Scribd Logo
Hochladen

Welcome to Scribd!

  • Steam Tracing Specification

    Uploaded by

    gpskumar22
    149 views1 page
    This document provides specifications for steam tracing systems, including: - Standard sizes and materials for steam tracers based on process line size and temperature. - Allowable lengths of efficient and total tracer runs based on process line size. - Notes that the basis is low pressure steam at 6 bar and 175°C, with a minimum ambient of 5°C, and insulation meeting thermal insulation specifications. Carbon steel piping will be used for tracer lines and connections per piping material specifications. The maximum pocket depth is 2000mm.

    Original Description:

    1

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for steam tracing systems, including: - Standard sizes and materials for steam tracers based on process line size and temperature. - Allowable lengths of efficient and total tracer runs based on process line size. - Notes that the basis is low pressure steam at 6 bar and 175°C, with a minimum ambient of 5°C, and insulation meeting thermal insulation specifications. Carbon steel piping will be used for tracer lines and connections per piping material specifications. The maximum pocket depth is 2000mm.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    149 views1 page

    Steam Tracing Specification

    Uploaded by

    gpskumar22
    This document provides specifications for steam tracing systems, including: - Standard sizes and materials for steam tracers based on process line size and temperature. - Allowable lengths of efficient and total tracer runs based on process line size. - Notes that the basis is low pressure steam at 6 bar and 175°C, with a minimum ambient of 5°C, and insulation meeting thermal insulation specifications. Carbon steel piping will be used for tracer lines and connections per piping material specifications. The maximum pocket depth is 2000mm.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as pdf or txt
    of 1

    http://www.inspection-for-industry.com/steam-tracing-specification.

    html
    APPENDIX A

    Tracer Size

    Number of
    Tracers

    Tracer Size

    Number of
    Tracers

    Tracer Size

    Number of
    Tracers

    Tracer Size

    Number of
    Tracers

    95C

    Number of
    Tracers

    80C

    Tracer Size

    65C

    Number of
    Tracers

    50C

    Tracer Size

    35C

    Number of
    Tracers

    20C

    3/8

    3/8

    3/8

    3/8

    3/8

    3/8

    <1 3/8

    Tracer Material

    Maintain Temperature
    5 C
    Tracer Size

    Process Line Size

    Standard Sizes, Numbers, Materials and Allowable Length of Tracers


    (Low Pressure Steam)

    ASTM B68
    Wall THK.
    0.86mm

    Tracer Length
    In Process Units

    In Interconnecting
    Pipe racks, Pipe ways,
    Tank Areas

    Efficient
    Max.
    Length
    (m)

    Total Max.
    Length from
    Lead Block
    Valve
    To
    Tail Block
    Valve
    (m)

    Efficient
    Max.
    Length
    (m)

    Total Max.
    Length from
    Lead Block
    Valve
    To
    Tail Block
    Valve
    (m)

    35

    +2x10=55

    50

    +2x10=70

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    10

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    12

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    14

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    16

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    18

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    20

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    24

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    28

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    30

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    32

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    34

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    36

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    38

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    1/2"

    50

    +2x15=80

    70

    +2x15=100

    Carbon steel Pipe as per piping class ASA2 of


    Engineering Specification for Piping Material

    Appendix A Notes:
    1)

    2)

    4)

    Basis of Sizing:
    a) Low pressure steam 6.0 Bar / 175C.
    b) Minimum ambient temperature = 5C.
    c) Insulation thickness & material as per Engineering Specification for Thermal Insulation.
    Steel pipe shall be used for tracing line from manifold to tracers, interconnecting lines between two
    parts of a tracer, which are not adjacent and from tracer through trap to condensate manifold in
    accordance to Engineering Specification for Piping Material.
    Maximum depth of pocket shall be 2000mm.

    You might also like