Broward County Schools AP Physics 1 Review
Broward County Schools AP Physics 1 Review
AP Physics 1
Review
1
AP Physics 1 Review
Important info:
No penalty for guessing. Eliminate one or two choices and then take a shot.
Multi-select questions with two answers, which must be selected to receive credit.
Allowed to use the reference sheet and calculator for both parts of the exam.
Time is important, so do not spend too much time on any one question.
Use g = 10 m/s2 to make calculations easier and the numbers work out better
Don’t go crazy with sig figs and keep in mind precision/error on lab questions
2
2. Graphing and Labs
On graphing lab questions, manipulate the data given using a physical law, if possible
If you have no clue, just try squaring one column and keep moving forward
Always label axes with variables and units
When finding slope from a best fits line, do NOT use data points unless you have to
The slope can be used to find physical quantities, if you know the right formula
There are many easy points to be had on graphing questions
Best fits line estimation makes an excellent error analysis if you can’t think of one
3
3. Kinematics
Position-Time Graphs – Represent 1-D motion with velocity as slope
Velocity-Time Graphs – Represent 1-D motion with acceleration as slope and displacement
as area under the curve (both above and below axis)
Displacement (meters) x x f x i
x
Average Velocity (meters/second) v
t
v
Acceleration (meters/second2) a
t
Problems in Algebra based physics will have constant acceleration, or should be broken into
a series of constant acceleration parts
We can derive important equations from three small ones
x vi v f v
o v v a (for constant acceleration)
t 2 t
The important thing about these equations is defining your given information correctly, and
units help quite a bit in this regard
o v f vi a t 1 2
o x v i t a t
o x v i v f t
1 2
2 o v f v i 2 ax
2 2
4
4. Projectiles
Draw a quick sketch
This motion is parabolic, and the path is referred to as the trajectory
Horizontal (forward) velocity is CONSTANT! (if there’s no air resistance)
Vertical and horizontal motion is INDEPENDENT!
Horizontal Launch
o Initial velocity in vertical direction is ZERO m/s!
o Make two columns of given info (displacement, velocity, acc)
o Vertical ( y, v y,i 0, ay 10 ) and Horizontal ( x, v x,i v i , ax 0 )
o Use the same kinematic equations from above, with the given info
o Use the column with more info to find time in the air
o Use time in the air with info from other column
to find answer
Vertical Launch
o Given launch velocity (v) and angle with horiz (), v y,i v sin and v x,i v cos
o If it lands on level ground (same height as launch), v y, f v sin
o Velocity at top (apex) is NOT zero, but v y,top 0 and v x,top v cos (max height)
o Most of the time, find the time in the air, and use that tohelp find the answer
5
5. Force and Newton’s Laws
Newton’s 1st Law – Law of Inertia
o Inertia is the tendency of an object to remain in its state of motion
o Objects in a state of equilibrium remain that way, unless acting on by an unbalanced
force
Newton’s 2nd Law – F = ma
o Acceleration is directly related to force, and inversely related to mass
Newton’s 3rd Law – Interaction Pairs
o When an object exerts force on a second object, the second object simultaneously
exerts an equal force on the first, in the opposite direction
o Two forces are involved, acting on separate objects – never on a single one
Always, always draw a FBD, to scale if possible. Label forces with distinguishing names.
Use your FBD to write a net force equation, or two for 2-D problems
o If it’s Equilibrium, set F = 0
o If it’s Accelerated motion, set F = ma
When making net force equations, do forward forces minus backward forces, no matter the
direction
Frame of reference is important:
o Most questions are done with vertical and horizontal components
o But on ramps, it makes sense to do parallel and perpendicular to the ramp
o On circular motion problems, radial and tangential makes more sense
o In general, put direction of travel, or acceleration, on one axis to make math easier
Weight or Force of Gravity (Newtons)
o Draw and label this first o Fg mg
Normal Force (Newtons)
o Sometimes opposite the weight, but it’s always perpendicular to the surface
Friction (Newtons)
o Opposes motion
o Coefficient of friction is unit-less and between 0 and 1
o Static friction can be anything from zero to Fs,max sFN , but is never greater than
forward (applied) force
o Kinetic friction ( Fk k FN ) can be greater than forward (applied) force, in which
case the object is slowing down
Systems Approach
o On certain questions, with multiple objects in motion together, like blocks in contact
or Atwood’s machine, it makes sense to think of the total net force (driving force)
divided by total mass to get acceleration
Centripetal Force (Newtons)
o Left on their own, objects in motion will move in a straight line, as described by
Newton’s 1st Law. So an object moving in a circle must have a force keeping it on its
circular path. Whatever that force is, it’s directed toward the center of the circle
and is referred to as the centripetal force.
