Appendix C - ISO Stitch Type Guide
Appendix C - ISO Stitch Type Guide
Single Thread Chainstitch or * 304 Lockstitch is 101 Buttonsew, 1) Buttonsew - specify Knit Shirts - Buttonhole length generally is 1/2 inch, is
Lockstitch Buttonsew, preferred when stitch Buttonhole, or stitches per cycle placed horizontally, with approximately 85-90 stitches
or Bartack (Ex. 8,16, 32)
Buttonhole or Bartack security is a Must.
304 2)BH - specify length
& width (1/2”, etc.)
3) Bartack - specify
length & width of
tack.
Single Thread Blindstitch No stitch visible on the 103 Blindstitch Specify Stitch is formed with one needle thread that is
Bottom or Outside of Sewn Hemming, 1) SPI 3 - 5 SPI interlooped with itself on the top surface of the
Product Felling, Making 2) Non-skip or 2 to 1 material. The thread passes through the top ply and
Belt Loops skipped stitch horizontally through portions of the bottom ply without
completely penetrating it the full depth.
Lockstitch - Most Common of Bobbin Thread on Bottom 301 Topstitching, Specify SPI. Stitch formed by a needle thread passing through the
All Stitches Single Needle material and interlocking with a bobbin thread with the
Stitching, Straight threads meeting in the center of the seam. Stitch
Stitching looks the same top & bottom.
Zig Zag Lockstitch 304 Intimate Apparel, Specify Stitch is formed with a needle and a bobbin that are
Athletic wear, 1) SPI set in the center of the seam and form a symmetrical
Infantwear, 2) Throw or width zig-zag pattern. Also, used to identify bartacking and
Exercisewear Zig-Zag (1/8”, 3/16”, lockstitch buttonsewing and buttonholing.
1/4")
Chainstitch Looper Thread on Bottom 401 Single Needle Specify SPI. Stitch formed by 1-needle thread passing through the
Chainstitch - material and interlooped with 1-looper thread and
Mainseams on pulled up to the underside of the seam.
Wovens
Zig Zag Chainstitch Looper Thread on Bottom 404 Zig-Zag Specify Stitch is formed with a needle and a looper that are
Chainstitch for 1) SPI set on the underside of the seam and form a
Infantwear and 2) Throw or width Zig- symmetrical zig-zag pattern.
Childrenswear: Zag (1/8”)
Binding,
Topstitching, etc.
Version - Confidential and business proprietary information for Under Armour, Inc. 1
Oct 2014 and recognized business partner use only.
Stitch Drawing ISO 4915 Common
Top View As Sewn Bottom View As Sewn Number Application Requirements Stitch Description
2 Needle Bottom Coverstitch Looper Thread on Bottom 406 Hemming, Specify Stitch formed by 2-needle threads passing through the
Attaching, Elastic, 1) Needle spacing material and interlooping with 1-looper thread with the
Binding, (1/8”, 3/16”, 1/4") stitch set on the underside of the seam. Looper thread
Coverseaming, 2) SPI interlooped between needle threads providing seam
Making Belt coverage on the bottom side only.
Loops
3 Needle Bottom Coverstitch Looper Thread on Bottom 407 Attaching Elastic Specify Stitch formed by 3-needle threads passing through the
to Men's & Boys 1) Needle spacing material and interlooping with 1-looper thread with the
Knit Underwear (1/4") stitch set on the underside of the seam. Looper thread
2) SPI is interlooped between needle threads providing seam
coverage on the bottom side only.
2 Needle Chainstitch with Looper Thread on Bottom 408 Attaching Pocket Stitch formed by 2-needle threads passing through the
Cover Thread Facings to Jeans material and interlooping with 2-looper threads with
& Chino Casual the stitches set on the underside of the seam. A top
Pants spreader thread is interlaced on the top side of the
seam between the two needle threads.
2 Thread Overedge Single "purl" on Edge 503 Serging & Specify Stitch formed by 1-needle thread and 1-looper thread
Blindhemming 1) Width Bite (Ex. with purl on edge of seam for serging or
1/8", 3/16", 1/4") blindhemming ONLY.
2) SPI.
3 Thread Overedge Common Overedge Stitch 504 Single Needle Specify Stitch formed with 1-needle thread and 2-looper
Overedge 1) Width Bite (Ex. threads with the looper threads forming a purl on the
Seaming 1/8", 3/16", 1/4") edge of the seam. For overedge seaming and serging.
2) SPI.
3 Thread Overedge Double "purl" on Edge 505 Serging with Specify Stitch formed with 1-needle thread and 2-looper
Double purl on 1) Width Bite (Ex. threads with the looper threads forming a double purl
Edge 1/8", 3/16", 1/4") on the edge of the seam for serging ONLY.
2) SPI.
Mock Safety Stitch 2 Needle Overedge 512 Seaming Stretch Specify SPI. Stitch formed with 2-needle threads and 2 looper
Knits, Wovens threads with the looper threads forming a purl on the
edge of the seam. 512 – right needle only enters the
upper looper loop. Stitch does NOT chain-off as well
as 514 Stitch
2 Needle 4 Thread Overedge 2 Needle Overedge 514 Seaming Stretch Specify SPI. Stitch formed with 2-needle threads and 2 looper
Knits, Wovens threads with the looper threads forming a purl on the
edge of the seam. 514 – both needles enter the upper
looper loop. Preferred over 512 Stitch because it
chains-off better.
Version - Confidential and business proprietary information for Under Armour, Inc. 2
Oct 2014 and recognized business partner use only.
Stitch Drawing ISO 4915 Common
Top View As Sewn Bottom View As Sewn Number Application Requirements Stitch Description
4 Thread Safetystitch 515 Safetystitch Specify Combination stitch consisting of a single-needle
Seaming Wovens 1) Needle spacing & chainstitch (401) and a 2-thread Overedge stitch (503)
(401+503)
& Knits bite - Ex.: 1/8”- that are formed simultaneously. Uses less thread than
1/8", 3/16”- 3/16"’ a 516 stitch; however, many manufacturers prefer a
3/16” – 1/4" 516 stitch.
2) SPI
5 Thread Safetystitch 516 Safety Stitch Specify Combination stitch consisting of a single-needle
Seaming Wovens 3) Needle spacing & chainstitch (401) and a 3-thread Overedge stitch (504)
(401+504)
& Knits bite - Ex.: 1/8”- that are formed simultaneously.
1/8", 3/16”- 3/16"’
3/16” – 1/4"
4) SPI
2 Needle 4 Thread Coverstitch 602 Binding A Shirts, Specify Stitch formed with 2-needle threads, a top cover
Infants Clothing, 1) Needle spacing thread and a bottom looper thread.
etc. (Ex: 1/8", 3/16",
1/4")
2) SPI
3 Needle 5 Thread Coverstitch 605 Lap Seaming, Specify Stitch formed with 3-needle threads, a top cover
Coverseaming, 1) Needle spacing thread and a bottom looper thread.
Binding on Knits (Ex: 1/4")
2) SPI
4 Needle 6 Thread Coverstitch Flatseamer/Flatlock 607 Flat or Lap Specify SPI Stitch formed with 4-needle threads, a top cover
Seaming Knit thread and a bottom looper thread. Preferred over 606
Underwear, stitch because machines are easier to maintain.
Fleece, etc.
Version - Confidential and business proprietary information for Under Armour, Inc. 3
Oct 2014 and recognized business partner use only.