast or wrought magnesium O
SC 6 Wrought aluminium and aluminium alloys P
SC 7 Aluminium and cast aluminium alloys O
SC 9 Symbolization O
SC 11 Titanium O
102 IRON ORES P
SC 1 Sampling P
SC 2 Chemical Analysis P
SC 3 Physical Testing P
107 METALLIC AND OTHER INORGANIC COATINGS O
119 POWDER METALLURGY` P
129 ALUMINIUM ORES O
132 FERRO ALLOYS P
135 NON-DESTRUCTIVE TESTING P
SC 2 Surface method P
SC 3 Acoustical method P
SC 4 Eddy current methods P
SC 5 Radiaton methods P
SC 6 Leak detection methods P
SC 7 Personnel qualification P
SC 8 Infrared thermography for NDT P
SC 9 Acoustic emission testing P
155 NICKEL AND NICKEL ALLOYS O
156 CORROSION OF METALS AND ALLOYS O
125
164 MECHANICAL TESTING OF METALS O
SC 1 Uniaxial testing P
SC 3 Hardness testing P
Sc 4 Toughness testing Fracture (F), Pendulum (P), Tear (T) P
174 JEWELLERY P
175 FLUORSPAR O
183 COPPER LEAD AND ZINC ORES AND CONCENTRATE O
196 ORNAMENTAL ROCKS O
201 SURFEROUS CHEMICAL ANALYSIS O
202 MICROBEAN ANALYSIS O
229 NANOTECHNOLOGIES P
126
ANNEX-V
IS 21 :1992 | ~
( H)
IS 279 :1981 |
( H)
IS 1148 :1982 | ! ~ 40
IS 1149 :1982 |
IS 1417 :1999 /~ P (
H)
IS 1990 :1973 | | ( H)
IS 4368 :1967 = | | | ~
IS 4430:1979 ( H)
IS 4431 :1978 - ( H)
IS 4432 :1988 ( H)
IS 4882 :1979 4 | ~
( H)
IS 5489 :1975 4 ( H)
1110 : 1990 ( H)
12908: 1990 ~