Reshade Manual
Reshade Manual
Inhalt
Introduction
The User Interface
Getting Started
Important Notes
Specific Settings
Introduction
Reshade offers high-quality photo resizing for your computer. Enlarge images without the usual
blur, jagged edges, halos, loss of sharpness or detail associated with image upscaling. Create
accurate, crisp clear, and photorealistic enlargements at almost any zoom factor.
Minimum System Requirements
Microsoft Windows XP or newer
128 MB RAM
100 MB free hard disk space
Easy-to-use self-adjusting settings, quick previews, keyboard shortcuts, and drag-and-drop
functionality make the Reshade photo enlargement application the perfect choice for beginners and
experts alike. Resize images in many file formats including jpeg, tiff, png, and bmp. Adjusting your
images for print is easy! Reshade includes support for most image modes including CMYK. The
following sections of this manual are geared towards the seamless installation and utilization of the
Reshade application. Please note the minimum requirements before moving on to the Application
Setup section. The remaining sections of the quick guide highlight the procedure to enlarge images.
Application Setup
To install the application, download the application installer from our website http://reshade.com/ .
Click on the Run option and then follow the on-screen instructions. When the installation is
complete, you will be prompted to run the application. A shortcut is created in Start->Programs for
access to the Reshade Image Enlarger application at any time.
12.Pan Rectangle: Used on the right panel to control the area shown on the left panel when the
required image width or height is larger than the left panel. The size of the pan rectangle
depends on the required image size and the left panel size.
13.Feedback: Opens a link to the contact page of reshade.com so that the user can provide
feedback, report bugs etc.
14.Restore Default: Restores Denoise, Texture, Reduce Artifacts, Accuracy and Control back
to factory settings
15.Advanced Option Tab: Switch to this tab to see change advanced settings.
16.JPEG Compression: Sets the compression rate for JPEG format. Default is 90%.
17.Processing Fidelity: select higher quality resizes vs. faster processing. When Best Edges
is enabled:
No local color shifts caused by extreme settings are visible even at large zooms
More precise edge detection takes place
18.Smooth Gradients: Select what kind of contours will be affected most by the Control
setting on Main Options. Lower values will affect all contours, both weak and strong ones,
while higher values will be selective to strong contours only. Use this setting when you find
yourself having problems with out of focus regions of a photo for example.
19.Program Settings: When selected, the Reset Options feature automatically resets all the
options to their default values every time you exit Reshade. If unchecked, most settings will
be saved on exit.
20.Restore All Defaults: Changes almost all settings (even including window position) to
factory defaults.
Menu Overview
The Reshade menu bar allows you to open/save files, find product related help, update and change
interface language
The Open and Save options will function the same as their corresponding buttons
Exit closes the application
The Enable Auto Updates if checked, will automatically search for updates every time
Reshade is launched
Check for Update will instantly check for updates
Language lets the user to choose any preference language from a list of supported languages
About provides application version information for Reshade
User Manual opens this user manual using your default browser
Getting Started
Getting started with the Reshade Image Enlarger application is easy. There is a 3 step process to
working with image files:
Opening an Image
1. Click on the Open button or Choose File->Open from the menu
2. Drag and drop files (from Windows Explorer or your internet browser)
3. Use the keyboard shortcut: CTRL-O
Start with the Pixel Dimensions section of the User Interface. The image width and height
can be changed by one of the following methods:
1. Typing the new value in the Width and Height field
2. Scrolling the mouse while the cursor is in the field
3. Dragging the label
Next, the image resolution can be changed by either:
1. If the Constrain Proportions checkbox is selected, the width and height ratio of the
cropped area will be maintained.
2. If the lock/unlock button is in lock state and Constrain checkbox is unselected, the
width and height ratio of the crop rectangle will not be maintained. However, the
value of the width and height (shown on document size panel) will be revised
automatically to keep the image outstretched.
3. To center the cropped area, select the Constrain checkbox and click on the Center
button. To reset the cropped area, unselect the Constrain checkbox and click on the
Reset button.
Note: Alternatively, you may type in the crop rectangle size by right-click inside the right
panel. A small window will be shown so the user can enter both width and height values.