o Many forces can play the role of the centripetal force: Tension, Gravity, Normal,
Friction, Magnetic, or any combination
mv 2
o The net force directed towards the center is the centripetal force, Fc
r
o If centripetal force is removed, object moves in a straight line, tangent to the circle
6
7
6. Work, energy, conservation of energy, power
Work, energy and power are all scalar quantities
Work (Joules)
o When a force is exerted, making an object move, then work is done
o Only the component of the force in the direction of movement does work
o W Fdcos if the angle is between force and displacement
Kinetic Energy (Joules)
o Energy of moving object o K 12 mv 2
Work – (Change in) Kinetic Energy
o Derived from kinematics o If W > 0, object is speeding up
o W K 2 mv f 2 mv i
1 2 1 2
o If W < 0, object is slowing down
o This relationship is useful o If W = 0. object moving at constant speed
Gravitational Potential Energy (Joules)
o Energy related to position in a gravitational field o Ug mgh
o Work done by the field is opposite the change in potential energy W g Ug
Elastic Potential Energy (Joules)
o Energy stored in elastic systems o U sp 12 kx 2
o Work done by the spring is opposite the change in potential energy Wsp Usp
Conservation of Energy
o Mechanical Energy (no friction) K i Ui K f U f
o If object starts at rest and ends at zero level v 2gh
o Work done by non-conservative force Wnc K U (K f U f ) (K i Ui )
Average Power (Watts)
o Rate at which work or energy is done o W
Pavg Pavg Fv
t
8
7. Impulse, momentum, collisions
Linear momentum (kgm/s) is a vector
o Depends on an object’s mass and velocity o p mv
Impulse (kgm/s) is a vector
o Has to do with the time a force is applied to an object, causing a change in momentum
o Can be found as the area under a force-time graph
o J Fnet t p mv f mv i
o If you increase the time for an object to slow down, you decrease the force on object
Conservation of momentum
o Works when no external forces act on system o m1v1,i m2v 2,i m1v1, f m2v 2, f
Collisions
o Recoil – both objects begin together at rest and move apart m1v1, f m2v 2, f
o Perfectly Inelastic – objects collide and stick together m1v1,i m2v 2,i (m1 m2 )v f
o Elastic – objects collide and separate with KE conserved m1v1,i m2v 2,i m1v1, f m2v 2, f
o Most real-life collisions are neither elastic nor perfectly inelastic,
but simply inelastic
o For collisions at an angle (glancing), use components and handle each axis separately
8. Orbital Mechanics
Kepler’s Laws of Planetary Motion
o 1st Law – All planets move in elliptical orbits with the Sun at one focus of ellipse
While elliptical, these orbits are very nearly circular (doesn’t effect seasons!)
Exact right speed and distance are needed for a circular orbit (man-made objects)
o 2 Law – A line connecting the planet to the Sun sweeps out equal areas in equal time
nd
The important implication is that planets move at different speeds during orbit
Faster when closest to Sun (perihelion), slower when farthest (aphelion)
o 3 Law – For every planet in our Solar System, the square of the period (time for one
rd
9
9. Rotational motion
Center of mass is the point where an object will balance
o Can be found experimentally by hanging the object from two spots, drawing vertical
lines from the point of attachment, and looking for an intersection. Or balancing it on a
fulcrum (pivot point).
