Vdo Sensors
Vdo Sensors
This spreadsheet contains 4 sections - one for each of the VDO sensors that Westfield supply. Each sensor has the
resistance values plotted throughout its temperature/pressure range, and the voltage is calculated for you.
The spreadsheet assumes that each sensor uses the DASH2 5v reference, and the 910ohm resistors already supplied
within the Westfield loom. If you have altered or changed either of these for a particular sensor then simply change the
value of either at the top of the sensor's page, and the new voltages will be automatically calculated ready for you to
paste into the DASH2 software.
Oil Pressure Scale
Voltage (V): 5
Fixed Resistor (W) 910
Tabe 1
Volts: Temp C R/Ohm:
4.651937 -40 12162.35
4.659163 -35 12439.50
4.547017 -30 9134.53
4.407126 -25 6764.48
4.238825 -20 5067.60
4.040872 -15 3833.89
3.815073 -10 2929.90
3.559871 -5 2249.44
3.285057 0 1743.15
2.999182 5 1364.07
2.708536 10 1075.63
2.132865 20 676.95
1.627856 30 439.29
1.212941 40 291.46
1.041964 45 239.56
0.890869 50 197.29
0.753458 55 161.46
0.641888 60 134.03
0.556467 65 113.96
0.481853 70 97.05
0.414970 75 82.36
0.357711 80 70.12
0.307972 85 59.73
0.266383 90 51.21
0.232207 95 44.32
0.202800 100 38.47
0.177019 105 33.40
0.155039 110 29.12
0.136447 115 25.53
0.120329 120 22.44
0.106211 125 19.75
0.094022 130 17.44
Oil Temperature Scale
Voltage (V): 5
Fixed Resistor (W) 910