For the remaining Reshade Image Enlarger features, use the slider bars. For more precise
control, use up/down arrows when the slider is selected. Enter values in the corresponding
text-fields.
Note: You may use decimals for the zoom value. See the Information About Specific Reshade
Settings section for more details.
Saving an Image
Click on the Save button or Choose File->Save from the menu
Use the keyboard shortcut: CTRL-S
The Batch
1. Input Files
multiple files from different folders by clicking on Open button again and browse to different
folders. Alternatively, you may drag and drop multiple images onto the image list in the Reshade
application. Note: If an image path is repeated, the image will be ignored. To remove selected
images from the list, use the delete button on the left side of the image list or press the delete button
on the keyboard. You can also use CTRL, CTRL-A or SHIFT to select multiple images in the list.
Only the image name will be shown on the image list. This is because the full path maybe too long
to be shown. If the user selects an image, the full path will be shown on the status panel. To preview
an on the list, click on it and it will be displayed in the preview panel on the right. If the user double
clicks an image or press enter while only one image is selected, it will be loaded on Reshade. In this
case, user-defined crop cannot be enabled; however, it does perform center crops.
2. Destination
3. Resizing options
There are
Output Size. Displays frame size in which the resized images will be fitted.
Lock Final Size. Lock all images to the same size as the current image.
Lock Zoom. Lock the zoom and allow all images to be scaled the same way.
Stretch/Center Crop. The Stretch selection allows the image to be stretched. The Center
Crop selection allows the image to be cropped in the center. Only one option may be
selected. A user-defined crop region cannot be set when using the Batch Processing function.
After the resizing options are chosen, click on the Run Batch button to process the selected images.
Batch Processing Example
To use the Batch Processing feature on a group of images, follow the example below.
1. Click on the Main Options tab
2. Select the Screen Resolution if the pixels unit was chosen or Frame Size if the other units
were chosen from the drop down menu (for example 1024768)
extension.
7. Click on Lock Final Size option under Output Size. All of the images selected will be
resized to the Screen Resolution or Frame Size selected on the Main Options tab.
Important Notes
Saved images may appear not to be zoomed. If this happens, try opening the image at actual
pixels/full size/100% zoom in your favorite image viewer. These programs try to fit the image to
your screen by default, thus shrinking it. An enlarged image using the default settings is almost
identical to the original when down-sized again.
Quick preview
Clicking and holding the left mouse button on any of the image panes will show a fast preview of
the zoomed image (using the simplest resizing method available). This is NOT what the saved
image will look like. The reshaded version will be shown after releasing the mouse button.
Longer delays
With some settings there will be a significant delay in processing the image so the preview will not
be refreshed instantly. A progress bar will be displayed at the bottom of the screen.
The time needed to save an image is greatly dependent on the settings used. The most time
consuming options are zoom and Processing Fidelity. The greater the values for these the longer it
will take. Also, selecting Best Edges will double the processing requirements.
Supported sizes for ICON and CURSOR images
When saving ICO and CUR files, the minimum size supported by Reshade is 88 pixels. The
maximum width is 255 pixels and maximum height is 127 pixels.
Specific Settings
Denoise
Electronic noise may be present in a digital image. The Denoise feature reduces the amount of
electronic noise and smoothes out the image. The default value for Denoise is 0 and may be
increased to 100, depending on how much smoothing is desired for the result.
Zoom 480% all other options are set to default or disabled respectively.
Reduce Artifacts
The Reduce Artifacts feature further reduces the amount of electronic noise and smoothes out the
image.
Accuracy
The accuracy setting influences how close in similarity the resized image is to the original. Lower
values will allow Reshade to create smoother curves at the cost of precision. At large image sizes,
generally its better to use smaller accuracy. This creates realistic transformations with little loss of
precision.
Smooth Gradients
Sometimes gradients in the image become less smooth. Try increasing Smooth Gradients to
remove this kind of problems. Large values will keep the soft edges as they are and only sharpen
the strong ones.
Texture
The Texture feature sharpens the resized image.
Control
The Control feature sets the degree at which the image is transformed. Higher values create sharper
and more clear edges but with more distortion. Auto adjust picks the right values for you usually,
if you want to tweak to perfection or get some artistic effects, uncheck this setting and adjust the
Control slider manually.