o Can be found mathematically by summing the product of a mass and its position on an
∑ 𝑥∙𝑚
axis, then dividing by the total mass 𝑥𝑐𝑜𝑚 = 𝑀
Moment of Inertia is a measure of how hard or easy it is to change the rotation of an object
o It’s all about mass distribution o Unit is kg·m2
o The closer the mass is to the axis of rotation, the lower the moment
o The farther out the mass is from the axis, the higher the moment
1 2
o For point masses, I = m · r2 o Ihoop = MR2 > Idisc = 2 MR2 > Isphere = 5 MR2
o If a hoop, disc and sphere have the same Mass and Radius, and are released from rest at
the top of a ramp, the sphere makes it to the bottom first because of its lower moment
Different points on a rotating object have different tangential displacements, velocities and
accelerations, but the same angular displacements, velocities and accelerations. The equations
below are vitally important to linking the worlds of linear and rotational motion together.
Every rotational variable has a corresponding linear one. Learn the relationships and cut the
number of formulas you need to memorize in half!
Angular displacement, speed and acceleration Rotational to Linear Motion
o Angular displacement (radians) f i x r
o Angular speed (rad/s) v r
t
o Angular acceleration (rad/s 2)
a r
t
Torque is the ability of a force to cause rotation
o In rotation problems we look at the sum of torque (not the sum of force). But it is
exactly the same methodology.
o 𝜏 = 𝐹𝑟𝑠𝑖𝑛𝜃 where θ is the angle between the Force and the radius
o However, most students are not careful about the angle, so use the perpendicular
component of the Force (sin or cos) no matter the angle given 𝜏 = 𝐹⊥ 𝑟
o Strongest when the force is perpendicular to the lever arm (since sin 90⁰ = 1).
o Equilibrium means all forces and torques are balanced ∑ 𝐹𝑥 = 0 ∑ 𝐹𝑦 = 0 ∑ 𝜏 = 0
o If clockwise and counterclockwise torques do not balance, rotation is accelerated
For Net Force we did “Forward – Backward” – it’s the same thing here.
𝐹 = 𝑚𝑎 is Newton’s 2nd Law, so 𝜏 = 𝐼𝛼 is Newton’s 2nd Law of Rotational Motion
𝑎
o Many questions will have you use both formulas for Torque, then substitute 𝛼 = 𝑟
Angular Momentum (kg·m/s2 ) is a lot like linear momentum, but for rotating objects
o 𝑝 = 𝑚𝑣 is linear momentum and is 𝐿 = 𝐼𝜔 angular momentum
o Conserved in the absence of external torque (like friction or gravity)
o 𝐿𝑖 = 𝐿𝑓 o 𝐼𝑖 𝜔𝑖 = 𝐼𝑓 𝜔𝑓
o This means as I gets smaller, ω gets bigger and the object rotates faster, and vice versa
An ice skater starts spinning with her arms out, then pulls arms in and spins faster
Rotational Kinetic Energy is a lot like Translational Kinetic Energy, but for rotating objects
o Ktranslational = ½ mv2 and Krotational = ½ Iω2
o Use this in Conservation of Energy problems and Rolling problems
10
Once again, every angular variable has a linear counterpart. This table shows that the better
you understand how to move from one to the other, the better you will do and the fewer
formulas you will have to know
11
10. Simple Harmonic Motion
12
11. Electric charge and force
Electrostatics involves the interactions between charges (q or Q) and electric fields (E).
o Causes force (F), electric potential (V), and electric potential energy (U) between
charged particles and charged plates.
o Considered static since the charges are not transferred between objects.
Point Charge (q): A quantity of charge that can be reduced to a single point.
o The unit of charge is the Coulomb (C), but it’s large so usually you see μC or even nC
o A charged sphere, where all of the charge acts as though it is located in the center, is
similar to gravity where all of the gravity is mathematically located at a planets center.
Individual protons and electrons and clusters of these particles are point charges.
Charge is conserved: Charges cannot be created or destroyed.
Charge is quantized: All charges are a multiple of the charge on an electron -1.6x10-19 C.
Electricity vs. Gravity: They are both fields and share many characteristics, but have a few
critical differences. The charts below compare these two important field forces to one another.
13
14
15
16
12. DC circuits
17
18
13. Mechanical waves and sound
19
20